isovac A The perfect solution for direct application
|
|
- Magdalen Jones
- 5 years ago
- Views:
Transcription
1 Data sheet isovac A page 1/7 01/2018 Electrical Steel Fully processed Data sheet isovac A page 1/7 01/2018 isovac A The perfect solution for direct application Manufactured in the most modern production lines, this fully processed isovac grade exhibits highly homogeneous properties across the width and length of the entire strip. The result is excellent and consistent processability in the manufacture of highly efficient electrical components. Upon request, isovac A can be supplied with an electrical steel insulation system and can be used directly in as-delivered condition. Convincing advantages:»» Best processability through consistent mechanical properties and homogeneous, clean surfaces»» Excellent stackability resulting from high dimensional accuracy in rolling direction and perpendicular to rolling direction (thickness tolerance)»» Innovative electrical steel insulation systems upon request voestalpine Steel Division
2 Data sheet isovac A page 2/7 01/2018 voestalpine supplies isovac A, an electrical steel of the highest quality. We offer you a customer-focused overall package of products, service and logistics in addition to all the advantages of our integrated metallurgical facility and Steel Service Centers. according to conventional international standards: DIN EN Material No. Abbreviation IEC IS C2552 GOST ASTM A677 AISI IS648 GB/T isovac A M270-50A M270-50A 5 50A F155 M-15 50C270 50W270 Mechanical properties: Tensile test according to DIN EN ISO and hardness according to DIN EN ISO (Typical values); Test direction: Transverse Yield strength R e [MPa] 0.2 %-Yield strength R p0.2 [MPa] Tensile strength R m [MPa] Elongation A 80 [%] isovac A ardness V5 Magnetic properties: in as-delivered condition (Typical values) Test direction: Mean value from longitudinal and transverse measurements at (60 z), single-sheet test 1.0 T P10 Specific total loss Magnetic polarization Relative permeability 60 z [W/lb] 1.5 T P A/m A/m A/m T µ r 60 z [W/lb] [T] [T] [T] isovac A Physical properties: Typical values Density ρ [g/cm 3 ] Specific electrical resistance ρ s [μωcm] Thermal conductivity λ [W/mK] isovac A
3 Data sheet isovac A page 3/7 01/2018 Characteristics P s / loss curve and characteristics / magnetization curve Test direction: Mean value from longitudinal and transverse measurements at indicated frequencies, single-sheet test P S z 200 z 400 z 500 z 600 z 700 z 800 z 1000 z Characteristics μ r / permeability curve Test direction: Mean value from longitudinal and transverse measurements at, single-sheet test µ r
4 Data sheet isovac A page 4/7 01/2018 Frequency dependence of magnetic properties Test direction: Mean value longitudinal and transverse at indicated frequencies and polarizations, single-sheet test 60 z 200 z
5 Data sheet isovac A page 5/7 01/2018 Frequency dependence of magnetic properties Test direction: Mean value longitudinal and transverse at indicated frequencies and polarizations, single-sheet test 400 z 500 z 600 z
6 Data sheet isovac A page 6/7 01/2018 Frequency dependence of magnetic properties Test direction: Mean value longitudinal and transverse at indicated frequencies and polarizations, single-sheet test 700 z 800 z 1000 z
7 Data sheet isovac A page 7/7 01/2018 Available Dimensions Delivery form Width [mm] isovac A Length [mm] Wide strip / Slit strip Cut-to-length sheets Deliverable coating systems Uncoated C-3 Backlack C-5 C-6 isovac A Available On request The information and product properties contained in this printed material are non-binding and serve the sole purpose of technical orientation. They do not replace individual advisory services provided by our sales and customer service teams. The product information and characteristics set forth herein shall not be considered as guaranteed properties unless explicitly stipulated in a separate contractual agreement. For this reason, voestalpine shall not grant any warranty nor be held liable for properties and/or specifications other than those subject to explicit agreement. This also applies to the suitability and applicability of products for certain applications