LIGHT DUTY MELT-BLOWN CARTRIDGE

Size: px

Start display at page:

Download "LIGHT DUTY MELT-BLOWN CARTRIDGE"

Frederick Hopkins
5 years ago
Views:

1 FCP II Filter Cartridge Range LIGHT DUTY MELT-BLOWN CARTRIDGE FCP II series Feature-Tec s FCP II polypropylene melt-blown filter cartridges feature a four-layer construction, resulting in an asymmetric structure. This special design provides a high dirt holding capacity, longer life-time and lower initial differential pressure. Applications E-coats Developers Pre-filtration recycled water Coolants Solutions with lower viscosity Electroplating solutions Water treatment Edible oils and many more Features and benefits Excellent chemical compatibility No binders or additives Made of 1% high purity polypropylene melt-blown fibers Special four-layer structure provides low differential pressure and excellent dirt holding capacity Available in a wide variety of adapterend cap configurations According to FDA requirements title 21 (CFR ) Filter specifications Material Polypropylene melt-blown Inner core Polypropylene O-rings Gaskets Buna N, Silicone, EPDM, Viton.5, 1, 5, 1, 25, 5, 75, Dimensions Parameters 1, 2, 3, 4 (254, 58, 762, 116 mm) Outside diameter 2,48 (63 mm) Inside diameter 1.1 (28 mm) Maximum operating temperature 6 C (14 F) Max. differential pressures C ( F) C ( F) Recommended change-out pressure drop for disposal C (3.5 7 F) 1 6 C ( F) Page 231

2 FCP II Filter Cartridge Range FCP II Flow Rate (1" length)* m 5 m 5 m 75 m * For fluids with a dynamic viscosity of 1 mpa 2 C Ordering information 1: 1 (254 mm) 2: 2 (58 mm) 3: 3 (762 mm) 4: 4 (116 mm) O-rings Gaskets B: Buna N S: Silicone E: EPDM V: Viton U: None 5:.5 m 1: 5: 5 m 1: 25: 5: 5 m 75: 75 m 1: FCP II 1 7 U 1 Y Filter series FCP II: Light duty polypropylene melt-blown End configurations 2: 226 Flat, Single Open End 3: 222 Flat, Single Open End 4: 226 Fin, Single Open End 6: 222 Fin, Single Open End 7: Double Open End Core material Y: Polypropylene Blank: None Germany Wankelstraße 51 D Cologne, Germany Tel: +49 () Fax: +49 () Singapore No. 9, Kaki Bukit Road 1,#2-9, Eunos Technolink,Singapore Tel: Fax: China Part B, 15th Floor, No.1 Middle FuXing Road, Huangpu District,Shanghai, P.R. China Tel: +86 (21) Fax: +86 (21) PageProviding 2 a complete solution for your filtration needs.

FCP Filter Cartridge Range HIGH STRENGTH MELT-BLOWN CARTRIDGE FCP series Feature-Tec s FCP polypropylene melt-blown filter cartridges features a two-layer construction, resulting in an asymmetric

3 FCP Filter Cartridge Range HIGH STRENGTH MELT-BLOWN CARTRIDGE FCP series Feature-Tec s FCP polypropylene melt-blown filter cartridges features a two-layer construction, resulting in an asymmetric structure. This special design provides a high dirt holding capacity, longer life-time and lower initial differential pressure. Applications E-coats Developers Pre-filtration recycled water Coolants Solutions with lower viscosity Electroplating solutions Chemicals Water treatment Edible oils and many more Features and benefits Excellent chemical compatibility No binders or additives Made of 1% high purity polypropylene melt-blown fibers Special two-layer structure provides low differential pressure and excellent dirt holding capacity Available in a wide variety of adapterend cap configurations According to FDA requirements title 21 (CFR ) Filter specifications Material Polypropylene melt-blown Inner core Polypropylene O-rings Gaskets Buna N, Silicone, EPDM, Viton.5, 1, 3, 5, 1, 25, 5, 75, Dimensions Parameters 1, 2, 3, 4 (254, 58, 762, 116 mm) Outside diameter 2,48 (63 mm) Inside diameter 1.1 (28 mm) Maximum operating temperature 8 C (176 F) Max. differential pressures C ( F) C (29,9 14 F) C ( F) Recommended change-out pressure drop for disposal C (3.5 7 F) 1 6 C ( F) Page253

