Brookville Catalog 2018.qxp_Brookville catalog 2011 Late 10/3/18 8:59 AM Page 1 Product Catalog

Transcription

1 Product Catalog

2 T hanks for your interest in Brookville products. The beginnings for Brookville Roadster were laid over forty years ago much like the start of other street rodding businesses. Ray Gollahon was just trying to support his own car hobby and make some sheet metal parts needed to restore his own car. As a career metal worker and an avid Model A and 32 enthusiast it was a natural start. The first year, at a 1972 swap meet event he and his wife Donna sold out all of their patch panels and components the first day. After working many nights and weekends in their own garage, the success of the metal parts led to the creation of Antique Auto Sheet Metal, Inc. For the next two decades that company produced literally thousands of much needed replacement parts and body panels for both the collector car market and street rodders too. 2 Special thanks for cars and photos to: The Rodder s Journal, Street Rodder Magazine, Roy Brizio Street Rods, Johnson s Hot Rod Shop, Hot Rods by Dean, Bruce s Rod Shop, SoCal Speed Shop and Mike Chase Photography

3 Table of Contents About the Catalog With this revision of the catalog we had a goal of making our catalog easier to use. Unlike previous versions of the catalog, where the sections were broken up by Model A, 32 Roadster, or 32 Three Window. We have grouped products by category. The catalog is now broken into the following sections: Bodies and Starter Packages Beds Frames, Chassis, and Components Finishing Components Sheet Metal Components Since our bodies are so popular they are all together at the front of the catalog. You can also find out about our Starter Kits to get your dream to a reality in no time as well. Beds directly follow the bodies since they are a great addition to any of our pickup cabs. Frames and chassis are next since they are the perfect foundation for your body. In the finishing Components Section you will find almost everything to complete your body and chassis. Finally the Sheet Metal Components contains all our All Steel components. For a more detailed listing of sections refer to the Table of Contents. We hope that you enjoy using this catalog and of course if you have any questions about any product you can always contact us. Attention California Residents WARNING: This Store sells products that may contain chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. By ordering products for delivery into California, you acknowledge that you received this warning. Please feel free to contact us should you have any questions. For more information go to Table of Contents The Real Steel Story...4 Model A Bodies Roadster Option Guide Roadster Starter Kit Roadster Option Guide Roadster Starter Kit Roadster Pickup Option Guide Roadster Pickup Starter Kit Roadster Pickup Option Guide Roadster Pickup Starter Kit Roadster Bodies Roadster Option Guide Roadster Starter Kit Roadster Pickup Option Guide Roadster Pickup Starter Kit Three Window Coupe Three Window Coupe Option Guide Three Window Coupe Starter Kit...23 Limited Edition Phanton...24 Phanton Option Guide...25 Lakester Bodies...26 Roller and Turnkey Services...27 Model A Beds...28 Model A Bed Option Guide Beds and Option Guide Closed Cab Pickup Package...31 Restoration Services...32 Frames...33 Chassis...34 Model A Frame Option Guide...35 Model A 32 Style Hi-Boy Frame Option Guide Frame Option Guide Model A Chassis Option Guide...38 Model A 32 Style Hi-Boy Chassis Option Guide Chassis Option Guide...42 Frame and Chassis Components...44 Brake Line Kits and Components Labor Charges...49 Finishing Components...50 Grilles, Shells, and Cooling Components Hoods and Hood Components.. 51 Fenders and Components DTS Rod Tops...57 Windshields, Tops, and Components Mirrors...61 Lighting and Accessories License Plate Frames Wiring Kits...63 Battery Trays...63 Steering Columns Engines and Transmission...65 Engine and Transmission Accessories...66 Lokar Products...66 Seats...67 Gauges Dash Inserts...69 Tires and Wheels Gas Tanks...70 Vintage Air A/C Dynamat Roadster Diagrams Roadster Diagrams...79 Sheet Metal Components...86 Subframes and Components Firewalls...88 Cowl Components Dashes...91 Doors and Components...90 Garnish Moldings...95 Quarter Panels and Bracing Decklid and Components...97 Sun Visors and Other Parts Patch Panels and Kits Body Wood and Wood Floors Pickup Components Closed Cab Pickup Components NEW! Ford Truck Bed Components Apparel and Gifts Gallery Ordering Information CustomerService@BrookvilleRoadster.com

4 The Real Steel Story The Brookville Team Of Real American Steel Workers, Fabricators And Office Staff It is a testament to the quality of the products and the foresight of the founders that after forty years not one part number or product produced has ever been discontinued. The goal all along has been to maintain control over every possible step in the manufacturing process. Steady investments in the kind of machinery, technology and skilled craftsmen required to produce these components has resulted in unmatched manufacturing capabilities and award winning product quality. Our own reproduction 1932 Ford Three Window door latch you can see on the next page is an excellent example of just how far we can go to produce the most accurate components for our customers. Virtually every part of this complicated yet reliable latch system must be made by our crew. Over twenty individual pieces must be machined, stamped or turned to the original specs because they simply no longer exist from any supplier. This latch set is representative of every part we manufacture. Each panel, door, deck lid and fender is equal to or superior and will interchange with the original parts they are replacing. How good are they? We won t name names, but cars featuring Antique Auto Sheet Metal and Brookville bodies and parts have won their categories at the Amelia Island Concourse and The Model A Club of America! We had to finally confess in the latter case because it was just to prove the point. After more than twenty years of continued customer loyalty we had another great idea. Since we already had all the separate components to repair any Model A roadster and roadster pickup, why not complete replacement bodies? Thus, Brookville Roadster, Inc. was born. Starting with what we knew best, we first introduced our Model A roadster and the roadster pickup complete bodies in Soon after came the bodies and then our exclusive extended cab versions of the roadster pick-ups. The Model A continues to be a major part of our business and has remained popular with restorers and rodders alike. In fact, Street Rodder Magazine s Editor In Chief, Brian Brennan recently built a beautiful red 29 roadster which you can see on page 6 of this catalog. In 1995, we turned our attention to the grandaddy of all hot rodding, the legendary 1932 Deuce Roadster. Perhaps no other car in American history has meant so much to performance enthusiasts since the day it was first produced. The beautiful lines and rodding legacy are etched into the minds of rodders of all ages. In producing this body, we knew the stakes were high. Over the two year research and development we studied original cars, consulted original blueprints and talked with everyone who could help us produce the most perfect reproduction body possible. In 1997, all of our efforts were rewarded with the National Street Rod Association s Best New Product of The Year award. And more importantly, the Brookville 32 Roadster has been in constant demand by the country s most respected street rod builders since its introduction. Before Brookville, the only choices for street rod bodies were original survivors, with all their years of wear and tear, or fiberglass reproductions. It has been argued that the rodding hobby would not be where it is today without the fiberglass option. The costs to tool-up for a fiberglass body is a fraction of that to manufacture a full steel structure and the relative ease of finish-out made them an attractive alternative. Today, due to rising material costs, fiberglass is not that much lower in cost than a steel reproduction body. Plus, the retained value of steel bodied cars has now proven to far exceed the initial investment difference. And now, after many years on our own, there are others trying the steel body business with varying results. However, there are clear differences in those offerings. Some have enhanced or representative body lines and contours. And some others make changes targeted at buyers used to OEM driving. And naturally, some target price at the expense of thorough engineering and manufacturing principles. Brookville started with, and has always produced, only the most original, most authentic, and most accurate

5 The Real Steel Story body possible in the belief that the details and lines from the past are the reason these cars have remained popular for over eighty years. In 2004, we took our next giant leap. Beyond the iconic 32 roadster, the handsome 32 Three-Window coupe is one of the most popular cars ever produced. Originals are more rare today than roadsters and for everyday cruising or long distance tours, the Three Window makes great sense. But manufacturing this car would be our greatest challenge yet. Many more engineering issues appear with a closed car and we know modern rodders expect twenty-first century fit and finish in their cars. The first step was to completely digitally scan one of our own well preserved original cars using state-of-the-art OEM quality digitizing equipment. This level of accuracy uncovered the inconsistencies in even the highly prized original cars. To manufacture the best possible reproduction body, the variables needed to be eliminated and soon the solution was clear. We then decided to create a huge onepiece stamping of each entire side of the coupe body. This assured that each car would have the exact same door clearances and would greatly strengthen the body structure during final assembly and finishing. The process is modern but the resulting body is accurate right down to the bracing, wood and that complicated door latch we mentioned earlier. We like to believe our 32 Three Window is the Deuce Henry would have built if he d had more time. Ford produced over 700 cars each day in 1932! A remarkable achievement for the time. To meet today s quality requirements, we invest over 100 man-hours in hand finishing each Brookville coupe, even after all the stamping, forging, machining and trimming are completed. We think the results speak for themselves. Our 1932 Three Window Coupe was crowned the 2005 SEMA Best New Product of The Year. Then again in 2006 the Three Window received our second NSRA Best New Product of The Year, plus the Goodguys 2006 Product of The Year and Hot Rod & Restoration Magazine s 2006 Product of The Year! Our newest creations include a full fendered version of our 32 Ford Roadster Pickup, a fender and bed package to build a 32 Ford closed cab truck (seen on page 31). To make our full fendered packages easy to finish and more stylish, we have engineered completely new pick up beds and fenders which incorporate a roadster style fuel tank and 3 Window rear frame horn covers with a custom Every Part Our 32 Three Window Door Latch Assembly Is Precision Made In Our Own Shops chrome spreader bar. Check them out on page 31. Our company story is a group effort. We are proud to have a talented and loyal team of craftsmen that understand the mission of our company. Some of our team have been with us for over 25 years. Our sheet metal foreman joined the company as his very first job and has been with us for over 30 years. This is not work for amateurs. The products are complicated, the accuracy is critical and the machinery can be unforgiving. Our team delivers their best and we are happy to be able to say Made With Pride In America. That s a bit of our history, how we approach our business and some information about our product quality. Whether you are ready to build the perfect new street rod project or simply need to replace some worn old body panels on your original body, Brookville is the right place to start. For your new project there is no better foundation than one of our starter kits. We have created body and chassis packages that will give you a big head start by including most of the major components you ll need. Choose from classic full fendered styles to traditional Hi-Boy fenderless rods, roadster and closed cab pickups or our award winning Three Window coupe. Take the time to dream using the handy work sheets included in each model section. Each package has enough options to fill most needs and we will be happy to discuss any ideas you may have for your dream car. The body section outlines each of our All-Steel models in complete detail. Remember, Brookville bodies can be used on your original frame as well. Thanks again for your interest and we look forward to working with you on your next project. Kenny Gollahon President Always in our thoughts, our founder, Ray was such an innovator in the hot rod industry Ray s vision and skills made a major contribution to, and raised the quality standards of, the antique auto and street rod hobbies throughout his life. His hard earned knowledge and mechanical skills gave Brookville Roadster a firm foundation to build on for many years to come. His kindness and loyalty to his friends, employees, customers and family will continue to set the tone for all of us here at Brookville Roadster. Thanks for your continued support and confidence. CustomerService@BrookvilleRoadster.com

6 Model A Bodies The Car That Started It All The Model A is the car that launched our business almost four decades ago. Our bodies, components and patch panels have remained in demand by both collectors, restorers and rodders because of the quality of the materials and workmanship and most importantly, the accuracy of every original detail. The little black classic at right actually won a Model A Club restoration award! Then we had to confess it was a brand new car! If you re wanting to build a Model A on a stock type frame with full fenders or you prefer the Deuce frame Hi-Boy style rod, we have everything you need for a great start. The car below is the creation of The Rodder s Journal Associate Editor, Geoff Miles. These photos show the attention to detail and finish we engineer into all of our steel bodies. This 29 roadster has some custom changes made by the owner and features some products not included in the basic roadster body or chassis kits. It is for illustration purposes only. 6 Because of the volatility of raw materials and metals we reserve the right to adjust pricing if necessary

7 Model A Bodies Below are the Model A Bodies available. Over the next several pages you can see what is included with each body and what upgrade options are available Roadster Body AF-100-A Stock Roadster Body for Model A Frame $7, AH-100-A Stock Roadster Body for 32 Style Frame $7, AF-100-AUN Unassembled Roadster Body for Model A Frame $5, AH-100-AUN Unassembled Roadster Body for 32 Style Frame $5, All Assembled Bodies Require a $1, Nonrefundable Deposit Optional Cowl Cover Shown Roadster Body AF-100-B Stock Roadster Body for Model A Frame $7, AH-100-B Stock Roadster Body for 32 Style Frame $7, AF-100-BUN Unassembled Roadster Body for Model A Frame $5, AH-100-BUN Unassembled Roadster Body for 32 Style Frame $5, All Assembled Bodies Require a $1, Nonrefundable Deposit Roadster Pickup Body AT-100-A Roadster Pickup Body $5, AT-100-AEXT 6 Extended Cab Roadster Pickup Body $5, AT-100-AUN Unassembled Roadster Pickup Body $4, AT-100-AEXTUN Unassembled 6 Extended Roadster Pickup Body $4, All Assembled Pickup Bodies Require a $1, Nonrefundable Deposit Optional Cowl Cover Shown Always popular to build and restore, the Ford Roadster Pickup was one of our first full body products. We offer complete stock and shortened pickup beds to go with it. This Body can work on our 32 Style Frames or as a Full Fendered Car on a Stock Frame Roadster Pickup Body The Brookville Roadster Pickup body is available as stock length or with a six inch extended cab for more comfort. It fits our original style Model A frames and can be used on our 32 Hi-Boy frame package. We offer a complete shortened pickup bed for 32 Style Frame. This cab also makes a great full fendered vehicle. AT-100-B Stock Roadster Pickup Body $5, AT-100-BEXT 6 Extended Cab Roadster Pickup Body $5, AT-100-BUN Unassembled Stock Roadster Pickup Body $4, AT-100-BEXTUN Unassembled 6 Extended Cab Pickup Body $4, All Assembled Pickup Bodies Require a $1, Nonrefundable Deposit Model A Body Frequently Asked Questions What is the Difference between a Model A Frame and a 32 Style Frame? A Model A Frame is the stock frame and is perfect for an original body or a full fendered build. If you go fenderless we recommend our 32 Style Frame, it has the looks and stability of a 32 frame but fits any of our Model A bodies. What is a Deck Former? The Deck Former is an area around the edge of the rear deck that is rolled to form a smooth look for use with custom seat. Deck Former Installed Please Note: Primer is for illustrative use only. Bodies and sheet metal components do not come primered. CustomerService@BrookvilleRoadster.com

8 Roadster Body Option Guide Choose your Roadster Body on Page 7. Use this page to view what comes standard on a body then you may customize the body to meet your needs with our upgrades. Upgrade pricing is additional to the cost of the body on page 7. Note: Stock means that the Option is included in the Price of the Body. Cowl Top Smooth Cowl Top with Smooth Upper Firewall $ Smooth Cowl Top with Ribbed Upper Firewall $ Smooth Cowl Top with Smooth Upper Firewall and Cowl Vent Installed $ Smooth Cowl Top with Ribbed Upper Firewall and Cowl Vent Installed $ No Cowl Top Stock Supply Your Own Original Gas Tank N/C Dash 32 Style Dash Installed $ No 32 Style Dash Stock Seat Area and Subframe for AF-100-A Stock Pan Under Seat with Seat Riser, Seat Stock Frame, and Seat Back for Stock Subframe Stock Pan Under Seat with Seat Riser, Seat N/C Frame, and Seat Back for 2 Kickup Subframe Stock Pan Under Seat with Seat Riser, Seat, N/C Frame, Seat Back, and Flat Rumble Floor For Stock Subframe. Stock Pan Under Seat with Seat Riser, Seat, N/C Frame, Seat Back, and Flat Rumble Floor For 2 Kickup Subframe. Flat Hot Rod Style Floor for Stock Subframe N/C Flat Hot Rod Style Floor for 2 Kickup Subframe N/C No Floor Pans N/C Floor Pans Not Installed N/C (Check Seat Area Above) Seat Area and Subframe for AH-100-A Hi-Boy Pan Under Seat with Seat Riser, Seat Frame, Seat Back, and Flat Rumble Floor for Hi-boy Subframe N/C Hi-Boy Pan Under Seat with Flat Floor Pans For Hi-boy Subframe Stock No Floor Pans N/C Floor Pans Not Installed N/C (Check Seat Area Above) Front Floor Stock Wood Front Floor Installed Stock Stock Steel Front Floor Installed $ Recessed Steel Front Floor Installed $ Recessed Steel Front Floor Installed $ Recessed Steel Front Floor Installed $ No Front Floor N/C Firewall Stock Firewall with Holes Installed Stock Stock Firewall without Holes Installed N/C 4 Recessed Firewall Installed N/C 5 Recessed Firewall Installed N/C 6 Recessed Firewall Installed N/C Supply Your Own Firewall Installed N/C Windshield Stanchions Plain Stock Height Windshield Stanchions Installed $ Plain 2 Chopped Windshield Stanchions Installed $ Stainless Steel Stock Height Windshield Stanchions Installed $ Stainless Steel 2 Chopped Windshield Stanchions Installed $ No Stanchions Stock Deck Former and Tack Strip Deck Former Installed $ Wood Tack Strip Installed $ Deck Former and Wood Tack Strip Installed $ No Deck Former or Tack Strip Installed N/C 8 Rear Cross Member Stock Rear Cross Member Installed Stock Rear Roll Pan without Lights Installed $ Rear Roll Pan without Lights with Extension Pan Installed $ Rear Roll Pan with Lights Installed $ Rear Roll Pan with Lights with Extension Pan Installed $ Top Irons Tabs Plain Top Iron Tabs Welded In Stock Stainless Steel Top Iron Tabs Welded In $50.00 No Top Iron Tabs N/C Door Style 28 Style Doors with Curtain Rod Holes and Snap Holes N/C 29 Style Doors with Curtain Rod Holes, Door Handle Holes, and Snap Holes N/C Smooth Doors N/C Outside Door Handle Outside Door Handles Installed $ No Outside Door Handles Installed Stock Door Strikers Plain Door Strikers Installed Stock Stainless Steel Door Strikers Installed $30.00 Deck Lid Style Stock Trunk Stock Smooth Trunk N/C Stock Rumble N/C Smooth Rumble N/C Stock Trunk with Hole and Louvers $ Specify Number of Rows of Louvers Stock Trunk without Hole and Louvers $ Specify Number of Rows of Louvers Deck Lid Latch Trunk Latch Installed $ Rumble Latch Installed $ No Deck Lid Latch Installed Stock Deck Lid Handle Deck Lid Handle Installed Installed $80.00 No Deck Lid Handle Installed Stock Deck Lid Catch Plain Trunk Catch Installed Stock Stainless Steel Trunk Catch Installed $25.00 Rumble Catch Installed N/C No Deck Lid Catch Installed N/C Deck Lid Prop Plain Trunk Prop Installed Stock Stainless Steel Trunk Prop Installed $25.00 No Trunk Prop Installed N/C Rumble Grab Handles Rumble Grab Handles Installed $ No Rumble Grab Handles Stock Cowl Light Holes Cowl Light Holes Drilled $ No Cowl Light Holes N/C Crating Crate Body for Shipping $ Tarp and Shrink Wrap Body for Show or Shop Pickup $ No Preparation for Shipping N/C