as well as to the further processing of materials into final products. All application risks and suitability risks shall be borne by the customer. The General Terms of Sale for Goods and Services of the voestalpine Steel Division shall apply to all materials supplied by the voestalpine Steel Division and can be accessed using the following link: Technical changes are reserved. Errors and misprints are excepted. No part of this publication may be reprinted without explicit written permission by voestalpine Stahl Gmb. Please find further information and downloadable files at voestalpine Stahl Gmb voestalpine-straße Linz, Austria T. +43/50304/ produktmanagement@voestalpine.com
isovac A The perfect solution for direct application
Data sheet isovac 250-35 A page 1/7 01/2018 Electrical Steel Fully processed Data sheet isovac 250-35 A page 1/7 01/2018 isovac 250-35 A The perfect solution for direct application Manufactured in the
More informationisovac A The perfect solution for direct application
Data sheet isovac 330-50 A page 1/7 01/2018 Electrical Steel Fully processed Data sheet isovac 330-50 A page 1/7 01/2018 isovac 330-50 A The perfect solution for direct application Manufactured in the
More informationisovac A HC The specialist with high thermal conductivity
Data sheet isovac 400-65 A C page 1/6 01/2018 Electrical Steel Fully processed Data sheet isovac 400-65 A C page 1/6 01/2018 isovac 400-65 A C The specialist with high thermal conductivity Manufactured
More informationisovac A HC The specialist with high thermal conductivity
Data sheet isovac 330-50 A C page 1/7 01/2018 Electrical Steel Fully processed Data sheet isovac 330-50 A C page 1/7 01/2018 isovac 330-50 A C The specialist with high thermal conductivity Manufactured
More informationisovac high-perm A
Data sheet isovac P 400-65 A page 1/6 01/2018 Electrical Steel Fully processed Data sheet isovac P 400-65 A page 1/6 01/2018 isovac high-perm 400-65 A The specialist with the highest permeability Manufactured
More informationisovac A HF The specialist for high frequencies
Data sheet isovac 330-35 A F page 1/7 01/2018 Electrical Steel Fully processed Data sheet isovac 330-35 A F page 1/7 01/2018 isovac 330-35 A F The specialist for high frequencies Manufactured in the most
More informationisovac K HE The specialist for shorter final annealing times
Data sheet isovac 450-50 K E page 1/7 01/2018 Electrical Steel Semi-processed Data sheet isovac 450-50 K E page 1/7 01/2018 isovac 450-50 K E The specialist for shorter final annealing times Production
More informationisovac A Electrical steel Data sheet February 2015 The specialist in direct application Convincing advantages
Electrical steel isovac 470-65 A Data sheet February 2015 The specialist in direct application isovac is the electrical steel made by voestalpine and stands for highest energy efficiency. With its excellent
More informationisovac high-perm NO30-15
Electrical steel isovac high-perm NO30-15 Data sheet April 2016 The specialist for the automotive industry isovac is the electrical steel made by voestalpine and stands for highest energy efficiency. With
More informationisovac high-perm A
Electrical steel isovac high-perm 310-50 A Data sheet February 2015 The specialist with the highest permeability isovac is the electrical steel made by voestalpine and stands for highest energy efficiency.
More informationisovac K Electrical steel Data sheet December 2014 The specialist in individual final annealing processes Convincing advantages
Electrical steel isovac 800-65 K Data sheet December 2014 The specialist in individual final annealing processes isovac is the electrical steel made by voestalpine and stands for highest energy efficiency.
More informationHOT-DIP GALVANIZED STEEL STRIP
HOTDIP GALVANIZED STEEL STRIP Range of supply April 2018 voestalpine Steel Division Steel grade Mild steels A 80 A 80 r 90 n 1020/Ag E DX51D Trans. 270 500 22 DX52D Trans. 140 300 270 420 26 DX53D Trans.
More informationMATERIAL DATA SHEET* ALPANA d.o.o.
MATERIAL DATA SHEET* ALPANA d.o.o. Contents H-Pur Material Data Sheet... 2 LT-Pur Material Data Sheet... 3 S-Pur Material Data Sheet... 4 XH-Pur Material Data Sheet... 5 XSH-Pur Material Data Sheet...
