This document is a preview generated by EVS

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "This document is a preview generated by EVS"

Transcription

1 CEN WORKSHOP CWA August 2005 AGREEMENT ICS English version Separators for marine residual fuel - Performance testing using specific test oil This CEN Workshop Agreement has been drafted and approved by a Workshop of representatives of interested parties, the constitution of which is indicated in the foreword of this Workshop Agreement. The formal process followed by the Workshop in the development of this Workshop Agreement has been endorsed by the National Members of CEN but neither the National Members of CEN nor the CEN Management Centre can be held accountable for the technical content of this CEN Workshop Agreement or possible conflicts with standards or legislation. This CEN Workshop Agreement can in no way be held as being an official standard developed by CEN and its Members. This CEN Workshop Agreement is publicly available as a reference document from the CEN Members National Standard Bodies. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2005 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No.:CWA 15375:2005 D/E/F

2 Contents Foreword...3 Introduction Scope Normative references Terms and definitions Test arrangements Performance test Analysis Test report...10 Annex A...11 Annex B

3 Foreword This CEN Workshop Agreement has been drafted and approved by a Workshop of representatives of interested parties on , the constitution of which was supported by CEN following the public call for participation made on A list of the individuals and organisations that supported the technical consensus represented by the CEN Workshop Agreement is available to purchasers from the CEN Management Centre. These organisations were drawn from the following economic sectors: Classification societies, Diesel engine manufacturers, Oil companies, Separator manufacturers and Ship owners and operators. The formal process followed by the Workshop in the development of the CEN Workshop Agreement has been endorsed by the National Members of CEN but neither the National Members of CEN nor the CEN Management Centre can be held accountable for the technical content of the CEN Workshop Agreement or possible conflict with standards or legislation. This CEN Workshop Agreement can in no way be held as being an official standard developed by CEN and its members. The final review/endorsement round for this CWA was started on and was successfully closed on The final text of this CWA was submitted to CEN for publication on This CEN Workshop Agreement is publicly available as a reference document from the National Members of CEN: AENOR, AFNOR, BSI, CSNI, CYS, DIN, DS, ELOT, EVS, IBN, IPQ, IST, LVS, LST, MSA, MSZT, NEN, NSAI, ON, PKN, SEE, SIS, SIST, SFS, SN, SNV, SUTN and UNI. Comments or suggestions from the users of the CEN Workshop Agreement are welcome and should be addressed to the CEN Management Centre. 3

4 Introduction In general, diesel engines for propulsion of ships burn marine residual fuels. Marine residual fuels contain the residue remaining after lighter fractions have been extracted from the crude oil during various processes in the oil refinery. They are a blend of this heavy fraction to which other refinery stream products are added to obtain the desired viscosity grade. Marine residual fuel oils contain elements inherent to the product itself but they also contain some contaminants, which either are due to an external contamination or enter into the fuel at the refinery during production, such as small fragments of a catalyst, used in the catalytic cracking stage in order to cut long molecule chains into smaller molecule chains. The catalyst fines are extremely hard and abrasive, and if not removed from marine residual fuel, can damage diesel engines with severe economic and, in extreme cases, safety consequences. The normal way of removing catalyst fines and other contaminants from marine residual fuel is by centrifugal separation. It is important that all fuels are centrifuged efficiently to minimise the level of contaminants, including catalyst fines. In bunkered oil the maximum content of catalyst fines, expressed as the total content of Aluminium and Silicon, is 80 mg/kg according to ISO 8217:1996. For bunkered fuels containing the maximum level of catalyst fines (80 mg/kg), engine builders expect the level of catalyst fines to be reduced to below 15 mg/kg, in the fuel entering the engine. As the level of catalyst fines in the bunkered fuel is lowered, the engine builders expect a related reduction in the amount of catalyst fines in the fuel entering the engine. For many years now there has been a demand from engine builders, ship builders, ship owners and classification societies for reliable performance criteria for the separators' ability to remove abrasive particles from marine residual fuels. The purpose of this CEN Workshop Agreement is to meet this demand by specifying a repeatable method to determine separation performance as regards specific test particles in specific test oil. 4

