01/24/2008 Page 1 PART NO S DESCRIPTION QTY ID < == Type III Model 164 Commando /01/05 == 1 MARQ Updated 11/5/07

Transcription

1 4402 NON Priced DEALER: Factory CUSTOMER: Stock Open Exp. Date: 10/08/2005 Quote No: Job/Order No: /24/2008 Page 1 < == Type III Model 164 Commando /01/05 == 1 MARQ Updated 11/5/07 VIN 1FDXE45P18DA42612 CHASSIS 1 MARQ < Chassis, 2008 Ford E-450SD Cutaway, 158" WB Diesel 1 MARQ Includes CD radio, daytime running lights S > -- Ford Chassis Standard Warranty 1 MARQ <> -- Running Boards, One (1) Pair ADP (Type III) 1 MARQ Note body width before fabricating Valley #RBSTDELEFT/RIGHT or RBSD E L/R (Super Duty) Mudflaps, Front, Included with Running Boards 1 MARQ > -- Mirrors, Sail Mount, Velvac Heat/Motor/Turns STD- E-Series 1 MARQ VELVAC heated/motorized/turn signals - black finish - mirror heads - Velvac 2020 for 96" wide body, black finish, std mirror heads (#715422) No Keyless Entry System Required 1 MARQ < -- Spare Tire, Shipped Loose 1 MARQ Deletes the mounting bolt, nut and plate Wheel Sims - Dicor 16", Set of Four (4) 1 MARQ

2 01/24/2008 Page 2 V160F Siren Speakers, Ford E-Series, TIII Recessed in Bumper 1 MARQ Cast products #SAD/P4319 CHASSIS COMPONENTS AND ACCESSORIES 1 MARQ Front End Alignment, Chassis Pre-Delivery w/printed Report 1 MARQ Montieth Tire AMBULANCE CONVERSION 1 MARQ Conversion, Type III, Model 164 Commando 1 MARQ Conversion, Type III, Headroom, 72" ILO 68" 1 MARQ Conversion, Type III, Body Width, 96" (Standard) 1 MARQ Conversion, Type III, Body Length, 164" (Standard) 1 MARQ MODULE CONSTRUCTION 1 MARQ Roof Construction, 12" o.c. (Standard) 1 MARQ Wall Construction, 12" o.c. (Type III) 1 MARQ Walk-Thru, Type III, Sliding Door w/ Fixed Plexi Window 1 MARQ < -- Bulkhead Wall, Walk-Thru, Sliding Door (Standard) (PN) 1 MARQ Includes fixed Plexi window Floor Construction, (Standard) 1 MARQ < Body-to-Chassis Mounting, Type III (Standard) 1 MARQ Coat ALL steel members under the body w/ Dolphin undercoating prior to installation UNDERCOATING and INSULATION 1 MARQ < Undercoating, Underside of Module Floor (Standard) 1 MARQ applied to entire underside of module floor prior to mounting on the chassis. Dolphin # Insulation, Walls and Ceiling, 2" Fiberglass Batt (Standard) 1 MARQ Insulation, Entry Doors, 1" Plank Foam (Standard) 1 MARQ EXTERIOR BODY TRIM and ACCESSORIES 1 MARQ < Stone Guards, ADP, Front Wall (Standard) 2 MARQ.072 ADP installed on the lower portions of the front wall, outboard of the chassis - see prints

3 01/24/2008 Page Rub Rails, Skirt Line, One (1) Set ADP (Standard) 1 MARQ < Sill Trim, Skirt Line, One (1) Set ADP ILOS 1 MARQ.072" Tread Brite Fenderettes, One (1) Pair Stainless Steel (Standard) 1 MARQ Thomas Hardware: Type III - #TH4026 Type I w/ 215/16 tires - #TH4026 Type I w/ 235/16 or 225/19.5 tires - #TH4024 Type I w/ LT225/19.5 or 245/19.5 tires - #TH S Fuel Fill Bezel, Cast Aluminum 1 MARQ Cast Products #FG < Drip Rail Trim Mouldings Over Door Openings (Standard) 1 MARQ Mouldings to extend no more than 1/4" beyond each side of the door openings <>Rear Bumper Assembly, Kick-Up w/ Gas Struts (Std.) 1 MARQ Gas struts return bumper to "down" position Rear Riser,.125" ADP (Standard) 1 MARQ License Plate Bracket, Recessed (Standard) 1 MARQ Cast Products #LP Mudflaps, Rear, One (1) Pair Rubber 1 MARQ COMPARTMENT CONSTRUCTION and COMPONENTS 1 MARQ < Streetside-Front Compartment, ADP (Std.) 1 MARQ.125" ADP - 1" dished floor < Streetside #2 Compartment, ADP (Std.) 1 MARQ.125" ADP, sweep-out floor No Streetside Wheelwell Compartment Required 1 MARQ < -- CPR Seat w/ Hinged Backrest and Seat 1 MARQ Includes lap style seat belt <>Streetside-Rear Compartment, ADP (Type III Std.) 1 MARQ.125" ADP - 6" dished floor ALS Compartment Door (Standard) 1 MARQ < Compartment, Curbside, for Battery Storage 1 MARQ