More informationMaterial NBR NB black
page 1 / 5 Physical properties nominal range typical values Density ASTM D 1817, 23 C Hardness ASTM D 2240, Shore A, 23 C Tensile strength ASTM D 412, 23 C Elongation at Break ASTM D 412, 23 C ASTM D 395,
More informationStainless Spring Steel Strip
Stainless Spring Steel Strip Tolerances according to DIN EN ISO 9445-2:2010-06 Chart 1 (fine tolerance) or as agreed Grade No.* Grade Name Standard Tensile Strength (Rm) Comparable 1.4301 X 5 CrNi 18-10
More informationCR10-07 A-FJ-A-E-HQQE 3x400D 50 HZ
GRUNDFOS DATA BOOKLET CR1-7 A-FJ-A-E-HQQE 3x4D 5 HZ Grundfos Pump 9651216 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crfam/9651216/cr-1-7-a-fj-a-e-hqqe.html
More informationCompany name: BKB Building Solutions Created by: Michael Chlopek Phone: Date: 14/03/2017
Position Qty. Description 1 CR 32-3-2 A-F-A-E-HQQE Phone: 8 61 Date: 1/3/217 Product No.: 961221 Note! Product picture may differ from actual product Liquid: Pumped liquid: Water Liquid temperature range:
More informationCompany name: GRUNDFOS (Singapore) Pte. Ltd. Created by: Angie Ang Phone: Date: 23/03/2017
Position Qty. Description 1 CR 15-7 A-F-A-E-HQQE Date: 3/3/17 Product No.: On request Note! Product picture may differ from actual product Liquid: Pumped liquid: Water Liquid temperature range: -.. 1 C
More informationHigh adaptability and tightness even at low surface loads
KLINGER top-chem 03 High adaptability and tightness even at low surface loads KLINGER top-chem 03 PTFE filled with hollowglassmicrospheres. Excellent chemical resistance in strongly acidic and alkaline
More informationHigh adaptability and tightness even at low
High adaptability and tightness even at low surface loads KLINGER top-chem 03 PTFE filled with hollowglassmicrospheres. Excellent chemical resistance in strongly acidic and alkaline applications and excellent
More informationDELO -PUR 9692 Multi-purpose 2c polyurethane, cures at room temperature, high-viscous, filled
DELO -PUR 9692 Multi-purpose 2c polyurethane, cures at room temperature, high-viscous, filled Base - polyurethane - two-component Use - for the bonding of metal, plastic and sometimes even elastomers -
More informationTECHNYL A 218 BLACK 21N
TECHNYL A 218 BLACK 21N Description TECHNYL A 218 Black 21 N is an unreinforced polyamide 66, standard viscosity, heat stabilized for injection moulding.it is available in black color. Key Properties Chemical
More informationSQ kW V 50/60Hz 10m
GRUNDFOS DATA BOOKLET SQ 2-55.7kW -24V 5/6Hz m Grundfos Pump 965244 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/sqc2/965244/sq-2-55.html
More informationFluid Sealing Association
Fluid Sealing Association STANDARD FSA-DSJ-401-09 SPECIFICATION FOR HIGH TEMPERATURE AND ACID RESISTANT TERPOLYMER FLUOROELASTOMER REVISED OCTOBER, 2009 994 Old Eagle School Road, Suite 1019 Wayne, Pennsylvania
More informationMATERIAL DATA SHEET TECHLITE LIGHT GREY ACOUSTICAL FOAM
TECHLITE Light Grey Acoustical Foam is a light-grey, open-cell foam made of melamine resin. TECHLITE is manufactured in the form of untrimmed blocks with a thin outer skin. The standard dimensions of the
More informationDELO-DUOPOX AD897 Multi-purpose 2c epoxy resin, cures at room temperature, high-viscous, filled
DELO-DUOPOX AD897 Multi-purpose 2c epoxy resin, cures at room temperature, high-viscous, filled Base - epoxy resin - two-component Use - for the trowelling of welded seams - pasty and run-resistant but
More informationLow friction, low wear: The Fast and Slow Motion Specialist iglidur J
Low friction, low wear: The Fast and Slow Motion Specialist iglidur Over 250 sizes available from stock Low wear against different shaft materials Low coefficients of friction running dry Vibration dampening
More informationiglidur J The Fast and Slow Motion Specialist
iglidur The Fast and Slow Motion Specialist Used in long-life applications, also with soft shafts. The iglidur plain bearings are designed for the lowest coefficients of friction while running dry and
More informationA High tech Fibre Material ideal for strong alkali media and steam
KLINGERSIL C- A High tech Fibre Material ideal for strong alkali media and steam KLINGERSIL C- Carbon fibres and special heat resistant additives bonded with NBR. A superior performance product designed
