TEST REPORT CONCERNING THE COMPLIANCE OF A VOTING MACHINE FOR USE AT ELECTIONS IN IRELAND, BRAND NEDAP, MODEL P.R.U
|
|
- Florence Williams
- 5 years ago
- Views:
Transcription
1 Testing and certification of electric, electronic and radio equipment/installations including telecommunication systems TEST REPORT CONCERNING THE COMPLIANCE OF A VOTING MACHINE FOR USE AT ELECTIONS IN IRELAND, BRAND, MODEL, WITH PARTS OF THE STANDARDS IEC AND IEC FCC listed Industry Canada VCCI registered : : IC3501 : R-1518, C-1598 TNO Electronic Products & Services (EPS) B.V. P.O. Box ZG Niekerk (NL) Smidshornerweg TL Niekerk (NL) Telephone: Telefax: info@eps.tno.nl Web: Project number: r04 Page 1 of 8
2 N.V. Nederlandsche Apparatenfabriek Description of test item Test item : Manufacturer : N.V. Nederlandsche Apparatenfabriek Brand : Model : Serial numbers : -- Revision : -- Receipt number : 1 Receipt date : May 08, 2003 Applicant information Applicant's representative : Mr. Peter Greene Company : Department of the Environment and Local Government Address : Customhouse Postal code : -- City : Dublin-1 PO-box : -- Postal code : -- City : -- Country : Ireland Telephone number : Telefax number : Test(s) performed Location : Niekerk Test(s) started : May 08, 2003 Test(s) completed : May 22, 2003 Purpose of test(s) : Compliance with parts of the standard Test specification(s) : IEC and IEC Test engineer : A.W. Kars Project leader : A.W. Kars Report written by : A.W. Kars Report approved by : P. de Beer Report date : Aug. 08, 2003 This report is in conformity with NEN-EN-ISO/IEC 17025: This report shall not be reproduced, except in full, without the written permission of TNO Electronic Products & Services (EPS) B.V. The test results relate only to the item(s) tested. Project number: r04 Page 2 of 8
3 N.V. Nederlandsche Apparatenfabriek Table of contents 1 General Applied standards Detailed description of test configuration, input and output ports Description of test configuration Description of input and output ports Photograph of the EUT Test conditions Environmental conditions Operational mode(s) Test results Conclusion List of utilized test equipment....8 Project number: r04 Page 3 of 8
4 N.V. Nederlandsche Apparatenfabriek 1 General. 1.1 Applied standards. The, brand, model, has been tested in conformity with parts of the standards IEC and IEC Detailed description of test configuration, input and output ports. The, brand, model, in the configuration as described below, will be referred to as EUT for the purpose of this test report Description of test configuration. Test item : Manufacturer : N.V. Nederlandsche Apparatenfabriek Brand : Model : Serial number : -- Remarks : Description of input and output ports. Number Terminal From To Remarks 1 2 Mains power supply Polling Staff control unit Mains terminal Polling Staff Control box EUT EUT None < 2 m Table Photograph of the EUT. Project number: r04 Page 4 of 8
5 N.V. Nederlandsche Apparatenfabriek 1.3 Test conditions Environmental conditions. During all tests the environmental conditions were the following: Temperature : 22 ºC Relative humidity : 45 % Operational mode(s). During all tests the EUT was set up to function according to the manufacturer s instructions and powered as necessary to the standard requirements where specified. Project number: r04 Page 5 of 8
6 N.V. Nederlandsche Apparatenfabriek 2 Test results TEST CONDITIONS STANDARD CRITERIA RESULT Environmental + 5 ºC + 40 ºC IEC Functional before, No problem was found Temperature IEC during and Environmental - 25 ºC + 70 ºC IEC Functional before and No problem was found temperature (storage) Relative Humidity + 40 ºC at 85 % RH IEC Functional before, No problem was found (functional) during and Relative Humidity non + 40 ºC at 95 % RH IEC Functional before and No problem was found condensing (storage) Temperature change + 25 ºC + 30 ºC IEC Functional before and No problem was found (storage) Power supply 230 V +/- 10 % IEC Functional before and No problem was found fluctuation 50 Hz +/- 2 % Power cuts 500 ms black out IEC Functional before and No problem was found suppression up to 75 % Insulation > 10 MΩ at 2kV for 10 IEC Functional before and No problem was found seconds Energy consumption At least for 8 hours Not applicable. (not available) Table 2 The results of the tests, carried out in conformity with the standard IEC and IEC on a voting machine for use at elections in Ireland, brand, model, are depicted in table 2. Project number: r04 Page 6 of 8
7 N.V. Nederlandsche Apparatenfabriek 3 Conclusion. The voting machine for use at elections in Ireland, brand, model, complies with the requirements of parts of the standards IEC and IEC in the configuration and operational mode(s) as stated in this test report. Project number: r04 Page 7 of 8
8 N.V. Nederlandsche Apparatenfabriek 4 List of utilized test equipment. Inventory Number Description Marketing name Model Function generator Tektronix CFG Power analyzer Elcontrol Nanovip Multimeter H & P 34401A Power supply Behlman 150-C Power supply Clare A-203G Temperature chamber Heraeus VEM 03/ Climat chamber Vötsch VC0033 Project number: r04 Page 8 of 8
RENTING OF CLIMATIC TEST SYSTEMS
VTRK 500 (Vötsch climatic test system) Temperature range: 10-90 C Humidity range: 10-95% rh Dew point range: 5-89 C Test space volume: 500 litres Test space dimensions: W750xD880xH765mm External dimensions:
More informationFor full product information, visit Use the SpeedSpec Code or scan the QR Code for quick access to the specific web page.