9 Roadster Starter Kits Starter Packages A Starter Package is a great place to start your roadster dream. It includes a body mounted and shimmed to a fully assembled chassis. Then add our finishing components to get it ready to drive in no time! Full Fender Starter Package Starter Package Includes the following: Body for Model A Style Frame. See page 8 for stock options and body upgrades. Model A Style Chassis. See page 38 for stock options and Chassis upgrades. Assembly of the Chassis to the Rolling Chassis Stage. Mounting the Body to the Chassis and Shimming of the body Hi-Boy Starter Package Starter Package Includes the following: Body for 32 Style Frame. See page 8 for stock options and body upgrades Style (Hi-Boy) Chassis. See page 40 for stock options and Chassis upgrades. Assembly of the Chassis to the Rolling Chassis Stage. Mounting the Body to the Chassis and Shimming of the body Model A Full Fender Starter Package $15, Starter Package Upgrade Options Stainless Steel Chassis Package Upgrade: Upgrade the above chassis to our Stock Stainless Steel Chassis Package. See page 38 for what is included. Chassis Upgrade to Stock Stainless Package $2, Add Popular Body and Chassis Options: Add our most popular body and chassis options to a stock body and chassis. These options include a Steel Front Floor, Deck Former installed in the body, Rear Drum Brakes, and Brake Line Kit Installed. This package can only be purchased with a stock body and chassis. Package Upgrade $1, Add Popular Finishing Options: Add our most popular options to help finish your starter kit. All Items are Sent Loose and do not come installed on the starter kit. Includes: A16610A53FF32: Three Piece Hood for 32 Style Grille Shell B1620PTF: 32 Grille Shell and Insert without Crankhole Fitted to Shell Z-487-1: Walker Radiator Z-Series for Chevy Engine 1002AS: Fender Package SB580C: Mild Steel Tilt Steering Column FR1717DD: 9/16-26x3/4-36 U-Joint FR1790PL: 5/8-36x3/4-36 U-Joint SB598DD18: Plain Double End Splined Shaft 1003-ACHWFKC: Chrome Windshield Kit Package Upgrade $6, Installation of Finishing Options: Includes the labor for the Installation of all the above components. Labor Charge $15, Model A Hi-Boy Starter Package $16, Starter Package Upgrade Options Stainless Steel Chassis Package Upgrade: Upgrade the above chassis to our Stock Stainless Steel Chassis Package. See page 40 for what is included. Chassis Upgrade to Stock Stainless Package $1, Add Popular Body and Chassis Options: Add our most popular body and chassis options to a stock body and chassis. These options include a Steel Front Floor, Deck Former installed in the body, Rear Drum Brakes, and Brake Line Kit Installed. This package can only be purchased with a stock body and chassis. Package Upgrade $1, Add Popular Finishing Options: Add our most popular options to help finish your starter kit. All Items are Sent Loose and do not come installed on the starter kit. Includes: A16610A53HB32: Three Piece Hood for 32 Style Grille Shell B1620PTF: 32 Grille Shell and Insert without Crankhole Fitted to Shell Z-487-1: Walker Radiator Z-Series for Chevy Engine SB580C: Mild Steel Tilt Steering Column FR1717DD: 9/16-26x3/4-36 U-Joint FR1790PL: 5/8-36x3/4-36 U-Joint SB598DD18: Plain Double End Splined Shaft 1003-ACHWFKC: Chrome Windshield Kit Package Upgrade $4, Installation of Finishing Options: Includes the labor for the Installation of all the above components. Labor Charge $12, Finishing Touches We offer a wide variety of products to get your body into a finished car. Finishing Touches start on page 50. Please Note: Primer is for illustrative use only. Bodies and sheet metal components do not come primered. CustomerService@BrookvilleRoadster.com

10 Roadster Body Option Guide Choose your Roadster Body on Page 7. Use this page to view what comes standard on a body then you may customize the body to meet your needs with our upgrades. Upgrade pricing is additional to the cost of the body on page 7. Note: Stock means that the Option is included in the Price of the Body. Cowl Sides Stock Cowl Sides Stock Smooth Cowl Sides N/C Cowl Top Smooth Cowl Top $ Smooth Cowl Top with Cowl Vent Installed $ No Cowl Top Stock Supply Your Own Original Gas Tank N/C Dash 32 Style Dash Installed $ No 32 Style Dash Installed Stock Seat Area and Subframe for AF-100-B Stock Pan Under Seat with Seat Riser, Seat Stock Frame, and Seat Back for Stock Subframe Stock Pan Under Seat with Seat Riser, Seat N/C Frame, and Seat Back for 2 Kickup Subframe N/C Stock Pan Under Seat with Seat Riser, Seat, N/C Frame, Seat Back, and Flat Rumble Floor For Stock Subframe. Stock Pan Under Seat with Seat Riser, Seat, N/C Frame, Seat Back, and Flat Rumble Floor For 2 Kickup Subframe. Flat Hot Rod Style Floor for Stock Subframe N/C Flat Hot Rod Style Floor for 2 Kickup Subframe N/C No Floor Pans N/C Floor Pans Not Installed N/C (Check Seat Area Above) Seat Area and Subframe for AH-100-B Hi-Boy Pan Under Seat with Seat Riser, Seat Frame, Seat Back, and Flat Rumble Floor for Hi-boy Subframe N/C Hi-Boy Pan Under Seat with Flat Floor Pans For Hi-boy Subframe Stock No Floor Pans N/C Floor Pans Not Installed N/C (Check Seat Area Above) Front Floor Stock Wood Front Floor Installed Stock Stock Steel Front Floor Installed $ Recessed Steel Front Floor Installed $ Recessed Steel Front Floor Installed $ Recessed Steel Front Floor Installed $ No Front Floor N/C Firewall Stock Firewall with Holes Installed Stock Stock Firewall without Holes Installed N/C 4 Recessed Firewall Installed N/C 5 Recessed Firewall Installed N/C 6 Recessed Firewall Installed N/C Supply Your Own Firewall N/C Windshield Stanchions Plain Lower Windshield Stanchions Installed $ Bronze Deluxe Height One Piece Stanchions Installed $ No Stanchions Installed Stock Deck Former and Wood Tack Strip Deck Former Installed $ Wood Tack Strip Installed $ Deck Former and Wood Tack Strip Installed $ No Deck Former or Tack Strip Installed N/C 10 Rear Cross Member Stock Rear Cross Member Installed Stock Rear Roll Pan without Lights Installed $ Rear Roll Pan without Lights with Extension Pan Installed $ Rear Roll Pan with Lights Installed $ Rear Roll Pan with Lights with Extension Pan Installed $ Top Irons Tabs Plain Top Iron Tabs Welded In Stock Plain Top Iron Tabs Bolted In N/C Stainless Steel Top Iron Tabs Welded In $50.00 Stainless Steel Top Iron Tabs Bolted In $50.00 No Top Iron Tabs Installed N/C Door Style Stock Doors with Curtain Rod Holes, Door Handle Holes, and Snap Holes with Handle Hole N/C Stock Doors with Curtain Rod Holes, Door Handle Holes, and Snap Holes without Handle Hole N/C Smooth Doors with Handle Hole N/C Smooth Doors without Handle Hole N/C Outside Door Handle Outside Door Handles Installed $ No Outside Door Handles Installed Stock Door Strikers Plain Door Strikers Installed Stock Stainless Steel Door Strikers Installed $30.00 Deck Lid Style Stock Trunk Stock Smooth Trunk N/C Stock Rumble N/C Smooth Rumble N/C Stock Trunk with Hole and Louvers Specify Number of Rows of Louvers $ Stock Trunk without Hole and Louvers $ Specify Number of Rows of Louvers Deck Lid Latch Trunk Latch Installed $ Rumble Latch Installed $ No Deck Lid Latch Installed Stock Deck Lid Handle Deck Lid Handle Installed $80.00 No Deck Lid Handle Installed Stock Deck Lid Catch Plain Trunk Catch Installed Stock Stainless Steel Trunk Catch Installed $25.00 Rumble Catch Installed N/C No Deck Lid Catch Installed N/C Deck Lid Prop Plain Trunk Prop Installed Stock Stainless Steel Trunk Prop Installed $25.00 No Trunk Prop Installed N/C Rumble Grab Handles Rumble Grab Handles Installed $ No Rumble Grab Handles Stock Cowl Light Holes Cowl Light Holes Drilled $ No Cowl Light Holes N/C Crating Crate Body for Shipping $ Tarp and Wrap Body for Show or Shop Pickup $ No Preparation for Shipping N/C

11 Roadster Starter Kits Starter Packages A Starter Package is a great place to start your roadster dream. It includes a body mounted and shimmed to a fully assembled chassis. Then add our finishing components to get it ready to drive in no time! Full Fender Starter Package Starter Package Includes the following: Body for Model A Style Frame. See page 10 for stock options and body upgrades. Model A Style Chassis. See page 38 for stock options and Chassis upgrades. Assembly of the Chassis to the Rolling Chassis Stage. Mounting the Body to the Chassis and Shimming of the body Model A Full Fender Starter Package $15, Hi-Boy Starter Package Starter Package Includes the following: Body for 32 Style Frame. See page 10 for stock options and body upgrades Style (Hi-Boy) Chassis. See page 40 for stock options and Chassis upgrades. Assembly of the Chassis to the Rolling Chassis Stage. Mounting the Body to the Chassis and Shimming of the body Model A Hi-Boy Starter Package $16, Starter Package Upgrade Options Stainless Steel Chassis Package Upgrade: Upgrade the above chassis to our Stock Stainless Steel Chassis Package. See page 38 for what is included. Chassis Upgrade to Stock Stainless Package $2, Add Popular Body and Chassis Options: Add our most popular body and chassis options to a stock body and chassis. These options include a Steel Front Floor, lower stanchions installed, Deck Former installed in the body, Rear Drum Brakes, and Brake Line Kit Installed. This package can only be purchased with a stock body and chassis. Package Upgrade $2, Add Popular Finishing Options: Add our most popular options to help finish your starter kit. All Items are Sent Loose and do not come installed on the starter kit. Includes: A16610B53FF32: Three Piece Hood for or 32 Style Grille Shell B1620PTF: 32 Grille Shell and Insert without Crankhole Fitted to Shell Z-487-1: Walker Radiator Z-Series for Chevy Engine 1002BS: Fender Package SB580C: Mild Steel Tilt Steering Column FR1717DD: 9/16-26x3/4-36 U-Joint FR1790PL: 5/8-36x3/4-36 U-Joint SB598DD18: Plain Double End Splined Shaft 1004-BDWFKC: Deluxe Height Round Chrome Windshield Kit Package Upgrade $6, Installation of Finishing Options: Includes the labor for the Installation of all the above components. Labor Charge $15, Starter Package Upgrade Options Stainless Steel Chassis Package Upgrade: Upgrade the above chassis to our Stock Stainless Steel Chassis Package. See page 40 for what is included. Chassis Upgrade to Stock Stainless Package $1, Add Popular Body and Chassis Options: Add our most popular body and chassis options to a stock body and chassis. These options include a Steel Front Floor, Lower Stanchions Installed, Deck Former installed in the body, Rear Drum Brakes, and Brake Line Kit Installed. This package can only be purchased with a stock body and chassis. Package Upgrade $2, Add Popular Finishing Options: Add our most popular options to help finish your starter kit. All Items are Sent Loose and do not come installed on the starter kit. Includes: A16610B53HB32: Three Piece Hood for or 32 Style Grille Shell B1620PTF: 32 Grille Shell and Insert without Crankhole Fitted to Shell Z-487-1: Walker Radiator Z-Series for Chevy Engine SB580C: Mild Steel Tilt Steering Column FR1717DD: 9/16-26x3/4-36 U-Joint FR1790PL: 5/8-36x3/4-36 U-Joint SB598DD18: Plain Double End Splined Shaft 1004-BDWFKC: Deluxe Height Round Chrome Windshield Kit Package Upgrade $4, Installation of Finishing Options: Includes the labor for the Installation of all the above components. Labor Charge $12, Finishing Touches We offer a wide variety of products to get your body into a finished car. Finishing Touches start on page 50. Please Note: Primer is for illustrative use only. Bodies and sheet metal components do not come primered. CustomerService@BrookvilleRoadster.com

12 Roadster Pickup Option Guide Choose your Roadster Pickup Body on Page 7. Use this page to view what comes standard on a body then you may customize the body to meet your needs with our upgrades. Upgrade pricing is additional to the cost of the body on page 7. Note: Stock means that the Option is included in the Price of the Body. Cowl Top Smooth Cowl Top with Smooth Upper Firewall $ Smooth Cowl Top with Ribbed Upper Firewall $ Smooth Cowl Top with Smooth Upper Firewall and Cowl Vent Installed $ Smooth Cowl Top with Ribbed Upper Firewall and Cowl Vent Installed $ No Cowl Top Stock Supply Your Own Original Gas Tank N/C Dash 32 Style Dash Installed $ No 32 Style Dash Stock Seat Area and Subframe Stock Pan under Seat with Seat Stock Frame, and Seat Back for Stock Subframe Flat Hot Rod Style Floor for Stock Subframe N/C No Floor Pans N/C Floor Pans Not Installed N/C (Check Seat Area Above) Front Floor Stock Wood Front Floor Installed Stock Stock Steel Front Floor Installed $ Recessed Steel Front Floor Installed $ Recessed Steel Front Floor Installed $ Recessed Steel Front Floor Installed $ No Front Floor N/C Wood Tack Strip Wood Tack Strip Installed Stock Wood Tack Strip Not Installed N/C Firewall Stock Firewall with Holes Installed Stock Stock Firewall without Holes Installed N/C 4 Recessed Firewall Installed N/C 5 Recessed Firewall Installed N/C 6 Recessed Firewall Installed N/C Supply Your Own Firewall Installed N/C Windshield Stanchions Plain Stock Height Windshield Stanchions Installed $ Plain 2 Chopped Windshield Stanchions Installed $ Stainless Steel Stock Height Windshield Stanchions Installed $ Stainless Steel 2 Chopped Windshield Stanchions Installed $ No Stanchions Stock Top Irons Tabs Plain Top Iron Tabs Welded In Stock Stainless Steel Top Iron Tabs Welded In $50.00 No Top Iron Tabs N/C Door Style 28 Style Doors with Curtain Rod and Snap Holes N/C 29 Style Doors with Curtain Rod Holes, Door Handle Holes, and Snap Holes N/C Smooth Doors N/C Outside Door Handle Outside Door Handles Installed $ No Outside Door Handles Installed Stock Door Strikers Plain Door Strikers Installed Stock Stainless Steel Door Strikers Installed $30.00 Cowl Light Holes Cowl Light Holes Drilled $ No Cowl Light Holes N/C Crating Crate Body for Shipping $ Tarp and Shrink Wrap Body for Show or Shop Pickup $ No Preparation for Shipping N/C