More informationArcelorMittal Europe - Long products Sections and Merchant Bars HISTAR. Innovative high strength steels for economical steel structures
ArcelorMittal Europe - Long products Sections and Merchant Bars HISTAR Innovative high strength steels for economical steel structures Shanghai World Finance Center, P.R. China Innovative high strength
More informationTender Text. Company name: Created by: Phone: Date: 3/13/2017. Product No.: CRE 5-20 AN-FGJ-A-E-HQQE
Tender Text Product No.: 9685315 CRE 5-2 AN-FGJ-A-E-HQQE Product photo could vary from the actual product Liquid: Pumped liquid: Water Liquid temperature range: -2.. 12 C Liquid temperature during operation:
More informationDELO-DUOPOX AD895 Multi-purpose 2c epoxy resin, cures at room temperature, medium-viscous, filled
DELO-DUOPOX AD895 Multi-purpose 2c epoxy resin, cures at room temperature, medium-viscous, filled Base - epoxy resin - two-component Use - high-strength construction adhesive - multi-purpose - the cured
More informationCompany name: Created by: Phone:
Qty. Description 1 CRE 1-5 A-FJ-A-E-HQQE Date: /3/17 Product No.: On request Note! Product picture may differ from actual product The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor
More informationQCB Thermoplastic Bearing Units
QCB Thermoplastic Bearing Units CAT TP 2017 E Ver1 NBC Group Ltd In the interest of continuing improvement, NBC Group Ltd reserves the right to modify any product or specification without prior notice.
More informationFluid Sealing Association
Fluid Sealing Association STANDARD FSA-DSJ-401-07 SPECIFICATION FOR HIGH TEMPERATURE AND ACID RESISTANT TERPOLYMER FLUOROELASTOMER REVISED JULY, 2007 This is an editorial revision only. The standard currently
More informationCRN15-09 A-P-G-V-HQQV 3x400/ HZ
GRUNDFOS DATA BOOKLET CRN15-9 A-P-G-V-HQQV 3x/69 5 HZ Grundfos Pump 9652 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crn15/9652/crn-15-9-a-p-g-v-hqqv.html
More informationCRK 2-60/6 AWA-BUBV 075KW 3X400V 50HZ
GRUNDFOS DATA BOOKLET CRK 2-6/6 AWA-BUBV 75KW 3X4V 5HZ Grundfos Pump 49716 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crk2/49716/crk-2-6-6-a-w-a-auuv.html
More informationiglidur G The General Purpose Bearing: most popular iglidur material worldwide
Standards Wide Range from Stock polymer bearings G The General Purpose Bearing: most popular material worldwide from page 51 J The Fast and Slow Motion Specialist: used in long-life applications, also
More informationCrastin PBT Thermoplastic polyester resins
Crastin PBT Thermoplastic polyester resins Product guide and properties Start with DuPont Engineering Polymers DuPont s registered trademark Crastin PBT Thermoplastic polyester resins Introduction CRASTIN
More informationPolyamide 6 for Injection Moulding
Polyamide 6 for Injection Moulding Promyde is a trademark of NUREL 1 NUREL Engineering Polymers Excellence in Polymerization Recent technical advancements in NUREL polymerization processes have enabled
More informationCRN15-12 A-P-G-E-HQQE 3x400/ HZ
GRUNDFOS DATA BOOKLET CRN15-12 A-P-G-E-HQQE 3x/69 5 HZ Grundfos Pump 9651956 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crn15/9651956/crn-15-12-a-p-g-e-hqqe.html
More informationCRI10-14 A-FGJ-I-E-HQQE 3x400D 50 HZ
GRUNDFOS DATA BOOKLET CRI1-1 A-FGJ-I-E-HQQE 3xD 5 HZ Grundfos Pump 96512 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cri1/96512/cri-1-1-a-fgj-i-e-hqqe.html
More informationKLINGERSIL C High stress capability due to metal mesh reinforcement. C-4438 KLINGERSIL
KLINGERSIL C-44 metal mesh reinforcement KLINGERSIL C-44 Synthetic fibres and glass fibres, bonded with NBR. metal mesh. Resistant to oils, hydrocarbons, water and steam. A universal material with outstanding
More informationh Technical Product Data CC Pressure Pipe Systems
h Technical Product Data CC Pressure Pipe Systems Amiblu Holding GmbH All rights reserved. Publication: 09/2018 This version replaces all previous versions. For all current data please visit our website
More informationDryLin R Linear Plain Bearings, Fast and Quiet
+90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant
More information3 TM Cold Applied Barrier Boot System
M Technical Information : Barrier Boot TM Cold Applied Barrier Boot System For rated voltages 6.5/11(12) kv and 8.7/15(17.5) kv 92-EE 717-1 Product Description The Cold Applied Barrier Boot System consist
More informationHigh Power Line. Direct-Acting Solenoids Reversible Solenoids
High Power Line Direct-Acting Solenoids Reversible Solenoids High Performance Line Kendrion N.V. is one of the leading manufacturers of solenoids and electromagnetic components worldwide. Divided into
More informationDryLin R Linear Plain Bearings, Fast and Quiet
+90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant
More informationHIGH STRENGTH, ECONOMICAL AND EXCELLENT QUALITY STEEL PIPE PILES DELIVERED TO YOUR EXPECTATIONS
ESC STEEL PIPE PILES LSAW, SSAW & ERW PIPES HIGH STRENGTH, ECONOMICAL AND EXCELLENT QUALITY STEEL PIPE PILES DELIVERED TO YOUR EXPECTATIONS Pipe Piles can be utilised in a multitude of applications: such
More informationMTB /183 A-F-A-BQQV 400D-2 11kW
GRUNDFOS DATA BOOKLET MTB 65-2/13 A-F-A-BQQV D-2 11kW Grundfos Pump 965751 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/mtb/965751/mtb-65-2-13-a-f-a-bqqv.html
More informationElectronic Enclosures Technical Information 445/441 Panel Instrument Cases Acc. to DIN 43700/IEC 61554
Electronic Enclosures Technical Information 3. Switching and Control Panel (Switchboard) Instrument Cut Outs 2,5 t 3,2 Type l Permitted tolerance l2 Permitted tolerance X M 2 Specification for a switchboard
More informationDryLin R Linear Plain Bearings, Fast and Quiet
+90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant
More informationDryLin R Linear Plain Bearings, Fast and Quiet
+90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant
More informationiglidur G The General Purpose Bearing
iglidur The eneral Purpose Bearing Most popular iglidur material worldwide. iglidur bearings cover an extremely wide range of different requirements they are truly all round. Typical applications cover
More informationVISCOBASE Synthetic Base Fluids ECONOMICAL SOLUTIONS FOR HIGH-PERFORMANCE AUTOMOTIVE AND INDUSTRIAL GEAR OILS
VISCOBASE Synthetic Base Fluids ECONOMICAL SOLUTIONS FOR HIGH-PERFORMANCE AUTOMOTIVE AND INDUSTRIAL GEAR OILS HIGH-PERFORMANCE BASE FLUIDS AND LUBRICANT ADDITIVES The Oil Additives specialists at Evonik
More informationPolyamide 6 & 66 for Injection Moulding
Polyamide 6 & 66 for Injection Moulding Promyde is a trademark of NUREL 1 NUREL Engineering Polymers Polymerization Integrated into In-House Compounding 50 years experience in polymerization processes
More informationReinforcing steel bars
Reinforcing steel bars 6 The Company produces the reinforcing rolled steel according to the international and national standards: DSTU 3760:2006 (Ukraine) GOST 5781-82 (international standard) GOST 10884-94
More informationSQ kW V 50/60Hz 70M
GRUNDFOS DATA BOOKLET SQ 1-14 1.68kW 2-24V 5/6Hz 7M Grundfos pump 96524442 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/sqc1/96524442/sq-1-14.html
More informationDIMENSIONAL AND SHAPE TOLERANCES
DIMENSIONAL AND SHAPE TOLERANCES COLD ROLLED STEEL SHEETS AND COILS The tolerances for SSAB s cold rolled sheet steel products comply with EN 10131:2006. Narrower or customer specific tolerances are available
More informationLow wear on all shafts: The Marathon Runner iglidur W300
iglidur Low wear on all shafts: The Marathon Runner iglidur Over 400 sizes available from stock For especially long service life Low coefficient of friction Extremely high wear resistance Also suitable
More informationCompany name: Čerpadla NEPTUN Created by: Václav König Phone: Date:
Position Qty. Description 1 SQ 2-55 Note! Product picture may differ from actual product Product No.: 9651199 3" multi-stage, submersible pump designed for domestic water supply, liquid transfer in tanks,
More informationCRN1S-21 A-FGJ-G-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CRN1S-21 A-FGJ-G-E-HQQE 3x23/4 5HZ Grundfos Pump 96515918 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crn1s/96515918/crn-1s-21-a-fgj-g-e-hqqe.html
More informationGRP backing flanges DIN 2501 Flange connecting dimension PN10 WORK STANDARD. GRP backing flanges made of Polyester resin.
