RH200. Hydraulic Mining Excavator RH200 HYDRAULIC MINING EXCAVATOR. General Data: Features. Product Specification Sheet.

Transcription

1 RH00 Hydraulic Mining Excavator 7,600 ( General Data: ( 0 8,0 (8 0 7,80 ( 7,0 (,80 (8 6,60 (,780 (9,00 ( 7 Features 7,000 ( 0,0 ( 8 7,000 ( 0 8,70 (8 8 8,760 (8 9 RH00 HYDRAULIC MINING EXCAVATOR Operating Weight TriPower shovel attachment Face Shovel t 79 sht Backhoe t 89 sht Engine Output SAE J 99,880 kw,0 HP Standard Bucket Capacity Face Shovel (SAE :) 6.0 m.0 yd Backhoe (SAE :) 8.0 m 6.6 yd Independent oil cooling system Spacious walk-through machine house -circuit hydraulic system Electronic-hydraulic servo control Board Control System (BCS) Torque control in closed-loop swing circuit Automatic central lubrication system Xenon working lights Product Specification Sheet

2 Operating Weight Shovel Standard track pads Operating weight Ground Pressure Further track pads on request Backhoe Standard track pads Operating weight Ground Pressure Further track pads on request Electrical System (diesel drive) System voltage Batteries in series / parallel installation Alternators Working spot lights Diesel Engines Engine Features,00 ( 7,000 kg (,7,0 lb).7 N/cm (7. psi),00 ( 7 kg (,77,60 lb) 6. N/cm (8.0 psi) Hydraulically driven radiator fan with electronically controlled fan speed Microprocessed engine control Automatic rev. reduction Heavy-duty air filters, STRATA with automatic dust evacuation Two-stage fuel filter incl. water separator Additional high-capacity water separator Pre-lube starting system Eliminator with centrifuge for engine oil filtration V 6 x Ah - V each 7 AH - V in total x 7 A each 8 x high brightness Xenon lights Battery isolation relays Emergency stop switches accessible from ground level, in engine module and in operator s cab Hydraulic Oil Cooling Oil flow of cooling pumps Diameter of fans Electric Motor (optional) Type Output Voltage Rated Current I N Frequency Revolutions Starting current x 88 l/min (x 9 US gal/m x 87 l/min (x 9 US gal/m x,70 ( x 6 Cooling system is fully independent of all main circuits, i.e. controlled cooling capacity is available whenever engine is running Gear-type cooling pumps supplying high-volume, low-pressure oil to fans and aluminium coolers Fan speed and flow of oil to the coolers are thermostatically controlled Extremely high cooling efficiency to ensure optimum oil temperature Squirrel cage induction motor,600 kw 6.6 kv +/- % (other on request) 66 A 0 Hz (60 Hz optional),00 min - (,800 min - optional) 0% of I N Custom-made electric motor with increased gap between rotor and stator to withstand severe mining conditions Power limit control by Pump Management System Diesel Engines Version - Cuins K 00-E Make and model x Cuins K 00-E Total rated net power ISO 06/,880 kw (,0 HP),800 min - Total rated net power SAE J9,880 kw (,0 HP),800 min - Total rated gross power SAE J99,880 kw (,0 HP),800 min - No. of cylinders (each engine) Bore Stroke 9 (6. 9 (6. Displacement 7.8 l (,00 in ) Aspiration Max. altitude without deration Turbocharged and aercooled,8 m (8,000 ) a.s.l. Emission certification US EPA Tier Fuel tank capacity,700 l (,80 US gal) Version - Cuins KTTA 8 C (optional for high altitudes) Make and model x Cuins KTTA 8 C Total rated net power ISO 06/,680 kw (,0 HP),800 min - Total rated net power SAE J9,680 kw (,0 HP),800 min - Total rated gross power SAE J99,680 kw (,0 HP),800 min - No. of cylinders (each engine) Bore Stroke 9 (6. 9 (6. Displacement 7.8 l (,00 in ) Aspiration Max. altitude without deration Emission certification Hydraulic System with PMS Main pumps (Diesel and electric version) Max. oil flow Max. pressure, attachment Max. pressure, travel Swing pumps Max. oil flow Max. pressure, swing circuit Total volume of hydraulic oil Hydraulic tank capacity Turbocharged and aercooled,00 m (,800 ) a.s.l. not available x variable flow axial piston pumps x 9 l/min ( x US gal/m x 9 l/min ( x US gal/m 0 MPa = 00 bar (,0 psi) 6 MPa = 60 bar (,0 psi) x reversible swash plate pumps x reversible swash plate pumps x l/min ( x 9 US gal/m x 87 l/min ( x 9 US gal/m MPa = 0 bar (,080 psi) Approx. 8,00 I (,0 US gal) Approx. 6,0 l (,6 US gal) Pump Managing System (PMS) contains: Electronic load limit control Flow on demand from main pumps depending on joystick position Automatic regulation of main pumps to zero flow without demand Automatic rpm reduction of engine speed during workout breaks Reduced oil flow of main pumps at high hydraulic oil temperature or at high engine temperature Pressure cut-off for main pumps Cooling of pump transmission gear oil Filters: Full-flow high-pressure filters (0 µm) for the main pumps, installed directly behind each pump High pressure filters (0 µm) for the closed swing circuit Full-flow filters ( µm) for the complete return circuit Pressure filters (0 µm and 6 µm) for servo circuit Pressure filters (0 μm) for the feed pumps of the closed swing circuit Transmission oil filters (0 µm)

