MAY 2001 STREET ROD PRODUCTS.

Transcription

1 MAY 2001 STREET ROD PRODUCTS

2 WHERE TO FIND US STORE ADDRESS 875 DRURY LANE, UNIT #1 BURLINGTON, ONTARIO, CANADA L7R 2Y4 OFFICE 882 GLENVIEW AVENUE BURLINGTON, ONTARIO, CANADA L7T 3Y6 Tel Fax

3 Index A Actuators, Gear Drive...15 Air Suspension...18 Accessories...20 Air Springs - Bellows...18 Air Springs - Sleeves...19 Aluminum Brackets...5 Aluminum Gauge Panels...1 Aluminum Radiators, Be Cool...2 Antenna, Cat...13 Flush Mount Mini...3 B Be Cool Aluminum Radiators...2 Big Al s Pedals...3 Brake Cables...4 Brake Kits...5 Brake Light Switch Relay...13 Brake Light Switches...10 Brake Pedal...7 Brake Handle, Emergency...3 C Cables, Kickdown...4 Throttle...4 Cat Antenna...13 Credit Card Ignition...14 D Dash Inserts, Aluminum...1,7 Daytime Running Light Module...13 Dip Sticks...3 Door Jamb Interior Light Switches...10 Door Latches...15 Door Poppers...10 Drive Shafts...7 E Electronic Rad Fan Relay...12 Emergency Brake Handle...3 Exterior Rear View Mirrors...10 F Flaming River Products...8 Flush Mount Mini Antenna Kit...3 Frames...17 Fuse panels...13 G Gas Pedal...3,7 Gas Tanks...16 Gauge Panels, Aluminum...1 Gear Drive Actuators...15 Gennie Shifter...3 H Hand Brakes...3 Headlight Switch...16 Hidden Hinges...5 Hood Latches...15 Hood Prop...3 I Interior Door Latch Kit...11 Interior Insulation Kit...14 Interior Lights...14 K Kickdown Cables...4 Knobs...16 L Latches...15 License Frames...4 Lighted Shift Indicators...3 Lite 'n' Bolts...12 Lights, Interior...4,14 M Magnetic Proximity Switch Kit...12 Magnum Shooters...13 Master Power Disconnect...16 Mirrors, Rear View, Exterior...7,10 Rear View, Interior...7 Motor/Transmission Mounts...5 Mustang II Front Crossmembers...16

4 Mustang II Rack...8 P Power Steering Hose Kit...12 Power Windows...1 Pressure Gauge, Tire...16 Products by Sun Specs...7 Prooducts by Thin Man Fabrications...16 Pulleys...6 R Rad Fan Relay Kit...12 Radiators, Aluminum...2 Rear View Mirrors, Exterior...10 Remotes...12 Rocker Switches...12 S Shifter Accessories...3 Shifters...3 Steering U-Joints...8 Steering Rack, Mustang II...8 Switches, Door Jamb...10 Power Window...1 T Throttle Cables...4 Throttle Return Spring...7 Tire Pressure Gauge...16 Trunk Lid Supports...7 Tubular Strut Rods...16 Tubular Upper and Lower A- Arms...16 V VDO Instruments...1 Vibration Resistor, Steering...8 W Water Necks...7 Windows, Power...1 Wiper Motors...5

5 UNIVERSAL POWER WINDOW KIT * SLIM DESIGN (1-7/8" at widest point) * GEAR DRIVEN CABLE OPERATOR * SMOOTH-QUIET OPERATION KIT INCLUDES : 2 POWER REGULATORS 2 GLASS CHANNELS INSTRUCTIONS PRICE...$ SWITCH KIT 2 SWITCHES WITH BEZELS WIRING DIAGRAM CONNECTORS PRICE...$40.00 VDO INSTRUMENT GAUGE KITS GAUGE KITS AVAILABLE IN ALL STYLES. GAUGES ALSO AVAILABLE AS SINGLE UNITS. ASK FOR PRICING. CUSTOM ALUMINUM GAUGE PANELS CREATED BY HERITAGE METALWORKS MANY STYLES IN STOCK, INDIVIDUALLY PRICED. LET US CUSTOM BUILD A PANEL OR TRIM PIECES FOR YOU. We Are Also a Distributor for; Afco Dakota Digital Heritage Metalworks Flaming River Master Brake Hal Shocks Fastlane Automotive Kugel Komponents Thin Man Fabrications Gennie Shifter Newport Engineering International Wholesale MBRP Stainless Exhaust Parts Williams Gas Doors SunSpecs VDO ProsPick/The WireForce Downs Manufacturing Quickor Suspension Co. Look for Pricing as Stock Becomes Available. Call Us for a Quote on Your Needs. PRICES SUBJECT TO CHANGE WITHOUT NOTICE

