RH340B. Hydraulic Mining Excavator RH340B HYDRAULIC MINING EXCAVATOR. General Data: Features. Product Specification Sheet.

Size: px
Start display at page:

Download "RH340B. Hydraulic Mining Excavator RH340B HYDRAULIC MINING EXCAVATOR. General Data: Features. Product Specification Sheet."

Transcription

1 RH0B Hydraulic Mining Excavator,00 ( General Data: Operating Weight,00 (,0 (0, (,00 (,00 (,0 (,0 (,00 ( Features,000 ( 0,0 (,000 ( 0 TriPower shovel attachment,0 (,0 ( RH0B HYDRAULIC MINING EXCAVATOR Face Shovel t sht Backhoe t sht Engine Output SAE J Caterpillar C,0 kw,000 HP Cuins QSK,0 kw,000 HP Standard Bucket Capacity Face Shovel (SAE :).0 m. yd Backhoe (SAE :).0 m. yd Independent oil cooling system Spacious walk-through machine house -circuit hydraulic system Electronic-hydraulic servo control Board Control System (BCS) Torque control in closed-loop swing circuit Automatic central lubrication system Xenon working light Product Specification Sheet

2 Operating Weight Shovel Standard track pads Operating weight Ground Pressure Further track pads on request Backhoe Standard track pads Operating weight Ground Pressure Further track pads on request Electrical System (diesel drive) System voltage Batteries in series / parallel installation Working spot lights Diesel Engines Engine Features,00 (,00 kg (,,0 lb). N/cm (. psi),00 (,00 kg (,, lb). N/cm (. psi) Hydraulically driven radiator fan with electronically controlled fan speed Microprocessed engine management Automatic rev. reduction Heavy-duty air filters, STRATA with automatic dust evacuation Two-stage fuel filter incl. water separator Additional high-capacity water separator Pre-lube starting system (Cuins engines only) Eliminator with centrifuge for engine oil filtration (Cuins engines only) V x Ah - V each Ah - V in total x high brightness Xenon lights Battery isolation relays Emergency stop switches accessible from ground level and in engine module Hydraulic Oil Cooling Oil flow of cooling pumps Diameter of fans x l/min ( x US gal/m x,0 ( x Cooling system is fully independent of all main circuits, i.e. controlled cooling capacity is available whenever engine is running Gear-type cooling pumps supplying high-volume, low-pressure oil to fans and aluminium coolers Fan speed and flow of oil to the coolers are thermostatically controlled Extremely high cooling efficiency to ensure optimum oil temperature Version - Caterpillar Make and model Hydraulic System with PMS Main pumps Max. oil flow Max. pressure, attachment Max. pressure, travel Swing pumps Max. oil flow Max. pressure, swing circuit Total volume of hydraulic oil Hydraulic tank capacity x Caterpillar C Total rated net power ISO 0/,0 kw (,000 HP),00 min - Total rated net power SAE J,0 kw (,000 HP),00 min - Total rated gross power SAE J,0 kw (,000 HP),00 min - No. of cylinders (each engine) Bore Stroke Displacement Aspiration Max. altitude without deration 0 (. (.. l (, in³) Turbocharged and charge air-cooled,0 m (,000 ) a.s.l. Emission certification US EPA CARB Tier Alternators Fuel tank capacity Version - Cuins x 0 A,0 l (, US gal) Make and model x Cuins QSK Total rated net power ISO 0/,0 kw (,000 HP),00 min - Total rated net power SAE J,0 kw (,000 HP),00 min - Total rated gross power SAE J,0 kw (,000 HP),00 min - No. of cylinders (each engine) Bore Stroke Displacement Aspiration Max. altitude without deration (. 0 (. l (, in³) Turbocharged and aercooled, m (,000 ) a.s.l. Emission certification US EPA CARB Tier Alternators Fuel tank capacity x A,0 l (, US gal) x swash plate double pumps x,00 l/min ( x US gal/m MPa = 0 bar (,0 psi) MPa = 0 bar (,0 psi) x reversible swash plate pumps x l/min ( x US gal/m MPa = 0 bar (,00 psi) approx.,00 l (, US gal) approx.,0 l (, US gal) Pump Managing Systems (PMS) contains: Electronic load limit control Flow on demand from main pumps depending on joystick position Automatic regulation of main pumps to zero flow without demand Automatic rpm reduction of engine speed during working breaks Reduced oil flow of main pumps at high hydraulic oil temperature orat high engine temperature Pressure cut-off for main pumps Cooling of pump transmission gear oil Filters: Full-flow high-pressure filters (0 μm) for the main pumps, installed directly behind each pump High pressure filters 0 μm) for the closed swing circuit Full-flow filters ( μm) for the complete return circuit Pressure filters (0 μm and μm) for servo circuit Pressure filters (0 μm) for the feed pumps of the closed swing circuit Transmission oil filters (0 μm)

3 Undercarriage Travel speeds ( stage) Max. tractive force Operator s Cab Operator s eye level Internal dimensions cab st stage nd stage Max.. km/h (0. mph) Max..0 km/h (. mph),0 kn ( t =,0 lb) Gradability of travel drives Max. % Track pads (each side) Bottom rollers (each side) Support rollers (each side) plus a skid plate in between Travel drives (each side) planetary transmission with two-stage axial piston motors Parking brakes Wet multiple-disc brake, springapplied / hydraulically released Cast double-grouser combined pad links with bushings connected by hardened full floating pins All running surfaces of sprockets, idlers, rollers and pad links as well as teeth contact areas of sprocket and pad links are hardened Fully hydraulic self-adjusting track tensioning system with membrane accumulator Automatic hydraulic retarder valve to prevent over-speed on downhill travel Acoustic travel alarm approx.. m (,00 (,00 (,0 ( Pneumatically cushioned and multi-adjustable comfort seat with lumbar support, safety belt, head and arm rests Switch in seat cushion to neutralize automatically the hydraulic controls when operator leaves the seat Joystick controls integrated in independently adjustable seat consoles Fold-away auxiliary seat with safety belt FOPS (rock guard; approved acc. to DIN ISO ) integrated into cab structure All-round safety glass, armoured windshield and sliding side window Windshield with parallel intermittent wiper/washer Roller blind at windshield Robust instrument panel incl. large colored BCS screen with transflective technology Board Control System (BCS) electronic monitoring and data logging system for vital signs and service data of engines, hydraulic and lubrication system Machine access via retractable boarding ladder, hydraulically operated Sliding emergency ladder (kick-down type) with ladder cage Swing System Swing Drives Parking Brakes Max. swing speed Swing ring Attachments compact planetary transmissions with axial piston motors Wet multiple disc brake, spring loaded / hydraulically released. rpm Triple-race roller bearing with sealed internal gearing Closed-loop swing circuit with torque control Hydraulic braking of the swing motion by counteracting control All raceways of swing ring as well as grease bath for internal gearing supplied by automatic central lubrication system Automatic Lubrication System Capacity of grease container,000 l ( US gal) Dual-circuit system with hydraulically driven heavy-duty pump and electronic time relay control to adjust the pause/lube times Connected to the lubrication system are the swing roller bearing with internal gearing and all pivot points of attachment, bucket and cylinders System failures displayed by Board Control System Grease filters 0 μm) between service station and container as well as directly behind grease pump Retractable Service Station Retractable service station installed underneath the engine module and easily accessible from ground. Equipped with: Quick couplings for: Diesel fuel Engine coolant - le / right Pump transmission gear oil - le / right Engine oil (oil pan) - le / right Engine oil (additional tank - optional) - le / right Hydraulic oil tank Grease container CAT jump-start socket Indicator lights for fuel tanks le / right full and grease container full Booms and sticks are torsion-resistant, welded box design of hightensile steel with massive steel castings at pivot areas Welding procedures allow for internal counter-welding (double prep weld) wherever possible Booms and sticks are stress-relieved aer welding Catwalks with rails at booms Inspection holes in booms (FS & BH) and stick (FS only) Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve Shovel attachment with patented TriPower kinematics ensuring the following main features: Horizontal automatic constant-angle bucket guidance Vertical automatic constant-angle bucket guidance Automatic roll-back limiter to prevent material spillage Kinematic assistance to hydraulic forces Constant boom momentum throughout the whole li arc Crowd force assistance All buckets (FS and BH) are equipped with a universal wear package suitable for all standard applications, which consists of: Special liner material covering main wear areas inside and outside of bucket Lip shrouds between teeth Wing shrouds on side walls Heel shrouds at bottom edges Special wear packages for highly abrasive materials on request