Safety Interlock Switches D4S-N D4SN For full product information, visit www.sti.com. Use the SpeedSpec Code or scan the QR Code for quick access to the specific web page. Slim Safety Door Switches with
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60384-24-1 First edition 2006-06 Fixed capacitors for use in electronic equipment Part 24-1: Blank detail specification Surface mount fixed tantalum electrolytic capacitors with
More informationCTX 3 Control relays Cat. N (s) : /06/09..14/16/19..24/26/29
87045 LIMOGES Cedex Telephone: +33 5 55 06 87 87 FAX: +33 5 55 06 88 88 CTX 3 Control relays Cat. N (s) : 4 168 00..04/06/09..14/16/19..24/26/29 CONTENTS PAGES 1. Description - Use... 1 2. Range... 1 3.
More informationTDK-Lambda ZWS300BAF/A
ZWS3BAF/A SPECIFICATIONS A254-1-1/A-B MODEL ZWS3BAF ZWS3BAF ZWS3BAF ZWS3BAF ZWS3BAF ITEMS -12/A -15/A -24/A -36/A -48/A 1 Nominal Output Voltage V 12 15 24 36 48 2 Maximum Output Current A 25.. 12.5 8.4
More informationTDK-Lambda ZWS240BP/A SPECIFICATIONS
SPECIFICATIONS A253-1-1/A-B MODEL ZWS24BP ZWS24BP ZWS24BP ITEMS -24/A -36/A -48/A 1 Nominal Output Voltage V 24 36 48 2 Average Output Current A 1 6.7 5. 3 Peak Output Current (*1) A 2. 13.4 1. 4 Average
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60384-14 QC 302400 Third edition 2005-07 Fixed capacitors for use in electronic equipment Part 14: Sectional specification: Fixed capacitors for electromagnetic interference
More informationJAURA ORAM PATRAS EKKA CHANDRA MANI NAIK JANARDANA DEHURY
FORM-20 FINAL RESULT SHEET [See Rule 56 (7) ] Election to the. O.L.A... from the 14-BONAI.. Parliamentary Constitutency PART-1 (To be used both for Parliamentary and Assembly Elections) Name of the Assembly
More informationFORM-20 [See Rule 56 C( 7) ] FINAL RESULT SHEET Election to the Legislative Assembly from the 02 -BIJEPUR Assembly Constitutency PART-1
M-20 [See Rule 56 C( 7) ] FINAL RESULT SHEET Election to the Legislative Assembly from the 02 -BIJEPUR Assembly Constitutency PART-1 ASOK D 1 10 212 320 276 16 3 12 3 8 10 32 902 18 920 2 3 157 409 301
More informationPanel Model Adjust Adjust Power 5Hz-1MHz 20MHz BW 5Hz-1MHz % Output Jacks Range Range (W) (mv) (mv) (ma) ( VAC) (Option)
Z+ Series Features 2U high uilt-in US, RS232 & RS485 Optional LN, GPI & isolated analogue programming interfaces Outputs up to 650Vdc rbitrary function generation 5 year warranty Minimises system rack
More informationCompliance Certification Services Inc. Report No: MIL(CS101) Date of Issue: August 12, 2009 MIL STD 461E/ F TEST REPORT.