6 We are now a distributor for Call for Applications Information and Pricing. Made in the USA, high quality Be Cool radiators are available for specific car and truck applications without the need for major modifications. Be Cool radiators are compatible with all coolants. 2

7 PRODUCTS BY GENNIE SHIFTER SHIFTERS Gennie Shifter (Ultra)... $ Boot Kit (Shifter)... $31.50 Rear Mount Shifter... $ SHIFTER ACCESSORIES Aluminum Shift Knob (Engraved - For Gennie Shifter) $21.00 Aluminum Stick - 16 or $40.00 Back-up Switch... $28.00 Neutral Safety Switch... $28.00 FLUSH MOUNT MINI ANTENNA KIT AM/FM Semi-Auto... $ AM/FM Fully Auto... $ Extension Cable... $12.50 AM/FM/CB Semi-Auto... $ COLUMN PARTS Aluminum Shift Knob Plain w/set Screw... $16.50 Aluminum Shift Knob Engraved w/set Screw... $21.50 Column Dress-up Kit... $38.00 Boot Kit (Rear Mount)...$25.00 Swan Shifter $ LIGHTED SHIFT INDICATORS Shift Boot Indicator...$76.00 R/M Boot Indicator...$70.00 Dash Mounted Indicator...$73.00 Dash Indicator for Column Shifts (Fits Kugel s Arms)...$76.00 AM/FM/CB Fully Auto...$ CB Ext. Cable...$12.50 Waterproofing Kit...$9.00 HAND BRAKES Gennie Hand Brake...$ Boot Kit (Gennie Brake)...$25.00 LO-LINE Plus...$ Boot Kit (LO-LINE)...$25.00 GAS PEDALS Chromed Spoon... $63.00 Stainless Spoon... $89.00 Chrome w/aluminum Pad... $89.00 Chrome w/aluminum Pad w/rubber Insert... $89.00 Stainless Steel w/aluminum Pad... $ Stainless w/aluminum Pad w/rubber Insert... $ Stealth Pedal (Ball-Milled or Rubber Insert)... $ Stealth Boot... $10.00 Brake Stainless Steel Pad w/rubber Insert... $35.00 Aluminum Brake Pad... $35.00 Dimmer Switch Cover - Stainless or Aluminum... $11.50 BIG AL S PEDALS Billet Throttle... $ Brake Pad... $35.00 Dimmer Switch Pads... $16.00 DIP STICKS Braided Transmission Mount... $67.00 Braided Firewall Mount... $72.00 Chevy Dipstick - Early Small Block... $16.00 Big Block Chevy Dipstick - Flexible... $50.00 Late Model Chevy Small Block Dipstick - Flexible... $50.00 Early Model Chevy Small Block Dipstick - Flexible... $50.00 HOOD PROP Ford (except 33-34)... $25.00 Ford $35.00 GM - Early... $38.00 Under-Hood Light... $6.00 3

8 THROTTLE CABLES STD (works with Elec. 400 K/D)... $38.00 Braided (works with Elec. 400 K/D)... $48.00 Ultra... $50.00 Stealth... $57.00 Stealth 400 (Use with Elec. 400 K/D)... $54.00 T.P.I. - STD (Use with Factory Bracket)... $54.00 T.P.I. - Braided (Use with Factory Bracket)... $48.00 Stealth T.P.I. (Use with Factory Bracket)... $54.00 T.P.I. Machined Aluminum Bracket. $38.00 Ultra T.P.I. (For Aluminum Bracket)... $50.00 Ultra Stealth T.P.I. (For Aluminum Bracket)... $54.00 Ultra LT-1... $50.00 Ultra Stealth LT-1... $54.00 KICKDOWN CABLES LT-1 Kick-Down Bracket Kit...$78.00 Kick-Down - STD (Specify Transmission)...$42.00 Kick-Down - Braided (Specify Transmission)...$50.00 Kick-Down - Ultra (Carb Hook-up) Machined Aluminum...$50.00 Kick-Down - TPI Braided 350 (For Factory Bracket)...$57.00 Kick-Down - TPI Braided 700 (For Factory Bracket)...$57.00 Kick-Down - Ultra TPI/LT (For Aluminum Bracket)...$57.00 Kick-Down - Ultra TPI/LT (For Aluminum Bracket)...$57.00 Kick-Down - Electric (400)...$38.00 Dual Throttle - Spring (Stainless Steel)...$7.50 BRAKE CABLES GS2 - For Drum Brakes - Fits our Gennie Hand Brake... $97.50 GS1 - For Jag. Rears - Fits our Gennie Hand Brake... $63.00 UN2 - For Drum Brakes - Universal Design... $97.50 UN1 - For Jag. Rears - Universal Design... $63.00 FF1 - Flat Fendered Single Cable... $42.00 Cable Clamp Kit... $10.00 Clevis Kit (Specify 1/4 or 5/16 pin)... $20.00 Corvette Clevis Kit... $28.00 Stainless Line Clamps... $4.25 Stainless Headlight Bars - Straight center A s and 32 s... $ VD center for A s w/32 shell... $ Bolt and Pad Kit - For our 32 headlight bars... $22.50 Rubber Pads... $11.50 LICENSE FRAMES Aluminum or Black Anodized... $32.00 Polished... $38.00 Chromed Aluminum... $50.00 License Frame w/light... $63.00 Polished w/light... $72.00 License Frame w/3 rd Brake and Tag Light... $88.50 Polished w/3 rd Brake and Tag Light... $96.00 T-SHIRTS Men s... $12.50 LITES Small-GL-SF... $15.00 Large-GL-DF... $17.50 Wilwood Proportioning Valve... $70.00 Residual CK Valves 2lb or 10lb... $31.00 Air Cleaner/Dist. Cover (Single 4-bl)... $