5 1 Scope This CEN Workshop Agreement is applicable to marine residual fuel separators. The procedure defines a performance parameter, Certified Flow Rate (CFR), at equivalent fuel oil viscosities of 380 mm 2 /s and 700 mm 2 /s at 50 C, using specific test oil under specific test conditions. The performance parameter (CFR), derived in accordance with this procedure may be used to compare separation performance of commercially available machines intended for marine application. However, it cannot be assumed that the same separation performance would be obtained on real catalyst fines in real heavy fuel oil. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN ISO 3104:1996, Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:1994) EN ISO 3675:1998, Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998) EN ISO 3838:2004, Crude petroleum and liquid or solid petroleum products Determination of density or relative density Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods (ISO 3838:2004) EN ISO 12185:1996, Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method (ISO 12185:1996) ISO 8217, Petroleum products - Fuels (class F) - Specification of marine fuels ISO :1999, Particle size analysis Laser diffraction methods Part 1: General principles ISO 11171:1999, Hydraulic fluid power Calibration of automatic particle counters for liquids 3 Terms and definitions 3.1 Separation efficiency Separation efficiency is a measure of the separator's capability to remove test specific contaminants. The separation efficiency is defined as follows: η = 100 (1 C out /C in ), where η is separation efficiency in %, C out is number of the test specific particles in cleaned test oil, C in is number of the test specific particles in test oil before separator. The method to be used to count the test particles is as given in ISO :1999 (and particle counter calibrated in accordance with ISO 11171:1999), or equivalent, validated method. 3.2 Certified Flow Rate (CFR) Certified Flow Rate is defined as the flow rate in l/h, 30 minutes after sludge discharge, at which the separation efficiency of the separator is 85 % using the test specific oil defined in and the test specific particles defined in Test medium properties Test oil specification The test oil shall be an automotive lube oil of type PAO 6 (or equivalent). This is a polyalphaoleophine used as a base for synthetic lubricating oils Test oil kinematic viscosity The test oil kinematic viscosity is to be measured according to EN ISO The oil kinematic viscosity can be expressed as: 5

This document is a preview generated by EVS

This document is a preview generated by EVS CEN WORKSHOP CWA 15897 November 2008 AGREEMENT ICS 13.060.30 English version Submerged Membrane Bioreactor (MBR) Technology This CEN Workshop Agreement has been drafted and approved by a Workshop of representatives

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 15367-3 January 2009 ICS 75.160.20; 75.200; 03.100.50 English Version Petroleum products - Guide for good housekeeping - Part 3: Prevention

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 15490:2007 Ethanol as a blending component for petrol - Determination of phe Ethanol as a blending component for petrol - Determination of phe EESTI STANDARDIKESKUS EESTI STANDARDI

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12900:2005 Refrigerant compressors - Rating conditions, tolerances and presentation of manufacturer's performance data Refrigerant compressors - Rating conditions, tolerances and

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12606-1:2007 Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation Bitumen and bituminous binders - Determination of the paraffin

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 15199-2:2006 Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 2: Heavy distillates and residual fuel Petroleum products - Determination

More information

DEUTSCHE NORM February 2005 DIN EN ISO 1514 { Paints and varnishes Standard panels for testing (ISO 1514 : 2004) English version of DIN EN ISO 1514

DEUTSCHE NORM February 2005 DIN EN ISO 1514 { Paints and varnishes Standard panels for testing (ISO 1514 : 2004) English version of DIN EN ISO 1514 DEUTSCHE NORM February 2005 DIN EN ISO 1514 { ICS 87.100 Supersedes September 1997 edition. Paints and varnishes Standard panels for testing (ISO 1514 : 2004) English version of DIN EN ISO 1514 Beschichtungsstoffe

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12642:2006 Securing of cargo on road vehicles - Body structure of commercial vehicles - Minimum requirements Securing of cargo on road vehicles - Body structure of commercial vehicles

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12674-3:2004 Roll containers - Part 3: Test methods Roll containers - Part 3: Test methods EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14432:2006 Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Product discharge and air inlet valves Tanks for the transport of dangerous

More information

SVENSK STANDARD SS-EN 15490:2007. Etanol som blandningskomponent i bensin Bestämning av phe