4 TriPower Face Shovel Attachment (FS) Working Diagram - Boom.0 m ( - Stick. m ( m 0 0 sht 0 m Working Range Max. digging height. m 0 in Max. digging reach. m in Max. digging depth. m in Max. dumping height. m in Crowd distance on level. m in Digging Forces Max. crowd force,0 kn 0,00 lb Max. crowd force at ground level,0 kn,0 lb Max. breakout force,0 kn,0 lb Face Shovels Type Iron ore shovel Heavy rock shovel Heavy rock shovel Heavy rock shovel Standard rock shovel Tooth system ESCO Posilok S 0 ESCO Posilok S 0 ESCO Posilok S 0 ESCO Posilok S 0 ESCO Posilok S 0 Capacity SAE / PCSA :. m Capacity SAE / CECE :.0 m.0 yd. m. yd.0 m. yd.0 m 0. yd.0 m. yd. yd. yd.0 m. m. yd 0. yd. yd.0 m.0 m Total width,00 (,00 (,00 (,00 (,00 ( Inner width,00 (,00 (,00 (,0 (,0 ( Opening width,00 (,00 (,00 (,00 (,00 ( No. of teeth Weight incl. wear kit,00 kg,0 lb,00 kg,0 lb,00 kg 0,0 lb 0,0 kg,0 lb 0,00 kg,0 lb Max. material density (loose).0 t/m,00 lb/yd. t/m,0 lb/yd. t/m, lb/yd.0 t/m,0 lb/yd. t/m,00 lb/yd

5 Backhoe Attachment (BH) Working Diagram - Boom. m ( - Stick.0 m ( m sht 0 0 m Working Range Max. digging depth. m in Max. digging reach. m 0 in Max. digging height. m in Digging Forces Max. crowd force,0 kn, lb Max. breakout force,0 kn,0 lb Backhoes Type Heavy rock bucket Standard rock bucket Tooth system ESCO Posilok S ESCO Posilok S Capacity SAE :.0 m³ (. yd³).0 m³ (. yd³) Capacity CECE :. m³ (. yd³) 0. m³ (. yd³) Capacity struck. m³ (. yd³). m³ (. yd³) Total width,0 (,00 ( Inner width,00 (,00 ( No. of teeth Weight incl. universal wear kit,00 kg (,0 lb),00 kg (,0 lb) Max. material density (loose). t/m³ (, lb/yd³). t/m³ (.00 lb/yd³)

6 General Packing List Crawler side frame ( units) Undercarriage center frame with swing roller bearing,0 ( 0,00,0 (,0 (,0 ( 0 ( 0 ( 0 ( Engine module with diesel engines,000 ( ) Gross weight,00 kg (,0 lb),00 (,00 (,00 (,00 (,00 (,00 ( Oil cooler module,00,00 ( (,000 ( Gross weight,0 kg (,0 lb),00 (,00 (,0,000 ( Gross weight,00 kg (,0 lb),00 (,00 (,00 (,00 (,00,00 ( (,00 (,00 (,000 (,000 ( Counterweight Gross weight Lower part,000 ( ),00 kg (,0 lb),0 (,0 (,0 (,0 ( Upper Part,000 ) ( 0,000 kg (,0 lb),0 (,0 (,00 (,00 (,0 (,0 (,0,0 ( (,0,0 ( (,0 (,0 (,0 (,0 ( Crates Content Gross Weight Radiators with fan: (,0 (,0 (,0 kg (,0 lb) Four swing gear,0 (,0 (,00 (,0 kg (,0 lb) Swing ring cover,00 (,00 (,00 ( 0 kg (0 lb) Swing ring bolts, ladder platform, etc.,00 (,00 (,0 (,00 kg (,0 lb) Catwalks and other parts,0 (,00 (,0 (,00 kg (,00 lb) Grease container with pump,00 (,00 (,0 (,00 kg (, lb) Air filters, mufflers,000 (,0 (,0 ( 0 kg (,0 lb) Retactable ladder (on pallet),00 (,000 (,0 (,0 kg (, lb) Barrels (hydraulic oil),00 (,00 (,0 (,00 kg (,0 lb) Barrels (engine oil; antifreeze; grease),00 (,00 (,0 (,0 kg (,00 lb),00 (,0 ( Crate with cabin and FOPS,0 (,0 (,0,0,000,000 ( (,0,0 (,0 ( (,0 (,0 (,0,0,00 (,000 (,000 (,000 (,00,00 (,00 ( (,00,00 (,00,00 (,0,0,0 Cab pedestal module,00 (,00 (,00,00,00,00,00,00,00 (,0 (,0 (,00 (,00 (,00 (,00 (,0 (,0 ( 0 ( 0 (,00 (,00 (,0 ( Gross weight QSK,0 kg (,0 lb),00,00 ( ( Gross weight C,00 kg (,0 lb),0,0 ( ( 0 ( 0 (,0 (,0,0 (,0 ( (,0 (,0 (,00 (,00 (,00 Gross weight kg (,0) ( Superstructure center frame,00 (,0 ( 0 (,00,00 ( (,00 (,00 (,00 (,0 (,0 (,0 ( Gross weight (each),00 kg (,0 lb),00 ( (,00 ( ( ( tracks consisting of pad links; each: Gross weight,00 kg (,0 lb),0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 (,0,0 (,0 (,0 ( ( ( (,0 ( (,0 (,00 ( (,00,00 (,0 (,0 (,0,0 (,0 ( (,0 (,0 ( Gross weight,00 kg (,00 lb)

7 TriPower Shovel Attachment,00 ( ),0 (,000,000 ( (,000 (,0 ( ),0 ( ),0,0 ( ) ( ),0,0 0 0,0,0 00,0 0,00 (,00 kg (,0 lb),0,0 ( ) ( ),00,00 ( (,00,00 ( (,00 (,00 (,00 (,00,00,00 ( (,00 ( ( Gross weight,00,00 (,00 (,0 ( ),0 ( ) Gross Weight,00 ( ),00 ( ) ( ( ( ( ( ( ( ( ( ( (.0m (. yd ),0 0,0 0 Crates with,0 catwalks, railings and other parts,0 0 0,0,0 00,000 (,000 (,000 ( stck Face shovel incl. pin for,000 (,000,000 ( ( Capacity (:) Gross weight,00 kg (,0 lb),0 (,0 (,00,00 ( ) ( ),000,000 ( (,0 ),0 ),0 )),0,0,0,0 )) ) ),0,0 ),0 ),0 ) Gross weight,00 kg (,0 lb),0 ( ),0 ( ) Stick,0 (,0 (( (,0,0,0,0,0 ( ( (,0,0 ( ( Boom with main valve block, TriPower linkages and rods,00 kg (,0 lb),00,00 ) ) Bundles with boom cylinders, each: Stick with linkage and bucket cylinders 00 (,0 (,0 (,0 ( (( 00 ( (( 00 (( ( 00 (,0,0 ( (,0,0 ( (,0 (,0 (,0 (,0,0 ( (,0 (,0 ( Backhoe Attachment 00 00,00 (,00 ( 00 ( 00 ( Gross weight,0 kg (,0 lb) Gross weight,00 kg (0,0 lb),00,00 ( (,00,00 ( (,00 (,00 (,00 (,00,00 ( (,00 (,00 ( Stick with linkage and,00,00 bucket cylinders,000 (,0 (,0,0 ( ( Crates,0,0 ( (,0 (,0 (,0 (,0,0,0 ( ( (,0 ( with main value block, catwalks, ( (,00 (,00 (,00 (,00 (,00,00,00 ( ( (,00,00 ( ( stick and linkage Gross weight,00 kg (0,0 lb),000 (,000 (,00,00 ( (,00 (,00 (,00 (,00,00 ( (,00 (,00 ( for Backhoe bucket incl. pins,00 (,00 (,00 (,00 (,00 ( ),00 ( ) Gross weight,00 kg (, lb) ( (( ( ( ( ( ( ( Monoboom without main valve block,0,0 (( railings and other parts Gross weight Gross weight m (. yd),0 (,000 kg (,0 lb),00 (,0 (,00 (,00 kg (,00 lb),0,0 ( (,0 (,0 (,0 (,0 (,0 (,0,0 ( (,00 (,00 (,0 kg (,0lb),0,0 ( (,0 ( ),00,00 ( (,0,0,00,00 ( ) ( ),0,0,0,0,0,0,0,0,0 Capacity (:) pallets with boom cylinders, 00 each: ( pallets with stick cylinders, 0 each 0 ( ( 00 ( 00 (,0,0,0,0,0,0,0,0,0,0,0 00 ( Gross weight,00 kg (,0 lb) (( 00 ( ( 00 (( 00 ( ((,00,00 ( (,00,00 ( (,00 (,00 (,00 (,00,00 ( (,00 (,00 ( Gross weight,00 kg (,0 lb) 0 0 (( 0 ( ( 0 (( 0 ( ((

