NOTICE OF BID. The City of Pigeon Forge is receiving bids on five trucks for the Public Works Department.

Transcription

1 NOTICE OF BID The City of Pigeon Forge is receiving bids on five trucks for the Public Works Department. Specifications may be obtained from the Public Works Department in City Hall between the hours of 8:00 and 4:30 p.m., Monday thru Friday. All bids must be in sealed envelope with bidders name and address on outside and marked Bid on Pick-ups. Bids will be received until 2:00 p.m., November 15, 2016, at which time they will be opened and read aloud. The City reserves the right to reject any or all bids or to accept the bid most favorable to the City. This 19 th day of October, 2016 Department of Public Works Pigeon Forge, Tennessee

2 BID #1 Specifications for ¾ ton 4x4 Truck with Service Body 2016 or 2017 Year Model Extended Cab (4 door) 4x4 144 Wheelbase (144.2 ) GVWR 9500 Engine 6.0L EFI V8 Transmission 6 speed automatic overdrive Brakes power 4-wheel ABS Steering Power Air Conditioner: Factory Installed Tires Radial to meet GVWR AM/FM radio Power Equipment Group: power mirrors, door locks, keyless entry Battery maintenance free The following items should meet GVWR a. axles: front suspension b. axles: rear c. springs: front and rear Alternator standard Mirrors ext right/left side swing away Dome light Spare wheel under frame with tire Tinted glass all windows Air bags dual 36-gallon minimum fuel tank 3.73 REG AXLE Transfer case 2 speed Skid plates for transfer case Front wheel auto locking Towing package/12.5k Trailer Hitch Tow hooks: Two on front Power outlet 12 volt Color: White Interior Color: Steel grey or black with black vinyl floor covering

3 Specifications for Service Body Knapheide or equal service body for installation on current model year ¾ Ton with 144 wheelbase ( Double Cab with short bed, 42 CA) Body Shell The body shell is to be constructed of 14 gauge two-sided A40 Galvanneal steel. The compartment tops and backs are to be a one piece seamless design. All doors, door openings, drip rails, and other exposed steel edges are to be hemmed for strength, safety, and resistance to corrosion. Floor The floor plate is to be constructed of a minimum of 12 gauge treadplate with a 1 3/8 return flange on each side. The side compartment back panel should overlap and interlock with the floor flange, providing support for the weight of the side compartment. Understructure Cross sills are to be constructed from 11 gauge steel with 50,000 psi minimum yield strength. Tailgate Doors Hinges The tailgate is to be constructed of 14 gauge two-sided A40 Galvanneal steel. The tailgate is to be a minimum of 12 high and be a slammable style. In the open position, the tailgate shall be level with the cargo floor. The tailgate shall not have any cables, chains, or bars to support it in the open position so it can be used as a work surface for objects wider than the tailgate. The doors are to be constructed of 20 gauge two-sided A40 Galvanneal steel. The doors are to be double paneled with internal reinforcements for durability. Corrosion resistant all stainless steel continuous hinges are to be installed to provide full length support for the doors and pry-proof security with a built-in weather shield. Hinges are to be spot welded to the door frames and must be supported with a six year warranty. Rotary Latches Corrosion resistant rotary latches shall be secured to the door panels by four threaded studs attached to the back of the latches. Latches must have zinc die cast handles with a brushed chrome finish that provides ample hand clearance surrounded by an injection molded glass and mineral infused UV resistant nylon housing. The latches must also have an internal injection molded glass and mineral infused UV resistant nylon cover for protection from the contents of the compartments. The rotary latches are to be slam latchable. The latching cams are to be elongated to allow the latches to move vertically relative to the lock strikes to prevent torsional damage. Microcellular urethane foam gaskets are to be installed between the latch flange and the outer door skin to prevent moisture from entering the compartment behind the latch. Lock cylinders are to be flush mounted for additional security. Door Strikers Adjustable strikers are to be affixed to the door frames with screws. (Welded-on door strikers are not acceptable.) Door Seals Automotive bulb type neoprene door seals are to be installed by the manufacturer of the body on all door frames. Door Retainers Double spring over center door retainers are to be installed on all vertical doors. Door retainers need to hold doors in positive open or closed position. (Other types of retainers, like cables or chains, are not acceptable for vertical doors.) Horizontal doors are to be secured in an open position parallel to the ground by heavy duty chain retainers. The chain retainers must be easily removable so that the door can be opened to a full 180 degrees to be able to access the compartment in tight areas. Shelving Shelves are to be constructed of 18 gauge bright spangled galvanized steel. All shelves are to have hemmed dividers on 4 centers. Shelves need to have a minimum capacity rating of 250 lbs.

