Research in Department of Mechanical Engineering. Prince of Songkla University
|
|
- Deborah Fields
- 5 years ago
- Views:
Transcription
1 Research in Department of Mechanical Engineering Prince of Songkla University
2 Research in Dept. of ME, PSU Renewable Energy Energy Management and Conservation in Building Thermal-Fluids, Aerosol Mechanics Rubber Mechanics Mechatronics and Applied Mechanics
3 Research on Renewable Energy Biodiesel production Solar thermal dryer/ Solar-Biomass hybrid dryer Biomass combustion 3
4 Research on Biodiesel Development of new biodiesel production system for reducing biodiesel processing time (Batch/Continuous processes) Testing of biodiesel oil on modern diesel engine 1 Palm fruits MCPO Pretreated oil Crude biodiesel 4
5 Research on Biodiesel 100-litre biodiesel production system from crude palm oil via two-stage process Continuous biodiesel production from crude palm oil by using ultrasonic/ static mixer 5
6 Research on drying Development of a solar-biomass hybrid dryer for agricultural products Screw dryer for palm fruit drying using combined microwave heating and hot-air 6
7 Design energy efficient smoking room for rubber sheet drying using CFD technique Development of energy efficient furnace for biomass combustion
8 Research on biomass combustion Fluidized bed combustion for biomass pellet fuel Gasification burner
9 Research on Energy Conservation and Energy Management in Building Energy saving home/ low energy house Reduce the load of air conditioning
10 Research on Energy Conservation and Energy Management in Building Study of the solar collector for hot water generation system Applications of solid desiccant for dehumidification Parametric study for thermal comfort through the use of radiant cooling system
11 Research on Thermal-Fluid Mechanics Heat Transfer and Cooling in Gas Turbine Rib turbulators in rotating serpentine channel W H Jet impingement in confined channel 11
12 0 Research on Thermal-Fluid Mechanics Flow control for Impinging Jet using Special Nozzles Annular nozzle d = 12.7 mm Radial nozzle d = 12.7 mm Nusselt number on impingement surface D = 25.6 mm D = 28.6 mm D = 28.6 mm Pipe Pipe Rod 15 mm H z H z z H x Impingement plate x Impingement plate Flow patterns x Impingement plate 12
13 Jet impingement dryer 13
14 Research on Thermal-Fluid Mechanics Heat Transfer enhancement on a Surface with Rib/Pin/BaffleTurbulators Pulse Jet Combustion for Hot Air Jet Generator Modified Ribs Nussult number on wall with oblique pins Pulse jet combustion Flow patterns pass modified ribs 14
15 Research on Fluid Mechanics/ Aerosol CFD and Experimental Study of a Cyclone-Filter Aerosol Collector Development of an Electrostatic Precipitator for Collection of Particles from Rubber Wood Combustion 15
16 Research on Rubber Mechanics Medical and Healthcare Products from Natural Rubber Materials Development and Design of Hip Protector Materials Development and Design of Heel Cushion for Reducing Plantar Heel Pressure Design of Supporting Pad Fabricated from Natural Rubber for Back Support Belt 16
17 Research on Rubber Mechanics Vehicle Tires with Natural Rubber Develop to Inflated Tire Inserting Natural Rubber Foam Finite Element Analysis of Heat Generate in Integral Solid Tire Decreasing of Heat Build Up in Integral Solid Tire Develop of Solid Tire to Decrease Rolling Resistance by Finite Element Method 17
18 Research on Mechatronics and Applied Mechanics Basic and Applied Research for Piezoelectric Actuators Ultrasonic Motor Hard Disk Drive Head Biomedical Devices Bite Sensor Artificial Foot 18
19 Research on Mechatronics and Applied Mechanics Low Energy Ultrasonic Motor for Linear Translation
20 Research on Mechatronics and Applied Mechanics Ultrasonic Motor for Curvilinear Translation
21 Research on Mechatronics and Applied Mechanics Validation of the Finite Element Model of the Piezoelectric Head Gimbal Assembly System for Vibration Analysis
22 Research on Mechatronics and Applied Mechanics Position Control of the Dual-State Hard Disk Drive Head
23 Research on Mechatronics and Applied Mechanics Biomedical application
24 Research on Mechatronics and Applied Mechanics Movement Control System in the Artificial Foot
25 Academic Collaborations The Joint Graduate School of Energy and Environmental (JGSEE), King Mongkut s Technology University Thonburi, Bangkok National Metal and Materials Technology Center,Thailand University of Novi Sad (UNS), Serbia ENERTEAM, Vietnam Universiti Malaysia Perlis ENERTEAM 25
