VIESMANN VITORONDENS 200-T Oil Unit condensing boilers 20.2 to kw

Size: px

Start display at page:

Download "VIESMANN VITORONDENS 200-T Oil Unit condensing boilers 20.2 to kw"

Esmond Bradford
5 years ago
Views:

Suitable for open and balanced flue operation with fuel oil DIN 5160-1 L standard, low sulphur fuel oil DIN 5160-1 L and fuel oil DIN 5160-6 L A Bio 10: Suitable for low sulphur fuel oil L with up to

1 VISMANN VITORONDNS 200-T Oil Unit condensing boilers 20.2 to 107. kw Datasheet Part no. and prices: see pricelist VITORONDNS 200-T Type BR2A 20.2 to 5.7 kw Cast iron low temperature oil boiler with condensing heat exchanger With Vitoflame 00 blue flame oil burner (20.2 to 5.7 kw). Suitable for open and balanced flue operation with fuel oil DIN L standard, low sulphur fuel oil DIN L and fuel oil DIN L A Bio 10: Suitable for low sulphur fuel oil L with up to 10 % biocomponents (FAM). VITORONDNS 200-T Type J2RA 67.6 to 107. kw Cast iron low temperature oil boiler with condensing heat exchanger With Vitoflame 00 blue flame oil burner (67.6 to 107. kw). Suitable for open flue operation with fuel oil DIN L standard, low sulphur fuel oil DIN L and fuel oil DIN L A Bio 10: Suitable for low sulphur fuel oil L with up to 10 % biocomponents (FAM). 5/201

$The sectional cast iron utectoplex heating surface guarantees high operational reliability. By ensuring an even heat flux, stress fractures are virtually eliminated.$

2 Vitorondens 200-T, type BR2A The Vitorondens 200-T is an advanced cast iron oil condensing boiler at an attractive price. The sectional cast iron utectoplex heating surface guarantees high operational reliability. By ensuring an even heat flux, stress fractures are virtually eliminated. The wide water galleries prevent sedimentation and boiling noises. Flexible gaskets permanently seal the individual sections on the hot gas side. The horizontal layout of the hot gas flues also permits thorough and easy cleaning of the boiler. The corrosion-resistant stainless steel Inox-Radial heat exchanger downstream ensures an efficient heat recovery, with residue-free condensation of the flue gases. The Unit blue flame oil burner stands for particularly clean, environmentally responsible and efficient combustion. A Inox-Radial heat exchanger B Highly effective thermal insulation C utectoplex heating surface made from homogeneous special cast iron D Digital Vitotronic boiler control unit Vitoflame 00 Unit oil burner Standard seasonal efficiency [to DIN] up to 97 % (H s ) [gross cv] / 10 % (H i ) [net cv]. utectoplex heating surface for high operational reliability and a long service life. Cast sections with flexible gaskets for permanent hot gas tightness. Corrosion-resistant stainless steel Inox-Radial heat exchanger. JetFlow system for optimum heating water distribution. asy to use Vitotronic control unit with plain text and graphic display. All commercially available L-type fuel oils can be used. Also for fuel oil DIN L A Bio 10: Low sulphur fuel oil L with up to 10 % biocomponents (FAM). Quiet operation thanks to external silencer. Horizontal hot gas flue layout enables straightforward and affordable maintenance. 2 VISMANN VITORONDNS 200-T

3 Specification, type BR2A, 20.2 to 5.7 kw Rated heating output T F /T R = 50/0 C kw T F /T R = 80/60 C kw Rated heat input kw Product ID C-005CL102 Transport dimensions (incl. thermal insulation) Length mm Width mm Height mm Overall dimensions Total length (incl. heat exchanger and mm thermal insulation) Total width mm Total height mm Plinth height mm Height (installed below the boiler) DHW cylinder Capacity 10 to 200 l mm Capacity 50 l mm Weight, boiler body kg Total weight kg Boiler with thermal insulation, heat exchanger, burner and boiler control unit Content boiler l Content boiler water l Permiss. operating pressure bar MPa 0. Boiler connections Boiler flow and return G 1½ 1½ 1½ 1½ 1½ 1½ Safety connection G 1½ 1½ 1½ 1½ 1½ 1½ (Safety valve at the safety equipment block) Drain outlet G 1½ 1½ 1½ 1½ 1½ 1½ Condensate drain 7 mm Flue gas parameters * Temperature at 0 C return temperature C C return temperature C Mass flow rate for fuel oil L kg/h Standard seasonal efficiency [to DIN] at heating system temp. 50/0 C % 97 (H s ) [gross cv] / 10 (H i ) [net cv] Flue outlet 7 mm Ventilation air connection 7 mm Boiler gas content l Available draught *4 Pa mbar Sound power level (to N ISO ) in balanced flue operation db(a) 60 in open flue operation db(a) * Values for calculating the size of the flue system to N 184 relative to 1 % CO 2 for fuel oil L. Flue gas temperatures as an average gross value to N 04 at 20 C combustion air temperature. *4 Observe when sizing the chimney. VITORONDNS 200-T VISMANN