8 Component accessibility on superstructure. Diesel Engines. Oil coolers. Rotary distributor. Operator s seat. Gearboxes with hydraulic pumps. Hydraulic tank. Travel valves. BCS tower. Engine radiators with hydraulically driven fan. Swing drives. Switch cabinet and battery box. Auxilliary seat Sketch not to scale. Anti-slip catwalks Anti-slip walking areas Optional Equipment General Export crating Finishing as per end user s corporate colors Customizing of logos as per customer s specification Superstructure Hydraulic service crane on superstructure with auxilliary engine Mesabi radiators instead of standard radiators Oil change interval extension for engine oil up to 00 hrs (Cuins engines only) Folding access stairway, stairway angle approx. Round container with a standard 00 l grease barrel (instead of,000 l grease container) Lubricated pinion for greasing of internal gearing of swing ring Various cold-weather packages Further optional equipment on request Cab Emergency exit harness kit Various heating and air-conditioning systems Roller blinds at all windows Rear windscreen wiper BCS data-transfer system via radio Additional instrumentation Undercarriage Track pad width,00 or,00 Automatic lubrication of rollers by central lube system Cover plate under carbody (belly plate) Attachment Guards for shovel cylinders of FS-attachment Xenon lighting on boom Special wear packages Effective Date: February 0. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to appropriate Operator s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Bucyrus makes no other warranty, express or implied. Bucyrus is a registered trademark of Bucyrus International, Inc. in the USA and many other countries. Copyright 0 Bucyrus International, Inc.

RH170B. Hydraulic Mining Excavator RH170B HYDRAULIC MINING EXCAVATOR. General Data: Features. Product Specification Sheet.

RH170B. Hydraulic Mining Excavator RH170B HYDRAULIC MINING EXCAVATOR. General Data: Features. Product Specification Sheet. RH0B Hydraulic Mining Excavator,0 ( General Data:,00 4 ( ),000 ( 0,80 ( ) (,0 (8,0 (8,00 ( Features 80 (,00 (,0 0,00 ( 8,80 ( RH0B HYDRAULIC MINING EXCAVATOR Operating Weight TriPower shovel attachment

More information

RH200. Hydraulic Mining Excavator RH200 HYDRAULIC MINING EXCAVATOR. General Data: Features. Product Specification Sheet.

RH200. Hydraulic Mining Excavator RH200 HYDRAULIC MINING EXCAVATOR. General Data: Features. Product Specification Sheet. RH00 Hydraulic Mining Excavator 7,600 ( General Data: ( 0 8,0 (8 0 7,80 ( 7,0 (,80 (8 6,60 (,780 (9,00 ( 7 Features 7,000 ( 0,0 ( 8 7,000 ( 0 8,70 (8 8 8,760 (8 9 RH00 HYDRAULIC MINING EXCAVATOR Operating

More information

6060/6060 FS. Cat. Electric Drive Hydraulic Shovel. Specifications

6060/6060 FS. Cat. Electric Drive Hydraulic Shovel. Specifications Cat 6060/6060 FS Electric Drive Hydraulic Shovel Specifications Operating Weight Shovel Standard track pads 1 400 mm (4 ft 7 in) Operating weight 42 300 kg (1,19,0 lb) Ground Pressure 24.3 N/cm2 (3.1 psi)

More information

RH120E. Hydraulic Mining Excavator RH120E HYDRAULIC MINING EXCAVATOR. General Data: Features. Product Specification Sheet.

RH120E. Hydraulic Mining Excavator RH120E HYDRAULIC MINING EXCAVATOR. General Data: Features. Product Specification Sheet. RH120E Hydraulic Mining Excavator 6,00 mm (21 ft 4 General Data: Operating Weight 6,000 mm (19 ft 8 7,640 mm (2 ft 1 6,40 mm (21 ft 2 6, mm (20 ft 8 4,90 mm (16 ft 2, mm (7 ft 1 1,940 mm (6 ft 4 1,000

More information

6060/6060 FS. Hydraulic Shovel. Operating Weight. General Data. Features

6060/6060 FS. Hydraulic Shovel. Operating Weight. General Data. Features 00/00 FS Hydraulic Shovel General Data Operating Weight Face Shovel 9 tonnes tons Backhoe 0 tonnes 8 tons Engine output SAE J99 Cat 3C Standard bucket capacity Face Shovel (heaped :) Backhoe (heaped :)

More information

6018/6018 FS. Cat. Hydraulic Shovel. Specifications. General Data Operating weight. Operating Weight Shovel

6018/6018 FS. Cat. Hydraulic Shovel. Specifications. General Data Operating weight. Operating Weight Shovel Cat 6018/6018 FS Hydraulic Shovel Specifications General Data Operating weight Face Shovel Backhoe 177 tonnes 19 tons 181 tonnes 200 tons Engine output SAE J 199 Cat C18 88 kw 1,10 HP Standard bucket capacity

More information

Hydraulic Mining Excavator RH170B

Hydraulic Mining Excavator RH170B Hydraulic Mining Excavator RH170B 7,000 mm 2 6,780 mm 22 7,200 mm 2 7 6,0 mm 20 6,70 mm 22 2 7,870 mm 2 2,200 mm 7,60 mm 18 2,60 mm 8 980 mm 6,200 mm 20 4 8,070 mm 26 6 1,200 mm 11 6,600 mm 21 8 RH170B

More information

6050/6050 FS. Cat. Hydraulic Shovel. Specifications. Electrical System (diesel drive) System voltage 6 x 210 Ah - 12 V each

6050/6050 FS. Cat. Hydraulic Shovel. Specifications. Electrical System (diesel drive) System voltage 6 x 210 Ah - 12 V each Cat 6050/6050 FS Hydraulic Shovel Specifications Electrical System (diesel drive) System voltage Batteries in series / parallel installation Alternators Working spot lights 24 V 6 x 210 Ah - 12 V each

More information

Hydraulic Mining Excavator RH 120-E

Hydraulic Mining Excavator RH 120-E Hydraulic Mining Excavator RH 120-E 6,40 mm 21 2 6,3 mm 20 8 6,390 mm 23,300 mm 17 6,00 mm 21 4 4,90 mm 16 3 7,600 mm 24 11 2, mm 7 1 1,940 mm 6 4 880 mm 2 11 6,000 mm 19 8 7,640 mm 2 1 1,000 mm 3 3,800

More information

Hydraulic Mining Excavator RH 90-C

Hydraulic Mining Excavator RH 90-C Hydraulic Mining Excavator RH 90-C,890 mm 19 4,7 mm 18 3 6,12 mm 20 1,080 mm 16 8,400 mm 17 9 4,37 mm 14 4 6,40 mm 21 2,01 mm 6 7 1,89 mm 6 3 1,000 3 3, mm 18 1 7, mm 23 800 mm 2 7,300 mm 17 RH 90-C General

