TDK-Lambda ZWS300BAF/A
|
|
- Henry Lane
- 5 years ago
- Views:
Transcription
1 ZWS3BAF/A SPECIFICATIONS A /A-B MODEL ZWS3BAF ZWS3BAF ZWS3BAF ZWS3BAF ZWS3BAF ITEMS -12/A -15/A -24/A -36/A -48/A 1 Nominal Output Voltage V Maximum Output Current A Maximum Output Power W Efficiency (Typ) VAC % (*1) VAC % Input Voltage Range (*2)(*3) VAC (47-63Hz) or 1-37VDC 6 Input Current (Typ) (*1) A 3.7/ /1.8 7 Inrush Current (Typ) (*1)(*4) - 15A at VAC, 3A at VAC, Ta=25 C, Cold Start 8 PFHC - Designed to meet IEC Power Factor (Typ) (*1) -.97/.93 1 Output Voltage Range V Maximum Ripple & Noise <Ta<7 C mv (*5) -1<Ta< C mv Maximum Line Regulation (*5)(*6) mv Maximum Load Regulation (*5)(*7) mv Temperature Coefficient (*5) - Less than.2% / C 15 Over Current Protection (*8) A Over Voltage Protection (*9) V Hold-up Time (Typ) (*1) - 18ms(typ) at VAC & Rated O/P Power, ms(typ) at VAC & 8% Load 18 Leakage Current (*1) - Less than.5ma..2ma (Typ) at VAC /.4mA (Typ) at 23VAC 19 Parallel Operation - - Series Operation - Possible 21 Operating Temperature C C ( C:%, +3 C:85%, ( C:%, + :8%, (*11) + C:7%, +5 C:55%, + C:%) +5 C:%, + C:%) 22 Operating Humidity - 3-9%RH (No Condensing) 23 Storage Temperature C 24 Storage Humidity - 1-9%RH (No Condensing) 25 Cooling - Convection Cooling 26 Withstand Voltage - Input - FG : 2kVAC (1mA), Input - Output : 3kVAC (1mA) Output - FG : 5VAC (ma) for 1min 27 Isolation Resistance - More than MW at 25 C and 7%RH Output - FG : 5VDC 28 Vibration - At no operating, 1-55Hz (Sweep for 1min) 19.6m/s 2 Constant, X,Y,Z 1hour each. 29 Shock - Less than 196.1m/s 2 3 Safety - Approved by UL95-1, CSA95-1, EN95-1, EN5178 (OV II), Designed to meet DENAN at VAC only. 31 Conducted Emission - Designed to meet EN5511/EN5522-B, FCC-B, VCCI-B 32 Radiated Emission - Designed to meet EN5511/EN5522-B, FCC-B, VCCI-B 33 Immunity - Designed to meet IEC-6-2 IEC-4-2, -3, -4, -5, -6, -8, Weight (Typ) g 8 35 Size (W x H x D) mm 95 x 53 x 212 ( Refer to Outline Drawing ) *Read instruction manual carefully, before using the power supply unit. =NOTES= *1. At VAC/VAC, Ta=25 C, nominal output voltage and maximum output power. *2. For cases where conformance to various safety specs (UL, CSA, EN) are required, to be described as - 2VAC (5-Hz). *3. Output derating needed when input voltage less than 9VAC. Fig. A Refer to LOAD vs. INPUT VOLTAGE (24V/36V/48V: A /A-_, 12V/15V: A /A-_). *4. Not applicable for the in-rush current to Noise Filter for less than.2ms. *5. Please refer to Fig. A for measurement of Vo, line & load regulation and ripple voltage. * VAC, constant load. *7. No load-full load, constant input voltage. *8. Constant current limit with automatic recovery. Avoid to operate at over load or short circuit condition. *9. OVP circuit will shut down output, manual reset (Re power on). *1. Measured by the each measuring method of UL, CSA, EN and DENAN (at Hz), Ta=25 C. C1 : Film Cap..1 mf *11. Output Derating C2 : Elect. Cap. mf - Derating at standard mounting. Refer to (24V/36V/48V: A /A-_, 12V/15V: A /A-_). - When forced air cooling, refer to forced air cooling specifications (A /A-_, 24V/36V/48V: A /A-_, 12V/15V: A /A-_). - Load (%) is percent of maximum output power or maximum output current, do not exceed its derating of maximum load.
