bar. A) d = 8 mm A) d = 8 mm D) Cleaning Nozzles B) d = 7 mm Nozzles B) d = 7 mm E) Mixing C) d = 6 mm C) d = 6 mm.

Size: px

Start display at page:

Download "bar. A) d = 8 mm A) d = 8 mm D) Cleaning Nozzles B) d = 7 mm Nozzles B) d = 7 mm E) Mixing C) d = 6 mm C) d = 6 mm."

Ernest Webster
5 years ago
Views:

1 IM 15 Rotary Jet Mixer Tank gitators and Mixers Flow rate Relationship between inlet pressure and flow rate for liquids with waterlike properties for the IM 15 Rotary Jet Mixer. Volumetric flow rate [m 3 /h] m³/h bar Reach of jet Reach of jet for the IM 15 during cleaning, and indicative reach of jet for mixing of liquids with water-like properties. Reach of jet [m] m D E bar Inlet pressure Inlet pressure ) d = 8 mm ) d = 8 mm D) leaning Nozzles ) d = 7 mm Nozzles ) d = 7 mm E) Mixing ) d = 6 mm ) d = 6 mm Dimensions (mm) The Rotary Jet Mixing techlogy Traditional Mixing techlogy Round pumping Propeller mixing D F E D = Rotary Jet Mixer =Gas =Product D = Liquid feed = Liquid feed =Product G H J D E F G H J ø216 ø264 ø

2 Tank gitators and Mixers IM 20 Rotary Jet Mixer. kysuperior mixing Liquid, Gas and Powder IM 20 Rotary Jet Mixer The patented IM 20 Rotary Jet Mixer (RJM) does t only mix fast, efficient and uniform but creates also the necessary process flexibility that makes it easy to switch to new product formulations with diverse viscosities, densities and volumes. esides classic liquid to liquid mixing the RJM is excellent for gas and powder dispersion plus a superb tank cleaning machine. pplications Process and storage vessels between m 3 used in a wide range of industries such as: beer & beverage, food & ingredients, home & personal care, health care, biotech and chemical industry etc. Operation Secure that the mixer is positioned in the correct level and submerged into the liquid before round pumping or when adding any additional products from any up-stream pipe works.. TEHNIL DT Lubricant:... Self-lubricating with the mixing/cleaning fluid onnection:... Standardthread2 SP or NPT, female Min.tankopening:... Seedimensiondrawings Pressure Workingpressure: bar Recommended pressure duringmixing: bar Recommended pressure duringip: bar PHYSIL DT Materials Materials: Weight: ISI 316L, ISI 316, SF 2205, PEEK, PVDF, Tefzel, eramics kg Temperature Max.workingtemperature:...95 Max.ambienttemperature: enefits Using the IM 20 Rotary Jet Mixer makes it possible, at a modest investment, to perform fast and efficient mixing in a sanitary system. In traditional systems, using propeller mixers, a rotating shaft penetrates the tank wall, and a mechanical seal and a gear box are installed. With the Rotary Jet Mixer techlogy the shaft, seal and gearbox are eliminated, and a more sanitary design is obtained. With the Rotary Jet Mixing techlogy good mixing is achieved without the use of baffles. The Rotary Jet Mixer can also be used for gas dispersion and for dispersion and dissolving of powder. The IM 20 can furthermore be used for efficient IP when the tank is empty, saving liquid, chemicals and energy compared to a fixed spray ball IP system..1049

3 IM 20 Rotary Jet Mixer Tank gitators and Mixers Flow rate Relationship between inlet pressure and flow rate for liquids with waterlike properties for the IM 20 Rotary Jet Mixer. Volumetric flow rate [m 3 /h] m³/h Nozzles ) d = 10 mm ) d = 9 mm ) d = 8 mm bar Inlet pressure Reach of jet Reach of jet for the IM 20 during cleaning, and indicative reach of jet for mixing of liquids with water-like properties. Reach of jet [m] m D E bar Inlet pressure ) d = 10 mm D) leaning Nozzles ) d = 9 mm E) Mixing ) d = 8 mm Dimensions (mm) The Rotary Jet Mixing techlogy Traditional Mixing techlogy Round pumping Propeller mixing D D F E = Rotary Jet Mixer =Gas =Product D = Liquid feed = Liquid feed =Product G H J D E F G H J ø280 ø343 ø