13 Roadster Pickup Starter Kit Roadster Pickup Starter Packages A Starter Package is a great place to start your roadster dream. It includes a cab and bed mounted and shimmed to a fully assembled chassis. Then add our finishing components to get it ready to drive in no time! Stock Cab Starter Package Starter Package Includes the following: Stock Length Pickup Body. See page 12 for stock options and body upgrades. Model A Assembled Stock Bed. See Page 29 for stock options and bed upgrades. Stock Tailgate with Chains and Hooks with Ford Script. Model A Style Chassis. See page 38 for stock options and Chassis upgrades. Assembly of the Chassis to the Rolling Chassis Stage. Mounting the Body to the Chassis and Shimming of the body Stock Cab Starter Package $14, Starter Package Upgrade Options Stainless Steel Chassis Package Upgrade: Upgrade the above chassis to our Stock Stainless Steel Chassis Package. See page 38 for what is included. Chassis Upgrade to Stock Stainless Package $2, Stainless Steel Bed Upgrade: Upgrade your bed to include stainless steel bed strips, center pan, and polished stainless steel bed bolts. Stainless Steel Bed Upgrade $ Hidden Latch Tailgate Upgrade: For those who don t like the original style tailgate with hooks and chains, this gives a more clean appearance. Hidden Hinge Upgrade $ Add Popular Body and Chassis Options: Add our most popular body and chassis options to a stock body and chassis. These options include a Steel Front Floor, Rear Drum Brakes, and Brake Line Kit Installed. This package can only be purchased with a stock body and chassis. Package Upgrade $1, Add Popular Finishing Options: Add our most popular options to help finish your starter kit. All Items are Sent Loose and do not come installed on the starter kit. Includes: A16610A53FF32: Three Piece Hood for 32 Style Grille Shell B1620PTF: Grille Shell and Insert without Crankhole Fitted to Shell Z-487-1: Walker Radiator Z-Series for Chevy Engine 1002AS: Fender Package SB580C: Mild Steel Tilt Steering Column FR1717DD: 9/16-26x3/4-36 U-Joint FR1790PL: 5/8-36x3/4-36 U-Joint SB598DD18: Plain Double End Splined Shaft 1003-ACHWFKC2: 2 Chopped Chrome Windshield Kit Package Upgrade $6, Installation of Finishing Options: Includes the labor for the Installation of all the above components. Labor Charge $15, Extended Cab Starter Package Starter Package Includes the following: Extended Cab Pickup Body. See page 12 for stock options and body upgrades. Model A Assembled Short Bed. See Page 29 for stock options and bed upgrades. Stock Tailgate with Chains and Hooks with Ford Script. Model A Style Chassis. See page 40 for stock options and Chassis upgrades. Assembly of the Chassis to the Rolling Chassis Stage. Mounting the Body to the Chassis and Shimming of the body Extended Cab Starter Package $15, Starter Package Upgrade Options Hi-Boy Upgrade: Add a Hi-boy Chassis and bed for a fenderless look. See page 40 for Hi-Boy Style Chassis and Page 29 for the Bed. Hi-boy Upgrade $1, Stainless Steel Chassis Package Upgrade: Upgrade the above chassis to our Stock Stainless Steel Chassis Package. See page 40 for what is included. Chassis Upgrade to Stock Stainless Package $2, (for Model A Style Chassis Chassis Upgrade to Stock Stainless Package $1, (If Hi-Boy Upgrade) Stainless Steel Bed Upgrade: Upgrade your bed to include stainless steel bed strips, center pan, and polished stainless steel bed bolts. Stainless Steel Bed Upgrade $ Hidden Latch Tailgate Upgrade: For those who don t like the original style tailgate with hooks and chains, this gives a more clean appearance Hidden Hinge Upgrade $ Add Popular Body and Chassis Options: Add our most popular body and chassis options to a stock body and chassis. These options include a Steel Front Floor, Rear Drum Brakes, and Brake Lines kit installed. This package can only be purchased with a stock body and chassis. Package Upgrade $1, Add Popular Finishing Options: Add our most popular options to help finish your starter kit. All Items are Sent Loose and do not come installed on the starter kit. Includes: A16610A53FF32: Three Piece Hood for 32 Style Grille Shell B1620PTF: Grille Shell and Insert without Crankhole Fitted to Shell Z-487-1: Walker Radiator Z-Series for Chevy Engine SB580C: Mild Steel Tilt Steering Column FR1717DD: 9/16-26x3/4-36 U-Joint FR1790PL: 5/8-36x3/4-36 U-Joint SB598DD18: Plain Double End Splined Shaft 1003-ACHWFKC2: 2 Chopped Chrome Windshield Kit Package Upgrade $4, Installation of Finishing Options: Includes the labor for the Installation of all the above components. Labor Charge $12, Finishing Touches We offer a wide variety of products to get your body into a finished car. Finishing Touches start on page 50. Please Note: Primer is for illustrative use only. Bodies and sheet metal components do not come primered. CustomerService@BrookvilleRoadster.com

14 Roadster Pickup Option Guide Choose your Roadster Pickup Body on Page 7. Use this page to view what comes standard on a body then you may customize the body to meet your needs with our upgrades. Upgrade pricing is additional to the cost of the body on page 7. Note: Stock means that the Option is included in the Price of the Body. Cowl Sides Stock Cowl Sides Stock Smooth Cowl Sides N/C Cowl Top Smooth Cowl Top $ Smooth Cowl Top with Cowl Vent Installed $ No Cowl Top Stock Supply Your Own Original Gas Tank N/C Dash 32 Style Dash Installed $ No 32 Style Dash Installed Stock Seat Area and Subframe Stock Pan Under Seat, Stock Seat Frame, and Wood Seat Back for Stock Subframe Stock Flat Hot Rod Style Floor for Stock Subframe N/C No Floor Pans N/C Floor Pans Not Installed N/C (Check Seat Area Above) Front Floor Stock Wood Front Floor Installed Stock Stock Steel Front Floor Installed $ Recessed Steel Front Floor Installed $ Recessed Steel Front Floor Installed $ Recessed Steel Front Floor Installed $ No Front Floor N/C Firewall Stock Firewall with Holes Installed Stock Stock Firewall without Holes Installed N/C 4 Recessed Firewall Installed N/C 5 Recessed Firewall Installed N/C 6 Recessed Firewall Installed N/C Supply Your Own Firewall N/C Windshield Stanchions Plain Lower Windshield Stanchions Installed $ Bronze Deluxe Height One Piece Stanchions Installed $ No Stanchions Installed Stock Deck Former and Tack Strip Deck Former Installed $ No Deck Former Installed N/C Top Irons Tabs Plain Top Iron Tabs Welded In Installed Stock Plain Top Iron Tabs Bolted In Installed N/C Stainless Steel Top Iron Tabs Welded In Installed $50.00 Stainless Steel Top Iron Tabs Bolted In Installed $50.00 No Top Iron Tabs Installed N/C Door Style Stock Doors with Curtain Rod Holes, Door Handle Holes, and Snap Holes N/C Stock Doors with Curtain Rod Holes and Snap Holes without Door Handle Hole N/C Smooth Doors with Handle Hole N/C Smooth Doors without Handle Hole N/C Outside Door Handle Outside Door Handles Installed $ No Outside Door Handles Installed Stock Door Strikers Plain Door Strikers Installed Stock Stainless Steel Door Strikers Installed Cowl Light Holes Cowl Light Holes Drilled $ No Cowl Light Holes N/C Crating Crate Body for Shipping $ Tarp and Wrap Body for Show or Shop Pickup $ No Preparation for Shipping N/C 14 Please Note: Primer is for illustrative use only. Bodies and sheet metal components do not come primered

15 Roadster Pickup Starter Kit Roadster Pickup Starter Packages A Starter Package is a great place to start your roadster dream. It includes a cab and bed mounted and shimmed to a fully assembled chassis. Then add our finishing components to get it ready to drive in no time! Stock Cab Starter Package Starter Package Includes the following: Stock Length Pickup Body. See page 14 for stock options and body upgrades. Model A Assembled Stock Bed. See Page 29 for stock options and bed upgrades. Stock Tailgate with Chains and Hooks with Ford Script. Model A Style Chassis. See page 38 for stock options and Chassis upgrades. Assembly of the Chassis to the Rolling Chassis Stage. Mounting the Body to the Chassis and Shimming of the body Extended Cab Starter Package Starter Package Includes the following: Extended Pickup Body. See page 14 for stock options and body upgrades. Model A Assembled Extended Cab Bed. See Page 29 for stock options and bed upgrades. Stock Tailgate with Chains and Hooks with Ford Script. Model A Style Chassis. See page 38 for stock options and Chassis upgrades. Assembly of the Chassis to the Rolling Chassis Stage. Mounting the Body to the Chassis and Shimming of the body Stock Cab Starter Package $14, Starter Package Upgrade Options Starter Package Upgrade Options Stainless Steel Chassis Package Upgrade: Upgrade the above chassis Hi-Boy Upgrade: Add a Hi-boy Chassis and bed for a fenderless look. to our Stock Stainless Steel Chassis Package. See page 38 for what is Hi-boy Upgrade $1, included. Chassis Upgrade to Stock Stainless Package $2, Stainless Steel Bed Upgrade: Upgrade your bed to include stainless steel bed strips, center pan, and polished stainless steel bed bolts. Stainless Steel Bed Upgrade $ Hidden Latch Tailgate Upgrade: For those who don t like the original style tailgate with hooks and chains, this gives a more clean appearance Hidden Hinge Upgrade $ Extended Cab Starter Package $15, Stainless Steel Chassis Package Upgrade: Upgrade the above chassis to our Stock Stainless Steel Chassis Package. See page 38 for what is included. Chassis Upgrade to Stock Stainless Package $2, (for Model A Style Chassis Chassis Upgrade to Stock Stainless Package $1, (If Hi-Boy Upgrade is selected above) Stainless Steel Bed Upgrade: Upgrade your bed to include stainless steel bed strips, center pan, and polished stainless steel bed bolts. Add Popular Body and Chassis Options: Add our most popular body Stainless Steel Bed Upgrade $ and chassis options to a stock body and chassis. These options include a Hidden Latch Tailgate Upgrade: For those who don t like the original Steel Front Floor, Lower Stanchions Installed, Deck Former installed in style tailgate with hooks and chains, this gives a more clean appearance the body, Rear Drum Brakes, and Brake Line Kit Installed. This package Hidden Hinge Upgrade $ can only be purchased with a stock body and chassis. Package Upgrade $2, Add Popular Body and Chassis Options: Add our most popular body and chassis options to a stock body and chassis. These options include a Add Popular Finishing Options: Add our most popular options to help finish your starter kit. All Items are Sent Loose and do not come installed on the starter kit. Includes: A16610B53FF32: Three Piece Hood for or 32 Style Grille Shell B1620PTF: 32 Grille Shell and Insert without Crankhole Fitted to Shell Z-487-1: Walker Radiator Z-Series for Chevy Engine 1002BS: Fender Package SB580C: Mild Steel Tilt Steering Column FR1717DD: 9/16-26x3/4-36 U-Joint FR1790PL: 5/8-36x3/4-36 U-Joint SB598DD18: Plain Double End Splined Shaft 1004-BDWFKC: Deluxe Height Round Chrome Windshield Kit Package Upgrade $6, Installation of Finishing Options: Includes the labor for the Installation of all the above components. Labor Charge $15, Steel Front Floor, Lower Stanchions Installed, Deck Former installed in the body, Rear Drum Brakes, and Brake Line Kit Installed. This package can only be purchased with a stock body and chassis. Package Upgrade $2, Add Popular Finishing Options: Add our most popular options to help finish your starter kit. All Items are Sent Loose and do not come installed on the starter kit. Includes: A16610B53FF32: Three Piece Hood for or 32 Style Grille Shell B1620PTF: 32 Grille Shell and Insert without Crankhole Fitted to Shell Z-487-1: Walker Radiator Z-Series for Chevy Engine SB580C: Mild Steel Tilt Steering Column FR1717DD: 9/16-26x3/4-36 U-Joint FR1790PL: 5/8-36x3/4-36 U-Joint SB598DD18: Plain Double End Splined Shaft 1004-BDWFKC: Deluxe Height Round Chrome Windshield Kit Package Upgrade $4, Installation of Finishing Options: Includes the labor for the Installation of all the above components. Labor Charge $12, Finishing Touches We offer a wide variety of products to get your body into a finished car. Finishing Touches start on page 50. Please Note: Primer is for illustrative use only. Bodies and sheet metal components do not come primered. CustomerService@BrookvilleRoadster.com

16 All Steel 1932 Ford Roadster The Most Accurate Reproduction Ever Made The Brookville All Steel Deuce is the most accurate reproduction body you can buy. As with all Brookville bodies, we use the same gauge steel as the originals and every panel and part of this body is interchangeable with the originals. Our 32 roadsters have been built by many top builders for owners from rock stars to everyday car guys. The car below shows one of our 32 Ford roadsters in progress at SoCal Speed Shop. These photos show the attention to detail and finish we engineer into all of our steel bodies. This particular car does have some minor changes made by the SoCal crew for their customer and features some products not included in the basic roadster body and chassis kits and is for illustration purposes only

17 1932 Roadster Body B-100 Stock Roadster Body $11, B-100-ORIGINAL Roadster Body with Original Style Quarter Panels, $13, Wood Tack Strip, and Stock Floors B-100-LB Roadster Body Modified for Lakester Style Frame $17, B-100-UN Unassembled Stock Roadster Body $9, All Steel 1932 Ford Roadster Below are the 1932 Roadster and Roadster Pickup Bodies available. Over the next several pages you can see what is included with each body and what upgrade options are available. All Assembled 32 Bodies Require a $2, Nonrefundable Deposit NSRA Best 1932 Roadster Truck Body New Product! NOTE: This is a custom design and not an exact reproduction of the original 1932 Ford roadster pickup cab. The age old problem with early Ford trucks is leg room. Now you can enjoy the same comfort and spaciousnesses that the roadster offers with our custom extended cab pickup. Our All Steel body is not an exact reproduction; though we believe that this cab is more attractive than the originals. We offer a complete shortened pickup bed to go along with this exclusive body as well. B-100-T Extended Cab Roadster Pickup Cab $8, B-100-TUN Unassembled Extended Cab Roadster Pickup $6, All Assembled 32 Pickup Bodies Require a $1, Nonrefundable Deposit Door and Floor Options For Stock 32 Bodies Please Note: Primer is for illustrative use only. Bodies and sheet metal components do not come primered. 32 Roadster Body with Stock Doors, Curtain Rod Hole, Stock Hinges with Bead Around Hinge, and without Handle Hole. 32 Roadster Body with Smooth Doors and Stock Hinges with Bead Around Hinge. 32 Roadster Body with Smooth Doors and Hidden Hinges. Please Note: Primer is for illustrative use only. Bodies and sheet metal components do not come primered. 32 Roadster Body with Stock Floor under Seat, Seat Riser, Seat Frame, and Package Tray. Not available on pickup. 32 Roadster Body with Flat Pan Under Seat, Flat Floor, and Deck Former. CustomerService@BrookvilleRoadster.com