4 01/24/2008 Page 4 Smooth.125" aluminum, sweep out style floor, front hinged door w/ single center mounted Nader, install nylon strap as door hold-open Tray and slides specified below S -- Slide-Out Tray, Floor Mount in Curbside Battery Compartment 1 MARQ Kwikii Battery Kit - Double Triple < Curbside Intermediate Compartment, ADP, IATS 1 MARQ.125" diamond plate - sweep-out design - see prints S < Curbside-Rear Compartment, ADP, 1" Dished Floor (Std.) 1 MARQ.125" ADP - 1" dished floor Side Entry Stepwell, Type III, ADP (Standard) 1 MARQ Vertical Divider, Fixed ADP in SS#1 Compartment (Standard) 1 MARQ < Vertical Divider, Fixed ADP in CS-Rear Compartment (Std.) 1 MARQ See prints < Adjustable Shelf in SS#2 (Standard) 1 MARQ.125" smooth aluminum, includes two Marque EZ-Adjust shelf brackets and black pinch trim installed on the outside edge of the shelf < Compartment Adjustable Shelf Tracks (Standard) 1 MARQ Continuous slot aluminum Plastic Tiles on Compartment / Shelf Floors (Standard) 1 MARQ Mateflex Versaflex - Black MODULE DOOR CONSTRUCTION and COMPONENTS 1 MARQ Extruded/Pan Formed Hybrid Doors (Standard) 1 MARQ Compartment and Entry Door Latching Hardware (Standard) 1 MARQ Compartment Door Handles, Trimark (Standard) 7 MARQ Tri-Mark # Trimark, Chrome Exterior 7 MARQ Tri-Mark #

5 01/24/2008 Page Curbside Entry Door (Standard) 1 MARQ Curbside Entry Door Handles, Tri-Mark 1 MARQ Trimark, Chrome Exterior 1 MARQ Tri-Mark # S -- Trimark Autostyle, Interior Locking 1 MARQ Tri-Mark # Rear Entry Doors (Standard) 1 MARQ Rear Entry Doors, Cast Grabber Door Checks (Standard) 1 MARQ Cast Products DH Rear Entry Door Handles, Tri-Mark 1 MARQ Trimark, Chrome Exterior 1 MARQ Tri-Mark # S -- Trimark Autostyle, Interior Locking 1 MARQ Tri-Mark # S -- Trimark Autostyle, Interior Non-Locking 1 MARQ Tri-Mark # <> -- Entry Door Handle, Tri-Mark IATS 1 MARQ Install exterior paddle handle of the left-rear entry door - deletes the interior pivot plate assembly > -- Tri-Mark Exterior L-Rear Entry Door 1 MARQ Tri-Mark WINDOWS 1 MARQ Window, Side Entry Door, Upper (Standard) 1 MARQ Clearvision Windows, Rear Entry Doors, Upper (Standard) 2 MARQ Clearvision <>Window Over Squad Bench, Pre-Frame Only 1 MARQ Pre-frame for a typical 18" x 36" window unless specified otherwise MISCELLANEOUS BODY COMPONENTS 1 MARQ

6 01/24/2008 Page 6 INTERIOR FEATURES and COMPONENTS 1 MARQ CEILING COMPONENTS 1 MARQ < Grab Bar, Above Cot, 1.25" x 96" Stainless Steel (Standard) 1 MARQ all fastening points must fall on roof tubes or backer plates - See print Brey Krause 6719-SS w/ welded center support UPHOLSTERY 1 MARQ <>Upholstery, Seamless Vinyl, Solid Color (Standard) 1 MARQ solid color vacuum formed Upholstery Color, Wedgewood Blue 1 MARQ < Padded Vinyl Trim (Standard) 1 MARQ Vertical and horizontal edges above the monitor/defib and action area FLOOR COVERING 1 MARQ < Flooring, Lon Seal "Lon Plate II" (Standard) 1 MARQ No cant strips in floor coves - roll flooring tightly into corners - 3" recessed cove at streetside cabinets, full height roll at squad bench riser unless specified otherwise < -- Flooring Color, "Lon Plate II", Gunmetal #424 1 MARQ NOTE: 1/14/08 FLOORING COLOR TO BE GUNMETAL 424. SILL, SCUFF and COT WHEEL PLATES 1 MARQ Floor Sill Plates, Brushed Stainless Steel (Standard) 1 MARQ ATTENDANT'S SEAT 1 MARQ Attendant's Seat, EVS Seamless 1 MARQ EVS Ltd. # Attendant's Seat Base, EVS Swivel 1 MARQ EVS 185S