9 BRAKE KITS GM ROTOR/CALIPER TO MUSTANG II SPINDLE BRAKE ADAPTER KIT...$ Basic kit gives adapters, bushings, grade 5 mounting hardware, instructions including part numbers for bearings and seals. FORD GRANADA/GM CALIPER TO MUSTANG II SPINDLE...$ Kit includes instructions, hardware, and seals. BRAKE HOSE KIT...$95.00 Stainless steel braided lines, with Teflon liners. 3/16 and 1/4 available. Kit includes 2 flex lines, 2 AN to 3/16 tube adapters, 2 AN to caliper adapters/washers. Adapter bolts also available. Please specify make and style of caliper, SAE or metric... $25.00/pr MOTOR/TRANSMISSION MOUNTS WELD-IN MOTOR MOUNTS...$90.00 Chevrolet V8 to most makes and years. Weld in using stock GM motor mounts. TRANSMISSION MOUNTS...$35.00 GM Turbo 350 to Ford. Other kits available on request. WIPER MOTORS BY NEWPORT ENGINEERING These top quality wiper motors, made in the USA, bolt into Stock Vacuum Location, using stock mounting, linkage, etc. Two Speed Motor, Complete with switch and necessary mounting hardware...$ PRODUCTS BY WINDSOR FABRICATIONS Hidden Hinges : Popular models in stock. Complete with necessary installation hardware and clear, concise instructions....$250.00/pr Any Fibreglass Part or Body by Windsor can be ordered in. Call for a quote on your needs. Aluminum Brackets Alternator - Air Conditioning Compressor Bracket, One Piece For Small or Big Block Chev - By J-B Aluminum... $ Individual Aluminum Brackets Will fit Small Block Chev... $140.00/ea... $270.00/pr 5

10 Aluminum Pulleys for Chevy V8 s All prices quoted in pictures are for Machined Finish. A $30.00 Premium is added to cost of ALL Polished pieces. Buy a 4 OR 5 piece pulley set and save 10% from the listed prices. Example - Short Water pump, Small Block, Single Groove Individual total (4 pcs) $ Less 10% $ $ Add the A/C Compressor Cover for $52.00 Example - Short Water pump, Small Block, Double Groove Individual total (4 pcs) $ Less 10% $ $ Add the A/C Compressor Cover for $

11 Aluminum Water Necks (For Chevy) #6250 Straight Up - Polished... $48.00 # Swivel - Polished... $75.00 # Swivel - Polished... $35.10 Throttle Return (Dual) Spring Kit Chromed - # $ Stainless Overflow Tank (#9973)... $95.00 Aluminum Wire Loom (#8451)... $ PRODUCTS BY SUN SPECS Sam Foose Designed Outside Mirrors Long or Short Arm...$ Rectangular Inside Rear View Mirrors Glue On...$72.00 Bolt On...$80.00 Dash Inserts Chev Trucks (For VDO Gauges)...$ Any Other Sun Specs Products - Special Order - Ask for Pricing DRIVE SHAFTS Yes, Lec-Triks can supply your needs in a new custom-made balanced drive shaft. We need from you, your Slip-Joint (yoke) and Customer Measurements as shown on the form at the back of this catalogue. Prices start at $ QUALITY COMPONENTS BY MSM Highest Quality Billet Aluminum Components. Made in USA. Gas Pedal Features...$ Slim Pedal Profile - Wide Mounting Base. - 1/4-20 Mounting Holes. - Concealed Spring Arm. - No Exposed Roll Pin T6 Aluminum. - Genie Shifter and Lokar Cable Compatible. - All Hardware used, including pedal spring is of Stainless Steel. Brake Pedal Features...$ T6 Aluminum. - Fine-Thread Mounting Hardware. - Top Quality 7