P. MANARA, D. ROVAS, A. ZABANIOTOY
SYMBIOSIS International Conference 2014, 19-21 June 2014, Athens INDUSTRIAL SYMBIOSIS OF BIODIESEL PLANTS AND AGRICULTURAL BIOMASS BASED ENERGY PLANTS VIA CO-GASIFICATION OF CRUDE GLYCEROL WASTE STREAMS
More informationMECHANICAL ENGINEERING (School of Mechanical Sciences) AGENDA NOTES Submitted to ACADEMIC COUNCIL. (09 January 2016)
MECHANICAL ENGINEERING (School of Mechanical Sciences) AGENDA NOTES Submitted to ACADEMIC COUNCIL (09 January 2016) Sl. No. Table ME- 1 B.Tech. (Mechanical Engineering) - 2015 Batch onwards Code COURSE
More informationFriday Midterm EXAMINATION Fall 2018 CREDIT HOURS ENGINEERING PROGRAMS AIN SHAMS UNIVERSITY FACULTY OF ENGINEERING
HUM311 Engineering Management 176 HUMN362 Engineering Management 1 14:00 16:00 224, 261 CEP 011 Engineering Drawing (2) 247 14:00 16:00 901, 901A, 902A, 902B,904, 250 Friday 9-11-2018 PHM022 Waves, Electricity,
More informationStaged combustion concept for increased operational flexibility of gas turbines
Staged combustion concept for increased operational flexibility of gas turbines Dieter Winkler, Antony Marrella, Janine Bochsler, Geoffrey Engelbrecht, Timothy Griffin, Peter Stuber Tagung Verbrennungsforschung,
More informationReceived 13 October 2010; revised 23 January 2011; accepted 28 January 2011
2 Journal of Scientific & Industrial Research J SCI IND RES VOL 7 MARCH 11 Vol. 7, March 11, pp. 2-224 Effects of advanced injection timing on performance and emission of a supercharged dual-fuel diesel
More informationAsian Journal on Energy and Environment ISSN Available online at
As. J. Energy Env. 2006, 7(03), 336-346 Asian Journal on Energy and Environment ISSN 1513-4121 Available online at www.asian-energy-journal.info Trans-esterification of Palm Oil in Series of Continuous
More informationNumerical Investigation of the Effect of Excess Air and Thermal Power Variation in a Liquid Fuelled Boiler
Proceedings of the World Congress on Momentum, Heat and Mass Transfer (MHMT 16) Prague, Czech Republic April 4 5, 2016 Paper No. CSP 105 DOI: 10.11159/csp16.105 Numerical Investigation of the Effect of
More informationThe Joint Graduate School of Energy and Environment, King Mongkut s University of Technology Thonburi, Bangkok, Thailand 10140
STUDY OF LIQUID ALKANES PRODUCTION FROM BIOMASS-DERIVED CARBOHYDRATES BY ALDOL-CONDENSATION AND HYDROGENATION PROCESSES Wassana Dedsuksophon 1, Verawat Champreda 2 and Navadol Laosiripojana 1 * 1 The Joint
More informationAEROSTAR SOLUTIONS OUR MOTTO
AEROSTAR SOLUTIONS AERONAUTICAL, MECHANICAL AND AUTOMOBILE PROJECTS FOR FINAL YEAR STUDENTS Aerostar solutions is one of the pioneer project centre which has been started by industrial professionals to
More informationElectric Machines I 2017 Shiraz University of Technology Dr. A. Rahideh
In The Name of God The Most Compassionate, The Most Merciful Electric Machines I Table of Contents 1. Introduction to Electric Machines 2. Electromagnetic Circuits 3. Principle of Electromechanical Energy
More informationCombustion Equipment. Combustion equipment for. Solid fuels Liquid fuels Gaseous fuels
Combustion Equipment Combustion equipment for Solid fuels Liquid fuels Gaseous fuels Combustion equipment Each fuel type has relative advantages and disadvantages. The same is true with regard to firing
More informationCordwood Technology Outlook- The 2020 Threshold and Emerging Technologies
Cordwood Technology Outlook- The 2020 Threshold and Emerging Technologies Scott Nichols Northeat Biomass Heating Expo April 2017 EPA Hydronic Heaters (aka. boilers or waterstoves that use wood fuel) overview
More informationFuel Pellets Production from Biodiesel Waste. Kawalin Chaiyaomporn and Orathai Chavalparit
EnvironmentAsia The international journal published by the Thai Society of Higher Education Institutes on Environment Available online at www.tshe.org/ea EnvironmentAsia 3(1) (2010) 103-110 Fuel Pellets
More informationNO x Emissions Control in a Fluidized-bed Combustor Fired with Rice Husk
SEE 2006: Bangkok, Thailand Least-cost NO x Emissions Control in a Fluidized-bed Combustor Fired with Rice Husk Kasama Janvijitsakul and Vladimir I. Kuprianov School of Manufacturing Systems and Mechanical
More informationAutomatic CFD optimisation of biomass combustion plants. Ali Shiehnejadhesar
Automatic CFD optimisation of biomass combustion plants Ali Shiehnejadhesar IEA Bioenergy Task 32 workshop Thursday 6 th June 2013 Contents Scope of work Methodology CFD model for biomass grate furnaces
