aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding

Transcription

1 aerospace climate control electromechanical filtration fluid & gas handlg hydraulics pneumatics process control sealg & shieldg Automotive & Boat

2 Hose ID Range (mm) Temp. Range ( C) Application RADIOR / +100 coolg le system E-Z FROM GS / +125 high flexible hose for coolant le system RADIOR DIN / +125 coolg le system AIRBRAKE DIN / +70 breakg system AIRBRAKE SAE J 1402-A / +93 breakg system CARBOPRESS SAE J 30 R7 N/L / +125 car & motorbike fuel system TBSE / +100 car & motorbike fuel system TBE / +90 car & motorbike fuel system AUTOGAS ECE 67/110 Class / +120 LPG/ CNG enges CARBOBLUE N/L / +100 nox reducg system CARBOBLUE N/L / +100 nox reducg system CARBOPRESS EN ISO 7840 A / +100 boat fuel system CARBOCORD EN ISO 7840 A / +100 boat fuel system CARBURITE EN ISO 7840 A / +100 boat fuel system SM/TR / +100 coolant le B2

3 Tube Reforcement Cover WP (bar) Safety factor Suction Industry standard Page EPDM textile EPDM 10 3 B4 EPDM textile EPDM 5 4 yes SAE J 20R2 - D1 B5 EPDM textile EPDM 6 3 B6 - B7 EPDM textile EPDM 10 4 DIN B8 NBR/SBR textile CR 15 4 SAE J 1402-A B9 NBR textile CR 10 4 SAE 30 R7 B10 NBR textile NBR/EPDM 10 3 B11 NBR textile 10 3 B12 NBR textile CSM ECE 67/110 B13 EPDM textile EPDM 10 3 B14 EPDM textile EPDM 20 3 B14 NBR textile NBR/SBR EN ISO 7840 A1 B15 NBR textile NBR/SBR EN ISO 7840 A1 B15 NBR textile NBR/SBR yes EN ISO 7840 A1 B16 NBR textile NBR/SBR yes EN ISO 7840 A1 B17 B3

4 RADIOR 10 Flexible rubber hose for delivery of hot water heatg and coolg of automotive LPG and methane systems. Black, smooth EPDM nitrosame free rubber compound Reforcement: Synthetic textile yarns Cover: Smooth, black, heat, ageg and weather-resistant EPDM nitrosame free rubber compound -30 C (-22 F) to C (+212 F) with peaks +120 C (+248 F) Specific for coolg system Also used combation with Autogas ECE 67/110 CNG/LPG enges Robust structure to avoid kkg Burst Pressure Value 3:1 Accordg to UNI EN ISO 1307 Workg Pressure m. IH / N IH / Y IH / Y RUBBER HOSE RADIOR 10 bar I.D. mm MADE IN ITALY B4

5 E-Z FORM GS Designed to handle air, coolant, mild chemicals and water. Extremely flexible, lightweight provides full suction capability and a path to conduct a static electrical charge to ground. The unique Greek cover corrugations provides mimal forceto-bend, superior kk resistance, and maximum flexibility for ease of handlg, used where formed hose might normally be required. Black EPDM, antistatic rubber compound Reforcement: Multiple textile plies with wire helix Cover: Black EPDM rubber compound resistant to weatherg, greek corrugated fish Saves time and costs thanks to easy and quick assembly Superior kk resistance, mimal force to bend, outstandg flexibility Performance equal to SAE J20R2-D1 Burst Pressure Value 4:1 Vacuum: 0.9 bar Accordg to UNI EN ISO C (-40 F) to +125 C (+257 F) Workg Pressure m. IH / Y IH / Y IH / N IH / Y IH / Y IH / Y IH / Y IH / Y IH / Y IH / Y IH / Y IH / Y IH / Y IH / Y IH / Y SERIES 7395 E-Z FORM GS HOSE 75 PSI MAX WP B5