2 ZWS3BAF/A A /A OUTPUT DERATING *COOLING : CONVECTION COOLING Ta ( C) MOUNTING B MOUNTING C Ta ( C) MOUNTING D,E MOUNTING F *COOLING : CONVECTION COOLING INPUT VOLTAGE (VAC) -F (CONVECTION COOLING) 1 LOAD vs. INPUT VOLTAGE 8 8 MOUNTING B MOUNTING C MOUNTING D,E MOUNTING F -F Ta ( C) INPUT VOLTAGE (VAC) MOUNTING B MOUNTING C MOUNTING D MOUNTING E MOUNTING F (INPUT)
3 ZWS3BAF/A SPECIFICATIONS A /A-A MODEL ZWS3BAF ZWS3BAF ZWS3BAF ZWS3BAF ZWS3BAF ITEMS -12/A -15/A -24/A -36/A -48/A 1 Nominal Output Voltage V Maximum Output Current (*1) A Maximum Output Power (*1) W Efficiency (Typ) VAC % (*2) VAC % Input Voltage Range (*3)(*4) VAC (47-63Hz) or 1-37VDC 6 Input Current (Typ) (*2) A 3.7/1.9 4./2. 7 Hold-up Time (Typ) - 18ms(typ) at VAC & Rated O/P Power, 16ms(typ) at VAC & Rated O/P Power, ms(typ) at VAC ms(typ) at VAC & 7% Load (*2) & 8% Load 8 Operating Temperature C ( C:%, +5 C:8%, + C:%) (Air velocity>.7m/s) C C ( C:%, +5 C:8%, + C:%) ( C:%, + C:7%) (Air velocity>1.4m/s) (Air velocity > 1.4m/s) 9 Cooling (*1) - Forced Air Cooling 1 Radiated Emission - Designed to meet EN5511/EN5522-A, FCC-A, VCCI-A *For other specification items, refer to standard specifications. =NOTES= *1. Forced air cooling with air velocity more than.7m/s for 24V/36V/48V. Forced air cooling with air velocity more than 1.4m/s for 12V/15V. (Measured at component side of PCB, air must flow through component side). *2. At VAC/VAC, Ta=25 C, nominal output voltage and maximum output power. *3. For cases where conformance to various safety specs (UL, CSA, EN) are required, to be described as - 2VAC (5-Hz). *4. Output derating needed when input voltage less than 9VAC. Refer to LOAD vs. INPUT VOLTAGE (24V/36V/48V: A /A-_, 12V/15V: A /A-_). *5. Output Derating - When forced air cooling, refer to ( 24V/36V/48V: A /A-_, 12V/15V: A /A-_). - Load (%) is percent of maximum output power or maximum output current, do not exceed its derating of maximum load.
4 ZWS3BAF/A A /A OUTPUT DERATING *COOLING : FORCED AIR COOLING Ta ( C) -F Ta ( C) -F Air velocity >.7m/s : Air velocity > 1.4m/s : Air must flow through component side. Air must flow through component side. 1 (FORCED AIR COOLING) 8 -F Air velocity>.7m/s -F Air velocity>1.4m/s Ta ( ) MOUNTING B MOUNTING C MOUNTING D MOUNTING E MOUNTING F (INPUT)
5 ZWS3BAF/A A /A OUTPUT DERATING (12V, 15V) *COOLING : CONVECTION COOLING Ta ( C) MOUNTING B MOUNTING C Ta ( C) MOUNTING D,E MOUNTING F INPUT VOLTAGE (VAC) -F (CONVECTION COOLING) 1 LOAD vs. INPUT VOLTAGE 8 8 MOUNTING B MOUNTING C MOUNTING D,E MOUNTING F -F Ta ( ) INPUT VOLTAGE (VAC) MOUNTING B MOUNTING C MOUNTING D MOUNTING E MOUNTING F (INPUT)
6 ZWS3BAF/A A /A OUTPUT DERATING (12V, 15V) *COOLING : FORCED AIR COOLING Ta ( C) -F Air velocity > 1.4m/s : Air must flow through component side. 1 (FORCED AIR COOLING) 8 -F Air velocity>1.4m/s Ta ( ) MOUNTING B MOUNTING C MOUNTING D MOUNTING E MOUNTING F (INPUT)
TDK-Lambda ZWS240BP/A SPECIFICATIONS
SPECIFICATIONS A253-1-1/A-B MODEL ZWS24BP ZWS24BP ZWS24BP ITEMS -24/A -36/A -48/A 1 Nominal Output Voltage V 24 36 48 2 Average Output Current A 1 6.7 5. 3 Peak Output Current (*1) A 2. 13.4 1. 4 Average
More informationZWD100PAF. Conformity to RoHS Directive
-SERIES Dual Output W - 225W Features 15 Complies the standard of the harmonics current limiter Worldwide input: 85-265VAC Peak load accommodatable double power: Approximately twice the value of average
More informationRWS50B RWS100B RWS150B RWS300B RWS600B
RWS-B Series 50W to 600W Single Output General Purpose Power Supplies Features 10 Year e-cap Lifetime 7 Year Warranty Global Safety Approvals Compact Size Better Field Reliability Lower Cost of Ownership
More informationMODEL ZWS50-BAF ZWS75-BAF ZWS100-BAF ZWS150-BAF ZWS300-BAF
ZWS-BAF Series www.uk.tdk-lambda.com/zws-baf 50W to 300W Single Output Power Supplies, Low Cost & High Reliability Worldwide Use Features 10 Year e-cap Lifetime 5 Year Warranty Convection Cooling Benefits
More informationUNA SERIES Embedded Power Supply Features Model naming method UNA 350P / Applications UNA Conformity to RoHS Directive Product Line-up
SERIES 350PB, PN 350PB/350PN Specifications CH 2 3 5 Voltage Range (*)(*8) V AC85-265 (AC85-5 : Need output derating) Frequency (*)(*8) Hz 7-63 Power Factor (00/20VAC)(typ) (*5) 0.98 / 0.92 (Ta=25) Input
More informationEVS Series. 300 and 600W Constant Current Power Supplies. EVS Series 1. Specification
EVS Series www.emea.tdk-lambda.com/evs 300 and 600W Constant Current Power Supplies Features Benefits 300W Convection cooled and 600W fan model Silent fanless chargers CC (constant current) mode Quick