3 Undercarriage Travel speeds ( stages) Max. tractive force Operator s Cab Operator s eye level Internal dimensions st stage nd stage Width Max..6 km/h (0.99 mph) Max.. km/h (. mph),0 kn (60 t = 7,060 lb) Gradability of travel drives Max. 0 % Track pads (each side) 9 Bottom rollers (each side) 6 Support rollers (each side) Travel drives (each side) Parking brakes plus a skid plate in between planetary transmission with two-stage axial piston motors Wet multiple-disc brake, spring-applied/hydraulically released Cast double-grouser combined pad links with bushings connected by hardened full floating pins All running surfaces of sprockets, idlers, rollers and pad links as well as teeth contact areas of sprocket and pad links are hardened Fully hydraulic self-adjusting track tensioning system with membrane accumulator Automatic hydraulic retarder valve to prevent over-speed on downhill travel Acoustic travel alarm approx. 7.6 m (,00 (7,600 (,0 (7 Pneumatically cushioned and multi-adjustable comfort seat with lumbar support, seat heating, safety belt, head and arm rests Switch in seat cushion to neutralize automatically the hydraulic controls when operator leaves the seat Joystick controls integrated in independently adjustable seat consoles Fold-away auxiliary seat with safety belt FOPS (rock guard; approved acc. to DIN ISO 9) integrated into cab structure All-round safety glass, armoured windshield and sliding side window Windshield with parallel intermittent wiper / washer Roller blind at windshield Robust instrument panel incl. large colored BCS screen with transflective technology Board Control System (BCS) electronic monitoring and data logging system for vital signs and service data of engines, hydraulic and lubrication system Machine access via retractable boarding ladder, hydraulically operated Sliding emergency ladder (kick-down type) with ladder cage Swing System Swing Drives Parking Brakes Max. swing speed Swing ring Attachments compact planetary transmissions with axial piston motors Wet multiple disc brake, spring-loaded / hydraulically released.9 rpm. rpm Triple-race roller bearing with sealed internal gearing Closed-loop swing circuit with torque control Hydraulic braking of the swing motion by counteracting control All raceways of swing ring as well as grease bath for internal gearing supplied by automatic central lubrication system Automatic Lubrication System Capacity of grease container,000 l (6 US gal) Dual-circuit system with hydraulically driven heavy-duty pump and electronic time relay control to adjust the pause / lube times Connected to the lubrication system are the swing roller bearing with internal gearing and all pivot points of attachment, bucket and cylinders System failures displayed by Board Control System Grease filters (00 μm) between service station and container as well as directly behind grease pump Retractable Service Station Retractable service station installed underneath the engine module and easily accessible from ground. Equipped with: Quick couplings for: Diesel fuel Engine coolant - le / right Pump transmission gear oil - le / right Engine oil (oil pan) - le / right Engine oil (additional tank - optional) - le / right Hydraulic oil tank Grease container CAT jump-start socket Indicator lights for fuel tanks le/right full and grease container full Booms and sticks are torsion-resistant, welded box design of hightensile steel with massive steel castings at pivot areas Welding procedures allow for internal counter-welding (double prep weld) wherever possible Booms and sticks are stress-relieved aer welding Inspection hole in booms Catwalks with rails at booms Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve Shovel attachment with patented TriPower kinematics ensuring the following main features: Horizontal automatic constant-angle bucket guidance Vertical automatic constant-angle bucket guidance Automatic roll-back limiter to prevent material spillage Kinematic assistance to hydraulic forces Constant boom momentum throughout the whole li arc Crowd force assistance All buckets (FS and BH) are equipped with a universal wear wear package suitable for all standard applications, which consists of: Special liner material covering main wear areas inside and outside of bucket Lip shrouds between teeth Wing shrouds on side walls Heel shrouds at bottom edges Special wear packages for highly abrasive materials on request

