REPLACEMENT PARTS LIST FOR MODELS:

Transcription

1 Product information presented here reflects conditions at time of publication. Consult factory regarding discrepancies or inconsistencies. MAIL TO: P.O. BOX Louisville, KY SHIP TO: 364 Cane Run Road Louisville, KY TEL: (502) (00) 2-PUMP FAX: (502) Visit our web site: zoellerpumps.com SECTION: FM Supersedes 0414 REPLACEMENT PARTS LIST FOR MODELS: M322 AUTOMATIC 115V N322 NONAUTOMATIC 115V D322 AUTOMATIC 2V E322 NONAUTOMATIC 2V Consult factory for all other models TO ORDER REPLACEMENT PARTS: PLEASE FURNISH THE FOLLOWING INFORMATION: Model Number. Part Number of Pump. (If manufactured prior to June 1, give 2 letter date code following Model No.) Part Number and Description of part. L1 L2 BLACK SWITCH 1 3 COM 2 4 NC GREEN WHITE WHITE WHITE BLACK BLACK FLOAT GREEN CAPACITOR GREEN BLACK BLUE RED (1) (2) WHITE (3) BLUE RED YELLOW MOTOR O.L. START RUN WIRING DIAGRAM FOR MODELS M322 All Revisions and D322 All Revisions 10/7 (WT) to Current WIRING DIAGRAM FOR MODELS N322 All Revisions and E322 All Revisions 10/7 (WT) Current Copyright 2017 Zoeller Co. All rights reserved. 1

2 REPLACEMENT PARTS LIST FOR MODEL M322 REF. NO. DESCRIPTION QTY NOTES MODELS: M322-A M322-B M322-C M322-D M322-E M322-F 10/7 WT 5/2 6/2 11/2 12/2 /4 10/4 /01 10/01 5/10 6/10 Current 1 Handle Cover & Handle Gasket, Case or Cover Wire Pkg Capacitor & Clamp Asm Seal, Thru Wall Term Mtr. Hsg, Brg, Stator & Term Bearing, Sleeve N/A Bearing, Radial 1 N/A N/A N/A N/A N/A Rotor (115V/2V)-GE Rotor (115V/2V)-Emerson N/A 10 Bearing, Lower Seal, Mtr Hsg Adapter Seal, Shaft Impeller Pump Housing Plug Oil, Dielectric Flange Pkg Flange Pkg Case Handle & Arm Guard Arm & Seal Asm Case & Switch Switch Asm Gasket, Case or Cover Housing, Switch Float Float Rod Asm Float-Mach Cord Term & Seal Strain Relief Seal Asm & Strain Relief Seal Asm, Conduit Seal Asm, Conduit Cordage, Conduit & Seals Conduit Cordage & Terms Clamp, #60 SS Worm Wirenut Connector Screw, # x.75 RHM SL-SS Screw, #6-32x.25 RHM SL STLGR Screw,.313-1x1 HH CAP-SS Screw, #10-24 x.375 RHM SL-SS Screw, #6-32x.375 RHSL STL Screw,.5-13x2 HH CAP-SS Washer, SS-1.25 ODx.562 IDx Screw,.25-20x1 HHM-SS Clamp, #40 SS Worm Rebuild Kit Items included in Rebuild Kit. Not shown in illustration. See page 6 for illustrations. NOTES: 1) Strain Relief (Item ) can be purchased separately, but is included with Cord, Terminal & Seal Assembly (Item 2) and with Seal, Cord Assembly (Items 31, 32 and 33). 2) Mtr. Hsg., Brg., Stator & Term. (Item 7) are preassembled at the factory and must be replaced as a unit. Stator is permanently attached to the Motor Housing. Plug (Item 16); Seal, Thru Wall Term. (Item 6) and Bearing - Upper (Item are replaceable). 3) When ordering Motor Housing, Bearing, Stator and Term. (Item 7) or Rotor (Item) specify either GE or Emerson motor. GE motor can be identified by (4) holes spaced at 0 around the outside diameter of the stator. Emerson motor can be identified by (4) flat edges spaced at 0 around the outside diameter of the stator. 4) See FM0160 Parts Price Sheet for listing of parts prices. 5) NA indicates, not applicable. 6) Dischange pipe size determines clamp size to order. When using 3 dischange pipe, do not order clamp 0044; instead order (3) Copyright 2017 Zoeller Co. All rights reserved. 2