SVENSK STANDARD SS-EN 15490:2007. Etanol som blandningskomponent i bensin Bestämning av phe SVENSK STANDARD SS-EN 15490:2007 Fastställd 2007-09-03 Utgåva 1 Etanol som blandningskomponent i bensin Bestämning av phe Ethanol as a blending component for petrol Determination of phe ICS 71.080.60;

More information

Steel wire ropes - Terminations for steel wire ropes Safety - Metal and resin socketing

Steel wire ropes - Terminations for steel wire ropes Safety - Metal and resin socketing Draft SI part 34 34 October 2011 2011 ICS CODE ###### Steel wire ropes Terminations for steel wire ropes Safety Metal and resin socketing The Standards Institution of Israel 24/10/11 #### wwwsiiorgil 036412762

More information

Continuously hot-rolled strip and plate/sheet cut from wide strip of nonalloy and alloy steels - Tolerances on dimensions and shape

Continuously hot-rolled strip and plate/sheet cut from wide strip of nonalloy and alloy steels - Tolerances on dimensions and shape Irish Standard Continuously hot-rolled strip and plate/sheet cut from wide strip of nonalloy and alloy steels - Tolerances on dimensions and shape NSAI 2010 No copying without NSAI permission except as

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 1983:2006 Tööstuslikud ventiilid. Terasest kuulklapid Industrial valves - Steel ball valves EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard

More information

Laboratorieglas Byretter (ISO 385:2005)

Laboratorieglas Byretter (ISO 385:2005) SVENSK STANDARD SS-EN ISO 385:2005 Fastställd 2005-07-11 Utgåva 1 Laboratorieglas Byretter (ISO 385:2005) Laboratory glassware Burettes (ISO 385:2005) ICS 17.060; 71.040.20 Språk: engelska Publicerad:

More information

This document is a preview generated by EVS

This document is a preview generated by EVS CEN WORKSHOP CWA 16255 December 2010 AGREEMENT ICS 67.120.01 English version Meat raw materials obtained by deboning - Assessment of the muscle fibre structure - Pork, poultry and rabbit This CEN Workshop

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12592:2007 Bitumen and bituminous binders - Determination of solubility Bitumen and bituminous binders - Determination of solubility EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14522:2005 Gaaside ja aurude isesüttimistemperatuuri määramine Determination of the auto ignition temperature of gases and vapours EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 15491:2007 Ethanol as a blending component for petrol - Determination of total acidity - Colour indicator titration method Ethanol as a blending component for petrol - Determination

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 15469:2007 Petroleum products - Test method for free water in liquefied petroleum gas by visual inspection Petroleum products - Test method for free water in liquefied petroleum gas

More information

Eurocode 3 Design of steel structures

Eurocode 3 Design of steel structures BRITISH STANDARD BS EN 1993-3-2:2006 Eurocode 3 Design of steel structures Part 3-2: Towers, masts and chimneys Chimneys ICS 91.010.30; 91.060.40; 91.080.10 National foreword This British Standard is the

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 15519:2007 Paper and board intended to come into contact with foodstuffs - Preparation of an organic solvent extract Paper and board intended to come into contact with foodstuffs

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION CLC/TS 50457-1 SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION March 2008 ICS 43.120 Supersedes ENV 50275-2-3:1998 English version Conductive charging for electric vehicles - Part

More information

SVENSK STANDARD SS-EN ISO 4684:2005. Läder Kemiska provningar Bestämning av flyktiga ämnen (ISO 4684:2005)

SVENSK STANDARD SS-EN ISO 4684:2005. Läder Kemiska provningar Bestämning av flyktiga ämnen (ISO 4684:2005) SVENSK STANDARD SS-EN ISO 4684:2005 Fastställd 2005-11-11 Utgåva 1 Läder Kemiska provningar Bestämning av flyktiga ämnen (ISO 4684:2005) Leather Chemical tests Determination of volatile matter (ISO 4684:2005)

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION CLC/TS 50591 SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION November 2013 ICS 45.060.10 English version Specification and verification of energy consumption for railway rolling

More information

English version. This Technical Specification was approved by CENELEC on

English version. This Technical Specification was approved by CENELEC on TECHNICAL SPECIFICATION CLC/TS 60034-31 SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION February 2011 ICS 29.160 English version Rotating electrical machines - Part 31: Selection of energy-efficient motors

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12092:2002 Adhesives - Determination of viscosity Adhesives - Determination of viscosity EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN

More information

DEUTSCHE NORM October Steels Determination of depth of decarburization (ISO 3887 : 2003) English version of DIN EN ISO 3887

DEUTSCHE NORM October Steels Determination of depth of decarburization (ISO 3887 : 2003) English version of DIN EN ISO 3887 DEUTSCHE NORM October 2003 Steels Determination of depth of decarburization (ISO 3887 : 2003) English version of DIN EN ISO 3887 { EN ISO 3887 ICS 77.040.99 Stahl Bestimmung der Entkohlungstiefe (ISO 3887

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12173:2005 Chemicals used for treatment of water intended for human consumption - Sodium fluoride Chemicals used for treatment of water intended for human consumption - Sodium fluoride

More information

Eurocode 3 Design of steel structures

Eurocode 3 Design of steel structures BRITISH STANDARD BS EN 1993-5:2007 Incorporating corrigendum May 2009 Eurocode 3 Design of steel structures Part 5: Piling ICS 91.010.30; 91.080.10 National foreword This British Standard is the UK implementation

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 284:2006 Transpordipakendid. Klassi C transpordipakendid. Mõõtmed ja üldnõuded Swap bodies - Non-stackable swap bodies of class C - Dimensions and general requirements EESTI STANDARDIKESKUS

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12122:2005 Chemicals used for treatment of water intended for human consumption - Ammonium solution Chemicals used for treatment of water intended for human consumption - Ammonia

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 1317-8 April 2012 ICS 13.200; 93.080.30 English Version Road restraint systems - Part 8: Motorcycle road restraint systems

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16793 January 2016 ICS 23.060.40; 13.220.99 English Version Guide for the selection, application and use of flame arresters Guide pour la sélection,

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14895:2006 Bitumen and bituminous binders - Stabilisation of binder from bituminous emulsions or from cut-back and fluxed bituminous binders Bitumen and bituminous binders - Stabilisation

More information

Provläsningsexemplar / Preview

Provläsningsexemplar / Preview Provläsningsexemplar / Preview EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 14975:2006+A1 July 2010 ICS 91.060.30 Supersedes EN 14975:2006 English Version Loft ladders - Requirements, marking

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14832:2005 Petroleum and related products - Determination of the oxidation stability and corrosivity of fire-resistant phosphate ester fluids Petroleum and related products - Determination

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 13016-2:2007 Liquid petroleum products - Vapour pressure - Part 2: Determination of absolute pressure (AVP) between 40 ºC and 100 ºC Liquid petroleum products - Vapour pressure -

More information

Provläsningsexemplar / Preview SVENSK STANDARD SS-EN 14667:2006 Fastställd 2006-12-06 Utgåva 1 Surface active agents Determination of low boiling solvents in liquid formulations Gas chromatographic method

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-31521-4 EN 300:2006 SOUTH AFRICAN NATIONAL STANDARD Oriented Strand Boards (OSB) Definitions, classification and specifications This national standard is the identical implementation of

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12120:2005 Chemicals used for treatment of water intended for human consumption - Sodium hydrogen sulfite Chemicals used for treatment of water intended for human consumption - Sodium

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 15520:2007 Thermal spraying - Recommendations for constructional design of components with thermally sprayed coatings Thermal spraying - Recommendations for constructional design

More information

Eurocode 2 Design of concrete structures

Eurocode 2 Design of concrete structures BRITISH STANDARD BS EN 1992-3:2006 Eurocode 2 Design of concrete structures Part 3: Liquid retaining and containment structures The European Standard EN 1992-3:2006 has the status of a British Standard

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 10219-2:2006 Külmsurvevormitud keevitatud konstruktsiooni-õõnesprofiilid mittelegeerja peeneteraterastest. Osa 2: Tolerantsid, mõõtmed ja profiili omadused Cold formed welded structural

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14157:2004 Natural stone test methods - Determination of the abrasion resistance Natural stone test methods - Determination of the abrasion resistance EESTI STANDARDIKESKUS EESTI

More information

Eurocode 8: Design of structures for earthquake resistance

Eurocode 8: Design of structures for earthquake resistance BRITISH STANDARD BS EN 1998-4:2006 Eurocode 8: Design of structures for earthquake resistance Part 4: Silos, tanks and pipelines The European Standard EN 1998-4:2006 has the status of a British Standard