More informationRWS-B Series. 50W to 600W Single Output General Purpose Power Supplies. RWS-B Series 1. Specification
RWS-B Series www.uk.tdk-lambda.com/rws-b 50W to 600W Single Output General Purpose Power Supplies Features 10 Year e-cap Lifetime 5 Year Warranty Global Safety Approvals Compact Size Benefits Better Field
More informationRWS-B Series. 100W to 600W Single Output General Purpose Power Supplies. RWS-B Series 1. Specification
RWS-B Series www.uk.tdk-lambda.com/rws-b 100W to 600W Single Output General Purpose Power Supplies Features 10 Year e-cap Lifetime 5 Year Warranty Global Safety Approvals Compact Size Benefits Better Field
More information300W 600W 1000W 1500W
HWS/ME Single Output 300W-1500W Features AC-DC switching power supply for medical equipment. Approval UL60601-1 (*1) Approval EN60601-1 (*1) Approval CSA C22.2 No.601.1-M90 (*1) Environmentally-friendly:
More informationMODEL SELECTION TABLE Open Frame Models. MODEL SELECTION TABLE U-Chassis Models. MODEL SELECTION TABLE Enclosed Models
Open Frame ( O Type) U-Chassis ( U Type) Enclosed ( C Type) DIN Rail Kit ( DN Type) Size: 5in x 3in x 1.16~1.24in (127mm x 76.2mm x 29.5~31.5mm) Size: 5in x 3~3.23in x 1.5in (127mm x 76.2~82.2mm x 38.1mm)
More informationCUT75 Series. Dual or Triple Output 75W Low Profile Power Supplies. CUT75 Series 1. Specification
CUT75 Series www.emea.tdk-lambda.com/cut Dual or Triple Output 75W Low Profile Power Supplies Features Benefits Triple (useable as dual) output supply Addresses multiple voltage needs in one hit Compact
More information<Designed to meet harmonic current regulations> Board type, ultra-small size, and low cost
SERIES Board type, ultra-small size, and low cost Ordering Information Switching power supplies General Description 2. Allowable Input Voltage Range AC85
More informationPRODUCT SPECIFICATION OUTPUT CURRENT (A) OUTPUT CURRENT TOLERANCE ±7% ±7% ±10% ±10% ±7% 1.8. Units % % % Typ. Typ.
0-10V Dimmable FEATURES: AC Input 100~277VAC Built-in Active PFC Function Protection: SCP / OVP / OTP 24V Auxiliary Output 0-10V Dimming Control Dimming 1 ~ 100 Flicker Free High Operating Ambient Temp.:
More information350W Slim Type with PFC Switching Power Supply
Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 2000000000 350W Slim Type with PFC Switching Power Supply S&E GB4943 UL950-1 EN950-1 EN335-1 IEC950-1 % - ~+ Industrial automation machinery
More information60W Single Output LED Power Supply. HBG-60 series. File Name:HBG-60-SPEC
Ⅱ { SPECIFICATION MODEL HBG-60-10 HBG-60-10 HBG-60-2 OUTPUT INPUT RATED CURRENT CURRENT ACCURACY EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT (Typ.) LEAKAGE CURRENT SHORT CIRCUIT PROTECTION OVER TEMPERATURE
More informationCUS200M Series. Single Output 200 to 250W Medical & ITE Power Supplies. CUS200M Series 1. Specification
CUS200M Series www.emea.tdk-lambda.com/cus200m Single Output 200 to 250W Medical & ITE Power Supplies Features Benefits IEC 1-1 (2x MOPP) & IEC 950-1 Approvals Suitable for B & BF type Medical and ITE
More informationSELV IP30 (CCC optional)
Features Constant Voltage + Constant Current mode output Plastic housing with Class II design Built-in active PFC function Class 2 power unit Fully encapsulated with IP30 level, optional IP67 rating Typical
More informationLPF-25 series. 25W Constant Voltage + Constant Current LED Driver
F 110 M M SELV IP67 Features Constant Voltage + Constant Current mode output Plastic housing with Class II design Built-in active PFC function Class 2 power unit Fully encapsulated with IP67 level Typical
More informationUHP-200 series. 200W Slim Type with PFC Switching Power Supply. File Name:UHP-200-SPEC GB4943 EN EN UL IEC
Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 000000000 GB494 UL950- EN950- EN5- IEC950- % - ~+ R SPECIFICATION MODEL UHP-00 -. UHP-00-4. UHP-00-5 UHP-00 - UHP-00-5 UHP-00-4 UHP-00-6
More informationINDUSTRIAL POWER SUPPLIES SFL-SERIES
INDUSTRIAL POWER SUPPLIES SFL-SERIES Operating Instructions 1. Application The SFL-series are compact, rugged switching power supplies designed for applications in process automation and other industrial
More informationPRODUCTS: POWER SUPPLY
PRODUCTS: POWER SUPPLY Impact Lighting Inc. All rights reserved. Impact Lighting Inc. Reserves the right to change specifications without notice. 138 POWER SUPPLY 15W AC-DC [12V/1.25A] UNIVERSAL POWER
More informationDC/DC converter SINGLE OUTPUT
DC/DC converter SINGLE OUTPUT SOPHISTICATED DC/DC TOPOLOGY! η = 94%!! DC/DC high efficiency module Wide Input range Various output voltages High output current High efficiency up to 94% Approved: UL60950,
