Latest Ships built in Japan

Transcription

1 SUMITOMO HEAVY INDUSTRIES, LTD. Latest Ships built in Japan Ferry Tanker/Aframax Product carrier Bulk carrier/panamax PCC/PCTC Work vessel FERRY TOSHIMA BERGITTA MORNING EXPRESS WORLD RULE SIRIUS LEADER GOSHO

2 FERRIES FERRY TOSHIMA 1,389-GT Car Ferry FERRY TOSHIMA, an 86-meter long car ferry, was built at Uraga Works of Sumitomo Heavy Industries Ltd. and was delivered to Toshima Village in February The ship navigates at service speed of 19 knots, which enables it to make three round trips a week from Kagoshima via seven small islands to Naze of Amamioshima Island. 3. Two cargo gears of the stern ramp and 10-ton derrick are provided for shortening cargo handling time. 4. The stern ramp door connecting with the movable deck enables the loading and unloading of vehicles at various tidal levels and quay heights. 1. Twin controllable pitch propellers, twin high lift rudders and two bow thrusters are installed to achieve good maneuverability in narrow bays. 2. One set of fin stabilizer is provided for safe operation in rough seas. Length (o.a.) m Length (b.p.) m Breadth (mld.) m Depth (mld.) m Draft (mld.) m Gross tonnage... 1,389 Deadweight MT Main engine... DAIHATSU 8DKM-32(L) x 2 MCR... 2,940 kw x 720 / 200 rpm x 2 NOR... 2,500 kw x 682 / 189 rpm x 2 Speed (max. trial) knots (service) knots Complement passengers and 26 crew members Classification... Japanese Ministry of Transport Loading capacity (passengers) persons (container) (truck)... 3 (car)

3 TANKERS / AFRAMAX BERGITTA Double-Hull Aframax Tanker 38

4 The double-hull Aframax tanker BERGITTA was built at Yokosuka Shipyard of Sumitomo Heavy Industries, Ltd. and delivered to KS Bergitta in January BERGITTA is an Aframax tanker newly developed with Sumitomo s technology for safe, reliable and economical operation, and is in compliance with the latest requirements of SOLAS and MARPOL regulations. 10. Tin-free anti-fouling paint for underwater hull to prevent marine pollution. 11. Provision for emergency towing on bow and stern. 12. Fresh water firefighting system in accommodation space. 13. Loading computer system with on-line input device for cargo level. 1. Optimized hull form and high propulsive efficiency. 2. Hull structure of highest reliability. 3. Double-hull construction for fuel oil tanks as well as cargo oil tanks for prevention of oil pollution. 4. Cargo oil tanks and piping system in triple segregation groups to allow flexible cargo handling. 5. Large capacity cargo oil pump of 3,000 m Vapor Emission Control System (VECS) in compliance with USCG requirements. 7. Facility for pump-room safety in compliance with OCIMF/ISGOTT requirement. 8. Well designed ballast tank access for easy maintenance and inspection. 9. Impressed current cathodic protection system for underwater hull. Length (o.a.) m Length (b.p.) m Breadth (mld.) m Depth (mld.) m Draft (mld.) / m Gross tonnage... 56,207 Deadweight ,641 MT at m draft Main engine... DU-SULZER 6RTA58T MCR... 16,320 PS x rpm NOR... 14,690 PS x 99.4 rpm Speed (service) knots at m draft Complement Classification... DNV + 1A1, Tanker for Oil ESP, E0, VCS2, LCS (SI) Cargo pump... 3 x 3,000 m mag Handling gear... 15MT x 1 Loading capacity (tank) ,330 m 3 39

5 PRODUCT CARRIERS MORNING EXPRESS 84,994-dwt Product Oil Carrier The double-hull Aframax clean product carrier MORNING EXPRESS was built at Yokosuka Shipyard of Sumitomo Heavy Industries, Ltd. and delivered to Nakata Maritime Corporation in June The vessel is one of the biggest product oil carriers and categorized as LR-II type. Length (o.a.) m Length (b.p.) m Breadth (mld.) m Depth (mld.) m Draft (mld.) m Gross tonnage... 56,285 Deadweight... 84,994 MT Main engine... DU-SULZER 6RTA58T MCR... 16,320 PS x rpm NOR... 14,690 PS x 99.4 rpm Speed (service) knots Complement Classification... NK, NS*, Tanker, MNS*, (M0) Handling gear MT x 1 Cargo pump... 3 x 2,500 m 3 / hour Loading capacity (tank)...122,300 m 3 1. Cargo tank painting system and materials well suited for carrying clean product oil and crude oil. 2. Anti-corrosion measures by heavy tar epoxy coating with back-up anodes in water ballast tanks for less maintenance. 3. Large cargo tank capacity of triple-segregation groups for flexible cargo handling. 4. VECS (Vapor Emission Control System) to prevent air pollution during cargo handling. 5. SILD (Sumitomo Integrated Lammeren Duct) on the stern frame to save fuel, to improve maneuverability and to reduce hull vibrations. 6. Fixed flammable gas detection system in water ballast tanks adjacent to cargo oil tanks. 64