18 1932 Ford Roadster Option Guide Choose your 1932 Roadster Body on Page 17. Use this page to view what comes standard on a 32 Roadster body then you may customize the body to meet your needs with our upgrades. Upgrade pricing is additional to the cost of the body on page 17. Note: Stock means that the Option is included in the Price of the Body. 18 Cowl Top Smooth Cowl Top Stock Cowl Top with Vent $ Dash Smooth Roadster Dash Installed Stock Smooth Dash with Glove Box Door Installed $ Stock Dash with Oval Recess and Glove Box Door Installed $ Stock Dash with Oval Recess Installed $ Smooth Dash with 5 Gauge Oval Cutout Installed $60.00 Smooth Dash with 6 Gauge Oval Cutout Installed $60.00 No Dash -$ Glove Box Long Glove Box Installed $ Short Glove Box Installed $ No Glove Box Stock Seat Area Stock Pan Under Seat with Seat Frame, Seat Riser, Upholstery Channels, and Package Tray Installed Stock Flat Hot Rod Style Floor N/C Flat Floor Under Seat with Seat Frame, Seat Riser, Upholstery Channels, and Package Tray Installed N/C Floor Pans Sent Loose N/C No Floor Pans N/C Front Floor Not Installed sent Loose with the Body Stock Wood Front Floor $ Steel Front Floor for Flat Firewall $ Steel Front Floor for Stock Firewall $ No Front Floor Stock Firewall Not Installed sent Loose with the Body Flat Firewall Kit $ Stock Firewall Kit $ No Firewall Stock Lower Windshield Stanchions Brookville Bronze Lower Stanchions Installed $ Chrome Lower Stanchions Installed $ Wanless Windshield Kit Installed $ Brookville Bronze Lower Stanchion Holes Drilled Only $50.00 Vintique Lower Stanchion Holes Drilled Only $50.00 No Stanchions Stock Deck Former Deck Former Installed $ Wood Tack Strip Installed $ Deck Former and Wood Tack Strip Installed $ No Deck Former Installed N/C No Wood Tack Strip Installed N/C Top Irons Tabs Plain Top Iron Tabs Welded In Installed Stock Plain Top Iron Tabs Bolted In Installed N/C Stainless Steel Top Iron Tabs Welded In Installed $50.00 Stainless Steel Top Iron Tabs Bolted In Installed $50.00 No Top Iron Tabs Installed N/C Door Style Stock Doors with Curtain Rod Hole, Bead around Hinge, and Handle Hole Stock Stock Doors with Curtain Rod Hole and Handle Hole without Bead around Hinge, N/C Smooth Doors with Bead around Hinge with Handle Holes N/C Smooth Doors without Bead around Hinge with Handle Holes N/C Stock Doors with Curtain Rod Hole and Bead around Hinge without Handle Hole N/C Stock Doors with Curtain Rod Hole without Bead around Hinge and without Handle Holes N/C Smooth Doors with Bead around Hinge without Handle Holes N/C Smooth Doors without Bead around Hinge without Handle Holes N/C Smooth Hidden Hinge Doors $ Outside Door Handle Outside Door Handles Installed $ No Outside Door Handles Installed Stock Door Strikers Plain Door Strikers Installed Stock Stainless Steel Door Strikers Installed $30.00 Deck Lid Style Stock Trunk Stock Smooth Trunk N/C Stock Rumble N/C Smooth Rumble N/C Stock Trunk with Hole with 5 Rows of Louvers $ Stock Trunk with Hole with 6 Rows of Louvers $ Stock Trunk with Hole with 7 Rows of Louvers $ Stock Trunk without Hole with 5 Rows of Louvers $ Stock Trunk without Hole with 6 Rows of Louvers $ Stock Trunk without Hole with 7 Rows of Louvers $ Deck Lid Latch Trunk Latch Installed $ Rumble Latch Installed $ No Deck Lid Latch Installed Stock Deck Lid Handle Deck Lid Handle Installed $80.00 No Deck Lid Handle Installed Stock Deck Lid Catch Plain Trunk Catch Installed Stock Stainless Steel Trunk Catch Installed\ $25.00 Rumble Catch Installed N/C No Deck Lid Catch Installed N/C Deck Lid Prop Plain Trunk Prop Installed Stock Stainless Steel Trunk Prop Installed $25.00 No Trunk Prop Installed N/C Trunk Drains Stainless Steel Trunk Drains Installed $ No Trunk Drains Installed Stock Rumble Grab Handles Rumble Grab Handles Installed $ No Rumble Grab Handles Stock Cowl Light Holes Cowl Light Holes Drilled $ No Cowl Light Holes N/C Crating Crate Body for Shipping $ Tarp and Wrap Body for Show or Shop Pickup $ No Preparation for Shipping N/C

19 1932 Roadster Starter Package 1932 Ford Roadster Starter Kit A 32 Starter Package is a great place to start your roadster dream. It includes a body mounted and shimmed to a fully assembled chassis and Firewall Installed. Then add our finishing components to get it ready to drive in no time! 32 Roadster Starter Package Starter Package Includes the following: 32 Body. See page 18 for stock options and body upgrades. 32 Chassis. See page 42 for stock options and Chassis upgrades. Assembly of the Chassis to the Rolling Chassis Stage. Mounting the Body to the Chassis and Shimming of the body for Proper Fit. Includes Installation of the Firewall. 32 Roadster Starter Package $21, Please Note: Primer is for illustrative use only. Bodies and sheet metal components do not come primered. Starter Package Upgrade Options Original Style Body Upgrade: Upgrade the body to include Body with Original Style Quarter Panels,Wood Tack Strip, and Stock Floor. (This Option cannot be Combined with the Lakester Body Upgrade.) Orignal Style Body Upgrade $1, Lakester Package Upgrade: Upgrade the body and chassis to our Lakester Package. Designed to sit lower for a perfect hot rod stance. Lakester Package Upgrade $8, Stainless Steel Chassis Package Upgrade: Upgrade the above chassis to our Stock Stainless Steel Chassis Package. See page 42 for what is included. Chassis Upgrade to Stock Stainless Package $1, Add Popular Body and Chassis Options: Add our most popular body and chassis options to a stock body and chassis. These options include a Steel Front Floor, Deck Former installed in the body, Lower Stanchions, Rear Drum Brakes, and Brake Line Kit Installed. This package can only be purchased with a stock body and chassis. Package Upgrade $2, Add Popular Finishing Options: Add our most popular options to help finish your starter kit. All Items are Sent Loose and do not come installed on the starter kit. Includes: B : 32 Three Piece Dual Latching Hood B1620PTF: 32 Grille Shell and Insert without Crankhole Fitted to Shell Z-491-2: Walker Radiator Z-Series for Chevy Engine B-1002: 32 Fender Package* B-180-BAR: 32 Dropped Headlight Bar* B-180-BB: 32 Headlight Bar Bolt Kit* B-180-SC: Braided Stainless Steel Headlight Wire Conduit* B-180-TS: 32 Stainless Steel Headlights with Turn Signals* SB580C: Mild Steel Tilt Steering Column FR1717DD: 9/16-26x3/4-36 U-Joint FR1790PL: 5/8-36x3/4-36 U-Joint SB598DD18: Plain Double End Splined Shaft B-1003-WSFKC2: 2 Chopped Chrome Windshield Kit B-008-SS: Stainless Steel Bumper Set *Not Included in Hi-Boy Look Package Package Upgrade for Full Fendered Look $8, Package Upgrade for Hi-Boy Look $5, Installation of Finishing Options: Includes the labor for the Installation of all the above components. Labor Charge $15, Finishing Touches We offer a wide variety of products to get your body into a finished car. Finishing Touches start on page 50. Because of the volatility of raw materials and metals we reserve the right to adjust pricing if necessary. CustomerService@BrookvilleRoadster.com

20 1932 Ford Roadster Pickup Option Guide Choose your 1932 Roadster Pickup Body on Page 17. Use this page to view what comes standard on a 32 Roadster body then you may customize the body to meet your needs with our upgrades. Upgrade pricing is additional to the cost of the body on page 17. Note: Stock means that the Option is included in the Price of the Body. Cowl Top Smooth Cowl Top Stock Cowl Top with Vent $ Dash Smooth Roadster Dash Installed Stock Smooth Dash with Glove Box Door Installed $ Stock Dash with Oval Recess and Glove Box Door Installed $ Stock Dash with Oval Recess Installed $ Smooth Dash with 5 Gauge Oval Cutout Installed $60.00 Smooth Dash with 6 Gauge Oval Cutout Installed $60.00 No Dash -$ Glove Box Long Glove Box Installed $ Short Glove Box Installed $ No Glove Box Stock Seat Area Flat Hot Rod Style Floor Stock Floor Pans Sent Loose N/C No Floor Pans N/C Front Floor Not Installed sent Loose with the Body Stock Wood Front Floor $ Steel Front Floor for Flat Firewall $ Steel Front Floor for Stock Firewall $ No Front Floor Stock Firewall Not Installed sent Loose with the Body Flat Firewall Kit $ Stock Firewall Kit $ No Firewall Stock Lower Windshield Stanchions Brookville Bronze Lower Stanchions Installed $ Chrome Lower Stanchions Installed $ Wanless Windshield Kit Installed $ Brookville Bronze Lower Stanchion Holes Drilled Only $50.00 Vintique Lower Stanchion Holes Drilled Only $50.00 No Stanchions Stock Deck Former Deck Former Installed $ No Deck Former Installed N/C Top Irons Tabs Plain Top Iron Tabs Welded In Installed Stock Plain Top Iron Tabs Bolted In Installed N/C Stainless Steel Top Iron Tabs Welded In Installed $50.00 Stainless Steel Top Iron Tabs Bolted In Installed $50.00 No Top Iron Tabs Installed N/C Door Style Stock Doors with Curtain Rod Hole, Bead around Hinge, and Handle Hole Stock Stock Doors with Curtain Rod Hole and Handle Hole without Bead around Hinge, N/C Smooth Doors with Bead around Hinge with Handle Holes N/C Smooth Doors without Bead around Hinge with Handle Holes N/C Stock Doors with Curtain Rod Hole and Bead around Hinge without Handle Hole N/C Stock Doors with Curtain Rod Hole without Bead around Hinge and without Handle Holes N/C Smooth Doors with Bead around Hinge without Handle Holes N/C Smooth Doors without Bead around Hinge without Handle Holes N/C Smooth Hidden Hinge Doors $ Outside Door Handle Outside Door Handles Installed $ No Outside Door Handles Installed Stock Door Strikers Plain Door Strikers Installed Stock Stainless Steel Door Strikers Installed $30.00 Cowl Light Holes Cowl Light Holes Drilled $ No Cowl Light Holes N/C Crating Crate Body for Shipping $ Tarp and Wrap Body for Show or Shop Pickup $ No Preparation for Shipping N/C 32 Extended Cab Starter Package A 32 Starter Package is a great place to start your roadster dream. It includes a cab and bed mounted and shimmed to a fully assembled chassis. Then add our finishing components to get it ready to drive in no time! Starter Package Includes the following: 32 Extended Length Pickup Body. See above for stock options and body upgrades. 32 Assembled Bed. See Page 30 for stock options and bed upgrades. Tailgate with Hidden Hinge and Ford Script. 32 Chassis. See page 42 for stock options and Chassis upgrades. Assembly of the Chassis to the Rolling Chassis Stage. Mounting the Body to the Chassis and Shimming of the body. Firewall Installed in the Cab 32 Extended Cab Starter Package $21,

21 1932 Three Window Coupe 32 Extended Cab Starter Package (Continued) Starter Package Upgrade Options Lakester Package Upgrade: Upgrade the body, bed, and chassis to our Lakester Package. Designed to sit lower for a perfect hot rod stance. Lakester Package Upgrade $4, Stainless Steel Chassis Package Upgrade: Upgrade the above chassis to our Stock Stainless Steel Chassis Package. See page 42 for what is included. Chassis Upgrade to Stock Stainless Package $1, Add Popular Body and Chassis Options: Add our most popular body and chassis options to a stock body and chassis. These options include a Steel Front Floor, Firewall, Lower Stanchions, Econo Disc Brakes, and Brake Lines Installed. This package can only be purchased with a stock body and chassis. Package Upgrade $2, Add Popular Finishing Options: Add our most popular options to help finish your starter kit. All Items are Sent Loose and do not come installed on the starter kit. Includes: B : Three Piece Dual Latching Hood B1620PTF: Grille Shell and Insert without Crankhole Fitted to Shell Z-491-2: Walker Radiator Z-Series for Chevy Engine B-1002: 32 Fender Package* B-180-BAR: 32 Dropped Headlight Bar* B-180-BB: 32 Headlight Bar Bolt Kit* B-180-SC: Braided Stainless Steel Headlight Wire Conduit* B-180-TS: 32 Stainless Steel Headlights with Turn Signals* SB580C: Mild Steel Tilt Steering Column FR1717DD: 9/16-26x3/4-36 U-Joint FR1790PL: 5/8-36x3/4-36 U-Joint SB598DD18: Plain Double End Splined Shaft B-1003-WSFKC2: 2 Chopped Chrome Windshield Kit B-008-SS: Stainless Steel Bumper Set *Not Included in Hi-Boy Look Package Package Upgrade for Full Fendered Look $8, Package Upgrade for Hi-Boy Look $5, Installation of Finishing Options: Includes the labor for the Installation of all the above components. Labor Charge $15, Finishing Touches We offer a wide variety of products to get your body into a finished car. Finishing Touches start on page 50. Leading Edge Technology Meets Classic Styling The All Steel 32 Three Window has been our most ambitious project to date. Using the most sophisticated engineering and digital measuring methods, we have been able to create a truly accurate yet more precise reproduction of this classic body. Our Three Window features the same gauge metals, the stamping details, internal bracing and wood components found in the originals. Our car does benefit from modern welding and finishing techniques and from our exclusive one piece whole body-side stamping. Even so, every panel from this new body is still interchangeable with the factory original. If you have always wanted a Little Deuce Coupe, this is the one you ve been waiting for. We are proud of the final results of the many years of research and development on this project. The car shown below is our own demonstrator photographed by The Rodder s Journal. This car has made numerous tours and trips wearing nothing more than a clear coat to show off the beautiful steel lines. CustomerService@BrookvilleRoadster.com

22 1932 Three Window Coupe Option Guide Three Window Coupe Body The Award Winning Three Window body comes completely assembled. The doors, decklid, dash, rear floor, body wood, garnish moldings, and bracing are all installed. Complete windshield and glass packages are available. B-200 Stock Height Three Window Coupe $25, B-200-CH Chopped Three Window Coupe $32, B-200-LB Stock Height Three Window Coupe Modified for Lakester Frame $31, B-200-LBCH Chopped Three Window Coupe Modified for Lakester Frame $38, B-200-UN Unassembled Three Window Coupe $23, All Assembled 32 Coupes Bodies Require a $ Nonrefundable Deposit Three Window Coupe Body Option Guide 2005 SEMA Best New Product Award! 2006 National Street Rod Association Best New Product Award! 2006 Goodguys Rod & Custom Association Best New Product Award! 2006 Hot Rod & Restoration Show Best New Products Award! Choose your 1932 Coupe Body from above. Use the sheet below to view what comes standard on a 32 Coupe body then you may customize the body to meet your needs with our upgrades. Upgrade pricing is additional to the cost of the body above. Note: Stock means that the Option is included in the Price of the Body. Cowl Top Smooth Cowl Top Stock Cowl Top with Vent $ Dash Smooth Three Window Dash Stock Stock Dash with Oval Recess and Glove Box Door Installed $ No Dash N/C Glove Box Installed Long Glove Box $ Short Glove Box $ No Glove Box Stock Seat Area Stock Floor Pan Under Seat with Flat Floor $ Flat Pan Under Seat with Flat Floor Stock No Floor Pans N/C Front Floor Stock Wood Front Floor Not Installed $ Steel Front Floor for Flat Firewall Not Installed $ Steel Front Floor for Stock Firewall Not Installed $ No Front Floor Stock Firewall Flat Firewall Kit Not Installed $ Stock Firewall Kit Not Installed $ No Firewall Stock Windshield Package Plain Windshield Package Installed $ Chrome Windshield Package Installed $ Chopped Plain Windshield Package Installed $ Chopped Chrome Windshield Package Installed $1, No Windshield Package Installed Stock Roof Insert Wood Roof Insert Installed Stock Filled Roof with Wood Insert Installed $1, Door Style Stock Doors with Handle Holes Stock Stock Doors without Handle Holes N/C Outside Door Handle Locking Outside Door Handles Installed $ Non-Locking Outside Door Handles Installed $ No Outside Door Handles Installed Stock Suicide Safety Kit Suicide Safety Kit Installed $ No Suicide Safety Kit Installed Stock Deck Lid Style Stock Trunk Stock Smooth Trunk N/C Stock Rumble $ Smooth Rumble $ Stock Trunk with Hole with 5 Rows of Louvers $ Stock Trunk with Hole with 6 Rows of Louvers $ Stock Trunk with Hole with 7 Rows of Louvers $ Stock Trunk without Hole with 5 Rows of Louvers $ Stock Trunk without Hole with 6 Rows of Louvers $ Stock Trunk without Hole with 7 Rows of Louvers $ Deck Lid Latch Trunk Latch Installed $ Rumble Latch Installed $ No Deck Lid Latch Installed N/C Deck Lid Handle Deck Lid Handle Installed $80.00 No Deck Lid Handle Installed Stock Deck Lid Catch Plain Trunk Catch Installed Stock Stainless Steel Trunk Catch Installed $25.00 Rumble Catch Installed N/C No Deck Lid Catch Installed N/C Deck Lid Prop Plain Trunk Prop Installed Stock Stainless Steel Trunk Prop Installed $25.00 No Trunk Prop Installed N/C Trunk Drains Stainless Steel Trunk Drains Installed $ No Trunk Drains Installed Stock Cowl Light Holes Cowl Light Holes Drilled $ No Cowl Light Holes N/C Crating Crate Body for Shipping $ Tarp and Shrink Wrap Body for Show or Shop Pickup $ No Shipping N/C