7 01/24/2008 Page 7 ENTRY DOOR FINISHES and COMPONENTS 1 MARQ < Entry Doors, Upper Liners, Aluminum w/ Multispec Face ILOS 1 MARQ Full Height - Waters Edge Entry Door Grab Bars, 1.25" S/S, 45 "V" Style 3 MARQ Brey-Krause: V-6769-SS - 14" x 14" (overall) w/45 degree bend and welded stanchion at center FRONT CONSOLE 1 MARQ <>Console, Cab, Type III Ford Floor Mount 1 MARQ Ford Gray FORMCO < -- Cup Holder Extension, ABS, Added to Cab Console 1 MARQ Screw the ABS extension to end of console - install two (2) black 4" cupholders in the extension ELECTRICAL FEATURES and COMPONENTS 1 MARQ 12 VOLT POWER COMPONENTS 1 MARQ >Idle Control, OEM Electronic Throttle (Standard) 1 MARQ Ford APC or OEM cruise/pto control depending upon chassis Volt Load Center Location [J-Box] (Standard) 1 MARQ >12 Volt Electrical System, RC Tronics EPC5 1 MARQ > Volt Electrical System, RC Tronics EPC5 1 MARQ <> -- Warning Light Sequencer System (RCT) 1 MARQ Sequencer to operate on load start-up only RCT EPC-5 system: #RCT <> -- Driver's Control Console Gauges 1 MARQ mounted in the front switch panel Hourmeter (RCT658) Ammeter (RCT659) Voltmeter (RCT660) Hall Effect sensor (HECS201)

8 01/24/2008 Page Console Gauges, Analog Ammeter RCT 1 MARQ RCT Console Gauges, Analog Voltmeter RCT 1 MARQ RCT Console Gauges, Digital Hourmeter RCT 1 MARQ RCT Hall Effect Sensor for Ammeter 1 MARQ HECS Warning Light Flasher, TST #PSF MARQ Warning Light Flash Pattern, K-Spec (Standard) 1 MARQ < Module Power Disconnect Switch, TST Remote (Std.) 1 MARQ mounted in the J-box and wired to operate with the ignition switch w/ no delay unless indicated otherwise TST CDR <>Battery Charger/Converter, Pre-Wire (Type III) 1 MARQ Includes a power and ground lead terminated behind the driver's seat - if inverter w/ battery charger is also specified, route wiring to the location specified in the inverter option Volt Recepts, Cigarette Lighter Style, Two(2) 1 MARQ < Volt Recepts, Cigarette Lighter Style 2 MARQ (1) in the Action Area, (1) in the ALS cabinet unless specified otherwise LITECO Y-014BC/RCW >Clock, Analog, Battery Operated, Trin-Tec 1 MARQ < -- Clock, Analog, Battery Operated, Trin-Tec 1 MARQ Installed on rear wall CS of rear doors - attached w/ 3M Dual-Loc fasteners - includes AA battery INTERIOR LIGHTING and COMPONENTS 1 MARQ Dome lights, Dual Filament Incandescent, Eight (8) 1 MARQ Dome lights, Dual Filament Incandescent 8 MARQ Weldon Fluorescent Light(s), 39" Liteco Pulsar, Two (2) 1 MARQ