4 TriPower Face Shovel Attachment (FS) Working Diagram - Boom 8.0 m (6 - Stick. m ( m sht m Working Range Max. digging height. m 0 in Max. digging reach 6. m in Max. digging depth. m 7 in Max. dumping height.8 m 8 9 in Crowd distance on level. m 9 Digging Forces Max. crowd force,890 kn,70 lb Max. crowd force at ground level,60 kn 70,800 lb Max. breakout force,00 kn 7,0 lb Face Shovels Type Iron ore shovel Heavy rock shovel Heavy rock shovel Standard rock shovel Tooth system ESCO Posilok system S0 ESCO Posilok system S0 ESCO Posilok system S0 ESCO Posilok system S0 Capacity SAE / PCSA :.0 m (7. yd ). m (.0 yd ) 6. m (.7 yd ) 0. m (9.9 yd ) Capacity SAE / CECE : 8.0 m³ (. yd³).0 m³ (7. yd³).0 m³ (7. yd³) 6.0 m³ (.0 yd ) Total width,800 ( 9,800 ( 9,800 ( 9,800 ( 9 Inner width,00 (,00 (,00 (,00 ( Opening width,0 (7,00 (8,00 (8,00 (8 No. of teeth Weight including wear kit 0,00 kg (89,070 lb),00 kg (9,80 lb),800 kg (9,0 lb),900 kg (9,80 lb) Maximum material density (loose).6 t/m (,80 lb/yd ). t/m (,7 lb/yd ).0 t/m (,70 lb/yd ).8 t/m (,00 lb/yd )

5 Backhoe Attachment (BH) Working Diagram - Boom. m ( - Stick. m ( sht m Working Range Max. digging depth 9. m 0 in Max. digging reach 9. m 6 Max. digging height 6.8 m in Digging Forces Max. crowd force,80 kn 69,860 lb Max. breakout force,80 kn 69,860 lb Backhoes Type Standard rock bucket Other buckets on request Tooth system ESCO size Capacity SAE : 8.0 m³ (6.6 yd³) Capacity CECE :.6 m³ (. yd³) Capacity struck. m³ (7.7 yd³) Total width,0 ( 7 Inner width,00 ( No. teeth 6 Weight incl. universal wear kit,00 kg (7, lb) Max. material density (loose).8 t/m³ (,00 lb/yd³)