Compliance Certification Services Inc. MIL STD 461E/ F TEST REPORT For 20.1 Multimedia LCD Monitor Model Number: WMRM920-PIP Trade Name: itech Issued to itech Company LLC 41758 Christy Street, Fremont
More informationSPECIFICATION FOR APPROVAL
SPECIFICATION FOR APPROVAL Customer: Product Material No.: Model No. LF-GMD045YS Version : V1.4 Manufacturer: Sichuan Ledfriend Technology Co., Ltd Customer Approval Tested by Checked by Approved by Ledfriend
More informationISO INTERNATIONAL STANDARD. Pneumatic fluid power Cylinders Final examination and acceptance criteria
INTERNATIONAL STANDARD ISO 10099 Second edition 2001-05-01 Pneumatic fluid power Cylinders Final examination and acceptance criteria Transmissions pneumatiques Vérins Critères de réception et de vérification
More informationEMC and Durability Lab, HCL Technologies Ltd., #73-74, South Phase, Ambattur Industrial Estate, Chennai
Last Amended on - Page 1 of 10 I. EMI / EMC TESTS 1. IT Products / Household / Industrial / Medical / Network Telecommunications Equipment Radiated Emission Test (RE) CISPR11:2010 BSEN 55011:2010 CISPR22:2008
More informationTEST REPORT ENVIRONMENTAL EN 60529:1991+A1:2000
Page 1 of 15 Report No 130313TRFENV Report Reference No.... : TEST REPORT ENVIRONMENTAL EN 60529:1991+A1:2000 130313TRFENV Tested by... : Alessio Pelizzoni. Verified by... : Fabio Mauri. Date of issue...
More informationIrving Oil Whitegate Refinery Limited
Irving Oil Whitegate Refinery Limited Whitegate, Midleton, Co. Cork Testing Laboratory Registration number: 258T is accredited by the Irish National Board (INAB) to undertake testing as detailed in the
More informationTest Report. for. Chilicon Power 1563 Calle Patricia Pacific Palisades, CA USA. Project Number: G Prepared By:
Test Report for Chilicon Power 1563 Calle Patricia Pacific Palisades, CA 90272 USA Project Number: G100834560 Prepared By: Intertek 1500 Brigantine Drive Coquitlam, B.C. V3K 7C1 Canada Intertek Testing
More informationStandard Interlock Safety Switches
Subminiature Interlock Switches Key features: Only 78 x 30 x 1m Two actuator entrances provide flexibility for installation options Integrated molded cable reduces wiring time IP67 (IEC60529) Direct Opening
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15524 First edition 2011-11-01 Pneumatic fluid power Cylinders Single-rod short-stroke cylinders, 1 000 kpa (10 bar) series, bores from 20 mm to 100 mm Transmissions pneumatiques
More information600 Amp Surge Arrester
R&D Center 497 Schooley s Mountain Road Hackettstown, NJ 07840-3906 Tele: 908-852-1122 Fax: 908-813-2091 TEST REPORT NUMBER: 379-17-12164 DATE: 4-3-2012 REPORT OF TEST ON 600 Amp Surge Arrester Statements
More informationContact person Date Reference Page Ulf Lemke F027196A 1 (4) Wood Technology
issued by an Accredited Testing Laboratory Contact person Ulf Lemke 2014-01-22 3F027196A 1 (4) Wood Technology +46 10 516 50 32 ulf.lemke@sp.se 1002 ISO/IEC 17025 Nordic Comfort Products A/S P.O. Box 3
More informationElectronic Ignition Module
7 607 Electronic Ignition Module TQO31A27 Electronic ignition module for use with oil or gas burners operating with singleor double-pole ignition. The TQO31A27 and this Data Sheet are intended for use
More informationIndoor Linear 50W Driver SI-CU WW
Product Data Sheet Rev.2.0 2016. 5. 27 1# LED Driver Indoor Linear 50W Driver SI-CU1425001WW Constant Current LED Driver Features & Benefits Output Current Range: 500~1400 ma (adjustable via R-set) Output
More informationPage 1 of 9. FORM-20 FINAL RESULT SHEET [See Rule 56 (7) ] Election to the. O.L.A... from the 36-BHOGARAI.. ASSEMBLY Constitutency PART-1
FORM-20 FINAL RESULT SHEET [See Rule 56 (7) ] Election to the. O.L.A... from the 36-BHOGARAI.. ASSEMBLY Constitutency PART-1 (To be used both for Parliamentary and Assembly Elections) Total No of 203114
More informationF5 Platforms: FIPS Kit Installation MAN
F5 Platforms: FIPS Kit Installation MAN-0647-00 Table of Contents Table of Contents About the FIPS kit...5 Supported platforms...5 Apply tamper evidence seals to F5 platforms...5 Legal Notices...9 3 Table
More informationElectronic Ignition Equipment
7 608 Electronic Ignition Equipment TQG3 The TQG3 consists of a cable for connection to the safety shutoff valves of the VGU gas valves and electronic ignition equipment for use on gas boilers with single-
More informationAS/NZS AS/NZS
TEST REORT AS/NZS 4777.2 AS/NZS 4777.3 Grid connection of energy systems via inverters Grid protection requirements Report reference number... : 13TH0287-AS/NZS 4777_0 Date of issue......: 2014-01-22 Total
More information2271A Industrial Pressure Calibrator Extended specifications
2271A Industrial Pressure Calibrator Extended specifications General Specifications Power Requirements... 100 V ac to 240 V ac, 47 Hz to 63 Hz Fuse... T2A 250 V ac Specifications Max Power Consumption...