4 FCP Filter Cartridge Range FCP Flow Rate (1" length)* m 5 m 5 m 75 m * For fluids with a dynamic viscosity of 1 mpa 2 C Ordering information 1: 1 (254 mm) 2: 2 (58 mm) 3: 3 (762 mm) 4: 4 (116 mm) O-rings Gaskets B: Buna N S: Silicone E: EPDM V: Viton U: None 5:.5 m 1: 3: 3 m 5: 5 m 1: 25: 5: 5 m 75: 75 m 1: FCP 1 7 B 1 Y Filter series FCP: High strength polypropylene melt-blown End configurations 2: 226 Flat, Single Open End 3: 222 Flat, Single Open End 4: 226 Fin, Single Open End 6: 222 Fin, Single Open End 7: Double Open End Core material Y: Polypropylene Blank: None Germany Wankelstraße 51 D Cologne, Germany Tel: +49 () Fax: +49 () Singapore No. 9, Kaki Bukit Road 1,#2-9, Eunos Technolink,Singapore Tel: Fax: China Part B, 15th Floor, No.1 Middle FuXing Road, Huangpu District,Shanghai, P.R. China Tel: +86 (21) Fax: +86 (21) PageProviding 4 a complete solution for your filtration needs.

5 FBM Filter Cartridge Range ABSOLUTE PRECISION MELT-BLOWN CARTRIDGE FBM series Feature-Tec s FBM polypropylene melt-blown filter cartridges feature a two-layer construction, resulting in an asymmetric structure. This special design provides a high dirt holding capacity, longer life-time and lower initial differential pressure. Applications E-coats Coolants Solutions with lower viscosity CMP slurries Purified water pre-filtration Recycled water pre-filtration Plant cooling water (PCW) in semiconductor industry Water treatment Industrial paints and many more Features and benefits Excellent chemical compatibility No binders or additives Made of 1% high purity polypropylene melt-blown fibers Removal ratings up to 99.9% Special two-layer structure provides low differential pressure and excellent dirt holding capacity Available in a wide variety of adapterend cap configurations Filter specifications Material Polypropylene melt-blown Inner core Polypropylene O-rings Gaskets Buna N, Silicone, EPDM, Viton.5, 1, 3, 5, 1, 25, 5, 75, Dimensions Parameters 1, 2, 3, 4 (254, 58, 762, 116 mm) Outside diameter 2,48 (63 mm) Inside diameter 1.1 (28 mm) Maximum operating temperature 93 C (2 F) with core Max. differential pressures C ( F) C (29,9 14 F) C ( F) Recommended change-out pressure drop for disposal 3 21 C ( F) 1 8 C ( F) Page275

6 FBM Filter Cartridge Range FBM Flow Rate (1" length)* m 5 m 75 m * For fluids with a dynamic viscosity of 1 mpa 2 C FBM Filter Efficiency Removal ratings ( m) D Efficiency (%) Ordering information 1: 1 (254 mm) 2: 2 (58 mm) 3: 3 (762 mm) 4: 4 (116 mm) O-rings Gaskets B: Buna N S: Silicone E: EPDM V: Viton U: None 5:.5 m 1: 3: 3 m 5: 5 m 1: 25: 5: 5 m 75: 75 m 1: FBM 1 7 B 1 Y Filter series FBM: Absolute precision polypropylene melt-blown End configurations 2: 226 Flat, Single Open End 3: 222 Flat, Single Open End 4: 226 Fin, Single Open End 6: 222 Fin, Single Open End 7: Double Open End Core material Y: Polypropylene Blank: None Germany Wankelstraße 51 D Cologne, Germany Tel: +49 () Fax: +49 () Singapore No. 9, Kaki Bukit Road 1,#2-9, Eunos Technolink,Singapore Tel: Fax: China Part B, 15th Floor, No.1 Middle FuXing Road, Huangpu District,Shanghai, P.R. China Tel: +86 (21) Fax: +86 (21) Page 6 28 Providing a complete solution for your filtration needs.

FCN Filter Cartridge Range NYLON MELT-BLOWN CARTRIDGE FCN series Feature-Tec s FCN nylon meltblown filter cartridges provides filtration characteristics that are more consistent than melt-blown

7 FCN Filter Cartridge Range NYLON MELT-BLOWN CARTRIDGE FCN series Feature-Tec s FCN nylon meltblown filter cartridges provides filtration characteristics that are more consistent than melt-blown polypropylene filter cartridges. They are suitable for applications with higher temperatures and perfect for special solvent filtration. Applications Vapor degreasing Solvents Amine Clarification of kerosene, gasoline and diesel Paints & varnishes Lacquers Hydraulic oils E-coat Liquid propane gas (LPG) High temperature fluids Emulsions and many more Features and benefits Excellent chemical and thermal compatibility No binders or additives High void volume provides low differential pressure and excellent dirt holding capacity Excellent for applications with temperatures up to 125 C Available in a wide variety of adapterend cap configurations Graded density for maximum dirt holding capacity According to FDA requirements title 21 (CFR ) Filter specifications Material Nylon 6 melt-blown Inner core Nylon 6 O-rings Gaskets Buna N, Silicone, EPDM, Viton 1, 5, 1, 25, 5, 75, Dimensions Parameters 1, 2, 3, 4 (254, 58, 762, 116 mm) Outside diameter 2,48 (63 mm) Inside diameter 1.1 (28 mm) Maximum operating temperature 125 C (257 F) Max. differential pressures Without nylon core 1 : C ( F) 5 : C ( F) Recommended change-out pressure drop for disposal With nylon core C (5.8 7 F) C ( F) Page297

