Automations for house and building

Transcription

1 Cancelas Persianas Garajes Puertas industriales Cierres metálicos Puertas automáticas Control de accesos Barreras Disuasores de tránsito Catalogue 07 Automations for house and building Opens the future Gates Roller shutters Garages Industrial doors Roll-up doors Automatic doors Access control Barriers Rising bollards

2 EVERY DAY, FOR MORE THAN 25 YEARS, WE AT BFT HAVE BEEN MAKING LIFE FOR MILLIONS OF PEOPLE MORE COMFORTABLE AND MORE SECURE IN MORE THAN ONE HUNDRED COUNTRIES WORLDWIDE.

3 BFT. SMART AUTOMATION FOR MODERN LIVING The quality of living grows every day thanks to innovative products which meet the increasing demands for simplicity, convenience and security. BFT interprets these needs intelligently, studying and building a wide range of technologically advanced and flexible products, capable of meeting any automation need in homes and buildings: gates, garages, shutters and doors.

4 INDEX General information 2007 New products Automations for rack sliding gates Electromechanical and hydraulic automations for swing gates Roller shutter automations Automations for counterweight and spring-operated overhead doors 6. nobody protects you better 7. always at your side 8. how to read this catalogue new products 18. deimos 20. urano 22. icaro 24. sp4000 electromechanical automations for swing gates 30. phobos 32. virgo 34. igea 36. e5 38. eli loop 64. phebe 66. botticelli 68. eos 70. berma hydraulic automations for swing gates 44. oro 46. lux 48. p4,5 p7 50. sub 54. The simplified installation system

5 1 Automations for roll-up, automatic, folding and industrial sectional doors Access control system Automations for road barriers and rising bollards Accessories Kit products Agenzie Our services automations for roll-up doors 74. x130 automations for automatic doors 78. linea automations for folding doors 88. forb 88. igea lb bt automations for industrial sectional doors 92. ulisse 96. compass automations for road barriers 100. bgv 102. moovi automations for rising bollards 106. stoppy 113. accessories 126. Kit products 130. BFT tools for installers 131. BFT certifications 132. EElink protocol 134. the BFT warranty 135. conditions of sale 136. the plus of BFT on the territory 138. alphabetical index

6 NOBODY PROTECTS YOU BETTER Thanks to know-how developed in over 25 years and the use of avant-garde materials and technologies, BFT is a synonym for absolute reliability. The entire range has been designed scrupulously to guarantee ease of use and, at the same time, prevent risks to persons, pets and property. Every single operator is subjected to strict tests to ensure the maximum functionality. The results are products of the highest level, certified by the most important quality bodies, and are fully compliant with the standards in force.

7 ALWAYS AT YOUR SIDE 1 The intelligence of BFT solutions is not limited to the products. The service also makes the difference: BFT is always close to its customers with a capillary network of installers and professionals who operate throughout Italy and all over the world to resolve any technical or commercial question rapidly. Security that lasts and will last in time: the quality of every one of our products is guaranteed by the exclusive BFT Warranty.

8 HOW TO READ THIS CATALOGUE Find the type of operator you are interested in (sliding, swing, overhead) in the index. Follow the navigation bar and go to the presentation page. The new BFT catalogue has been realized to facilitate the selection of the most appropriate operator for your needs. Thanks to the "Selection Guide" which introduces the features of every product family, finding the right BFT system has never been so easy. Furthermore, the sections dedicated to each model illustrate the variants, technical specifications, installation details and advantages. INDICE Informazioni generali 6. nessuno sa custodirti meglio 7. sempre al tuo fianco 8. come leggere questo catalogo Novità novità deimos 20. urano 22. icaro 24. sp4000 Automazioni per cancelli scorrevoli Automazioni per cancelli scorrevoli 18. deimos 20. urano 22. icaro 24. sp4000 Automazioni elettromeccaniche ed oleodinamiche per cancelli ad anta battente automazioni elettromeccaniche per cancelli ad anta battente 30. phobos 32. virgo 34. igea 36. e5 38. eli 250 automazioni oleodinamiche per cancelli ad anta battente 44. oro 46. lux 48. p4,5 p7 50. sub 54. FAST NET - il sistema semplificato di installazione Automazioni per tapparelle Automazioni per porte basculanti e sezionali residenziali 58. loop automazioni per porte basculanti 64. phebe 66. botticelli 68. eos Automazioni per serrande, Sistema di controllo accessi Automazioni Accessori Prodotti in Kit porte automatiche, porte per barriere stradali e guida agli impianti a libro e porte sezionali e dissuasori di passaggio industriali automazioni per serrande 94. compass automazioni per barriere stradali 108. accessori 126. prodotti in kit 74. x bgv 130. guida agli impianti 100. moovi automazioni per porte automatiche 78. linea dissuasori di passaggio 104. stoppy automazioni per porte a libro 86. forb 86. igea lb bt automazioni per porte sezionali industriali 90. ulisse Agenzie I nostri servizi 156. gli strumenti per l installatore 157. le certificazioni 158. il protocollo eelink 160. garanzia totale bft 161. condizioni di vendita 162. la forza di bft sul territorio 163. le agenzie di rappresentanza 164. i centri di assistenza tecnica 166. indice alfabetico 1

9 Name of the product family and type. Fast consultation table. Type of use of the operator. Presence of a model powered at 24 volts. TECNOLOGIA INTELLIGENTE. > I finecorsa magnetici incorporati permettono precisione e costanza nel posizionamento, > Compatibile con il protocollo EElink. SICUREZZA D UTILIZZO. > I finecorsa magnetici incorporati permettono precisione e costanza nel posizionamento, > Compatibile con il protocollo EElink. > Compatibile con EElink. P SCS 1 MA Scheda per gestire con test MA fino a 4 coppie di fotocellule su quadri QSC-MA-D. E??? - MAX 1 P SCS 1 Scheda connessione seriale per QSC- MA-D e RIGEL 5. E? - MAX - 1 D CFZ Cremagliera in acciaio 22x22 modulo 4 zincata. Spezzoni da 2 m, in confezioni da 10 m. E 16,9 - MAX 10 D CVZ Cremagliera in acciaio 30x12 modulo 4 zincata, forata con supporto. Spezzoni da 1 m, in confezioni da 10 m. E 16,9 - MAX 10 N CSP 10 Profilo costa passiva lunghezza 1000 mm E 34,1 - MAX 2 N CSP 20 Profilo costa passiva lunghezza 2000 mm E 55,3 - MAX 2 N CSP 25 Profilo costa passiva lunghezza 2500 mm E 67 - MAX 2 P SB BAT Il kit SB BAT garantisce, grazie alle sue batterie tampone e al carica batterie, il funzionamento in assenza di corrente (DEIMOS BT). E 83,2 - MAX 2 Example of a complete system. Description of the main advantages of the family. INSTALLAZIONE PIÙ SEMPLICE. > I finecorsa magnetici incorporati permettono precisione e costanza nel posizionamento, > Compatibile con il protocollo EElink. > I finecorsa magnetici incorporati permettono precisione e costanza nel posizionamento, > Compatibile con il protocollo EElink. N CVZ-S Cremagliera in acciaio 30x8 modulo 4 zincata, forata con supporto. Spezzoni da 1m, in confezione da 10 m. E 13 - MAX 10 D CP Cremagliera in plastica 22x22 modulo 4 con asole di regolazione. Spezzoni da 1 m. E 14,6 - MAX 10 N SFD Confezione sistema di fissaggio E 8,1 - MAX 2 Drawing and dimensions of the operator. Comparative table of the main technical characteristics of the products in the family. Set of dedicated accessories.

10 104 Evolution never stops in BFT. Once again 2007 sees the design and realization of new systems, capable of meeting growing demands in terms of comfort and security.

11 2007 NEW PRODUCTS COMPASS SLIM CELLULA RFL CLONIX 4 RTE ALTAIR P ALCOR N EOS 120 PHOBOS N PHOBOS N BT PROXIMA FLC 8K2 NEWS NEWS NEWS NEWS NE NEWS NEWS NEWSNE SNEWSNEW 11

12 12 COMPASS SLIM Proximity reader. See page 96 CELLULA RFL Flat reflection photocell. See page 113 CLONIX 4 RTE Four-channel rolling code receiver. See page 113 ALTAIR P Universal control unit for one or two motors of the electromechanical swing type. See page 113 ALCOR N Control unit for one or two motors of the hydraulic swing type. See page 113

13 2007 NEW PRODUCTS Fast Net Eli 250 BT Botticelli Ventimiglia Libra C Ma Rigel 5 Leo D MA Ulisse13 EOS 120 Electromechanical operator for spring-operated overhead doors. See page 68 PHOBOS N PHOBOS N BT Electromechanical operator for swing gates. See page 30 PROXIMA New-generation universal handheld programmer. See page 113 FLC 8K2 Control device for resistive 8.2KOhm safety edges. See page 113

14 14 Designed to measure, BFT operators for sliding gates work in any weather conditions. Tested for their entire life cycle, extremely practical and designed to permit simple and immediate maintenance, they guarantee the maximum reliability even with continuous service.

15 Solutions for the automation of sliding gates DEIMOS URANO BT ICARO MA SP4000

16 SLIDING GATES 16 Legend DEIMOS DEIMOS BT DEIMOS 700 URANO BT ICARO SP4000 Suggested automation Possible option up to 500 Kg residential apartment-block industrial up to 700 Kg residential apartment-block sliding gates industrial residential up to 1200 Kg apartment-block industrial up to 2000 Kg up to 4000 Kg residential, apartmentblock and industrial industrial

17 SELECTION GUIDE 1717

18 DEIMOS SERIES Electromechanical automation for rack sliding gates 18 CODE DESCRIPTION VOLTAGE LEAF WEIGHT PRICE e Q.TY X PALLETS R R P P P P DEIMOS BT KIT DEIMOS KIT DEIMOS 700 DEIMOS BT DEIMOS DEIMOS SQ 24 V 230 V 230 V 24 V 230 V 230 V up to 5000 N (~500 kg) up to 5000 N (~500 kg) up to 7000 N (~700 kg) up to 5000 N (~500 kg) up to 5000 N (~500 kg) up to 5000 N (~500 kg) 457,60 457,60 419,30 367,10 354,80 273, SMART TECHNOLOGY. > Electromechanical microswitches (inductive in the PROX version) that control the end stroke. > Incorporated two-channel rolling code radio receiver. > Control unit with self-learning and self-diagnostic functions. > Control unit compatible with the EElink protocol. SAFE USE. > The version powered at 24V has been specially designed for simpler and faster installation in compliance with the safety standards laid down by the Machinery Directive. > Thanks to the antisquashing system, the operator inverts motion and prevents damage to people and property in the event of contact (BT). SIMPLER INSTALLATION. > Incorporated control unit positioned frontally for easier accessibility. > Control unit with programming by LCD display (BT). Control panel Reversible/irreversible operator Power supply Absorbed power Thermal protection Leaf speed Output revolutions Pinion pitch Impact reaction Type of limit switches Manual release Operating cycle Environmental conditions Degree of protection Operator weight Dimensions TECHNICAL FEATURES DEIMOS BT DEIMOS DEIMOS 700 QSC D MA (incorporated) ALPHA (incorporated) irreversible irreversible 230V~ ± 10%, 50 Hz single-phase 230V~ ± 10%, 50 Hz single-phase 70 W 290 W integrated in the control unit integrated 12 m/min 8,5 m/min 79 min-1 48 min-1 4 mm (14 teeth) 4 mm (14 teeth) electronic torque limiter mechanical clutch electromechanical or inductive electromechanical or inductive mechanical release with knob mechanical release with knob intensive use semi intensive use from -15 C to + 60 C from -15 C to + 60 C IP24 IP24 70 N (~7 kg) 150 N (~15 kg) see drawing see drawing ALPHA (incorporated) irreversible 230V~ ± 10%, 50 Hz single-phase 290 W integrated 8,5 m/min 48 min-1 4 mm (14 teeth) mechanical clutch electromechanical or inductive mechanical release with knob semi intensive use from -15 C to + 60 C IP N (~15 kg) see drawing

19 RESIDENTIAL AND INDUSTRIAL USE 19 ACESSORIES P SCS 1 Serial connection board for QSC D MA, RIGEL 5 and ALTAIR P. e 10,40 N CSP 20 Shock absorber profile, length 2000 mm. e 53,10 D CFZ 22x22 4-pitch galvanised steel rack. 2 m lengths in 10 m packs. e 16,10 N CSP 25 Shock absorber profile, length 2500 mm. e 64,20 D CVZ 30x12 4-pitch drilled galvanised steel rack with support. 1 m lengths in 10 m packs. e 17,70 N CVZ-S 30x8 4-pitch drilled galvanised steel rack with support. 1 m lengths in 10 m packs. e 12,80 P SB BAT Thanks to the back-up batteries and battery charger, the SB BAT kit guarantees low voltage operation in the event of power failure. For DEIMOS BT model. e 81,30 N SFD Fixing system pack. e 7,20 DIMENSIONS D CP 22x22 4-pitch plastic rack with adjustment slots. 1 m lengths. e 15,00 N MSC Personalised key release knob. e 10, N CSP 10 Shock absorber profile, length 1000 mm. e 32,

20 URANO BT Electromechanical automation for rack sliding gates 20 CODE DESCRIPTION VOLTAGE LEAF WEIGHT PRICE e Q.TY X PALLETS P URANO BT 24 V up to N (~1200 kg) 520,00 24 SMART TECHNOLOGY. > Electromechanical microswitches (inductive in the PROX version) that control the end stroke. > Incorporated two-channel rolling code radio receiver. > Control unit with self-learning and self-diagnostic functions. > Control unit compatible with the EElink protocol. SAFE USE. > Specially designed for simpler and faster installation in compliance with the safety standards laid down by the Machinery Directive. > Thanks to the antisquashing system, the operator inverts motion and prevents damage to people and property in the event of contact (BT). SIMPLER INSTALLATION. > Incorporated control unit positioned frontally for easier accessibility. > Control unit with programming by LCD display. Control panel Reversible/irreversible operator Power supply Absorbed power Thermal protection Leaf speed Output revolutions Pinion pitch Impact reaction Type of limit switches Manual release Operating cycle Environmental conditions Degree of protection Operator weight Dimensions TECHNICAL FEATURES URANO BT QSC D MA (incorporated) irreversible 230V~ ± 10%, 50 Hz single-phase 80 W integrated in the control unit 9 m/min 39 min-1 4 mm (18 teeth) electronic torque limiter electromechanical or inductive mechanical release with knob very intensive use from -15 C to + 60 C IP N (~20 kg) see drawing

21 APARTMENT-BLOCK AND INDUSTRIAL USE 21 ACCESSORIES P SCS 1 Serial connection board for QSC D MA, RIGEL 5 and ALTAIR P. e 10,40 N CSP 20 Shock absorber profile, length 2000 mm. e 53,10 D CFZ 22x22 4-pitch galvanised steel rack. 2 m lengths in 10 m packs. e 16,10 N CSP 25 Shock absorber profile, length 2500 mm. e 64,20 D CVZ 30x12 4-pitch drilled galvanised steel rack with support. 1 m lengths in 10 m packs. e 17,70 N CVZ-S 30x8 4-pitch drilled galvanised steel rack with support. 1 m lengths in 10 m packs. e 12,80 P BT BAT2 The BT BAT 2 device ensures, through its back up batteries and battery charger, low-voltage operations when there is no power supply (URANO BT). e 81,30 N SFI Fixing system pack. e 7,90 DIMENSIONS Z18 p72 D CP 22x22 4-pitch plastic rack with adjustment slots. 1 m lengths. e 15,00 D KI Release key blank for ICARO, URANO BT, IGEA, IGEA BT. e 2, N CSP 10 Shock absorber profile, length 1000 mm. e 32,

22 ICARO MA Electromechanical automation for rack sliding gates 22 CODE DESCRIPTION VOLTAGE LEAF WEIGHT PRICE e Q.TY X PALLETS P ICARO MA 230 V up to N (~2000 Kg) 735,30 16 SMART TECHNOLOGY. > Incorporated two-channel rolling code radio receiver ready for connecting a second receiver. > Control unit with self-learning and self-diagnostic functions of the parameters: brake, torque, antisquashing. > Control unit compatible with the EElink protocol. SAFE USE. > Thanks to the antisquashing system, the operator inverts motion and prevents damage to people and property in the event of contact. SIMPLER INSTALLATION. > Incorporated control unit positioned frontally for easier accessibility. > Control unit with programming by LCD display. Control panel Reversible/irreversible operator Power supply Absorbed power Thermal protection Leaf speed Output revolutions Pinion pitch Impact reaction Type of limit switches Manual release Operating cycle Environmental conditions Degree of protection Operator weight Dimensions TECHNICAL FEATURES ICARO MA LEO D MA (incorporated) irreversible 230V~ ± 10%, 50 Hz single-phase 750 W integrated 9 m/min 37 min-1 4 mm (18 teeth) electronic clutch with encoder electromechanical or inductive mechanical release with knob very intensive use from -15 C to + 60 C IP N (~25 kg) see drawing

23 APARTMENT-BLOCK AND INDUSTRIAL USE 23 ACCESSORIES D CFZ 22x22 4-pitch galvanised steel rack. 2 m lengths in 10 m packs. e 16,10 N SFI Fixing system pack. e 7,90 D CVZ 30x12 4-pitch drilled galvanised steel rack with support. 1 m lengths in 10 m packs. e 17,70 D KI Release key blank for ICARO, URANO BT, IGEA, IGEA BT. e 2,30 N CVZ-S 30x8 4-pitch drilled galvanised steel rack with support. 1 m lengths in 10 m packs. e 12,80 N CSP 10 Shock absorber profile, length 1000 mm. e 32,70 DIMENSIONS N CSP 20 Shock absorber profile, length 2000 mm. e 53,10 Z18 Øp N CSP 25 Shock absorber profile, length 2500 mm. e 64,

24 SP4000 Electromechanical automation for rack sliding gates 24 CODE DESCRIPTION VOLTAGE LEAF WEIGHT PRICE e Q.TY X PALLETS P SP /400 V three-phase up to N (~4000 Kg) 2879,70 3 SMART TECHNOLOGY. > Hydrodynamic joint for smooth gate starts and stops. SAFE USE. > The strength and compactness of the structure guarantee the maximum reliability of operation over time. > The operator makes it possible to automate any type of gate, even the heaviest. Control panel Reversible/irreversible operator Power supply Absorbed power Thermal protection Leaf speed Output revolutions Pinion pitch Impact reaction Type of limit switches Manual release Operating cycle Environmental conditions Degree of protection Operator weight Dimensions TECHNICAL FEATURES SP4000 SIRIO TEL (incorporated) 230/400V~ ± 10%, 50 Hz three-phase 1500 W overload cutout inside the control panel 9 m/min 30 min-1 6 mm (18 teeth) with edge and/or external devices electromechanical or inductive mechanical release with knob very intensive use from -15 C to + 60 C IP N (~85 kg) see drawing

25 INDUSTRIAL USE 25 ACCESSORIES D CFZ6 30x30 6-pitch rack. 2 m lengths.. e 34,70 P BASP Adjustable anchoring base. e 92,30 DIMENSIONS 52 Z18 Øp

26 26 Easy to install, BFT operators for swing gates ensure the maximum safety and ease of use. Their high versatility of use also makes them perfect in prestigious architectural contexts. Moreover, all the maintenance operations are particularly simple, fast and intuitive.