More informationPresentation Outline
Introduction to Small-Mid Scale Commercial Biomass Boiler Systems 0.5-3.5 MMBtu/h Heating the Midwest April 25-27 th, 2012 Prepared by: David Dungate Tel: 518-956-2507 dungate@actbioenergy.com www.actbioenergy.com
More informationActive Flow Control A Tool to Improve System Efficiency
Active Flow Control A Tool to Improve System Efficiency Prof. Miki Amitay Mechanical, Aerospace and Nuclear Engineering Rensselaer Polytechnic Institute Troy, NY Special Thanks to: Florine Cannelle, Marcus
More informationHealth Relevance of Aerosols from Biomass Combustion in Comparison to Diesel Soot Indicated by Cytotoxicity Tests
Health Relevance of Aerosols from Biomass Combustion in Comparison to Diesel Soot Indicated by Cytotoxicity Tests Norbert Klippel, Thomas Nussbaumer, Michael Oser, Zurich (Switzerland), www.verenum.ch
More informationMotor Vehicle Engineering
Motor Vehicle Engineering 25 It deals with the design and maintenance of a motor vehicle and its accessories. The main courses in this stream are: IC Engine & Reciprocating Machine Motor Vehicle Engineering
More informationUdvavisk. Engineering Analysis with CFD. 1st Floor (B), Tower II, Ramana Complex #322, Velachery Main Road Velachery, Chennai
Udvavisk Engineering Analysis with CFD 1st Floor (B), Tower II, Ramana Complex # Velachery, Chennai 600042 1 Course outline 1.1 Engineering Analysis with CFD Flow and Aero-dynamic analyis around car body
More informationVedant D. Vyas 1, Dr. D. B. Jani. 2 1,2 PG research scholar (CAD/CAM) Mechanical engineering department, GEC-Dahod. IJRASET: All Rights are Reserved
CFD Simulation of Air Flow in CFBC Boiler under Different Geometry of Nozzle Grid Vedant D. Vyas 1, Dr. D. B. Jani. 2 1,2 PG research scholar (CAD/CAM) Mechanical engineering department, GEC-Dahod. Abstract:
More informationPower Electronics and Drives (PED)
Power Electronics and Drives (PED) Introduction Spurred on by technological progress and a steadily increasing concern about the efficient use of depleting energy resources, static power electronic converters
More informationNUMERICAL INVESTIGATION OF PISTON COOLING USING SINGLE CIRCULAR OIL JET IMPINGEMENT
NUMERICAL INVESTIGATION OF PISTON COOLING USING SINGLE CIRCULAR OIL JET IMPINGEMENT BALAKRISHNAN RAJU, CFD ANALYSIS ENGINEER, TATA CONSULTANCY SERVICES LTD., BANGALORE ABSTRACT Thermal loading of piston
More informationD-GASIFIER. The ultimate solution for the replacement of gaseous and liquid fuels
The ultimate solution for the replacement of gaseous and liquid fuels Cost Reduction and TOP PERFORMANCE The D-GASIFIER is an innovative equipment patented by Dynamis that allows the use of 100% solid
More informationJakapong Pongthanaisawan 1, Chumnong Sorapipatana 1 and Bundit Limmeechokchai 2
The 2nd Joint International Conference on Sustainable Energy and Environment (SEE 2006) 21-23 November 2006, Bangkok, Thailand Land Transport Demand Analysis and Energy Saving Potentials in Thailand Jakapong
More informationNUMERICAL ANALYSIS OF FLAMELESS COMBUSTION USING THE TORUS COMBUSTION CHAMBER
NUMERICAL ANALYSIS OF FLAMELESS COMBUSTION USING THE TORUS COMBUSTION CHAMBER 1 SEONG SHIN ONG, 2 YONGSON OOI, 3 KIA WAI LIEW, 4 DIRK RILLING 1,2,3 Faculty of Engineering and Technology, Multimedia University,
More informationStudy on Advanced Injection Timing on a Dual-Fuel Diesel Engine with Producer Gas from a Down-Draft Gasifier for Power Generation
Journal of Metals, Materials and Minerals, Vol.18 No.2 pp.169-173, 28 Study on Advanced Injection Timing on a Dual-Fuel Diesel Engine with Producer Gas from a Down-Draft Gasifier for Power Generation Taveesin
More informationTECHNICAL PUBLICATION
TECHNICAL PUBLICATION Efficient, Low Emissions and Fuel Flexible Today s Stoker-Fired Biomass Systems Technology by Kevin Toupin Director, Boiler Equipment Riley Power Inc. Presented at International Biomass
More informationHybrid MEMS Pneumatic Proportional Control Valve
Marquette University Milwaukee School of Engineering Purdue University University of California, Merced University of Illinois, Urbana-Champaign University of Minnesota Vanderbilt University Hybrid MEMS
More informationMicro Gas Turbine Performance Evaluation*
Micro Gas Turbine Performance Evaluation* 1 F. Oppong, 1S.J Van Der Spuy, 1T.W. Von Backstrȯm, and A. Lacina Diaby 1 Stellenbosch University, South Africa University of Mines and Technology, P.O. Box 37,