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 8178-2 Second edition 2008-04-15 Reciprocating internal combustion engines Exhaust emission measurement Part 2: Measurement of gaseous and particulate exhaust emissions under
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10100 Second edition 2001-08-01 Hydraulic fluid power Cylinders Acceptance tests Transmissions hydrauliques Vérins Essais de réception Reference number ISO 10100:2001(E) ISO
More informationSPECIFICATION FOR APPROVAL
SPECIFICATION FOR APPROVAL Customer: Product Material No.: Model No. LF-GMD065YB Version : V1.0 Manufacturer: Sichuan Ledfriend Technology Co., Ltd Customer Approval Tested by Checked by Approved by Ledfriend
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 8535-1 Fifth edition 2011-12-01 Diesel engines Steel tubes for highpressure fuel injection pipes Part 1: Requirements for seamless cold-drawn single-wall tubes Moteurs diesels
More informationEMC TEST REPORT. For The. 3-Phase Power Supply. Model: TPS300024
EMC TEST REPORT For The 3-Phase Power Supply Model: TPS300024 Prepared for: TDK-Lambda Americas, Inc. 401 Mile of Cars Way, Suite 325 San Diego, CA 91950, United States Testing performed per the following:
More informationISO 6022 INTERNATIONAL STANDARD. Hydraulic fluid power Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series
INTERNATIONAL STANDARD ISO 6022 Second edition 2006-02-01 Hydraulic fluid power Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series Transmissions hydrauliques Dimensions d'interchangeabilité
More informationDART Charger Product Description, Information and Specification
g Digital Energy DART Charger Product Description, Information and Specification Document Number : PRPI-029 Version : 1.00 Revision : 2 Date : 03.02.11 Classification: NOTICE OF COPYRIGHT & PROPRIETARY
More informationSAFETY COMPLIANCE TESTING FOR FMVSS 124 ACCELERATOR CONTROL SYSTEMS
REPORT NUMBER 124-GTL-07-001 SAFETY COMPLIANCE TESTING FOR FMVSS 124 ACCELERATOR CONTROL SYSTEMS HYUNDAI MOTOR COMPANY 2007 HYUNDAI ELANTRA 4-DOOR PASSENGER CAR NHTSA NO. C70502 GENERAL TESTING LABORATORIES,
More informationHydraulic fluid power Dimensions and requirements for screw-toconnect quick-action couplings for general purpose
INTERNATIONAL STANDARD ISO 14541 First edition 2013-03-15 Hydraulic fluid power Dimensions and requirements for screw-toconnect quick-action couplings for general purpose Transmissions hydrauliques Dimensions
More informationPage 1 of 11. No. of Valid Votes Cast in favour of VOTES NO. OF TENDERED NO OF REJECTED VOTES JUGAT MOHAN NAYAK BISHNU PRIYA NAYAK DR.
FORM-20 FINAL RESULT SHEET [See Rule 56 (7) ] Election to the Lok Sabha from the 4-KEONJHAR(ST).. Parliamentary Constitutency PART-1 (To be used both for Parliamentary and Assembly Elections) Total No
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60923 Edition 3.1 2006-09 Edition 3:2005 consolidated with amendment 1:2006 Auxiliaries for lamps Ballasts for discharge lamps (excluding tubular fluorescent lamps) Performance
More informationContact person Date Reference Page Hans Eriksson F000838G 1 (4) Wood Technology
issued by an Accredited Testing Laboratory Contact person Hans Eriksson 2015-03-26 5F000838G 1 (4) Wood Technology +46 10 516 54 28 hans.eriksson@sp.se 1002 ISO/IEC 17025 Nordic Comfort Products A/S P.O.