More information

6030/6030 FS. Cat. Hydraulic Shovel. Specifications

6030/6030 FS. Cat. Hydraulic Shovel. Specifications Cat 6030/6030 FS Hydraulic Shovel Specifications General Data Operating weight (with C27 engine) Face Shovel 287 tonnes 316 tons Backhoe 290 tonnes 319 tons Engine output SAE J 199 Cat C27 1 140 kw 1,30

More information

Hydraulic Mining Excavator RH 90-C

Hydraulic Mining Excavator RH 90-C Hydraulic Mining Excavator RH -C, mm, mm, mm, mm, mm, mm, mm, mm, mm, mm, mm, mm, mm RH -C General Data: Operating weight Face Shovel Backhoe Features: Twin engine concept t t sht sht TriPower shovel attachment

More information

Features 1,740 5'9" 4,800 mm N/cm² 25.7 psi Track pads option 29 ½. 4,950 mm N/cm² 20.9 psi Track pads option (on request) 35 ½

Features 1,740 5'9 4,800 mm N/cm² 25.7 psi Track pads option 29 ½. 4,950 mm N/cm² 20.9 psi Track pads option (on request) 35 ½ RH 70 Hydraulic Mining Excavator General Data Operating weight Backhoe 122 t 134 sht Engine output SAE J 199 22 kw 700 HP Standard backhoe capacity (SAE 1:1) Standard rock bucket 7.2 m³ 9.4 yd³ Mass excavation

More information

RH 340. Hydraulic Mining Excavator

RH 340. Hydraulic Mining Excavator RH 0 Hydraulic Mining Excavator General Data Operating weight Face shovel t 08 sht Backhoe t 0 sht Engine output SAE J 99,880 kw,0 HP optional,0 kw,000 HP Standard bucket capacity Face shovel (SAE :).0

More information

6090 FS. Hydraulic Shovel. General Data. Operating Weight. Features

6090 FS. Hydraulic Shovel. General Data. Operating Weight. Features 6090 FS Hydraulic We understand the challenges you face, the importance of reliability, and the relationship between uptime and productivity. That s why we continually strive to produce the safest, most

More information

6060 AC/ 6060 AC FS. Hydraulic Shovel. Operating Specifications. Electric Motor Standard Bucket Capacity AC/6060 AC FS Features

6060 AC/ 6060 AC FS. Hydraulic Shovel. Operating Specifications. Electric Motor Standard Bucket Capacity AC/6060 AC FS Features 6060 AC/ 6060 AC FS Hydraulic Shovel We understand the challenges you face, the importance of reliability, and the relationship between uptime and productivity. That s why we continually strive to produce

More information

6050/6050 FS. Hydraulic Shovel. Engine*

6050/6050 FS. Hydraulic Shovel. Engine* 6050/6050 FS Hydraulic Shovel Engine* Engine Model 2 Cummins K1500E or 2 Cummins QSK 38 Gross Power SAE J1995 1880 kw 2,520 hp Net Power SAE J1349 1880 kw 2,520 hp *Electric drive option available (1600

More information

PC3000. PC3000 Super Shovel HYDRAULIC SHOVEL. OPERATING WEIGHT ton 551, ,000 lb SHOVEL CAPACITY 15 m yd 3 SAE 2:1 heaped

PC3000. PC3000 Super Shovel HYDRAULIC SHOVEL. OPERATING WEIGHT ton 551, ,000 lb SHOVEL CAPACITY 15 m yd 3 SAE 2:1 heaped OPERATING WEIGHT 250 258 ton 551,500 569,000 lb SHOVEL CAPACITY 15 m 3 19.5 yd 3 SAE 2:1 heaped PC3000 Super Shovel BACKHOE CAPACITY 15 m 3 19.5 yd 3 SAE 1:1 heaped HYDRAULIC SHOVEL PC3000 PC3000 Super

More information

6060/6060 FS. Hydraulic Shovel. Engine*

6060/6060 FS. Hydraulic Shovel. Engine* 6060/6060 FS Hydraulic Shovel Engine* Engine Model 2 Cat 3512C Gross Power SAE J1995 2240 kw 3,000 hp Net Power SAE J1349 2240 kw 3,000 hp *Electric drive option available (1800 kw) on 6060 AC/6060 AC

More information

HYDRAULIC SHOVEL. PC Super Shovel. OPERATING WEIGHT ton 556, ,000 lb SHOVEL CAPACITY 15 m yd 3 SAE 2:1 heaped

HYDRAULIC SHOVEL. PC Super Shovel. OPERATING WEIGHT ton 556, ,000 lb SHOVEL CAPACITY 15 m yd 3 SAE 2:1 heaped OPERATING WEIGHT 252-265 ton 556,000-584,000 lb SHOVEL CAPACITY 15 m 3 19.5 yd 3 SAE 2:1 heaped PC3000-6 Super Shovel BACKHOE CAPACITY 15 m 3 19.5 yd 3 SAE 1:1 heaped PC 3000 HYDRAULIC SHOVEL Photo may

More information

6040/6040 FS. Hydraulic Shovel

6040/6040 FS. Hydraulic Shovel 6040/6040 FS Hydraulic Shovel Engine* Bucket Engine Model 2 Cat C32 Bucket Capacity Front Shovel (heaped 2:1) 22.0 m 3 28.8 yd 3 Gross Power SAE J1995 1516 kw 2,032 hp Bucket Capacity Backhoe (heaped 1:1)

More information

Technical Description R 9350 Hydraulic Excavator

Technical Description R 9350 Hydraulic Excavator Technical Description R 9350 ydraulic Excavator litronic` Operating Weight with Backhoe Attachment 302,0 t/665,800 lb Operating Weight with Shovel Attachment 310,0 t/683,400 lb Engine Output 1120 kw (1500

More information

PC8000 Super Shovel. PC8000 Super Shovel HYDRAULIC MINING SHOVEL SPECIFICATIONS

PC8000 Super Shovel. PC8000 Super Shovel HYDRAULIC MINING SHOVEL SPECIFICATIONS PC8000 Super Shovel Operating Weight 720 t 1,600,000 lb Shovel Capacity 38 m 3 50 yd 3 SAE 2:1 heaped Main Drive Diesel 3000 kw 4,020 HP Electric 2900 kw PC8000 Super Shovel SPECIFICATIONS HYDRAULIC MINING

More information

Hydraulic Excavator PC 3000

Hydraulic Excavator PC 3000 Engine Power 940 kw / 1260 HP @ 1800 rpm operating weight 20 261 ton / 11,300 7,00 Ib shovel capacity 16 m 3 21 yd 3 SAE 2:1 heaped backhoe capacity 1 m 3 19. yd 3 SAE 1:1 heaped PC3000-6 Loading Shovel

More information

Hydraulic Excavator PC 5500

Hydraulic Excavator PC 5500 Engine Power 2 x 940 kw / 120 HP @ 1800 rpm operating weight 33 2 ton / 1,17,200 1,217,100 Ib shovel capacity 29 m 3 38 yd 3 SAE 2:1 heaped backhoe capacity 29 m 3 38 yd 3 SAE 1:1 heaped PC00- Loading

More information

6060/6060. Hydraulic Shovel. Bucket Capacity Backhoe (heaped 1:1) 44.5 yd3. Operating Specifications

6060/6060. Hydraulic Shovel. Bucket Capacity Backhoe (heaped 1:1) 44.5 yd3. Operating Specifications 6060/6060 FS Hydraulic Shovel Engine* Engine Model Gross Power SAE J1995 Net Power SAE J1349 2 Cat 3512C 2240 kw 3,000 hp 2240 kw 3,000 hp *Electric drive option available (1800 kw) on 6060 AC/6060 AC

More information

R 994 B. Technical Description Hydraulic Excavator

R 994 B. Technical Description Hydraulic Excavator Technical Description ydraulic Excavator Operating Weight with Backhoe Attachment 654,330 lb Operating Weight with Shovel Attachment 675,500 lb Engine Output 1500 P Bucket Capacity 20.0 23.5 cuyd Shovel

More information

HYDRAULIC SHOVEL. PC Super Shovel. OPERATING WEIGHT ton 1,540,000-1,590,000 lb SHOVEL CAPACITY 42 m 3 55 yd 3 SAE 2:1 heaped