More informationSpecifications 2019-V AC-DC Din Rail Mounted Power Supply IS-70 Series, 70W
2019-V1.0-0318 Specifications AC-DC Din Rail Mounted Power Supply IS-70 Series, 70W No. 545 Museum Road Yangzhou, Jiangsu China 225009 Tel: 86 (514) 8279 1592 Fax: 86 (514) 8769 3159 2019 AC-DC Din Rail
More informationPAF SERIES. Features. Model naming method PAF 500 F / Conformity to RoHS Directive. Applications. Product Line up. DC/DC Module 400W-700W PAF
SERIES DC/DC Module 400W-700W 2 Features Full brick industry standard size (61 12.7 116.8mm) High power density (industry-leading level in 700- F48) Broad range of baseplate operating temperatures: -40
More informationUHP-350 series. 350W Slim Type with PFC Switching Power Supply
Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 2000000000 50W Slim Type with PFC Switching Power Supply GB494 UL950-1 EN950-1 EN5-1 IEC950-1 - ~ Industrial automation machinery Industrial
More informationGB60S 60W Single Output General Purpose Series
Features 2 x 3 x 1.0 Package Operates to 80 C Ambient For 1U Applications 60W convection cooled Universal Input 90-264Vac Optional Power ON LED Approved to CSA/EN/IEC/UL60950-1, 2 nd Edition Efficiency
More informationIS 15885(Part 2/Sec13) R ( for 24V only)
THOMAS SAMUEL THOMAS SAMUEL Bauar t gepruft Sicherheit egel ma ge od o s be wac g W Constant Voltage + Constant Current LED Driver 110 M IP67 Features Constant Voltage + Constant Current mode output Plastic
More informationOperating temperature (2, 3, 5) C -20 C to +70 C ( see derating curves) Storage temperature C -40 C to +85 C
www.uk.tdk-lambda.com/drb 15W to 100W Single Output DIN Rail Mount Power Supplies Features Compact Footprint Efficiency up 91% ErP Compliant Design Benefits Saves Space on Rail & Cabinet Cost Cooler Applications
More informationUHP-500 series. 500W Slim Type with PFC Switching Supply
Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 2000000000 500W Slim Type with PFC Switching Supply S&E GB4943 UL950- EN950- IEC950- % - ~+ Industrial automation machinery Industrial
More informationD R C- 4 0 s e r i e s
LPS Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 2000000000 Features Universal AC input / Full range Protections: Short circuit / Overload / Over voltage Battery low protection /
More informationOutput Current Input Current Over Load VDC VDC ma ma(typ.) ma(typ.) VDC μf %
Doc. EC-0093 FEATURES Industrial Standard 2"x1" Package Ultra-wide Input Range 9-36VDC, 18-75VDC, 40-160VDC I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp. Range -40 C to +88 C
More informationECP180 Series. Low 1 Profile. High Power Density. 2.0 by 4.0 Footprint. 120W Convection-cooled Rating. 180W Force Cooled Rating
ECP180 Series Low 1 Profile High Power Density 2.0 by 4.0 Footprint 120W Convection-cooled Rating 180W Force Cooled Rating Medical & ITE pprovals Class I and Class II pplications High Efficiency, up to
More informationSwitching Power Supplies
, 18 150 Watt Features Compact boxed power supplies with screw terminal block Universal input 85-264 VAC, 50/60 Hz Short circuit and overvoltage protection High efficiency International safety approvals
More informationPOWER-WIN TECHNOLOGY CORP.
FEATURES Medical 60601-1 3.1 rd Edition approved U-Channel, End fan and Top fan types available Optional high efficiency OR-ing FET diode Current share function 2 year warranty ELECTRICAL SPECIFICATIONS
More informationUCS-CHR24V55W. Combined Power Supply & Battery Charger. Data Sheet
Combined Power Supply & Battery Charger Data Sheet INTRODUCTION UCS-CHR24V55W is a combined charger and power supply with dedicated outputs for both charging and power supply. With a large input range
More informationFeatures. LED Driver. RACT09 9 Watt. TRIAC Dimmable. Single Output RACT09- AC/DC Converter
Features TRIAC Dimmable LED Driver Triac dimmable with leading or trailing edge dimmers Class II with SELV output (no earth required) Extra-large screw terminals and integrated cable clamps for easy installation
More informationZWD100PAF Series Instruction Manual
Instruction Manual BEFORE USING THE POWER SUPPLY UNIT Pay attention to all warnings and cautions before using the unit. Incorrect usage could lead to an electrical shock, damage to the unit or a fire hazard.
More informationZWD225PAF Series Instruction Manual
Instruction Manual BEFORE USING THE POWER SUPPLY UNIT Pay attention to all warnings and cautions before using the unit. Incorrect usage could lead to an electrical shock, damage to the unit or a fire hazard.