4 Exterior Prime Paint The body is to be completely immersed in electrodeposition gray epoxy prime paint featuring a zinc phosphate precoat and seal for additional corrosion protection. Prime paint is to be oven cured to provide a hard durable finish. Interior Paint Interior paint is to be a mid-gloss, mar resistant, light gray finish. Undercoating The body is to be completely undercoated by the body manufacturer using a water base acrylic. Installation The manufacturer of the body is to supply a recommended installation process along with detailed installation instructions that conform to all applicable Federal Motor Vehicle Safety Standards. Rear body-to-chassis mounting brackets need to incorporate bumper support as well as provide FMVSS 301 protection. Furthermore, the manufacturer of the body is to supply an owner manual describing the proper care and maintenance of the body for the user. Warranty The following items are to be covered by a minimum six (6) year limited warranty to the first owner/user of record. No Rust-Thru Guarantee Continuous Door Hinges Guaranteed not to fail to operate or come off product. Latches and Lock Cylinders Unconditional guarantee against failure. Shelves Guaranteed not to fail in bending under a maximum 250 lb. rated load. Lighting Lighting is to meet all FMVSS standards. The wiring harness is to be encased in a plastic loom and all wires are to be colored for ease of troubleshooting. The wire harness must have connectors that are compatible with Dodge, Ford, and GM chassis without splicing. The stop/tail/turn and backup lights are to be recessed in the rear of the body. The stop/tail/turn lights are to be LED. All marker, clearance, and R.I.D. lighting is to be LED type lighting. Having incandescent lights in any of these locations is not acceptable. Lighting Wire All interior wiring must be retained by a mechanical fastening system. Other methods of Retention securing the wiring, such as adhesive-backed holders, are unacceptable. Interior Light Guard Light guards are to be installed by the body manufacturer to provide protection for recessed stop/tail/turn and backup lights. The wiring harness needs to be protected also. Bumper Heavy duty 12 ga. Galvanneal bumper with grip tread punched into the step surface. Galvanneal material provides superior corrosion resistance and enhanced paint adhesion. Grip Tread expels mud and provides better slip resistance than treadplate. Designed to have clearance for most existing frame mounted Reese hitch applications. OVERALL LENGTH: 83-1/4 OVERALL WIDTH: 78 FLOOR WIDTH: 49 FLOOR HEIGHT: 24 COMPARTMENT HEIGHT 40 COMPARTMENT DEPTH: 14-1/2 STREETSIDE COMPARTMENTATION: 1V /4 in length x 40 high, (2) adjustable shelves w/ dividers H /4 in length x 18-1/2 high, left empty for larger items 2V /4 in length x 40 high, (1) adjustable shelf w/ dividers CURBSIDE COMPARTMENTATION: 1V /4 in length x 40 high, (2) adjustable shelves w/ dividers H /4 in length x 18-1/2 high, (1) bolt-in divider shelf w/ dividers 2V /4 in length x 40 high, (1) adjustable divider shelf w/ dividers Body, bumper, and lights are to be mounted to manufacturer s specs and body and bumper painted with single stage urethane paint to match cab.