23 1932 Three Window Coupe Starter Kit A 32 Coupe Starter Package is a great place to start your dream. It includes a body shimmed to a fully assembled chassis and Firewall Installed. Then add our finishing components to get it ready to drive in no time! 32 3 Window Coupe Starter Package Starter Package Includes the following: 32 Coupe Body. See page 22 for stock options and body upgrades. 32 Chassis. See page 42 for stock options and Chassis upgrades. Assembly of the Chassis to the Rolling Chassis Stage. Mounting the Body to the Chassis and Shimming of the body. Includes Installation of the Firewall. 32 Coupe Starter Package $34, Starter Package Upgrade Options Chopped Coupe Upgrade: Upgrade to the chopped 32 Coupe body. Chopped Coupe Upgrade $7, Lakester Package Upgrade: Upgrade the body and chassis to our Lakester Package. Designed to sit lower for a perfect hot rod stance. Lakester Package Upgrade $8, Stainless Steel Chassis Package Upgrade: Upgrade the above chassis to our Stock Stainless Steel Chassis Package. See page 42 for what is included. Chassis Upgrade to Stock Stainless Package $1, Add Popular Body and Chassis Options: Add our most popular body and chassis options to a stock body and chassis. These options include a Cowl Vent, Stock Style Dash, Steel Front Floor, Plain Windshield Package, Rear Drum Brakes, and Brake Line Kit Installed. This package can only be purchased with a stock body and chassis. Package Upgrade $3, Add Popular Finishing Options: Add our most popular options to help finish your starter kit. All Items are Sent Loose and do not come installed on the starter kit. Includes: B : Three Piece Dual Latching Hood B1620PTF: Grille Shell and Insert without Crankhole Fitted to Shell Z-491-2: Walker Radiator Z-Series for Chevy Engine B-1002: 32 Fender Package* B-180-BAR: 32 Dropped Headlight Bar* B-180-BB: 32 Headlight Bar Bolt Kit* B-180-SC: Braided Stainless Steel Headlight Wire Conduit* B-180-TS: 32 Stainless Steel Headlights with Turn Signals* SB580C: Mild Steel Tilt Steering Column FR1717DD: 9/16-26x3/4-36 U-Joint FR1790PL: 5/8-36x3/4-36 U-Joint SB598DD18: Plain Double End Splined Shaft B-008-SS: Stainless Steel Bumper Set *Not Included in Hi-Boy Look Package Package Upgrade for Full Fendered Look $7, Package Upgrade for Hi-Boy Look $4, Installation of Finishing Options: Includes the labor for the Installation of all the above components. Labor Charge $15, Kit as shown minus Wheels and Tires starts at $59, Finishing Touches We offer a wide variety of products to get your body into a finished car. Finishing Touches start on page 50. CustomerService@BrookvilleRoadster.com

24 Limited Edition 1932 Phanton Introducing the Latest Body Style The 32 Phanton Designed by Chip Foose. Built by Brookville Roadster Dreamed up by Chip Foose while touring the Brookville Roadster plant in The Phanton was inspired by the looks of the Phaeton and a Tudor. This body s unique style is a show stopper and is limited to only 32 builds. Each build includes a Chip Foose designed Cowl Ornament and Framed certificate of Authenticity The Phanton body works on our 1932 Frame or Chassis Package. The 1932 Phanton Body starts at $35,

25 Limited Edition 1932 Phanton Body Option Guide Cowl Top Smooth Cowl Top N/C Cowl Top with Vent Stock Dash Smooth Roadster Dash Stock Smooth Dash with Glove Box Door $ Stock Dash with Oval Recess and Glove Box Door $ Stock Dash with Oval Recess $ Smooth Dash with 5 Gauge Oval Cutouts $60.00 Smooth Dash with 6 Gauge Oval Cutouts $60.00 No Dash N/C Glove Box (Installed) Long Glove Box $ Short Glove Box $ No Glove Box Stock Seat Area Flat Pan Under the Seat with Flat Floor Stock No Floor Pans N/C Front Floor Steel Front Floor for Flat Firewall Not Installed $ No Front Floor Stock Firewall Flat Firewall Kit Installed $ No Firewall Stock Windshield Lower Stanchions Brookville Bronze Lower Stanchions Installed $ Chrome Lower Stanchions Installed $ Wanless Windshield Kit Installed $ Brookville Brookville Lower Stanchion Holes Drilled Only $50.00 Vintique Lower Stanchion Holes Drilled Only $50.00 No Stanchions Stock Door Style Doors with Outside Handle Hole N/C Doors without Outside Handle Hole Stock Outside Door Handles Outside Door Handles Installed $ No Outside Door Handles Stock Suicide Door Safety Kit Suicide Door Safety Kit Installed $ No Suicide Door Safety Kit Handles Stock Crating Crate Body for Shipping $ Tarp and Wrap Body for Show for Shop Pickup $ No Shipping N/C Phanton Starter Package Starter Package Includes the following: 32 Phanton Body. See this page for stock options and body upgrades. 32 Chassis. See page 42 for stock options and Chassis upgrades. Assembly of the Chassis to the Rolling Chassis Stage. Mounting the Body to the Chassis and Shimming of the body. 32 Phanton Starter Package $43, Starter Package Upgrade Options Stainless Steel Chassis Package Upgrade: Upgrade the above chassis to our Stock Stainless Steel Chassis Package. See page 42 for what is included. Chassis Upgrade to Stock Stainless Package $1, Add Popular Finishing Options: Add our most popular options to help finish your starter kit. All Items are Sent Loose and do not come installed on the starter kit. Includes: B : 32 Three Piece Dual Latching Hood B1620PTF: 32 Grille Shell and Insert without Crankhole Fitted to Shell Z-491-2: Walker Radiator Z-Series for Chevy Engine B-1002: 32 Fender Package* B-180-BAR: 32 Dropped Headlight Bar* B-180-BB: 32 Headlight Bar Bolt Kit* B-180-SC: Braided Stainless Steel Headlight Wire Conduit* B-180-TS: 32 Stainless Steel Headlights with Turn Signals* SB580C: Mild Steel Tilt Steering Column FR1717DD: 9/16-26x3/4-36 U-Joint FR1790PL: 5/8-36x3/4-36 U-Joint SB598DD18: Plain Double End Splined Shaft B-1003-WSFKC2: 2 Chopped Chrome Windshield Kit B-008-SS: Stainless Steel Bumper Set *Not Included in Hi-Boy Look Package Package Upgrade for Full Fendered Look $8, Package Upgrade for Hi-Boy Look $5, Installation of Finishing Options: Includes the labor for the Installation of all the above components. Labor Charge $15, CustomerService@BrookvilleRoadster.com

26 32 Lakester Packages The 32 Lakester The 32 Lakester is available as a 32 Roadster, Coupe, and Roadster Pickup. The Lakester body and frames give the appearance of a channeled body to get a lower more aggressive look without as much work to do so. 32 Lakester Coupe Starts at $42, Lakester Pickup Starts at $24, Lakester Roadster Starts at $29,

27 Roller and Turnkey Services We Built these cars to go to the 50th LA Roadster show in Here we stopped in Shamrock, TX. Build your Dream Rod Today! Let Brookville Roadster build that Street Rod of your dreams. If you have been wanting a street rod but have not had the time to build one yourself, let the experts at Brookville Roadster build your dream to reality. In addition to the Starter Packages we offer Roller and Turnkey services to get your project started and finished in no time! Rollers The next step from the Starter Package is the Roller. The Roller takes the Starter Package and we can install any of the finishing components found in this catalog or you can provide your own. This is a great option for those who don t want a complete turnkey but not comfortable with the idea of installing the hood, radiator, fenders, or anything else themselves. Rollers can be as simple as us installing the hood to a car that just needs to be painted and upholstered. Check out page 49 for Labor Charges for common tasks such as installing a hood, or give us a call to discuss with one our Customer Service Reps and get a custom quote! Turnkeys Do you want a Roadster, Roadster Pickup, or Coupe but don t want to put one together yourself? Our Turnkeys are just what you need. Turnkeys are complete cars built to your exact specification by our team of experts. Call one of our Customer Service Representatives today to get a price for a brand new all steel street rod. CustomerService@BrookvilleRoadster.com

28 All Steel Model A Pickup Beds Model A Pickup Beds See Page 103 For Model A Pickup Bed Parts See Page 104 for Later Model Beds NOTE: All Pickup Beds will have the tailgate fitted but it must be purchased as a separate unit. Stock Bed For Roadster Pickup Short Bed For Roadster On Hi-Boy Frame Why spend the time and money trying to beat that refugee pickup bed into almost perfect shape, when you can get an ALL-STEEL TM repro from us? It will fit right, look right, and Ol Henry himself couldn t tell it from his own. All construction is the same as original with your choice of complete bed fully assembled or an unassembled kit. Also, the tailgate can be ordered with or without the Ford script. For all you rodders, you can order the same quality bed in an 8 1/2 shorter-than-stock length. Both short and original length beds are available with or without metal pans in the center of the bed. Bed parts are available separately and are interchangeable with the original. Short Bed For Closed Cab Roadster Pickup Beds A-975-UN Unassembled stock bed (Less tailgate- See Option Guide) $1, A-975-AB Stock bed (less tailgate) $1, A-975-ABW Welded stock bed for smooth no-rivet look (less tailgate) $1, A-975-SH Short bed 28-31(less tailgate) $1, A-975-AEXT Short bed for extended cab pickup on Model A frame (less tailgate) $1, A-975-BEXT Short bed for extended cab with Model A frame (less tailgate) $1, A-975-AEXTHB Short bed for extended cab with 32 Hi-boy frame (less tailgate) $1, A-975-BEXTHB Short bed for extended cab with 32 Hi-Boy frame (less tailgate) $1, Model A Pickup Bed Options Please Note: Primer is for illustrative use only. Bodies and sheet metal components do not come primered. Extension Pan Included For A Cleaner Look Rear Pickup Bed Roll Pans The Rear Roll Pan is Welded on to the Bed and the Extension Panel easily Bolts to the Rear Roll Pan and Last Rear Crossmember on Bed. They can even be added to trucks that are already done. The extension pan is included for a finished look. Specify plain or ribbed finish on this pan when ordering. AB-914-BR Rear Roll Pan with Tail Lights (specify smooth or ribbed extention pan) $ AB-914-BRWO Rear Roll Pan without Tail Lights (specify smooth or ribbed extention pan) $ Hidden Latch Pins For Tailgate For those of you who don t like the appearance of the original-style Model A tailgate hooks, we offer our special Hidden Latch Pins. They are a terrific way to clean up the appearance of your truck bed. Available as a kit for do-it-yourselves, or already welded in place when you purchase a tailgate. A-952-LP Hidden Latch Pin Kit (shown far left) $

29 All Steel Model A Pickup Beds Option Guide A-975-AB and A-975-ABW Options Extended Cab and Hi-Boy Style Model A Beds Bed Sides Stock Style Bed Sides Stock Smooth Style Bed Sides N/C Fender Spacers Fender Spacers Installed Stock No Fender Spacers -$50.00 Bed Stake Pockets Reinforcement Bed Stake Pocket Reinforcement Installed Stock No Bed Stake Pocket Reinforcement Installed -$15.00 Bed Strips Plain Stock Style Bed Strips Stock Plain Street Rod Style Bed Strips N/C Stainless Steel Stock Style Bed Strips $50.00 Stainless Steel Street Rod Style Bed Strips $50.00 No Bed Strips -$40.00 Bed Floor Stock Pickup Bed Wood Floor Cutout for Center Pan Stock Street Rod Style Bed Wood Floor N/C No Cutout for Center Pan No Bed Wood -$ Center Pan Plain Center Pan for Stock Wood Floor Stock Stainless Steel Center Pan for Stock Wood Floor $35.00 No Bed Center Pan N/C Bed Bolts Plain Stock Style Bed Bolts Stock Stainless Steel Stock Style Bed Bolts $40.00 Polished Stainless Steel Stock Style Bed Bolts $50.00 Plain Street Rod Style Bed Bolts N/C Stainless Steel Street Rod Style Bed Bolts $40.00 Polished Stainless Steel Street Rod Style Bed Bolts $50.00 No Bed Bolts Installed -$30.00 Roll Pan Rear Roll Pan without Tail Lights $ with Smooth Extension Pan Rear Roll Pan without Tail Lights $ with Ribbed Extension Pan Rear Roll Pan with Tail Lights $ with Smooth Extension Pan Rear Roll Pan with Tail Lights $ with Ribbed Extension Pan No Roll Pan Stock Sill Board Stock Sill Boards Use on Stock Model A Frame Stock Notched Sill Boards for 2 Kickup Frame $ No Sill Boards -$80.00 Tailgate Tailgate with Stock Chains and Hooks with Ford Script $ Tailgate with Stock Chains and Hooks without Ford Script $ Tailgate with Hidden Latch Pins with Ford Script $ Tailgate with Hidden Latch Pins without Ford Script $ No Tailgate Installed Stock Crating Wood Shipping Crate for Bed $ Tarp and Wrap for Show or Shop Pickup $ No Preparation for Shipping N/C Bed Strips Plain Street Rod Style Bed Strips Stock Stainless Steel Street Rod Style Bed Strips $50.00 No Bed Strips -$40.00 Bed Floor Street Rod Style Bed Wood Floor Stock (No Cutout for Center Pan) No Bed Wood -$ Bed Bolts Plain Street Rod Style Bed Bolts Stock Stainless Steel Street Rod Style Bed Bolts $40.00 Polished Stainless Steel Street Rod Style Bed Bolts $50.00 No Bed Bolts Installed -$30.00 Roll Pan Rear Roll Pan without Tail Lights $ with Smooth Extension Pan Rear Roll Pan without Tail Lights $ with Ribbed Extension Pan Rear Roll Pan with Tail Lights $ with Smooth Extension Pan Rear Roll Pan with Tail Lights $ with Ribbed Extension Pan No Roll Pan Stock Tailgate Tailgate with Stock Chains and Hooks with Ford Script $ Tailgate with Stock Chains and Hooks without Ford Script $ Tailgate with Hidden Latch Pins with Ford Script $ Tailgate with Hidden Latch Pins without Ford Script $ No Tailgate Installed Stock Crating Wood Shipping Crate for Bed $ Tarp and Wrap for Show or Shop Pickup $ No Preparation for Shipping N/C Please Note: Primer is for illustrative use only. Bodies and sheet metal components do not come primered. Original Style Tailgate Hook and Chain Latch Shown CustomerService@BrookvilleRoadster.com

30 1932 Pickup Beds and Option Guide 1932 Roadster Pickup Bed Antique Pickup Beds Took The Worst Abuse Over The Years. Start With A Fresh All Steel Bed And Save Your Time. Contoured Front Edge Matches Contour Of Our 32 RPU Body 32 Roadster Pickup Bed For Hi-Boy Fenderless Truck Bed For Full Fender 32 Roadster Pickup B-975-EXT Model A Style Roadster Pickup Bed for Extended 32 Cab Less Tailgate $1, B-975-FF Roadster Pickup Bed for Full Fendered Extended 32 Cab Less Tailgate $2, B-975-CCBFF Closed Cab Pickup Bed Less Tailgate $3, B-975-FFL 32 Roadster Pickup Bed For Full Fendered Extended 32 Cab and Lakester Frame $3, Roadster Pickup Bed Option Guide Bed Strips Plain Bed Strips -$20.00 Stainless Steel Bed Strips Stock No Bed Strips -$30.00 Bed Floor Bed Wood Stock No Bed Wood -$ Bed Bolts Plain Bed Bolts -$20.00 Stainless Steel Bed Bolts -$10.00 Polished Stainless Steel Bed Bolts Stock No Bed Bolts -$30.00 Fuel Door Fuel Door Installed Stock No Fuel Door Installed N/C Crating Wood Shipping Crate for Bed $ Tarp and Wrap for Show or Shop Pickup $ No Preparation for Shipping N/C Tailgate Tailgate with Hidden Latch Pins with Ford Script $ Tailgate with Hidden Latch Pins without Ford Script $ No Tailgate Installed Stock One of our Most Popular, The 1932 Roadster Pickup - Full Fendered Uses The B-975-FF Custom Bed Design Listed Above. See Page 104 for Later Model Beds 30 Please Note: Primer is for illustrative use only. Bodies and sheet metal components do not come primered

31 1932 Closed Cab Pickup Package The Great Looks Of A 32 Passenger Car in a Closed Cab Pickup Package 32 Ford Closed Cab Pickup Bed, Fender & Hood Package 32 Ford Truck Cab Not Included 1932 Ford Closed Cab Builder Package: Exclusive Shortened 32 Steel Bed Street Rod Bed Wood Stainless Steel Bed Strips Hidden Latch Tailgate with Ford Script Stainless Steel Polished Bed Bolts Hidden Door For Fuel Filler Full Fender & Running Board Package (see page 54) Original Style 32 Passenger Car Gas Tank 3-Piece Dual Latching Hood 32 Grille Shell 32 Grille Apron 32CCFFPUKIT Closed Cab Builder Kit $8, Note: The photo above is to illustrate a possible completed car. Read included items carefully. Wheels and tires, chassis shown not included Optional Components Available: 32 Walker Radiator Dropped Headlight Bar, Lights & Conduits 32 Grille Insert 32 Passenger Car Tail Lights Front & Rear Chrome Spreader Bars Entire Kit Mounts On Standard Length 1932 Passenger Car Chassis! Uses 1932 Passenger Car Fenders, Hood And Grille Components! All you need is a complete Ford closed truck cab and we have the rest of the components to build this hot rod! We have designed a neat and deceptively simple pickup bed and fender package that gives these trucks the legendary good looks of a 32 passenger car. The kit includes our own all steel full front and rear fender kit, original style running boards, a complete 32 grille shell and insert, and our exclusively designed shortened bed which allows the use of standard 32 Roadster /Coupe fenders. This custom bed mounts to a standard length 32 passenger car chassis and uses a passenger car fuel tank, frame horn covers and tail lights. The unique shorter bed positions the closed cab properly to also allow the use of full passenger car type front fenders, hood and grille up front. B-975CCBFF Closed Cab Pickup Bed $3, Tailgate Sold separately - Shortened bed for use with fenders or without fenders for a Hi-Boy look. See Page 30. Hidden Door For Fuel Filler Chassis Sold Separately Our 1932 Ford Chassis Makes A Great Foundation For This Package! (See page 42 for details on our complete 32 chassis packages) CustomerService@BrookvilleRoadster.com