More informationTRC ELECTRONICS, INC DC/DC Converter SIP Package 6W MEAN WELL SPBW06 & DPBW06 Series
/,, MODEL SELECTION TABLE INPUT ORDER NO. INPUT VOLTAGE (RANGE) NO LOAD INPUT CURRENT FULL LOAD VOLTAGE CURRENT EFFICIENCY (TYP.) CAPACITOR LOAD (MAX.) SPBW06F-03 310mA 3.3V 0 ~ 1500mA 81% 4700μF SPBW06F-05
More informationPOWER-WIN TECHNOLOGY CORP.
atts Dual to Quad Output FEATURES Build-in active PFC function, PF > 0.9 Compact design for multiple outputs Dual to Quad output, Flexible DC output combination from 3.3V to 48V 2 year warranty ELECTRICAL
More informationLS200 Series Instruction Manual
LS200 Series Instruction Manual BEFORE USING THE POWER SUPPLY UNIT Pay attention to all warnings and cautions before using the unit. Incorrect usage may lead to an electrical shock, damage to the unit
More informationDIN Rail Power Supplies
DIN Rail Power Supplies Since 1984, Altech Corporation has grown to become a leading supplier of automation and industrial control components. Headquartered in Flemington, NJ, Altech has an experienced
More informationSwitching Power Supplies
Features Boxed Power Supplies with Screw Terminal Block Single- and Triple Output Models EMI Compliance with EN 55022 and FCC Part 15, Level B Short Cirquit Protection Overvoltage Protection High Efficiency
More informationOutput Current Input Current Reflected Ripple. Efficiency (typ.) (Range) VDC VDC ma ma(typ.) ma(typ.) ma(typ.) VDC μf % MTQZ50-72S05
Doc. EC-0094 FEATURES Industrial Standard Quarter Brick Package Wide Input Range 43-101VDC & 66-1VDC Excellent Efficiency up to 92% I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp.
More informationInput voltage Power rating Output voltage Output current With Front mounting Bracket. With DIN-rail mounting Bracket 400/480 VAC
Three-phase Input Switch Mode S8PE DIN-rail mounting, 3-phase input Switch mode Supply with a range of 5A to 40A output current 3 phase 400/480 or 200/230 VAC input 5, 10, 20 and 40A; 24 VDC output Higher
More informationTest Report: UHP
Test Report: UHP-500-36 500W Slim Type with PFC Switching Supply DESIGN VERIFY TEST Output Function Test Input Function Test Protection Function Test Component Stress Test SAFETY & E.M.C. TEST Safety Test
More informationPRODUCT SPECIFICATION File: EA-520H1U-01 Date: Apr., 7, 2005
SWITCHING POWER SUPPLY Page: 1 of 1 1. SCOPE 2 2. AC INPUT 2 3. DC OUTPUT 2 3.1 VOLTAGE and CURRENT LOAD RANGES 2 3.2 OUTPUT RIPPLE and NOISE 3 3.3 DYNAMIC DC OUTPUT CHARACTERISTICS 3 3.4 DC OUTPUT ON/OFF
More informationSwitching Power Supply
Switching Power Supply Easy-to-use Industrial Power Supply with Versatile Functions (); Power Supply Suitable for Peak Loads such as Motors and Solenoids (-P) Remote control function incorporated. Remote
More informationOrdering Information. Switching Power Supply S82F. Industrial-Grade Power Supply for General or Peak Load Applications SWITCHING POWER SUPPLIES
Switching Power Supply S82F Industrial-Grade Power Supply for General or Peak Load Applications Correct input voltage range is automatically selected: 1 VAC or 2 VAC. Model S82F-P is suitable for peak
More informationRUZ- _/_ Protection (3) Isolation Option (4)
Features Unregulated Converters Description Dual output from a single input rail 1kVDC or 2kVDC input/output basic isolation 1kVDC output/output isolation Power sharing on outputs Optional continuous short
More informationAdvanced Battery Charger. 3 - stage charging capability (IUOU) 4.1 A / 100VAC 1.8A / 240VAC
Cxx Features: Universal AC input with active PFC Compatible with Lead Acid, Li-ion, Gel and AGM batteries Support optional remote controller (CR-) Voltage / temperature compensation with battery temp.