4 Tank gitators and Mixers IM 25 Rotary Jet Mixer. kysuperior Mixing Liquid, Gas and Powder IM 25 Rotary Jet Mixer The patented IM 25 Rotary Jet Mixer (RJM) does t only mix fast, efficient and uniform but creates also the necessary process flexibility that makes it easy to switch to new product formulations with diverse viscosities, densities and volumes. esides classic liquid to liquid mixing the RJM is excellent for gas and powder dispersion plus a superb tank cleaning machine. pplications Process and storage vessels between m 3 used in a wide range of industries such as: beer & beverage, food & ingredients, home & personal care, health care, biotech and chemical industry etc. Operation Secure that the mixer is positioned in the correct level and submerged into the liquid before round pumping or when adding any additional products from any up-stream pipe works.. TEHNIL DT Lubricant:... Self-lubricating with the mixing/cleaning fluid onnection:... Standardthread2.5 SP, female Min.tankopening:... Seedimensiondrawings Pressure Workingpressure: bar Recommended pressure duringmixing: bar Recommended pressure duringip: bar PHYSIL DT Materials Materials: Weight: ISI 316L, ISI 316, SF 2205, PEEK, PVDF, arbon, Tefzel, eramics kg Temperature Max.workingtemperature:...95 Max.ambienttemperature: enefits Using the IM 25 Rotary Jet Mixer makes it possible, at a modest investment, to perform fast and efficient mixing in a sanitary system. In traditional systems, using propeller mixers, a rotating shaft penetrates the tank wall and a mechanical seal and a gear box are installed. With the Rotary Jet Mixing techlogy the shaft, seal and gearbox are eliminated, and a more sanitary design is obtained. With the Rotary Jet Mixing techlogy good mixing is achieved without the use of baffles. The Rotary Jet Mixing techlogy can also be used for gas dispersion and for dispersion and dissolving of powder. The IM 25 can furthermore be used for efficient IP when the tank is empty, saving liquid, chemicals and energy compared to a fixed spray ball IP system..1051

5 IM 25 Rotary Jet Mixer Tank gitators and Mixers Flow rate Relationship between inlet pressure and flow rate for liquids with waterlike properties for the IM 25 Rotary Jet Mixer. Volumetric flow rate [m 3 /h] m³/h D bar Inlet pressure Reach of jet Reach of jet for the IM 25 during cleaning, and indicative reach of jet for mixing of liquids with water-like properties. Reach of jet [m] m D bar Inlet pressure ) 2 x ø21 mm ) 2 x ø21 mm Nozzles ) 2 x ø19 mm Nozzles ) 2 x ø19 mm ) 2 x ø17 mm ) 2 x ø17 mm D) 2 x ø15 mm D) 2 x ø15 mm Dimensions (mm) The Rotary Jet Mixing techlogy Traditional Mixing techlogy Round pumping Propeller mixing D E D = Rotary Jet Mixer =Gas =Product D = Liquid feed = Liquid feed =Product F =2.5 SP G H D E F G H ø343 ø424 ø

6 Tank gitators and Mixers Product code 5507 lfa Laval MM UltraPure, Magnetic Mixer Please tice before ordering - Standard configuration according to PD sheet. - Special item number for USP class VI for female sililcon carbide bearing - To ensure easy and problem free operation please always order these three items together: Mixer unit, weld plate and pre-programmed frequency inverter - If in doubt please contact your lfa Laval technical support Item No, Item No RPL Ra<0.5 RPL Impeller diameter Ra<0.5 [EUR] Electropolished [EUR] Description [mm] [inch] MM MM MM MM MM Mixer without weldplate TD RPL Weld plate dimensions Ra<0.5 [EUR] Description ød [mm / inch] T [mm / inch] t [mm / inch] Weld plate. Required in order for the mixer to work Weld plate for MM / / / Weld plate for MM / / / 0.04 T t 45 o ød TD RPL [EUR] Description Lenze M1105SE frequency inverter for 0.37 kw (0.5 HP) drive in stainless steel cabinet (IP66) Lenze M1115SE frequency inverter for 1.1 kw (1.5 HP) drive in stainless steel cabinet (IP66) Frequency inverters.1053