27 Electromechanical solutions for the automation of swing gates serie PHOBOS phobos virgo VIRGO kit E5 IGEA serie E5 igea serie ELI 250 eli

28 ELECTROMECHANICAL SWING GATES 28 Legend ELI 250 BT PHOBOS BT PHOBOS BT L VIRGO E5 IGEA IGEA BT Suggested underground automation Suggested external automation Possible option up to 1,8 m up to 200 Kg up to 250 Kg up to 400 Kg up to 200 Kg electromechanical swing gates up to 2 m up to 250 Kg up to 400 Kg up to 2,5 m up to 250 Kg up to 400 Kg up to 3,5 m up to 250 Kg up to 5 m up to 250 Kg

29 SELECTION GUIDE 2929

30 PHOBOS SERIES Electromechanical operator for swing gates CODE DESCRIPTION VOLTAGE LEAF WEIGHT LEAF LENGTH PRICE e Q.TY X PALLETS 30 P R R P R P P P PHOBOS BT* PHOBOS BT KIT PHOBOS BT L KIT PHOBOS* PHOBOS KIT PHOBOS L PHOBOS N BT PHOBOS N 24 V 24 V 24 V 230 V 230 V 230 V 24 V 230 V up to 2500 N (~250 kg) up to 2500 N (~250 kg) up to 2500 N (~250 kg) up to 2500 N (~250 kg) up to 2500 N (~250 kg) up to 2500 N (~250 kg) up to 2500 N (~250 kg) up to 2500 N (~250 kg) up to 1.80 m up to 1.80 m up to 5 m (with electric lock), 3 m (without electric lock) * up to 1.80 m up to 1.80 m up to 5 m (with electric lock), 3 m up to 1,80 m up to 1,80 m (without electric lock) 229,70 658,90 704,80 224,30 629,50 236,00 229,70 224, * Available while stock last > New compact lengthened design (PHOBOS N and PHOBOS N BT) SMART TECHNOLOGY. > Magnetic limit switches and release, efficient even at low temperatures (PHOBOS N and PHOBOS N BT). > Only 18 seconds for 90 opening (PHOBOS N and PHOBOS N BT) > Control unit compatible with the EElink protocol. SAFE USE. > The version powered at 24V has been specially designed for simpler and faster installation in compliance with the safety standards laid down by the Machinery Directive. > Thanks to the antisquashing system, the operator inverts motion and prevents damage to people and property in the event of contact (BT). SIMPLER INSTALLATION. > BFT s system of coded limit switches makes it possible to reduce the complexity of wiring the lowvoltage motors: a single wire is carried to the control panel instead of the three normally required, thereby increasing the simplicity and speed of installation. Furthermore, the system is able to automatically distinguish between the open limit switch and the closed one and hence prevent wasted time and wiring errors (PHOBOS BT and PHOBOS BT L). > The operator is supplied without cable to reduce the installation times (PHOBOS N and PHOBOS N BT) Control panel Reversible/irreversible operator Power supply Absorbed power Thermal protection Rod working stroke Rod speed Opening or closing time Impact reaction Type of unlock Manual release Operating cycle Environmental conditions Degree of protection Operator weight Dimensions TECHNICAL FEATURES PHOBOS N BT PHOBOS BT L PHOBOS N PHOBOS L LIBRA C MA (suggested) irreversible 230V~ ± 10%, 50 Hz single-phase 40 W integrated in the control unit 305 mm 20 mm/s 18 s torque limiter integrated in the control panel mechanical on opening/closing release key very intensive use from -20 C to + 50 C IPX4 50 N (~5 kg) see drawing LIBRA C MA (suggested) irreversible 230V~ ± 10%, 50 Hz single-phase 40 W integrated in the control unit 410 mm 15 mm/s - torque limiter integrated in the control panel mechanical on opening/closing release key very intensive use from -10 C to + 50 C IPX4 65 N (~6,5 kg) - ALTAIR P (suggested) irreversible 230V~ ± 10%, 50 Hz single-phase 210 W integrated 305 mm 20 mm/s 18 s electronic clutch on control panel mechanical on opening/closing release key semi intensive use from -20 C to + 50 C IPX4 50 N (~5 kg) - ALTAIR P (suggested) irreversible 230V~ ± 10%, 50 Hz single-phase 210 W integrated 458 mm 13 mm/sec - electronic clutch on control panel mechanical on opening/closing release key semi intensive use from -10 C to + 50 C IPX4 77 N (~7,7 kg) -

31 RESIDENTIAL USE 31 ACCESSORIES D LIBRA C MA See page 113 e 210,30 N SFR Adjustable back fixing bracket for PHO- BOS / PHOBOS BT. e 34,30 D ALTAIR P See page 113 e 174,10 N SFR L Adjustable back fixing bracket for PHO- BOS L / PHOBOS BT L. e 38,40 D ALTAIR See page 113 Available while stock last. e 169,10 P BT BAT Thanks to the back-up batteries and battery charger, the BT BAT kit guarantees low voltage operation of the leaf in the event of power failure. For PHOBOS BT, PHOBOS BT L, IGEA LB BT and IGEA BT models. e 92,30 D PPE Anchor plate used to weld PHOBOS model brackets e 8,40 P EBP 230 Vac electric lock with zero stop resistance. Also available in 50 mm, 75 mm versions and at 24V. e 63,90 D ECB SX Left-hand horizontal electric lock. Also available in right-hand and vertical versions. e 75,00 D ME 12 Vac electric lock board for ALCOR N model and ALPHA SD model. e 37,80 D CLS Release key for LUX B, ORO, SUB, PHOBOS N and PHOBOS N BT models (10- piece pack). e 0, DIMENSIONS P CPH Rod cover for PHOBOS and PHOBOS BT models. e 13,00 D ME BT 24 Vac electric lock board for BT operators. e 17,20

32 VIRGO Electromechanical operator for swing gates 32 CODE DESCRIPTION VOLTAGE LEAF WEIGHT LEAF LENGTH PRICE e Q.TY X PALLETS R P P VIRGO KIT VIRGO VIRGO SQ 24 V 24 V 24 V up to 2000 N (~200 kg) up to 2000 N (~200 kg) up to 2000 N (~200 kg) up to 2 m up to 2 m up to 2 m 670,80 357,60 215, A MODEL FOR EVERY NEED. > Great versatility thanks to the levers that also permit installation on the pillar and opening up to 120. SMART TECHNOLOGY. > Incorporated mechanical stops and adjustable electric limit switches. > Separate programming of the two motors. > Control unit with self-learning and self-diagnostic functions. > If the motor with the control unit is on the side opposite the one the wires arrive at, the motor logic inversion functions makes it possible to avoid further wiring. > Control unit compatible with the EElink protocol. SAFE USE. > Specially designed for simpler and faster installation in compliance with the safety standards laid down by the Machinery Directive. > Thanks to the antisquashing system, the operator inverts motion and prevents damage to people and property in the event of contact (BT). SIMPLER INSTALLATION. > Incorporated control unit positioned frontally for easier accessibility. > Control unit with programming by LCD display. > Ease of fixing to the pillar without welding. Control panel Reversible/irreversible operator Power supply Absorbed power Thermal protection Opening or closing time Impact reaction Type of lock Manual release Operating cycle Environmental conditions Degree of protection Operator weight Dimensions TECHNICAL FEATURES VIRGO LINX (incorporated) irreversible 230V~ ± 10%, 50 Hz single-phase 40 W integrated in the control unit 14 s electronic torque limiter integrated in the control panel mechanical on closing and opening release lever with CLS key intensive use from -15 C to + 60 C IP44 VIRGO 80 N (~8 kg) - VIRGO SQ 60 N (~6 kg) see drawing

33 RESIDENTIAL USE 33 ACCESSORIES P VIRGO BAT The VIRGO BAT device ensures, through its back up batteries and battery charger, low-voltage operations when there is no power supply (VIRGO). e 82,90 P EBP 230 Vac electric lock with zero stop resistance. Also available in 50 mm, 75 mm versions and at 24V. e 63,90 D ECB SX Left-hand horizontal electric lock. Also available in right-hand and vertical versions. e 75,00 D ME BT 24 Vac electric lock board for BT operators. e 17,20 DIMENSIONS D ME 12 Vac electric lock board for ALCOR N model and ALPHA SD model. e 37,80 230

34 IGEA SERIES Electromechanical operator for swing gates 34 CODE DESCRIPTION VOLTAGE LEAF WEIGHT LEAF LENGTH PRICE e Q.TY X PALLETS P P R IGEA BT IGEA IGEA BT KIT 24 V 230 V 24 V up to 2000 N (~200 kg) up to 2500 N (~250 kg) up to 2500 N (~250 kg) up to 2.5 m up to 2 m up to 2.5 m 305,00 321,00 934, A MODEL FOR EVERY NEED. > Great versatility thanks to the levers that also permit installation on large sized pillars and opening up to 125. TECHNICAL FEATURES IGEA BT IGEA SMART TECHNOLOGY. > Control unit compatible with the EElink protocol. SAFE USE. > The version powered at 24V is specially designed for simpler and faster installation in compliance with the safety standards laid down by the Machinery Directive. > Thanks to the antisquashing system, the operator inverts motion and prevents damage to people and property in the event of contact (BT). SIMPLER INSTALLATION. > BFT s system of coded limit switches makes it possible to reduce the complexity of wiring the low-voltage motors: a single wire is carried to the control panel instead of the three normally required, thereby increasing the simplicity and speed of installation. Furthermore, the system is able to automatically distinguish between the open limit switch and the closed one and hence prevent wasted time and wiring errors (IGEA BT). Control panel Reversible/irreversible operator Power supply Absorbed power Thermal protection Opening or closing time Impact reaction Type of lock Manual release Operating cycle Environmental conditions Degree of protection Operator weight Dimensions LIBRA C MA (suggested) irreversible 230V~ ± 10%, 50 Hz single-phase 40 W - 15 s torque limiter integrated in the control panel mechanical opening/closing release knob with personalised key intensive use from -15 C to + 60 C IP N (~16 kg) see drawing ALTAIR P (suggested) irreversible 230V~ ± 10%, 50 Hz single-phase 300 W integrated 15 s torque limiter integrated in the control panel mechanical opening/closing release knob with personalised key intensive use from -15 C to + 60 C IP N (~16 kg) see drawing

35 RESIDENTIAL USE 35 ACCESSORIES D LIBRA C MA See page 113 e 210,30 N MOX External release mechanism for SIBOX model. e 5,30 D ALTAIR P See page 113 e 174,10 P LRV Reduced levers (IGEA, IGEA BT). e 40,80 D ALTAIR See page 113 Available while stock last. e 169,10 P BT BAT Thanks to the back-up batteries and battery charger, the BT BAT kit guarantees low voltage operation of the leaf in the event of power failure. For PHOBOS BT, PHOBOS BT L, IGEA LB BT and IGEA BT models. e 92,30 D KI Release key blank for ICARO, URANO BT, IGEA, IGEA BT. e 2,30 P EBP 230 Vac electric lock with zero stop resistance. Also available in 50 mm, 75 mm versions and at 24V. e 63,90 D ECB SX Left-hand horizontal electric lock. Also available in righthand and vertical versions. e 750 D ME 12 Vac electric lock board for ALCOR N model and ALPHA SD model. e 37,80 DIMENSIONS 154 N SIBOX Empty safe for external release and control push-button panel. Dimensions: 179.5x122x92 mm. e 40,50 D ME BT 24 Vac electric lock board for BT operators. e 17,

36 E5 Electromechanical operator for swing gates 36 CODE DESCRIPTION VOLTAGE LEAF WEIGHT LEAF LENGTH PRICE e Q.TY X PALLETS P E5 230 V up to 2000 N (~200 kg) up to 1.8 m 258,00 25 A MODEL FOR EVERY NEED. > Multiple installation possibilities thanks to the optional articulated arms (BLE5 or BSE5) which allow the use of the operator on a pillar or very tight spaces. SAFE USE. > Antisquashing protection guaranteed by the adjustable mechanical clutch. TECHNICAL FEATURES E5 Control panel Reversible/irreversible operator Power supply Absorbed power Thermal protection Opening or closing time Impact reaction Type of lock Manual release Operating cycle Environmental conditions Degree of protection Operator weight Dimensions ALCOR N (suggested) reversible 230V~ ± 10%, 50 Hz single-phase 200 W integrated 22 s mechanical clutch electric lock reversible operator semi intensive use from -10 C to + 60 C IP44 80 N (~8 kg) see drawing

37 RESIDENTIAL USE 37 ACCESSORIES D ALCOR N See page 113 e 168,30 D ME BT 24 Vac electric lock board for BT operators. e 17,20 D ALCOR SD See page 113 Available while stock last e 109,10 D ME 12 Vac electric lock board for ALCOR N model and ALPHA SD model. e 37,80 D RIGEL 5 See page 113 e 215,30 D PLE Anchor plate used to weld brackets to masonry pillars.. e 8,90 P EBP 230 Vac electric lock with zero stop resistance. Also available in 50 mm, 75 mm versions and at 24V. e 63,90 D SPL Preheating board for 1 or 2, SUB, ORO, P4,5-P7,BERMA and E5 operator models. Can be fitted inside control panels, models ALPHA SD, ALCOR N. Permits gate opening at regular speed even in particularly cold areas. The operator is able to work at -20 with this accessory. e 40,50 D SSR5 Traffic light and preheating control board for RIGEL 5 control panel. The operator is able to work at -20 with this accessory. e 34, DIMENSIONS D ECB SX Left-hand horizontal electric lock. Also available in right-hand and vertical versions. e 75,

38 ELI SERIES Electromechanical operator for swing gates 38 CODE DESCRIPTION VOLTAGE LEAF WEIGHT LEAF LENGTH PRICE e Q.TY X PALLETS P P P ELI 250 BT ELI 250 ELI 250-V 24 V 230 V 230 V from 2500 N (~250 Kg) to 4000 N (~400 Kg) from 2500 N (~250 Kg) to 3000 N (~300 Kg) up to 1500 N (~150 Kg) from 2,5 m (with electric lock) (without electric lock) to 3,5 m from 2,5 m (with electric lock) (without electric lock) to 3,5 m up to 2 m 300,60 259,20 280, SMART TECHNOLOGY. > The incorporated magnetic limit switches allow positioning precision and constancy, remain unchanged with variations in climatic conditions (ELI 250 BT) and are not subject to wear. > Control unit compatible with the EElink protocol. > Shorter times for the opening and closing operations (ELI 250 BT). SAFE USE. > The version powered at 24V is specially designed for simpler and faster installation in compliance with the safety standards laid down by the Machinery Directive. > Thanks to the antisquashing system, the operator inverts motion and prevents damage to people and property in the event of contact (BT). SIMPLER INSTALLATION > Maintenance is carried out without the need to raise and remove the gate. > The special foundation case makes it possible to extract the operator without removing the gate leaf. Control panel Reversible/irreversible operator Power supply Absorbed power Thermal protection Opening angle Opening or closing time Impact reaction Type of lock Manual release Operating cycle Environmental conditions Degree of protection Operator weight Dimensions TECHNICAL FEATURES ELI 250 BT ELI 250 ELI 250 V LIBRA C MA irreversible 230V~ ± 10%, 50 Hz single-phase 175 W integrated from -10 to s /120 torque limiter integrated in the control panel mechanical release key intensive use from -20 C to + 50 C IP N (~10 kg) see drawing ALTAIR P (suggested) irreversible 230V~ ± 10%, 50 Hz single-phase 280 W integrated from -10 to s / 120 torque limiter integrated in the control panel mechanical release key semi intensive use from -20 C to + 50 C IP N (~10 kg) see drawing ALTAIR P (suggested) irreversible 230V~ ± 10%, 50 Hz single-phase 280 W integrated from -10 to s / 120 torque limiter integrated in the control panel mechanical release key semi intensive use from -20 C to + 50 C IP N (~10 kg) see drawing

39 RESIDENTIAL USE 39 ACCESSORIES D LIBRA C MA See page 113 e 210,30 N CFE Stop pack ELI 250. e 23,50 D ALTAIR P See page 113 e 174,10 N CFE BT Stop pack ELI 250 BT. e 230,00 D ALTAIR See page 113 Available while stock last. e 169,10 N BTCF 120 Universal foundation case for ELI 250 BT, ELI 250, ELI 250 V with levers. e 142,30 P EBP 230 Vac electric lock with zero stop resistance. Also available in 50 mm, 75 mm versions and at 24V. e 63,90 D ECB SX Left-hand horizontal electric lock. Also available in right-hand and vertical versions. e 75, DIMENSIONS 210 N BTCF 120 INOX Foundation case in stainless steel with levers for ELI 250 BT, ELI 250, ELI 250 V. e 299,60 D ME BT 24 Vac electric lock board for BT operators. e 17, N E opening kit for underground operator ELI 250. e 85,90 D ME 12 Vac electric lock board for ALCOR N model and ALPHA SD model. e 37,

40 40 BFT hydrodynamic operators for swing gates ensure the maximum reliability and durability over time. Their high frequency of use makes them particularly suitable for apartment block contexts. Moreover, all the maintenance operations are particularly simple, fast and intuitive.