More informationENVO DIESEL TEST ON AUTOMOTIVE ENGINE AN ANALYSIS OF ITS PERFORMANCE AND EMISSIONS RESULTS
International Journal of Mechanical and Materials Engineering (IJMME), Vol. 3 (2008), No.1, 55-60. ENVO DIESEL TEST ON AUTOMOTIVE ENGINE AN ANALYSIS OF ITS PERFORMANCE AND EMISSIONS RESULTS M.A. Kalam,
More informationABSTRACT: 412 BIODIESEL FEEDSTOCKS ARE CHANGING AFFECTING THE VALUE OF THE BY-PRODUCTS
ABSTRACT: 412 BIODIESEL FEEDSTOCKS ARE CHANGING AFFECTING THE VALUE OF THE BY-PRODUCTS DU PLESSIS L M Research Consultant to Protein Research Foundation, Johannesburg, 2128, South Africa E-mail: lourensdup@kleinfontein.net
More informationInvestigation of converging slot-hole geometry for film cooling of gas turbine blades
Project Report 2010 MVK160 Heat and Mass Transport May 12, 2010, Lund, Sweden Investigation of converging slot-hole geometry for film cooling of gas turbine blades Tobias Pihlstrand Dept. of Energy Sciences,
More informationClean Energy Research Center Project Info. Jim Leidel Updated November 4, 2011
Clean Energy Research Center Project Info Jim Leidel Updated November 4, 2011 1 Oakland University Alternative Energy Education, DE-EE0003277 STATEMENT OF PROJECT OBJECTIVES - SUMMARY TASK 1.0 Subtask
More informationRTP Renewable Fuel Oil (RFO)
RTP Renewable Fuel Oil (RFO) Robert Graham, CEO Ensyn Corp Bunker and Residual Fuel Oil Conference 1 Houston June 2011 Ensyn Corporation - Overview Production of renewable fuel oils (RFO) and chemicals
More informationThe Graduate Diploma in Engineering is an AQF Level 8 qualification with a standard full-time duration of 1 year.
Graduate Diploma in Engineering (GDipE) 2015 These Program Rules should be read in conjunction with the University's policies (http://www.adelaide.edu.au/policies). Overview Graduate Diploma in Engineering
More informationCOMBUSTION EFFICIENCY
COMBUSTION EFFICIENCY Don Hunter Pr.Eng. MSc(struct)MSAICE Chief Executive Officer FFS Refiners (Pty) Ltd Durban South Africa The efficiency of a heating appliance or application is dependent on the efficiency
More informationin ultra-low NOx lean combustion grid plate
CFD predictions of aerodynamics and mixing in ultra-low NOx lean combustion grid plate flame stabilizer JOSÉ RAMÓN QUIÑONEZ ARCE, DR. ALAN BURNS, PROF. GORDON E. ANDREW S. SCHOOL OF CHEMICAL AND PROCESS
More informationVARIO. VARIO Separation of fine dust particles. The VARIO series is particularly suitable for separation of fine dust.
VARIO VARIO Separation of fine dust particles The VARIO series is particularly suitable for separation of fine dust. The VARIO units are of modular construction in order to meet different requirements,
More informationFoundations of Thermodynamics and Chemistry. 1 Introduction Preface Model-Building Simulation... 5 References...
Contents Part I Foundations of Thermodynamics and Chemistry 1 Introduction... 3 1.1 Preface.... 3 1.2 Model-Building... 3 1.3 Simulation... 5 References..... 8 2 Reciprocating Engines... 9 2.1 Energy Conversion...
More informationMultibody Dynamics Simulations with Abaqus from SIMULIA
Multibody Dynamics Simulations with Abaqus from SIMULIA 8.5.2008 Martin Kuessner Martin.KUESSNER@3ds.com Abaqus Deutschland GmbH 2 One Company, First Class Brands 3D MCAD Virtual Product Virtual Testing
More informationC C A. Combustion Components Associates, Inc.
C C A Combustion Components Associates, Inc. www.cca-inc.net About CCA CCA is a global provider of combustion control technologies to reduce NOx, particulate matter (PM), unburned carbon and CO emissions
More informationAPPLICATION OF STAR-CCM+ TO TURBOCHARGER MODELING AT BORGWARNER TURBO SYSTEMS
APPLICATION OF STAR-CCM+ TO TURBOCHARGER MODELING AT BORGWARNER TURBO SYSTEMS BorgWarner: David Grabowska 9th November 2010 CD-adapco: Dean Palfreyman Bob Reynolds Introduction This presentation will focus
More informationImprovement of combustion process of oil palm fruit fiber (Mesocarp) by adjusting of combustion air ratio between primary and secondary air
Journal of Engineering Research and Education Improvement of combustion process of oil palm fruit fiber (Mesocarp) by adjusting of combustion air ratio between primary and secondary air Ilmi Abdullah 1,
More informationATHANASIOS T. BALAFOUTIS
ATHANASIOS T. BALAFOUTIS EDUCATION 2005- Today PhD Candidate in Agricultural University of Athens Vegetable oil Use as fuel in Internal Combustion Engines 2004 School of Infantry Reserve Officers (Σ.Ε.Α.Π.)