HYDRAULIC SHOVEL. PC Super Shovel. OPERATING WEIGHT ton 1,540,000-1,590,000 lb SHOVEL CAPACITY 42 m 3 55 yd 3 SAE 2:1 heaped OPERATING WEIGHT 700-720 ton 1,540,000-1,590,000 lb SHOVEL CAPACITY 42 m 3 55 yd 3 SAE 2:1 heaped PC8000-6 Super Shovel BACKHOE CAPACITY 42 m 3 55 yd 3 SAE 1:1 heaped PC 8000 HYDRAULIC SHOVEL Photo may

More information

EX SPECIFICATIONS

EX SPECIFICATIONS EX8000-6 SPECIFICATIONS S H O V E L B U C K E T C A P A C I T Y ( H E A P E D ) : SAE(2:1): 52.3 YD. 3 (40.0 M 3 ) O P E R A T I N G W E I G H T: LOADING SHOVEL 1,787,900 LB. (811 000 KG) R A T E D P O

More information

Hydraulic Excavator PC 8000

Hydraulic Excavator PC 8000 Engine Power 2 x 1500 kw / 2010 HP @ 1800 rpm operating weight 752 771 ton / 1,58,200 1,700,100 Ib shovel capacity 42 m 3 55 yd 3 SAE 2:1 heaped backhoe capacity 42 m 3 55 yd 3 SAE 1:1 heaped PC8000- Loading

More information

Hydraulic Excavator. PC Loading Shovel PC Backhoe PC 7000

Hydraulic Excavator. PC Loading Shovel PC Backhoe PC 7000 Engine Power 2 x 1250 kw / 175 HP @ 1800 rpm operating weight 7 94 ton / 1,490,00 1,530,300 Ib shovel capacity 3 3 m 47 yd3 SAE 2:1 heaped backhoe capacity 3 3 m 47 yd3 SAE 1:1 heaped PC7000- Loading Shovel

More information

With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES

With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES 1 Specifications R145LCR-9A ENGINE MODEL Type PERKINS 1204E Water cooled, 4 cycle Diesel, 4-Cylinders in line, direct injection, turbocharged,

More information

TXC 225LC-1 HYDRAULIC EXCAVATOR TXC 225LC-1. Hydraulic Excavator

TXC 225LC-1 HYDRAULIC EXCAVATOR TXC 225LC-1. Hydraulic Excavator Hydraulic Excavator OPERATING WEIGHT NET ENGINE POWER MAX DIG DEPTH MAX REACH 47,400 lbs (21,500 kg) 148 hp (110 kw) @ 1,950 rpm 21' 9" (6,630 mm) 32' 6" (9,910 mm) HYDRAULIC EXCAVATOR FEATURES Powerful,

More information

Hydraulic Excavator. PC Loading Shovel PC Backhoe PC 5500

Hydraulic Excavator. PC Loading Shovel PC Backhoe PC 5500 ENGINE POWER 2 x 940 kw / 1260 HP @ 1800 rpm OPERATING WEIGHT 533 552 ton / 1,175,200 1,217,100 lb SHOVEL CAPACITY 29 m³ / 38 yd³ SAE 2:1 heaped BACKHOE CAPACITY 29 m³ / 38 yd³ SAE 1:1 heaped PC 5500-6

More information

Number of rollers Top, each track 3 Bottom, each track 8 Number of shoes Double grouser each side 47. Variable displacement axial piston design

Number of rollers Top, each track 3 Bottom, each track 8 Number of shoes Double grouser each side 47. Variable displacement axial piston design CX700B EXCAVATOR TIER III CERTIFIED ENGINE Model Type AH-6WG1XYSS, Tier III certified 4-stroke, turbocharged Cylinders 6 Bore/Stroke Displacement 5.79 in x 6.07 in (147 x 154 mm) 957 in 3 (15 700 cc) Grade

More information

Hydraulic Excavator PC 5500

Hydraulic Excavator PC 5500 Engine Power 2 x 940 kw / 120 HP @ 1800 rpm operating weight 33 2 ton / 1,17,200 1,217,100 Ib shovel capacity 29 m 3 38 yd 3 SAE 2:1 heaped backhoe capacity 29 m 3 38 yd 3 SAE 1:1 heaped PC00- Loading

More information

6030/6030. Hydraulic Shovel yd yd3. Bucket Capacity Backhoe (heaped 1:1) Operating Specifications

6030/6030. Hydraulic Shovel yd yd3. Bucket Capacity Backhoe (heaped 1:1) Operating Specifications 6030/6030 FS Hydraulic Shovel Engine* Engine Model Gross Power SAE J1995 Net Power SAE J1349 2 Cat C27 ACERT 1140 kw 1,530 hp 1140 kw 1,530 hp *Electric drive option available (1000 kw) on 6030 AC/6030

More information

Hydraulic Excavator. PC Loading Shovel PC Backhoe PC 8000

Hydraulic Excavator. PC Loading Shovel PC Backhoe PC 8000 ENGINE POWER 2 x 1500 kw / 2010 HP @ 1800 rpm OPERATING WEIGHT 752 777 ton / 1,658,200 1,713,300 lb SHOVEL CAPACITY 42 m³ / 55 yd³ SAE 2:1 heaped BACKHOE CAPACITY 42 m³ / 55 yd³ SAE 1:1 heaped PC 8000-6

More information

Crawler excavator R 976

Crawler excavator R 976 Crawler excavator R 976 Operating Weight with Backhoe Attachment: 85,3 95,5 kg Operating Weight with Shovel Attachment: 9,8 92,6 kg Engine Output: 4 kw / 544 P Bucket Capacity: 2. 6.6 m³ Shovel Capacity:

More information

Specif ications R125LCR-9A

Specif ications R125LCR-9A Specif ications R125LCR-9A ENGINE MODEL PERKINS 1204E Water cooled, 4 cycle Diesel, 4-cylinders Type in line, direct injection, turbocharged, charged air cooled and low emission Rated flywheel horse power

More information

OPERATING WEIGHT ton 1,170,000-1,200,000 lb SHOVEL CAPACITY 29 m 3 38 yd 3 SAE 2:1 heaped BACKHOE CAPACITY 29 m 3 38 yd 3 SAE 1:1 heaped

OPERATING WEIGHT ton 1,170,000-1,200,000 lb SHOVEL CAPACITY 29 m 3 38 yd 3 SAE 2:1 heaped BACKHOE CAPACITY 29 m 3 38 yd 3 SAE 1:1 heaped PC5500 OPERATING WEIGHT 531-549 ton 1,170,000-1,200,000 lb SHOVEL CAPACITY 29 m 3 38 yd 3 SAE 2:1 heaped BACKHOE CAPACITY 29 m 3 38 yd 3 SAE 1:1 heaped PC 5500 SUPER SHOVEL PC5500 S UPER S HOVEL WALK-AROUND

More information

S H O V E L B U C K E T C A PA C I T Y ( H E A P E D ) : S A E ( 2 : 1 ) : Y D.3 ( M 3 )

S H O V E L B U C K E T C A PA C I T Y ( H E A P E D ) : S A E ( 2 : 1 ) : Y D.3 ( M 3 ) E X 5 5 0 0 - S P E C I F I C AT I O N S B A C K H O E B U C K E T C A PA C I T Y: ( S A E H E A P E D ) 3 8. 0 Y D.3 ( 9. 0 M ³ ) S H O V E L B U C K E T C A PA C I T Y ( H E A P E D ) : S A E ( : ) :

More information

HYDRAULIC EXCAVATOR PC308USLC-3 308US. NET HORSEPOWER 134 kw rpm OPERATING WEIGHT kg 70,383 73,146 lb

HYDRAULIC EXCAVATOR PC308USLC-3 308US. NET HORSEPOWER 134 kw rpm OPERATING WEIGHT kg 70,383 73,146 lb NET HORSEPOWER 134 kw 179 HP @ 2050 rpm OPERATING WEIGHT 31925 33178 kg 70,383 73,146 lb PC308USLC-3 BUCKET CAPACITY 0.74 1.87 m 3 0.97 2.45 yd 3 PC 308US LC Photo may include optional equipment. HYDRAULIC

More information

Hydraulic Excavator PC 4000

Hydraulic Excavator PC 4000 Engine Power 1400 kw / 187 HP @ 1800 rpm operating weight 393 409 ton / 866,400 901,700 Ib shovel capacity 22 m 3 29 yd 3 SAE 2:1 heaped backhoe capacity 22 m 3 29 yd 3 SAE 1:1 heaped PC4000-11 Loading

More information

CONTROL. No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side.