5

6 BID #2 Specifications for Two 1/2 ton 4x4 Trucks 2016 or 2017 Year Model Standard Cab 4x4 119 Wheelbase GVWR 6800 Engine 5.3L EcoTec3 V8 Transmission 6 speed automatic overdrive Brakes power 4-wheel Disc with ABS Steering Power Air Conditioner: Factory Installed Tires Radial to meet GVWR AM/FM radio Power Equipment Group: power mirrors, door locks, keyless entry Battery maintenance free The following items should meet GVWR a. axles: front suspension b. axles: rear c. springs: front and rear Alternator standard Mirrors Foldaway Dome light Spare wheel under frame with tire Tinted glass all windows Air bags dual 25-gallon minimum fuel tank 3.42 REG AXLE Transfer case 2 speed Skid plates for transfer case Front wheel auto locking Towing package/minimum 10.K Trailer Hitch Tow hooks: Two on front Power outlet 12 volt Color: White Interior Color: grey or black with black vinyl floor covering

7 Bid #3 Specifications for ¾ Ton 4x4 Truck with Flatbed 2016 or 2017 Year Model Standard Cab 4x4 134 Wheelbase (133.6 ) GVWR 9500 Engine 6.6L Turbo Diesel V8 Transmission Allison 6 speed automatic transmission Brakes power 4-wheel ABS Steering Power Air Conditioner: Factory Installed Cloth seat trim Dark ash with jet black interior Accents Tires Radial to meet GVWR AM/FM radio Power Equipment Group: power mirrors, door locks, keyless entry Battery maintenance free The following items should meet GVWR a. axles: front suspension b. axles: rear c. springs: front and rear Alternator 220 Amp Mirrors ext right/left side swing away Dome light Spare wheel under frame with tire Tinted glass all windows Air bags dual 36-gallon minimum fuel tank 3.73 REG AXLE Transfer case 2 speed Skid plates for transfer case Front wheel auto locking Towing package/12.5k Trailer Hitch Tow hooks: Two on front Power outlet 12 volt Color: White Interior Color: Dark Ash or black with black vinyl floor covering

8 Specifications for Flatbed Formed, integrated bulkhead with screened window and tapered design to conform to cab contours for improved visibility Bulkhead includes integrated light boxes, each with an oval B/U and S/T/T light Internal stake pockets lining both sides and rear of the platform Rub rails installed on both sides of platform for convenient cargo tie downs Under the floor gooseneck hitch system with 1.31 diameter hole and 2-5/16 ball installed Hinged access door to cover gooseneck hitch when not in use Gooseneck hitch rated at 25,000 lbs. gross trailer weight, 5,000 lbs. tongue weight All marker, clearance, and I.D. lights are LED Safety chain attachment points and 7 way trailer plug included in gooseneck box and at receiver hitch Rear skirt includes integrated light boxes, each with an oval B/U and S/T/T light Rugged 12 gauge tread plate floor with 4 structural channel long sills 12 gauge formed cross sills, spaced on 16 centers Durable oven-cured coat, finish painted black Complete immersion in electrodeposition prime paint system for superior corrosion resistance Length 99" Width 79.6" Weight 695 lbs. Swing Arm Radius 61" Long Sill Spacing 38" Body is installed on customer-supplied 56" CA SRW ¾ Ton pickup truck with bed removed, with a Class V receiver/icc bumper, 15 high stake racks, and mudflaps

9 BID 4 Specifications for ¾ ton 4x4 Truck 2016 or 2017 Year Model Extended Cab (4 door) 4x4 144 Wheelbase (144.2 ) GVWR 9500 Engine 6.0L EFI V8 Transmission 6 speed automatic overdrive Brakes power 4-wheel ABS Steering Power Air Conditioner: Factory Installed Tires Radial to meet GVWR AM/FM radio Power Equipment Group: power mirrors, door locks, keyless entry Battery maintenance free The following items should meet GVWR d. axles: front suspension e. axles: rear f. springs: front and rear Alternator standard Mirrors ext right/left side swing away Dome light Spare wheel under frame with tire Tinted glass all windows Air bags dual 36-gallon minimum fuel tank 3.73 REG AXLE Transfer case 2 speed Skid plates for transfer case Front wheel auto locking Towing package/12.5k Trailer Hitch Tow hooks: Two on front Power outlet 12 volt Color: White Interior Color: Steel grey or black with black vinyl floor covering

10 Bid Sheet Bidder Address Salesperson Phone Bid 1 Delivery Time Bid 2 each Total of Bid #2 Delivery Time Bid 3 Delivery Time Bid 4 Delivery Time