More informationLecture 27: Principles of Burner Design
Lecture 27: Principles of Burner Design Contents: How does combustion occur? What is a burner? Mixing of air and gaseous fuel Characteristic features of jet Behavior of free (unconfined) and confined jet
More informationDESIGN OF TRANSIENT AND LIMIT CONTROLLER Chap. 5 AIRCRAFT ENGINE CONTROLS
UNIVERSITY OF SALENTO SCHOOL OF INDUSTRIAL ENGINEERING DEPT. OF ENGINEERING FOR INNOVATION Lecce-Brindisi (Italy) MASTER OF SCIENCE IN AEROSPACE ENGINEERING PROPULSION AND COMBUSTION DESIGN OF TRANSIENT
More information5. Combustion of liquid fuels. 5.1 Atomization of fuel
5. Combustion of liquid fuels 5.1 Atomization of fuel iquid fuels such as gasoline, diesel, fuel oil light, fuel oil heavy or kerosene have to be atomized and well mixed with the combustion air before
More informationSUBJECT CODES FOR VARIOUS COURSES UNDER JNTU KAKINADA
SUBJECT CODES FOR VARIOUS COURSES UNDER JNTU KAKINADA COURSE BRANCH REG YEAR SEM SUBJECT TITLE CODE CODE B.Tech 01 R10 1 1 R10111 ENGLISH PROFICIENCY B.Tech 01 R10 1 1 R10108 ENGINEERING PHYSICS AND ENGINEERING
More informationInnovation in Fluid Power. Institute for Fluid Power Drives and Controls Institut für fluidtechnische Antriebe und Steuerungen
Innovation in Fluid Power Institute for Fluid Power Drives and Controls Institut für fluidtechnische Antriebe und Steuerungen RWTH Aachen University Facts and Figures Established in 1870 9 faculties, 260
More informationRetrofitting of Mitsubishi Low NOx System
111 Retrofitting of Mitsubishi Low NOx System Susumu Sato *1 Yoshinori Kobayashi *1 Takao Hashimoto *2 Masahiko Hokano *2 Toshimitsu Ichinose *3 (MHI) has long been engaged in low NOx combustion R & D
More informationEnergy and Greenhouse Gas Implications of Biodiesel Production from Jatropha curcas L. Mr. Kritana Prueksakorn Asst. Prof. Dr. Shabbir H.
Energy and Greenhouse Gas Implications of Biodiesel Production from Jatropha curcas L. Mr. Kritana Prueksakorn Asst. Prof. Dr. Shabbir H. Gheewala* The Joint Graduate School of Energy and Environment,
More informationFACULTY PROFILE. Degree Branch / Specialization College University
FACULTY PROFILE Name Designation Email ID : S.Benjamin Franklin : Assistant Professor (Sr.Gr) : benjaminfranklin.me@srit.com Area of Specialization Total Experience : Thermal Engineering : Academic : 7
More information2. Low speed, high torque characteristics, compact size and quiet operation: 3. Compact-sized actuators:
CONTENT 1) ABSTRACT 2) INTRODUCTION 3)USM PROTOTYPES 1. Linear ultrasonic motors I) DOF planar pin-type actuator II) Bi-directional linear standing wave USM 2. Rotary ultrasonic motor 3. Spherical ultrasonic
More informationTHE SPRAY COMBUSTION OF PALM OLEIN AND DIESEL FUEL BLENDS
Jurnal Mekanikal June 2012 No 34, 47-56 THE SPRAY COMBUSTION OF PALM OLEIN AND DIESEL FUEL BLENDS Lim Xin Yi and Farid Nasir Ani * Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, 813100
More informationNovember 8, 2018 GAS TURBINE ENGINE SECONDARY FLOW SYSTEMS
November 8, 2018 GAS TURBINE ENGINE SECONDARY FLOW SYSTEMS Agenda 1 What is Secondary Flow? Purpose for the Secondary Flow Systems Chargeable Vs Nonchargeable Flows Seals Selection and Leakage Effects
More informationFlow Characteristics in an Augmentation Channel of a Direct Drive Turbine for Wave Power Generation
The 10 th Asian International Conference on Fluid Machinery 21 st 23 rd October 2009, Kuala Lumpur Malaysia Paper ID: AICFM0131 Flow Characteristics in an Augmentation Channel of a Direct Drive Turbine
More informationMECHATRONICS LAB MANUAL
MECHATRONICS LAB MANUAL T.E.(Mechanical) Sem-VI Department of Mechanical Engineering SIESGST, Nerul, Navi Mumbai LIST OF EXPERIMENTS Expt. No. Title Page No. 1. Study of basic principles of sensing and