41 Hydrodynamic solutions for the automation of swing gates serie lux ORO serie LUX oro p4,5 P7 - p7 P4,5 serie SUB sub

42 HYDRAULIC SWING GATES 42 Legend Suggested underground automation Suggested external automation Possible option up to 1,8 m up to 200 Kg up to 250 Kg up to 300 Kg up to 500 Kg up to 800 Kg LUX ORO P4,5 P7 SUB up to 2 m up to 200 Kg up to 300 Kg up to 500 Kg hydraulic swing gates up to 800 Kg up to 200 Kg up to 2,5 m up to 300 Kg up to 500 Kg up to 800 Kg up to 3,5 m up to 4,5 m up to 5 m up to 7 m up to 500 Kg up to 800 Kg up to 500 Kg up to 500 Kg up to 500 Kg

43 SELECTION GUIDE 4343

44 ORO SERIES Hydraulic operator for swing gates 44 CODE DESCRIPTION VOLTAGE LEAF WEIGHT LEAF LENGTH PRICE e Q.TY X PALLETS P R P ORO ORO KIT ORO E 230 V 230 V 230 V up to 1800 N (~180 Kg) up to 1800 N (~180 Kg) up to 2000 N (~200 Kg) up to 1.8 m up to 1.8 m up to 2.5 m 301,30 904,70 295, A MODEL FOR EVERY NEED. > Versions are available that are irreversible when closing (ORO model) and reversible (ORO E model). TECHNICAL FEATURES ORO ORO E SAFE USE. > Antisquashing protection guaranteed by two adjustable bypass valves. Control panel Reversible/irreversible operator Power supply Absorbed power Thermal protection Opening angle Rod speed Opening and closing time Impact reaction Type of lock Manual release Operating cycle Environmental conditions Degree of protection Operator weight Dimensions ALCOR N (suggested) irreversible 230V~ ± 10%, 50 Hz single-phase 240 W integrated 250 mm 12 mm/s 20 s hydraulic clutch hydraulic on closing release key semi intensive use from -10 C to + 60 C IP55 53 N (~5,3 kg) see drawing ALCOR N (suggested) reversible 230V~ ± 10%, 50 Hz single-phase 240 W integrated 250 mm 8 mm/s 27 s hydraulic clutch electric lock reversible semi intensive use from -10 C to + 60 C IP55 53 N (~5,3 kg) see drawing

45 RESIDENTIAL AND APARTMENT-BLOCK USE 45 ACCESSORIES D ALCOR N See page 113 e 168,30 D ME 12 Vac electric lock board for ALCOR N model and ALPHA SD model. e 37,80 D ALCOR SD See page 113 Available while stock last e 109,10 D RIGEL 5 See page 113 e 215,30 D IDROLUX WINTER Hydraulic oil for low temperatures, 2 lt can. Always fill up with oil of the same colour. e 25,00 D PLE Anchor plate used to weld brackets to masonry pillars.. e 8,90 P EBP 230 Vac electric lock with zero stop resistance. Also available in 50 mm, 75 mm versions and at 24V. e 63,90 D ECB SX Left-hand horizontal electric lock. Also available in right-hand and vertical versions. e 75,00 D SPL Preheating board for 1 or 2 LUX, SUB, ORO, P4,5-P7,BERMA and E5 operator models. Can be fitted inside control panels, models ALPHA SD, ALCOR N. Permits gate opening at regular speed even in particularly cold areas. The operator is able to work at -20 with this accessory. e 40, DIMENSIONS D ME BT 24 Vac electric lock board for BT operators. e 17,20 D SSR5 Traffic light and preheating control board for RIGEL 5 control panel. The operator is able to work at -20 with this accessory. e 34,80 70

46 LUX SERIES Hydraulic operator for swing gates 46 CODE DESCRIPTION VOLTAGE LEAF WEIGHT LEAF LENGTH PRICE e Q.TY X PALLETS A MODEL FOR EVERY NEED. > Several versions available: irreversible with hydraulic locking (for holding when closed or closed and open) and reversible (with use of an electric lock). P P P P P P P LUX LUX B LUX MB LUX 2B LUX L LUX G LUX R2BSN2 230 V 230 V 230 V 230 V 230 V 230 V 230 V up to 3000 N (~300 kg) up to 3000 N (~300 kg) up to 3000 N (~300 kg) up to 3000 N (~300 kg) from 3000 N (~300 kg) to 5000 N (~500 kg) from 3000 N (~300 kg) to 8000 N (~800 kg) up to 3000 N (~300 kg) up to 2 m up to 2 m up to 2.3 m up to 2 m from 4 m (with electric lock), 2 m from 5 m (with electric lock), 2 m up to 2 m (without electric lock) (without electric lock) 345,10 359,70 359,70 377,20 353,80 407,00 447, SAFE USE. > Antisquashing protection guaranteed by two adjustable bypass valves. Control panel Reversible/irreversible operator Power supply Absorbed power Thermal protection Rod working stroke Rod speed Opening and closing time Slowdown Impact reaction Type of lock Manual release Operating cycle Environmental conditions Degree of protection Operator weight Dimensions TECHNICAL FEATURES LUX LUX L LUX G LUX B LUX 2B LUX MB LUX R2BSN2 ALCOR N (suggested) reversible 230V~ ± 10%, 50 Hz single-phase 250 W integrated 270 mm 14 mm/s 17 s - hydraulic clutch electric lock reversible very intensive use from -10 C to + 60 IP57 87 N (~8,7 kg) see drawing ALCOR N (suggested) reversible 230V~ ± 10%, 50 Hz single-phase 250 W integrated 270 mm 8,3 mm/s 34 s - hydraulic clutch electric lock reversible very intensive use from -10 C to + 60 IP57 87 N (~8,7 kg) - ALCOR N (suggested) reversible 230V~ ± 10%, 50 Hz single-phase 250 W integrated 390 mm 8,3 mm/s 50 s - hydraulic clutch electric lock reversible intensive use from -10 C to + 60 IP N (~11,2 kg) - ALCOR N (suggested) irreversible 230V~ ± 10%, 50 Hz single-phase 250 W integrated 270 mm 14 mm/s 17 s - hydraulic clutch hydraulic closing release key very intensive use from -10 C to + 60 IP57 87 N (~8,7 kg) - ALCOR N (suggested) irreversible 230V~ ± 10%, 50 Hz single-phase 250 W integrated 270 mm 14 mm/s 17 s - hydraulic clutch hydraulic opening/closing release key very intensive use from -10 C to + 60 IP57 87 N (~8,7 kg) - ALCOR N (suggested) irreversible 230V~ ± 10%, 50 Hz single-phase 250 W integrated 270 mm 10 mm/s 23 s - hydraulic clutch hydraulic closing release key very intensive use from -10 C to + 60 IP57 87 N (~8,7 kg) - ALCOR N (suggested) irreversible 230V~ ± 10%, 50 Hz single-phase 250 W integrated 250 mm 14 mm/s 16 s + slowdown closing hydraulic clutch hydraulic opening/closing release key very intensive use from -10 C to + 60 IP57 87 N (~8,7 kg) -

47 RESIDENTIAL AND APARTMENT-BLOCK USE 47 ACCESSORIES D ALCOR N See page 113 e 168,30 D ME 12 Vac electric lock board for ALCOR N model and ALPHA SD model. e 37,80 D ALCOR SD See page 113 Available while stock last e 109,10 D PLE Anchor plate used to weld brackets to masonry pillars.. e 8,90 D RIGEL 5 See page 113 e 215,30 P EBP 230 Vac electric lock with zero stop resistance. Also available in 50 mm, 75 mm versions and at 24V. e 63,90 D CLS Release key for LUX B, ORO, SUB, PHOBOS N and PHOBOS N BT models (10-piece pack). e 0,80 D IDROLUX WINTER Hydraulic oil for low temperatures, 2 lt can. Always fill up with oil of the same colour. e 25,00 D SPL Preheating board for 1 or 2 LUX, SUB, ORO, P4,5- P7,BERMA and E5 operator models. Can be fitted inside control panels, models AL- PHA SD, ALCOR N. Permits gate opening at regular speed even in particularly cold areas. The operator is able to work at -20 with this accessory. e 40,50 DIMENSIONS D ECB SX Left-hand horizontal electric lock. Also available in right-hand and vertical versions. e 75,00 N IDROLUX R Red hydraulic oil, 2 lt can. Always fill up with oil of the same colour. e 14, D ME BT 24 Vac electric lock board for BT operators. e 17,20 D SSR5 Traffic light and preheating control board for RIGEL 5 control panel. The operator is able to work at -20 with this accessory. e 34,

48 P7 - P4,5 Hydraulic operator for swing gates 48 CODE DESCRIPTION VOLTAGE LEAF WEIGHT LEAF LENGTH PRICE e Q.TY X PALLETS P P P7 P4,5 230 V 230 V up to 5000 N (~500 Kg) up to 5000 N (~500 Kg) up to 7 m up to 4.5 m 604,90 604, A MODEL FOR EVERY NEED. > Two versions available, one for gates with leaves up to 4.5 m and one for leaves up to 7 m. SMART TECHNOLOGY. > Adjustable slowdown when closing. > Customized release key. SAFE USE. > Antisquashing protection guaranteed by two adjustable bypass valves. Control panel Reversible/irreversible operator Power supply Absorbed power Thermal protection Rod working stroke Rod speed Opening time Closing time Slowdown Impact reaction Type of lock Manual release Operating cycle Environmental conditions Degree of protection Operator weight Dimensions TECHNICAL FEATURES P7 P4,5 ALCOR N (suggested) reversible 230V~ ± 10%, 50 Hz single-phase 250 W integrated 390 mm 8,3 mm/s 45 s 42 s + slowdown hydraulic on closing hydraulic clutch electric lock reversible + release knob very intensive use from -10 C to + 60 C IP55 122,5 N (~12,25 kg) see drawing ALCOR N (suggested) reversible 230V~ ± 10%, 50 Hz single-phase 250 W integrated 390 mm 14 mm/s 30 s 28 s + slowdown hydraulic on closing hydraulic clutch electric lock reversible + release knob very intensive use from -10 C to + 60 C IP55 122,5 N (~12,25 kg) see drawing

49 APARTMENT-BLOCK AND INDUSTRIAL USE 49 ACCESSORIES D ALCOR N See page 113 e 168,30 D ME 12 Vac electric lock board for ALCOR N model and ALPHA SD model. e 37,80 D ALCOR SD See page 113 Available while stock last e 109,10 D IDROLUX WINTER Hydraulic oil for low temperatures, 2 lt can. Always fill up with oil of the same colour. e 25,00 D RIGEL 5 See page 113 e 215,30 P EBP 230 Vac electric lock with zero stop resistance. Also available in 50 mm, 75 mm versions and at 24V. e 63,90 D SPL Preheating board for 1 or 2 LUX, SUB, ORO, P4,5-P7,BERMA and E5 operator models. Can be fitted inside control panels, models ALPHA SD, ALCOR N. Permits gate opening at regular speed even in particularly cold areas. The operator is able to work at -20 with this accessory. e 40,50 DIMENSIONS 90 D ECB SX Left-hand horizontal electric lock. Also available in right-hand and vertical versions. e 75,00 D SSR5 Traffic light and preheating control board for RIGEL 5 control panel. The operator is able to work at -20 with this accessory. e 34, D ME BT 24 Vac electric lock board for BT operators. e 17,20 90

50 SUB SERIES Hydraulic operator for swing gates CODE DESCRIPTION VOLTAGE LEAF WEIGHT LEAF LENGTH PRICE e Q.TY X PALLETS 50 P P P P P P P P P P SUB SC right 230 V SUB SC left 230 V SUB R SC right 230 V SUB R SC left 230 V SUB ER SC right 230 V SUB ER SC left 230 V SUB EL SC right 230 V SUB EL SC left 230 V SUB G SC right 230 V SUB G SC left 230 V up to 8000 N (~800 kg) up to 8000 N (~800 kg) up to 8000 N (~800 kg) up to 8000 N (~800 kg) up to 8000 N (~800 kg) up to 8000 N (~800 kg) up to 8000 N (~800 kg) up to 8000 N (~800 kg) up to 8000 N (~800 kg) up to 8000 N (~800 kg) up to 1.80 m up to 1.80 m up to 1.80 m up to 1.80 m up to 2.50 m up to 2.50 m up to 3.50 m up to 3.50 m up to 1.80 m up to 1.80 m 613,50 613,50 652,00 652,00 614,60 614,60 626,90 626,90 655,30 655, A MODEL FOR EVERY NEED. > Several versions available: irreversible with hydraulic locking (for holding when closed and open) and reversible (with use of an electric lock). SAFE USE. > Antisquashing protection guaranteed by two adjustable bypass valves. SIMPLER INSTALLATION. > Maintenance is carried out without any need to raise or disassemble the gate. > The special foundation case makes it possible to remove the operator without taking off the gate leaf. Control panel Reversible/irreversible operator Power supply Absorbed power Thermal protection Opening angle Opening or closing time Slowdown Impact reaction Type of lock Manual release Operating cycle Environmental conditions Degree of protection Operator weight Dimensions TECHNICAL FEATURES SUB SC SUB R SC SUB G SC SUB EL SC SUB ER SC ALCOR N (suggested) irreversibile 230V~ ± 10%, 50 Hz single-phase 250 W integrated s - hydraulic clutch hydraulic opening/closing release key very intensive use from -10 C to + 60 C IP N (~22 kg) see drawing ALCOR N (suggested) irreversibile 230V~ ± 10%, 50 Hz single-phase 250 W integrated s opening/closing hydraulic clutch hydraulic opening/closing release key very intensive use from -10 C to + 60 C IP N (~22 kg) see drawing ALCOR N (suggested) irreversibile 230V~ ± 10%, 50 Hz single-phase 250 W integrated s - hydraulic clutch hydraulic opening/closing release key very intensive use from -10 C to + 60 C IP N (~24 kg) see drawing ALCOR N (suggested) reversibile 230V~ ± 10%, 50 Hz single-phase 250 W integrated s opening/closing hydraulic clutch electric lock reversible very intensive use from -10 C to + 60 C IP N (~22 kg) see drawing ALCOR N (suggested) reversibile 230V~ ± 10%, 50 Hz single-phase 250 W integrated s - hydraulic clutch electric lock reversible very intensive use from -10 C to + 60 C IP N (~22 kg) see drawing

51 RESIDENTIAL AND APARTMENT-BLOCK USE 51 ACCESSORIES D ALCOR N See page 113 e 168,30 D ALCOR SD See page 113 Available while stock last e 109,10 D ECB SX Left-hand horizontal electric lock. Also available in right-hand and vertical versions. e 75,00 D ME 12 Vac electric lock board for ALCOR N model and ALPHA SD model. e 37,80 D RIGEL 5 See page 113 e 215,30 N CPS right Bearing foundation case for SUB operator fitting. Maintenance can be carried out without disassembling the gate. e 148,00 D ME BT 24 Vac electric lock board for BT operators. e 17,20 D PFS Foundation plate for SUB and SUB G. e 14,70 N IDROLUX R Red hydraulic oil, 2 lt can. Always fill up with oil of the same colour. e 14,90 N BSC SUB arm outside hinge. e 26,50 12 DIMENSIONS 30 N CPS left Bearing foundation case for SUB operator fitting. Maintenance can be carried out without disassembling the gate. e 148,00 N CPS G Bearing foundation case for either left hand or right hand SUB G operator fitting. Maintenance can be carried out without disassembling the gate. e 210,60 P EBP 230 Vac electric lock with zero stop resistance. Also available in 50 mm, 75 mm versions and at 24V. e 63,90 D CLS Release key for LUX B, ORO, SUB, PHOBOS N and PHOBOS N BT models (10-piece pack). e 0,80 D CLS/82 Release key for SUB model (10-piece pack). e 1,00 D IDROLUX WINTER Hydraulic oil for low temperatures, 2 lt can. Always fill up with oil of the same colour. e 25,00 D SPL Preheating board for 1 or 2 LUX, SUB, ORO, P4,5-P7,BERMA and E5 operator models. Can be fitted inside control panels, models ALPHA SD, ALCOR N. Permits gate opening at regular speed even in particularly cold areas. The operator is able to work at -20 with this accessory. e 40,50 D SSR5 Traffic light and preheating control board for RIGEL 5 control panel. The operator is able to work at -20 with this accessory. e 34, CPS=394 CPSG= CPS=400 CPSG= Ø30

52 524 Fast Net is a local network that makes it possible to connect one or more peripheral devices (slaves) powered by the connection line to any control unit (master). The network uses a non-polarized pair on which the power for the proper operation of the node is transferred to the local node itself. Furthermore, a bidirectional communication signal passes on the network and the various connected devices exchange information with the control panel.

53 FASTNET DEIMOS BT NET KIT PHOBOS BT NET KIT

54 DEIMOS BT NET KIT - PHOBOS BT NET KIT FAST NET 54 solid state blinker with integrated antenna receiver with possibility of installation in the blinker or in the control unit synchronized photocells for the possibility of installing several pairs close to each other. preprogrammed kits with no need for configuration for connecting the accessories contained in the kit. the first additional accessory for every category of accessories, is already configured and therefore connectable directly to the bus without any address configuration. Technical specifications: number of devices connectable: up to 2 receivers up to 4 blinkers up to 4 control buttons per type (4 start, 4 pedestrian) up to 4 key selector switches SMART TECHNOLOGY. > The unpolarized wire pair prevents connection order errors during installation. > Open system: automatic recognition of the accessories installed and possibility of adding more accessories later. > Exclusive BFT proprietary communications protocol protected by international patent. SAFE USE. > The devices monitored by the bus protocol are continually checked over time. > The photocells are synchronized. SIMPLER INSTALLATION. > All the peripheral devices are connected to the control unit by just two wires. > All the devices contained in the same kit are configured in such a way as to allow immediate installation. > The components can be connected freely: in series, parallel, etc. WITH WITHOUT

55 55 DEIMOS BT NET KIT (R ) : PHOBOS BT NET KIT (R ): DEIMOS BT NET Operator DEIMOS BT with incorporated control board NETTUNO S SC NET Key switch SC NET. PHOBOS BT NET Operator Phobos BT Net MITTO 2 12 V Two-channel transmitter, 12 V, with rolling code. FL NET Pair of photocells FL Net. MITTO 2 12 V Two-channel transmitter, 12 V, with rolling code. E 514,90 LAMP NET Lamp Net blinker with extractable self-learning FAST-NET receiver for Mitto series rolling code transmitters. FL NET Pair of photocells FL Net. SC NET Key switch SC NET. LAMP NET Lamp Net blinker with extractable self-learning FAST-NET receiver for Mitto series rolling code transmitters. E 697,90 NETTUNO B Control panel for one or 2 24V motors of the Phobos BT Net series. Easy wiring thanks to the BUS system. Only 2 wires to connect up to 16 peripherals. Safety thanks to the electronic antisquashing control with amperometric detection and continuous dialogue with peripherals. Complete with two-channel receiver incorporated or positioned on the blinker, with optional back-up batteries and electric lock. Total control of programming by digital display and three simple buttons. Easy setting by means of the AUTOSET function for automatic setting of the functional parameter and auto-recognition of the accessories connected. Accessories: Accessories: P SB BAT Thanks to the back-up batteries and battery charger, the SB BAT kit guarantees low voltage operation in the event of power failure. For DEIMOS BT model. E 81,30 P BT BAT Thanks to the back-up batteries and battery charger, the BT BAT kit guarantees low voltage operation of the leaf in the event of power failure. For PHOBOS BT, PHOBOS BT L, IGEA LB BT and IGEA BT models. E 92,30

56 56 From small shutters to French windows, BFT offers models made to measure for every need. Everything is oriented towards the creation of a customized system: strong, powerful and reliable motors; a wide range of accessories; simplified assembly, installation and adjustment.