More information

ILNAS-EN 15663:2017. Railway applications - Vehicle reference masses. Bahnanwendungen - Fahrzeugreferenzmassen

ILNAS-EN 15663:2017. Railway applications - Vehicle reference masses. Bahnanwendungen - Fahrzeugreferenzmassen Railway applications - Vehicle reference masses Bahnanwendungen - Fahrzeugreferenzmassen Applications ferroviaires - Masses de référence des véhicules 07/2017 National Foreword This European Standard EN

More information

Eurocode 3 Design of steel structures

Eurocode 3 Design of steel structures BRITISH STANDARD BS EN 1993-2:2006 Incorporating corrigendum July 2009 Eurocode 3 Design of steel structures Part 2: Steel bridges ICS 91.010.30; 91.080.10; 93.040 National foreword This British Standard

More information

Skeppsteknik Framdrivningsaggregat för fartyg Del 1: Ordlista för propellrars geometri (ISO :2002)

Skeppsteknik Framdrivningsaggregat för fartyg Del 1: Ordlista för propellrars geometri (ISO :2002) SVENSK STANDARD SS- Fastställd 2004-03-05 Utgåva 1 Skeppsteknik Framdrivningsaggregat för fartyg Del 1: Ordlista för propellrars geometri (ISO 3715-1:2002) Ships and marine technology Propulsion plants

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 15020:2006 Raudteealased rakendused. Pukseerseadmed. Toimimisnõuded, liidese erigeomeetria ja katsemeetodid Railway applications - Rescue coupler - Performance requirements, specific

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION CLC/TS 50535 SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION April 2010 ICS 45.060.01 English version Railway applications - Onboard auxiliary power converter systems Applications

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12806:2003 Automotive liquefied petroleum gas components - Other than containers Automotive liquefied petroleum gas components - Other than containers EESTI STANDARDIKESKUS EESTI

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 13016-1:2007 Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP) Liquid petroleum products - Vapour pressure - Part 1: Determination

More information

DEUTSCHE NORM October Structural steel equal and unequal leg angles Part 1: Dimensions English version of DIN EN

DEUTSCHE NORM October Structural steel equal and unequal leg angles Part 1: Dimensions English version of DIN EN DEUTSCHE NORM October 1998 Structural steel equal and unequal leg angles Part 1: Dimensions English version of DIN EN 10056-1 { EN 10056-1 ICS 77.140.70 Descriptors: Structural steel, angles, dimensions.

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-29507-3 EN 413-1:2011 SOUTH AFRICAN NATIONAL STANDARD Masonry cement Part 1: Composition, specifications and conformity criteria This national standard is the identical implementation of

More information

Eurocode 3 Design of steel structures

Eurocode 3 Design of steel structures BRITISH STANDARD BS EN 1993-1-5:2006 Incorporating corrigendum April 2009 Eurocode 3 Design of steel structures Part 1-5: Plated structural elements ICS 91.010.30; 91.080.10 National foreword This British

More information

DEUTSCHE NORM July 2004 DIN EN ISO 9038 { Test for sustained combustibility of liquids (ISO 9038 : 2002) English version of DIN EN ISO 9038

DEUTSCHE NORM July 2004 DIN EN ISO 9038 { Test for sustained combustibility of liquids (ISO 9038 : 2002) English version of DIN EN ISO 9038 DEUTSCHE NORM July 2004 DIN EN ISO 9038 { ICS 13.220.40; 87.040 Test for sustained combustibility of liquids (ISO 9038 : 2002) English version of DIN EN ISO 9038 Prüfung der Weiterbrennbarkeit von Flüssigkeiten

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 13149-1:2004 Public transport - Road vehicle scheduling and control systems - Part 1: WORLDFIP definition and application rules for onboard data transmission Public transport - Road

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 20483:2006 Cereals and pulses - Determination of the nitrogen content and calculation of the crude protein content - Kjeldahl method Cereals and pulses - Determination of the

More information

SVENSK STANDARD SS-EN 15489:2007. Etanol som blandningskomponent i bensin Bestämning av vattenhalt Metod med Karl Fischer titrimetrisk coulometri