6 RADIOR DIN 6 (coils) Designed for coolg systems of automotive enges and stationary enges and for refrigerant systems. Black, smooth, heat resistant EPDM rubber compound accordg to DIN * Reforcement: Synthetic textile fabrics yarns Cover: Black, smooth, wrapped fish, heat, ageg and weather-resistant EPDM rubber compound accordg to DIN * Compounds accordg to DIN for: tensile, strength, density, hardness, laceration, swellgs, agg and dry residue Specific for coolg system at high temperature For Automotive and general dustries application Burst Pressure Value 3:1 *The tube and the cover compounds are accordg to DIN the followg prcipal areas: tensile, strength, density, hardness, laceration, swellgs, agg and dry residue. -40 C (-40 F) to +125 C (+257 F) with peaks to +140 C (+284 F) I.D. 25 mm accordg to UNI EN ISO 1307 I.D. > 25 mm accordg to RMA steel mandrel Workg Pressure m. IH / Y IH / Y IH / Y IH / Y IH / Y IH / Y IH / Y IH / Y IH / Y IH / Y IH / Y IH / Y IH / Y IH / Y IH / N IH / N IH / Y RADIOR DIN A - I.D. x TH EPDM / P / EPDM 6 bar 125 C (yellow k x LL and yellow embossed x MM) Y/W (with traceability code) B6

7 RADIOR DIN 6 (cut length) Designed for coolg systems of automotive enges and stationary enges and for refrigerant systems. Black, smooth, heat resistant EPDM rubber compound accordg to DIN * Reforcement: Synthetic textile fabrics yarns Cover: Black, smooth, wrapped fish, heat, ageg and weather-resistant EPDM rubber compound accordg to DIN * *The tube and the cover compounds are accordg to DIN the followg prcipal areas: tensile, strength, density, hardness, laceration, swellgs, agg and dry residue. -40 C (-40 F) to +125 C (+257 F) with peaks to +140 C (+284 F) Compounds accordg to DIN for: tensile, strength, density, hardness, laceration, swellgs, agg and dry residue Specific for coolg system at high temperature For Automotive and general dustries application Burst Pressure Value 3:1 I.D. 25 mm accordg to UNI EN ISO 1307 I.D. > 25 mm accordg to RMA steel mandrel Workg Pressure m. IH / N IH / N IH / N IH / N IH / N RADIOR DIN A - I.D. x TH EPDM / P / EPDM 6 bar 125 C (yellow k x LL and yellow embossed x MM) Y/W (with traceability code) B7

8 NITROSAMINE-FREE Automotive & Boat AIRBRAKE DIN Accordg to DIN Widely used automotive air brake systems. Black, smooth EPDM nitrosame free rubber compound Reforcement: Stress-resistant, synthetic textile yarns Cover: Black, abrasion, ageg and weather-resistant, smooth EPDM nitrosame free rubber compound -40 C (-40 F) to + 70 C (+158 F) Recommended DIN and DIN fittgs and DIN 3017 clamps Automotive application Nitrosame free compounds Burst Pressure Value 4:1 Accordg to DIN Workg Pressure m. IH / N IH / N IH / Y IH / Y IH /80 * N *Not complyg the norm MADE IN ITALY I.D. mm DIN TÜV GEPRÜFT Year/Quarter with traceability code B8

9 AIRBRAKE SAE J 1402-A Accordg to SAE J 1402-A Widely used automotive air brake systems. Black, smooth, NBR/SBR rubber compound Reforcement: Synthetic textile yarns Cover: Black, smooth, abrasion, ageg and weather-resistant CR rubber compound -40 C (-40 F) to + 93 C (+200 F) Tighter tolerances on ID and OD Automotive application Superior cover compound resistant to abrasion and weatherg Burst Pressure Value 4:1 Accordg to SAE J1402 TABLE A Nomal Diameter Workg Pressure (mm) (ch) O.D. (mm) MPa psi bar kg/m mm m. IH / Y IH / Y IH / N IH / N AIRBRAKE I.D. ch (I.D. mm) SAE J 1402 A MADE IN ITALY B9

10 AUTOGAS ECE 67/110 Class 2 Accordg to ECE 67 and 110 Class 2 Low pressure hoses, designed accordg to regulation ECE 67, 01, Annex 8, Class 2 and ECE 110, 02, Annex 4b, Class 2. Suitable for low pressure delivery of LPG and methane CNG alternative fuel kits. Black, smooth, sulatg (R > 1 MΩ/m), LPG and methane permeation resistant NBR rubber compound Reforcement: Synthetic textile yarns Cover: Black, smooth, sulatg (R > 1 MΩ/m), CSM rubber compound resistant to ageg, heat, abrasion, ozone and weatherg Insulatg cover and tube compounds Exceeds DIN 4815 Teil 4 Available pre-formed on request Very low permeation values closed to zero Burst Pressure Value 4:1 Accordg to UNI EN ISO C (-13 F) to +120 C (+ 248 F) Workg Pressure m. IH / Y IH / Y IH / Y IH / Y IH / Y IH / Y IH / Y IH / Y Rubber Hose Autogas ECE67-L.P.G. class 2 (E13) 67R /ECE110 -CNG class 2 (E13) 110R mm Made italy 5/2012 2EG04 B10