CONTROL. No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side. SPECIFICATIONS ENGINE Maker / Model Type Rated flywheel horse power SAE DIN Perkins 1204F Water-cooled, 4-cycle diesel, 4-cylinder inline, Direct injection, Turbocharged, Charge and air cooled J1995 (gross)

More information

Reliability at work. Proven Durability. Hydraulic Mining Excavators

Reliability at work. Proven Durability. Hydraulic Mining Excavators Reliability at work Proven Durability Hydraulic Mining Excavators Proven Durability Proven success in nearly every surface mining application across the globe substantiates the durability of Bucyrus hydraulic

More information

CX800B EXCAVATOR. Number of rollers Top, each track 3 Bottom, each track 9 Number of shoes Double grouser each side 51

CX800B EXCAVATOR. Number of rollers Top, each track 3 Bottom, each track 9 Number of shoes Double grouser each side 51 CX800B EXCAVATOR TIER III CERTIFIED ENGINE Model Type AH-6WG1XYSS, Tier III certified 4-stroke, turbocharged Cylinders 6 Bore/ Displacement Fuel injection Fuel Fuel filter Cooling Horsepower per SAE J1349

More information

EX5500 BACKHOE ATTACHMENT. Engine Gross Power : 2 x kw (2 x hp) Operating Weight Loading Shovel : kg ( lb) Backhoe only

EX5500 BACKHOE ATTACHMENT. Engine Gross Power : 2 x kw (2 x hp) Operating Weight Loading Shovel : kg ( lb) Backhoe only EX00 BACKHOE ATTACHMENT Bucket assembly with bucket points Weight: 29 200 kg (6 390 lb) Capacity: 29.0 m3 (38.0 yd3; PCSA heaped) Width: 3 900 (12'") BE-Arm assembly Weight: 37 000 kg (81 600 lb) Width:

More information

EC140B LC VOLVO EXCAVATOR

EC140B LC VOLVO EXCAVATOR VOLVO EXCAVATOR EC140B LC Engine power, gross: 73 kw 98 hp Operating weight: 13.4 ~ 15.2 t 29,529 ~ 33,450 lb Buckets (SAE): 600 ~ 975 l 0.78 ~ 1.28 yd 3 Turbocharged Volvo diesel engine with direct injection

More information

Hydraulic Excavator R 9250 Arctic

Hydraulic Excavator R 9250 Arctic ydraulic Excavator R 9250 Arctic Operating Weight with Backhoe Attachment: 250,000 kg / 551,155 lb with Shovel Attachment: 253,500 kg / 558,870 lb Engine Output: 960 kw / 1287 hp Bucket Capacity: 13,00

More information

Technical Specifications

Technical Specifications Technical Specifications SENNEBOGEN Rubber Tired Material Handler Leading Through Innovation Engine Model Net Power Operating Weight M/rubber tired Cummins QSB., Tier Final HP (18 kw) 8,9 lb (8, kg) Reach

More information

DX140LC TECHNICAL DATA

DX140LC TECHNICAL DATA DX140LC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Doosan DL06 Diesel, Tier III Certified NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 98.6 / 1,850 (hp PER SAE J1995) GROSS

More information

Technical Specifications SENNEBOGEN Rubber Tired Material Handler preliminary

Technical Specifications SENNEBOGEN Rubber Tired Material Handler preliminary Technical Specifications SENNEBOGEN Rubber Tired Material Handler preliminary Leading Through Innovation Engine Model Net Power Operating Weight M/rubber tired Cummins QSB., Tier FInal 13 HP (97 kw), lb

More information

305C CR. Mini Hydraulic Excavator. Diesel Engine Net Power (ISO 9249) at 2400 rpm Operating Weight (without extra counterweight)

305C CR. Mini Hydraulic Excavator. Diesel Engine Net Power (ISO 9249) at 2400 rpm Operating Weight (without extra counterweight) 305C CR Mini Hydraulic Excavator Diesel Engine Net Power (ISO 9249) at 2400 rpm Operating Weight (without extra counterweight) With canopy With cab 35 kw/47.6 hp 5035 kg 5155 kg Caterpillar 305C CR Mini

More information

DX420LC TECHNICAL DATA

DX420LC TECHNICAL DATA DX420LC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Doosan DV11 Diesel, Tier III Certified NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 293 / 1,800 (hp PER SAE J1995) GROSS kw

More information

Technical description LR 622 Crawler loader

Technical description LR 622 Crawler loader Technical description LR 622 Crawler loader Engine output 97 kw/132 HP Operating weight 15.4 17.0 t /34,000 37,500 lb Bucket capacity 1.54 1.80 m 3 /2.01 2.35 cu.yd. Hydrostatic travel drive with electronic

More information

Technical Specifications SENNEBOGEN Rubber Tired Material Handler

Technical Specifications SENNEBOGEN Rubber Tired Material Handler Technical Specifications SENNEBOGEN Rubber Tired Material Handler Leading Through Innovation Engine Model Net Power Operating Weight M/rubber tired Cummins QSB., Tier F 13 HP (97 kw),8 lb (3,9 kg) Reach

More information

Technical Specifications SENNEBOGEN Demolition Machine

Technical Specifications SENNEBOGEN Demolition Machine Technical Specifications SENNEBOGEN Demolition Machine Leading Through Innovation Engine Model Net Power Cummins QSB.7 Tier Final HP (18 kw) Operating Weight Approx. 9,78 lb (3,9 kg) Technical Specifications

More information

preliminary Technical Specifications SENNEBOGEN Tracked Material Handler Leading Through Innovation Reach Standard 36' (11 m) Engine

preliminary Technical Specifications SENNEBOGEN Tracked Material Handler Leading Through Innovation Reach Standard 36' (11 m) Engine Technical Specifications SENNEBOGEN Tracked Material Handler preliminary Leading Through Innovation Engine Model Net Power Operating Weight R/Crawler Undercarriage Cummins QSB., Tier Final 13 HP (97 kw)

More information

With Tier 4 Interim Engine installed. hyundai heavy industries

With Tier 4 Interim Engine installed. hyundai heavy industries With Tier 4 Interim Engine installed hyundai heavy industries 1 Pride at Work Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance,

More information

With Tier 4 Final Engine installed HYUNDAI HEAVY INDUSTRIES

With Tier 4 Final Engine installed HYUNDAI HEAVY INDUSTRIES With Tier 4 Final Engine installed HYUNDAI HEAVY INDUSTRIES PRIDE AT WORK Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance, more

More information

Number of rollers Top, each track 1 Bottom, each track 5 Number of shoes Triple grouser each side 39. Gradeability 70%

Number of rollers Top, each track 1 Bottom, each track 5 Number of shoes Triple grouser each side 39. Gradeability 70% CX75 EXCAVATOR TIER III CERTIFIED ENGINE Model Isuzu AU-4LE2X,Tier III certified Type 4-stroke turbocharged Cylinders 4 Bore/Stroke 3.35 in x 3.78 in (85 x 96 mm) Displacement 133 in 3 (2179 cc) Fuel injection

More information

Technical Specifications SENNEBOGEN Track Material Handler

Technical Specifications SENNEBOGEN Track Material Handler Technical Specifications SENNEBOGEN Track Material Handler Leading Through Innovation Engine Model Net Power Cummins QSL9, Tier Final HP ( kw) Reach standard optional 1 (1 m) (stick pin) up to 8 (18 m)