More information*Last time buy date of PAH200H: Mar. 29, *Last time buy date of PAH50S, 75S, 100S, 150S, 200S: Dec. 2, PAH450S PAH75D
*Last time buy date of 200H: Mar. 29, 2019. *Last time buy date of 50S, 75S, 100S, 150S, 200S: Dec. 2, 2019. SERIES Single / Dual Output 50-450W 200H 200S 300S 350S 450S 75D 2 75D 100S 150S 75S Features
More information60W Constant Current Mode LED Driver. HBG-60 series. File Name:HBG-60-SPEC
05 SPECIFICATION MODEL OUTPUT INPUT RATED CURRENT RATED POWER CONSTANT CURRENT REGION OPEN CIRCUIT VOLTAGE(max.) CURRENT ADJ. RANGE CURRENT RIPPLE CURRENT TOLERANCE SET UP TIME VOLTAGE RANGE FREQUENCY
More informationSpecifications 2019-V AC-DC Din Rail Mounted Power Supply IS-480 Series, 480W
2019-V1.0-0118 Specifications AC-DC Din Rail Mounted Power Supply IS-480 Series, 480W No. 545 Museum Road Yangzhou, Jiangsu China 225009 Tel: 86 (514) 8279 1592 Fax: 86 (514) 8769 3159 2019 AC-DC Din Rail
More informationLoad (2) Single or Dual
Features Regulated Converter Reinforced insulation for 25VAC working voltage Clearance and creepage distance >8.mm 5kVAC I/P to O/P 2MOPP isolation 2µA patient leakage current Industry standard pinout
More informationPRODUCT SPECIFICATION File: EA-250U1C-10 Date: May, 25, 2005
SWITCHING POWER SUPPLY Page: 1 of 5 1. SCOPE 2 2. AC INPUT and AC OUTPUT 2 3. DC OUTPUT CURRENT LOAD RANGES 2 3.1 DYNAMIC DC OUTPUT CHARACTERISTICS 2 3.2 DC OUTPUT ON/OFF CONTROL 2 3.3 OUTPUT RIPPLE and
More informationPH-A 280 Series. 50W to 300W DC-DC Converters, Single Output High Density Power Modules. PH-A 280 Series 1. Specification
PH-A 280 Series www.uk.tdk-lambda.com/ph-a 50W to 300W DC-DC Converters, Single Output High Density Power Modules Features High Density Up to 425 Vdc Input Fixed Operating Frequency High Efficiency Certified
More informationOpen Frame Power Supplies
, 0 300 Watt Features Small and compact PCB Construction Optional with Chassis and Cover Universal Input 8 264 VAC, Output Voltage adjustable Compliance to E 6000-3-2 (PFC) EMI meets E022, Class B and
More informationPRODUCT SPECIFICATION File: EA-400H2U-02 Date: Feb., 16, 2005
SWITCHING POWER SUPPLY Page: 1 of 1 1. SCOPE 2 2. AC INPUT 2 3. DC OUTPUT 2 3.1 VOLTAGE and CURRENT LOAD RANGES 2 3.2 CROSS REGULATION 2 3.3 OUTPUT RIPPLE and NOISE 3 3.4 DYNAMIC DC OUTPUT CHARACTERISTICS
More informationInstruction Manual PFE500F 1000F SERIES. TDK-Lambda PFE500F 1000F Series INSTRUCTION MANUAL
PFE500F 1000F SERIES Instruction Manual BEFORE USING THE POWER SUPPLY UNIT Be sure to read this instruction manual thoroughly before using this product. Pay attention to all cautions and warnings before
More informationOutput Current Input Current Reflected Ripple. VDC VDC ma ma(typ.) ma(typ.) ma(typ.) VDC μf %
FEATURES Industrial Standard Quarter Brick Package Wide Input Range 43-101VDC & 66-1VDC Excellent Efficiency up to 92% I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp. Range - C
More informationPRODUCT SPECIFICATION File: EA- 400ET1-10 Date: Jul., 28, 2006
SWITCHING POWER SUPPLY Page: 1 of 5 1. SCOPE 2 2. AC INPUT 2 3. DC OUTPUT 2 3.1 VOLTAGE and CURRENT LOAD RANGES 2 3.2 CROSS REGULATION 2 3.3 OUTPUT RIPPLE and NOISE 3 3.4 DYNAMIC DC OUTPUT CHARACTERISTICS
More informationAdvanced Battery Charger 0 ~ 15A 0 ~ 25A 0 ~ 35A 0 ~ 50A 0 ~ 80A. 3 - stage charging capability (IUOU) 90 ~ 264VAC (refer to de-rating curve)
Cxx Features: Universal AC input with active PFC Compatible with Lead Acid, Li-ion, Gel and AGM batteries Support optional remote controller (CR-) Voltage / temperature compensation with battery temp.