7 Tools and spare parts for lfa Laval MM UltraPure, Magnetic Mixer Product code 5549 Tank gitators and Mixers Please tice before ordering The impeller tool is required for installation. The tool fits all sizes and only one is required. The sockets are different for MM338 and MM434 If in doubt please contact your lfa Laval Technical Support RPL [EUR] Description Removal Tool Rod for MM338 and 434. Length 60mm / 24" Tools TD Rod Extension MM338 and MM434. Length 90mm / 36" TD earing socket MM earing socket MM434 TD

8 Tank gitators and Mixers Product code: 5504 Range of gitators New range of agitators New wide range of lfa Laval agitators replaces the LKR. The range includes 4 different types of sanitary agitators LT lfa Laval Top mounted agitator LT lfa Laval Top mounted agitator with ottom steady bearing L lfa Laval ottom mounted agitator LS lfa Laval Side mounted agitator The agitator range is with its high hygienic standards targeted at sanitary applications. The high energy efficiency is however just as attractive to n-sanitary applications. For any tank size the option of an agitator with low energy consumption is available. ll agitators are built using the same basic modules in various sizes. Selecting an LS agitator is possible by means of the following tables. Please tice that the tables represent only a limited range of the available configurations. Direct replacement of the LKR-5 is possible but the available range may offer a more efficient solution when selected based on tank size and product. For configurations t included in the ordering leaflet please use the Enquiry Form available from your local lfa Laval office. Precondition of selecting LS pplication: Selection: hoose the agitator from the list by tank volume interval. Note: The tank height/diameter ratio must be lower than 4 - if the ratio is higher, please contact lfa Laval. Duty: For keeping the media homogeneous/agitation (agitation time for homogeus media: max. 15 min) - typical for storage tanks Media(s): Milk, pasteurized milk, recombined milk, raw milk, skim milk, whey, wine, juices, etc. Note: No heavy particles in the media Viscosity: Max. Specific gravity (kg/dm³): Max. 1.1 Temperature ( ): Max. 95 (IP temperature) Tank Shape: H Tank/øiD < 4 TD O-ring seal against tank flange, drain, oil trap (only geared versions) and shaft seal: single mechanical ELLOW SEL TD O-ring seal against tank flange, drain, oil trap (only geared versions) and shaft seal: single mechanical ne bellow seal.1055

9 LS, 50 Hz, 0-10 cp Product code: 5504 Tank gitators and Mixers DirectDrive GearedDrive Tank Size (50 Hz) Viscosity 0-10cP (50 Hz) Viscosity 0-10cP Voltage (V) (rpm) Lantern (m 3 ) (rpm) Voltage (V) Seal TE < > > TE < > > TE < > > TE < > > TE > < > TE > < > TE > < > TE > < > TE > < > TE > < > TE / > < > TE / > < > TE / > < > TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE

10 Tank gitators and Mixers Product code: 5504 LS, 50 Hz, 0-10 cp DirectDrive (50 Hz) Viscosity 0-10cP Voltage (V) (rpm) TE TE TE TE TE TE TE TE TE TE TE TE / < / < / < / < / < / < / < / < / < / < / < / < Tank Size (m 3 ) > > > > > > > > > > > > GearedDrive (50 Hz) Viscosity 0-10cP Lantern (rpm) Voltage (V) Seal > > > > > > > > > > / > / / > TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE

11 LS, 50 Hz, cp Product code: 5504 Tank gitators and Mixers DirectDrive GearedDrive Tank Size (50 Hz) Viscosity 10-50cP (50 Hz) Viscosity 10-50cP Voltage (V) (rpm) Lantern (m 3 ) (rpm) Voltage (V) Seal TE TE TE < > > TE TE TE TE TE < > > TE TE TE TE TE < > > TE TE TE TE > 12.0 TE < > TE TE TE TE > 18.0 TE < > TE TE TE TE > 25.0 TE < > TE TE TE TE / > 35.0 TE < > TE TE TE TE / > 55.0 TE < > TE TE TE TE / > 75.0 TE < > TE TE TE TE / > TE < > TE TE TE TE / > TE < > TE TE TE TE / > TE < > TE TE TE TE / > / TE < > TE TE