12 FLAMING RIVER PERFORMANCE PRODUCTS We are now a warehouse distributor for Flaming River and will be inventorying a large selection of steering joints, shafts and new Vega and Mustang II style steering boxes. Manual rack and pinion. Examples: (Flaming River) Competitive Pricing. FR1002K LITTLE SWITCH - KEYED... $36.00 FR1500 VEGA BOX... $ FR1502 MUSTANG II R/P... $ FR1600 MOUNTING BUSHINGS FOR R/P... $30.00/pr FR1601 OUTER ENDS... $36.00/pr FR1850 PL 18 DD PLATED SHAFT... $77.00 FR1851 PL 36 DD PLATED SHAFT... $ FR1706 DD 3/4 x 3/4 DD U-JOINT... $ FR1810 SUPPORT BEARING 3/4... $40.00 DD Unplated Shafts. Vary in price, depending on length. From... $22.00 Short To... $35.00 Long Splined Plated Shafts 4 to $ to $74.00 Double Steering U-Joints... $ Vibration Resistor U-Joints... $ Vibration Resistor Coupler Male or Female... $ PL Vega 6 Pitman Arm... $ FR Omni Rack Rear Steer... $ FR Rack Extender Kit (Truck)... $92.50 (includes new bellows) FR Rack Extender Kit (Truck)... $92.50 (includes new bellows) NEW!! FLAMING RIVER STEERING COLUMNS Aluminum Non-Tilt Roadster Column... $ Paintable Tilt, No Shifter - 30, 32, 35 Lengths... $ Paintable Tilt with Shifter... $ Stainless Steel Tilt, No Shifter 30, 32, 35 Lengths... $ Chrome Tilt Column with Gearshift 28, 30, 33 Lengths... $ Steel Tilt Column, Camero $ Stainless Column, Camero $ SEE AD ON NEXT PAGE

13

14 BRAKE LIGHT SWITCHES LEVER STYLE BRAKE LIGHT SWITCH For those who do not like an inline pressure switch... $20.00 HANGING PEDAL BRAKE LIGHT SWITCH With secondary contacts for Cruise Control release. Universal Mounting. Top Quality... $25.00 INLINE PRESSURE BRAKE SWITCH, with pigtail... $ /16 T for Pressure Switch Installation... $15.00 DOOR POPPERS Aluminum-bodied, Bronze-bushed, Spring-loaded door poppers by SunSpec. The strongest on the market. Come complete with Stainless Steel installation hardware.... $37.50/ea. DOOR JAMB INTERIOR LIGHT SWITCHES Screw Mount... $5.00 Clip Mount... $5.00 VISION HOT ROD CONCEPTS EXTERIOR REAR VIEW MIRRORS These quality mirrors, moulded from urethane plastic, are available in four styles. They are sandable and paintable for a perfect match and fit, and are designed especially for Street Rods and Customs. The mirror surface is fully adjustable and is "installed by you" for ease of painting... $175.00/pr VF1 VF2 INDY 10

15 VISION HOT ROD CONCEPTS BILLET ALUMINUM INTERIOR DOOR LATCH KIT Mounts inside Poly Bezel which may be painted to compliment your interior colours. Two Door Kit... $ SLICK LITES STOP, TAIL & TURN LIGHT UNITS pleasing elliptical shape compliments most any car 3 deep frenched plastic housing is bondable to glass body components and is easily trimable to conform to flat or curved surfaces flush mount version can be used on steel panels two (2) piece housing makes for an easier installation weather proof socket assembly uses standard 3157 bulbs reflective lens measures 6 w x 2.5 h at centers mount either horizontal or vertical kit includes: 2 complete units with installation instructions Flush... $125.00/pr Frenched... $170.00/pr 11

16 3 - CHANNEL REMOTE REMOTES Control up to three functions on your vehicle with a single remote. Comes complete with receiver, 3 relays, connectors and 2 transmitters... $ CHANNEL REMOTE Control up to nine functions on your vehicle with a single remote. Comes complete with receiver, relays, connectors and 2 transmitters... $ MAGNETIC PROXIMITY SWITCH KIT Used to activate electric door actuators. Kit for two doors comes with master shutoff key switch, two relays, two reed switches, and two turned aluminum key fobs....$90.00 Also available for one door or trunk lid... $50.00 POWER STEERING HOSE KIT Connects GM power steering pump to Ford Mustang II power rack... $ Lite 'N' Bolts By The Wireforce. High Quality, Stainless Steel, Illuminated Licence Plate Installation Hardware Kit. Made up of 2 Stainless Steel Illumination Bolts, and 2 Regular Stainless Bolts/Nuts. Canadian Made... $40.00 HEAVY DUTY EURO STYLE ROCKER SWITCHES SPST (ON/OFF)... $10.00 SPDT (ON1/ON2/OFF)... $10.00 SPDT (ON1/ON2/HOT PARK)... $12.00 RAD FAN RELAY KIT Thermostatically controls your electric rad fan. The fan runs when the coolant temperature reaches 187 f, and stops once the coolant temperature has dropped to 167 f. Available with 1/2" NPT or 3/8" NPT thermostat... $45.00 ELECTRONIC RAD FAN RELAY CONTROL KIT --- NOT FOR VDO GAUGE KITS --- Works in conjunction with your electric temperature gauge... $