57 Solutions for the automation of roller shutters serie LOOP loop

58 LOOP SERIES Roller shutter automation 58 CODE DESCRIPTION VOLTAGE OPERATOR DIAMETER ROLLER SHUTTER WEIGHT PRICE e Q.TY X PALLETS P P P P P LOOP 50/10 LOOP 50/15 LOOP 50/35 LOOP 50/50 LOOP 50/50M 230 V 230 V 230 V 230 V 230 V 60 / 70 mm 60 / 70 mm 60 / 70 mm 60 / 70 mm 60 / 70 mm 18 kg 35 kg 55 kg 88 kg 88 kg 100,30 106,70 127,00 145,30 223, A MODEL FOR EVERY NEED. > Several versions available for shutters of any material (aluminium, steel, PVC, wood) and size (max. weight 88 kg with Loop 50/50, Loop 50/50M and octagonal tube with diameter 60). SMART TECHNOLOGY. > Fast adjustment of the limit switches. SAFE USE. > Compact and robust self-braking gearmotor. Control panel Reversible/irreversible operator Power supply Absorbed power Thermal protection Absorbed power Max torque Shaft output rpm Limit switch rpm Type of limit switches Weight up with roller diam, 60/70 Manual release Environmental conditions Degree of protection Operator weight Dimensions TECHNICAL FEATURES LOOP 50/10 LOOP 50/15 LOOP 50/35 LOOP 50/50 LOOP 50/50M CAPRI (suggested) irreversible 230V~ ± 10%, 50 Hz single-phase 130 W integrated 0,5 A 10 Nm 16 min-1 28 mechanical 18 kg - from -10 C to + 40 C IP44 21 N (~2,1 kg) see drawing CAPRI (suggested) irreversible 230V~ ± 10%, 50 Hz single-phase 130 W integrated 0,5 A 20 Nm 16 min-1 28 mechanical 35 kg - from -10 C to + 40 C IP44 22 N (~2,2 kg) see drawing CAPRI (suggested) irreversible 230V~ ± 10%, 50 Hz single-phase 240 W integrated 1 A 30 Nm 16 min-1 28 mechanical 55 kg/50 kg - from -10 C to + 40 C IP44 27,5 N (~2,75 kg) see drawing CAPRI (suggested) irreversible 230V~ ± 10%, 50 Hz single-phase 270 W integrated 1,1 A 50 Nm 12 min-1 28 mechanical 88 kg/85 kg - from -10 C to + 40 C IP44 28 N (~2,8 kg) see drawing CAPRI (suggested) irreversible 230V~ ± 10%, 50 Hz single-phase 270 W integrated 1,1 A 50 Nm 12 min-1 28 mechanical 88 kg/85 kg release with rod from -10 C to + 40 C IP44 33 N (~3,3 kg) see drawing

59 5 RESIDENTIAL AND APARTMENT-BLOCK USE 59 ACCESSORIES D CAPRI See page 113 e 64,60 P RUL 60/3 Octagonal shutter winding roller ø 60 x 3 m. e 18,50 P KIT TL 60 Basic hardware kit for installing one LOOP operator, comprising: -no. 1 wall bracket -no. 1 adapter for octagonal roller, size 60 -no. 2 hooks for fixing the belt to the winding roller. e 9,30 P KIT TL 60 M Basic hardware kit for installing one LOOP operator with manual release comprising: -no. 1 wall bracket for manual release -no. 1 adapter for octagonal roller, size 60 -no. 2 hooks for fixing the belt to the winding roller. e 11,10 P BLOCCANTI mm anti-break-in block. Available for standard, mini and wooden slats. 1 block every 1.10 m of roller shutter. e 15,00 P RUL 60/6 Octagonal shutter winding roller ø 60 x 6 m. e 34,70 P CAL 60/100 Adjustable telescopic octagonal cover for ø 60 roller. e 7,90 P CAL 60/30 Octagonal shaped cover for ø 60 roller. e 7,10 P SM505 Support 50 to be flush mounted. e 2,10 N SM5013 Revolving wall adapter for manual release. e 16,70 5, ,5 DIMENSIONS P1 F G Ø 44,5 P Y X 28 P BLOCCANTI mm anti-break-in block. Available for standard, mini and wooden slats. 1 block every 1.10 m of roller shutter. e 15,00 P GANC Hook for fixing the belt to the winding roller. e 0,50 N SM5014 Bracket with 10 mm shaft for direct coupling to motor and square-section snap-on shaft for mounting. e 5, LOOP 0/0 M F G Ø 44,5 P P RUL 60/1,5 Octagonal shutter winding roller ø 60 x 1.5 m. e 11,40 P SM504 Wall-mounted 50 support with bearing. e 1,30 N SM5015 Dual-position revolving bracket with rounded shaft, with two positions and associated saddle for manual release. e 19, For other loop accessories see pace 118

60 60 For those who use counterweight, spring and sectional overhead doors, BFT proposes a complete range of operators, with solutions made to measure for garage doors of any weight or size. Every model combines aesthetic and functional value, privileging ease of installation and simple maintenance.

61 Solutions for the automation of garage doors Phebe PHEBE botticelli BOTTICELLI eos 120 berma EOS

62 COUNTERWEIGHT and SPRING-OPERATED OVERHEAD DOORS 62 Legend Suggested automation Possible option spring-operated overhead doors up to 60 Kg up to 120 Kg residential apartment-block and industrial residential apartment-block and industrial botticelli eos tir 120 EOS 120 phebe berma berma+berma sq phebe+phebe SQ up to 7 m 2 residential apartment-block and industrial counterweight overhead doors up to 10 m 2 residential apartment-block and industrial over 10 m 2 residential apartment-block and industrial

63 SELECTION GUIDE 63

64 PHEBE Electromechanical operator for counterweight overhead doors 64 CODE DESCRIPTION VOLTAGE DOOR SURFACE PRICE e Q.TY X PALLETS P P R PHEBE PHEBE SQ PHEBE KIT 24 V 24 V 24 V 7 m2 (1 operator) (2 operators), 10 m2 7 m2 (1 operator) (2 operators), 10 m2 7 m2 (1 operator) (2 operators), 10 m2 430,00 248,50 548, SMART TECHNOLOGY. > Management of slowdown, adjustable for opening and closing > Control unit compatible with the EElink protocol. SAFE USE. > Specially designed for simpler and faster installation in compliance with the safety standards laid down by the Machinery Directive. > Thanks to the antisquashing system, the operator inverts motion and prevents damage to people and property in the event of contact (BT). Control panel Reversible/irreversible operator Power supply Absorbed power Thermal protection Opening or closing time Impact reaction Limit switches Manual release Operating cycle Environmental conditions Degree of protection Operator weight Dimensions TECHNICAL FEATURES PHEBE HYDRA R (incorporated) irreversible 230V~ ± 10%, 50 Hz single-phase 170 W integrated in the control unit from 17 to 20 s electronic torque limiter integrated in the controlpanel electric, incorporated and adjustable knob release semi intensive use from -15 C to + 60 C IP20 (IPX4 on request) 100 N (~10 kg) see drawing

65 RESIDENTIAL USE 65 ACCESSORIES D HYDRA R QSG2 See page 113 e 185,00 D BCP Short base to be welded for PHEBE operator. e 8,40 N CBA Set of telescopic arms for 1 overhead door, including side drive elements. e 44,60 N BLP Long base to be welded for PHEBE operator. e 17,20 N CBAC Set of curved telescopic arms, including side drive elements for 1 overhead door. e 69,70 N CTA No. 2 square 20x mm long drive tubes. Suitable for 1-operator motor drive. e 16,60 DIMENSIONS N CTA2 No. 2 square 20x mm long drive tubes. Suitable for 2-operator motor drive. e 4, N CTBP Set of drive tubes and fixing bases to complete the PHEBE KIT. e 37,90 P SM1 External manual release with single cable control to be fitted to the cremone bolt. Obligatory if there are no secondary access doors to the premises. e 16,10 P SM2 External manual release with double cable control to be fitted to the cremone bolt. Compulsory if there are no secondary access doors to the place. e 19,40 P BT BAT Thanks to the back-up batteries and battery charger, the BT BAT kit guarantees low voltage operation of the leaf in the event of power failure. For PHOBOS BT, PHOBOS BT L, IGEA LB BT and IGEA BT models. e 92,30 P BT BAT1 Thanks to the back-up batteries and battery charger, the BT BAT1 kit guarantees low voltage operation in the event of power failure. e 81,

66 BOTTICELLI Electromechanical operator for spring-operated overhead doors 66 CODE DESCRIPTION VOLTAGE DOOR SURFACE PRICE e Q.TY X PALLETS P P P P BOTTICELLI EOS * EOS C * EOS BASE * 24 V 24 V 24 V 24 V up to 60 kg up to 60 kg up to 60 kg up to 60 kg 285,60 413,90 422,90 316, * Available while stock last SMART TECHNOLOGY. > Control unit with self-learning functions. > Encoder-type limit switch without references in the chain or in the belt. > Control unit compatible with the EElink protocol. SAFE USE. > Specially designed for simpler and faster installation in compliance with the safety standards laid down by the Machinery Directive. > Thanks to the antisquashing system, the operator inverts motion and prevents damage to people and property in the event of contact (BT). > The limit switch with integrated encoder allows the maximum stopping precision. No mechanical component of the limit switch system is subject to wear and maintenance. > The strength of the track provides greater resistance to stress during assembly and in operation. SIMPLER INSTALLATION. > The track can be fixed directly to the ceiling without using brackets. The cables are housed inside two grooves formed in the track itself. > Working stroke recovery possibility by rotating the motor head 90. Control panel Reversible/irreversible operator Power supply Absorbed power Force Opening or closing time Impact reaction Type of limit switches Manual release Operating cycle Environmental conditions Degree of protection Operator weight Dimensions BOTTICELLI TECHNICAL FEATURES VENERE (incorporated) irreversible 230V~ ± 10%, 50 Hz single-phase 180 W 600 N 28 s electronic torque limiter integrated in the controlpanel electronic with encoder unlocking with rope very intensive use from -15 C to + 60 C IPX0 50 N (~5 kg) see drawing EOS SCE MA (incorporated) irreversible 230V~ ± 10%, 50 Hz single-phase 130 W 600 N 31 s electronic torque limiter integrated in the control panel electronic with encoder unlocking with rope very intensive use from -15 C to + 60 C IPX0 80 N (~8 kg) see drawing

67 RESIDENTIAL USE 67 ACCESSORIES P BIN CATENA 2900 Chain track for Botticelli, length 2900, working stroke 2400 mm. e 72,90 P BIN CINGHIA 2x1450 Belt track divided into two halves for Botticelli, length 2900, working stroke 2400 mm e 121,20 P BIN CATENA 3500 Chain track for Botticelli, length 3500, working stroke 3000 mm. e 79,50 P BIN CINGHIA 2x1750 Belt track divided into two halves for Botticelli, length 3500, working stroke 3000 mm e 130,80 P BIN CINGHIA 2900 Belt track for Botticelli, length 2900, working stroke 2400 mm. e 109,20 P EOS BIN Track supplied complete with chain drive for EOS BASE. Available while stock last. e 74,40 P CB EOS Thanks to the back-up batteries and battery charger, the CB EOS kit guarantees low voltage operation in the event of power failure. e 83,80 D PR2 Wall radio control with rolling code. e 34,40 P BIN CINGHIA 3500 Belt track for Botticelli, length 3500, working stroke 3000 mm e 118,80 P BRCT Adapter arm used to install Botticelli, TIR and EOS to counterweight overhead doors. e 60,90 34,5 DIMENSIONS 146,5 P BIN CATENA 2x1450 Chain track divided into two halves for Botticelli, length 2900, working stroke 2400 mm e 88,00 N PRE1 Complete kit for extending working stroke by 1 m, up to 3.5 m, for EOS only. e 22,70 P SM1 External manual release with single cable control to be fitted to the cremone bolt. Obligatory if there are no secondary access doors to the premises. e 16,10 N APT Complete kit for assembly 25 cm from ceiling or directly on the ceiling (EOS, TIR). e 16, / / 3753 P BIN CATENA 2x1750 Chain track divided into two halves for Botticelli, length 3500, working stroke 3000 mm e 92,60 N SET/S External release for insulated sectional and overhead doors up to 50 mm thick. e 31,80 P ST Automatic bolt release for spring-operated overhead doors. e 32, max

68 EOS Electromechanical operator for spring-operated overhead doors 68 CODE DESCRIPTION VOLTAGE TRACTIVE FORCE PRICE e Q.TY X PALLETS P P EOS 120 TIR 120 LF* 24 V 24 V up to 120 kg up to 120 kg 380,00 456, * Available while stock last SMART TECHNOLOGY. > Control unit with self-learning and self-diagnostic functions (EOS 120). > Encoder-type limit switch without references in the chain. > Control unit compatible with the EElink protocol (EOS 120). SAFE USE. > Specially designed for simpler and faster installation in compliance with the safety standards laid down by the Machinery Directive. > Thanks to the antisquashing system, the operator inverts motion and prevents damage to people and property in the event of contact (BT). > The strength of the track provides greater resistance to stress during assembly and in operation. SIMPLER INSTALLATION. > The track can be fixed directly to the ceiling without using brackets. The cables are housed inside two grooves formed in the track itself. > Woking stroke recovery possibility by rotating the motor head 90. Control panel Reversible/irreversible operator Power supply Absorbed power Force Opening or closing time Impact reaction Type of limit switches Manual release Operating cycle Environmental conditions Degree of protection Operator weight Dimensions EOS 120 TECHNICAL FEATURES VENERE D (incorporated) irreversible 230V~ ± 10%, 50 Hz single-phase 240 W 1200 N 28 s electronic torque limiter integrated in the control panel electronic with encoder unlocking with rope intensive use from -15 C to + 60 C IPX0 80 N (~8 kg) see drawing TIR 120 LF STIR LF1 (incorporated) irreversible 230V~ ± 10%, 50 Hz single-phase 240 W 1200 N 28 s electronic torque limiter integrated in the control panel microswitch unlocking with rope intensive use from -15 C to + 60 C IPX0 80 N (~8 kg) see drawing

69 RESIDENTIAL AND APARTMENT-BLOCK USE 69 ACCESSORIES P BIN 120 CATENA 2900 Chain track for EOS 120, length 2900, working stroke 2400 mm. e 92,00 P BIN 120 CATENA 3500 Chain track for EOS 120, length 3500, working stroke 3000 mm. e 99,00 P SM1 External manual release with single cable control to be fitted to the cremone bolt. Obligatory if there are no secondary access doors to the premises. e 16,10 N APT Complete kit for assembly 25 cm from ceiling or directly on the ceiling (EOS 120, TIR). e 16,10 P BIN 120 CATENA 2x1450 Chain track for EOS 120, length 2x1450, working stroke 2400 mm. e 101,00 P ST Automatic bolt release for spring-operated overhead doors. e 32,30 D PR2 Wall radio control with rolling code. e 34,40 P BIN 120 CATENA 2x1750 Chain track for EOS 120, length 2x1750, working stroke 3000 mm. e 109,00 N SET/S External release for insulated sectional and overhead doors up to 50 mm thick. e 31,80 40 DIMENSIONS 146 P CB EOS Thanks to the back-up batteries and battery charger, the CB EOS kit guarantees low voltage operation in the event of power failure. e 83,80 P BRCT Adapter arm used to install Botticelli, TIR and EOS to counterweight overhead doors. e 60, N PT1 Complete kit for extending working stroke by 1 m, up to 3.5 m, for TIR only. e 24,10 N PRE1 Complete kit for extending working stroke by 1 m, up to 3.5 m, for EOS only. e 22, max

70 BERMA SERIES Hydraulic operator for counterweight overhead doors 70 CODE DESCRIPTION VOLTAGE DOOR SURFACE PRICE e Q.TY X PALLETS P BERMA R P BERMA SEB R P BERMA SA R 230 V 230 V 230 V 9 m2 9 m2 9 m2 587,60 592,30 613, A MODEL FOR EVERY NEED. > Several versions available, with slowdown, with slowdown and external release and with slowdown and automatic release, for automating doors including large ones. SMART TECHNOLOGY. > Hydraulic locking on closing and internal release (also external in SEB versions). > Incorporated slowdown device (in the Berma R, Berma SEB R and Berma SA R models). SAFE USE. > Hydraulic antisquashing system. Control panel Reversible/irreversible operator Power supply Absorbed power Thermal protection Opening or closing time Impact reaction Type of limit switches Manual release Operating cycle Environmental conditions Degree of protection Operator weight Dimensions TECHNICAL FEATURES BERMA RIGEL 5 (suggested) irreversible 230V~ ± 10%, 50 Hz single-phase 250 W 160 C 25 s electronic torque limiter integrated in the control panel - electric, incorporated and adjustable very intensive use from -10 C to + 60 C IP N (~10 kg) see drawing

71 RESIDENTIAL USE 71 ACCESSORIES D ALPHA SD See page 113 e 162,10 P SEI Hydraulic lock for BERMA SA and BERMA SA R models. Including connection pipe. e 118,80 N CA1 Set of accessories for installation of 1 operator. Max length 4 m. Comprising telescopic arms, longitudinal members, tubes for overhead doors. e 111,20 N CA1C Set of accessories for installation of 1 operator. Max length 4 m. Comprising curved telescopic arms, longitudinal members. e 150,40 N CA2 Set of accessories for installation of two operators. Length over 4 m. Comprising telescopic arms, longitudinal members. e 166,50 D SPL Preheating board for 1 or 2 LUX, SUB, ORO, P4,5-P7,BERMA and E5 operator models. Can be fitted inside control panels, models ALPHA SD, ALCOR N. Permits gate opening at regular speed even in particularly cold areas. The operator is able to work at -20 with this accessory. e 40,50 D SSR5 Traffic light and preheating control board for RIGEL 5 control panel. The operator is able to work at -20 with this accessory. e 34,80 DIMENSIONS N CA2C Set of accessories for installation of two operators. Length over 4 m. Comprising curved telescopic arms, longitudinal members, tubes for overhead doors. e 144,00 N SEB External key release for BERMA, FORB and IGEA LB BT models. e 17,70

72 72 Shops, bars and restaurants, shopping centres and other buildings: BFT presents its operators for roller shutters, subjected to testing for their entire life cycle to guarantee perfect operation in every situation.