9 01/24/2008 Page < -- Fluorescent Light(s), 39" Liteco Pulsar 2 MARQ see print for location - requires backer plates in ceiling - order w/ warm white bulbs Liteco # <>Timer, 30 Minute w/ Hold Feature 1 MARQ installed in the curbside wall adjacent to the side entry door for fluorescent lights - see prints McMaster-Carr #7014K Entry Door Reflectors 1 MARQ < -- 3" round reflector - Red 3 MARQ Install 3" round reflectors < Action Area Light, Liteco 8" Slimline Incandescent 1 MARQ wired to switch in AA switch panel Liteco # EXTERIOR LIGHTING and COMPONENTS 1 MARQ DOT LIGHTING 1 MARQ DOT Clearance and Marker Lighting, Type III Models 1 MARQ DOT Clearance and Marker Lighting RED 7 MARQ MCL13RB DOT Clearance and Marker Lighting AMBER 7 MARQ MCL13AB < -- Corner Lights Feature, (4) Lower Module Corners 1 MARQ Use Micro Plastics round head Nylon inserts for these lights. Requires four (4) Cast Products LH14702 corner light bezels

10 01/24/2008 Page Corner Guards, Four (4) ADP w/ Corner Light Cutouts 4 MARQ Corner Light Bezel 4 MARQ Cast Products LH DOT Clearance and Marker Lighting RED 6 MARQ MCL13RB DOT Clearance and Marker Lighting AMBER 6 MARQ MCL13AB FRONT MODULE WALL EXTERIOR LIGHTING 1 MARQ S -- Lightbar, Front, Whel 4504 Special (52") Hal Warn. 1 MARQ < -- Lightbar, Front, Whelen 4504 Special (52") 1 MARQ wire rotators to FRONT LIGHTBAR switch, wire flasher to Primary/Secondary CR-RR-CH-RR-CR Warn. Light, Front Passenger Side, Whel Hal w/f 1 MARQ Whelen,7x9,Red,Halogen,w/ flange 1 MARQ 90F000RR Warn. Light, Front Driver Side, Whel Hal w/f 1 MARQ Whelen,7x9,Red,Halogen,w/ flange 1 MARQ 90F000RR CAB / CHASSIS EXTERIOR LIGHTING 1 MARQ Warn. Light, Grille, Pass. Side, Whel Hal Warn. Ford E 1 MARQ

11 01/24/2008 Page S -- Grille Bezel, E-Series Ford, Pass. Side 1 MARQ Cast LH S -- Whelen,500 Series,Red,LED,w/o flange 1 MARQ 50R03ZRR - Flashing w/color Lens Warn. Light, Grille, Driver Side, Whel Hal Warn. Ford E 1 MARQ S -- Grille Bezel, E-Series Ford, Driver Side 1 MARQ Cast LH S -- Whelen,500 Series,Red,LED,w/o flange 1 MARQ 50R03ZRR - Flashing w/color Lens Warn. Light, Intersection, Pass. Side, Whel Hal Warn MARQ S <> -- Intersection Bezel, Polished Aluminum w/ 15 Tilt 1 MARQ polished aluminum - 15 degree forward tilt housings for intersection lights Cast Products #LH Whelen,3x7,Red,Halogen,w/o flange 1 MARQ 70F000RR Warn. Light, Intersection, Driver Side, Whel Hal Warn MARQ S <> -- Intersection Bezel, Polished Aluminum w/ 15 Tilt 1 MARQ polished aluminum - 15 degree forward tilt housings for intersection lights Cast Products #LH Whelen,3x7,Red,Halogen,w/o flange 1 MARQ 70F000RR Additional Cab / Chassis Lighting 1 MARQ REAR MODULE WALL EXTERIOR LIGHTING 1 MARQ Lightbar, Rear, None Required, Whel Hal Warn. w/f 1 MARQ Lightbar, Rear, None Required 1 MARQ Warn. Light, Rear Passenger Side, Whel Hal w/f 1 MARQ Whelen,7x9,Red,Halogen,w/ flange 1 MARQ 90F000RR Scene Light, Rear Passenger Side, Whel w/f 1 MARQ Whelen,7x9,Clear,Scene,w/ flange 1 MARQ

12 01/24/2008 Page 12 90E000ZR Warn. Light, Rear Center, Whel Hal w/f 1 MARQ Whelen,7x9,Amber,Halogen,w/ flange 1 MARQ 90F000AR Scene Light, Rear Driver Side, Whel w/f 1 MARQ Whelen,7x9,Clear,Scene,w/ flange 1 MARQ 90E000ZR Warn. Light, Rear Driver Side, Whel Hal w/f 1 MARQ Whelen,7x9,Red,Halogen,w/ flange 1 MARQ 90F000RR Additional Rear Module Wall Lighting 1 MARQ Whelen,7x9,Red,Halogen,w/ flange 2 MARQ 90F000RR Whelen, 7x9 Chrome Flange 2 MARQ STOP, TAIL, TURN, AND BACKUP LIGHTING 1 MARQ <> -- T/B/T/BU Lights, Whelen,4x6,LED,dual turns 1 MARQ Includes one (1) pair of brake/tail lights, one (1) pair of turn signals, and one (1) pair of back-up lights mounted on the rear exterior module wall. Includes one (1) pair of turn signals mounted on the front exterior module wall Whelen,4X6,Amber,Turn LED,w/ flange 4 MARQ 60A00TAR