32 Restoration Services Restore your Dream Rod Do you have a Ford project that is tired and worn out? One that needs a lot of patch panels and body work? Then look no further than the experts here at Brookville Roadster. We can restore your project using our new subframes, patch panels, and floor pans for most Ford Body Styles. Give us a call and we will help your get your specific needs quoted, no job is too big or too small for us. Let our Experts Restore that Barn Find for you. This Original 32 Three Window is in the process of being restored by our expert craftsmen. Brookville Is A Total Automotive Manufacturing Plant

33 Frames Frames Perimeter Frames Perimeter frames are the most basic of the frames we offer. A perimeter frame is an assembled frame that you can then add the brackets to and make into a chassis. AB-500-C Stock Perimeter Frame $ AB-500-C Stock Perimeter Frame with 2 Kickup $ AH-660-CAP Hi-Boy Perimeter Frame $2, AH-660-CBP Hi-Boy Perimeter Frame $2, B-660-C 32 Perimeter Frame $2, B-660-CL 32 Lakester Perimeter Frame $4, Full Bracket Frames The Full Bracket Frame is the same as a perimeter frame but includes the brackets which are welded on. See the Frame Option Guides on the following pages to see which brackets are included C Stock Full Bracket Frame $1, C Stock Full Bracket Frame with 2 Kickup $1, AH-660-CFA Hi-Boy Full Bracket Frame $3, AH-660-CFB Hi-Boy Full Bracket Frame $3, B-660-F 32 Full Bracket Frame $3, B-660-FL 32 Full Bracket Lakester Frame $5, All Frames Require a $1000 Nonrefundable Deposit Model A Full Bracket Frame Model A Perimeter Frame 2" Kickup Hi-Boy Perimeter Frame Flat upper rail allows the Model A body to sit flat on the frame eliminating the gap between body and frame 32 Full Bracket Frame Traditional Style. Exceptional Strength. Our Hi-Boy and 32 frames are made using our own fully boxed laser cut rails that are fixtured to assure proper fit and tremendous strength. All brackets and our traditional 34 style X-member are hand fitted and welded into place on our frame fixture. The exclusive 34 Ford style X-member creates an extremely rigid frame while maintaining a more traditional look. The open channels make it easy to route fuel lines, brake lines and exhaust system. CustomerService@BrookvilleRoadster.com

34 Chassis Chassis Packages Chassis Packages include a Frame and all the chassis components that you will need. We can even assemble the chassis so it is ready for a body. See the Chassis Option Guides for what comes standard with each chassis package and what options are available to build the perfect chassis for your application. All Chassis Require a $2000 Nonrefundable Deposit Some Optional Equipment Shown (See Option Guide For Details) Model A Chassis Packages 1010-C Model A Chassis Package $6, Stainless Steel Package starts at $9, Style (Hi-Boy) Chassis Packages Some Optional Equipment Shown (See Option Guide For Details) 1007-AC Model A 32 Style (Hi-Boy) Chassis Package $8, Stainless Steel Package starts at $10, BC Model A 32 Style (Hi-Boy) Chassis Package $8, Stainless Steel Package starts at $10, Chassis Packages 1113-C 32 Chassis Package $7, Stainless Steel Package starts at $9, CL 32 Lakester Chassis Package $10, Please Note: Primer is for illustrative use only. Bodies and sheet metal components do not come primered

35 Ford Model A Frame Option Guide Choose your Model A frame on page 33. Use the sheet below to view what comes standard on a frame then you may customize the frame to meet your needs with our upgrades. Upgrade pricing is additional to the cost of the frame on page 33. Note: Stock means that the Option is included in the Price of the Body. Options for Perimeter and Full Bracket Frames Rail Style Stock Short Rails with Holes Stock Stock Short Rails without Holes N/C Stock Short Rails with No Low Rider N/C Long Rails with Holes N/C Long Rails without Holes N/C Front Crossmember Independent Crossmembers Include Suspension Model A Front Crossmember Stock Flat Front Crossmember $50.00 TCI Independent Front Crossmember $ TCI Stainless Steel Independent Front Crossmember $ Heidt s Independent Front Crossmember $ Heidt s Stainless Steel Independent Front Crossmember $ Kugel Independent Front Crossmember $ Kugel Stainless Steel Independent Front Crossmember $ No Front Crossmember -$50.00 Center Crossmember Chevy Center Crossmember N/C Ford Center Crossmember N/C Hood Mounting Brackets Hood Mounting Brackets Stock No Hood Mounting Brackets -$10.00 Cowl Mounting Brackets Cowl Mounting Brackets Stock No Cowl Mounting Brackets -$12.00 Rear Crossmember 2 Kickup Rear Crossmember with $ Coilover Shock Mounts 2 Kickup Rear Crossmember $ Out the Back Rear Crossmember Stock Model A Rear Crossmember $ Style Rear Crossmember $ Quickchange Rear Crossmember $ No Rear Crossmember -$ Kickup Rear Crossmember with Coil Over $ Shock Mounts Customer Supplied Rear Crossmember $50.00 Options for Full Bracket Frames Only Front Panhard Bar Bracket Front Panhard Bracket Stock No Front Panhard Bracket -$49.00 Engine Mounts Small Block Chevy without Air Stock Small Block Chevy with Air N/C Small Block Ford without Air N/C Small Block Ford with Air N/C Ford Flathead $ Big Block Chevy without Air $ Big Block Chevy with Air $ Big Block Ford without Air $ Big Block Ford with Air $ LS3 Motor Mount $ No Engine Mount -$ Transmission Mounts Chevy 350 Turbo Stock Chevy 400 Turbo N/C Chevy 700R4 N/C Options for Full Bracket Frames Only (Continued) Transmission Mounts (Continued) Ford C-4 N/C Ford C-6 N/C Ford AOD N/C 1939 Ford N/C S-10 5 Speed N/C Tremac 5 Speed N/C Tremac 6 Speed N/C 4 Speed N/C 4L60 N/C 4L75 N/C 4L80 N/C No Transmission Mount -$ Front Shock Mount Bracket Full Fender Front Shock Bracket Stock Headlight Shock Mount Combo Bracket N/C So-Cal F1 Bracket- Plain $ S0-Cal F1 Bracket- Stainless Steel $ So-Cal F1 Bracket (Hi-Boy Style)- Plain $ So-Cal F1 Bracket (Hi-Boy Style)- Stainless Steel $ No Front Shock Brackets -$62.00 Vega Mount Bracket Vega Steering Bracket Stock No Vega Steering Bracket -$59.00 Front Linkage Bracket Model A Four Bar Bracket Stock So-Cal Model A Front Radius Rod Bracket (Through Hole) N/C So-Cal Model A Front Radius Rod Bracket (Tie Rod End) N/C TCI Model A Front Radius Rod Bracket (Through Hole) N/C Model A Plain Front Viper Hair Pin Kit $ Model A Stainless Steel Front Viper Hair Pin Kit $ Model A Front Wishbone Bracket N/C Customer Supplied -$20.00 No Front Linkage Bracket -$82.00 Pedal and Bracket Model A Brake Pedal Stock Model A Clutch and Brake Pedal $ Model A Power Booster Brake Pedal and Bracket $ No Pedal Assembly -$ Rear Linkage Bracket Model A Rear Parallel Four Link Bracket Stock Model A Rear Ladder Bar Bracket N/C No Rear Linkage Bracket -$82.00 Customer Supplied Rear Linkage Bracket -$20.00 Rear Panhard Bracket Rear Panhard Bracket for 9 Housing Stock Rear Panhard Bracket for 8 Housing N/C Rear Panhard Bracket for 9 Housing with Ladder Bar N/C No Rear Panhard Bracket -$35.00 Brake Lines Model A Brake Lines Installed (Specify Type of Brakes) $ No Brake Lines Stock Rear End Housing 50 Housing (Specify Spline and Bolt Pattern) $ Housing (Specify Spline and Bolt Pattern) $ No Rear End Housing Stock CustomerService@BrookvilleRoadster.com

36 Ford Model A Hi-Boy Frame Option Guide 36 Choose your Model A frame on page 33. Use the sheet below to view what comes standard on a frame then you may customize the frame to meet your needs with our upgrades. Upgrade pricing is additional to the cost of the frame on page 33. Note: Stock means that the Option is included in the Price of the Body. Options for Perimeter and Full Bracket Frames Front Crossmember Independent Crossmembers Include Suspension Model A Front Crossmember Stock Flat Front Crossmember $50.00 TCI Independent Front Crossmember $ TCI Stainless Steel Independent Front Crossmember $ Heidt s Independent Front Crossmember $ Heidt s Stainless Steel Independent Front Crossmember $ Kugel Independent Front Crossmember $ Kugel Stainless Steel Independent Front Crossmember $ No Front Crossmember -$50.00 Center Crossmember Center X Member for Brake Pedal N/C Center X Member for Brake and Clutch Pedals N/C Rear Crossmember Rear Square Tube Crossmember Setup for Coil Over Stock Model A Rear Crossmember $ Style Rear Crossmember $ Quick Change Rear Crossmember $ No Rear Crossmember -$50.00 Customer Supplied Rear Crossmember $50.00 Body Mounts Body Mounts Drilled $ No Body Mounts Not Drilled Stock Options for Full Bracket Frames Only Front Panhard Bar Bracket Front Panhard Bracket Stock No Front Panhard Bracket -$20.00 Engine Mounts Small Block Chevy without Air Stock Small Block Chevy with Air N/C Small Block Ford without Air N/C Small Block Ford with Air N/C Ford Flathead $ Big Block Chevy without Air $ Big Block Chevy with Air $ Big Block Ford without Air $ Big Block Ford with Air $ LS3 Motor Mount $ No Engine Mount -$40.00 Transmission Mounts Chevy 350 Turbo Stock Chevy 400 Turbo N/C Chevy 700R4 N/C Ford C-4 N/C Ford C-6 N/C Ford AOD N/C 1939 Ford N/C S-10 5 Speed N/C Tremac 5 Speed N/C Tremac 6 Speed N/C 4 Speed N/C 4L60 N/C 4L75 N/C 4L80 N/C No Transmission Mount -$ Options for Full Bracket Frames Only (Continued) Front Shock Mount Bracket Headlight Shock Mount Combo Brackets Stock So-Cal F1 Bracket- Plain $ S0-Cal F1 Bracket- Stainless Steel $ So-Cal F1 Bracket (Hi-Boy Style)- Plain $ So-Cal F1 Bracket (Hi-Boy Style)- Stainless Steel $ No Front Shock Brackets -$30.00 Full Fender Shock Mount Brackets N/C Vega Mount Bracket Vega Steering Bracket Stock No Vega Steering Bracket -$30.00 Front Linkage Bracket Model A Four Bar Bracket Stock So-Cal Model A Front Radius Rod Bracket (Through Hole) N/C So-Cal Model A Front Radius Rod Bracket (Tie Rod End) N/C TCI Model A Front Radius Rod Bracket (Through Hole) N/C Model A Plain Front Viper Hair Pin Kit $ Model A Stainless Steel Front Viper Hair Pin Kit $ Model A Front Wishbone Bracket N/C Customer Supplied -$20.00 No Front Linkage Bracket -$40.00 Pedal and Bracket Hi-Boy Brake Pedal Stock 34 Style Clutch and Brake Pedal $ Style Power Booster Brake Pedal $ No Pedal Assembly -$70.00 Rear Linkage Bracket 32 Rear Tri-Link Bracket Stock Model A Hi-Boy & 32 Rear Ladder Bar Bracket (So-Cal) N/C Model A Hi-Boy & 32 Rear Ladder Bar Bracket N/C (Pete and Jakes) No Rear Linkage Bracket -$30.00 Customer Supplied Rear Linkage Bracket -$20.00 Rear Panhard Bracket Rear Panhard Bracket for 9 Housing N/C Rear Panhard Bracket for 8 Housing N/C Rear Panhard Bracket for 9 Housing with Ladder Bar N/C Quick Change Rear End Panhard Bracket N/C No Rear Panhard Bracket N/C Brake Lines Model A Brake Lines Installed (Specify Type) $ No Brake Lines Stock Rear End Housing 50 Housing (Specify Spline and Bolt Spacing Pattern) $ Housing (Specify Spline and Bolt Spacing Pattern) $ Winter s Quick Change Rear End Starting at $ No Rear End Housing Stock

37 1932 Ford Frame Option Guide Choose your 1932 frame on page 33. Use the sheet below to view what comes standard on a frame then you may customize the frame to meet your needs with our upgrades. Upgrade pricing is additional to the cost of the frame on page 33. Note: Stock means that the Option is included in the Price of the Body. Options for Perimeter and Full Bracket Frames Front Crossmember Independent Crossmembers Include Suspension Model A Front Crossmember Stock Flat Front Crossmember $50.00 TCI Independent Front Crossmember $ TCI Stainless Steel Independent Front Crossmember $ Heidt s Independent Front Crossmember $ Heidt s Stainless Steel Independent Front Crossmember $ Kugel Independent Front Crossmember $ Kugel Stainless Steel Independent Front Crossmember $ No Front Crossmember -$50.00 Center Crossmember Center X Member for Brake Pedal N/C Center X Member for Brake and Clutch Pedals N/C Rear Crossmember Rear Square Tube Crossmember Setup for Coil Over Stock Model A Rear Crossmember $ Style Rear Crossmember $ Quick Change Rear Crossmember $ No Rear Crossmember -$50.00 Customer Supplied Rear Crossmember $50.00 Body Mounts Body Mounts Drilled $ No Body Mounts Not Drilled Stock Options for Full Bracket Frames Only Front Panhard Bar Bracket Front Panhard Bracket Stock No Front Panhard Bracket -$20.00 Engine Mounts Small Block Chevy without Air Stock Small Block Chevy with Air N/C Small Block Ford without Air N/C Small Block Ford with Air N/C Ford Flathead $ Big Block Chevy without Air $ Big Block Chevy with Air $ Big Block Ford without Air $ Big Block Ford with Air $ LS3 Motor Mount $ No Engine Mount -$40.00 Transmission Mounts Chevy 350 Turbo Stock Chevy 400 Turbo N/C Chevy 700R4 N/C Ford C-4 N/C Ford C-6 N/C Ford AOD N/C 1939 Ford N/C S-10 5 Speed N/C Tremac 5 Speed N/C Tremac 6 Speed N/C 4 Speed N/C 4L60 N/C 4L75 N/C 4L80 N/C No Transmission Mount -$ Options for Full Bracket Frames Only (Continued) Front Shock Mount Bracket Headlight Shock Mount Combo Brackets Stock So-Cal F1 Bracket- Plain $ S0-Cal F1 Bracket- Stainless Steel $ So-Cal F1 Bracket (Hi-Boy Style)- Plain $ So-Cal F1 Bracket (Hi-Boy Style)- Stainless Steel $ No Front Shock Brackets -$30.00 Full Fender Shock Mount Brackets N/C Vega Mount Bracket Vega Steering Bracket Stock No Vega Steering Bracket -$30.00 Front Linkage Bracket 32 Four Bar Bracket- Full Fendered Stock So-Cal Model A Front Radius Rod Bracket (Through Hole) N/C So-Cal Model A Front Radius Rod Bracket (Tie Rod End) N/C TCI Model A Front Radius Rod Bracket (Through Hole) N/C 32 Plain Front Viper Hair Pin Kit $ Stainless Steel Front Viper Hair Pin Kit $ Front Wishbone Bracket N/C 32 Front Wish Bone Bracket ( Johnson s Style) N/C 32 Front Wish Bone Bracket (Shadow Rod s Style) N/C Customer Supplied $20.00 No Front Linkage Bracket -$40.00 Pedal and Bracket 34 Style Brake Pedal Stock 34 Style Clutch and Brake Pedal $ Style Power Booster Brake Pedal and Bracket $ No Pedal Assembly -$70.00 Rear Linkage Bracket 32 Rear Tri-Link Bracket Stock Model A Hi-Boy & 32 Rear Ladder Bar Bracket (So-Cal) N/C Model A Hi-Boy & 32 Rear Ladder Bar Bracket (Pete and Jakes) N/C No Rear Linkage Bracket -$30.00 Customer Supplied Rear Linkage Bracket -$20.00 Rear Panhard Bracket Rear Panhard Bracket for 9 Housing N/C Rear Panhard Bracket for 8 Housing N/C Rear Panhard Bracket for 9 Housing with Ladder Bar N/C Quick Change Rear End Panhard Bracket N/C No Rear Panhard Bracket N/C Brake Lines Model A Brake Lines Installed (Specify Type of Brake) $ No Brake Lines Stock Rear End Housing 50 Housing (Specify Spline and Bolt Pattern) $ Housing (Specify Spline and Bolt Pattern) $ Winter s Quick Change Rear End Starting at $ No Rear End Housing Stock CustomerService@BrookvilleRoadster.com