73 Solutions for the automation of roll-up doors X x 130

74 X130 SERIES Electromechanical operator for balanced roll-up doors 74 CODE DESCRIPTION VOLTAGE ROLL UP DOOR ROLL UP DOOR WEIGHT PRICE e Q.TY X PALLETS P P P P X130 X130 EF X130 P X130 PEF 230 V 230 V 230 V 230 V 16 m2 16 m2 16 m2 16 m2 up to 2000N (~200 kg) up to 1800N (~180 kg) up to 2200N (~220 kg) up to 2000N (~200 kg) 180,80 222,90 180,80 222, A MODEL FOR EVERY NEED. > Several versions available, also with electric brake. SMART TECHNOLOGY. > Memorization of the position reached to simplify limit switch adjustment. Control panel Reversible/irreversible operator Power supply Absorbed power Thermal protection Opening or closing time Output torque Pulley diameter Shaft diameter Torque for reversibility (brake not fitted or released) Type of lock Type of limit switches Manual release Environmental conditions Degree of protection Operator weight Dimensions TECHNICAL FEATURES X130 X130 EF X130 P X130 PEF CAPRI TCA (suggested) reversible 230V~ ± 10%, 50 Hz single-phase 400 W integrated Nm 220 mm 60 mm (42 e 48 mm with the optional CS adapters) 4 Nm - electric, incorporated, adjustable - from -10 C to + 50 C IP20 60 N (~6 kg) see drawing CAPRI TCA (suggested) irreversible 230V~ ± 10%, 50 Hz single-phase 400 W integrated Nm 220 mm 60 mm (42 e 48 mm with the optional CS adapters) 4 Nm electric brake electric, incorporated, adjustable flush from -10 C to + 50 C IP20 60 N (~6 kg) see drawing CAPRI TCA (suggested) reversible 230V~ ± 10%, 50 Hz single-phase 420 W integrated Nm 200 mm 60 mm (42 e 48 mm with the optional CS adapters) 4 Nm - electric, incorporated, adjustable - from -10 C to + 50 C IP20 60 N (~6 kg) see drawing CAPRI TCA (suggested) irreversible 230V~ ± 10%, 50 Hz single-phase 420 W integrated Nm 200 mm 60 mm (42 e 48 mm with the optional CS adapters) 4 Nm electric brake electric, incorporated, adjustable flush from -10 C to + 50 C IP20 60 N (~6 kg) see drawing

75 RESIDENTIAL AND COMMERCIAL USE 75 ACCESSORIES D CAPRI See page 113 e 64,60 N EF X Complete electric brake for X130 - X130 P. e 41,60 D CAPRI TCA See page 113 e 87,70 D CS 48 Pair of reduction half bearings for 48 mm diameter shafts. e 5,30 N SIBOX Empty safe for external release and control push-button panel. Dimensions: 179.5x122x92 mm. e 40,50 N MOX External release mechanism for SIBOX model. e 5,30 D CS 42 Pair of reduction half bearings for 42 mm diameter shafts. e 5,30 55 DIMENSIONS /220 N POX-UP Push-button panel with two buttons and pilot light for direct connection without control panel. To be inserted into the SIBOX model safe. e 7,20 N POX-SC Push-button panel with two buttons and pilot light for direct connection when the operator is regulated by an electrical control panel. e 7, /220

76 76 Shops, offices, banks and shopping centres: there are lots of possibilities for installing our versatile and functional automatic doors. With accessories and security devices, BFT offers a broad range of profiles and seals to provide a wide range of opportunities for customizing the installation.

77 Solutions for the automation of sliding doors LINEA linea

78 LINEA Electromechanical operator for pedestrian doors 78 A MODEL FOR EVERY NEED. > Several versions available: for single leaf with 150 kg max. weight or for two leaves with max. weight kg. > Possibility of installing glass leaves. > A wide range of accessories. SIMPLER INSTALLATION. >Incorporated control unit. >The door can be configured in different ways by means of the practical PFD pushbutton panel. >Guard raisable for maintenance. >Configurable using the Proxima programmer thanks to compatibility with the EElink protocol. Control panel Reversible/irreversible operator Power supply Accessories powered by Useful passage Capacity Absorbed power Opening speed Closing speed Approach speed Automatic closing time Environmental conditions Working cycle Stop control Antisquashing Back-up batteries (*) Available for all voltage ratings Technical specifications LINEA 1 LINEA 2 AD LINEA (incorporated) irreversible 230V~ ± 10%, 50 Hz single-phase (*) 24 Vac-dc 0,4 A max min 750 mm - max 2550 mm 150 kg 1 A adjustable up to 90 cm/s adjustable up to 35 cm/s up to 10 cm/s from 1 to 60 s from 0 to 50 C (inside guard) continuous to 25 adjustable antisquash safety device with obstacles (optional) 2x12V 1,2 A/h AD LINEA (incorporata) irreversible 230V~ ± 10%, 50 Hz single-phase (*) 24 Vac-dc 0,4 A max min 800 mm - max 2900 mm kg 1 A adjustable up to 180 cm/s adjustable up to 70 cm/s up to 20 cm/s from 1 to 60 s from 0 to 50 C (inside guard) continuous to 25 adjustable antisquash safety device with obstacles (optional) 2x12V 1,2 A/h Dimensions

79 COMMERCIAL USE 79 CODE DESCRIPTION VOLTAGE B mm A mm L mm Top rail price E Anodized guard* PRICE E LINEA 1 P P P P P P P P P P P P P P P LINEA 107 LINEA 108 LINEA 109 LINEA 110 LINEA 111 LINEA 112 LINEA 113 LINEA 114 LINEA 115 LINEA 116 LINEA 117 LINEA 119 LINEA 121 LINEA 123 LINEA V 24 V 24 V 24 V 24 V 24 V 24 V 24 V 24 V 24 V 24 V 24 V 24 V 24 V 24 V , , , , , , , , , , , , , , ,20 P P P P P P P P P P P P P P P ,00 62,60 67,70 72,90 77,50 83,20 88,30 93,00 98,20 102,80 108,00 118,30 128,10 138,40 148,70 1 LEAF (right) 2 LEAF (Left) LINEA 2 P P P P P P P P P P P P P P P P LINEA 208 LINEA 209 LINEA 210 LINEA 211 LINEA 212 LINEA 213 LINEA 214 LINEA 215 LINEA 216 LINEA 217 LINEA 219 LINEA 221 LINEA 223 LINEA 225 LINEA 227 LINEA V 24 V 24 V 24 V 24 V 24 V 24 V 24 V 24 V 24 V 24 V 24 V 24 V 24 V 24 V 24 V X500 2X500 2X550 2X600 2X650 2X700 2X750 2X800 2X850 2X900 2X1000 2X1100 2X1200 2X1300 2X1400 2X , , , , , , , , , , , , , ,20 P P P P P P P P P P P P P P ,60 67,70 72,90 77,50 83,20 88,30 93,00 98,20 102,80 108,00 118,30 128,10 138,40 148, ,60 P , ,00 P ,30 case length (L) * For Natural Aluminium Guards, give the Anodised Guard codes with instead of 00002; the cost is reduced by E 5,20 compared to anodised versions. clear opening size (B) leaf P length (A) fixed part (PF) A+50

80 LINEA Electromechanical operator for pedestrian doors 80 PPA Aluminium clamp for tempered glass doors with no frame Model mm Code Price E Mod P ,70 12 P ,70 Mod P ,80 12 P ,80 Mod P ,90 12 P ,90 Mod P ,00 12 P ,00 Mod P ,70 12 P ,70 Mod P ,10 12 P ,10 Mod P ,20 12 P ,20 Mod P ,90 12 P ,90 Mod P ,00 12 P ,00 Mod P ,10 12 P ,10 Mod P ,50 12 P ,50 Mod P ,70 12 P ,70 Mod P ,60 12 P ,60 Mod P ,00 12 P ,00 Mod P ,80 12 P ,80 Mod P ,90 12 P ,90 Model mm Code Price E Mod P ,90 12 P ,90 Mod P ,00 12 P ,00 Mod P ,70 12 P ,70 Mod P ,10 12 P ,10 Mod P ,20 12 P ,20 Mod P ,30 12 P ,30 Mod P ,80 12 P ,80 Mod P ,10 12 P ,10 Mod P ,50 12 P ,50 Mod P ,70 12 P ,70 Mod P ,60 12 P ,60 Mod P ,10 12 P ,10 Mod P ,80 12 P ,80 Mod P ,40 12 P ,40 Mod P ,10 12 P ,10

81 81 ACCESSORIES D PFD Digital pushbutton panel for LINEA, for: - selecting the desired function using an appropriate key for the door, possible by entering a user code - modifying the operating parameters and the operating logic of the door after entering an installer code - set personal user and installer codes. E 76,10 P NTS Door operator support beam in anodised aluminium for LINEA. E 67,20 P RIP * Broad/narrow band active multifunctional infrared radar. E 181,90 P FPA 1 1 pair of photocells with a pair of sensors. E 91,80 P DAB-1 Battery-powered antipanic device, which can be installed to doors. E 78,80 P SASAM 1 Antipanic break-open system in natural aluminium for a mobile leaf. Max L 1100 mm. E 284,90 P SASAM 1 Antipanic break-open system in natural aluminium for a mobile leaf. Max L 1100 mm. E 291,30 P SASAM 2 Antipanic break-open system in natural aluminium for two mobile leaves. Max L 1100 mm. E 528,50 P SASAM 2 SASAM 2 version in anodised aluminium. E 534,20 P PGI Bottom door guide profile for aluminium frame. E 7,60 P PPR (**) Runner for bottom guide for aluminium frame. If a door has one leaf, use one runner, if the two door has two leaves, use to runners.. E 11,10 * If access is required both for entrance and exit, order no. 2 RIP radars. ** For one-leaf doors use 1 runner, for two-leaf doors use 2 runners. P FPA 2 1 pair of photocells with two pairs of sensors. E 124,50 N NCE Electromagnetic latch for LINEA. E 121,70

82 LINEA KIT Electromechanical operator for pedestrian doors 82 Components contained in the LINEA 1 and LINEA 2 kits Hardware necessary for completing the installation Rubber doorstop Gearmotor Power supply fixture bracket Control panel with AD LINEA electronic board Toothed drive belt Rubber doorstop Sidesunit Encoder for the management of stroke parameters Movement carriage with anti-derailment device Power supply unit Gearmotor fixture bracket PA Anodised profile Anodised guard Sliding door mounting profile

83 83 LNEA KIT CODE DESCRIPtion PRICE E P P To complete installation of the automatic sliding door, the following accessories must be used: D D D D Automatic sliding door kit Automatic sliding door kit PA CARTER Complete kit for the installation of a LINEA 2 230V single-leaf sliding door Complete kit for the installation of a LINEA 2 230V double-leaf sliding door Toothed drive belt Sliding door mounting profile Anodised PA profile Anodised guard E 884,40 E 1.019,60 E 19,40 E 15,70 E 52,10 E 19,80

84 LINEA Door profile and seals for framed doors (20 mm series) 84 Assembly of fixed door system 1 D D D D D D D D A N *D D *D D *N *N *N A A Assembly and installation of sliding door system 1 D D D D B P *N *N *N B B 1 B 2 B B 3 A 2 A B B Assembly of double fixed door system 1 D D D D D D D D D D D D A N *D D *D D *N *N *N A 3 A A NOTES Channel sections are supplied in 5m lengths and weatherstripping in 30m rolls. The quantity of each item thus varies according to door size. * Product codes marked with an asterisk are not shown in technical drawings. For more details please refer to chart A

85 85 Door profile and seals for framed doors (20 mm series) D Natural top profile for bottom mobile leaf, fixed and mobile leaf. E 69,30 * D Anodised top profile for bottom mobile leaf fixed and mobile leaf. E 85,40 * D Natural edge profile / photocell holder. E 30,30 * D Anodised edge profile / photocell holder. E 38,80 * N Side sealing brush pack. (30 metres) E 23,10 N Accessory pack for constructing 1 fixed leaf. See drawing (A) E 14,60 65 D Natural top profile for fixed leaf. E 55,70 * D Anodised top profile for fixed leaf. E 70,50 * D Natural latch profile. E 7,10 * D Anodised latch profile. E 12,80 * 13 5 N Glass stopper seal pack. (30 metres) E 21,40 P Accessory pack for assembling 1 mobile leaf. See drawing (B) E 35, D Natural jamb profile. E 20,10 * D Anodised jamb profile. E 29,20 * D Natural weather strip profile. E 12,50 * D Anodised weather strip profile. E 17,70 * N Leaf latch seal pack. (30 metres) E 57,80 * Available in 5 m bars The 20 mm contours are not suitable with the SASAM antipanic system. The 20 mm contours are available also painted uron request D Natural frame profile. E 22,80* D Anodised frame profile. E 30,10 * N Mobile leaf sealing brush pack. (30 metres) E 86,70

86 86 All the doors in sheds and industrial structures can be automated using a BFT operator. Extremely strong and compact, these solutions are also suitable for the most difficult applications: whatever the space they are installed in, they drive doors of different sizes in a safe and regular manner.

87 Solutions for the automation of industrial folding doors FORB forb IGEA igea LB lb BT bt

88 FORB SERIES - IGEA LB BT Electromechanical operator for industrial sectional doors 88 CODE DESCRIPTION VOLTAGE DOOR WEIGHT PRICE e Q.TY X PALLETS P P IGEA LB BT FORB R 24 V 230 V from 2000 N (~200kg) to 2500 N (~250kg) 720 N = 2,4 m2 (2 operators) 368,70 659, FORB SERIES A MODEL FOR EVERY NEED. > Several versions available for automating large doors. SAFE USE. > Hydraulic antisquashing system. > Hydraulic locking on closing and internal release (also external with optional SEB accessory). > Incorporated slowdown device (only on FORB R and FORB ER). IGEA LB BT SMART TECHNOLOGY. > The slowdown is adjusted easily thanks to the low number of wires to connect. > Control unit compatible with the EElink protocol. SAFE USE. > Specially designed for simpler and faster installation in compliance with the safety standards laid down by the Machinery Directive. > Thanks to the antisquashing system, the operator inverts motion and prevents damage to people and property in the event of contact (BT). SIMPLER INSTALLATION. > BFT s system of coded limit switches makes it possible to reduce the complexity of wiring the low-voltage motors: a single wire is carried to the control panel instead of the three normally required, thereby increasing the simplicity and speed of installation. Furthermore, the system is able to automatically distinguish between the open limit switch and the closed one and hence prevent wasted time and wiring errors. Control panel Reversible/irreversible operator Power supply Absorbed power Thermal protection Opening or closing time Output revolutions Reduction ratio Max torque Impact reaction Type of limit switches Manual release Operating cycle Environmental conditions Degree of protection Operator weight Dimensions TECHNICAL FEATURES FORB FORB R FORB ERSA IGEA LB BT RIGEL 5 (suggested) irreversible 230V~ ± 10%, 50 Hz single-phase 250 W integrated 25 s 1,2 min Nm hydraulic friction - lever very intensive use from -15 C to + 60 C IP N (~10 kg) see drawing RIGEL 5 (suggested) irreversible 230V~ ± 10%, 50 Hz single-phase 250 W integrated 13 s + slow down 2,4 min Nm hydraulic friction - lever very intensive use from -15 C to + 60 C IP N (~10 kg) see drawing RIGEL 5 (suggested) reversible 230V~ ± 10%, 50 Hz single-phase 250 W integrated 13 s + slow down 2,4 min Nm - - automatic hydraulic release very intensive use from -15 C to + 60 C IP N (~10 kg) see drawing LIBRA C MA (suggested) irreversible 230V~ ± 10%, 50 Hz single-phase 40 W integrated in the control unit 15 s 1,8 min-1 1/ Nm torque limiter integrated in the control panel RIGEL 5 incorporated electric limit switch release knob intensive use from -15 C to + 60 C IP4X 160 N (~16 kg) see drawing

89 INDUSTRIAL USE 89 ACCESSORIES D RIGEL 5 See page 113 e 215,30 D LIBRA C MA See page 113 e 210,30 N SEB External key release for BERMA, FORB and IGEA LB BT models. e 17,70 P BT BAT Thanks to the back-up batteries and battery charger, the BT BAT kit guarantees low voltage operation of the leaf in the event of power failure. For PHOBOS BT, PHOBOS BT L, IGEA LB BT and IGEA BT models. e 92,30 DIMENSIONS igea LB BT DIMENSIONS FORB 360

90 90 BFT proposes lasting and reliable solutions for automating sectional industrial doors. In industrial contexts, where long-lasting security and durability are required, BFT operators meet even the most difficult needs.

