Additional Instructions MHC-1 J1939

Size: px

Start display at page:

Download "Additional Instructions MHC-1 J1939"

Stanley Hudson
6 years ago
Views:

1 Page 1 of 7 / Additional Instructions MHC-1 J1939 Contents 1. Quick Start Guide Network Management Device Name CAN-Identifier EasyCom J System requirements Main Window Working Pane Supported PGN/SPN Signal Ranges and Error Code Abbreviations References... 7

2 Page 2 of 7 / Quick Start Guide Connect the CAN interface to your PC (e.g. PEAK PCAN-USB) and to the pressure transmitter and start the CAN-Software (e.g. PEAK PCAN-View). When the MHC-1 is powered up it sends an Address-Claimed-Message e.g. ID DLC Data 18EEFF80 8 Device Name Further details see chapter 2. Network Management. After that the MHC-1 starts sending measured values Further details see chapter 4. Supported PGN/SPN. The configuration can be changed with EasyCom J1939 software. Further details see chapter 3. EasyCom J Network Management 2.1 Device Name AAC Industry Group Vehicle System Instance Vehicle System Res. Function Function Instance ECU Instance Manufacturer Code Identity Number 1 bit 3 bit 4 bit 7 bit 1 bit 8 bit 5 bit 3 bit 11 bit 21 bit Manufacturer Code: Identity Number: 452 dez unique serial number 2.2 CAN-Identifier Priority Res. Data Page PDU Format PDU Specific Source Address 3 bit 1 bit 1 bit 8 bit 8 bit 8 bit

Page 3 of 7 / 14.06.13 3. EasyCom J1939 3.

2 Main Window After pressing the button Find Device the software waits for 5 seconds to receive an Address Claimed message.

3 Page 3 of 7 / EasyCom J System requirements Microsoft operating system (Microsoft Windows XP, Microsoft Windows 7) PCAN-USB CAN-Interface (PEAK-System Technik GmbH) 3.2 Main Window After pressing the button Find Device the software waits for 5 seconds to receive an Address Claimed message. Within that time the user has to connect the pressure transmitter. If an Address Claimed message is received, the address of the connected pressure transmitter is displayed. By pressing the buttons J1939 Read or J1939 Write the current configuration of the pressure transmitter is read from or written to the transmitter. 3.3 Working Pane General Information J1939 Name J1939 Identifier PGN/SPN

4 Page 4 of 7 / Supported PGN/SPN PGN SPN Description [ms] pressure range Valve Pilot Pressure bar Hydraulic Fan 2 Motor Pressure ,275 bar Aftertreatment 2 Fuel Pressure ,255 bar Aftertreatment 1 Fuel Pressure ,255 bar Aftertreatment 2 Secondary Air Pressure ,255 bar Aftertreatment 1 Secondary Air Pressure ,255 bar Engine Intake Valve Actuation Oil Pressure for Cylinder # ,255 bar Engine Intake Valve Actuation Oil Pressure for Cylinder # ,255 bar Engine Intake Valve Actuation Oil Pressure for Cylinder # ,255 bar Engine Intake Valve Actuation Oil Pressure for Cylinder # ,255 bar Engine Intake Valve Actuation Oil Pressure for Cylinder # ,255 bar Engine Intake Valve Actuation Oil Pressure for Cylinder # ,255 bar Engine Intake Valve Actuation Oil Pressure for Cylinder # ,255 bar Engine Intake Valve Actuation Oil Pressure for Cylinder # ,255 bar Engine Intake Valve Actuation Oil Pressure for Cylinder # ,255 bar Engine Intake Valve Actuation Oil Pressure for Cylinder # ,255 bar Engine Intake Valve Actuation Oil Pressure for Cylinder # ,255 bar Engine Intake Valve Actuation Oil Pressure for Cylinder # ,255 bar Engine Intake Valve Actuation Oil Pressure for Cylinder # ,255 bar Engine Intake Valve Actuation Oil Pressure for Cylinder # ,255 bar Engine Intake Valve Actuation Oil Pressure for Cylinder # ,255 bar Engine Intake Valve Actuation Oil Pressure for Cylinder # ,255 bar Engine Intake Valve Actuation Oil Pressure for Cylinder # ,255 bar Engine Intake Valve Actuation Oil Pressure for Cylinder # ,255 bar Engine Intake Valve Actuation Oil Pressure for Cylinder # ,255 bar Engine Intake Valve Actuation Oil Pressure for Cylinder # ,255 bar Diesel Particulate Filter Intake Pressure ,255 bar Diesel Particulate Filter Outlet Pressure ,255 bar Diesel Particulate Filter Intake Pressure ,255 bar Diesel Particulate Filter Outlet Pressure ,255 bar Aftertreatment 2 Supply Air Pressure ,255 bar Aftertreatment 2 Purge Air Pressure ,255 bar Aftertreatment 1 Supply Air Pressure ,255 bar Aftertreatment 1 Purge Air Pressure ,255 bar Aftertreatment 2 Fuel Pressure ,255 bar Aftertreatment 1 Fuel Pressure ,255 bar Cab A/C Refrigerant Compressor Outlet Pressure bar Hydraulic Brake Pressure Circuit bar Hydraulic Brake Pressure Circuit bar Bellow Pressure Front Axle Left ,255 bar Bellow Pressure Front Axle Right ,255 bar Bellow Pressure Rear Axle Left ,255 bar