SVENSK STANDARD SS-EN 15489:2007. Etanol som blandningskomponent i bensin Bestämning av vattenhalt Metod med Karl Fischer titrimetrisk coulometri SVENSK STANDARD SS-EN 15489:2007 Fastställd 2007-09-03 Utgåva 1 Etanol som blandningskomponent i bensin Bestämning av vattenhalt Metod med Karl Fischer titrimetrisk coulometri Ethanol as a blending component

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 840-1:2004 Teisaldatavad heitmekonteinerid. Osa 1: Kaherattalised konteinerid mahuga kuni 400 l, tõstmiseks kammtõsteseadistega, mõõtmed ja konstrueerimine Mobile waste containers

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 13802:2004 Railway applications - Suspension components - Hydraulic dampers Railway applications - Suspension components - Hydraulic dampers EESTI STANDARDIKESKUS EESTI STANDARDI

More information

DEUTSCHE NORM June Plastics Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics (ISO : 2001)

DEUTSCHE NORM June Plastics Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics (ISO : 2001) DEUTSCHE NORM June 2002 Plastics Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics (ISO 1043-1 : 2001) English version of DIN EN ISO 1043-1 { EN ISO 1043-1 ICS 01.040.83;

More information

Säkerhetsventil för gasoltankar (LPG) Pressure relief valves for LPG tanks

Säkerhetsventil för gasoltankar (LPG) Pressure relief valves for LPG tanks SVENSK STANDARD SS-EN 14129:2005 Fastställd 2005-02-11 Utgåva 1 Säkerhetsventil för gasoltankar (LPG) Pressure relief valves for LPG tanks ICS 23.060.40 Språk: engelska Publicerad: mars 2005 Copyright

More information

EVS-EN 13953:2003+A1:2007 This document is a preview generated by EVS

EVS-EN 13953:2003+A1:2007 This document is a preview generated by EVS EESTI STANDARD EVS-EN 13953:2003+A1:2007 LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG) (KONSOLIDEERITUD TEKST) LPG equipment

More information

Eurocode 1 Actions on structures

Eurocode 1 Actions on structures BRITISH STANDARD Eurocode 1 Actions on structures BS EN 1991-1-3:2003 Incorporating corrigenda December 2004 and March 2009 Part 1-3: General actions Snow loads ICS 91.010.30 National foreword This British

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION CLC/TS 50537-3 SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION February 2010 ICS 29.180; 45.060.10 English version Railway applications - Mounted parts of the traction transformer

More information

Plastics Polyoxymethylene (POM) moulding and extrusion materials Part 1: Designation system and basis for specifications (ISO :2004)

Plastics Polyoxymethylene (POM) moulding and extrusion materials Part 1: Designation system and basis for specifications (ISO :2004) SVENSK STANDARD SS-EN ISO 9988-1:2006 Fastställd 2006-04-12 Utgåva 1 Plast Sprutmassor av polyoxymetylen (POM) Del 1: Beteckningssystem och specifikationsgrund (ISO 9988-1:2004) Plastics Polyoxymethylene

More information

Eurocode 3 Design of steel structures

Eurocode 3 Design of steel structures BRITISH STANDARD BS EN 1993-3-1:2006 Incorporating corrigendum July 2009 Eurocode 3 Design of steel structures Part 3-1: Towers, masts and chimneys Towers and masts ICS 91.010.30; 91.080.10 National foreword

More information

DEUTSCHE NORM January Fasteners Electroplated coatings (ISO 4042 : 1999) English version of DIN EN ISO 4042

DEUTSCHE NORM January Fasteners Electroplated coatings (ISO 4042 : 1999) English version of DIN EN ISO 4042 DEUTSCHE NORM January 2001 Fasteners Electroplated coatings (ISO 4042 : 1999) English version of DIN EN ISO 4042 { EN ISO 4042 ICS 21.060.01; 25.220.40 Verbindungselemente Galvanische Überzüge (ISO 4042

More information

Karaktärisering av slam Filtreringsegenskaper. Del 1: Kappilär sugtid (CST)

Karaktärisering av slam Filtreringsegenskaper. Del 1: Kappilär sugtid (CST) SVENSK STANDARD SS-EN 14701-1:2006 Fastställd 2006-04-03 Utgåva 1 Karaktärisering av slam Filtreringsegenskaper Del 1: Kappilär sugtid (CST) Characterisation of sludges Filtration properties Part 1: Capillary