More informationEQUIPMENT FOR FILTRATION OFAIR
EQUIPMENT FOR FILTRATION OFAIR PRESENTED BY SWAPNA.M M. Pharm 2 nd semester Department of pharmaceutics University College of Pharmaceutical Sciences, Kakatiya University, Warangal-506009. CONTENTS INTRODUCTION
More informationGUJARAT TECHNOLOGICAL UNIVERSITY BE 7th Semester Exam Scheme & Subject Code EVALUATION SCHEME
GUJARAT TECHNOLOGICAL UNIVERSITY BE 7th Semester Scheme & EVALUATION SCHEME MAX MIN MAX MIN MAX MIN MAX MIN 20 8 10 4 70 23 X 50% of X 30 12 X 50% of X NOTE : X = of the Particular. (M) 20/8 and 10/4 scheme
More informationGUJARAT TECHNOLOGICAL UNIVERSITY
GUJARAT TECHNOLOGICAL UNIVERSITY Draft Teaching Scheme : B.E. Course : (W.E.F.: 2016-2017) Aeronautical Engineering (01) Theory Marks utorial/ Practical Mark Total Branch Aircraft Design II 4 0 2 6 70
More informationBRUSH CUTTER BRUSH CUTTER MAC 43 PADDY CUTTER MAC 43
BRUSH CUTTER BRUSH CUTTER MAC 43 PADDY CUTTER MAC 43 Engine Capacity 42.7 CC Engine Capacity 42.7 CC Engine Type Single Cylinder, Two Stroke, Petrol Engine Standard Power (9000 R/Min) Cutting Width for
More informationOther actuators. Kon Mechatronic Sensors and Actuators Tapio Lantela,
Other actuators Kon-41.3140 Mechatronic Sensors and Actuators Tapio Lantela, Overview of lecture Pneumatics Linear motion with electromagnetic devices - Conversion from rotary motion - Solenoid - Voice
More informationNote: This rule is effective on July 1, 2018, through June 30, 2019.
RULE 3020 PERMIT FEE SCHEDULES (Adopted May 21, 1992; Amended July 16, 1992; Amended December 17, 1992; Amended August 21, 1997; Amended March 17, 1999; Amended June 15, 2000; Amended January 17, 2008;
More informationElectricity All Around Us
ELECTRICITY ALL AROUND US, COMPLETE MODULE MATERIALS MODULE TEST Name: Section 1: or. Circle true or false for the following questions. 1. Damaged wires can cause fires in your home. 2. Appliances placed
More informationHybrid MEMS Proportional Pneumatic Valve Project 16HS1
Marquette University Milwaukee School of Engineering Purdue University University of California, Merced University of Illinois, Urbana-Champaign University of Minnesota Vanderbilt University Hybrid MEMS
More informationDESIGN AND TESTING OF A DUAL-MODE SCRAMJET FOR OPTICAL MEASUREMENT TECHNIQUES
DESIGN AND TESTING OF A DUAL-MODE SCRAMJET FOR OPTICAL MEASUREMENT TECHNIQUES Author: Brian Advisor: Chris Goyne and Jim McDaniel University of Virginia Abstract The following research paper presents an
More informationMethods of combustion in combustion chambers that are specially adapted for generation of combustion products of high pressure or high velocity.
F23R GENERATING COMBUSTION PRODUCTS OF HIGH PRESSURE OR HIGH VELOCITY, e.g. GAS-TURBINE COMBUSTION CHAMBERS (fluidised bed combustion apparatus specially adapted for operation at superatmospheric pressures
More informationEnhance the Performance of Heat Exchanger with Twisted Tape Insert: A Review
Enhance the Performance of Heat Exchanger with Twisted Tape Insert: A Review M.J.Patel 1, K.S.Parmar 2, Umang R. Soni 3 1,2. M.E. Student, department of mechanical engineering, SPIT,Basna, Gujarat, India,
More informationA Feasibility Study on Production of Solid Fuel from Glycerol and Agricultural Wastes
International Transaction Journal of Engineering, Management, & Applied Sciences & Technologies. International Transaction Journal of Engineering, Management, & Applied Sciences & Technologies http://www.tuengr.com,
More informationSports Car Brake Cooling Simulation with CAD-Embedded CFD
Automotive Sports Car Brake Cooling Simulation with CAD-Embedded CFD By Mike Gruetzmacher, FloEFD Product Specialist, Mentor Graphics B rake cooling is a crucial area in motorsport and sports car engineering.