5 Page 5 of 7 / PGN SPN Description [ms] pressure range Bellow Pressure Rear Axle Right ,255 bar Engine Oil-Filter Outlet Pressure bar Engine External Shutdown Air Supply Pressure ,275 bar Engine Pre-filter Oil Pressure bar Engine Auxiliary Coolant Pressure bar Engine Turbocharger Wastegate Actuator Control Air Pressure bar Engine Turbocharger Lube Oil Pressure bar Engine Turbocharger 1 Boost Pressure ,31875 bar Engine Turbocharger 2 Boost Pressure ,31875 bar Engine Turbocharger 3 Boost Pressure ,31875 bar Engine Turbocharger 4 Boost Pressure ,31875 bar Brake Application Pressure High Range, Front Axle, Left Wheel ,5 bar Brake Application Pressure High Range, Front Axle, Right Wheel ,5 bar Brake Application Pressure High Range, Rear Axle #1, Left Wheel ,5 bar Brake Application Pressure High Range, Rear Axle #1, Right Wheel ,5 bar Brake Application Pressure High Range, Rear Axle #2, Left Wheel ,5 bar Brake Application Pressure High Range, Rear Axle #2, Right Wheel ,5 bar Brake Application Pressure High Range, Rear Axle #3, Left Wheel ,5 bar Brake Application Pressure High Range, Rear Axle #3, Right Wheel ,5 bar Pneumatic Supply Pressure bar Parking and/or Trailer Air Pressure bar Service Brake Air Pressure Circuit # bar Service Brake Air Pressure Circuit # bar Auxiliary Equipment Supply Pressure bar Air Suspension Supply Pressure bar Hydraulic Fan Motor Pressure ,275 bar Engine Turbocharger Lube Oil Pressure bar Engine Fuel Delivery Pressure bar Engine Oil Pressure bar Tire Pressure bar Clutch Pressure bar Transmission Oil Pressure bar Drive Axle Lift Air Pressure bar Drive Axle Lube Pressure bar Steering Axle Lube Pressure bar Brake Application Pressure bar Brake Primary Pressure bar Brake Secondary Pressure bar Hydraulic Retarder Pressure bar Engine Gas Supply Pressure ,275 bar Auxiliary Pump Pressure bar

6 Page 6 of 7 / Manufacturer specific PGN/SPN: PGN SPN Description [ms] pressure range Scaling Offset Length Start Position WI01 General purpose 60 bar bar 1.5 mbar / bit WI02 General purpose 100 bar bar 2.5 mbar / bit WI03 General purpose 160 bar bar 4 mbar / bit WI04 General purpose 250 bar bar 6.25 mbar / bit WI05 General purpose 400 bar bar 10 mbar / bit WI06 General purpose 600 bar bar 15 mbar / bit WI07 General purpose 1000 bar bar 25 mbar / bit WI08 General purpose 1000 psi psi 25 mpsi / bit WI09 General purpose 1500 psi psi 37.5 mpsi / bit WI10 General purpose 2000 psi psi 50 mpsi / bit WI11 General purpose 3000 psi psi 75 mpsi / bit WI12 General purpose 5000 psi psi 125 mpsi / bit WI13 General purpose psi psi 250 mpsi / bit Signal Ranges and Error Code Signal Ranges 1 byte 2 byte Valid Signal Parameter specific indicator Reserved range for future indicator bits Error indicator* Not available or not requested According to SAE J (Table 1) x00 0xFA 251 0xFB xFC 0xFD 254 0xFE 255 0xFF x0000 0xFAFF xFB00 0xFBFF xFC00 0xFDFF xFE00 0xFEFF xFF00 0xFFFF *on 2-byte-transmission: Low-Byte contains the error code: error code internal CRC error pressure overflow pressure underflow not used (always 0)

7 Page 7 of 7 / Abbreviations AAC ECU PDU PGN SPN Arbitrary Address Capable Electronic Control Unit Protocol Data Unit Parameter Group Number Suspect Parameter Number Transmission Repetition Rate 7. References SAE J1939 set of profiles Introduction to J1939 (Vector Informatik GmbH,

Pressure Transmitter M01-CAN with J1939. Manual M01-CAN. Pressure Transmitter with J Einwegpause -

Pressure Transmitter M01-CAN with J1939. Manual M01-CAN. Pressure Transmitter with J Einwegpause - Manual M01-CAN Pressure Transmitter with Created: 06..2008 Revision date: 08.04.2009 Approved: 20..2009 M. Breuer A. Krug R. Jung Page 1 of 9 Table of Contents 1 History... 3 2 General... 4 3 CAN Interface...