12 Tank gitators and Mixers Product code: 5504 LS, 60 Hz, 0-10 cp DirectDrive GearedDrive Tank Size (60 Hz) Viscosity 0-10cP (60 Hz) Viscosity 0-10cP Voltage (V) (rpm) Lantern (m 3 ) (rpm) Voltage (V) Seal TE < > > TE < > > TE < > > TE < > > TE > < > TE > < > TE > < > TE > < > TE > < > TE > < > TE > < > TE > < > TE > < > TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE

13 LS, 60 Hz, 0-10 cp Product code: 5504 Tank gitators and Mixers DirectDrive (60 Hz) Viscosity 0-10cP Voltage (V) (rpm) TE < TE < TE < TE < TE < TE < TE < TE < TE < TE < TE < N < Tank Size (m 3 ) > > > > > > > > > > > > GearedDrive (60 Hz) Viscosity 0-10cP Lantern (rpm) Voltage (V) Seal > > > > > > > > > > > > TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE

14 Tank gitators and Mixers Product code: 5504 LS, 60 Hz, cp DirectDrive GearedDrive Tank Size (60 Hz) Viscosity 10-50cP (60 Hz) Viscosity 10-50cP Voltage (V) (rpm) Lantern (m 3 ) (rpm) Voltage (V) Seal TE TE TE < > > TE TE TE TE TE < > > TE TE TE TE TE < > > TE TE TE TE >12.0 TE < > TE TE TE TE >18.0 TE < > TE TE TE TE >25.0 TE < > TE TE TE < TE >35.0 TE > TE TE TE < TE >55.0 TE > TE TE TE < TE >75.0 TE > TE TE TE < TE > TE > TE TE TE < TE > TE > TE TE TE < TE > TE > TE TE TE < TE > TE > TE TE

15 LS - Side Mounted gitator Product code: 5504 Tank gitators and Mixers RPL EUR Tank flange S M ø øf ød øp DirectDrive - Sealing arrangement - With Lantern TE ø TE ø S TE ø M TE ø TE ø TE ø TD TE ø TE ø GearedDrive - Sealing arrangement - Without Lantern TE ø TE ø TE ø TE ø TE ø TE ø TE ø TE ø TE ø TE ø TE ø TE ø TE ø TE ø TE ø TE ø Without Lantern - Sealing arrangementwithout Lantern TE ø TE ø TE ø TE ø TE ø TE ø TE ø TE ø TE ø TE ø TE ø TE ø TE ø TE ø TE ø TE ø ØP ØP ØP ØD ØD ØF S ØD S ØF ØF M M Ø Ø TD Ø TD Other OptionsProduct code: 5508 TE Welding flanges for tank connection ø250 TE ø300 TE ø

16 Tank gitators and Mixers Product code: 5504 LS - Side Mounted gitator RPL Tank GearedDrive - Sealing S M ø øf ød øp EUR flange arrangement - With Lantern TE ø TE ø TE ø TE ø TE ø TE ø TE ø S M TE ø TE ø TD TE ø TE ø TE ø TE ø TE ø TE ø TE ø GearedDrive - Sealing arrangement - With Lantern TE ø TE ø TE ø TE ø TE ø TE ø TE ø TE ø TE ø TE ø TE ø TE ø TE ø TE ø TE ø TE ø ØP ØP ØD ØD S ØF ØF M Ø Ø TD Other OptionsProduct code: 5508 TE Welding flanges for tank connection ø250 TE ø300 TE ø