3 REPLACEMENT PARTS LIST FOR MODEL D322 REF. NO. DESCRIPTION QTY NOTES MODELS: D322-A D322-A D322-B D322-C D322-D D322-E D322-F 10/7 WT 5/2 6/2 11/2 12/2.4 10/4 /01 10/01 5/10 6/10 Current 1 Handle Cover & Handle Gasket, Case or Cover Wire Pkg Capacitor & Clamp Asm Seal, Thru Wall Term Mtr. Hsg, Brg, Stator & Term Bearing, Sleeve N/A Bearing, Radial 1 N/A N/A N/A N/A N/A Rotor (115V/2V)-GE Rotor (115V/2V)-Emerson N/A 10 Bearing, Lower Seal, Mtr Hsg Adapter Seal, Shaft Impeller Pump Housing Plug Oil, Dielectric Flange Pkg Flange Pkg Case Handle & Arm Guard Arm & Seal Asm Case & Switch Switch Asm Gasket, Case or Cover Housing, Switch Float Float Rod Asm Float-Mach Cord Term & Seal Strain Relief Seal Asm & Strain Relief Seal Asm, Conduit Seal Asm, Conduit Cordage, Conduit & Seals Conduit Cordage & Terms Clamp, #60 SS Worm Wirenut Connector Screw, # x.75 RHM SL-SS Screw, #6-32x.25 RHM SL STLGR Screw,.313-1x1 HH CAP-SS Screw, #10-24 x.375 RHM SL-SS Screw, #6-32x.375 RHSL STL Screw,.5-13x2 HH CAP-SS Washer, SS-1.25 ODx.562 IDx Screw,.25-20x1 HHM-SS Clamp, #40 SS Worm Rebuild Kit Items included in Rebuild Kit. Not shown in illustration. See page 6 for illustrations. NOTES: 1) Strain Relief (Item ) can be purchased separately, but is included with Cord, Terminal & Seal Assembly (Item 2) and with Seal, Cord Assembly (Items 31, 32 and 33). 2) Mtr. Hsg., Brg., Stator & Term. (Item 7) are preassembled at the factory and must be replaced as a unit. Stator is permanently attached to the Motor Housing. Plug (Item 16); Seal, Thru Wall Term. (Item 6) and Bearing - Upper (Item are replaceable). 3) When ordering Motor Housing, Bearing, Stator and Term. (Item 7) or Rotor (Item) specify either GE or Emerson motor. GE motor can be identified by (4) holes spaced at 0 around the outside diameter of the stator. Emerson motor can be identified by (4) flat edges spaced at 0 around the outside diameter of the stator. 4) See FM0160 Parts Price Sheet for listing of parts prices. 5) NA indicates, not applicable. 6) Dischange pipe size determines clamp size to order. When using 3 dischange pipe, do not order clamp 0044; instead order (3) Copyright 2017 Zoeller Co. All rights reserved. 3

4 REPLACEMENT PARTS LIST FOR MODEL N322 MODELS: N322-A N322-B N322-C N322-D N322-E N322-F See page 7 for illustrations. REF. NO. DESCRIPTION QTY NOTES 10/7 WT 5/2 6/2 11/2 12/2 /4 10/4 /01 10/01 5/10 6/10 Current 1 Handle Cover & Handle Gasket, Case or Cover Wire Pkg Capacitor & Clamp Asm Seal, Thru Wall Term Mtr. Hsg, Brg, Stator & Term Bearing, Sleeve N/A Bearing, Radial 1 N/A N/A N/A N/A N/A Rotor (115V/2V)-GE Rotor (115V/2V)-Emerson N/A 10 Bearing, Lower Seal, Mtr Hsg Adapter Seal, Shaft Impeller Pump Housing Plug Oil, Dielectric Flange Pkg Flange Pkg Cover, Plate & Gasket 1 N/A Gasket, Case or Cover 1 N/A Housing, Switch 1 N/A Clamp, #60 SS Worm Strain Relief Seal Asm, Conduit Seal Asm, Conduit Cordage, Conduit & Seals Conduit Cordage & Terms Screw, x.75 HHMM-S Screw, #6-32x.25 RHM SL STLGR Screw,.313-1x1 HH CAP-SS Screw, #10-24 x.375 RHM SL-SS Washer, SS-1.25 ODx.562 IDx Screw,.5-13x2 HH CAP-SS Screw,.25-20x1 HHM-SS Handle Retainer, Handle Junction Box Asm N/A N/A N/A N/A N/A Rebuild Kit Items included in Rebuild Kit. Not shown in illustration. NOTES: 1) Strain Relief (Item 23) can be purchased separately, but is included with Cord, Terminal & Seal Assembly (Item 26) and with Seal, Cord Assembly (Items 24 and 25). 2) Mtr. Hsg., Brg., Stator & Term. (Item 7) are preassembled at the factory and must be replaced as a unit. Stator is permanently attached to the Motor Housing. Plug (Item 16); Seal, Thru Wall Term. (Item 6) and Bearing - Upper (Item ) are replaceable. 3) When ordering Motor Housing, Bearing, Stator and Term. (Item ) or Rotor (Item11) specify either GE or Emerson motor. GE motor can be identified by (4) holes spaced at 0 around the outside diameter of the stator. Emerson motor can be identified by (4) flat edges spaced at 0 around the outside diameter of the stator. 4) See FM0160 Parts Price Sheet for listing of parts prices. 5) N/A indicates, not applicable. Copyright 2017 Zoeller Co. All rights reserved. 4