6 BULK CARRIERS / PANAMAX WORLD RULE Panamax Bulk Carrier Sumitomo Heavy Industries, Ltd. has completed the large capacity Panamax bulk carrier WORLD RULE at its Yokosuka Shipyard in February Length (o.a.) m Length (b.p.) m Breadth (mld.) m Depth (mld.) m Draft (mld.) / m Gross tonnage... 38,364 Deadweight... 73,744 MT at m draft Main engine... DU-SULZER 7RTA48T MCR... 12,070 PS x rpm NOR... 10,260 PS x rpm Speed (max. trial) knots (service) knots at m draft Complement Classification... NK, NS*, MNS*, M0 Bulk Carrier, Nos. 2, 4 and 6 holds may be empty Loading capacity (grain)... 87,298 m3 1. Seven cargo holds (including No.4 floodable hold), allowing alternate ore loading. 2. Large hatch openings with side-rolling hatch covers. 3. Equipped with an energy saving duct (SILD; Sumitomo Integrated Lammeren Duct) which produces sufficient thrust to propel the vessel with less fuel. 4. Automated engine room machinery and deck machinery. 5. Mono-fuel system for main engine and generator engines. 92

7 PCC / PCTC SIRIUS LEADER 5,300-unit Pure Car and Truck Carrier Sumitomo Heavy Industries, Ltd. delivered the SIRIUS LEADER, a 5,300-unit pure car and truck carrier, to Estrella Shipholding S.A. in July The vessel carries passenger cars, transporters, buses, trucks, dump trucks, and complete knockdown parts (CKD). 1. The vessel has twelve car decks including three liftable car decks. Liftable car decks are operated by self-rolling deck lifters. 2. The vessel has one stern ramp and one side ramp for car loading and unloading. The particulars of shore ramps are as follows, Stern ramp : 35 m long (incl. the flap) x 8 m wide, total load 100 MT Side ramp : 20 m long (incl. the flap) x 4.2 m wide, total load 15 MT 3. Electric motor-driven bow thruster of 1,300 kw and stern thruster of 770kW are installed. Length (o.a.) m Length (b.p.) m Breadth (mld.) m Depth (mld.) m Draft (mld.) m (designed draft) 9.60 m (summer loaded dr aft) Gross tonnage... 54,382 Deadweight...16,451 MT (summer loaded dr aft) Main engine... DU-SULZER 7RTA62 MCR (BHP)... 13,540 kw x rpm NOR (BHP)... 12,190 kw x rpm Speed (service) knots with 20 % S.M. Complement Classification...NK, NS* (Vehicles Carrier), MNS* (M0) Shore ramp... Stern ramp x 1, Side r amp x 1 Car stowage capacity...5,300 passenger cars 4. The vessel satisfies the SOLAS 90 amendments, Subdivision and Damage stability of Cargo Ships. 148

8 WORK VESSELS GOSHO 200 m3 Grab Dredger 176

9 Sumitomo Heavy Industries, Ltd. has completed the world largest grab dredger GOSHO and delivered to Kabushiki Kaisha Kojimagumi in May The dredger is a sister vessel of TOSHO, delivered in 1995, with some improvements. 1. The dredger realizes the large scale and economical dredging by the self-contained electro-hydraulic grab bucket and hydraulically operate counterweight balanced lifting / lowering system, patented by Kojimagumi. 2. Strong seizing power of the electro-hydraulic grab bucket realizes hard soil dredging. 3. Control system for level seizing minimizes roughness of seabed and realizes efficient dredging. 4. Travelling spud system without anchors and mooring lines, patented by Kojimagumi, eliminates anchoring work and minimizes working area. 5. Operation system of the dredger including mooring system is controlled from a remote operation room in a unified way. Length (o.a.) m Breadth (mld.) m Depth (mld.) m Draft (mld.) m Main generator, diesel driven... 3 sets - 2,400 kw, AC 3,300V Aux. Generator, diesel driven...1 set kw, AC 450V Dredging capacity: Max. dredging capacity... 6,000 m 3 / h Hoisting capacity t Dredging depth m Hoisting speed... 46~66 m / min. Lowering speed m / min. Slewing radius m Slewing speed rpm Grab buckets: Medium type Capacity m 3 Self weight t Heavy type Capacity m 3 Self weight t 6. Dredge monitoring system which consists of 3-dimensional seabed profiler, kinematic GPS system, etc. realizes highly efficient and precise dredging. 177