GRP backing flanges DIN 2501 Flange connecting dimension PN10 1310-WN-en 06 10.2002 GRP backing flanges made of Polyester resin. D 45 e d2 d1 b1 k Flange connecting dimensions according to DIN 2501 Part
More informationnovatec PREMIUM XP The new generation of fibre-reinforced graphite gaskets.
novatec PREMIUM XP The new generation of fibre-reinforced graphite gaskets. GASKETS TECHNICAL TEXTILES EXPANSION JOINTS INSULATION NEW MATERIALS Application recommendations depending on the pressure and
More informationSQ kW V 50/60Hz
GRUNDFOS DATA BOOKLET SQ 5-7 1.85kW 2-24V 5/6Hz Grundfos pump 9651217 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/sqc5/9651217/sq-5-7.html
More informationSeamless. Oil Country Tubular Goods (OCTG)
Seamless Oil Country Tubular Goods (OCTG) About Us ArcelorMittal Tubular Products Europe has two seamless mills serving the Oil Country Tubular Goods (OCTG) market. ArcelorMittal Tubular Products Ostrava
More informationCompany name: Created by: Phone:
Position Qty. Description 1 TP 8-/2 A-F-A-BQQE Date: 29/1/18 Product No.: 9618724 Single-stage, close-coupled, volute pump with in-line suction and discharge ports of identical diameter. The pump is of
More information3.1 Available sections, terms of delivery
3.1 Interlocks LARSSEN section Interlock design conforming to DIN EN 10248-2 and E 67 of EAU 2004 LARSSEN 43, 430 HOESCH section (LARSSEN interlock) Interlock design conforming to DIN EN 10248-2 and E
More informationnovapress 850 Extreme adaptability. High fault tolerance. Maximum sealing performance.
novapress 850 Extreme adaptability. High fault tolerance. Maximum sealing performance. GASKETS TECHNICAL TEXTILES EXPANSION JOINTS INSULATION NEW MATERIALS A quantum leap in tightness Maximum sealing performance
More informationSurface Protective Systems
Surface Protective Systems Technical information Oxydur VEL-SR Mechanical applied electrically conductive laminate system Base Vinyl ester resin Material Group Membranes Tank- / vessel linings - laminates
More informationCompany name: Created by: Phone:
Position Qty. Description 1 TP -42/2 A-F-A-BQQE Date: 26/1/218 Product No.: 9874287 Single-stage, close-coupled, volute pump with in-line suction and discharge ports of identical diameter. The pump is
More informationDRVRMDMOTL Motorized Linear Drive. DRVMDMOTLR Motorized Linear and Rotary Drive. Instruction Manual
DRVRMDMOTL Motorized Linear Drive DRVMDMOTLR Motorized Linear and Rotary Drive Instruction Manual Version 1.1 07 November 2016 Thurgauerstr. 72, CH-8050 Zürich, Switzerland TEL. +41 44 273 16 38, FAX.