More informationIHS CHEMICAL PEP Report 29J. Steam Cracking of Crude Oil. Steam Cracking of Crude Oil. PEP Report 29J. Gajendra Khare Principal Analyst
` IHS CHEMICAL PEP Report 29J Steam Cracking of Crude Oil December 2015 ihs.com PEP Report 29J Steam Cracking of Crude Oil Gajendra Khare Principal Analyst Michael Arné Sr. Principal Analyst PEP Report
More informationGlobal Journal of Engineering and Technology Review. The Fuel Briquette Compressed Machine from Palm Residue
Global Journal of Engineering and Technology Review Journal homepage: www.gjetr.org Global J. Eng. Tec. Review 3 (2) 7 11 (2018) The Fuel Briquette Compressed Machine from Palm Residue Sakultala Wannapakhe
More informationTransesterification of Palm Oil in Series of Continuous Stirred Tank Reactors
- (P) The Joint ternational onference on Sustainable Energy and Environment (SEE) - December, Hua Hin, Thailand Transesterification of Palm Oil in Series of ontinuous Stirred Tank Reactors Theerayut Leevijit,*,
More informationDEPARTMENT OF AUTOMOBILE ENGINEERING CURRICULUM. B. Tech. AUTOMOBILE ENGINEERING. In Specialization with MOTORSPORT ENGINEERING
DEPARTMENT OF AUTOMOBILE ENGINEERING CURRICULUM (Applicable for Students admitted from Academic Year 2015-16) B. Tech. AUTOMOBILE ENGINEERING In Specialization with MOTORSPORT ENGINEERING SCHOOL OF MECHANICAL
More informationSchedule of Events. Mech 1751: Introduction to Mechatronics. What is an actuator? Electric Actuators and Drives. Actuators. Dr. Stefan B.
Schedule of Events Week Date Content Assignment Notes Mech 1751: Introduction to Mechatronics Actuators 1 2 3 4 5 6 7 8 9 09/3 16/3 23/3 30/3 6/4 20/4 27/4 4/5 11/5 Introduction Design Process System Modelling
More informationOptimizing Combustion Processes. Facilitating Cost-effective and Environmentally Friendly Products
Optimizing Combustion Processes Facilitating Cost-effective and Environmentally Friendly Products The combustion process poses significant challenges with respect to maximizing performance and fuel economy.
More informationTable 2. NOx Control for Stoker-fired Industrial Boilers (Bituminous or Sub-bituminous Coal) (WDNR 1989) Control Techniques NOx Reduction Percent Commercial Availability and Comments FGR 40 to 45 Available.
More informationGas Turbines and Aerospace Propulsion
Gas Turbines and Aerospace Propulsion 1 Technische Universität Darmstadt Department of Mechanical Engineering 2 Institutes 29 professors 27 institutes 3650 students 250 M.Sc. leaving each year 475 researchers
More informationIgnition Reliability in SGT-750 for Gas Blends at Arctic Conditions. Magnus Persson Combustion Expert / Distributed Generation / Sweden
Ignition Reliability in SGT-750 for Gas Blends at Arctic Conditions Magnus Persson Combustion Expert / Distributed Generation / Sweden siemens.com/power-gas Table of content Objectives of the Project SGT-750
More informationSILVER OAK COLLEGE OF ENGINEERING & TECHNOLOGY MECHANICAL ENGINEERING DEPARTMENT MID SEMESTER-1 EXAMINATION SYLLABUS
MID SEMESTER- EXAMINATION SYLLABUS NAME OF SUBJECT: OPERATION RESEARCH SUBJECT CODE: 790 PERCENTAGE OF MID SEM EXAM SYLLABUS: 6 % Chapter No. 7 Topic Name Operations Research: Origin of Operation Research,
More informationDIPLOMA IN MECHANICAL ENGINEERING (1020) Date and Day. Subject code
DIPLOMA IN MECHANICAL ENGINEERING (1020) code ( M-Scheme ) 32031 Strength of Materials 32032 Manufacturing Processes 32033 Machine Drawing I 1.11.2018 1 32041 Heat Power Engineering 32042 Special Machines
More informationEffects of Bio-coal Briquette Shape on Transport Phenomena in a Curing Unit by CFD Technique M. H. Narasingha*, K.
Effects of Bio-coal Briquette Shape on Transport Phenomena in a Curing Unit by CFD Technique M. H. Narasingha*, K. Pana-Suppamassadu Department of Chemical Engineering, King Mongkut s University of Technology
More informationThe Best Biobriquette Dimension and its Particle Size
The Best Biobriquette Dimension and its Particle Size Harwin Saptoadi * Department of Mechanical Engineering, Gadjah Mada University, Yogyakarta, Indonesia Abstract: Indonesia has abundant supply of biomass,
More informationValve Body Service and Repair, Removal and Replacement: 0B5A Transmission, Mecha...