13 01/24/2008 Page Whelen, 4x6 Chrome Flange 4 MARQ 6EFLANGE Whelen,4X6,Red,Brake/Tail LED,w/ flange 2 MARQ 60R00XRR - Maximum Intensity Whelen, 4x6 Chrome Flange 2 MARQ 6EFLANGE Whelen,4X6,Clear,Backup,w/ flange 2 MARQ 60J000CR Whelen, 4x6 Chrome Flange 2 MARQ 6EFLANGE CURBSIDE MODULE WALL EXTERIOR LIGHTING 1 MARQ Warn. Light, CS Front, Whel Hal w/f 1 MARQ Whelen,7x9,Red,Halogen,w/ flange 1 MARQ 90F000RR Scene Light, CS Front, Whel w/f 1 MARQ Whelen,7x9,Clear,Scene,w/ flange 1 MARQ 90E000ZR Scene Light, CS Rear, Whel w/f 1 MARQ Whelen,7x9,Clear,Scene,w/ flange 1 MARQ 90E000ZR Warn. Light, CS Rear, Whel Hal w/f 1 MARQ Whelen,7x9,Red,Halogen,w/ flange 1 MARQ 90F000RR

14 01/24/2008 Page 14 STREETSIDE MODULE WALL EXTERIOR LIGHTING 1 MARQ Warn. Light, SS Front, Whel Hal w/f 1 MARQ Whelen,7x9,Red,Halogen,w/ flange 1 MARQ 90F000RR Scene Light, SS Front, Whel w/f 1 MARQ Whelen,7x9,Clear,Scene,w/ flange 1 MARQ 90E000ZR Scene Light, SS Rear, Whel w/f 1 MARQ Whelen,7x9,Clear,Scene,w/ flange 1 MARQ 90E000ZR Warn. Light, SS Rear, Whel Hal w/f 1 MARQ Whelen,7x9,Red,Halogen,w/ flange 1 MARQ 90F000RR ARROW LIGHTBARS 1 MARQ No Arrow Bar Required 1 MARQ <>Pre-Wire for Future Strobe Capability 4 MARQ Intersection, and rear thru window level warning lights. HEADLIGHT STROBES 1 MARQ WARNING LIGHT and HEADLIGHT FLASHERS 1 MARQ

15 01/24/2008 Page 15 STROBE POWER SUPPLIES 1 MARQ AUXILIARY LIGHTING 1 MARQ < Compartment Lights, 4" Recessed Incandescent (Standard) 5 MARQ one (1) per compartment - if installed below the floor line, seal backside of flange w/ foam tape Liteco # < Spotlight, Handheld, Optronics "BlueEye", 400,000 CP (Std.) 1 MARQ Hard wired under passenger seat REFLECTORS 1 MARQ < 1" x 4" Reflector - Red (standard) 4 MARQ installed on the lower rear of the streetside and curbside walls just above the rubrail and in the right corners of the rear wall just above the rear riser. Grote AUDIBLE WARNING DEVICES 1 MARQ Refer to Chassis Section Above for Correct Siren Speakers 1 MARQ Back-up Alarm, 90 dba (Standard) 1 MARQ Siren, Whelen 295HFS2 (all consoles) 1 MARQ COMMUNICATION PROVISIONS AND EQUIPMENT 1 MARQ >Antenna Base, Coax, Power and Ground Wires (Standard) 1 MARQ < -- Antenna Base, Coax, Power and Ground Wires 1 MARQ (1) Motorola style with RG58U coax w/pl-259 end connector, 10 ga. power and ground wires - label the base and coax end ANT#1 - terminate to module roof to driver seat in cab. Hutton - Maxrad K-794 (if 17' req'd.) - or - Maxrad KE-794 (if 30' req'd.) S >Antenna Base, Coax(es), Power and Ground Wires IATS 1 MARQ

