Unit s 1 & New Berlin Road No.109 Jacksonville, Florida Global Power Generation Services, All Rights Reserved.

Transcription

1 Unit s 1 & 2

2

3

4 Turbine Generator Inspections Summary Unit s 1 & 2 are of the same design; Single Flow Condensing Steam Turbine with Hydrogen Cooled Generators, both sets are installed on an outdoor pedestal arrangement. The Turbines Generators Enclosures and Appearance Lagging is all in very good condition with little corrosion if any near the structural foundation connections. Visual inspection of the Low Pressure Turbine (LP) revealed very little water erosion on the turbine blades and the case, coupling and exhaust hood were all found in good condition. The Throttle Control Valves are all in good condition with albeit a film of surface corrosion is present on carbon steel components. The generator stator winding end turns and field coils were visually inspected with an industrial Videoscope and no abnormal conditions were detected. Photos Unit No. 1 Unit No. 2

5 Unit No. 1 Front Standard Unit No. 2 Extraction Valve Control Control Valves

6 Unit No. 1 Exhaust Hood Unit No. 2 Collector / Exciter End

7 Unit No. 1 Low Pressure Turbine Blades LP Bucket (Blade) Covers and Tenons LP Bucket Tie-Wire LP Bucket Leading and Trialing Edges, Indicator of Water Erosion

8 Unit No. 2 Low Pressure Turbine Blades LP Bucket (Blade) Covers and Tenons LP Bucket Tie-Wire LP Bucket Leading and Trialing Edges, Indicator of Water Erosion

9 Unit No. 1 Generator Borescope Generator Stator High Voltage Connection and Bushing Generator Stator Winding End Turns Generator Stator Wedges

10 Generator Field Wedges, Green Glass Top Insulation Generator Field Wedges

11 Unit No. 2 Generator Borescope Generator Stator High Voltage Bushings Generator Stator Winding End Turns Generator Stator Wedges

12 Generator Field Coil Wedges Generator Field Coil Wedges

13 Unit 3 & 4

14

15

16 Turbine Generator Inspections Summary Unit s 3 & 4 are of the same design; Double Flow LP Condensing Steam Turbines with Hydrogen Cooled Generators, both units are installed end to end on an outdoor pedestal arrangement. The Turbines Generators Enclosures and Appearance Lagging is all in very good condition with little corrosion if any near the structural foundation connections. Visual inspection of the Double Flow Low Pressure Turbine (LP) revealed very little water erosion on the turbine blades and the case, coupling and exhaust hood were all found in good condition. The Control Valves are all in good condition with albeit a film of surface corrosion is present on carbon steel components. The generator stator winding end turns and field coils were visually inspected with an industrial Videoscope and no abnormal conditions were detected. Photos Unit No. 3 Unit No. 4

17 Unit No. 3 Front Standard Unit No. 4 Extraction Valve Control

18 Unit No. 3 Exhaust Hood Unit No. 4 Collector / Exciter End

19 Unit No. 3 Low Pressure Turbine Blades LP Bucket (Blade) Covers and Tenons LP Bucket Tie-Wire LP Bucket Leading and Trialing Edges

20 Unit No. 4 Low Pressure Turbine Blades LP Bucket (Blade) Covers and Tenons LP Bucket Tie-Wire LP Bucket Leading and Trialing Edges

21 Unit No. 3 Generator Borescope Generator Stator Winding End Turns Generator Stator Wedges

22 Generator Field Coil End Turns Generator Field Coil End Turns

23 Unit No. 4 Generator Borescope Generator Stator Wedges Generator Field Wedges

24 Generator Field Coil End Turns Generator Field Coil End Turns