6 General Packing List Crawler side frame ( units) Undercarriage center frame with swing roller bearing Width,0 (7 0 Width,800 ( 6 Gross weight,00 kg (9,0 lb).0 (7.0 (7.0 (7.0 (7 (7.0 ( (7 (7 8,008,00 (6 (6 8,00 (6,0 (6,0 (6,0 (6,0 (6,0 (6,0 (6,0 (6,0 (6 Gross weight,0 kg (97,0 lb) 6 tracks consisting of pad 8,00 8,00 (6 (6 lengths; each: ( ( 6.70 ( Width,00 ( 8,00 7 (6 Gross weight (each),700 kg (,90 lb) 8,00 (6 8,00 8,00 (6 (6 0 ( ( 0 0 ( ( ( 0 0 ( ( (,00 ( ( 6,00 6,00 ( 6,00,00 ( ( 6 6,00 ( ( 6,00,00,00 ( (666 ( ( ( ( ( Oil cooler module Gross weight 6,00 kg (,0 lb) Width,000 (6 7,70,70 ( (,70 (,70,70 ( ( ( ( ( ( ( (,70 (,70 9 ( 9,70 ( 9,70 ( 9 ( 9,70 (,70 9,70,70 ( 9 ( 9 Counterweights Gross weight,00 kg (7,70 lb),00,00 ( ( 6 6,00 ( 6,00,00 ( ( 6 6 Width 7,000 ( ) 7,000 ( ) Lower part Upper part,80,80 ( (,80 (,00 ( ( 6,00,00,00 ( (666,80,80 ( (,80 ( (,80,80,80 (( Gross weight 6,900 kg (8,0 lb) 9,00 kg (,0 lb),0,0 ( (,0 (,0,0 ( (,0 ( (,0,0,0 (( Crates Content Width Gross Weight Radiators with fan; crates each:,700 (8,0 (6 70 (,0 kg (,7 lb) Four swing gear,0 (,0 (,900 (6,0 kg (,770 lb) Swing ring cover,00 (7,00 (,00 ( 90 kg (860 lb) Swing ring bolts, access ladder, etc.,00 (,600 (,60 (,700 kg (8,60 lb) Catwalks and other parts,960 (6,900 (6,70 ( 9,00 kg (7,70 lb) Grease container with pump,700 ( 7,00 (,00 (6 9,70 kg (,0 lb) Barrels (hydraulic oil; grease),700 (,0 (,0 (,0 kg (6,90 lb) Barrels (engine oil; antifreeze),000 (6 7,0 (,00 ( 7,80 kg (,00 lb),070 (,070 (,070 (,070 ( (,070,070 (,070 (,070 ( Width,600 (8 7 Gross weight 9,70 kg (,90 lb) ( ( (,70 ( (,70,70,70 ( ( Crate with cabin and FOPS Gross weight,60 kg (9 lb),60 (7,60 9 (7 9,60 (7 9,60 (7,60 9 9,60 (7 9,60 (7,60 (7 9 (7 9 Width,00 (8 Width 7,000 ( ) ( ( ( (,700 (,700 (,700 (,700 ( (,700 (,700,700 (,700 ( Cab pedestal module Engine module with diesel engines,80 (,80 6 ( 6,80 ( 6,80 ( 6 ( 6,80 (,80,80 6 ( 6,80 ( 6,00 (,00 (,00 (,00 ( (,00 (,00,00,00 ( ( ( ( 0 ( Width,600 ( (000 Gross weight 60,000 kg (,80 lb),70 (,70 (,70 (,70 ( (,70,70 (,70 (,70 ( ( ( ( ( Superstructure center frame 0 0 (( ( ( 6.70 ( ( ( (