11 CARBOPRESS SAE J 30 R7 Accordg to SAE J 30 R7 Low permeability, fire resistant hose, for lead and unleaded fuels car and motorbike enges and gearbox lubricants where high performance and compliance to standards are important issue. Hose meets the American Standard SAE J30 R7. Black, smooth, antistatic (R < 1 MΩ/m) NBR rubber compound, resistant to oils, fuels and unleaded petrol with aromatic content not exceedg 50 % Reforcement: Synthetic textile yarns Cover: Black, smooth, antistatic (R < 1 MΩ/m) CR rubber compound resistant to oils, abrasion, weather and fire Exceeds SAE J 30 R7 WP Antistatic cover and tube compounds Suitable for B100 up to 70 C Superior cover compound resistant to abrasion and weatherg Burst Pressure Value 4:1 Accordg to SAE J30 R7-40 C (-40 F) to +125 C (+257 F) Workg Pressure m. IH / N IH / N IH / Y IH / Y IH / Y IH / Y RUBBER FUEL HOSE CARBOPRESS SAE 30 R7 MADE IN ITALY (repeated every 300 mm) B11

12 TBSE Desigend for general applications fuel systems where low permeability levels are required. Suitable for leaded and unleaded fuels and diesel. Black, oil and fuel resistant, smooth, antistatic (R < 1 MΩ/m), NBR rubber compound Reforcement: Synthetic textile yarns Cover: Black, oil, fuel, abrasion, weatherresistant, smooth, antistatic (R < 1 MΩ/m), NBR/EPDM rubber compound -30 C (-22 F) to +100 C (+212 F) Antistatic cover and tube compounds Low permeability Suitable for B20 and E100 up to 70 C Available packagg reels for display stand Burst Pressure Value 3:1 Accordg to UNI EN ISO 1307 Coils IH / Y IH / Y IH / Y IH / Y IH / Y IH / Y Reels Workg Pressure m. IH /15-R90* Y IH /15-R90* Y IH /15-R90* Y IH /15-R90* Y IH /15-R90* Y IH /10-R60** Y * box quantity = 6 x 15 m (reels) ** box quantity = 6 x 10 m (reels) ORIGINAL ECO 1 TBSE MADE IN ITALY B12

13 TBE Designed for particular applications fuel systems where textile cover is requested. Suitable for leaded and unleaded fuels and diesel. Reforcement/ Cover: -20 C (-4 F) to +90 C (+194 F) Black, oil and fuel resistant, smooth NBR rubber compound High tensile polyester textile overbraid, resistant to abrasion, fuel, oil and weatherg Available reels only Suitable for B20 and E100 up to 70 C Designed for motorbike fuel supply Burst Pressure Value 3:1 On side diameter: + 0 / mm Length tolerance: ± 1 % Workg Pressure m. IH /15-R90* Y IH /15-R90* Y ORIGINAL TB ECO MADE IN ITALY B13

14 NITROSAMINE-FREE Automotive & Boat CARBOBLUE N/L Parker Global Product Carboblue is specially designed for applications where there is a requirement for extractg NOx (nitrogen oxide and its mixtures that emit polluted substances to the environment durg air combustion) and dramatically reducg exhaust gas from diesel enges. These objectives are cluded European parameters EURO IV and EURO V. Black, smooth, antistatic (R < 1 MΩ/m) and sulphur free EPDM rubber compound nitrosame free with peroxide curg. Extensive tests on tensile stress, cold bendg, heat, and laceration resistance on compound contact with the additive did not show alteration of its state. In addition, no contamation of the additive was present after 168 hours at the temperature of 70 C. Reforcement: Synthetic textile fabrics Cover: Black, smooth, antistatic (R < 1 MΩ/m), EPDM rubber compound nitrosame free, ageg, heat and weather resistant Compatibility approved by Ad-Blue manufacturer Environmental friendly Nitrosame free Available HW version to defrost and keep additive at the right temperature Burst Pressure Value 3:1-40 C (-40 F) +100 C (+212 F) with peaks up to +120 C (+248 C) Accordg to UNI EN ISO 1307 CARBOBLUE N/L 10 IH / N IH / N IH / N CARBOBLUE N/L 20 Workg Pressure m. IH / N IH / Y IH / N IH / Y IH / Y IH / Y IH / N IH / N RUBBER HOSE CARBOBLUE W.P. bar MADE IN ITALY B14