More informationEUROPLEX SDX EUROPLEX SDX-F. Danger averted! Static dissipative ESD glazing made of polycarbonate
Danger averted! Static dissipative ESD glazing made of polycarbonate An investment in the safety of your production processes. EUROPLEX SDX EUROPLEX SDX-F 1/6 EUROPLEX SDX and EUROPLEX SDX-F Static Dissipative
More informationNeopolen P 9230 ESD. Bulk density 1) Average Average Color 2) particle size particle weight [ kg/m 3 ] [ mm ] [ mg ]
= registered trademark of BASF SE Neopolen P 9230 ESD Product Description Neopolen P 9230 ESD is expanded Polypropylene supplied in the form of beads. The cells are largely closed. Table 1: Bulk density
More informationCABELEC Conductive Compounds Product Selection Guide
Conductive Compounds CABELEC Conductive Compounds Product Selection Guide CABELEC Conductive Compounds Product SELECTION Guide Cabot s Performance Materials: Over 130 Years of Getting You Where You Want
More informationPRODUCT INFORMATION. Single-stage magnetically coupled pumps according to EN 22858; ISO 2858; ISO Model series MCN
PRODUCT INFORMATION Single-stage magnetically coupled pumps according to EN 88; ISO 88; ISO 199 Model series MCN Contents Description Description... Application and insertion... Materials... Functional
More informationAPEX DYNAMICS. Installation Instruction for Rack and Pinion
APEX DYNAMICS Installation Instruction for Rack and Pinion Overview Why it is so important? Installation of rack onto the machine 1. Installation and Connetction of racks 2. Installation of pinion onto
More informationAnalog Durometer Model AD-100
CHECK LINE BY ELECTROMATIC Analog Durometer Model AD-100 Operating Instructions Table of Contents 1.0 Introduction... 2 1.1 Unpacking 1.2 Complete Kit 2.0 Testing Procedure... 3 3.0 Memory Pointer... 4
More information5540/9000 UV Resistant Varnish Gloss. Mix Ratio (by volume) 5540/9000 (Base Component) 0701/9000 (Activator)
TECHNICAL DATA SHEET Product Description is a two component UV resistant acrylic-urethane gloss coating designed for use as a protective varnish for aircraft components. Protective varnish for external
More informationRAUFUSION PP-R PLUMBING SYSTEM. Safer. Smarter. More Convenient
RAUFUSION PP-R PLUMBING SYSTEM Safer. Smarter. More Convenient SAFER Engineered for your safety and well being Safety is critical when choosing a suitable plumbing system. REHAU RAUFUSION consists of a
More informationHigher Temperature PP-Based Composite Provides Nylon/PA- Level Performance at Lower Weight and Economic Feasibility
Higher Temperature PP-Based Composite Provides Nylon/PA- Level Performance at Lower Weight and Economic Feasibility Society of Plastic Engineers Automotive Composites Conference & Exhibition September
More informationCRT 16-4 A-P-A-E-AUUE 4kW 3x400D 50Hz
GRUNDFOS DATA BOOKLET CRT 16-4 A-P-A-E-AUUE 4kW 3x4D 5Hz Grundfos Pump 96117246 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crt16/96117246/crt-16-4-a-p-a-e-auue.html
More informationSFI SPECIFICATION 1.1 EFFECTIVE: NOVEMBER 9, 2001 *
SFI SPECIFICATION 1.1 EFFECTIVE: NOVEMBER 9, 2001 * PRODUCT: Replacement Flywheels and Clutch Assemblies 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and minimum
More informationCRT 8-20 A-P-A-E-AUUE 11kW 3x400D 50Hz
GRUNDFOS DATA BOOKLET CRT 8-2 A-P-A-E-AUUE 11kW 3x4D 5Hz Grundfos Pump 96117234 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crt8/96117234/crt-8-2-a-p-a-e-auue.html
More informationKLINGER soft-chem. Benefits: Key features: Certificates and approvals: Properties: Industries:
KLINGER soft-chem KLINGER soft-chem brings the sealing technology on a new level and it is the best choice for operating conditions up to 260 C. Multi-directional expanded PTFE Excellent corrosion resistance
More informationAntifreeze Resistant Fatigue Resistant Gasoline Resistance Automotive Under the Hood ASTM D 4066 PA012G30 ASTM D 6779 PA012G30
Vydyne R530H Nylon resins are general purpose polyamide, heat stabilized, hydrolysis resistant, 30% glass fiber reinforced resins. Available in natural and black. It is specifically designed to maximize