More informationMJWI20 SERIES FEATURES PRODUCT OVERVIEW. DC/DC Converter 20W, Highest Power Density MINMAX MJWI20 Series
DC/DC 2W, Highest Power Density MINMAX MJWI2 Series MJWI2 SERIES DC/DC CONVERTER 2W, Highest Power Density FEATURES Smallest Encapsulated 2W! Package Size 1. x1. x.4 Ultra-wide 4:1 Input Range Very high
More informationSorensen XG 1700 Series 1700 W A Watt, 1U Programmable DC Power Supplies V. Key Features. Key Modes
Sorensen XG 1700 Series 1700 W 1700 Watt, 1U Programmable DC Power Supplies 6 600 V Industry Leading Power Density Up to 1700 Watts in 1U Standard Digital Interfaces USB&RS232/485 LXI Ethernet and Isolated
More informationIndustrial Power Supplies
, Features Switch Mode Power Supplies for DIN-rail Mounting 6 Power Ranges with 2, 3, 6, 12, 20 and 24 A Current (24 VDC Models) Selectable 115/ 230 VAC Input Very low Ripple and Noise EMI complies with
More informationMODEL LEP100F-24 LEP100F-36 LEP100F-48 DC OUTPUT +24V 4.2(Peak 7)A +36V 2.8(Peak 4.7)A +48V 2.1(Peak 3.5)A
AC-DC Power Supplies Open Frame/ Enclosed type 00F Ordering information 00 F -2 -O 2 3 R Recommended EMI/EMC Filter NAC-06-72 High voltage pulse noise type : NAP series Low leakage current type : NAM series
More informationInput surge voltage (max 3 seconds) 24V Nom : 50VDC 48V Nom: 100VDC
www.emea.tdk-lambda.com/pxc-m Single and Dual Output 6W DC-DC Converters Features 60601-1 approval I/O isolation 5kVAC, 2MOPP 0.25µA low patient leakage 4:1 Wide input range Benefits Easier system approval
More informationPanel Model Adjust Adjust Power 5Hz-1MHz 20MHz BW 5Hz-1MHz % Output Jacks Range Range (W) (mv) (mv) (ma) ( VAC) (Option)
Z+ Series Features 2U high uilt-in US, RS232 & RS485 Optional LN, GPI & isolated analogue programming interfaces Outputs up to 650Vdc rbitrary function generation 5 year warranty Minimises system rack
More informationZ+ Series. 200W, 400W, 600W and 800W Programmable DC Power Supplies. Z+ Series 1. Model Selector. Minimises system rack height
Z+ Series www.uk.tdk-lambda.com/zplus Features 2U high uilt-in US, RS232 & RS485 Optional LAN, GPI & isolated analogue programming interfaces Outputs up to 650Vdc Arbitrary function generation 5 year warranty
More informationPRODUCT SPECIFICATION File: EA-600ETF-C10 Date: Mar. 29, 2010
SWITCHING POWER SUPPLY Full Range Rev.:C1.0 Page: 1 of 5 1. SCOPE 2 2. AC INPUT 2 3. DC OUTPUT 2 3.1 VOLTAGE and CURRENT LOAD RANGES 2 3.2 CROSS REGULATION 2 3.3 OUTPUT RIPPLE and NOISE 3 3.4 DYNAMIC DC
More informationPFC Function / Metal Case PFC Function / Plastic Case Plastic Case. PCB Type
60 30 30 18 30 ~ 240W ~ 96 W ~ 60 W ~ 60 W ~ 60 W CLG PLN ELN LP PLP series series series series series - PFC Function / Metal Case PFC Function / Plastic Case Plastic Case Plastic Case PCB Type About
More informationSeries AM2S-Z 2 Watt DC-DC Converter
Click on Series name for product info on aimtec.com Models Single Model Voltage (V) FEATURES: RoHSCompliant Operating Temperature - to +85 4 Pin SIP Package / Isolation and 3VDC Ultra MiniaturePackage
More informationAdvanced Battery Charger. 3 - stage charging capability (IUoU) 25A
Cxx Features: Universal AC input with active PFC Compatible with Lead Acid, Li-ion, Gel and AGM batteries Support optional remote controller (CR-) Voltage / temperature compensation with battery temp.
More information100W Single Output Switching Power Supply NO TEST ITEM SPECICATION TEST CONDITION RESULT VERDICT
MODEL:LPV-100-24 OUTPUT FUNCTION TEST 1 RIPPLE & NOISE V1: 150 mvp-p (Max ) V1: 6 mvp-p (Max ) 2 OUTPUT VOLTAGE TOLERANCE V1: -5 %~ +5 % (Max) I/P: 100VAC / 264 VAC O/P:FULL/ 0% LOAD V1: -0.36%~ +0.2 %
More informationSeries AM2F-Z 2 Watt DC-DC Converter
Click on Series name for product info on aimtec.com Models Single output Model Input FEATURES: RoHS compliant Operating temperature -25 o C to + 85 o C 12 Pin SIP Package Input / Isolation 1, 3 or 5VDC
More informationDC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS MTWA2 SERIES
DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS FEATURES 2:1 Wide Input Voltage Range: 4.5-12 Input, 9-18 and 18-36 and 36-75 5000Vac Input to Output 2MOPP Isolation Remote On/Off
More informationModel Number Output Voltage Output Amps Input Range Max. Iin FL Efficiency Max Output Power
Small 2.32 x 0.9 x 0.37 Size Constant Frequency High Typical Efficiency of 90% (12Vout) Low Output Noise 18 to 60VDC Input Voltage Range Output Over Voltage Protection Current Limit/Short Circuit Protection
More informationConducted and radiated emissions (Note 4) EN55011, EN55022, Class A and FCC part 18 Immunity (Note 5)
www.emea.tdk-lambda.com/pxc-m Single and Dual Output 3W DC-DC Converters Features 60601-1 approval I/O isolation 5kVAC, 2MOPP 0.25µA low leakage 4:1 Wide input range Benefits Easier system approval Patient
More informationOutput Current Input Current Reflected Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S033
DC/DC High Efficiency Regulated Output W Minmax MKW Series FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency
More informationDSP Series 7.5W to 100W Low Profile Din Rail Mount Power Supplies