16 01/24/2008 Page XS < -- Antenna Base, Coax, Power and Ground Wires 1 MARQ (1) Motorola style with RG58U coax w/pl-259 end connector, 10 ga. power and ground wires - label the base and coax end ANT#2 - terminate to the module roof to the A/A Hutton - Maxrad K-794 (if 17' req'd.) - or - Maxrad KE-794 (if 30' req'd.) ENVIRONMENTAL SYSTEMS AND COMPONENTS 1 MARQ < Heat / AC, Pro Air Ducted Combo System 1 MARQ NOTE: before installing the ducts, spray or roll Temp Coat to the bottom side of the roof metal between the center hat section and the first "Z" rails to serve as a thermal break < -- Thermal Break for Ducted Heat/AC Option - (PN) 1 MARQ install 1/2" rigid foam insulation above ducts down center wire chase Heat / AC Pro Air #935 12v Ducted Combo System 1 MARQ HEAT/AC: Pro Air 935 w/ top discharge Heat / AC Water Valve 1 MARQ Pro Air Heat / AC Duct Adapters 8 MARQ Pro Air Heat / AC Ducted Vents 8 MARQ Pro Air Heat / AC Ducted Vent Retainers 8 MARQ Pro Air Heat / AC Ducted Vent Adapter 8 MARQ ACC # A Heat / AC Ducting 1 MARQ ACC # A Heat / AC Plenum 1 MARQ ACC #MAR

17 01/24/2008 Page Heat / AC Face Plate 1 MARQ Prodesign Heat / AC Pad 1 MARQ Larry's Upholstery Heat / AC, Combo System Installed Above Walk/Pass-Thru 1 MARQ Thermostat, Pro Air (Standard) 1 MARQ Pro Air Exhaust Fans, Dual 12V Blowers (Standard) 1 MARQ Exhaust Fans, 12V Blower 2 MARQ Attwood Marine Turbo 4000 # (2 req'd) 110 VOLT WIRING AND COMPONENTS 1 MARQ < 110 Volt AC Wiring And Components, Type II and III 1 MARQ Electrical system Volt - circuit breaker box installed behind the driver's seat w/gfi breaker Shoreline, 15A Straight Blade, Pass & Seymore 1 MARQ Inlet: Odyssey (Pass & Seymore #5278-SS) Connector: Wesco (Bryant 5266N) Cover Plate: Odyssey (Pass & Seymore WPG1) <>Inverter, Pre-Wire (Standard) 1 MARQ SS Recepts, 110V AC Hospital Grade Duplexes 1 MARQ < -- Recepts, Interior 110V AC Hospital Grade Duplex 3 MARQ (1) in Action Area, (1) in Defib. area, (1) in ALS cabinet Recept: All-Phase (Hubbell #HBL8200ILI) Box: Odyssey #9331-EWK Cover: All-Phase (Hubbell S8) CABINET CONSTRUCTION 1 MARQ >Interior Cabinetry, Plywood Commando 1 MARQ <> -- Interior Cabinetry, Split Laminate Feature ILOS 1 MARQ Upper - Greystone Glossy Lower - From L3 cabinet down on SS only - Blue Pavia Glossy

18 01/24/2008 Page 18 CEILING FINISHING 1 MARQ Headliner, Patient Compartment, Wood Backed Plastic 1 MARQ Parkland Plastics ELECTRICAL (J-BOX) CONSTRUCTION 1 MARQ Electrical (J-Box) - Standard Configuration 1 MARQ ALS CABINET 1 MARQ ALS Cabinet - Standard Configuration 1 MARQ SQUAD BENCH and COMPONENTS 1 MARQ < -- Squad Bench Base, Wood Construction 1 MARQ Includes seat belts for three seated occupants or one stretcher < -- Floor Cove, Full Height at Squad Bench Riser 1 MARQ Flooring rolls up the face of the riser - full height Squad Bench Lid, Single, 3/4" Plywood 1 MARQ Squad Bench Interior, Plywood w/ White Lam 1 MARQ <> -- Sharps Disposal, Recessed At Head Of Squad Bench IATS 1 MARQ Container stored under squad bench lid - accessed via 4" hole in squad bench lid w/ hinged Red Plexi "tombstone" style cover - see prints Trim hole w/ black plastic cup holder (modified) Requires (1) vinyl Bio-Hazard sticker LaVanture 78-3DJBLK sticker - EMEDCO #42513V <> -- Trash Disposal, Recessed At Head Of Squad Bench IATS 1 MARQ Container stored under squad bench lid - accessed via 6" hole in squad bench lid w/ hinged Red Plexi "tombstone" style cover - see prints Trim hole w/ black plastic trash ring Requires (1) vinyl Bio-Hazard sticker Outwater Plastics #38BK sticker - EMEDCO #42513V