More informationContact person Date Reference Page Michael Lindblad F025884B 1 (1) Sustainable Built Environment
issued by an Accredited Testing Laboratory Contact person Michael Lindblad 2015-05-09 5F025884B 1 (1) Sustainable Built Environment +46 10 516 58 58 Michael.Lindblad@sp.se Accred. No. 1002 Testing ISO/IEC
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60383-2 First edition 1993-04 Insulators for overhead lines with a nominal voltage above 1 000 V Part 2: Insulator strings and insulator sets for a.c. systems Definitions, test
More informationPage 1 of 10. Total No of Electors in Assembly Constituency / Segment. No. of Valid Votes Cast in favour of SIBO SANKAR ULLAKA VOTES
FORM-20 FINAL RESULT SHEET [See Rule 56 (7) ] Election to the Lok Sabha fom the 21-KORAPUT Parliamentary Constitutency PART-1 (To be used both for Parliamentary and Assembly Elections) Name of the Assembly
More informationADD: Room New Victory House, Wing Lok Street, Central, HONG KONG
Customer Company & Address: GREEN CREATIVE ADD: Room 1206-7 New Victory House, 93-103 Wing Lok Street, Central, HONG KONG Contact Person: Guillaume Vidal Telephone: +86 21-62320308 Email address: guillaume@gc-lighting.com
More informationISO INTERNATIONAL STANDARD. Lubricants, industrial oils and related products (Class L) Family X (Greases) Specification
INTERNATIONAL STANDARD ISO 12924 First edition 2010-05-01 Lubricants, industrial oils and related products (Class L) Family X (Greases) Specification Lubrifiants, huiles industrielles et produits connexes
More informationCarl Stuart Ltd. Tallaght Business Park, Whitestown, Dublin 24. Calibration Laboratory Registration number: 270C
Tallaght Business Park, Whitestown, Dublin 24 Calibration Laboratory Registration number: 270C is accredited by the Irish National Board (INAB) to undertake calibration as detailed in the Schedule bearing
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60297-5-104 First edition 2001-01 Mechanical structures for electronic equipment Dimensions of mechanical structures of the 482,6 mm (19 in) series Part 5-104: Subracks and associated
More informationVerizon NEBS TM Compliance: FiOS Battery NEBS Testing Verizon Technical Purchasing Requirements VZ.TPR.9508 Issue 1, June 2011
Verizon NEBS TM Compliance: FiOS Battery NEBS Testing Verizon Technical Purchasing Requirements VZ.TPR.9508 Issue 1, June 2011 CHANGE CONTROL RECORD: Version Date Action* Reason for Revision 1 6/1/2011
More informationISO INTERNATIONAL STANDARD. Fluid power systems O-rings Part 1: Inside diameters, cross-sections, tolerances and designation codes
INTERNATIONAL STANDARD ISO 3601-1 Fifth edition 2012-03-01 Fluid power systems O-rgs Part 1: s, cross-sections, tolerances and designation codes Transmissions hydrauliques et pneumatiques Jots toriques
More informationG7S. Ordering Information. Plug-In Safety Relay. Safety Relay for Machine Control Conforms to EN Standard. H Suitable for safety circuits in press
Plug-In Safety Relay Safety Relay for Machine Control Conforms to EN Standard H Suitable for safety circuits in press machinery, machine tools, and other production machinery Do Not Remove H CE mark (conforms
More informationSolenoid Locking Safety Switches
HSC HSC Full Size Solenoid Locking Switches Key features: Rugged aluminum die-cast housing 00N locking retention force Flexible Installation: The actuator can be accessed from two directions Select from
More informationSafety technique. Emergency Stop Module BH 5928, BI 5928
Safety technique Emergency Stop Module BH 5928, BI 5928 with time delay safemaster 0226419 Function diagram According to EU directive for machines 98/37/EG According to IEC/E 60 204, E 954-1 Safety category
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 1179-3 First edition 2007-08-15 Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 3: Light-duty
More informationHigh-force: 230 g. Projected 7.3 mm General-purpose: 160 g. High-force: 230 g. Flat 4.3 mm General-purpose: 200 g.