Page 1 of 7 Mechatronic Circuit Board, Removing and Installing Removing - Remove the DSG Transmission Mechatronic (J743). Refer to => [ Mechatronic, Removing and Installing ] See: Valve Body, ASMT > Removal
More informationMeasurements Lab (620451):
Measurements Lab (620451): To introduce the practical side of actuators and sensors, also helping to understand how that device can be used. 1. INTRODUCTION FOR MEASURMENT 2. NOISE MEASUREMENT 3. PIEZO-ELECTRIC
More informationAEROSTAR SOLUTIONS. A Project Association AERONAUTICAL AND MECHANICAL PROJECTS FOR FINAL YEAR STUDENTS
AEROSTAR SOLUTIONS A Project Association AERONAUTICAL AND MECHANICAL PROJECTS FOR FINAL YEAR STUDENTS We had started our project center for the students who are seems too weak in subjects, lack of sources,
More informationRenewable Energy. Presented by Sean Flanagan
Renewable Energy Presented by Sean Flanagan Background Flanagan and Sun since 2004 Solar electric (PV) off grid and grid tie, solar thermal, pool heating, solar air heating, small wind turbines, microhydro
More informationEffect of Catalysts and their Concentrations on Biodiesel Production from Waste Cooking Oil via Ultrasonic-Assisted Transesterification
Paper Code: ee016 TIChE International Conference 2011 Effect of Catalysts and their Concentrations on Biodiesel Production from Waste Cooking Oil via Ultrasonic-Assisted Transesterification Prince N. Amaniampong
More informationIndustrial applications of ultrasonically stimulated droplet generation
Industrial applications of ultrasonically stimulated droplet generation Justin Buckland * The Technology Partnership plc Melbourn Science Park, Cambridge Road, Melbourn, Hertfordshire SG8 6EE, UK Abstract
More informationSUMMARY: DETAIL DESIGN REVIEW
March 2, 2015 [Type here] - 1 - SUMMARY: DETAIL DESIGN REVIEW Biodiesel Reactor Improvements University of Idaho Team Liquid Gold Meeting: BAE Conference Room, 3:30, 02/26/2015 Present: Jon Van Gerpen,
More informationNumber Title Year Organization Page
Id Number Title Year Organization Page 365528 B93.1 Dimension Identification Code for Fluid Power Cylinders; Appendices I and II (NFP(A) T3.6.2-1964) R(1994) 365529 B93.2 Fluid Power Systems and Products
More informationYour Plant Deserves Pure-Aire!
Your Plant Deserves Pure-Aire! PF Series High Efficiency Filters High Technology Filter Elements The Pure-Aire PF Series High Efficiency Unique Push-Fit, Double O-Ring Seal filter-to-head chamfered connection
More informationMr. Sanin Triyanond Chairman of Thai Biodiesel Producer Association. Asia Palm Oil Conference (APOC) 2015 CO-OP Suratthani, Thailand 20 August 2015
Mr. Sanin Triyanond Chairman of Thai Biodiesel Producer Association Asia Palm Oil Conference (APOC) 2015 CO-OP Suratthani, Thailand 20 August 2015 Outline 1. Current Situation of Palm Oil Industry 2. Current
More informationFluid Propellant Fundamentals. Kevin Cavender, Franco Spadoni, Mario Reillo, Zachary Hein, Matt Will, David Estrada
Fluid Propellant Fundamentals Kevin Cavender, Franco Spadoni, Mario Reillo, Zachary Hein, Matt Will, David Estrada Major Design Considerations Heat Transfer Thrust/Weight System Level Performance Reliability
More informationSpecial Products Catalogue 2018 Visit our new website!
Special Products Catalogue 2018 Visit our new website! www.aams-salvarani.com Index ENTAM (European Network for Testing of Agricultural Machines) is the network constituted by the official testing stations
More informationYARWAY NARVIK MODEL 88 SPID SMALL PIPE INLINE DESUPERHEATER
A wide range of desuperheaters, pneumatic actuators, strainers to satisfy all specifications of the power, pulp and paper industry and process gas applications FEATURES Fabricated construction Special
More informationResearch Outcomes Implementation of Biodiesel Processing Technology
Research Outcomes Implementation of Biodiesel Processing Technology Tirto Prakoso Group on Research of Biodiesel Center for Research on Sustainable Energy Institute of Technology Bandung Conference on
More informationConversion Processes 1. THERMAL PROCESSES 2. CATALYTIC PROCESSES
Conversion Processes 1. THERMAL PROCESSES 2. CATALYTIC PROCESSES 1 Physical and chemical processes Physical Thermal Chemical Catalytic Distillation Solvent extraction Propane deasphalting Solvent dewaxing
More informationVehicle Aerodynamics Subscription Development of Numerical Simulation Method of Flow Around Automobile Using Meshfree Method
Vehicle Aerodynamics Subscription 2005-01-0544 Development of Numerical Simulation Method of Flow Around Automobile Using Meshfree Method 2005-01-0545 A Downforce Optimization Study for a Racing Car Shape
More information