Test Report. No. SHAEC Date: 15 Jul Page 1 of 5.

Transcription

1 Test Report. No. SHAEC Date: 15 Jul Page 1 of 5. Taian Fibtex Trade Co., Ltd.. Rm.1701,Tianlong International Bldg., 96 Great Wall Rd., Tai`an City, Shandong , China.. The following sample(s) was/were submitted and identified on behalf of the clients as : silicone baking mat. SGS Job No. : SP SH. Date of Sample Received :. 01 Jul Testing Period :. 01 Jul Jul Test Requested :. Selected test(s) as requested by client.. Test Method :. Test Results :. Please refer to next page(s).. Please refer to next page(s).. Signed for and on behalf of SGSCSTC Standards Technical Services (Shanghai) Co., Ltd.. Marry Ma. Approved Signatory... The results shown in this test report refer only to the sample(s) tested and for clients internal use only. This test report couldn t be used as social justice purpose.

2 Test Report. No. SHAEC Date: 15 Jul Page 2 of 5. Test Results :. Test Part Description :. Specimen No.. SGS Sample ID. Description. Material (claimed by the client). SN1. SHA Transparent silicone rubber with brown fiberglass fabric. silicone coated fiberglass fabric. Remarks : (1) mg/dm² = milligram per square decimeter (2) mg/kg = milligram per kilogram (3) = degree Celsius (4) < = less than (5) MDL = Method Detection Limit (6) ND = Not Detected ( < MDL) Extractable component. (LFGB), Section 30 and 31 with amendments and BfR recommendation, to determine extractable component.. Test Method :. With reference to 61 Mitteilung über die Untersuchung von Kunststoffen, Bundesgesundheitsbl 46 (2003) 362. Simulant Used. Time. Temperature. Max. Permissible Limit. Result of 001 Extactives Deionized water.. 4.0hr(s) % (w/w). <0.1% (w/w).. PASS.. 10% Ethanol.. 4.0hr(s) % (w/w). <0.1% (w/w).. PASS.. 3% Acetic Acid.. 4.0hr(s) % (w/w). <0.1% (w/w).. PASS.. (1) Test condition & simulant were specified by client. Sensorial examination odour and taste test. (LFGB), Section 30 and 31 with amendments, to determine sensorial examination odour and taste..

3 Test Report. No. SHAEC Date: 15 Jul Page 3 of 5. Test Method :. With reference to DIN 10955:2004. Test media: Deionized water; No.of panelist: 6. Test Item(s). Limit. Test time (hr(s)). 4. Temperature( ) Sensorial examination odour (Point scale) Sensorial examination taste (Point scale) Scale evaluation: 0 no perceptible difference 1 just perceptible difference 2 slight difference 3 marked difference 4 strong difference. Colour release. (LFGB), Section 30 and 31 with amendments, to determine colour release.. Test Method :. With reference to Kunststoffe im Lebensmittelverkehr, Part B II IX.. Test Item(s). Limit. Colour release in 2% acetic acid (W/W) aqueous solution.. Negative. PASS. (1) = No colour release. (2) Negative = No color release observed, Positive = Color release observed.. Lead(Pb) and Cadmium(Cd). (LFGB), Section 30 and 31 with amendments and BfR recommendation, to determine lead (Pb) and cadmium (Cd).. Test Method :. Total lead and cadmium: Acidic digestion, analysis was performed by ICPOES..

4 Test Report. No. SHAEC Date: 15 Jul Page 4 of 5. Total Lead.. 2 ND Total Cadmium.. 2 ND (1) = Absent. Volatile organic matter. (LFGB), Section 30 and 31 with amendments and BfR recommendation, to determine volatile organic matter (VOM).. Test Method :. With reference to 61. Mitteilung über die Untersuchung von Kunststoffen, Bundesgesundheitsbl 46(2003)362 Test condition : 200, 4.0 hours. Volatile organic matter (VOM) % (w/w) PASS Polycyclic aromatic hydrocarbons (PAHs). (LFGB), Section 30 and 31 with amendments and BfR recommendations, to determine Polycyclic aromatic hydrocarbons (PAHs).. Test Method :. With reference to AfPS GS 2014:01 PAK, analysis was performed by GCMS.. Sum of 18 PAHs. 1. Sum of Acenaphthylene, Acenaphthene, Fluorene, Phenanthrene, Pyrene, Anthracene, Fluoranthene. Naphthalene(NAP). Acenaphthylene(ANY). Acenaphthene(ANA). Fluorene(FLU). Phenanthrene(PHE)

5 Test Report. No. SHAEC Date: 15 Jul Page 5 of 5. Anthracene(ANT). Fluoranthene(FLT). Pyrene(PYR). Benzo(a)anthracene(BaA). Chrysene(CHR). Benzo(b)fluoranthene(BbF) and Benzo(j)fluoranthene(BjF). Benzo(k)fluoranthene(BkF). Benzo(a)pyrene(BaP). Benzo(e)pyrene(BeP). Indeno(1,2,3c,d)pyrene(IPY). Dibenzo(a,h)anthracene(DBA). Benzo(g,h,i)perylene(BPE). Sample photo:. SHAEC SHA SGS authenticate the photo on original report only. *** End of Report ***.