Tactile Switch BW Tactile Switch with Sealed Construction for Automatic Soldering Sealed construction conforming to IP67 (IEC-6059) provides high reliability in locations exposed to dust or water. Available
More informationG3RV-SL Slim I/O Relay will be discontinued February 2019
NO: RL-163 PRODUCT: G3RV-SL Slim Relay DATE: February 2018 TYPE: Discontinuation Notice G3RV-SL Slim I/O Relay will be discontinued February 2019 Discontinuation Date: February 2019 Note: Date is subject
More informationDALI 650mA LED Driver
Installation Guide DGLC650C18DD PATENT PENDING REGISTERED DESIGN Designed in Australia to meet Australian Standards and installation conditions DIGINET.NET.AU Diginet Control Systems Pty Ltd ABN 89 095
More informationOPW Fluid Transfer Group Europe BV
Manual OPW Fluid Transfer Group Europe BV Tank Truck Tester 1397E & 1398E Disclaimer With this document an user manual is presented of the OPW tank-truck-tester 1397E & 1398E and is designed to use in
More informationSmartSensor 105 & Advance NEMA Salt Fog
SmartSensor 105 & Advance NEMA Salt Fog Test Report Wavetronix products mentioned: SmartSensor 105 SmartSensor Advance As contracted by Wavetronix, Environ Laboratories LLC performed a NEMA salt fog test
More informationPRO POWER 2 0 A L I T H I U M B AT T E RY C H A R G E R M O D E L : P P - L B C V E R S I O N : V 1. 0
PRO POWER 2 0 A L I T H I U M B AT T E RY C H AR G E R M O D E L : P P - L B C - 1 2 2 0 V E R S I O N : V 1. 0 Contents 1. Revised History... 1 2. Warning... 1 3. Notes... 1 4. Product Number System...
More informationContact person Date Reference Page Michael Lindblad F025884A 1 (1) Sustainable Built Environment
issued by an Accredited Testing Laboratory Contact person Michael Lindblad 2015-05-09 5F025884A 1 (1) Sustainable Built Environment +46 10 516 58 58 Michael.Lindblad@sp.se Accred. No. 1002 Testing ISO/IEC
More informationSolenoid Locking Safety Switches
Locking Safety Switches HSE HSE Full Size Locking Switches Key features: Plastic Housing: Lightweight 00N locking retention force Available with a red or green indicator Choose from circuit configurations
More informationSAFETY AND COMPLIANCE TESTING FOR SURESTOP
SAFETY AND COMPLIANCE TESTING FOR SURESTOP Tested Sample(s) Brand Model Color Size Vendor P/N Country of Origin Age Grading Children s Product : Bicycle Brake Pads : SureStop : SureStop Brakes Prepared
More informationAE 9... AE 40 Contactors NE... Contactor Relays
Technical data AE 9... AE 0 Contactors NE... Contactor Relays AE 9... AE 0 Contactors NE.. Contactor Relays Contents AE 9... AE 0 Contactors Description... 2 Ordering Details... 3 Technical Data... Terminal
More informationTesting Laboratory...: TÜV Rheinland Taiwan Ltd., Taichung Laboratory. Address...: 10F, No.219, Min Chuan Road, Taichung 403, Taiwan.
11009797 002 age 1 of 11 TEST REORT Flat non-rewirable two-pole plugs, 2.5 A 250 V, with cord, for the connection of class II - equipment for household and similar purposes Report Reference No....: 11009797
More informationRWS50B RWS100B RWS150B RWS300B RWS600B
RWS-B Series 50W to 600W Single Output General Purpose Power Supplies Features 10 Year e-cap Lifetime 7 Year Warranty Global Safety Approvals Compact Size Better Field Reliability Lower Cost of Ownership
More informationHydraulic fluid power Dimensions and requirements of quick-action couplings
INTERNATIONAL STANDARD ISO 7241 First edition 2014-07-15 Hydraulic fluid power Dimensions and requirements of quick-action couplings Transmissions hydrauliques Dimensions et exigences des raccords rapides
More informationContact person Date Reference Page Hans Eriksson F000838D 1 (3) Wood Technology
issued by an Accredited Testing Laboratory Contact person Hans Eriksson 2015-03-26 5F000838D 1 (3) Wood Technology +46 516 54 28 hans.eriksson@sp.se 02 ISO/IEC 17025 Nordic Comfort Products A/S P.O. Box
More informationFeatures. LED Driver. RACT09 9 Watt. TRIAC Dimmable. Single Output RACT09- AC/DC Converter
Features TRIAC Dimmable LED Driver Triac dimmable with leading or trailing edge dimmers Class II with SELV output (no earth required) Extra-large screw terminals and integrated cable clamps for easy installation
More informationA22NK. Key-type Selector Switches
Key-type Selector Switches -mm dia. Key-type Selector Switches Control panel miniaturization through a more compact design and modified wiring direction. Addition of Push-In Plus terminal blocks for easy
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 62133 First edition 2002-10 Secondary cells and batteries containing alkaline or other non-acid electrolytes Safety requirements for portable sealed secondary cells, and for
More informationCompact plastic limit switches with positive opening mechanism
Compact limit switches with positive opening mechanism LJK-N Series Positive opening mechanism Positive opening mechanism meets standards worldwide. A wide variety of actuators is available. The LJK-N
More informationEvaluation Certificate
SC0414-14 Certificate for a part of a measuring system for LOTW Forecourt controller, FuelNet Manager Issued to CODAB AB Höjdrodergatan 24, SE-212 39 Malmö, Sweden In respect of (part of instrument) Forecourt
More informationSmartOnline SUT Series 3-Phase 208/120V 220/127V 20kVA 20kW On-Line Double- Conversion UPS, Tower, Extended Run, SNMP Option
SmartOnline SUT Series 3-Phase 208/120V 220/127V 20kVA 20kW On-Line Double- Conversion UPS, Tower, Extended Run, SNMP Option MODEL NUMBER: SUT20K Highlights On-line double-conversion topology, VFI operation
More informationD4DS. Safety-Door Switch. Compact Safety Switch Saves Space and is Ideal for a Variety of Doors. H Conforms to EN (TÜV) standards.