91 Solutions for the automation of sectional doors ULISSE ulisse

92 ULISSE SERIES Electromechanical operator for industrial sectional doors CODE DESCRIPTION VOLTAGE DOOR WEIGHT* PRICE e Q.TY X PALLETS 92 P P P P P P P P P P ULISSE C ULISSE C ULISSE SB ULISSE SB ULISSE S C ULISSE S C ULISSE S C UP ULISSE S SB ULISSE S SB ULISSE C UP 230 V 400 V 230 V 400 V 230 V 400 V 400 V 230 V 400 V 400 V 2500 N = 18 m N = 36 m N = 18 m N = 36 m N = 25 m N = 40 m N = 40 m N = 25 m N = 40 m N = 36 m2 518,00 498,80 507,40 507,40 509,80 461,90 568,10 507,40 486,20 605, A MODEL FOR EVERY NEED. > Several versions available: 230 or 400 V, 4 or 6-pole, which allow different door opening and closing speeds on the basis of the weight and dimensions of the same. > Several versions available: with chain, fast release, and hold-to-run function (in the version with incorporated control panel). > Possible of direct or pulley transmission installation. Control panel Reversible/irreversible operator Power supply Absorbed power Thermal protection Opening or closing time Output revolutions Reduction ratio Max torque Impact reaction Type of limit switches No, poles motor Through-shaft Stroke Direct take-off Operating cycle Enviromental conditions Degree of protection Operator weight Dimensions TECHNICAL FEATURES ULISSE C/SB ULISSE C/SB ULISSE S C/SB ULISSE S C/SB SIRIO TMA (suggested) irreversible 230V~ ± 10%, 50 Hz single-phase 500 W integrated from 17 to min-1 1/43 45 Nm external active safety edge electric, incoporated and adjustable 6 Ø 25,4 mm 27,5 rpm yes semi intensive use from -15 C to + 60 C IP N (~10 kg) see drawing SIRIO TMA (suggested) irreversible 400V~ ± 10%, 50 Hz three-phase 770 W integrated from 17 to min-1 1/43 65 Nm external active safety edge electric, incoporated and adjustable 6 Ø 25,4 mm 27,5 rpm yes semi intensive use from -15 C to + 60 C IP N (~10 kg) see drawing SIRIO TMA (suggested) irreversible 230V~ ± 10%, 50 Hz single-phase 600 W integrated from 17 to min-1 1/43 40 Nm external active safety edge electric, incoporated and adjustable 4 Ø 25,4 mm 27,5 rpm no semi intensive use from -15 C to + 60 C IP N (~10 kg) see drawing SIRIO TMA (suggested) irreversible 400V~ ± 10%, 50 Hz three-phase 720 W integrated from 17 to min-1 1/43 65 Nm external active safety edge electric, incoporated and adjustable 4 Ø 25,4 mm 27,5 rpm no semi intensive use from -15 C to + 60 C IP N (~10 kg) see drawing

93 INDUSTRIAL USE 93 ACCESSORIES D ALPHA FR See page 113 e 258,00 N PIG 12/ULISSE S Z12 pinion gear kit for 1/2 x 5/16 chain. e 38,20 D SIRIO TMA See page 113 e 339,40 N PIG 18/ULISSE S Z18 pinion gear kit for 1/2 x 5/16 chain. e 38,20 D CAP5 5-m open release chain pack for ULISSE C. e 9,20 D CAP8 8-m open release chain pack for ULISSE C. e 13,70 N PIG 14/ULISSE S Z14 pinion gear kit for 1/2 x 5/16 chain. e 38,20 N COR 30 Z30 crown wheel assembly for 1 (25.4 mm) sectional door shafts, including key and 2m 1/2x5/16 chain. Suitable for sectional doors with 140 mm cablewinder pulleys. e 42,30 N COR 40 Z40 crown wheel assembly for 1 (25.4 mm) sectional door shafts, including key and 2m 1/2x5/16 chain and split link Suitable for sectional doors with 160 mm cable-winder pulleys. e 51, DIMENSIONS N PIG 30/ULISSE S Z30 pinion gear kit for 1/2 x 5/16 chain. e 39,20 166

94 94 Reserved areas, protected areas, working environments and sports clubs become much more secure with BFT access control times. Avant-garde applications and the broad range of accessories make it possible to create systems to measure for every need, capable of guaranteeing the maximum reliability and the possibility of managing a very high number of software functions and accesses.

95 Solutions for the automation of areas with controlled access COMPASS compass

96 COMPASS Access control system 96 A MODEL FOR EVERY NEED. > Multiple application possibility thanks to the broad range of cards managed (up to 6000) in standalone mode. > The wide range of components and accessories makes it possible to create a product to measure for every need. SMART TECHNOLOGY. > Parameter variations are made without interrupting operation of the system. SAFE USE. > Identification of the cards is carried out in an environment which is separate from the reading one, thereby guaranteeing the system s inaccessibility even if the card reader is tampered with. D COMPASS SC Stand-alone unit (with no permanent PC connection) The system performs independent access control, allowing functions to be configured via the Securbase Light or Securbase Plus software In stand-alone mode it is able to handle 6000 recognition devices and stores all associated events and relative date and time parameters. COMPASS-SC: Control unit for access control systems capable of handling up to 32 peripheral devices (Compass-485, RTD-CA). Supply voltage: 230 Vac. Inputs: open pushbutton, door status sensor. Passageway control output: 12A 250 Vac relay. Auxiliary output (door open alarm): 12A 250Vac relay. Connections: RS485 serial port for connecting to other system peripherals, RS232 serial port to communicate with the PC, USB serial port for connecting to the PC. Degree of protection: IP20. Number of storable events in the stand-alone version: without keypad. Alarms: Buzzer. Installation: wall-mounted e 164,60 D COMPASS SC USB The same characteristics as Compass SC but with serial USB interface for connecting to the personal computer. e 164,60 D COMPASS 232 To connect up to 19 Compass 485 units to the PC serial port All the readers can be connected to a PC by the network to increase the number of codes which can be managed Also includes operation of a Compass 485 unit COMPASS 232: Serial converter RS485 - RS232 Power supply voltage: 230 Vac Inputs: opening button, door status sensor Access control output: 10A 250V relay with insulated contact Degree of protection: IP20 Number of peripheral units which can be connected: 19 Number of cards which can be memorised in standalone version: 6000 Programming: by means of Master Cards or PC Installation: wall-mounted. e 90,40 D COMPASS 485 Installed inside the protected area, this unit memorises the card codes and receives signals from the Compass Slim. It manages: door opening input door status input door alarm output door lock output up to 6000 cards as a stand-alone system COMPASS 485: Management unit for Compass Slim Power supply voltage: 230 Vac Inputs: opening button, door status sensor Access control output: 10A 250V relay with insulated contact Auxiliary output (door-open alarm): 10A 250V relay Degree of protection: IP20 Programming: by means of Master Cards or PC Serial interface: RS485 (2 wires) Installation: wall-mounted. e 84,90 D COMPASS SLIM Proximity reader for indoor and outdoor use with compact size and thickness. Built with vandal-proof materials. Detection distance 3-4 cm. For combination with COMPASS - SC, 485, 232. COMPASS SLIM: Proximity reader to be used with COMPASS SC, 485, 232. Power supply voltage: 12Vdc (supplied by Compass SC, 485, 232) Degree of protection: IP44 Max connection distance between reader and management unit: 10 metres Reading distance: 5-10 cm Signal indications: Buzzer + two-colour LED Installation: wall-mounted. e 140 D COMPASS READER Proximity reader for indoors/outdoors, detection distance 3-4 cm. Always to be used with COMPASS Available while stock last. e 169,00

97 97 ACCESSORIES D COMPASS-ATS Anti-vandalism enclosure for COMPASS- READER. e 118,50 D RTD CA code rolling code receiver and built-in display for programming. It can be used with COMPASS SYSTEM. Makes it possible to manage openings with radio controls, with COMPASS ISOCARD and with COMPASS RING cards. e 143,80 D RTD CA code rolling code receiver and built-in display for programming. It can be used with COMPASS SYSTEM. Makes it possible to manage openings with radio controls, with COMPASS ISOCARD and with COMPASS RING cards. e 152,30 D COMPASS - ISOCARD Proximity card ISO standard. e 4,20 D COMPASS - ISOCARD PERSONALIZZATA On request, card customisation, with 1 colour, minimum quantity to be ordered 100 pcs (including clichés). e 7,50 D COMPASS - RING Key holder with incorporated transponder for reading by a proximity reader. e 5,80 D MITTO 2T Two-channel rolling code transmitter and transponder, incorporated for reading by a proximity reader. e 36,60 D MITTO 4T Four-channel rolling code transmitter and transponder incorporated for reading by a proximity reader. e 43,30 D SECURBASE Access control management database on PC. Operating system: Windows 95, 98, 2000, NT. Complete data storage management of: cards, readers, card groups, reader groups, card subgroups, reader subgroups, time band, calendar, antipassback function, card self-learning by means of system reader. The program provides an interesting graphic display of the system status (showing the plan of the area controlled, and the status of the alarms and accesses, the representation is animated and therefore shows the accesses being open and closed as they actually are in reality). Moreover, it will be possible to consult the list of the cards within the system at any time, and a whole range of enquiries about the steps completed will be available. Available only with COMPASS 232. e 110,90 P SECURBASE LIGHT Compass SC remote unit management software. The software makes it possible to program the Compass SC unit and all the associated functions completely. It also makes it possible to manage the control of accesses in real time by means of the display of all the events in table or graph form. All the remote management is implemented with the aid of a database completely synchronized with the internal memory of the Compass SC, permitting the complete management of the unit with the aid of a Windows-compatible graphical interface. Access control, implemented by means of the hardware system managed by the Compass SC, is made visible in graphical mode by means of the graphical display of the plan if this has been installed. It permits complete management of all the system s basic functions. Basic functions - Management of file records of persons and access control criteria relating to individual identification devices - Management and programming of 256 groups, 256 calendars and 256 time bands Associability of a person with one group from 256 available Management of 16 readers and associated programming parameters plus local network management Management of system reader and self-learning system Management of a protected antipassback area manage- ment of current and daylight-saving time and date Management of prepaid cards with premium rate readers. - PC management of single database - Multilingual operations (Italian, English, German, French, Portuguese and Spanish). e 153,80 P SECURBASE PLUS Similar to SECURBASE LIGHT but also permits management of advanced functions as specified below: - Management of 32 readers Management of daily, weekly, monthly and annual prepaid cards A person can be associated with four different groups from 256 available Management of 8 protected antipassback areas Multiple database management by PC, for programming several systems/installations Graphical management of persons belonging to a group Graphical management of protected areas and associated readers e 458,90

98 98 Accesses to private areas, apartment buildings, car parks, garages and industries: BFT produces automatic road barriers for openings of variable width for all these contexts. The entire range ensures broad installation versatility and a great maintenance simplicity.

99 Solutions for the automation of road barriers michelangelo BGV bgv MOOVI moovi

100 BGV SERIES Electromechanical operator for road barriers CODE DESCRIPTION VOLTAGE BOOM LENGTH PRICE e Q.TY X PALLETS 100 A MODEL FOR EVERY NEED. > Several versions available with low, medium and high speeds depending on the boom length. SMART TECHNOLOGY. > Boom balancing adjustable and controlled by a compression spring. P P P P P P P P P P P P P P P P P P P P BGV 30 right BGV 30 left BGV 30 INOX right BGV 30 INOX left BGV 45 right BGV 45 left BGV 45 INOX right BGV 45 INOX left BGV right BGV left BGV right BGV left BGV 60 right BGV 60 left BGV 60 INOX right BGV 60 INOX left BGV right BGV left BGV right BGV left 230 V 230 V 230 V 230 V 230 V 230 V 230 V 230 V 230 V 230 V 230 V 230 V 230 V 230 V 230 V 230 V 230 V 230 V 230 V 230 V 3 m 3 m 3 m 3 m 4.5 m 4.5 m 4.5 m 4.5 m 3.5 m 3.5 m 3.5 m 3.5 m 6-7 m 6-7 m 6-7 m 6-7 m 5-6 m 5-6 m 5-6 m 5-6 m 1472, , , , , , , , , , , , , , , , , , , , Control panel Reversible/irreversible operator Power supply Absorbed power Thermal protection Opening or closing time Impact reaction Type of lock Type of limit switches Manual release Operating cycle Environmental conditions Degree of protection Operator weight without boom Dimensions TECHNICAL FEATURES BGV 30 BGV 45 BGV 60 LEO MV D (incorporated) irreversible 230V~ ± 10%, 50 Hz single-phase 180 W integrated 3 s - mechanical opening/closing electric, incorporated and adjustable handle very intensive use from -10 C to + 55 C IP N (~60 kg) see drawing LEO MV D (incorporated) irreversible 230V~ ± 10%, 50 Hz single-phase 180 W integrated 6 s - mechanical opening/closing electric, incorporated and adjustable handle very intensive use from -10 C to + 55 C IP N (~60 kg) see drawing LEO MV D (incorporated) irreversible 230V~ ± 10%, 50 Hz single-phase 180 W integrated 12 s - mechanical opening/closing electric, incorporated and adjustable handle very intensive use from -10 C to + 55 C IP N (~60 kg) see drawing

101 RESIDENTIAL, APARTMENT-BLOCK AND INDUSTRIAL USE 101 ACCESSORIES N AI3 One-piece 3 m boom.* e 71,50 N ART degree articulated boom. e 264,30 N AI4,5 One-piece 4.5 m boom.* e 97,10 N ART degree articulated boom. e 264,30 N AI5 One-piece 5 m boom.* e 115,40 D BB BGV anchor base. e 23,50 D LIGHT KIT Boom blinking lights kit. e 81,30 N AI6 One-piece 6 m boom.* e 130,60 D FAF Fixed bar rest fork. e 27,10 Fence working passage -40 DIMENSIONS N AT6 6 m long round boom for BGV. Not articulatable.* e 212,30 N AT7 7 m round boom for counterweight barrier. Non-articulatable boom. For BGV only.* e 529,20 D SB Fence previously mounted on boom. Cannot be applied to MOOVI 30 models. Its application in the other models gives rise to a reduction of the overall length of the boom (see table). e 38,70 D GAM Movable boom rest rod (cannot be fitted on BGV 30 mod.). e 27,10 passageway

102 MOOVI SERIES Electromechanical operator for road barriers 102 CODE DESCRIPTION VOLTAGE BOOM LENGTH PRICE e Q.TY X PALLETS A MODEL FOR EVERY NEED. > Available in several versions, for openings from 3 to 5 m and speeds from 1.5 to 8 s. > Supplied with a wide range of accessories. P P P P P MOOVI 30 MOOVI 50 MOOVI 30S MOOVI 30 RMM MOOVI 50 RMM 230 V 230 V 230 V 230 V 230 V 3 m 5 m 3 m 3 m 5 m 805,10 805,10 951,90 871,10 871, SMART TECHNOLOGY. > Internal ventilation system. > Fast release with personalised key. > Predrilled frame to allow simpler installation of the accessories. Control panel Reversible/irreversible operator Power supply Absorbed power Thermal protection Opening or closing time Slowdown Impact reaction Type of lock Type of limit switches Manual release Control Operating cycle Environmental conditions Degree of protection Operator weight without the rod Dimensions TECHNICAL FEATURES MOOVI 30 MOOVI 50 MOOVI 30S MOOVI 30/50 RMM ALPHA BOM (incorporated) irreversible 230V~ ± 10%, 50 Hz single-phase 300 W integrated 4 s - - mechanical opening/closing electric, incorporated, adjustable fast release with personalised key - very intensive use from -10 C to + 55 C IP N (~36 kg) see drawing ALPHA BOM (incorporated) irreversible 230V~ ± 10%, 50 Hz single-phase 300 W integrated 8 s - - mechanical opening/closing electric, incorporated, adjustable fast release with personalised key - very intensive use from -10 C to + 55 C IP N (~36 kg) see drawing LEO MV D (incorporated) irreversible 230V~ ± 10%, 50 Hz single-phase 300 W integrated 1,5 s + slowdown adjustment integrated torque limiter mechanical opening/closing electric, incorporated, adjustable fast release with personalised key by encoder very intensive use from -10 C to + 55 C IP N (~36 kg) see drawing LEO MV D (incorporated) irreversible 230V~ ± 10%, 50 Hz single-phase 300 W integrated 4 s (MOOVI 30), 8 s (MOOVI50) adjustment intergated mechanical stop sensor mechanical opening/closing electric, incorporated, adjustable fast release with personalised key by encoder very intensive use from -10 C to + 55 C IP N (~36 kg) see drawing

103 boom ELL3 or ELL5 boom boom boom boom boom boom boom boom boom boom boom boom boom boom boom boom boom boom boom boom boom boom SB SB SB SB SB SB SB PCA (only above the boom) PCA PCA PCA PCA PCA PCA PCA PCA PCA PCA PCA PCA PCA (under and above the boom) PCA PCA PCA PCA KIT LIGHT and KIT LIGHT 1 LIGHT LIGHT LIGHT LIGHT LIGHT LIGHT LIGHT LIGHT + GA + GA + GA + GA + GA + GA + GA + GA +GA +GA +GA MOOVI GA or MOOVI GAMA GAMA GAMA GAMA GAMA GAMA GAMA GAMA GAMA GAMA GAMA GAMA Passageway MOOVI 30 (m) 1,9 1,9 2,0 2,3 2,3 2,4 2,7 2,7 2,5 2,6 2,9 2,2 2,2 2,3 2,6 2,7 2,8 3,0 3,0 2,9 3,0 3,0 Passageway MOOVI 50 (m) 3,3 3,3 3,5 3,9 4,0 4,2 4,6 4,8 4,4 4,5 5,0 3,6 3,6 3,7 4,3 4,4 4,6 5,0 5,0 4,8 5,0 5,0 example for MOOVI 30: lisse + SB + PCA + LIGHT + GA = Asta Max. ELL3 1,9m / example for MOOVI 50: lisse + SB + PCA + LIGHT + GA = Asta Max. ELL5 3,3m ACCESSORIES Calculating the maximum boom lenght of MOOVI30 and MOOVI 50 road barriers based on the accessories installed. RESIDENTIAL, APARTMENT-BLOCK AND INDUSTRIAL USE 103 N ELL 3 One-piece 3 m boom.* e 71,40 N ELL 5 One-piece 5 m boom.* e 115,40 P KIT MOOVI 130 External photocell post kit e 12,00 P KIT MOOVI LIGHT Lighting kit for 3 or 4.5 m booms. To be used in combination with the MOOVI PCA kit e 91,20 P KIT MOOVI LIGHT1 Lighting kit for 5 or 6 m booms. To be used in combination with the MOOVI PCA kit e 122,30 P MOOVI PCA Boom upper and lower casing profile in rubber for ELL3. e 27,20 D MOOVI GA Movable boom rest rod e 43,10 P MOOVI PCA Boom upper and lower casing profile in rubber for ELL5. e 48,50 Fence working passage -40 DIMENSIONS D MOOVI GAMA Movable boom rest rod, shock absorbing. e 64,50 D CBO MOOVI mod. anchor base. e 23,50 passageway P KIT MOOVI PRM Kit to protect hands from shearing. e 10,90 D SB Fence previously mounted on boom. Cannot be applied to MOOVI 30 models. Its application in the other models gives rise to a reduction of the overall length of the boom (see table). e 38,

104 104 For protection and for the security of all those spaces that require controlled access, BFT proposes strong retractable bollards which require the minimum maintenance. Thanks to their small aesthetic impact, they provide the ideal solution for places such as old city centres and zones of particular architectural merit.