5 REPLACEMENT PARTS LIST FOR MODEL E322 REF. NO. DESCRIPTION QTY NOTES MODELS: E322-A E322-A E322-B E322-C E322-D E322-E E322-F 10/7 WT 5/2 6/2 11/2 12/2 /4 10/4 /01 10/01 5/10 6/10 Current See page 7 for illustrations. 1 Handle Cover & Handle Gasket, Case or Cover Wire Pkg Capacitor & Clamp Asm Seal, Thru Wall Term Mtr. Hsg, Brg, Stator & Term Bearing, Sleeve N/A Bearing, Radial 1 N/A N/A N/A N/A N/A Rotor (115V/2V)-GE Rotor (115V/2V)-Emerson N/A 10 Bearing, Lower Seal, Mtr Hsg Adapter Seal, Shaft Impeller Pump Housing Plug Oil, Dielectric Flange Pkg Flange Pkg Cover, Plate & Gasket 1 N/A Gasket, Case or Cover 1 N/A Housing, Switch 1 N/A Clamp, #60 SS Worm Strain Relief Seal Asm, Conduit Seal Asm, Conduit Cordage, Conduit & Seals Conduit Cordage & Terms Screw, x.75 HHMM-S Screw, #6-32x.25 RHM SL STLGR Screw,.313-1x1 HH CAP-SS Screw, #10-24 x.375 RHM SL-SS Washer, SS-1.25 ODx.562 IDx Screw,.5-13x2 HH CAP-SS Screw,.25-20x1 HHM-SS Handle Retainer, Handle Junction Box Asm N/A N/A N/A N/A N/A Rebuild Kit Items included in Rebuild Kit. Not shown in illustration. NOTES: 1) Strain Relief (Item 23) can be purchased separately, but is included with Cord, Terminal & Seal Assembly (Item 26) and with Seal, Cord Assembly (Items 24 and 25). 2) Mtr. Hsg., Brg., Stator & Term. (Item 7) are preassembled at the factory and must be replaced as a unit. Stator is permanently attached to the Motor Housing. Plug (Item 16); Seal, Thru Wall Term. (Item 6) and Bearing - Upper (Item ) are replaceable. 3) When ordering Motor Housing, Bearing, Stator and Term. (Item ) or Rotor (Item11) specify either GE or Emerson motor. GE motor can be identified by (4) holes spaced at 0 around the outside diameter of the stator. Emerson motor can be identified by (4) flat edges spaced at 0 around the outside diameter of the stator. 4) See FM0160 Parts Price Sheet for listing of parts prices. 5) N/A indicates, not applicable. Copyright 2017 Zoeller Co. All rights reserved. 5

6 REPLACEMENT PARTS ILLUSTRATION FOR MODELS M322 and D SK77 Copyright 2017 Zoeller Co. All rights reserved. 6

7 REPLACEMENT PARTS ILLUSTRATION FOR MODELS N322 and E FOR DATE CODE 10/7 THRU 5/2 ENCLOSURE ITEMS 2,1,20, AND 21 IS ITEM NO. 40 IN PART NO. COLUMN "A". SK2 Copyright 2017 Zoeller Co. All rights reserved. 7

8 NOTES MAIL TO: P.O. BOX Louisville, KY SHIP TO: 364 Cane Run Road Louisville, KY (502) (00) 2-PUMP FAX (502) Visit our web site: zoellerpumps.com Copyright 2017 Zoeller Co. All rights reserved.