Safety-Door Switch Compact Safety Switch Saves Space and is Ideal for a Variety of Doors H Conforms to EN (TÜV) standards. (positive opening mechanism isindicatedonthe switch) H Wide standard operating
More informationISO INTERNATIONAL STANDARD. Gas turbines Procurement Part 3: Design requirements
INTERNATIONAL STANDARD ISO 3977-3 Second edition 2004-08-15 Gas turbines Procurement Part 3: Design requirements Turbines à gaz Spécifications pour l'acquisition Partie 3: Exigences de conception Reference
More informationProduct brochure Generator circuit-breaker HVS-63S System type GCB with innovative built-in monitoring
Product brochure Generator circuit-breaker HVS-63S System type GCB with innovative built-in monitoring ABB is a leader in power and automation technologies that enable utility and industry customers to
More informationActuators for air dampers and control valves of oil burners
7 812 Actuators for air dampers and control valves of oil burners SQM1... SQM2... Reversible electromotoric actuators Torques: - SQM1... up to 10 Nm - SQM2... up to 20 Nm Running times: - SQM1... 14...100
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 3320 Third edition 2013-12-01 Fluid power systems and components Cylinder bores and piston rod diameters and area ratios Metric series Transmissions et composants hydrauliques
More informationSM 1231 ANALOGINPUT MODULE
SM 1231 ANALOGINPUT MODULE Function The SM 1231 analog input signal modules convert analog signals from the process into digital signals for internal processing by the SIMATIC S7-1200. Technical specifications
More informationDescription. Positive safety relays
Type N & KC Positive safety Description A.C. or D.C. operated DIN rail or panel mounting 600 volt heavy duty design, A600-10 amp, Q300-5 amp Snap-on accessories available: 1 & 4 pole adder deck Pneumatic
More informationRevision Transmittal Sheet
2 APPROVED WHITE IN LEARJET 31 RT 31-32-24 Revision Transmittal Sheet This page transmits Revision 1 to No. 31-32-24, Main Landing Gear Torque Link Replacement. Rework: No rework is required for aircraft
More informationSINGLE VOLTAGE EXTERNAL POWER SUPPLY TEST REPORT
SINGLE VOLTAGE EXTERNAL POWER SUPPLY TEST REPORT Prepared For : Product Name: PEAK ELECTRONIC(HUIZHOU)CO., LTD Add: No.1, Xialuo Road, Zhongkai Hi-tech Area, Huizhou, Guangdong, China DAB/FM radio Trade
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60254-1 Fourth edition 2005-04 Lead-acid traction batteries Part 1: General requirements and methods of test This English-language version is derived from the original bilingual
More informationTITLE: SPECIFICATION FOR BENCH VICE & BENCH GRINDER TABLE OF CONTENTS. 0.1 Circulation List. 0.2 Amendment Record
Page 1 of 10 TABLE OF CONTENTS 0.1 Circulation List 0.2 Amendment Record FOREWORD 1. SCOPE 2. REFERENCES 3. TERMS AND DEFINITIONS 4. REQUIREMENTS 5. TESTS AND INSPECTION 6. MARKING AND PACKING 7. DEMONSTRATION
More information250V 24V, 30V, 48V, 100 / 110V, 125V, 200 / 220V DC. 11mA. 2,000V AC / 1min. ±4.5kV, 3 times for each pole (1.2 / 50μs)
SEMAPHORE INDICATOR SPECIFICATIONS (RATINGS, PERFORMANCE) Type Specification Rated insulation voltage (Ui) 250V Rated operational voltage 24V, 0V, 48V, 100 / 110V, 125V, 200 / 220V ±15% (24V, 48V, 200
More informationD2SW. Sealed Subminiature Basic Switch Conforming to IP67 (Excluding the terminals on terminal models) Model Number Legend
ealed ubminiature Basic witch ealed ubminiature Basic witch Conforming to IP67 (Excluding the terminals on terminal ) Use of epoxy resin assures stable sealing, making this switch ideal for places subject
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61951-2 Second edition 2003-04 Secondary cells and batteries containing alkaline or other non-acid electrolytes Portable sealed rechargeable single cells Part 2: Nickel-metal