19 01/24/2008 Page <> -- Portable O2 Storage, Recessed Under Head Of Squad Bench 1 MARQ Requires extended side entry step-well area < -- Safety Webbing At Forward End of Squad Bench 1 MARQ safety webbing from squad bench to ceiling at forward end - seatbelt buckles at top and bottom - add backer plates in ceiling - thru-bolt at squad riser or lid w/ backer plates Larry's Upholstery No Dry Erase Writing Board Required 1 MARQ <> -- Cabinet Above Squad Bench 1 MARQ See prints < -- KKK Compliancy Regarding Overhead Cabinetry 1 MARQ The inclusion of a cabinet over the squad bench or CPR seat on a unit with less than 72" headroom will result in the unit not meeting KKK specification requirements. Marque Ambulances has informed the end user of the KKK requirements and this cabinet has been added at the request of, and according to the specifications of, the end user. STREETSIDE CABINETRY 1 MARQ Streetside Cabinetry - Standard Configuration 1 MARQ CPR SEAT 1 MARQ Refer to Part #14-25-xxxx for CPR Seat Construction Info. 1 MARQ CPR Seat Interior, Plywood w/ White Lam 1 MARQ ACTION / MONITOR-DEFIB. AREA COMPONENTS 1 MARQ <> -- Countertop, Action Area, Solid Surface Material 1 MARQ Build cabinets with flat counter tops (no lips) - bottom screws in back wall to be lowered and sunk flush so they are hidden by the solid surface top - color to match the action area counter > -- Solid Surface Countertop Color - Flannel (Granite) 1 MARQ Gemstone <> -- Countertop, Monitor/Defib, Solid Surface Material 1 MARQ Build cabinets with flat counter tops (no lips) - bottom screws in back wall to be lowered and sunk flush so they are hidden by the solid surface top - color to match the action area counter

20 01/24/2008 Page <> -- Pull-Out Drawer Under AA w/ Flip-up Plexi Writing Surface 1 MARQ Interior drawer size: 14" wide x 15" deep x 3" high - fabricate a diamond plate cover to protect the drawer cabinet extending into the SS#2 compartment SLIDES: Thomas TB (14") LATCH: Southco round flush latch SHELVES and SHELVING COMPONENTS 1 MARQ S -- Cabinet Shelves, Plywood w/ Laminate 1 MARQ S <> -- Cabinet Shelf Track, Unistrut Aluminum 1 MARQ Upgrades all interior cabinet shelf tracks - use the standard compartment tracking in the ALS since it is an outside compartment. Thomas-Austin Channel: #TB9111 Channel nuts: #TB9050 DIVIDERS 1 MARQ CABINET DOORS and DRAWERS 1 MARQ < -- Cabinet Doors, General (Plywood) 1 MARQ See prints S < -- Cabinet Door(s) Hinged Restock ILO Hinged Wood 2 MARQ Upper Streetside cabinets > -- No Sliding Plexiglas Cabinet Door Replacements Required 1 MARQ > -- No Picture Frame Wood Cabinet Door Replacements Required 1 MARQ > -- No Hinged Wood Cabinet Door Deletions 1 MARQ > -- No Sliding Plexiglas Cabinet Door Deletions 1 MARQ > -- No Picture Frame Wood Cabinet Door Deletions 1 MARQ Plexiglas Color, Bronze 1 MARQ S <> -- Door/Drawer Latch, Southco Round Flush Pull 1 MARQ see prints > -- No Addtional Hinged Wood Cabinet Door 1 MARQ > -- No Addtional Hinged Korlyte Cabinet Door 1 MARQ > -- No Additional Hinged 1/8" Aluminum Doors 1 MARQ