4 Specification, type BR2A, 20.2 to 5.7 kw (cont.) KTS H AB D C KR KV KR KOA KV F RLU 127 G b c a A B C D F G Air vent valve Safety valve Diaphragm expansion vessel connection Fill valve Boiler flue connection Silencer Plinth H Safety equipment block (accessory) Drain outlet KTS Boiler water temperature sensor KV Boiler flow KR Boiler return RLU Ventilation air connection for balanced flue operation KOA Condensate drain Dimensions Rated heating output kw a mm b mm c mm VISMANN VITORONDNS 200-T

5 Specification, type BR2A, 20.2 to 5.7 kw (cont.) KR KV KR KV a b RLU c g e f d K K Vitocell -H or 00-H (For specification see chapter "DHW cylinder") Drain outlet and diaphragm expansion vessel KR Boiler return KV Boiler flow RLU Ventilation air connection for balanced flue operation Dimensions Rated heating output kw and and 5.7 With DHW cylinder below the boiler l 10 to to to and a mm b mm c mm d mm e mm f mm g mm Information on the Vitorondens 200-T up to 5.4 kw when using a DHW cylinder installed below the boiler: To reduce the installed height, the boiler can be provided with accessories for horizontal balanced flue operation (the accessories comprise an 87 flue bend and a suitable boiler flue connection). VITORONDNS 200-T VISMANN 5

6 Specification, type BR2A, 20.2 to 5.7 kw (cont.) Minimum clearances A Boiler B Heat exchanger C DHW cylinder 6 VISMANN VITORONDNS 200-T

7 Specification, type J2RA, 67.6 to 107. kw Rated heating output T F /T R = 50/0 C kw T F /T R = 80/60 C kw 6 80 Rated heat input kw Product ID C-005CL102 Transport dimensions Length mm Width mm Height mm Overall dimensions Total length (incl. heat exchanger and thermal insulation) mm Total width mm Total height mm Plinth height mm Weight, boiler body kg Total weight kg Boiler with thermal insulation, heat exchanger, burner and boiler control unit Content boiler l Content boiler water l Permiss. operating pressure bar MPa Boiler connections Boiler flow and return G Safety connection G 1½ 1½ 1½ (Safety valve at the safety equipment block) Drain outlet G 1½ 1½ 1½ Condensate drain 7 mm Flue gas parameters * Temperature at 0 C return temperature C C return temperature C Mass flow rate for fuel oil L kg/h Standard seasonal efficiency [to DIN] at heating system temp. 50/0 C % 97 (H s ) [gross cv] / 10 (H i ) [net cv] Flue outlet 7 mm Boiler gas content l Available draught *4 Pa mbar Note Vitorondens 200-T, type J2RA, should be provided with sound attenuation if sited near rooms that are sensitive to noise. A connection set for balanced flue operation will be available from late 201. This will significantly reduce noise emissions * Values for calculating the size of the flue system to N 184 relative to 1 % CO 2 for fuel oil L. Flue gas temperatures as an average gross value to N 04 at 20 C combustion air temperature. *4 Observe when sizing the chimney. VITORONDNS 200-T VISMANN 7

8 Specification, type J2RA, 67.6 to 107. kw (cont.) B KV KR C D F KTS 1149 A 1047 A KOA 104 G A B C D F Dimension incl. adjustable feet (when installing without plinth) Boiler flow/return distributor with integral safety equipment block Boiler flue connection Silencer Air vent valve Safety valve G Plinth Drain outlet KTS Boiler water temperature sensor KV Boiler flow KR Boiler return KOA Condensate drain Minimum clearances 850 A B 400 A Boiler B Heat exchanger 8 VISMANN VITORONDNS 200-T

9 Specification, type J2RA, 67.6 to 107. kw (cont.) A B C A Plinth (accessory) B Siphon C Neutralising system (accessory) VITORONDNS 200-T VISMANN 9

10 Specification Pressure drop on the heating water side B C Pressure drop mbar kpa 0.4 A Flow rate in m³/h A For 20.2 to 5.4 kw B For 42.8 and 5.7 kw C For 6.7 to 107. kw The Vitorondens 200-T is only suitable for fully pumped hot water heating systems. Subject to technical modifications. Viessmann Werke GmbH&Co KG D-5107 Allendorf Telephone: Fax: Viessmann Limited Hortonwood 0, Telford Shropshire, TF1 7YP, GB Telephone: Fax: mail: info-uk@viessmann.com 10 VISMANN VITORONDNS 200-T

VIESMANN VITODENS 222-F

VIESMANN VITODENS 222-F VISMNN VITONS 222- atasheet or part no. and prices: see pricelist VITONS 222- Type 2T as condensing storage combi boiler, 3.2 to 35. kw for natural gas and LP VITONS 222- Type 2S as condensing storage