38 Ford Model A Chassis Option Guide Choose your Chassis on page 34. Use the sheet below to view what comes standard then you may customize to meet your needs with our upgrades. Upgrade pricing is additional to the cost found on page 34. Note: Stock means that the Option is included in the Price of the Chassis. An Asterisk (*) next to the price means it is included in the Stainless Steel Chassis package pricing on page 34 and Starter Package upgrade. 38 Assembly Unassembled Chassis Stock Assemble Chassis to Roller Stage $ Rail Style Stock Short Rails with Holes Stock Stock Short Rails without Holes N/C Stock Short Rails with No Low Rider N/C Long Rails with Holes N/C Long Rails without Holes N/C Front Crossmember Independent Crossmembers Include Suspension Model A Front Crossmember Stock TCI Independent Front Crossmember $ TCI Stainless Steel Independent Front Crossmember $ Heidt s Independent Front Crossmember $ Heidt s Stainless Steel Independent Front Crossmember $ Kugel Independent Front Crossmember $ Kugel Stainless Steel Independent Front Crossmember $ Flat Front Crossmember $50.00 Front Shock Mount Bracket Full Fender Front Shock Bracket Stock Headlight Shock Mount Combo Bracket N/C So-Cal F1 Bracket- Plain $ S0-Cal F1 Bracket- Stainless Steel $ So-Cal F1 Bracket (Hi-Boy Style)- Plain $ So-Cal F1 Bracket (Hi-Boy Style)- Stainless Steel $ Front Shocks Plain Front Shocks Stock Chrome Front Shocks $30.00* Polished Ridetech Front Shocks $ Front Spring Perches Plain Front Spring Perches Stock Polished Front Spring Perches $50.00* Lower Shock Mounts Plain Lower Shock Mounts Stock Polished Lower Shock Mounts $20.00* Dropped Front Axle 46 4 Dropped Plain Tube Axle Stock 46 4 Dropped Chrome Tube Axle $250.00* 46 4 Dropped Plain I-Beam Axle N/C 46 4 Dropped Chrome I-Beam Axle $ Dropped Plain I-Beam Axle N/C 47 4 Dropped Chrome I-Beam Axle $ Dropped Plain Drilled I-Beam Axle $ Dropped Chrome Drilled I-Beam Axle $ Dropped Plain Drilled I-Beam Axle $ Dropped Chrome Drilled I-Beam Axle $ Dropped Plain I-Beam Axle $ Dropped Chrome I-Beam Axle $ Spindles Plain Spindle with Nut and Washers Stock Polished Spindle with Nut and Washers $260.00* Spring U-Bolt Plain U-Bolt Stock Chrome U-Bolt $40.00* Front Spring and Clamps Plain Multi-Leaf Spring with Reversed Eye Stock with Stainless Steel Clamps Chrome Multi-Leaf Spring with Reversed Eye $100.00* with Stainless Steel Clamps Plain Mono-Leaf Spring N/C Chrome Mono-Leaf Spring $ Spring Shackles Plain Front Spring Shackles Stock Polished Front Spring Shackles Lower Steering Arms $30.00* Plain Lower Steering Arms Stock Polished Lower Steering Arms $50.00* Plain Lower Steering Arms for Wishbones N/C Polished Lower Steering Arms for Wishbones $ Plain Lower Steering Arms for 5 Drop Axle $35.00 Chrome Lower Steering Arms for 5 Drop Axle Tie Rod and Drag Link $ Plain Tie Rod and Drag Link Stock Polished Tie Rod and Drag Link Front Panhard Bar Bracket $150.00* Plain Front Panhard Stock Polished Front Panhard Steering Box $75.00* So-Cal Vega Steering Box Stock Mavel Unisteer Kit $ Flaming River Steering Box Vega Pitman Arm $ Unpolished Stainless Steel Pitman Arm Stock Polished Pitman Arm Front Linkage Bracket $20.00* Plain Model A Four Bar Kit Stock Polished Model A Four Bar Kit $220.00* Plain Front Radius Rod Kit (Through Hole) N/C Polished Front Radius Rod Kit (Through Hole) $ Plain Front Radius Rod Kit (Tie Rod End) N/C Polished Front Radius Rod Kit (Tie Rod End) $ Plain Front Viper Hair Pin Kit N/C Chrome Front Viper Hair Pin Kit $ Speedway Front Wishbone- No Holes $60.00 Speedway Front Wishbone- with Holes Engine Mounts $ Small Block Chevy without Air Stock Small Block Chevy with Air N/C Small Block Ford without Air N/C Small Block Ford with Air N/C Ford Flathead $ Big Block Chevy without Air $ Big Block Chevy with Air $ Big Block Ford without Air $ Big Block Ford with Air $ LS3 Motor Mount Transmission Mounts $ Chevy 350 Turbo Stock Chevy 400 Turbo N/C Chevy 700R4 N/C Ford C-4 N/C Ford C-6 N/C Ford AOD N/C 1939 Ford N/C S-10 5 Speed N/C Tremac 5 Speed N/C Tremac 6 Speed N/C 4 Speed N/C 4L60 N/C 4L75 N/C 4L80 Pedal and Bracket N/C Model A Brake Pedal Stock Model A Clutch and Brake Pedal $ Model A Power Booster Brake Pedal and Bracket $ Continued to Next Page

39 Ford Model A Chassis Option Guide Front Brakes Econo GM Disc Brake Kit 5x4.5 Stock Econo GM Disc Brake Kit 5x4.75 N/C Wilwood Plain Front Brake Kit 4.5 & 4.75 $ Wilwood Polished Front Brake Kit 4.5 & 4.75 $ Wilwood 4.5 and 4.75 Plain with $ Drilled and Slotted Rotors Wilwood 4.5 and 4.75 Polished with $ Drilled and Slotted Rotors Plain So-Cal 50 Buick Front Brake Kit $ (Specify Bolt Pattern) Polished So-Cal 50 Buick Front Brake Kit (Specify Bolt Pattern) $ Plain So-Cal Finned Front Brake Kit 4.5 & 4.75 $ Plain Super Stopper Disc Brake Kit 5x5.5 $ Polished Super Stopper Disc Brake Kit 5x5.5 $ Plain Kinmont Front Brakes 4.5 and 4.75 $1, Plain Kinmont Front Brakes 5.5 $1, Polished Kinmont Front Brakes 4.5 and 4.75 $2, Polished Kinmont Front Brakes 5.5 $3, Lincoln Drum Front Brakes $1, Brake Line Kits Installed Kit for Drum Front and Rear $ Kit for Drum Front and Rear with Power Booster $ Kit for GM Front Disc and Drum Rear $ Kit for GM Front Disc and Drum Rear with Power Booster $ Kit for GM Front and Rear Disc Brakes $ Kit for GM Front and Rear Disc Brakes $ with Power Booster Kit for Wilwood Front and Rear Disc Brakes $ Kit for Wilwood Front and Rear Disc Brakes with Power Booster $ No Brake Lines Stock Heat Shields Brushed Finished Aluminum Heat Shields $ Polished Aluminum Heat Shields $ No Heat Shields Stock Rear Brakes Rear Drum Brakes 4.5 $ Rear Drum Brakes 4.75 $ Rear Drum Brakes 5.5 $ Plain Econno Rear Disc Brake Kit 4.5 and 4.75 $ Plain Rear Wilwood Disc Brake Kit 4.5 and 4.75 $ Plain Rear Wilwood Disc Brake Kit with Drilled and Slotted 4.5 and 4.75 $ Polished Rear Wilwood Disc Brake Kit with Drilled and Slotted 4.5 and 4.75 $1, Polished Rear Wilwood Disc Brake Kit 4.5 and 4.75 $ Polished Rear Wilwood Disc Brake Kit 5.5 $1, Plain Wilwood Disc Brake Kit 5x5.5 $1, Polished Wilwood Disc Brake Kit 5x5.5 $1, Lincoln Drum Rear Brakes $1, No Rear Brakes Stock Rear Linkage Plain Rear 4-Bar Kit Stock Polished Rear 4-Bar Kit $225.00* Plain Rear Ladder Bar Kit $ Chrome Rear Ladder Bar Kit $ Plain Rear TriLink Kit $ Polished Rear TriLink Kit $ Rear Panhard Bracket Plain Rear Panhard Bracket for 9 Rear End Stock Polished Rear Panhard Bracket for 9 Rear End $120.00* Plain Rear Panhard Bracket for 9 Housing N/C with Ladder Bar Housing Polished Rear Panhard Bracket for 9 Housing with Ladder Bar Housing $ Plain Quick Change Rear End Panhard Bracket Polished Quick Change Rear N/C End Panhard Bracket $ No Rear Panhard Bracket Rear Crossmember N/C 2 Kickup Rear Crossmember with Coilover Shock Mounts $ Out the Back Rear Crossmember Stock Plain Model A Rear Crossmember and spring $ Plain 40 Style Rear Crossmember and spring $ Chrome Model A Rear Crossmember and spring $1, Chrome 40 Style Rear Crossmember and spring $ Quickchange Rear Crossmember $ Kickup Rear Crossmember with Coil Over $ Shock Mounts Rear Coil Over Shocks Plain Rear Coil Over Shocks Stock Polished Rear Coil Over Shocks $60.00* Plain Ridetech Rear Coilover Shocks with Plain Bolts $ Polished Ridetech Rear Coilover Shocks with Plain Bolts $ Plain Pete and Jake s Covered Shocks N/C Polished Pete and Jake s Covered Shocks N/C Ridetech Polished Shocks with Covers $ Rear Housing 50 Inch Housing (Specify Spline and Bolt Pattern) N/C 52 Inch Housing (Specify Spline and Bolt Pattern) N/C Winter s Quick Change Starting at $2, No Rear End Stock Center Section 9 Open Center Section (Specify Spline and Gear Ratio) $ Positrac Center Section (Specify Spline and Gear Ratio) $1, No Center Section Gas Tank N/C Saddle Tank Installed $ Saddle Tank Installed $ No Gas Tank N/C Note Descriptions with Plain means Mild Steel Components. Descriptions with Polished means Polished Stainless Steel unless Otherwise Noted. CustomerService@BrookvilleRoadster.com

40 Ford Model A Hi-Boy Chassis Option Guide Choose your Chassis on page 34. Use the sheet below to view what comes standard then you may customize to meet your needs with our upgrades. Upgrade pricing is additional to the cost found on page 34. Note: Stock means that the Option is included in the Price of the Chassis. An Asterisk (*) next to the price means it is included in the Stainless Steel Chassis package pricing on page 34 and Starter Package upgrade. Build Year Hi-Boy Chassis N/C 30-31Hi-Boy Chassis N/C Assembly Unassembled Chassis Stock Assemble Chassis to Roller Stage $ Front Crossmember Independent Crossmembers Include Suspension Model A Front Crossmember Stock TCI Independent Front Crossmember $ TCI Stainless Steel Independent Front Crossmember $ Heidt s Independent Front Crossmember $ Heidt s Stainless Steel Independent Front Crossmember $ Kugel Independent Front Crossmember $ Kugel Stainless Steel Independent Front Crossmember $ Flat Front Crossmember $50.00 Front Shock Mount Bracket Headlight Shock Mount Combo Bracket Stock So-Cal F1 Bracket (Hi-Boy Style)- Plain $ So-Cal F1 Bracket (Hi-Boy Style)- Stainless Steel $ Front Shocks Plain Front Shocks Stock Chrome Front Shocks $30.00* Polished Ridetech Front Shocks $ Front Spring Perches Plain Front Spring Perches Stock Polished Front Spring Perches $50.00* Lower Shock Mounts Plain Lower Shock Mounts Stock Polished Lower Shock Mounts $20.00* Dropped Front Axle 46 4 Dropped Plain Tube Axle Stock 46 4 Dropped Chrome Tube Axle $250.00* 46 4 Dropped Plain I-Beam Axle N/C 46 4 Dropped Chrome I-Beam Axle $ Dropped Plain I-Beam Axle N/C 47 4 Dropped Chrome I-Beam Axle $ Dropped Plain Drilled I-Beam Axle $ Dropped Chrome Drilled I-Beam Axle $ Dropped Plain Drilled I-Beam Axle $ Dropped Chrome Drilled I-Beam Axle $ Dropped Plain I-Beam Axle $ Dropped Chrome I-Beam Axle $ Spindle Nut and Washer Plain Spindle with Nut and Washers Stock Polished Spindle with Nut and Washers $260.00* Spring U-Bolt Plain U-Bolt Stock Chrome U-Bolt $40.00* Front Spring and Clamps Plain Multi-Leaf Spring with Reversed Eye Stock with Stainless Steel Clamps Chrome Multi-Leaf Spring with Reversed Eye $200.00* with Stainless Steel Clamps Plain Mono-Leaf Spring N/C Chrome Mono-Leaf Spring $ Note Descriptions with Plain means Mild Steel Components. Descriptions with Polished means Polished Stainless Steel unless Otherwise Noted. Spring Shackles Plain Front Spring Shackles Stock Polished Front Spring Shackles Lower Steering Arms $30.00* Plain Lower Steering Arms Stock Polished Lower Steering Arms $50.00* Johnson s Polished Steering Kit $ Plain Lower Steering Arms for Wishbones N/C Polished Lower Steering Arms for Wishbones $ Plain Lower Steering Arms for 5 Drop Axle $35.00 No Lower Steering Arms Tie Rod and Drag Link $ Plain Tie Rod and Drag Link Stock Polished Tie Rod and Drag Link $150.00* Included in Above Johnson s Polished Steering Kit N/C Front Panhard Bar Bracket Plain Front Panhard Stock Polished Front Panhard Steering Box $75.00* So-Cal Vega Steering Box Stock Mavel Unisteer Kit $ Flaming River Vega Steering Box Vega Pitman Arm $ Plain Pitman Arm Stock Polished Pitman Arm Front Linkage Bracket $20.00* Plain Hi-Boy Four Bar Kit Stock Polished Hi-Boy Four Bar Kit $220.00* Plain 32 Front Radius Rod Kit (Through Hole) N/C Polished 32 Front Radius Rod Kit (Through Hole) $ Plain 32 Plain Front Viper Hair Pin Kit N/C Polished 32 Plain Front Viper Hair Pin Kit $ Speedway Front Wishbone- No Holes $60.00 Speedway Front Wishbone- with Holes $ Johnson s Plain Aluminum Radius Rod Kit (Round Hole) $ Johnson s Pol. Aluminum Radius Rod Kit (Round Hole) $ Johnson s Plain Aluminum Radius Rod Kit (Oval Hole) $ Johnson s Pol. Aluminum Radius Rod Kit (Oval Hole) $ Johnson s Plain Aluminum Radius Rod Kit (Oval Hole with Raised Lip) $ Johnson s Polished Aluminum Radius Rod Kit (Oval Hole with Raised Lip) $1, Johnson s Plain Aluminum Solid Dog Bone Kit $ Johnson s Polished Aluminum Solid Dog Bone Kit $ Johnson s Plain Aluminum Dog Bone Kit with Holes $ Johnson s Polished Aluminum Dog Bone Kit with Holes $ Shadow Rod Plain Wishbone Kit Engine Mounts $ Small Block Chevy without Air Stock Small Block Chevy with Air N/C Small Block Ford without Air N/C Small Block Ford with Air N/C Ford Flathead $ Big Block Chevy without Air $ Big Block Chevy with Air $ Big Block Ford without Air $ Big Block Ford with Air $ LS3 Motor Mount Center Crossmember $ Center X Member for Brake Pedal N/C Center X Member for Brake and Clutch Pedals N/C Continued to Next Page