17 BRAKE LIGHT SWITCH RELAY Prevents brake switch failure by removing the load from the brake switch and placing it through a relay. A must for halogen brake lights or multiple, (more than three), brake lights... $22.00 DAYTIME RUNNING LIGHT MODULE Lights are turned on when the car is started, and control is returned to the driver when the headlight switch is activated... $22.00 WIRING HARNESS KIT Completely wire your vehicle. Includes numbered packages containing wire and hardware for each circuit. Complete instructions referencing each package. Includes headlight switch, flashers, brake switch, etc... $ CAT ANTENNA The rodless antenna. This Canadian-made antenna works as well as any rod-type antenna. It can be mounted anywhere on a 'glass'-bodied car, but must be mounted on fixed window glass of a steel-bodied car... $80.00 MAGNUM SHOOTERS Single Contacts... $15.00/Door Double Contacts... $19.00/Door Quadruple Contacts... $30.00/Door 5 - Contacts... $35.00/Door FUSE PANELS 14 Circuit Fusing Sub Panel...$90.00 Contains positions for 14 ATO fuses or resettable breakers. Fuses are arranged in two groups, 8 circuits for "bat", 6 circuits for "ACC/IGN" key positions. Includes ground strip for glass-bodied cars. FUSE PANEL ADD-ONS Six circuit add-on for above fuse panel. Bolts on to panel and provides an additional six circuits... $

18 INTERIOR LIGHTS SMALL ROUND LIGHT...$ o swivel, 3 watt light. Approximately 2.62" in diameter. 1.5" deep. Matte black finish. Use with door switches to turn on. LARGE ROUND LIGHT $ o swivel, 5 watt light. Approximately 3" in diameter. Matte black finish. Has switch built into unit. RECTANGULAR LIGHT...$18.00 Pivot switch lens, 5 watt light. Approximately 4.0" x 1.75". Matte black finish. Can be wired to turn on with door switch as well as for manual operation. CREDIT CARD IGNITION Now, a tamper-proof ignition that completely personalises your vehicle operation! No more worries about someone using a duplicate or master key to borrow your car. Case is 1 3/8" high x 3 3/4" wide x 4 5/8" deep and can be mounted either from the front or rear of the dash. Each unit comes with three coded punch cards and your card code number, for ordering replacement cards. MODEL Credit Card Switch...$ Compatible with 3000 series controls, it is intended to code out and secure your ignition output lead. This model is also intended for internal body panel mounting, to operate electric door lock solenoids. MODEL Credit Card Ignition Switch...$ Designed for operation of both ignition and starter. Insert card for ignition on; push card in to start, release and card springs back to running position. Remove card to secure vehicle. INTERIOR INSULATION KIT Combination jute insulation and foil. insulates against heat and noise for use on firewall, floor, trunk same as that used in new luxury cars Roll of insulation and sound deadener... $

19 SLAM LATCHES ROTARY CASE-MOUNTED LATCH ASSEMBLY...$35.00 Two stage latches with primary and secondary latching capabilities. Left and right versions available. Complete with striker bolt and bellville washer. SLIMLINE ROTARY CASE-MOUNTED LATCH ASSEMBLY...$40.00 To be used where space is a consideration. They work very well in thin doors, such as Model A's. Left and right versions available. Complete with striker bolt and bellville washer. ROTARY FLANGE-MOUNTED LATCH ASSEMBLY...$42.00 Ideal for trunk lids. These latches are not recommended for use in doors. Complete with striker bolts and bellville washer. ROTARY HOOD LATCH...$35.00 Approximately 2.5" x 1.25". Uses the same rotary double latch action of latemodel latches. Appropriate for hoods or trunks. Not suitable for doors. HOOD LATCHES We now have 2 new styles of OEM hood latches. Both units are cable release actuated. Basic unit does not have Secondary Safety Latch... $90.00 Deluxe Hood Latch with Secondary Safety Latch... $ GEAR DRIVE ACTUATORS ACT50N - 50 newtons, strongest of any door actuators on the market, push/pull... $45.00 ACT35N - 35 newtons, most popular size and style of gear drive actuator, push/pull... $40.00 ACT26N - 26 newtons, ideal for trunk locks, push/pull... $