7 TriPower Shovel Attachment Boom with main valve block, TriPower linkages and rods Stick Width,00 ( ) Gross weight 6,800 kg (,80 lb) Width,800 (9 Gross weight 7,000 kg (7,80 lb) 8,900 8,900 (9 (9 8,900 (9 8,900 (9 8,900 8,900 (9 8,900 8,900 (9 (9 (9 Face shovel incl. pin for stick Crates with catwalks, railings and other parts Capacity (:) Width Gross Weight Width Gross weight 6.0 m³ (.0 yd³),800 ( 9,900 kg (96,780 lb),900 (,900 (6,600 (,00 kg (7,80 lb),00,00 ( (,00 (,00 (,00,00,00 ( ( ( ( Bundle with boom cylinders 700 Bundles with stick cylinders and bucket cylinders, each: 700 ( ( ( ( Width,00 ( Gross weight 700 7,0 kg ( (,60 lb) Width,00 ( Gross weight 700,00 kg ( (,60 lb),0,0 (6 ( ( 9, ( ( ( (,00 ( ( 700 ( ( ( (,0 (6 9,00 (,0 (6 9,00 (,0,0,0,0 (6 (6 (6 (6 9 9,00,00,00 ( ( ( Backhoe Attachment,900 (,900,900 (,900 ( ( (,900,900 ( (,900 ( Monoboom without main valve block,600 ( ),600,600 (,600 ( ( ) ) ) ( ),600,600 ( ( ),600 ( ) ) Stick with linkage and bucket cylinders Width,000 (6 Gross weight 6,000 kg (, lb) Width,00 (7 7 Gross weight 7,00 kg (60,90 lb),00,00 (7 (7 9 9,00 (7 9,00,00 (7 (7 9,00,00,00 (7 (7 (7 9 9 Backhoe bucket incl. pins for stick and linkage,70 (,70,70 (,70 ( ( (,70,70 ( (,70 (,00,00 (,00 ( ( ( ( 6,00,00 ( ( 6,00 ( 6 6 6,000 6,000 (7 ( ,000 (7 7 6,000 (7 7 6,000 6,000 6,000 (7 (7 ( ,700 7,700 ( ( 7,700 ( 7,700 7,700 ( ( 7,700 7,700 7,700 ( ( (,060 ( 0,060,060 (,060 ( ( ( 0,060,060 ( ( 0,060 ( 0 0,0,0 ( (,0 (,0,0 ( ( pallets with boom,0,0,0 cylinders, ( ( ( each: pallets with stick cylinders, each: Width 800 ( 7 Gross weight 7,80 kg (,80 lb) Width 800 ( 7 Gross weight,00 kg (9,60 lb),000,000 (6,000 (6 7 (6 7 7 (6 7,000,000 (6 7 (6,000 (6 7 7 Crates with main valve block, catwalks, railings and other parts Capacity (:) Width Gross weight Width Gross weight 8 m³ (6.6 yd³),0 ( 7,00 kg (76,060 lb),00 ( 9,900 (,0 (7,900 (6,700 ( 7,600 (,000 kg (,00 lb),0 kg (6,80 lb) 6,0 6,0 (0 ( ,0 (0 6 6,0 6,0 (0 ( ,0 6,0 6,0 (0 (0 ( ( ( ( ( ( ( ( ( 9 9,00,00 (7 (7,00 (7,00,00 (7 (7,00,00,00 (7 (7 ( ( ( 90 ( ( ( ( ( (

8 Component accessibility on superstructure. Diesel Engines. Oil coolers 7. Rotary distributor. Operator s seat. Gearboxes with hydraulic pumps. Hydraulic tank 8. Travel valves. BCS tower. Engine radiators with hydraulically driven fan 6. Swing drives 9. Switch cabinet and battery box. Auxilliary seat Anti-slip catwalks Anti-slip walking areas Optional Equipment General Export crating Finishing as per end user s corporate colors Customizing of logos as per customer s specification Superstructure Hydraulic service crane on superstructure with auxilliary engine Mesabi radiators instead of standard radiators Oil change interval extension for engine oil up to 00 hrs Engine oil burn system Folding access stairway, stairway angle approx. Round container with a standard 00 l grease barrel (instead of 00 l grease container) Lubricated pinion for greasing of internal gearing of swing ring Various cold-weather packages Further optional equipment on request Cab Various heating and air-conditioning systems Roller blinds at all windows Outside-mounted sun shields Rear windscreeen wiper Additional instrumentation Undercarriage Track pad width,600 or,800 Automatic lubrication of rollers by central lube system Cover plate under carbody (belly plate) Attachment Guards for shovel cylinders of FS-attachment Xenon lighting on boom Special wear packages Effective Date: February 0. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to appropriate Operator s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Bucyrus makes no other warranty, express or implied. Bucyrus is a registered trademark of Bucyrus International, Inc. in the USA and many other countries. Copyright 0 Bucyrus International, Inc.