21 01/24/2008 Page > -- No Additional Hinged 3/8" Plexiglas Doors 1 MARQ > -- No Addtional Hinged Framed Restock. Cabinet Door 1 MARQ > -- No Addtional Sliding Plexiglas Cabinet Door 1 MARQ > -- No Addtional Picture Frame Wood Cabinet Door 1 MARQ > -- No Addtional Picture Frame Korlyte Cabinet Door 1 MARQ > -- No Addtional Roll Up Aluminum Cabinet Door 1 MARQ CABINET DOOR / DRAWER LATCHES and LOCKS 1 MARQ MEDICAL SYSTEMS and COMPONENTS 1 MARQ OXYGEN SYSTEM and EQUIPMENT 1 MARQ Oxygen System - General 1 MARQ On-Board Oxygen Cylinder Bracket, "M" Size (Standard) 1 MARQ On-Board Cylinder Bracket, "M" Size 1 MARQ General Crafts: (1) 7" base, (2) 7" rings Amsafe: 17" equipment strap #108-LOOP 17" Footmans loops - (2) req'd Oxygen Cylinder Wrench (Standard) 1 MARQ Cast Products OA >Portable Oxygen Cylinder Bracket(s), Ferno #521 (Single) 2 MARQ >Oxygen Outlets, Ohio Style Quick Disconnect 1 MARQ < -- Oxygen Outlets, Ohio Style Quick Disconnect 2 MARQ (2) in Action Area >Oxygen Outlets, Ohio Style Quick Disconnect IATS 1 MARQ Amvex < -- Oxygen Outlets, Ohio Style Quick Disconnect 1 MARQ In ceiling above cot. MEDICAL AIR SYSTEM and EQUIPMENT 1 MARQ No On-Board Medical Air System Required 1 MARQ VACUUM SYSTEM and EQUIPMENT 1 MARQ Vacuum System, On-Board (Standard) 1 MARQ Vacuum Outlet, (1) Ohio Style in Action Area (Standard) 1 MARQ

22 01/24/2008 Page Vacuum Outlet, Ohio Style 1 MARQ S -- Vacuum Pump, Thomas (Standard Types I and III) 1 MARQ < -- Vacuum Pump, Gast 1 MARQ Installed in SS#2 w/ aluminum wire mesh guard unless specified otherwise Vacuum, Aspirator, RICO RS4X Disposable (Standard) 1 MARQ IV SYSTEM and EQUIPMENT 1 MARQ IV Hangers, Cast Products Recessed in Ceiling (Standard) 1 MARQ Cast Products #IV IV Hangers, Cast Products Recessed in Ceiling 2 MARQ S > -- IV Hangers, Cast Products Recessed in Ceiling IATS 2 MARQ S -- IV Hangers, Cast Products Recessed in Ceiling 2 MARQ Cast Products #IV BIO-WASTE CONTAINERS 1 MARQ COT AND STRETCHER EQUIPMENT 1 MARQ PRIMARY COTS 1 MARQ No Patient Cot Required 1 MARQ COT FASTENERS 1 MARQ Cot Fastener, Ferno-Washington Dual Position 1 MARQ <> -- Cot Plates/Mounts, Install After Unit is Sold (demos only) 1 MARQ Do not cut mounting holes in the floor or flooring - Installation instructions to be provided at time of install STRETCHERS and EQUIPMENT 1 MARQ DECALS and LETTERING 1 MARQ <>Decals, K-Spec Lettering (Standard - Shipped Loose) 1 MARQ Blue reflective w/ white reflective border - lettering shipped loose: (1) 4" mirror image AMBULANCE (3) 6" AMBULANCE

23 01/24/2008 Page 23 STAR-OF-LIFE DECALS 1 MARQ <>Decals, Star-of-Life Package (Std. - Shipped Loose) 1 MARQ Blue reflective w/ White reflective border Ship loose: (1) 32" SOL, (2) 16" SOLs, (2) 12" SOLs, (2) 6" SOLs CUSTOM DECALS 1 MARQ CUSTOM LETTERING 1 MARQ DECAL STRIPING 1 MARQ PAINT 1 MARQ MODULE PAINT 1 MARQ < Paint, Module, DuPont Imron - White (Standard) 1 MARQ Wheels remain OEM color CHASSIS PAINT 1 MARQ PAINT STRIPING 1 MARQ Paint Stripe, Beltline, Delete (no paint stripe desired) 1 MARQ MISCELLANEOUS EQUIPMENT and COMPONENTS 1 MARQ < Stretcher Strap, Exterior Compartment (Standard) 1 MARQ Installed in CS-rear compartment unless directed otherwise - nylon web strap w/ seat belt clip/buckle and two (2) footmans loops < Interior Safety Signs (Standard) 1 MARQ Two (2) NO SMOKING-OXYGEN EQUIPPED and two (2) FASTEN SEAT BELTS signs, one (1) each in the cab and in the patient compartment

24 01/24/2008 Page < Battery Compartment Warning Sign (Standard) 1 MARQ Installed on the outer face of the battery slide-out tray Owner's Manual / Equipment Packet / OEM Manual 1 MARQ WARRANTIES 1 MARQ >Warranty, Ambulance Module Structure 1 MARQ >Warranty, Ambulance Conversion Electrical 1 MARQ >Warranty, Ambulance General Conversion 1 MARQ >Warranty, Modular Body Paint 1 MARQ