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 62391-2 First edition 2006-04 Fixed electric double-layer capacitors for use in electronic equipment Part 2: Sectional specification Electric double-layer capacitors for power
More informationDigital display Pressure range ON/OFF output Linear output Model
Slim Digital Pressure Sensor E8CB/ CSM_E8CB DS_E 1 with Built-in Microcomputer and Digital Display Withstands a of 9 kpa and highly reliable. Incorporates a two-turn adjuster ensuring easy setting. Be
More informationNEW AND EXTREME HIGH QUALITY CABLE GUARDS RED LINE USE WITH HIGH VOLUME VEHICULAR TRAFFIC
NEW AND EXTREME HIGH QUALITY CABLE GUARDS MANUFACTURED IN UK RED LINE USE WITH HIGH VOLUME VEHICULAR TRAFFIC BLACK LINE USE WITH LOW VOLUME VEHICULAR AND ALL PEDESTRIAN TRAFFIC RED FLOOR 3 SLOT AND 5 SLOT
More informationRoad vehicles Spark-plugs and their cylinder head housings Basic characteristics and dimensions
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 28741 Second edition 2013-11-15 Road vehicles Spark-plugs and their cylinder head housings Basic characteristics and dimensions Véhicules routiers
More informationContact person Date Reference Page Ulf Lemke F015337C 1 (4) Wood Technology
issued by an Accredited Testing Laboratory Contact person Ulf Lemke 2013-08-12 3F015337C 1 (4) Wood Technology +46 10 516 50 32 ulf.lemke@sp.se 1002 ISO/IEC 17025 Johanson Design AB Anders Anderssons väg
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 1179-1 Second edition 2013-11-01 Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 1: Threaded
More informationCompact plastic limit switches with positive opening mechanism
Compact limit switches with positive opening mechanism LJK-NSeries Positive opening mechanism Positive opening mechanism meets standards worldwide. A wide variety of actuators is available. The LJK-N conforms
More information650mA Phase Dimmable LED Driver
Installation Guide DGLC650C18PD PATENT PENDING REGISTERED DESIGN Designed in Australia to meet Australian Standards and installation conditions DIGINET.NET.AU Diginet Control Systems Pty Ltd ABN 89 095
More informationOWNER S GUIDE REMOTE CAR STARTER ADS-BZ1 ADS-BZ2 ADS-BZ3 ADS-BZ4 CONFORMITY COMPATIBLE WITH:
REMOTE CAR STARTER OWNER S GUIDE COMPATIBLE WITH: ADS-BZ1 ADS-BZ2 ADS-BZ3 ADS-BZ4 CONFORMITY FCC COMPLIANCE This device complies with FCC rules, and is subject to the following conditions: (1) This device
More informationSAFETY COMPLIANCE TESTING FOR FMVSS 124 ACCELERATOR CONTROL SYSTEMS
REPORT NUMBER 124-GTL-10-004 SAFETY COMPLIANCE TESTING FOR FMVSS 124 ACCELERATOR CONTROL SYSTEMS FORD MOTOR CO. 2010 LINCOLN MKS, PASSENGER CAR NHTSA NO. CA0209 GENERAL TESTING LABORATORIES, INC. 1623
More informationSwitching Power Supplies
Features Boxed Power Supplies with Screw Terminal Block Single- and Triple Output Models EMI Compliance with EN 55022 and FCC Part 15, Level B Short Cirquit Protection Overvoltage Protection High Efficiency
More informationComparison of IG Testing Standard. IGMA Summer Meeting August 8, 2004
Comparison of IG Testing Standard IGMA Summer Meeting August 8, 2004 1 The Task Compare the new Harmonized standards to: Old ASTM stds. Canadian stds. CEN stds. (Europe) ISO std. (proposed) 2 The Standards
More informationSmartOnline SUT Series 3-Phase 208/120V 220/127V 30kVA 30kW On-Line Double- Conversion UPS, Tower, Extended Run, SNMP Option
SmartOnline SUT Series 3-Phase 208/120V 220/127V 30kVA 30kW On-Line Double- Conversion UPS, Tower, Extended Run, SNMP Option MODEL NUMBER: SUT30K Highlights On-line double-conversion topology, VFI operation
More information