105 Solutions for regulating parking and passage STOPPY stoppy

106 STOPPY SERIES Electromechanical operator for rising bollard 106 CODE DESCRIPTION VOLTAGE OPERATOR STROKE PRICE e Q.TY X PALLETS P P P P STOPPY L STOPPY LAR STOPPY F STOPPY 230 V 230 V 230 V 230 V 500 mm 500 mm 500 mm 500 mm 3156, ,90 703, , A MODEL FOR EVERY NEED. > Version with lights and alarm. > Can be configured as follows for power failure: automatic descent or extracted position (with optional Stoppy BAT accessory) SAFE USE. > Its reflective surface ensures visibility even at night. Control panel Reversible/irreversible operator Power supply Absorbed power Thermal protection Opening or closing time Slowdown Impact reaction Max torque Type of lock Type of limit switches Manual release Operating cycle Environmental conditions Degree of protection Operator weight Dimensions TECHNICAL FEATURES STOPPY STOPPY L STOPPY LAR PERSEO reversible 230V~ ± 10%, 50 Hz single-phase 120 W s J 700 Nm mechanical opening/closing integrated reversible in case of black-out very intensive use from -15 C to + 60 C IP N (~90 kg) see drawing PERSEO reversible 230V~ ± 10%, 50 Hz single-phase 120 W s J 700 Nm mechanical opening/closing integrated reversible in case of black-out very intensive use from -15 C to + 60 C IP N (~90 kg) see drawing PERSEO reversible 230V~ ± 10%, 50 Hz single-phase 120 W s J 700 Nm mechanical opening/closing integrated reversible in case of black-out very intensive use from -15 C to + 60 C IP N (~90 kg) see drawing

107 RESIDENTIAL, APARTMENT-BLOCK, INDUSTRIAL AND COMMERCIAL USE 107 ACCESSORIES D PERSEO See page 113 e 265,90 P STOPPY BAT Back-up battery kit that allows the bollard to stay up even in the event of power failure. e 159,80 DIMENSIONS

108 108 The broad range of BFT accessories makes it possible to customize every type of system according to different needs, without forgoing fundamental aspects such as security, reliability and simple installation.

109 Accessories 109

110 Control units Function Table of the main control panels FUNCTIONS ALCOR N ALPHA SD/FR ALTAIR P CAPRI 110 Management of up to 2 motors Management of automatic closing Photocell intervention setting Impulse lock on opening Impulse lock in TCA 4-step logic 3-step logic 2-step logic Management of leaf delay on closing Management of leaf delay on opening Legend: Basic functions The choice of one function excludes the other Only to be managed by means of UNIPRO/PROXIMA Function only managed by means of optional board Conforming to the EN12453 and EN12445 standards The functions indicated are not binding. BFT reserves the right to make any modifications without prior notice. Pedestrian leaf management Pre-alarm Courtesy light Gate-open warning light Second radio channel output Ram blow Separate management of opening and closing commands Management of hold-to-run controls 12 Vac/Vdc electric lock Rapid closing Traffic-light management Clock contact input management Lock holding Torque setting Ampere-stop Management of obstacle recognition device (encoder) Brake Slow down Supply to accessories in 24 Vac Back up battery EElink management Centralised control management Self-diagnosis Management of statistics Management of incorporated rolling-code receiver Control panel conforming to the EN12453 and EN12445 standards Radio autolearning

111 CAPRI TCA HYDRA QSG2R LIBRA C MA RIGEL 5 SD LEO D MA LEO MV D LINX QSC D MA SIRIO TEL VENERE D NETTUNO B NETTUNO S 111

112 OPERATORS-Control units Operator - control panel compatibility table 112 Legend Automations for rack sliding gates Electromechanical automations for swing gates Hydraulic automations for swing gates FAST NET system Roller shutter automations Automations for counterweight and spring-operated overhead doors Automations for balanced roll-up doors Automations for automatic doors Automations for industrial folding doors Automations for industrial sectionalsdoors Automations for road barriers and rising bollards Suggested Compatible The details specified are not binding. BFT reserves the right to make any modifications without prior notice. CONTROL UNIT AD LINEA ALCOR N ALPHA BOM ALPHA SD ALTAIR P CAPRI CAPRI TCA HYDRA R LEO D MA LEO MV LIBRA C MA LINX NETTUNO B NETTUNO S PERSEO QSC D MA RIGEL 5 SD SIRIO TEL VENERE VENERE D ALPHA FR OPERATORS DEIMOS BT DEIMOS DEIMOS 700 urano BT ICARO MA SP 4000 PHOBOS N BT PHOBOS N PHOBOS BT L PHOBOS L VIRGO IGEA BT IGEA E5 ELI 250 BT ELI 250 ORO ORO E LUX P4,5 P7 SUB DEIMOS BT NET KIT PHOBOS BT NET KIT LOOP PHEBE BOTTICELLI EOS 120 BERMA X 130 LINEA FORB IGEA LB BT ulisse MOOVI BGV STOPPY

113 Control units 113 P PROXIMA New-generation universal handheld programmer. This permits interaction with clonable-algorithm receivers and transmitters and with control units compatible with the EELINK protocol. Possibility of memorizing different lists of receivers. Simplified parameter management. USB interface for connection to the PC. E 422,50 P UNIPRO UNIPRO universal handheld programmer which makes it possible to interact with the receivers, transmitters and control panels compatible with the EELINK protocol. Available while stock last. E 422,50 D ALCOR N Ideal control panel for one or two motors up to 230V/0.5 HP of the hydraulic swing type. Easy wiring thanks to extractable terminals blocks. Safety thanks to the AUTODIAGNOSIS function with LEDs for detecting faults. Complete with incorporated two-channel receiver and pedestrian management. Programming upgraded with the following functions: locked shut maintenance, 3/4 step logic, pedestrian closure, separate opening/closing. Easy use with previous systems thanks to total compatibility with ALCOR SD. E 168,30 D ALTAIR P Universal control panel for one or two motors up to 230V/0.5 HP of the electromechanical swing type. Easy wiring also for centralized connections, thanks to the extractable terminal blocks and the AUTODIAGNOSTICS function. Security thanks to motor torque control, regulation of the working time for pedestrians and locked shut maintenance. Complete with incorporated 2-channel receiver and input for pedestrian opening. Total control of programming by digital display. Makkelijk in te stellen door middel van drie eenvoudige knoppen voor het instellen van de logica en de parameters. Makkelijk te gebruiken op bestaande systemen dankzij volledige compatibiliteit met ALTAIR. E 174,10 D ALPHA SD Ideal control panel for one or two motors up to 230V/0.5 HP of the sliding, swing and shutter type. Easy wiring thanks to extractable terminals blocks. Safety thanks to the AUTODIAGNOSIS function with LEDs for detecting faults. Complete with integrated two-channel receiver, pedestrian management, can manage a second snap-in receiver with advanced function. Analogue programming for the operating parameters and digital for managing the radio system. Easy use with previous systems thanks to total compatibility with MIZAR. E 162,10 P UNIRADIO UNIRADIO universal handheld programmer which makes it possible to interact with clonable algorithm receivers and transmitters. Available while stock last. E 422,50 D UNICAVO Serial cable for Unipro-PC connections. E 7,40 D UNIPOWER 12V power supply unit for Proxima, Unipro. E 19,50 D ALCOR SD Ideal control panel for one or two motors up to 230V/0.5 HP of the hydraulic swing type. Easy to wire thanks to extractable terminals. Ready for insertion of snap-in receiver. Safety thanks to AUTODIAGNOSIS with LED for detecting faults and to the delay in closing the second leaf. Complete with automatic or semiautomatic opening logics. Analogue programming for the operating parameters and the operating logic. East of use thanks to easy and simple programming. Available while stock last E 109,10 D ALTAIR Universal panel for one or two motors up to 230V/0.5 HP of the electromechanical swing type. Easy to wire also for centralised connections, thanks to extractable terminals and the AUTODIAGNOSIS function. Safety thanks to motor torque control. Complete with incorporated 2- channel receiver and input for pedestrian opening. Total control of programming by digital display. Easy to set by means of three simple buttons for programming logic and parameters. Available while stock last. E 169,10 D ALPHA FR Ideal control panel for a motor of the ULISSE single-phase series. Easy to wire thanks to extractable terminals and AU- TODIAGNOSIS function with LED. Safety guaranteed by lockable circuit breaker, start-stop buttons, and emergency stop button. Complete with integrated two-channel receiver and gate open indicator lamp, can manage a second snap-in receiver with advanced function. Analogue programming for the operating parameters and digital for managing the radio system. Easy use with previous systems thanks to total compatibility with MIZAR FR. E 258,00

114 Control units 114 D CAPRI Control panel suitable for an electromechanical motor for roller shutters without receivers. Easy use thanks to the simple functions usable. Safety thanks to the single wire or centralised commands and to the management of separate buttons, anemometer and twilight sensor. Complete with operating logics in a centralised environment with multi-level master up to eight zones. Total control of operation (step-by-step by button, zone closure from master, total control from Master 0). Easy setting by simple dip switches for enabling the various functions. E 64,60 D CAPRI TCA Control panel suitable for an electromechanical motor for shutters up to 350W. Easy use thanks to the incorporated receiver, automatic or manual 4-step logics. Safety thanks to the built in receiver handling rolling code transmitters, separate buttons. Complete with separate inputs for the OPEN, CLOSE, STOP and PHOTOCELL controls. Total control of operation thanks to LED autodiagnosis. Easy setting by simple dip switches for enabling the various functions. E 87,70 D HYDRA R QSG2 Panel suitable for one or two 24V (40+40W) motors for overhead doors. Easy use even in the event of power failure with back-up battery and AUTODIAGNO- SIS for detecting faults. Safety thanks to: electronic motor torque limitation, settable slowdown. Complete with incorporated two-channel receiver, ready for serial management, back-up batteries and electric lock. Total control of programming by digital display and three simple buttons. Easy setting using the AUTOSET function which allows automatic setting of the operating parameters. E 185,00 D LIBRA C MA Universal control panel for one or two 24V motors with limit switch with 1 or 2 wires. Easy to wire also for centralised connections, thanks to extractable terminals, and the AUTODIAGNOSIS function. Safety thanks to electronic antisquashing control with amperometric detection. Complete with incorporated two-channel receiver, ready for serial management, back-up battery and electric lock. Total control of programming by digital display and three simple buttons. Easy setting using the AUTOSET function which allows automatic setting of the operating parameters. E 210,30 D PERSEO Control panel adaptable for motors of the STOPPY series, can command up to four bollards Easy use thanks to the simple functions usable. Safety thanks to inputs dedicated to safety circuits and dedicated commands. Complete with operating logics in a centralised environment. Total control of operation thanks to adjustment of the operating logics. Easy setting by simple dip switches for enabling the various functions. E 265,90 D RIGEL 5 Universal control panel suitable for one or two 600W/230V motors (max W). Easy to wire also for centralised connections thanks to extractable terminals and the AUTODIAGNOSIS function. Safety thanks to control of braking and the motor torque. Complete with extractable 2-channel receiver, ready for fast coupling to receivers with greater capacity and advanced functions. Total control of programming by digital display and three simple buttons. E 215,30 D ME 12 Vac electric lock board for ALCOR N model and ALPHA SD model. E 37,80 D ME BT 24 Vac electric lock board for BT operators. E 17,20 D SS Gate open indicator board for ALCOR N (operation with limit switch). E 14,50 D SPL Preheating board for 1 or 2 LUX, SUB, ORO, P4,5-P7,BERMA and E5 operator models. Can be fitted inside control panels, models ALPHA SD, ALCOR N. Permits gate opening at regular speed even in particularly cold areas. The operator is able to work at -20 with this accessory. E 40,50 D SSR4 Traffic light board for RIGEL 4 SD control panel. E 35,10 D SSR5 Traffic light and preheating control board for RIGEL 5 control panel. The operator is able to work at -20 with this accessory. E 34,80 P SCS Serial connection board for ALTAIR P, LIBRA C MA, HYDRA R. E 9,60

115 Control units 115 P SCS 1 Serial connection board for QSC D MA, RIGEL 5 and ALTAIR P. E 10,40 D SD Control panel box. Protection rating IP55. E 26,70 N CRTR Set including 2 cable glands for 40 mm diam. pipe. These cableglands are necessary to comply with the current electrical safetystandards which prescribe the use of boxes with two holes closedby cable carriers for all control boards. E 4,10 D QSG2 Large control panel box. Permits plenty connection space. E 32,00 D SOG Optional board for ORION G BR (board incorporated in the BGV): permits separate open and close commands to use in the event of broken wires. Available while stock last. E 9,50 N CRTG Set including 2 cable glands for 32 mm diam. pipe with spiralsheath. These cable glands are necessary to comply with the cur-rent electrical safety standards which prescribe the use of boxeswith two holes closed by cable carriers for all control boards. E 2,50

116 Blinkers Superactive radio controls - Type approved for Europe 433 MHz frequency 116 D LAMPO AI 230V Blinker powered at 230Vac with integrated antenna. 4 m antenna cable. Only for receivers operating at a frequency of Mhz. E 38,60 D LAMPO AI 24V Blinker powered at 24Vac/dc with integrated antenna. 4 m antenna cable. Only for receivers operating at a frequency of Mhz. E 38,60 D LAMPO PA Blinker supplied with 230Vac and preset for antenna with 4 m cable. The antenna to be fixed to the blinker must be ordered separately (SL mod.). Available while stock last. E 31,80 D LAMPO PA 24V Blinker supplied with 24V ac-dc and preset for antenna with 4 m cable for 24V operators. Available while stock last. E 35,10 D LAMP NET Lamp Net blinker with extractable self-learning FAST-NET receiver for Mitto series rolling code transmitters. E 92,80 P PRL Protective gauge for LAMPO series blinkers. E 22,00 D SL 30, MHz rod for application to LAMPO PA blinkers. E 11,80 D SL MHz rod for application to LAMPO PA blinkers. E 11,80 D REO 2 Board type two-channel receiver for fitting on all boards with sockets (10 pcs/package). Available while stock last. E 69,00 D REO 2 E Two-channel receiver, with incorporated box and antenna, for external application. Available while stock last. E 63,40 D TEO 2 Micro transmitter two-channel transmitter (10 pcs/package). Available while stock last. E 29,80 D TEO 4 Micro four-channel transmitter (10 pcs/package). Available while stock last. E 36,50 D AEL 433 Radiocontrol antenna 433MHz, with 4 m cable. E 20,20 D SLM2 Blinker support for wall applications. E 3,50

117 Self-learning rolling-code radio controls - Type approved for Europe 433 MHz frequency Self-learning rolling-code receivers with built-in display type approved for Europe 433,92 MHz Frequency 117 D CLONIX 2 Two-channel receiver with 128 rolling codes. Using the cloning process by radio it is possible to replace or add transmitters to the receiver memory. Cloning is possible with MITTO transmitters. E 62,70 D CLONIX 2/2048 Two-channel receiver with 2048 rolling codes. Using the cloning process by radio it is possible to replace or add transmitters to the receiver memory. Cloning is possible with MITTO transmitters. E 76,90 D CLONIX 4 RTE Four-channel rolling code receiver 128 codes. It is possible to replace or add transmitters in the receiver s memory by means of the cloning process by radio. Cloning is possible with Mitto transmitters. Powered directly at 230V, with insulated relay outputs. Possibility of connection with Compass Slim and Seletto. Box with IP55 rating. E 110,00 P MRE Receiver for Rigel 5. E 34,40 D RTD code receiver with rolling code and built-in display for programming. E 141,60 N RTD RS Accessory which when installed on a RTD 512 or RTD 2048 board permits remote management by modem. E 30,10 D MOP Accessory that makes it possible to add an RTD output channel. E 4,60 D CLONIX 2E External two-channel receiver with 128 rolling codes. Using the cloning process by radio it is possible to replace or add transmitters to the receiver memory. Cloning is possible with MITTO transmitters. E 68,80

118 Self-learning rolling-code receivers with built-in display type approved for Europe 433,92 MHz Frequency Other LOOP ACCESSORIES 118 D RTD code receiver with rolling code and built-in display for programming. E 141,60 N RTD RS Accessory which when installed on a RTD 512 or RTD 2048 board permits remote management by modem. E 30,10 D MOP Accessory that makes it possible to add an RTD output channel. E 4,60 N AD 5027 Wheel+adapter pack for series 50 actuator for octagonal roller ø 60. Note: adapters for rollers of different form available on request. E 3,50 N MM8 Eye-ring for manual release. E 5,00 N MM9 45 universal joint for manual release. E 15,50 P ANEM Wind sensor. E 40,4 0 P CREP Twilight sensor. E 40,4 0 N MM10 90 universal joint for manual release. E 29,20 N MM m articulated crank with hook for manual release. E 24,70 N MM m rigid crank with hook for manual release. E 13,60

119 Rolling-Code coded transmitters Typeapproved for Europe - Frequency MHz Quartzed radio controls MHz frequency 119 D MITTO 2 12V Two-channel transmitter, 12 V, with rolling code. E 28,90 D MITTO 4 12V Four-channel transmitter, 12 V, with rolling code. E 35,70 N MITTO 2 12V/100 MITTO remote control block ready for fast programming on RTD receiver or using the programmer Proxima on all the receiver of the Clonix series. E 2.880,20 N MITTO 4 12V/100 MITTO remote control block ready for fast programming on RTD receiver or using the programmer Proxima on all the receiver of the Clonix series. E 3.567,90 D PR2 Wall radio control with rolling code. E 34,40 D RO 2 Quartz two-channel receiver for fitting on all boards with sockets (10 pcs/package). Available while stock last. E 69,00 D RO 2E Two-channel external receiver with antenna. Available while stock last. E 123,40 D RO 2 ES Two-channel external receiver without antenna. Available while stock last. E 105,70 D RO 4E Four-channel external receiver with antenna. Available while stock last. E 142,80 D RO 4 ES Four-channel external receiver without antenna. Available while stock last. E 124,10 D TO4 Miniaturized four-channel quartz transmitter (10 pcs/package). Available while stock last. E 38,40 D TO3D Transmitter with triple coding with four buttons for 3 codes. The first 3 buttons send a signal using 3 codes while the fourth button uses the third code with another channel. Useful in small apartment blocks with two gates in common and a private overhead door. Available while stock last. E 41,10 D AEL 30.8 Antenna for radio control MHz with 4 m cable. E 26,60 D TO2 Two-channel quartz transmitter with double coding (10 pcs/package). Available while stock last. E 35,40