Low Profile for Building Automation 5V to 24V Outputs Wide Range AC Input -25 C to +71 C Operation Convection Cooled UL1310 Class 2 Class II Double Insulation 7.5W to 100W Low Profile Din Rail Mount Power
More informationZMS100 Series. 80W Convection, 100W Forced-Air Cooled Single Output Power Supplies. ZMS100 Series 1. Specification (1)
www.emea.tdk-lambda.com/zms 80W Convection, 100W Forced-Air Cooled Single Output Power Supplies Features Benefits Long e-cap lifetime Better field reliability and service life Compact 2 x 4 inch footprint
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. PB-300 / 360 USER'S MANUAL SPECIFICATION : PB-300 MODEL BOOST CHARGE VOLTAGE
More informationPCB Relay. Ordering Information. Surface Mounting DPDT Relay G6S
PCB Relay Surface Mounting DPDT Relay Long terminals for ideal for soldering and mounting reliability. Space-saving inside-l terminal. High dielectric strength between coil and contacts (2,000 VAC), and
More informationNotes: Note1: values at nominal input voltage and full load. 8.5VDC 5V 8V. Open, Efficiency vs. Input Voltage. Efficiency [%]
Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Built-in EMC Filter Ribbed Case Style 22VDC Isolation Wide 4:1 Input Voltage Range EN-522 Class B The
More informationJameco SKU Number:
Jameco SKU Number: 2105842 60W Single Output with Battery Charger(US Function) SC-60 s e ries SECIFICATION MODEL OUTUT INUT ROTECTION FUNCTION ENVIRONMENT SAFETY & EMC (Note 4) OTHERS NOTE OUTUT NUMBER
More informationOutput Current Input Current Reflected Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S033
MKW SERIES DC/DC CONVERTER W, Highest Power Density FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency up to
More informationZMS100 Series. 80W Convection, 100W Forced-Air Cooled Single Output Power Supplies. ZMS100 Series 1. Specification
ZMS100 Series www.emea.tdk-lambda.com/zms 80W Convection, 100W Forced-Air Cooled Single Output Power Supplies Features Benefits Long e-cap lifetime Better field reliability and service life Compact 2 x
More informationSeries AM5T-Z 5 Watt DC-DC Converter
Click on Series name for product info on aimtec.com s Single Output FEATURES: RoHS compliant Operating temperature -40 o C to + 85 o C 24 Pin DIP Package Input / Output isolation 1500 and 3500VDC High
More informationVDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S
MKW SERIES DC/DC CONVERTER W, Highest Power Density FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency up to
More informationDRB-1 Series Instruction Manual
Instruction Manual BEFORE USING THE POWER SUPPLY UNIT Pay attention to all warnings and cautions before using the unit. Incorrect usage could lead to an electrical shock, damage to the unit or a fire hazard.
More informationDRL-1 Series Instruction Manual
DRL-1 Series Instruction Manual BEFORE USING THE POWER SUPPLY UNIT Pay attention to all warnings and cautions before using the unit. Incorrect usage could lead to an electrical shock, damage to the unit
More informationFeatures. Description. Table of Contents
Features Very low profile Very high efficiency (typically 90%) Single and dual output versions Input voltages from 24V to 110VDC nominal voltages from 5V to 48VDC -40 C to +71 C operation without de-rating
More informationTC-500PD8. Switching Power Supply ( PS2 A T X 500W 8 0+ ) SPECIFICATION. Revision: 2.0
TC-500PD8 TC-500PD8 Switching Power Supply ( PS2 A T X 500W 8 0+ ) SPECIFICATION Revision: 2.0 727,. Phillips Drive City of Industry. CA 91748. USA http:// www.xeal.com.tw TEL: 626-303-8885 FAX: 626-301-0588
More informationNote1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%]
Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Baseplate Case Style 2250VDC Isolation Wide 4:1 Input Voltage Range EN-50155 and EN-50121-3-2 Certified
More informationCUS100ME Series. 2 x 4 100W AC-DC Power Supplies. CUS100ME Series 1. Specification
CUS100ME Series www.emea.tdk-lambda.com/cus100me 2 x 4 100W C-DC Power Supplies Features enefits 100W Convection Rating Quiet Operation 75W With 1m/s irflow at 85 C mbient Suitable for High mbient Temperature
More informationPFE700SA Series Instruction Manual
Instruction Manual BEFORE USING THE POWER SUPPLY UNIT Be sure to read this instruction manual thoroughly before using this product. Pay attention to all cautions and warnings before using this product.
More informationInstruction Manual. TDK-Lambda. PFE300SA 500SA Series INSTRUCTION MANUAL
Instruction Manual TDK-Lambda BEFORE USING THE POWER SUPPLY UNIT Be sure to read this instruction manual thoroughly before using this product. Pay attention to all cautions and warnings before using this
More informationNote1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%]
Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Built-in EMC Filter Baseplate Case Style 2250VDC Isolation Wide 4:1 Input Voltage Range EN-50155 and
More informationPRO POWER 2 0 A L I T H I U M B AT T E RY C H A R G E R M O D E L : P P - L B C V E R S I O N : V 1. 0
PRO POWER 2 0 A L I T H I U M B AT T E RY C H AR G E R M O D E L : P P - L B C - 1 2 2 0 V E R S I O N : V 1. 0 Contents 1. Revised History... 1 2. Warning... 1 3. Notes... 1 4. Product Number System...
More information