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14668:2005 Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two-phase titration method

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 6245:2003 Naftasaadused. Tuha määramine Petroleum products - Determination of ash EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN

More information

English version. Environmental technology verification - Air emission abatement technologies

English version. Environmental technology verification - Air emission abatement technologies CEN WORKSHOP CWA 16060 December 2009 AGREEMENT ICS 13.040.20 English version Environmental technology verification - Air emission abatement technologies This CEN Workshop Agreement has been drafted and

More information

SVENSK STANDARD SS-EN 14260:2004

SVENSK STANDARD SS-EN 14260:2004 SVENSK STANDARD SS-EN 14260:2004 Fastställd 2004-10-22 Utgåva 1 Derivat från kolpyrolys Tjära och beckbaserade bindemedel och relaterade produkter: Vägtjäror Egenskaper och testmetoder Derivatives from

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14620-3:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12916:2006 Petroleum products - Determination of aromatic hydrocarbon types in middle distillates - High performance liquid chromatography method with refractive index detection Petroleum

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12312-11:2005 Aircraft ground support equipment - Specific requirements - Part 11: Container/Pallet dollies and loose load trailers Aircraft ground support equipment - Specific requirements

More information

http://www.sis.se http://www.sis.se http://www.sis.se http://www.sis.se http://www.sis.se Provläsningsexemplar / Preview SVENSK STANDARD SS-EN 12642:2006 Fastställd 2006-10-24 Utgåva 2 Säkring av last

More information

COLD ROLLED STEEL SECTIONS -

COLD ROLLED STEEL SECTIONS - STANDARD I.S. EN 10162:2003 ICS 77.140.70 National Standards Authority of Ireland Dublin 9 Ireland COLD ROLLED STEEL SECTIONS - Tel: (01) 807 3800 Fax: (01) 807 3838 TECHNICAL DELIVERY CONDITIONS - DIMENSIONAL

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 11446:2004 Passenger cars and light commercial vehicles with 12 V systems - 13-pole connectors between towing vehicles and trailers - Dimensions and contact allocation Passenger

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14067-3:2003 Railway applications - Aerodynamics - Part 3: Aerodynamics in tunnels Railway applications - Aerodynamics - Part 3: Aerodynamics in tunnels EESTI STANDARDIKESKUS EESTI

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-26065-1 Edition 1 EN 12281:2002 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Printing and business paper Requirements for copy paper for dry toner imaging processes This national standard is

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-28152-6 EN 197-1:2011 SOUTH AFRICAN NATIONAL STANDARD Cement Part 1: Composition, specifications and conformity criteria for common cements This national standard is the identical implementation

More information

DEUTSCHE NORM March Hexagon head bolts Product grade C (ISO 4016 : 1999) English version of DIN EN ISO 4016

DEUTSCHE NORM March Hexagon head bolts Product grade C (ISO 4016 : 1999) English version of DIN EN ISO 4016 DEUTSCHE NORM March 2001 Hexagon head bolts Product grade C (ISO 4016 : 1999) English version of DIN EN ISO 4016 { EN ISO 4016 ICS 21.060.10 Sechskantschrauben mit Schaft Produktklasse C (ISO 4016 : 1999)

More information

SVENSK STANDARD SS-EN :2006. Offshore containers and associated lifting sets Part 2: Lifting sets Design, manufacture and marking

SVENSK STANDARD SS-EN :2006. Offshore containers and associated lifting sets Part 2: Lifting sets Design, manufacture and marking SVENSK STANDARD SS-EN 12079-2:2006 Fastställd 2006-04-28 Utgåva 1 Offshore containers and associated lifting sets Part 2: Lifting sets Design, manufacture and marking ICS 55.180.10 Språk: engelska Publicerad:

More information

Flanges and their joints Gaskets for PNdesignated

Flanges and their joints Gaskets for PNdesignated SVENSK STANDARD SS-EN 1514-2:2005 Fastställd 2005-06-09 Utgåva 2 Flänsar och deras förband Packningar för PNbetecknade flänsar Del 2: Spirallindade packningar för stålflänsar Flanges and their joints Gaskets