More information

7. 5 M E T R I C T O N EXCAVATOR C 7 5 C

7. 5 M E T R I C T O N EXCAVATOR C 7 5 C 7. 5 M E T R I C T O N C EXCAVATOR Specifications Engine Type................................... Isuzu CC-4JG1 naturally aspirated direct-injection diesel; certified to EPA Tier 2 emissions Net Peak Power

More information

EC460B LC VOLVO EXCAVATOR. Engine power, gross: 245 kw (329 hp) Operating weight: 44.5 ~ 47.9 t Buckets (SAE): 1,725 ~ 3,775 l

EC460B LC VOLVO EXCAVATOR. Engine power, gross: 245 kw (329 hp) Operating weight: 44.5 ~ 47.9 t Buckets (SAE): 1,725 ~ 3,775 l VOLVO EXCAVATOR EC460B LC Engine power, gross: 245 kw (329 hp) Operating weight: 44.5 ~ 47.9 t Buckets (SAE): 1,725 ~ 3,775 l Turbocharged VOLVO diesel engine with water cooling, direct injection and charged

More information

Hydraulic Excavator. PC Loading Shovel PC Backhoe PC 5500

Hydraulic Excavator. PC Loading Shovel PC Backhoe PC 5500 Engine Power 2 x 940 kw / 120 HP @ 1800 rpm operating weight 33 2 ton / 1,17,200 1,217,100 Ib shovel capacity 3 29 m 38 yd3 SAE 2:1 heaped backhoe capacity 3 29 m 38 yd3 SAE 1:1 heaped PC00- Loading Shovel

More information

EC210B LC EC210B NC/EC210B NLC

EC210B LC EC210B NC/EC210B NLC VOLVO EXCAVATOR EC210B LC EC210B NC/EC210B NLC MONOBLOCK/2-PIECE BOOM Engine power, gross: 119 kw (159 hp) Operating weight: LC: 21,3 ~ 22,3 t NC: 20,9 ~ 21,8 t NLC: 21,5 ~ 22,2 t Buckets (SAE): 750 ~

More information

CX80C OPERATOR ENVIRONMENT

CX80C OPERATOR ENVIRONMENT CX80C EXCAVATOR SWING BOOM TIER 4 FINAL CERTIFIED PRELIMINARY ENGINE Model Type Cylinders Isuzu AP-4LE2X, Tier 4 Final Certified Water-cooled, 4-cycle. Turbo-charged w/ air-cooled intercooler w/ DOC 4-cylinder

More information

CX80C EXCAVATOR DOZER BLADE TIER 4 FINAL CERTIFIED

CX80C EXCAVATOR DOZER BLADE TIER 4 FINAL CERTIFIED CX80C EXCAVATOR DOZER BLADE TIER 4 FINAL CERTIFIED ENGINE Model Emissions Certification Fuel Type Cylinders Isuzu AP-4LE2X Tier 4 Final Requires ultra low-sulfur fuel B5 biodiesel tolerant Water-cooled,

More information

Hydraulic Excavator RH 170

Hydraulic Excavator RH 170 Hydraulic Excavator RH 170 Service weight 370 t Engine output 1492 kw Face shovel (SAE 1:1) 21 m 3 Backhoe bucket (SAE 1:1) 20 m 3 The RH 170 from TEREX O&K: 370 tonnes of productivity. This 21-m 3 excavator

More information

308E. Mini Hydraulic Excavator

308E. Mini Hydraulic Excavator 308E Mini Hydraulic Excavator Engine Weights Engine Model Cat C3.3 DI Turbo Operating Weight Standard Stick 7160 kg Net Power @ 2,400 rpm 46.8 kw Operating Weight Long Stick 7190 kg Gross Power @ 2,000

More information

Technical Specifications SENNEBOGEN Rubber Tired Material Handler

Technical Specifications SENNEBOGEN Rubber Tired Material Handler Technical Specifications SENNEBOGEN Rubber Tired Material Handler Leading Through Innovation Engine Model Net Power Cummins QSB.-C Tier Final HP ( kw) Reach standard optional '" (. m) (stick pin) '" (

More information

Technical Specifications SENNEBOGEN Track Material Handler

Technical Specifications SENNEBOGEN Track Material Handler Technical Specifications SENNEBOGEN Track Material Handler Leading Through Innovation Engine Model Net Power Cummins QSB., Tier Final HP (18 kw) Reach standard optional '1" (1. m) (stick pin) '" (1 m)

More information

FORESTRY MACHINE PC200LL-7. Purpose Built Forestry Machine Road Builder, Log Loader Heel Type, Processor/Delimber Carrier

FORESTRY MACHINE PC200LL-7. Purpose Built Forestry Machine Road Builder, Log Loader Heel Type, Processor/Delimber Carrier NET HORSEPOWER 107 kw 143 HP @ 1950 rpm OPERATING WEIGHT 28610 kg 63,074 lb Purpose Built Forestry Machine Road Builder, Log Loader Heel Type, Processor/Delimber Carrier PC 200 LL FORESTRY MACHINE Local

More information

HYDRAULIC EXCAVATOR. PC210LC-8M0 Super Long Front PC210LC-8M0

HYDRAULIC EXCAVATOR. PC210LC-8M0 Super Long Front PC210LC-8M0 GROSS HORSEPOWER 110 KW 147 HP NET HORSEPOWER 103 KW 138 HP OPERATING WEIGHT 23,350 kg MAX HORIZONTAL REACH 15,240 mm Super Long Front PC 210 HYDRAULIC EXCAVATOR H Y D R A U L I C E X C A V A T O R WALK

More information

EC240B Lc EC240B NLC MONOBLOCK/2-PIECE BOOM. more care. built in. VOLVO EXCAVATOR

EC240B Lc EC240B NLC MONOBLOCK/2-PIECE BOOM. more care. built in. VOLVO EXCAVATOR VOLVO EXCAVATOR EC240B Lc EC240B NLC MONOBLOCK/2-PIECE BOOM Engine power, gross: 134 kw (180 hp) Operating weight: LC: 24.2 ~ 25.8 t NLC: 24.8 ~ 25.7 t Turbocharged VOLVO diesel engine with water cooling,

More information

EX-6 series D&D' K G A B I H J

EX-6 series D&D' K G A B I H J EX- series E D&D' F K G C I H J A B A Distance between tumblers 7 000 mm B Undercarriage length 350 mm C Counterweight clearance 3 000 mm D Rear-end swing radius 7 50 mm D' Rear-end length 7 0 mm E Overall

More information

303 CR. Mini Hydraulic Excavator

303 CR. Mini Hydraulic Excavator 303 CR Mini Hydraulic Excavator Engine Power Gross 20.2 kw 27.1 hp Net 19.5 kw 26.1 hp Maximum Operating Weight With cab 3420 kg 7524 lb With canopy 3330 kg 7326 lb 303 CR Mini Hydraulic Excavator Designed

More information

EX-6 series HYDRAULIC EXCAVATOR D&D' G A B I H J

EX-6 series HYDRAULIC EXCAVATOR D&D' G A B I H J EX- series E D&D' F K I H J G A B C A Distance between tumblers 7 000 mm B Undercarriage length 350 mm C Counterweight clearance mm D Rear-end swing radius 7 50 mm D' Rear-end length 7 0 mm E Overall width

More information

Technical Specifications Sennebogen Track Material Handler

Technical Specifications Sennebogen Track Material Handler Technical Specifications Sennebogen Track Material Handler Leading Through Innovation Engine Model Net Power Cummins QSX1-C, Tier i HP (391 kw) Reach standard optional 9'" (1.1 m) (stick pin) up to 3'"

More information

CX135. Variable displacement axial piston design

CX135. Variable displacement axial piston design CX135 EXCAVATOR TIER III CERTIFIED ENGINE Model Type Isuzu AJ-4JJ1X, Tier III certified 4-stroke, turbocharged Cylinders 4 Bore/Stroke Displacement Fuel injection Fuel injection pump Fuel Fuel filter Cooling

More information

MATERIAL HANDLER MHL320 D. Specifications. Features

MATERIAL HANDLER MHL320 D. Specifications. Features MHL D MATERIAL HANDLER Specifications Standard Machine Weight Engine Output Reach, lbs 9 t hp kw Up to ft. m Features Fuel efficient and powerful, the hp kw turbo diesel engine enables movement of loads