20 ADDITIONAL ITEMS Headlight Switch, GM Style With Custom Aluminum Knob... $50.00 Speedo-Cable Adaptors - GM, Ford, Chrysler To 5/8" VDO... $20.00 VDO Tire Pressure Gauge... $30.00 Universal Aluminum Headlight/Wiper Control Knobs... $9.00 Master Power Disconnect... $30.00 Plastic Tube for wiring through door post... $12.00/pr ALUMINUM TRUNK LID SUPPORTS By Michael Thomas Enterprises. Anodized Aluminum with Stainless Steel hardware. Two lengths to choose from $72.00/ea $75.00/ea. GAS TANKS Yes we can now supply CUSTOM Aluminum Gas Tanks. Give us your sketch, with exact measurements, and let us quote you. Pricing starts at $ PROODUCTS BY THIN MAN FABRICATIONS MUSTANG II FRONT CROSSMEMBERS...$ Designed to fit and work properly in your street rod. Kits available for most makes and models. Talk to us for your needs. TUBULAR UPPER AND LOWER A-ARMS...$675.00/set Uses Chrysler screw-in style ball joints. Designed to work with above crossmembers. TUBULAR STRUT RODS...$150.00/pr Designed to remove much of the binding normally associated with stock style Pinto/Mustang II strut rods. FRAMES... See order forms on next page Other frames available - Pricing upon request. 16

21 FRAMES BY THINMAN FABRICATIONS QTY DESCRIPTION /34 Ford PRICE AMOUNT Fully boxed frame 1/8 mild steel $2300 Center cross 1x1½ 1/8 wall mild steel tube Front crossmember for MustangII 1 x1/8 Tubular upper - lower control arms(your top cross $630 shafts) Engine trans. Mount $200 Front sway bar $200 Front GM calp. Mounts $115 Brake pedal $200 Rear spreader bar bumper mount $140 Rear leaf springs - hardware $575 Front 4 bar $460 Rear 4 bar set (Coil-overs extra) $515 Triangulated 4 bar set $460 Subtotal Tax Rate Tax Freight Total Due QTY DESCRIPTION Ford PRICE AMOUNT Fully boxed frame 1/8 mild steel $2530 Center cross 1x1½ 1/8 wall mild steel tube Front crossmember for MustangII 1 x1/8 Tubular upper - lower control arms(your top cross $630 shafts) Engine trans. Mount $200 Front sway bar $200 Front GM calp. Mounts $115 Brake pedal $200 Rear leaf springs - hardware $575 Rear 4 bar set (Coil-overs extra) $515 Triangulated 4 bar set $460 THANK YOU FOR YOUR BUSINESS! Subtotal Tax Rate Tax Freight Total Due 17

22 NEW!! AIR SUSPENSION BY AIR LIFT NEW!! AIR SPRING - BELLOWS Part Number Max Inflated Diameter Min Inflated Diameter Max Extended Height Installed Height Range Type Air Fitting Size Load@100ps i (Design Height) Price A ¼ 2500 $ C ¼ 4360 $ C ¼ 6670 $ C ¼ 7055 $ B N/A* 2025 $ (58338) B N/A* 2270 $ (58335) (58305) A N/A* 2210 $ * AIR FITTING NOT REQUIRED - AIR CARTRIDGE MOLDED IN TOP PLATE FOR ¼ AIR LINE. 18

23 AIR SPRINGS - SLEEVES Part Number Max Inflated Diameter Min Inflated Diameter Max Extended Height Installed Height Range Type Air Fitting Size Load@100 psi (Design Height) Price FLAT TOP 1/ $ B 1/ $ B 1/ $ B 1/ $ A 1/8 880 $ C 1/8 880 $ A 1/8 900 $ B 1/8 900 $ A 1/8 890 $

24 ACCESSORIES FOR AIR RIDE SYSTEMS 20

25 PRODUCTS BY EMS AUTOMOTIVE PRODUCTS EMS SMOOTHDASH EMS SMOOTHDASH A totally new and exciting product line from EMS Automotive is their EMS Smoothdash Series of products. The EMS Smoothdash is a die stamped 18 gauge steel dashboard made especially for street rodders. The EMS Smoothdash is a fantastic way to achieve a cool street rod look. All EMS Smoothdash s are based upon original factory dash surface geometry. EMS Automotive has completely filled and shaped the original openings to provide the EMS Smoothdash with a super clean surface to make a street rod or resto rod dash. The EMS Smoothdash also eliminates the need for billet aluminum pieces that clutter an otherwise cool dash Ford: P/N: 48 Fits all closed car and open car except roadster Ford Style: P/N: Available late 1998 Inquire Fits all Ford closed car Ford open car Inquire for the latest info. May fit closed cars with some modification Inquire for the latest info. The EMS Smoothdash s 100% steel construction allows for easy gauge installation without annoying and expensive gauge grounding kits that would be required for a fiberglass dash. Also the sturdy steel construction provides a great mounting for the steering column. Do the dash right Do it in steel 1937 Ford Style: P/N: 41 Fits all Ford closed cars. May fit open cars with slight modification. May fit all 1940 closed cars with slight modification Inquire for the latest info Ford: P/N: 64 Fits all Ford closed or open cars. EMS TAILPANS for Chevrolet Cars All Chevrolet EMS Tailpans are fully-detailed, high-quality, die-stamped, 18 gauge rust-resistant steel and come with complete weather-strip channels. Bumper slots are removed on EMS Tailpans to allow for maximum customer flexibility. EMS Tailpans : Don t shortcut or patch your project use quality EMS components for the finest in fit and finish! Most Tailpans...$ SEE APPLICATIONS ON NEXT PAGE ---

