HDS Gen3: 4.0. HDS Gen2 Touch: 6.0

Transcription

1 HDS Gen3: HDS Gen2 Touch: Software Updates

2 New Features HDS Gen3

3 New Features HDS Gen3 Features With Version 4.0 Mercury VesselView VesselView Link Support Network Analyzer and Service Assistant Improvements 3 Navico Company Confidential

4 New Features HDS Gen2 Touch

5 New Features HDS Gen2 Touch Features With Version 6.0 Mercury VesselView VesselView Link Support 5 Navico Company Confidential

6 Mercury VesselView Link HDS Gen3 and Gen2 Touch

7 VesselView Link Support NOS 55 will introduce support for the brand new Mercury Marine VesselView Link SmartCraft gateway. Brand new user interface Split screen functionality Brand new control bar Touch Friendly user interface Scalable for different split ratios

8 Brand New Interface The new Mercury user interface is packed full of features and has been developed by extensive end user testing and feedback. The new user interface is designed to: Display the most relevant engine information RPM Speed Fuel level Voltage Engine trim Trim tabs Quick access to engine data Deep dive for enlarged view Engine fault notifications Fault notification identifying effected engine

9 Deep dive Panels

10 Split Screen Functionality Add the Mercury panel to any split screen combination

11 Quick Access Control Bar Quick access to: SmartCraft engine data Cruise control Troll control Smart Tow Eco Mode

12 Quick Access to Engine Data

13 Engine Control While Fishing Easily enable and adjust Troll and Cruise Control from ANY panel.

14 Fault Warnings & History Engine warning and fault notifications Alarm history for all engine faults

15 Engine Maintenance Engine maintenance life remaining & Reset

16 Compatible MFD s HDS gen2 Touch HDS gen3

17 Interfacing VesselView Link Single Mercury P/N:8M VesselView Link module is powered from the Smartcraft network

18 Interfacing VesselView Link Multi Mercury P/N:8M

19 Network Analyzer & Service Assistant Upgrades HDS Gen3

20 20 Navico Company Confidential

21 Network Analyzer and Service Assistant Upgrades Expands on the number of connected devices compatible with the Network Analyzer feature. Network Analyzer (Remote Software Updates): Allows a connected device to scan the boats network of devices and check to see if each device s software is up to date. With this update we can check for more devices and offer to download updates directly to an installed blank SD/microSD card. 21 Navico Company Confidential

22 Noteworthy Bug Fixes and Improvements

23 Fixes Fusion AV750 (Gen3): We have corrected an issue when connecting to a Fusion AV750 radio via Fusion- Link and losing the ability to power the radio on/off Trails (Gen2T & Gen3): We have corrected an issue with trails not remaining if they were created on an older version of software, then imported into HDS Gen2 Touch and Gen3. See Tech Bulletin TB (In Appendix) for full details of the issue The workaround described in TB is no longer required 23 Navico Company Confidential

24 Appendix

25 TB / June 15, 2016 HDS Gen3 (SW version 3.5) and HDS Gen2 touch (SW version 5.5) trail persistence issue Product: All SKU s Product Description: HDS Gen2 Touch & HDS Gen3 Software Version: HDS G2T 5.5 & HDS Gen3 3.5 Effective Date: 26 June 2016 Inspect/Update Current Inventory: No HDS users importing Waypoints, Routes & Trails (WRT) saved from a previous software version may experience an issue with trails disappearing from their HDS unit after the unit is powered off. This will be corrected in an upcoming software update, but in the interim, a workaround is available that addresses this issue. Users not re-importing or replacing their WRT file after the software update to 3.5 (Gen3) or 5.5 (Gen2 Touch) should not have issues with existing trail data Users saving WRT files in 3.5 or 5.5 also should not have issues with trail persistence when data is imported How to Back up Waypoints, Routes & Trails: Press the Pages key Select Files Select Waypoints, Routes, Trails and Trips database Select Export Select User data file version 5 Select Export Select the desired memory card destination (Left or Right) Press OK Select New or if there are no other WRT files on the card. (Change the file Name, if desired) Select Enter. Executing the Workaround: If the WRT file was exported from software version 3.0 (Gen3), 5.0 (Gen2 Touch) or earlier, you will need to perform the workaround. Insert the SD or microsd card containing the Exported/Saved WRT file into the card slot Import the WRT file from the SD/microSD card to an HDS unit running software version 3.5 (Gen3) or 5.5 (Gen2 Touch) Before attempting to power off or reboot the HDS unit, re-export the WRT file from the HDS unit running software version 3.5 (Gen3) or 5.5 (Gen2 Touch) Follow the steps above for exporting a WRT file. Power Cycle the Unit Re-import the WRT file created on the HDS unit with software version 3.5 (Gen3) or 5.5 (Gen2 Touch). Follow the steps above to Import the WRT file. 25 Navico Company Confidential

26