8 FCN Filter Cartridge Ran FCN Flow Rate (1" length)* m 5 m 75 m * For fluids with a dynamic viscosity of 1 mpa 2 C FCN Filter Efficiency (%) Removal ratings ( m) um 5um 1um 25um 5um 75um 1um Filtration Efficiency (%) Ordering information 1: 1 (254 mm) 2: 2 (58 mm) 3: 3 (762 mm) 4: 4 (116 mm) O-rings Gaskets B: Buna N S: Silicone E: EPDM V: Viton U: None 1: 5: 5 m 1: 25: 25 m 5: 5 m 75: 75 m 1: FCN 1 7 B 1 Y Filter series FCN: Nylon 6 melt-blown End configurations 2: 226 Flat, Single Open End 3: 222 Flat, Single Open End 4: 226 Fin, Single Open End 6: 222 Fin, Single Open End 7: Double Open End Core material Y: nylon Blank: None Germany Wankelstraße 51 D Cologne, Germany Tel: +49 () Fax: +49 () Singapore No. 9, Kaki Bukit Road 1,#2-9, Eunos Technolink,Singapore Tel: Fax: China Part B, 15th Floor, No.1 Middle FuXing Road, Huangpu District,Shanghai, P.R. China Tel: +86 (21) Fax: +86 (21) Page 3 Providing 8 a complete solution for your filtration needs.

9 FCE Filter Cartridge Range POLYESTER MELT-BLOWN CARTRIDGE FCE series Feature-Tec s FCE polyester meltblown filter cartridges provides filtration characteristics that are more consistent than melt-blown polypropylene filter cartridges. They are suitable for applications with higher temperatures and perfect for petrochemical solvent filtration. Applications Acid solutions Paints Inks Resins Petrochemicals Solvents Food and beverages Edible oil and many more Features and benefits Excellent chemical and thermal compatibility No binders or additives High void volume provides low differential pressure and excellent dirt holding capacity Excellent for applications with temperatures up to 12 C Graded density for maximum dirt holding capacity Available in a wide variety of adapterend cap configurations Filter specifications Material Polyester melt-blown Inner core Polyester O-rings Gaskets Buna N, Silicone, EPDM, Viton 1, 5, 1, 25, 5, 75, Dimensions Parameters 1, 2, 3, 4 (254, 58, 762, 116 mm) Outside diameter 2,48 (63 mm) Inside diameter 1.1 (28 mm) Maximum operating temperature 12 C (248 F) Max. differential pressure drop for disposal C ( F) Page 31 9

10 FCE Filter Cartridge Range FCE Flow Rate (1" length)* FCE Filter Efficiency m 5 m * For fluids with a dynamic viscosity of 1 mpa 2 C Ordering information 1: 1 (254 mm) 2: 2 (58 mm) 3: 3 (762 mm) 4: 4 (116 mm) O-rings Gaskets B: Buna N S: Silicone E: EPDM V: Viton U: None 1: 5: 5 m 1: 25: 25 m 5: 5 m 75: 75 m 1: FCE 1 7 B 1 Y Filter series FCE: Polyester melt-blown End configurations 2: 226 Flat, Single Open End 3: 222 Flat, Single Open End 4: 226 Fin, Single Open End 6: 222 Fin, Single Open End 7: Double Open End Core material Y: polyester Blank: None Germany Wankelstraße 51 D Cologne, Germany Tel: +49 () Fax: +49 () Singapore No. 9, Kaki Bukit Road 1,#2-9, Eunos Technolink,Singapore Tel: Fax: China Part B, 15th Floor, No.1 Middle FuXing Road, Huangpu District,Shanghai, P.R. China Tel: +86 (21) Fax: +86 (21) PageProviding 1 a complete solution for your filtration needs.

SPUN (MELT-BLOWN) POLYPROPYLENE MICRON FILTER CARTRIDGE

SPUN (MELT-BLOWN) POLYPROPYLENE MICRON FILTER CARTRIDGE Description: Spun Filter Cartridge with inner supporting Polypropylene Core is the latest development in nominal rated filter cartridge, giving longer