26 N/A Panel #50 N/A P/N: 50 Panel #49 N/A See Note E Panel #50 Panel #50 See Note E See Note E Panel #49 Panel #49 See Note E Panel #11 Panel #12 Panel #12 Panel #17 Panel #13 Panel #14 Panel #12 Panel #15 Panel #16 Panel #16 Panel #39 Panel #39 Panel #39 Panel # Chevrolet Coupe Standard 107 WB Coupe Master Deluxe 113 WB Coach Sedan Standard 107 WB w/o trunk Coach Sedan Master Deluxe 113 WB w/o trunk Sedan Master Deluxe 113 WB with trunk Sedan Standard 107 WB w/o trunk Sedan Delivery Standard Series 1936 Chevrolet Coupe Standard 109 WB Coupe Master Deluxe 113 WB Coach Sedan Standard 109 WB w/o trunk Coach Sedan Master Deluxe 113 WB w/o trunk Sedan Standard 109 WB with trunk Sedan Master Deluxe 113 WB with trunk Sedan Delivery Chevrolet Coupe Master, Master Deluxe Sedan Master, Master Deluxe Sedan Delivery see Notes G & L Trunk floor extension panel Sedan & Coupe see Note H 1939 Chevrolet Coupe Master, Master Deluxe Sedan Master, Master Deluxe Sedan Delivery see Note G 1940 Chevrolet Coupe Master, Master Deluxe Sedan Master, Master Deluxe Sedan Delivery see Note K Chevrolet Aeroback 2Dr Sedan see Note M Coupe and Convertible see Note M 2 Dr and 4 Dr Sedan see Note M Sedan Delivery see Note M & K Chevrolet rocker panels, ¼ panel sections, and cowl sections are also available. Die-formed with the correct factory curves to fit Call for details! GM cars using panel #39. This is a full hot rod style smoothie rear EMS Tailpan which has the look of a roll pan for that great No- Bumper look. Die-stamped from 18 gauge steel, this EMS Tailpan extends from the bottom of the rear fenders to 1 inch above the tail lights (Chevrolet) and has full weather-strip channel and fender flanges. The raised sections for stock tail lights have been removed for your convenience. To use with stock tail lights, trim 3 inches from the top of the panel. We ve removed the bumper bracket slots so these panels can be used with stock or custom bumpers (with the gravel guard removed) for the traditional Resto-Rod look.

27 Chevrolet Sheet Metal Repair Sections Lower Front Cowl Finely detailed, die-stamped 18- gauge steel panels repair the lower front cowl where the front fender bolts to the main body shell. Extends from the firewall into the front door jamb and from the bottom of the rocker line upward 12 to 14 inches depending on application....$ Chevrolet Lower Front Cowl Repair Sections Not Available 1935 Standard not currently available Panel # Master/1936 ALL models Panel # /1938 ALL models Panel # ALL models Panel # ALL models & Olds 60 /Pontiac Special series Panel # ALL models Future Development ALL models (to be developed) Chevrolet Rocker Panels Not Available 1935 Standard not currently available Rocker Panel Panel # Master/1936 ALL models Well-made, one-piece, diestamped 18-gauge steel panels Panel # /1938/1939 COUPE models Panel # /1938/1939 2dr SEDAN models which precisely duplicate the Panel # coupe/sedan & Olds 60 /Pontiac Special factory curves and shapes. Fit series door curves accurately. Panels Inquire ALL models extend completely from hinge Future Development ALL models (to be developed) pillar to door post. May fit some SEDAN DELIVERY: Call EMS for specific applications Buick, Olds and Pontiac models.$ Rear Quarter Sections Chevrolet Rear Quarter Lower Repair Section Not Available 1935 Standard not currently available Accurate to every detail, these die-stamped 18-gauge steel Panel # Master 2dr sdn/1936 2dr sedan panels duplicate the factory Inquire 1935 Master coupe/1936 coupe features. Each panel extends Panel # /1938/1939 COUPE models from the door post to the rear Panel # /1938/1939 2dr SEDAN models wheel opening. May fit some Panel # coupe/sedan & Olds 60 /Pontiac Special Buick, Olds and Pontiac models.$ series Inquire ALL models Future Development ALL models (to be developed) SEDAN DELIVERY: Call EMS for specific applications