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 13452-1:2003 Railway applications - Braking - Mass transit brake systems - Part 1: Performance requirements Railway applications - Braking - Mass transit brake systems - Part 1: Performance

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12255-6:2002 Wastewater treatment plants - Part 6: Activated sludge processes Wastewater treatment plants - Part 6: Activated sludge processes EESTI STANDARDIKESKUS EESTI STANDARDI

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14264:2003 Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products: impregnating pitch - Characteristics and test methods Derivatives from coal pyrolysis

More information

DEUTSCHE NORM June 2006 DIN EN { ICS Supersedes DIN EN : See start of validity

DEUTSCHE NORM June 2006 DIN EN { ICS Supersedes DIN EN : See start of validity DEUTSCHE NORM June 2006 DIN EN 14399-6 { ICS 21.060.30 Supersedes DIN EN 14399-6:2005-06 See start of validity High-strength structural bolting assemblies for preloading Part 6: Plain chamfered washers

More information

DEUTSCHE NORM May 2004 DIN EN ISO 4029 { Hexagon socket set screws with cup point (ISO 4029 : 2003) English version of DIN EN ISO 4029

DEUTSCHE NORM May 2004 DIN EN ISO 4029 { Hexagon socket set screws with cup point (ISO 4029 : 2003) English version of DIN EN ISO 4029 DEUTSCHE NORM May 2004 DIN EN ISO 4029 { ICS 21.060.10 Supersedes DIN 916, December 1980 edition. Hexagon socket set screws with cup point (ISO 4029 : 2003) English version of DIN EN ISO 4029 Gewindestifte

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12697-2:2003+A1:2007 Bituminous mixtures - Test method for hot mix asphalt - Part 2: Determination of particle size distribution KONSOLIDEERITUD TEKST Bituminous mixtures - Test method

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 13652:2002 Soil improvers and growing media - Extraction of water soluble nutrients and elements Soil improvers and growing media - Extraction of water soluble nutrients and elements

More information

Kontroll och provning av tankfordon för transport av gasol (LPG) Inspection and testing of LPG road tankers

Kontroll och provning av tankfordon för transport av gasol (LPG) Inspection and testing of LPG road tankers SVENSK STANDARD SS-EN 14334:2005 Fastställd 2005-07-26 Utgåva 1 Kontroll och provning av tankfordon för transport av gasol (LPG) Inspection and testing of LPG road tankers ICS 43.080.10 Språk: engelska

More information

RESILIENT AND LAMINATE FLOOR COVERINGS - CASTOR CHAIR TEST IRISH STANDARD I.S. EN 425:2002. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann

RESILIENT AND LAMINATE FLOOR COVERINGS - CASTOR CHAIR TEST IRISH STANDARD I.S. EN 425:2002. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann IRISH STANDARD I.S. EN 425:2002 ICS 97.150 National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 RESILIENT AND LAMINATE FLOOR COVERINGS - CASTOR CHAIR TEST NSAI

More information

Provläsningsexemplar / Preview SVENSK STANDARD SS-EN 13577:2007 Fastställd 2007-04-16 Utgåva 1 Betong Kemiskt angrepp Bestämning av halt av aggressiv koldioxid i vatten Chemical attack on concrete Determination

More information

DEUTSCHE NORM DIN EN 10080

DEUTSCHE NORM DIN EN 10080 DEUTSCHE NORM DIN EN 10080 August 2005 { ICS 77.140.15; 77.140.60; 77.140.65 Supersedes DIN V ENV 10080, August 1995 edition, parts of DIN 488-1, September 1984 edition, DIN 488-2, DIN 488-4 and DIN 488-6,

More information

http://www.sis.se http://www.sis.se http://www.sis.se http://www.sis.se http://www.sis.se Provläsningsexemplar / Preview SVENSK STANDARD SS-EN 14420-6:2004+A1:2007 Fastställd 2007-02-09 Utgåva 1 Klämkoppling

More information

WATER-TUBE BOILERS AND AUXILIARY

WATER-TUBE BOILERS AND AUXILIARY IRISH STANDARD I.S. EN 12952-12:2003 ICS 13.060.25 27.040 WATER-TUBE BOILERS AND AUXILIARY National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 INSTALLATIONS -

More information