17 LS - Side Mounted gitator Product code: 5504 Tank gitators and Mixers LS Standard configuration Technical Data Surface finish: Mechanical polish Ra<0.8 μm Prepared for frequency duties with: PT (Thermistors) Motor Protection lass IP55 Motor olor RL 5010 GearedDrive oaxial gear Propellers 3- bladed Energy Saving Foils (EnSaFoil) Material: earing house Stainless steel Mounting flange ISI 316L Product contact parts (Stainless steel) ISI 316L Product contact parts (Rubber parts) EPDM / FEP Mechanical Sealing (DirectDrive) arbon (FD) / Silicium arbide Mechanical Sealing (GearedDrive) Silicium arbide / Silicium arbide RPL EUR Motor size [kw] to Description Options Material certificates 3.1 acc. EN (for parts with product contact) including FD onformity statement acc. 21 FR 177 for gaskets and elastomers Food approved oil USD-H1 - dd-on price (Only geared models) Stainless Steel Motor over - dd on price (geared models) Stainless Steel Motor over - dd on price (direct drive models).1064

18 Tank gitators and Mixers Product code: 5504 LS - Side Mounted gitator Options TEX TEXin tank II1GDcTX, II2GDcTX or II3GDcTX TEXoutside tank II2GDcTX or II3GDcTX gitators can be delivered approved for TEX environment with declaration of conformity according to directive 94/9/E, approved according to TEX categories Surface finish Less Sanitary application Shot peened propellers For high Sanitary application Mechanical polished with succeeding electropolish Material Product contact parts (Stainless steel) ISI 304L (Lower than standard), ISI 904L, SF 2205 Product contact parts (Rubber parts) EPDM / FEP (Depending on product) Mechanical Sealing (GearedDrive) Other options available Various options Voltage and Frequency: ll motors voltages and frequencies are available Seal rrangements: Many variations - see PD Sheet Drive: Type of drive unit. Ex. right angle gear Propellers: 2- or 3- bladed Energy Saving Foils (EnSaFoil).1065

19 IM 10 Rotary Jet Mixer Product code: 5509 Mixer Product code: 5546 Welding daptor Product code: 5548 Tools Tank gitators and Mixers Surface treatment: right RPL No. of Nozzles/ Flow at 5 bar EUR Dimension Dimension (mm) onnection PEEK m 3 /h E F Thread (1 Rp-female (SP)) TE x ø TE x ø TE x ø PEEK TE30N x ø TE30N x ø TE30N x ø Thread (1 NPT-female) TE52D030 TE52D031 TE52D032 onnection Welding adapter for IM 10 1 Rp-male (SP)/1 ISO thread pipe (OD = 33.7 mm) 1 NPT-male/1 NSI pipe (OD = 33.4 mm) 1 Rp-male (SP)/1½ dairy pipe (OD = 38 mm) Gasket is included TE300XX-70 TE30N0XX-70 TEX TEX dd-on prices TE81085 explanation TE300XX-70 TE30N0XX-70 Standard tool kit aliper (1 piece) Socket wrench with pin (1 piece) Spanner for IM 10, TJ20G and MultiJet 25 (1 piece) Spanner (1 piece) TD dd-on explanation TEX approved machine for use in explosive atmospheres. atagory 1 for installation in zone 0/20 in accordance to Directive 94/9/E. EX II 1 GD c T175 Tamp0 to +140 ; aseefa10tex0188x.1066

20 Tank gitators and Mixers Product code: 5509 Mixer Product code: 5546 Welding daptor Product code: 5548 Tools IM 15 Rotary Jet Mixer Surface finish: right No. of RPL Flow at 5 Nozzles/ EUR bar Dimension Guide Dimension (mm) onnection Stainless Steel m 3 /h E F Thread (1½ Rp-female (SP)) TE x ø6 100% TE x ø7 100% TE x ø7 0% TE x ø8 0% TE x ø8 100% TE x ø10 0% TE x ø11 0% TE x ø6 100% TE x ø7 100% TE x ø7 0% TE x ø8 0% TE x ø8 100% TE x ø10 0% TE x ø11 0% Thread (1½ NPT-female) TE52D018 TE52D020 TE52D021 onnection Welding adapter for IM 15 1½ Rp-male (SP)/40 mm DIN pipe (OD = 40 mm) 1½ Rp-male (SP)/1½ ISO thread pipe (OD = 48.3 mm) 1½ Rp-male (SP)/2 dairy pipe (OD = 51 mm) TE31XXX-70 TE81055 Special tools TE81033 TE81129 TE81130 explanation TE31XXX-70 TEX Unbraco key for 3/16" screw (1 piece) Screw driver Unbraco 5/32" (2 pieces) 8mmsocketwrenchwithpin(1piece) dd-on prices Standard tool kit TD Pusher for 1½" machines Pusher for collar bush, 1.5" gear frame Tool for upper collar dd-on explanation TEX approved machine for use in explosive atmospheres. atagory 1 for installation in zone 0/20 in accordance to Directive 94/9/E. EX II 1 GD c T175 Tamp0 to +140 ; aseefa10tex0188x.1067