More information

EC160B NLC VOLVO EXCAVATOR MONOBLOCK/2-PIECE BOOM

EC160B NLC VOLVO EXCAVATOR MONOBLOCK/2-PIECE BOOM VOLVO EXCAVATOR EC160B LC EC160B NLC MONOBLOCK/2-PIECE BOOM Engine power, gross: 90 kw (121 hp) Operating weight: LC: 16.6 ~ 18.4 t NLC: 16.5 ~ 18.3 t Buckets (SAE) 775 ~ 1,225 l Turbocharged VOLVO diesel

More information

ZAXIS DASH-5 Ultrashort-CLASS EXCAVATORS ZX245LC kw (159 hp)

ZAXIS DASH-5 Ultrashort-CLASS EXCAVATORS ZX245LC kw (159 hp) ZAXIS DASH-5 Ultrashort-CLASS EXCAVATORS ZX245LC-5 119 kw (159 hp) ZX245LC-5 ZAXIS DASH-5 Ultrashort-CLASS EXCAVATORS Engine ZX245LC-5 Manufacturer and Model Isuzu 4HK1 Non-Road Emissions Standard EPA

More information

EX-6 series HYDRAULIC EXCAVATOR Engine Gross Power : Operating Weight : Loading Shovel Bucket : Backhoe Bucket :

EX-6 series HYDRAULIC EXCAVATOR Engine Gross Power : Operating Weight : Loading Shovel Bucket : Backhoe Bucket : EX-6 series A Distance between tumblers 6 660 mm B Undercarriage length 8 700 mm C Counterweight clearance 2 440 mm D Rear-end swing radius 6 780 mm D Rear-end length 6 650 mm E Overall width of upperstructure

More information

EC460B LC VOLVO EXCAVATOR. Engine power, gross: 245 kw (329 hp) Operating weight: 45,1 ~ 47,9 t Buckets (SAE): ~ l

EC460B LC VOLVO EXCAVATOR. Engine power, gross: 245 kw (329 hp) Operating weight: 45,1 ~ 47,9 t Buckets (SAE): ~ l VOLVO EXCAVATOR EC460B LC Engine power, gross: 245 kw (329 hp) Operating weight: 45,1 ~ 47,9 t Buckets (SAE): 1 800 ~ 3 775 l Turbocharged VOLVO diesel engine with direct injection and charged air cooler

More information

EX-6 series D&D' I H J A B

EX-6 series D&D' I H J A B EX- series E D&D' F I H J G K A B C A Distance between tumblers 7 000 mm B Undercarriage length 350 mm C Counterweight clearance 3 000 mm D Rear-end swing radius 7 50 mm D' Rear-end length 7 0 mm E Overall

More information

Operating Weight : 15,095kg

Operating Weight : 15,095kg Operating Weight : 15,095kg TOUGH, POWERFUL, RELIABLE Large Floor with Foot Rest Wraparound Counterweight Triple Flanged Track Rollers LED Work Lights The new TB2150 hydraulic excavator is the largest

More information

Lubricant and Coolant Capacity

Lubricant and Coolant Capacity Engine Isuzu AI-4HK1X Tier 3 turbocharged diesel engine with electronic fuel control, 153 Net HP (114 kw), 5.2 Liter displacement, 4-cylinder, water-cooled, EGR with cooler, air-toair intercooler, 24-volt

More information

350 MH. Material Handler

350 MH. Material Handler 0 MH Material Handler The Cat 0 Material Handler is specifically designed for the scrap and material handling customer. This machine uses the most sophisticated manufacturing technology to ensure the highest

More information

HYDRAULICS. Pilot control hydraulic system Pump (1)... Gear design Maximum capacity gpm (22.8 L/min) Relief pressure psi (3.

HYDRAULICS. Pilot control hydraulic system Pump (1)... Gear design Maximum capacity gpm (22.8 L/min) Relief pressure psi (3. CX130 Excavator ENGINE Model... Case 4TA-390 Type... 4-stroke, turbocharged and aftercooled Cylinders... 4 Bore/Stroke... 4.02 x 4.72 (102 x 120 mm) Displacement... 239 in 3 (3.9 L) Fuel injection... Direct

More information

With Tier 4 Engine installed HYUNDAI HEAVY INDUSTRIES

With Tier 4 Engine installed HYUNDAI HEAVY INDUSTRIES With Tier 4 Engine installed HYUNDAI HEAVY INDUSTRIES PRIDE AT WORK Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance, optimal

More information

TRACKED EXCAVATOR JS145HD

TRACKED EXCAVATOR JS145HD MAX. OPERATING WEIGHT: 18011 kg ENGINE POWER: 81 kw (109 hp) E I H K J F L M G C D A B STATIC DIMENSIONS Dimensions in millimetres A Track length on ground 3090 B Undercarriage overall length 3940 C Track

More information

Hydraulic Excavator. PC Loading Shovel PC Backhoe PC 8000

Hydraulic Excavator. PC Loading Shovel PC Backhoe PC 8000 Engine Power x 1500 kw / 010 HP @ 1800 rpm operating weight 75 771 ton / 1,58,00 1,700,100 Ib shovel capacity 3 4 m 55 yd3 SAE :1 heaped backhoe capacity 3 4 m 55 yd3 SAE 1:1 heaped PC8000- Loading Shovel

More information

EXCAVATOR STANDARD & DOZER BLADE EQUIPPED TIER 3 CERTIFIED

EXCAVATOR STANDARD & DOZER BLADE EQUIPPED TIER 3 CERTIFIED CX225 MSR EXCAVATOR STANDARD & DOZER BLADE EQUIPPED TIER 3 CERTIFIED ENGINE Model Type Isuzu AI-4HK1X, Tier 3 certified 4-stroke, turbocharged Cylinders 4 Displacement Bore/Stroke Fuel injection Fuel filter

More information

EX-6 series. Illustrations show diesel engine type.

EX-6 series. Illustrations show diesel engine type. EX-6 series A Distance between tumblers 6 660 mm B Undercarriage length 8 700 mm C Counterweight clearance 2 440 mm D Rear-end swing radius 6 780 mm D Rear-end length 6 60 mm E Overall width of upperstructure

More information

EC460 VOLVO EXCAVATOR LONG CRAWLER

EC460 VOLVO EXCAVATOR LONG CRAWLER VOLVO EXCAVATOR EC460 LONG CRAWLER Engine power, gross: 239 kw (321 hp) Operating weight: 44.3 ~ 46.0 t Buckets (SAE): 1900 ~ 2300 l Low-emission, turbocharged Cummins diesel engine with direct injection

More information

TRACKED EXCAVATOR JS370 LONG REACH. Net engine power: 210kW (281hp) Operating weight: 41149kg 42039kg Bucket capacity: 0.38m 3 0.

TRACKED EXCAVATOR JS370 LONG REACH. Net engine power: 210kW (281hp) Operating weight: 41149kg 42039kg Bucket capacity: 0.38m 3 0. TRACKED EXCAVATOR JS370 LONG REACH Net engine power: 210kW (281hp) Operating weight: 41149kg 42039kg Bucket capacity: 0.38m 3 0.79m 3 STATIC DIMENSIONS I E H M N J F K L G C D A B Illustration shows optional

More information

EX SPECIFICATIONS

EX SPECIFICATIONS EX2600-6 SPECIFICATIONS BACKHOE BUCKET CAPACITY: (SAE HEAPED): 17.0 M 3 (22.2 CU. YD.) SHOVEL BUCKET CAPACITY (HEAPED): 15.0 16.5 M 3 (19.6 21.6 CU. YD.) OPERATING WEIGHT: BACKHOE: 254 000 KG (560,000

More information

Lubricant and Coolant Capacity

Lubricant and Coolant Capacity Operating Weight: 105,600 lbs (47,900 kg) SAE Net Horsepower: with fan pump 329 HP (245 kw) without fan pump 362 HP (270 kw) Range: 1.58-4.05 yd 3 (1.21-3.10 m 3 ) Engine Isuzu AH-6UZ1XYSS Tier 3 turbocharged

More information