More informationISO INTERNATIONAL STANDARD. Road vehicles Brake lining friction materials Product definition and quality assurance
INTERNATIONAL STANDARD ISO 15484 First edition 2008-08-01 Road vehicles Brake lining friction materials Product definition and quality assurance Véhicules routiers Matériaux de friction pour garnitures
More informationCONDUCTIVE COMPOUNDS. CABELEC Conductive Compounds Product Selection Guide
CONDUCTIVE COMPOUNDS CABELEC Conductive Compounds Product Selection Guide Cabot s Performance Materials: Over 130 Years of Getting You Where You Want to Go Cabot Corporation is a global performance materials
More informationh Technical Product Data FW Pressure Pipe Systems
h Technical Product Data FW Pressure Pipe Systems E Engineering GmbH All rights reserved. Publication: 10/2012 All rights reserved. No part of this document may be reproduced or utilized in any form or
More informationSFI SPECIFICATION 1.2 EFFECTIVE: FEBRUARY 9, 2006* PRODUCT: Multiple Disc Clutch Assemblies for Vehicles with Naturally Aspirated Engines
SFI SPECIFICATION 1.2 EFFECTIVE: FEBRUARY 9, 2006* PRODUCT: Multiple Disc Clutch Assemblies for Vehicles with Naturally Aspirated Engines 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes
More informationSFI SPECIFICATION 18.1 EFFECTIVE: JUNE 17, 1999 *
SFI SPECIFICATION 18.1 EFFECTIVE: JUNE 17, 1999 * PRODUCT: Crankshaft Hub Harmonic Dampers 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and minimum standards for
More informationCRK 2-180/18 A-W-A-AUUV 3x230/400V 60HZ
GRUNDFOS DATA BOOKLET CRK 2-18/18 A-W-A-AUUV 3x23/4V 6HZ Grundfos pump 497178 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crk2/497178/crk-2-18-18-a-w-a-auuv.html
More informationMini contactors B6, BC6 with 3 pole
Data sheet Mini contactors B6, BC6 with 3 pole Mini contactors from ABB are used for remotely ling motors and other loads wherever space is at a premium. These devices feature hum free coils, shallow depth,
More informationVISCOBASE Synthetic Base Fluids. Economical solutions for high-performance automotive and industrial gear oils
VISCOBASE Synthetic Base Fluids Economical solutions for high-performance automotive and industrial gear oils High-performance base fluids and lubricant additives The oil additives specialists at Evonik
More informationCompany name: Created by: Phone: Note! Product picture may differ from actual product
Date: 13/03/2017 Tender Text Note! Product picture may differ from actual product Product No.: 98993055 MTH4-5/5 A-W-A-AQQV Multistage, immersible, self-priming, centrifugal pump for vertical installation
More informationÅLASTRON S.A. Ag. Ioannis str., Ag. Ioannis Aspropyrgos Tel.: Fax:
ÅLASTRON S.A. Ag. Ioannis str., Ag. Ioannis 193 00 Aspropyrgos Tel.: +30 210 5515000 Fax: +30 210 5515015 www.elastron.gr elastron@elastron.gr 1 RECTANGULAR HOLLOW SECTIONS (EN 10219) Dimensions Cross
More informationSFI SPECIFICATION 1.3 EFFECTIVE: MAY 23, 2000 * PRODUCT: Nitro-Methane Drag Race Multiple Disc Clutch Assemblies
SFI SPECIFICATION 1.3 EFFECTIVE: MAY 23, 2000 * PRODUCT: Nitro-Methane Drag Race Multiple Disc Clutch Assemblies 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and
More informationUniversity of TN Chattanooga Physics 1040L 8/28/2012
PHYSICS 1040L LAB 5: MAGNETIC FIELD Objectives: 1. Determine the relationship between magnetic field and the current in a solenoid. 2. Determine the relationship between magnetic field and the number of
More informationBenteler Distribution. Steel tube solutions for hydraulic and pneumatic applications
Benteler Distribution Steel tube solutions for hydraulic and pneumatic applications Benteler Distribution Customized steel tube solutions for challenging requirements Benteler Distribution is an internationally
More informationDELO -ML DB133 anaerobic and UV-curing adhesive
DELO -ML DB133 anaerobic and UV-curing adhesive Base - Modified urethane acrylate - one-component, solvent-free - dual-curing adhesive Use - for impact-resistant metal bondings - for mixed bondings with
More information