21 IM 20 Rotary Jet Mixer Product code: 5509 Mixer Product code: 5546 Welding adapter Product code: 5548 Tools Tank gitators and Mixers Surface finish: right RPL No. of Nozzles/ Flow at 5 bar EUR Dimension Guide Dimension (mm) onnection Stainless Steel m 3 /h E F Thread (2 Rp-female (SP)) TE x ø8 100% TE x ø9 100% TE x ø9 0% TE x ø10 0% TE x ø12 0% TE x ø13 0% TE x ø15 0% TE x ø8 100% TE x ø9 100% TE x ø9 0% TE x ø10 0% TE x ø12 0% TE x ø13 0% TE x ø15 0% Thread (2 NPT-female (SP)) J H leaning unit TE52D140 leaning unit for IM 20, 2" Rp (SP) 2" Rp 210 TE52D240 leaning unit for IM 20, 2" NPT 2" NPT 210 TE52D025 TE52D026 onnection Welding adapter for IM 20 2 Rp-male (SP)/2 ISO thread pipe (OD = 60.3 mm) 2 Rp-male (SP)/2½ dairy pipe (OD = 63.5 mm) Gasket is included TE31XXX-70 TE81055 Special tools TE81031 TE81032 TE81130 TE81132 explanation TE32XXX-70 TEX Unbraco key for 3/16" screw (1 piece) Screw driver Unbraco 5/32" (2 pieces) Unbraco key for 1/4" screw (1 piece) Screw driver Unbraco 1/4" (1 piece) aliper (1 piece) Socket wrench with pin (1 piece) dd-on prices Standard tool kit Pusher for gear frame Fixture set for gear frame Tool for upper collar Tool for lower collar dd-on explanation TEX approved machine for use in explosive atmospheres. atagory 1 for installation in zone 0/20 in accordance to Directive 94/9/E. EX II 1 GD c T175 Tamp0 to +140 ; aseefa10tex0188x TD

22 E Tank gitators and Mixers Product code: 5509 Mixer Product code: 5548 Tools IM 25 Rotary Jet Mixer Surface treatment: right RPL No. of Nozzles/ Flow at 8 bar EUR Dimension Guide Dimension (mm) onnection Stainless Steel m 3 /h F Thread (2½ Rp-female (SP)) TE x ø15 0% TE x ø17 0% TE x ø19 0% TE x ø21 0% F TD TE330XX-70 TE81065 Special tools TE81031 TE81032 explanation TE330XX-70 TEX Other connection available on request Unbracokeyfor3/16"screw(1piece) Screw driver Unbraco 5/32" (2 pieces) Unbraco key for 1/4" screw (1 piece) Screw driver Unbraco 1/4" (1 piece) aliper (1 piece) dd-on prices Standard tool kit TD Pusherforgearframe Fixture set for gear frame dd-on explanation TEX approved machine for use in explosive atmospheres. atagory 1 for installation in zone 0/20 in accordance to Directive 94/9/E. EX II 1 GD c T175 Tamp0 to +140 ; aseefa10tex0188x.1069

4.1 Tank Cleaning Equipment

4.1 Tank Cleaning Equipment .1 Tank Cleaning Equipment lfa Laval s comprehensive range of cleaning devices guarantees impact, making the most economical use of energy, manpower and cleaning solutions. PD Sheets ToftejorgSaniMicroRotarySprayHead....1.86