120 Obstacle detection devices 120 P CELLULA 130 Flat self-aligning photocell receiver/transmitter pair for external application, range up to 30 m with 24 Vac/dc power supply. E 52,20 P CC50 Pair of aluminium posts for CELLULA 50 photocells. E 39,90 P CI 1,5 Safety edge for model FLCP2. Length 1,5 m. E 38,40 P CELLULA RFL Flat reflection photocell for external application, nominal activation distance 12 m, power 24Vac/dc. The photocell considerably simplifies the installation operation: a single transmitter/receiver is connected to the power supply. E 94,00 P RFLP Reflex reflector for CELLULAR FL reflection photocell. E 5,00 P FL NET Pair of photocells FL Net. E 72,90 P CSC 130 Aluminium post for photocell, mod. CELLULA 130, and mod. INTRO switch, plus CC130 post. E 96,40 P CI 1,7 Safety edge for model FLCP2. Length 1,7 m. E 42,30 P IT23 Connection interface for CELLULA RFL. It is possible to connect the CELLULA RFL in accordance with EN954-1 using this device. E 27,00 P PRO 130 Anodised aluminium guard for CELLULA 130. E 17,30 P CSC 50 Aluminium post for photocell, mod. CELLULA 50, and mod. INTRO switch. E 42,30 P CI 2 Safety edge for model FLCP2. Length 2 m. E 47,30 D CCI Flush container for CELLULA 50 and INTRO. E 1,40 P PFC1 Pair of foundation plates for CC50, CC130, CSC50, CSC130 and CC130/2 posts. E 25,50 P CI 3 Safety edge for model FLCP2. Length 3 m. E 66,00 P FLC 8K2 Control device for resistive 8.2KOhm safety edges. The compact dimensions of the interface board container permit installation inside the control panel or duct with a minimum diameter of 35 mm. E 44,00 P FL 100A Flat photocell receiver/transmitter pair for external application, range up to 50 m, power supply 24V. (10 pcs/package). E 56,20 P CC130 Pair of aluminium posts for CELLULA 130 photocells. E 39,90 P CI 4 Safety edge for model FLCP2. Length 4 m. E 85,90 P CELLULA 50 Photocell receiver/transmitter pair, range up to 30 m, power supply from 24 Vac to 31 Vac. E 62,60 P CC130/2 Pair of aluminium posts, for double photocell insertion, for CELLULA 130 photocells. E 88,70 P FLCP 2 Obstacle detection device consisting of two electronic boards with the respective sensors fixed to an aluminium section bar to use with the the associated safety edge. E 52,20 P CI 1 Safety edge for model FLCP2. Length 1 m. E 28,90 P CI 5 Safety edge for model FLCP2. Length 5 m. E 105,30

121 Obstacle detection devices 121 P CI 6 Safety edge for model FLCP2. Length 6 m. E 123,10 N TA Plug for bar to use when the pneumatic edge is shortened (10 pcs/package). E 1,90 P CM1500 Mechanical flush safety edge, length 1.5 m. E 52,20 D CMS Warning sign E 3,00 D FLEXY 6 Extensible cable for powering the FLCP safety edge applied in industrial sectional doors. Max extension 6 m. E 37,40 N BIR Low-profile rubber edge for barriers and overhead doors. E 12,90 P CM1700 Mechanical flush safety edge, length 1.7 m. E 56,00 N BAR 1 Rubber safety edge with support with plugs already fitted, length 1 m. E 25,00 D TB Plug for BIR. E 1,40 P CM2000 Mechanical flush safety edge, length 2 m. E 61,60 N BAR 1,5 BAR 1 version, length 1.5 m. E 32,80 P PRC2 Pneumatic relay for BAR edge with no. 2 pressure switches. E 31,80 P CM3000 Mechanical flush safety edge, length 3 m. E 78,20 N BAR 1,8 BAR 1 version, length 1.8 m. E 35,50 P PRC Pneumatic relay for BAR edge with no. 1 pressure switch. E 17,30 P CM4000 Mechanical flush safety edge, length 4 m. E 94,80 N BAR 2 BAR 1 version, length 2 m. E 38,90 P CM1000 Mechanical flush safety edge, length 1 m. E 44,90 P CM5000 Mechanical flush safety edge, length 5 m. E 111,40

122 Obstacle detection devices - In compliance with EN P VENTIMIGLIA Infrared obstacle detection device for BIR C safety edge compliant with standard EN E 60,00 P BIR C 1 Rubber safety edge, length 1 m. E 21,20 P BIR C 4 Rubber safety edge, length 4 m. E 69,00 P BIR C 5 Rubber safety edge, length 5 m. E 83,90 P BIR C 1,5 Rubber safety edge, length 1.5 m. E 28,60 P BIR C 6 Rubber safety edge, length 6 m. E 98,80 P BIR C 1,7 Rubber safety edge, length 1.7 m. E 31,60 P BIR C 2 Rubber safety edge, length 2 m. E 35,80 P BIR C 3 Rubber safety edge, length 3 m. E 54,00

123 Control device 123 D PC 2E Key switch for exterior with metal case. (10 pcs/package). E 22,90 D CM Magnetic key for LCM readers (10 pcs/package). E 3,80 P RMM 2 Two-channel metal detectors. 230V~ E 343,10 P EBPE Vac electric lock with zero stop resistance, with external release for max 75mm thick doors and gates. E 101,80 P INTRO Key switch for exteriors. Flush and column version. E 18,40 D CLC Column for magnetic key readers. Height 1 m. E 43,70 D PE2 External two-button panel (10 pcs/package). E 13,40 P EBP 24 24Vac electric lock with 230/24V transformer to be inserted in the control panel. E 86,60 P SC NET Key switch SC NET. E 32,30 D SPIRA 2X1 Magnetic loop 2x1 m. E 83,80 D ECB DX RH horizontal electric lock, 12V. E 75,00 D CRC Spare coded key for (10 pcs/package). When ordering, specify key series number. E 1,40 D PARKY LIGHT Traffic light. E 104,10 D ECB SX Left-hand horizontal electric lock. Also available in right-hand and vertical versions. E 75,00 D LCM Magnetic key reader. For column mounting - see model CLC. E 108,50 P RME Single-channel metal detector with installation base. Power supply 24Vac. Power supply LED. Channel LED. Pulse on release configuration. Presence relay with pulse or continuous operation. Pulse relay with deactivation possibility. E 208,80 P SELETTO Flush digital pushbutton panel, programmable for controlling pedestrian and vehicle access, usable with two operating modes: with serial connection and with interfacing with the COMPASS system E 68,10 P SELETTO E Flush digital ext. pushbutton panel, programmable for controlling pedestrian and vehicle access, usable with two operating modes: with serial connection and with interfacing with the COMPASS system E 71,20 P EBP 230 Vac electric lock with zero stop resistance. Also available in 50 mm, 75 mm versions and at 24V. E 63,90 P EBPE Vac electric lock with zero stop resistance, with external release for max 50mm thick doors and gates E 78,60 D ECB vertical Vertical electric lock, 12V. E 75,30

124 124 BFT proposes kits for the automation of sliding gates, swing gates and overhead doors in order to permit straightforward guided installation. Every kit not only includes the automation system but also all the accessories required for creating a complete system.

125 Kit solutions DEIMOS KIT DEIMOS BT KIT PHOBOS KIT PHOBOS BT KIT PHOBOS BT L KIT VIRGO KIT IGEA BT KIT PHEB KIT ORO KIT

126 Kit products 126 DEIMOS KIT R The Deimos Kit is used to automate sliding gates weighing up to 500 kg for residential use. Deimos Kit comprises: n 1 Deimos SR, operator with incorporated control board and rolling-code receiver n 1 Mitto 2 12V double-channel rolling-code transmitter n 1 pair of Cellula 130 photocells n 1 Intro key selector n 1 Lampo AI blinker with antenna Deimos BT Kit R Deimos BT Kit is used to automate sliding gates weighing up to 300 kg for residential use. Deimos BT Kit comprises: n 1 Deimos BT, operator with incorporated control board and rolling-code receiver n 1 Mitto 2 12V double-channel rolling-code transmitter n 1 pair of Cellula 130 photocells n 1 Intro key selector n 1 Lampo AI blinker 24V with antenna Phobos Kit R The Phobos Kit is used to automate swing gates with leaf length up to 1,80 m and weight up to 250 kg, for residential use. Phobos Kit comprises: n 2 Phobos operators n 1 Altair P, control panel with incorporated rolling-code receiver n 1 Mitto 2 12V double-channel rolling-code transmitter n 1 pair of Cellula 130 photocells n 1 Intro key selector n 1 Lampo AI blinker with antenna

127 127 Phobos BT Kit R The Phobos BT Kit is used to automate swing gates with leaf length up to 1,80 m and weight up to 250 kg, for residential use. Phobos BT Kit comprises: n 2 Phobos BT operators n 1 Libra C MA, control panel with incorporated rolling-code receiver n 1 Mitto 2 12V double-channel rolling-code transmitter n 1 pair of Cellula 130 photocells n 1 Intro key selector n 1 Lampo AI blinker 24V with antenna Phobos BT L Kit R The Phobos BT L Kit is used to automate swing gates with leaf length up to 5 m and weight up to 250 kg, for residential use. Phobos BT L Kit comprises: n 2 Phobos BT L operators n 1 Libra C MA, control panel with incorporated rolling-code receiver n 1 Mitto 2 12V double-channel rolling-code transmitter n 1 pair of Cellula 130 photocells n 1 Intro key selector n 1 Lampo AI blinker 24V with antenna VIRGO Kit R Is used to automate swing gates with the leaf length up to 2 m, and weight up to 200 kg, residential use. Virgo Kit comprises: n 1 Virgo, operator with incorporated control board and rolling-code receiver n 1 Virgo SQ, (VIRGO without control unit) n 1 Mitto 2 12V double-channel rolling-code transmitter n 1 pair of Cellula 130 photocells n 1 Intro key selector n 1 Lampo AI blinker 24V with antenna

128 Kit products 128 IGEA BT Kit R Is used to automate swing gates with the leaf length up to 2,5 m, and weight up to 200 kg, residential use. Igea BT Kit comprises: n 2 Igea BT, operator n 1 Libra MA R, control panel with incorporated rolling-code receiver n 1 Mitto 2 12V double-channel rolling-code transmitter n 1 pair of Cellula 130 photocells n 1 Intro key selector n 1 Lampo AI blinker 24V with antenna PHEBE Kit R The Phebe Kit is used to automate of counterweight overhead doors for residential use. Phebe Kit comprises: n 1 Phebe operator with incorporated control board and rolling-code receiver n 1 set of telescopic arms CBA n 1 wall support n 1 Mitto 2 12V double-channel rolling-code transmitter n 1 Lampo AI blinker 24V with antenna Oro Kit R The Oro Kit is used to automate swing gates with leaf length up to 1,80 m and weight up to 180 kg, for residential use. Oro Kit comprises: n 2 Oro hydraulic operators n 1 Alcor N, control panel n 1 Mitto 2 12V double-channel rollingcode transmitter n 1 pair of Cellula 130 photocells n 1 Intro key selector n 1 Lampo AI blinker with antenna

129 129

130 BFT TOOLS FOR INSTALLERS 130 Always close to the needs of professionals in the sale and installation of automation systems for homes and buildings, BFT offers tools which simplify their everyday work. TECHNICAL TRAINING COURSES BFT invites operators in the sector to take part in Technical Training Courses to update their knowledge of automation systems and discover how to install systems that comply with safety standards. LEONARDO BFT. THE FIRST INTERACTIVE SOFTWARE FOR THE CE CERTIFICATION OF INSTALLATIONS. Leonardo BFT is a software application which provides a simplified approach to the obligations deriving from Safety Regulations. It is possible to draw up the documents that make up the Technical Folder by following a guided sequence. PRACTICAL GUIDE TO REGULA- TIONS BFT's Practical Guide to Regulations gives the reader a complete overview of the Directives in the sector, summarising all the operations to carry out to meet the legal operations in force regarding the certification of compliance of the openings.

131 BFT CERTIFICATIONS 131 The quality of all BFT products is recognized by the most important certifications attesting to the reliability of our automation systems and the seriousness of our company structure. CE UNI EN ISO UNI EN ISO CSA

132 EElink protocol 132 EELINK is an exclusive programming system developed by BFT which, by means of connection to handheld programmers (Unipro, Uniradio and Proxima) makes it possible to transfer data from operators to PCs and vice versa. As a result, it is possible to keep a database (EEdbase) of the information memorized in the installed systems. The database also makes it possible to associate personal parameters with every system: name and surname of the proprietor, address, telephone number, name of the maintenance engineer, name of the owner of the radio control device, etc., facilitating the management of customers and preventive maintenance, for example. Furthermore, potentially complex functions such as the reconfiguration of the control panel or of the radio receiver in the event of replacement, or the configuration of a control panel starting from a standard or customized configuration, become much simpler with EElink as it is only necessary to press a few keys. Version 3 of EEdbase supports many functions for the Compass access control systems. Information managed by EElink for the control panels Operational parameters: work times, automatic closing time, phase displacement time, slowdown, torques, antisquashing sensitivity. Operating logic: 2/4 steps, pulse blocking on opening, photocell operation on opening, fast closure, prealarm, hold to run, photocell check. Operating statistics: number of manoeuvres, number of manoeuvres since the last maintenance, date of the last maintenance, identification of the terminal that carried out the maintenance, name of the system and version of the software

133 133 installed in the control panel. Self-diagnostic: in the state of rest, the control panel carries out a check of the state of all the inputs connected to it and, if any of them are in any state other than rest, this is communicated to the handheld programmer. Default configuration: EElink makes it possible to restore all the control panel configurations to the original factory default states with one single command. Information managed by EElink for the radio receivers Receiver capacity: number of transmitters the receiver can memorize. Configuration of the outputs: monostable, bistable, timed. System code: makes it possible to create clones of the memorized radio control devices and manage installations comprising many receivers. List of the memorized transmitters, their position in the memory and association between the receiver's keys and outputs. Information managed by EElink for the radio transmitters Serial number of the transmitter. Second rolling code cipher key. System code (for clones)

134 THE BFT WARRANTY 134 BFT protects its customers with an exclusive warranty valid for 30 months from the date of manufacture of the product. The return of a product covered by the terms of the warranty will result in its replacement with a newly manufactured equivalent product. The calculation of the 30 months' warranty runs from the date of manufacture, shown on the product in the form of an impressed code or an applied adhesive label. Counterfeiting or deleting the date of manufacture voids the validity of the warranty. To benefit from this special formula, the customer must accompany the returned goods with a transport document on which the following must obligatorily be indicated: - the product code; - the detailed description of the product; - the quantity returned. The warranty cannot be applied if: the failure has been caused by a system not installed in accordance with the instructions supplied by the company; components which are not original BFT parts have been used for installing the motorization; the failures are the result of tampering or improper repairs carried out by unauthorized personnel; the failures have been caused by improper or careless use; the causes of the failure are due to external agents such as: electrical discharges, tampering even accidental, impact even by accident, exposure to moisture or steam, use in extreme environmental or heat conditions, floods or other natural calamities. The replacement of parts during the warranty period shall not give rise to an extension of the expiry date of the warranty itself. No compensation shall be payable for the period during which the faulty system is inactive. BFT shall not be responsible for any damages, direct or indirect, caused to persons, things or pets by failure of the product, use for purposes not appropriate to its nature and/or its capacity, use over its capacity limit, and forced suspension in its use. The rights expressly envisaged in the consumer's favour by the regulations governing the sale of consumer goods are not affected in any way by this warranty.

135 CONDITIONS OF SALE 135 Effectiveness: these General Conditions of Sale replace the previous ones and are applicable to the orders for products bearing the BFT trademark or any other of its trademarks, addressed to BFT S.p.A. The following General Conditions of Sale govern all the sales by BFT to its customers, and constitute an integral part of the sales contract. Prices: this new BFT price list cancels and replaces all previous price lists. The price list with the most recent month as the date on the cover shall be deemed to be the one in force. Prices are intended to exclude VAT but include packaging. Payments: all payments must be made exclusively to BFT and made in accordance with the terms and procedures indicated in the invoice. Failure to pay in accordance with the agreed terms and procedures shall give rise, in favour of BFT S.p.A., of interest on arrears at the current bank rate increased by 3 points and shall entitle BFT to consider itself released from all further delivery commitments. Ownership: BFT is the owner of the goods sold until they have been paid for in full. The goods delivered are the full and exclusive property of BFT until their price has been paid in full. In the event of failure to pay, BFT shall be entitled to take immediate possession of the products sold wherever they are found even if they have been resold to third parties by the Customer in arrears. In this case, the Customer will be obliged to give notice of the names of the third-party purchasers of the products from whom BFT shall have the right to claim them back and resell them. Transport: the material is shipped by the supplier carriage paid for orders in excess of 1,550 before tax or in the case of replacements under warranty. The material is shipped with the addition of transport costs in the case of orders of less than 1,550 or in the case of repairs and replacements out of warranty. Complaints: at the moment of receipt of the goods it is necessary to check that the number of packs corresponds with the delivery note and inspect the state of the goods and packaging. In the case in which anomalies are noted, the associated complaints must be raised in written form by the purchaser and noted on the courier's delivery documentation at the moment of receipt of the goods themselves. A copy of this document must be sent by fax immediately to BFT within and no later than eight days from receipt of the goods, as must any complaints for other defects in the conformity of the goods not noticeable from the outward appearance of the packs. Products returned without prior agreement with BFT will be rejected in all cases. Furthermore, no claim can give any right to delays or suspensions of the terms of payments, which must in any case be made completely for all the undisputed goods. All delays in payment shall give rise to the immediate and total forfeiture of the warranty. Failure to transmit the complaints or disputes within the terms mentioned above, and/or the use of the product by the customer notwithstanding the discover of the defects, shall constitute unconditional acceptance of the product itself and waiver of any complaint or dispute with regard to the same. Modifications: BFT reserves the right, at any moment, to make the technical changes it deems appropriate for the improvement of the products contained in this price list, with this giving the Customer the right to make any claim whatsoever. Competent court: It is agreed that Italian Law shall be applicable to any dispute arising out of this contract and that territorial competence shall lie exclusively with the Italian Judges of the Court of Vicenza.

136 THE PLUS OF BFT ON THE TERRITORY 136 BFT operates in more than 100 countries around the world with over 450 distributors. We are present in 8 countries with branches that offer consultancy for the purchase, after-sales support and training courses.