28 Panel #1 Panel #2 Panel #4 Panel #5 Panel #6 Panel #7 Panel #4 Panel #30 Panel #7 Panel #31 Panel #30 Panel #7 Panel #59 Panel #31 Panel #30 Panel #7 Panel #59 Panel #9 Panel #8 Panel #9 Inquire Panel #8 Inquire Panel #10 EMS Tailpans for Ford Cars Ford Humpback Standard & Deluxe Flatback Standard & Deluxe 1937 Ford Humpback Standard & Deluxe 2 & 4 Dr Sedans, Convertible Sedans and Touring Pheatons Flatback Standard & Deluxe 2 & 4 Dr Sedans Coupe, Roadster, Club Coupe, Cabriolet Tool box compartment All body styles 1938 Ford Humpback Standard, 2&4Dr Sedans 38½ wide Deluxe Sedan 2 & 4 Dr Tool box compartment Std. Sedans & All Coupes 1939 Ford Coupe Standard & Deluxe Sedan 2 & 4 Dr Standard & Deluxe Tool box compartment Sedan see Note C Tool box compartment Coupe 1940 Ford Coupe Standard & Deluxe Sedan 2 & 4 Dr Standard & Deluxe Tool box compartment Sedan see Note C Tool box compartment Coupe Ford & Mercury Tool box compartment STD & DLX Coupe/Sedan Ford & Mercury All body styles (except Wagon) Tall Roll Pan see Notes A & B Tool box compartment All body styles (except Wagon) All body styles Short Roll Pan see Notes A & B 1948 Ford & Mercury All body styles (except Wagon) Tall Roll Pan see Notes A & B All body styles (except Wagon) Short Roll Pan see Notes A & B Ford All body styles ( except Wagon) Hot Rodders take note: EMS Tailpan #8 is 9 high and will replace the stock 4 pan to create a great Smoothie Roll Pan look!! Can be used with or without bumpers. Ford EMS Tailpans repair the most commonly damaged area the under deck lid panel and tool box. Panels are die-formed, rust-resistant steel and are fully detailed including weather-strip channels. Made in the USA from steel at least as thick as the original (varies by application). Tool box compartment fits directly behind the outer under deck panel and connects the outer panel with the trunk floor. Includes complete bottom flange. All EMS Tailpans are Made in the USA! INSTALLATION NOTES: Note A: Hot Rodders take note EMS Tailpan #38 is 9 high and will replace the stock 4 pan to create a great Smoothie Roll Pan look!!! Note B: The tool box compartment was eliminated in mid-1946 (depending on body style and assembly plant). The outer panel remained the same. Note C: 1938 Deluxe Sedan, 1939, 1940 Sedan Slight modification is needed for proper fit-up. RETAIL PRICES Panel #1 Panel #2 Panel #3 Panel #4 Panel #5 Panel #6 Panel #7 Panel #8 Panel #10 Panel #30 Panel #31 SHIPPING: UPS AT COST $ $ $ $ $ $ $ $ $ $ $340.00

29 CALL FOR SPECIAL PRICING

30 DRIVE SHAFT ORDER FORM MEASURE FOR U-JOINT SIZE AT THIRD MEMBER YOKE E=3-7/32 E=3-5/8 E=3-5/8 E=3-5/8 E=4-3/16 E=4-3/16 E=4-31/32 D=1-1/16 D=1-1/16 D=1-1/8 D=1-3/16 D=1-3/16 D=1-3/8 D=1-3/8 SOME CHRYSLER CORP. A=2-1/8 A=2-5/8 SOME GENERAL MOTORS A=2-9/16 THESE DIMENSIONS MUST BE ACCURATE. IF YOU DON T GET THEM, CHECK FOR WEAR AT E OR A You must supply your own slip joint with this order. Exact measurements are a must. We will build to your measurements so if you are wrong it is Your problem. If we make a mistake, we will make good and remake. ONE PIECE SHAFT* TRANSMISSION MAKE & MODEL DIFFERENTIAL MAKE & MODEL PUSH SLIP JOINT ALL THE WAY ON TO THE OUTPUT SHAFT. THEN PULL OUT TO A MAXIMUM DISTANCE OF 1 INCH. MEASURE FROM THE CENTRE OF THE HOLE IN THE SLIP JOINT TO THE CENTERLINE OF U-JOINT OF THE THIRD MEMBER. THIS WILL BE THE FLAT SURFACE WHERE THE U-BOLT HOLE IS DRILLED. * MAXIMUM ALLOWABLE LENGTH IS VARIABLE. A TWO PIECE SHAFT SYSTEM MAY BE NECESSARY. Please build driveshaft(s) as indicated above. My order should include all items checked on reverse. Ship via UPS Ground SHIP TO: (via UPS at cost) Note: Shipping Address must be a physical location NOT a P.O. Box Name Phone No.( ) Address City Province Postal Code METHOD OF PAYMENT MY CHECK IS ENCLOSED X Signature