15 CARBOPRESS EN ISO 7840 A1 CARBOCORD EN ISO 7840 A1 Accordg to EN ISO 7840 A1 Fire resistant fuel hose suitable for loadg diesel, leaded and unleaded fuels with an aromatic content not exceedg 50 %, for small craft of - 24 m length of hull with permanently stalled board enges. Accordg to EN ISO 7840 type A1 permeability (4 g/m2 hour). Complies with the essential requirements given the European Directive for small craft 94/25/EC.. Black,smooth, antistatic (R < 1 MΩ/m), oil and fuel resistant NBR rubber compound Reforcement: Synthetic textile yarns Cover: Black, smooth, antistatic (R < 1 MΩ/m), CR rubber compound resistant to abrasion, oil, fuel, weather and fire resistant Type approval by RINA and Lloyd s Register Suitable for small craft accordg to European Directive 94/25/EC Fire resistant fuel hose Burst Pressure Value 8:1 Accordg to EN ISO C (-4 F) to +100 C (+212 F) CARBOPRESS EN ISO 7840 A1 IH / N IH / N IH / Y IH / N IH / Y IH / Y IH / Y CARBOCORD EN ISO 7840 A1 Workg Pressure m. IH /40* Y IH /40* N *Mandrel Made production RUBBER HOSE CARBOPRESS EN ISO 7840 A1 CE... MADE IN ITALY Year with traceability code RUBBER HOSE CARBOCORD EN ISO 7840 A1 CE... Year MADE IN ITALY B15

16 CARBURITE EN ISO 7840 A1 Accordg to EN ISO 7840 A1 Fire resistant fuel hose suitable for loadg diesel, leaded and unleaded fuels with an aromatic content not exceedg 50 %, for small craft of - 24 m length of hull with permanently stalled board enges. Accordg to EN ISO 7840 type A1 permeability (4 g/m2 hour). Complies with the essential requirements given the European Directive for small craft 94/25/EC. Black, smooth, antistatic (R < 1 MΩ/m), oil and fuel resistant NBR rubber compound Reforcement: Synthetic textile yarns and embedded steel wire helix Cover: Black, smooth, antistatic (R < 1 MΩ/m), NBR/SBR rubber compound resistant to abrasion, oil, fuel, weather and fire Type approval by RINA and Lloyd s Register Suitable for small craft accordg to European Directive 94/25/EC Fire resistant fuel hose Burst Pressure Value 8:1 Vacuum 0.9 bar -20 C (-4 F) to +100 C (+212 F) Accordg to EN ISO 7840 Workg Pressure m. IH / N IH / N IH / N IH / N RUBBER HOSE CARBURITE EN ISO 7840 A1 CE... Year MADE IN ITALY B16

17 SM TR 311 Accordg to EN ISO 7840 A1 and EN ISO Designed and approved for use water coolg exhaust gas systems and also as fire resistant fuel hose for craft. Suitable for general loadg and unloadg oils and fuel service. Black, smooth, antistatic (R < 1 MΩ/m), NBR rubber compound, resistant to exhaust gas, sea water, oil and fuel havg an aromatic content not exceedg 50 % Reforcement: Synthetic textile fabrics and embedded steel wire helix Cover: Black, smooth, antistatic (R < 1 MΩ/m), NBR/SBR rubber compound, resistant to flame, heat, oil and fuel, abrasion, ageg and weatherg -20 C (-4 F) to +100 C (+212 F) Type approval by RINA and Lloyd s Register Designed for exhaust gas and refuelg Suitable for craft accordg to European Directive 94/25/EC Fire resistant fuel hose Burst Pressure Value 6,5:1 Vacuum 0.8 bar On side diameter I.D. 38 mm ± 0.79 mm I.D mm ± 1.50 mm I.D mm ± 2.00 mm Length tolerance ± 1 % Note Ondulated version on request Workg Pressure m. IH / Y IH / Y IH / Y IH / Y IH / Y IH / Y IH / Y IH / Y IH / Y IH / Y IH / N IH /15 * N *Comply only EN ISO RUBBER HOSE SM/TR EXHAUST AND FUEL HOSE - I.D. mm - CE... - NORDIC BOAT STANDARD 1990 EN ISO 7840 A1 - EN ISO 13363:2004 Type 2 Class B - Quarter Year MADE IN ITALY B17