DC Powered Lifting Trolleys

Transcription

1 Active Lifting Equipment - 34 York Street, Wingfield, SA 5013 Australia Phone: enquiries@activelifting.com.au DC Powered Lifting Trolleys Description The DC Lift Trolley range offers 100 & 250kgs of lifting force at the push of a button. It eliminates the need for manual pumping and provides a safe, clean, powered lift that is quiet and ideal when hydraulics can't be used.

2 DC lifting trolleys use a linear actuator and a Safetech developed battery box that powers up to 150 lifts per charge. Large diameter, low friction castors make the DC Lift Trolleys easy to move, highly manouverable and ideal for office or factory use. Power Drive DC Trolleys provide users with motorised variable speed travel as well as the powered lift function of the DC range. These Australian made trolleys incorporate a smooth drive mechanism developed by Lockwood electric mobility that has variable speed, reverse travel, soft start and excellent stability. Available in 250 kg and 100 kg models it provides users with effortless powered drive and lifting. Suitable for factory, warehouse and office applications it is easy to use and recharge directly from a wall mounted charger. Powerlift DC lifting trolleys now offer four models: 1. DC250 - with 250kg of Lifting Force 2. DCD100 - the double scissor lift option for when a higher lift is required 3. Power Drive DC Motor Drive DC Power Drive DCD100 - Motor Drive DCD100 How does the DC Scissor Lift Trolley work? The DC Lift Trolley is a small Scissor Lift Table that uses a linear actuator as the lifting mechanism. This eliminates hydraulic fluids or oils and provides a quiet, steady lift force. A high duty cycle, rechargeable battery supplies the power and a push button controller makes operating the DC Lift Trolleys effortless. Wheels are polyurethane with fixed front rear castored for easy mobility. DC Lifting Trolleys are powder coated for a quality finish and the actuator is rated IP54.

3 Applications Suitable for all general trolley applications but especially those where hydraulic contaminants can't be tolerated such as offices, vets and medical clinics. DCD 100 is ideal for shelf stacking. With the wheels removed the DC lift trolley can be used as a static lifting platform -see below a dog grooming table Options DC 250s have been adapted for use as baby change tables in day care and creche facilities. A static base frame can be supplied for use as a stable lifting platform. DCD 100 provides a double scissor option allowing lifting heights upto IP56 Rated Actuator available. Safety DC Lift Trolleys are very safe to use but as with all scissor mechanisms care must be taken to avoid any entrapment as it is operated. Limitations Maximum and minimum heights, loads greater than 250kgs. DC Lift Trolley Specifications

4 Model Cap. (kg) Vert. Stroke Min Height Max Height Standard Platform Size DC x 480 DCD x 480 * varies slightly with weight of load Elevatio n Time Seconds Chargin g ~20 * 240 Volt plug pack. ~20 * 240 Volt plug pack. Weight 43 kg 50 kg DCD kg Double Scissor Lift Trolley 100kgs of lifting force, Quiet, precise action with no hydraulics. Safe, clean, powered lift. DCD100 uses IP 56 linear actuator, Powder coated, suitable for wash down. DC-250 Trolley

5 Animal grooming This modified DC-250 was designed for Animal grooming.

6 Powered by TCPDF ( Platform: 895 x 480 (Standard). Larger sizes can be supplied at extra cost. Rubber surface Safety Bar Static base (no wheels) 240 volt power supply Pedestal push button controls mounted to base on one end 500 post with loop on top for clipping lead to. Product Gallery