41 Ford Model A Hi-Boy Chassis Option Guide Transmission Mounts Chevy 350 Turbo Stock Chevy 400 Turbo N/C Chevy 700R4 N/C Ford C-4 N/C Ford C-6 N/C Ford AOD N/C 1939 Ford N/C S-10 5 Speed N/C Tremac 5 Speed N/C Tremac 6 Speed N/C 4 Speed N/C 4L60 N/C 4L75 N/C 4L80 N/C Pedal and Bracket 34 Style Hi-Boy Brake Pedal Stock 34 Style Hi-Boy Clutch and Brake Pedal $ Style Hi-Boy Power Booster Brake Pedal Bracket Only $ Style Power Booster Brake Pedal Bracket Only N/C Front Brakes Econo GM Disc Brake Kit 5x4.5 -$ Econo GM Disc Brake Kit 5x4.75 -$ Wilwood Plain Front Brake Kit 4.5 & 4.75 Stock Wilwood Polished Front Brake Kit 4.5 & 4.75 $120.00* Wilwood Plain Front Brake Kit 4.5 & 4.75 $ with Drilled and Slotted Roters Wilwood Polished Front Brake Kit 4.5 & 4.75 $ with Drilled and Slotted Roters Plain So-Cal 50 Buick Front Brake Kit $ (Specify Bolt Pattern) Polished So-Cal 50 Buick Front Brake Kit $1, (Specify Bolt Pattern) Plain So-Cal Finned Front Brake Kit 4.5 & $ Plain Wilwood Disc Brake Kit 5x5.5 $ Polished Wilwood Disc Brake Kit 5x5.5 $ Lincoln Drum Brakes 5x5.5 $ Plain Kinmont Front Brakes 5x4.5 and 5x4.75 $1, Polished Kinmont Front Brakes 5x4.5 and 5x4.75 $2, Plain Kinmont Front Brakes 5x5.5 $1, Polished Kinmont Front Brakes 5x5.5 $2, Brake Line Kit Installed Kit for Drum Front and Rear $ Kit for Drum Front and Rear with Power Booster $ Kit for Front Disc and Drum Rear $ Kit for Front Disc and Drum Rear with Power Booster $ Kit for Front and Rear Disc Brakes $ Kit for Front and Rear Disc Brakes $ with Power Booster Kit for Wilwood Front and Rear Disc Brakes $ Kit for Wilwood Front and Rear Disc Brakes $ with Power Booster No Brake Lines Stock Rear Brakes Rear Drum Brakes 4.5 $ Rear Drum Brakes 4.75 $ Rear Drum Brakes 5.5 $ Plain Econno Rear Disc Brake Kit 4.5 and 4.75 $ Plain Rear Wilwood Disc Brake Kit 4.5 and 4.75 $ Polished Rear Wilwood Disc Brake Kit 4.5 and 4.75 $ Plain Rear Wilwood Disc Brakes with Drilled and $ Slotted Rotors 4.5 and 4.75 Polished Rear Wilwood Disc Brakes $1, with Drilled and Slotted Rotors 4.5 and 4.75 Plain Super Stopper Disc Brake Kit 5x5.5 $1, Polished Super Stopper Disc Brake Kit 5x5.5 $1, Lincoln Drum Brakes $1, No Rear Brakes Stock Rear Linkage Plain Rear TriLink Kit Stock Polished Rear TriLink Kit $225* Plain Rear Ladder Bar Kit $ Chrome Rear Ladder Bar Kit $ Rear Plain 4-Bar Kit $ Stainless Steel Rear 4-Bar Kit $ Plain Shadow Rod Ladder Bar Kit $ Johnson s Unpolished Aluminum Radius Rod Kit (Round Hole) $ Johnson s Pol. Aluminum Ladder Bar Kit (Round Hole) $1, Johnson s Plain Aluminum Ladder Bar Kit (Oval Hole) $ Johnson s Pol. Aluminum Ladder Bar Kit (Oval Hole) $1, Johnson s Unpolished Aluminum Ladder Bar Kit $1, (Oval Hole with Raised Lip) Johnson s Polished Aluminum Ladder Bar Kit $1, (Oval Hole with Raised Lip) Johnson s Plain Aluminum Solid Dog Bone Kit $ Johnson s Polished Aluminum Solid Dog Bone Kit $1, Johnson s Plain Aluminum Dog Bone Kit with Holes $ Johnson s Polished Aluminum Dog Bone Kit with Holes $1, Rear Panhard Bracket Plain Rear Panhard Bracket for 9 Rear End Stock Polished Rear Panhard Bracket for 9 Rear End N/C Plain Rear Panhard Bracket for 9 Housing N/C with Ladder Bar Housing Plain Rear Panhard Bracket for 9 Housing N/C with Ladder Bar Housing Plain Quick Change Rear End Panhard Bracket N/C Polished Quick Change Rear End Panhard Bracket N/C No Rear Panhard Bracket N/C Rear Crossmember Rear Square Tube Crossmember Setup for Coilovers Stock Model A Rear Crossmember and Spring $ Style Rear Crossmember and Spring $ Chrome Model A Rear Crossmember and Spring $1, Chrome 40 Style Rear Crossmember and Spring $1, Quickchange Rear Crossmember \$ Rear Coil Over Shocks Plain Rear Coil Over Shocks Stock Polished Rear Coil Over Shocks $60.00* Polished Ridetech Rear Coilover Shocks with Plain Bolts $ Plain Pete and Jake s Covered Shocks N/C Polished Pete and Jake s Covered Shocks N/C Ridetech Plain Shocks with Covers $ Ridetech Polished Shocks with Covers $ Rear Housing 50 Inch Housing (Specify Spline and Bolt Pattern) Stock 52 Inch Housing (Specify Spline and Bolt Pattern) N/C Winter s Quick Change Starts at $2, Center Section 9 Open Center Section (Specify Spline and Gear Ratio) $ Positrac Center Section $1, (Specify Spline and Gear Ratio) No Center Section Stock Body Mounts Body Mount Drilled $ No Body Mounts Drilled Stock CustomerService@BrookvilleRoadster.com

42 1932 Ford Chassis Option Guide Choose your Chassis on page 34. Use the sheet below to view what comes standard then you may customize to meet your needs with our upgrades. Upgrade pricing is additional to the cost found on page 34. Note: Stock means that the Option is included in the Price of the Chassis. An Asterisk (*) next to the price means it is included in the Stainless Steel Chassis package pricing on page 34 and Starter Package upgrade. Note Descriptions with Plain means Mild Steel Components.Descriptions with Polished means Polished Stainless Steel unless Otherwise Noted. Assembly Unassembled Chassis Stock Assemble Chassis to Roller Stage $ Front Crossmember Independent Crossmembers Include Suspension Model A Front Crossmember Stock TCI Independent Front Crossmember $ TCI Stainless Steel Independent Front Crossmember $ Heidt s Independent Front Crossmember $ Heidt s Stainless Steel Independent Front Crossmember $ Kugel Independent Front Crossmember $ Kugel Stainless Steel Independent Front Crossmember $ Flat Front Crossmember $50.00 Front Shock Mount Bracket Full Fender Front Shock Bracket Stock Headlight Shock Mount Combo Bracket N/C So-Cal F1 Bracket- Plain $ S0-Cal F1 Bracket- Stainless Steel $ So-Cal F1 Bracket (Hi-Boy Style)- Plain $ So-Cal F1 Bracket (Hi-Boy Style)- Stainless Steel $ Front Shocks Plain Front Shocks Stock Chrome Front Shocks $30.00* Polished Ridetech Front Shocks $ Front Spring Perches Plain Front Spring Perches Stock Polished Front Spring Perches $50.00* Lower Shock Mounts Plain Lower Shock Mounts Stock Polished Lower Shock Mounts $20.00* Dropped Front Axle 46 4 Dropped Plain Tube Axle Stock 46 4 Dropped Chrome Tube Axle $250.00* 46 4 Dropped Plain I-Beam Axle N/C 46 4 Dropped Chrome I-Beam Axle $ Dropped Plain I-Beam Axle N/C 47 4 Dropped Chrome I-Beam Axle $ Dropped Plain Drilled I-Beam Axle $ Dropped Chrome Drilled I-Beam Axle $ Dropped Plain Drilled I-Beam Axle $ Dropped Chrome Drilled I-Beam Axle $ Dropped Plain I-Beam Axle $ Dropped Chrome I-Beam Axle $ Spindle Nut and Washer Plain Spindles with Nut and Washers Stock Polished Spindles with Nut and Washers $260.00* Spring U-Bolt Plain U-Bolt Stock Chrome U-Bolt $40.00* Front Spring and Clamps Plain Multi-Leaf Spring with Reversed Eye Stock with Stainless Steel Clamps Chrome Multi-Leaf Spring with Reversed Eye $200.00* with Stainless Steel Clamps Plain Mono-Leaf Spring N/C Chrome Mono-Leaf Spring $ Spring Shackles Plain Front Spring Shackles Stock Polished Front Spring Shackles $30.00* 42 Lower Steering Arms Plain Lower Steering Arms Stock Polished Lower Steering Arms $50.00* Johnson s Polished Steering Kit $ Plain Lower Steering Arms for Wishbones N/C Polished Lower Steering Arms for Wishbones $ Plain Lower Steering Arms for 5 Drop Axle $35.00 No Lower Steering Arms Tie Rod and Drag Link $ Plain Tie Rod and Drag Link Stock Chrome Tie Rod and Drag Link $150.00* Included in Above Johnson s Polished Steering Kit N/C Front Panhard Bar Bracket Plain Front Panhard Stock Polished Front Panhard Steering Box $80.00* Vega Steering Box Stock Mavel Unisteer Kit $ Flaming River Vega Steering Box Vega Pitman Arm $ Plain Pitman Arm Stock Polished Pitman Arm Front Linkage Bracket $20.00* Plain Hi-Boy Four Bar Kit Stock Polished Hi-Boy Four Bar Kit $200.00* Plain 32 Front Radius Rod Kit (Through Hole) N/C Polished 32 Front Radius Rod Kit (Through Hole) $ Plain 32 Plain Front Viper Hair Pin Kit N/C Polished 32 Plain Front Viper Hair Pin Kit $ Speedway Front Wishbone- No Holes $60.00 Speedway Front Wishbone- with Holes $ Johnson s Plain Aluminum Radius Rod Kit (Round Hole) $ Johnson s Pol. Aluminum Radius Rod Kit (Round Hole) $ Johnson s Plain Aluminum Radius Rod Kit (Oval Hole) $ Johnson s Pol. Aluminum Radius Rod Kit (Oval Hole) $ Johnson s Plain Aluminum Radius Rod Kit (Oval Hole with Raised Lip) $ Johnson s Polished Aluminum Radius Rod Kit (Oval Hole with Raised Lip) $1, Johnson s Plain Aluminum Solid Dog Bone Kit $ Johnson s Polished Aluminum Solid Dog Bone Kit $ Johnson s Plain Aluminum Dog Bone Kit with Holes $ Johnson s Polished Aluminum Dog Bone Kit with Holes $ Shadow Rod Plain Wishbone Kit Engine Mounts $ Small Block Chevy without Air Stock Small Block Chevy with Air N/C Small Block Ford without Air N/C Small Block Ford with Air N/C Ford Flathead $ Big Block Chevy without Air $ Big Block Chevy with Air $ Big Block Ford without Air $ Big Block Ford with Air $ LS3 Motor Mount Center Crossmember $ Center X Member for Brake Pedal N/C Center X Member for Brake and Clutch Pedals Spreader Bar N/C Stainless Steel Front and Rear Spreader Bar $ Plain Front and Rear Spreader Bar $ No Spreader Bar Stock Continued to Next Page

43 1932 Ford Chassis Option Guide Transmission Mounts Chevy 350 Turbo Stock Chevy 400 Turbo N/C Chevy 700R4 N/C Ford C-4 N/C Ford C-6 N/C Ford AOD N/C 1939 Ford N/C S-10 5 Speed N/C Tremac 5 Speed N/C Tremac 6 Speed N/C 4 Speed N/C 4L60 N/C 4L75 N/C 4L80 N/C No Transmission Mount -$ Pedal and Bracket 32 Brake Pedal Stock 32 Clutch and Brake Pedal $ Power Booster Brake Pedal Bracket Only $ Front Brakes Econo GM Disc Brake Kit 5x4.5 -$ Econo GM Disc Brake Kit 5x4.75 -$ Wilwood Plain Front Brake Kit 4.5 & 4.75 Stock Wilwood Polished Front Brake Kit 4.5 & 4.75 $ Wilwood Plain Front Brake Kit 4.5 & 4.75 $ with Drilled and Slotted Roters Wilwood Polished Front Brake Kit 4.5 & 4.75 $ with Drilled and Slotted Roters Plain So-Cal 50 Buick Front Brake Kit $ (Specify Bolt Pattern) Polished So-Cal 50 Buick Front Brake Kit $1, (Specify Bolt Pattern) Plain So-Cal Finned Front Brake Kit 4.5 & $ Plain Wilwood Disc Brake Kit 5x5.5 $ Polished Wilwood Disc Brake Kit 5x5.5 $ Lincoln Drum Brakes 5x5.5 $ Plain Kinmont Front Brakes 5x4.5 and 5x4.75 $1, Polished Kinmont Front Brakes 5x4.5 and 5x4.75 $2, Plain Kinmont Front Brakes 5x5.5 $1, Polished Kinmont Front Brakes 5x5.5 $2, Brake Lines Kit for Drum Front and Rear $ Kit for Drum Front and Rear with Power Booster $ Kit for Front Disc Drum Rear $ Kit for Front Disc Drum Rear with Power Booster $ Kit for Front and Rear Disc Brakes $ Kit for Front and Rear Disc Brakes $ with Power Booster Kit for Wilwood Front and Rear Disc Brakes $ Kit for Wilwood Front and Rear Disc Brakes $ with Power Booster No Brake Lines Stock Rear Brakes Rear Drum Brakes 4.5 $ Rear Drum Brakes 4.75 $ Rear Drum Brakes 5.5 $ Plain Econno Rear Disc Brake Kit 4.5 and 4.75 $ Plain Rear Wilwood Disc Brake Kit 4.5 and 4.75 $ Polished Rear Wilwood Disc Brake Kit 4.5 and 4.75 $ Plain Rear Wilwood Disc Brakes with Drilled and $ Slotted Rotors 4.5 and 4.75 Polished Rear Wilwood Disc Brakes with Drilled and Slotted Rotors 4.5 and 4.75 $1, Plain Super Stopper Disc Brake Kit 5x5.5 $1, Polished Super Stopper Disc Brake Kit 5x5.5 $1, Lincoln Drum Brakes $1, No Rear Brakes Stock Rear Linkage Plain Rear TriLink Kit Stock Polished Rear TriLink Kit $225* Plain Rear Ladder Bar Kit $ Chrome Rear Ladder Bar Kit $ Rear Plain 4-Bar Kit $ Stainless Steel Rear 4-Bar Kit $ Plain Shadow Rod Ladder Bar Kit $ Johnson s Unpolished Aluminum Radius Rod Kit (Round Hole) $ Johnson s Pol. Aluminum Ladder Bar Kit (Round Hole) $1, Johnson s Plain Aluminum Ladder Bar Kit (Oval Hole) $ Johnson s Pol. Aluminum Ladder Bar Kit (Oval Hole) $1, Johnson s Unpolished Aluminum Ladder Bar Kit $1, (Oval Hole with Raised Lip) Johnson s Polished Aluminum Ladder Bar Kit $1, (Oval Hole with Raised Lip) Johnson s Plain Aluminum Solid Dog Bone Kit $ Johnson s Polished Aluminum Solid Dog Bone Kit $1, Johnson s Plain Aluminum Dog Bone Kit with Holes $ Johnson s Polished Aluminum Dog Bone Kit with Holes $1, Rear Panhard Bracket Plain Rear Panhard Bracket for 9 Rear End Stock Polished Rear Panhard Bracket for 9 Rear End N/C Plain Rear Panhard Bracket for 9 Housing N/C with Ladder Bar Housing Plain Rear Panhard Bracket for 9 Housing N/C with Ladder Bar Housing Plain Quick Change Rear End Panhard Bracket N/C Polished Quick Change Rear End Panhard Bracket N/C No Rear Panhard Bracket N/C Rear Crossmember Rear Square Tube Crossmember Setup for Coilovers Stock Model A Rear Crossmember and Spring $ Style Rear Crossmember and Spring $ Chrome Model A Rear Crossmember and Spring $1, Chrome 40 Style Rear Crossmember and Spring $1, Quickchange Rear Crossmember $ Rear Coil Over Shocks Plain Rear Coil Over Shocks Stock Polished Rear Coil Over Shocks $60.00* Polished Ridetech Rear Coilover Shocks with Plain Bolts $ Plain Pete and Jake s Covered Shocks N/C Polished Pete and Jake s Covered Shocks N/C Ridetech Plain Shocks with Covers $ Ridetech Polished Shocks with Covers $ Rear Housing 50 Inch Housing (Specify Spline and Bolt Pattern) Stock 52 Inch Housing (Specify Spline and Bolt Pattern) N/C Winter s Quick Change Starts at $2, Center Section (Specify Spline and Gear Ratio) 9 Open Center Section $ Positrac Center Section $1, No Center Section Stock Gas Tank 32 Stock Gas Tank Installed $ Deep Gas Tank Installed $ No Gas Tank Installed Stock Body Mounts Body Mounts Drilled $ No Body Mounts Drilled Stock CustomerService@BrookvilleRoadster.com

44 Frame and Chassis Components We offer all of our optional and standard components individually for people who may want to order their frame with specific items or who may be building their own frame and need these components for completion. The prices are for parts and do not include installation or welding. Front End Components Mild Steel Chrome Stainless AB-526-CF Front Parallel 4 Link Cross Steer $ $ AB-526-BK12 Front 4 Link Bolt Kit, 1/2" $45.00 AB-526-BK916 Front 4 Link Bolt Kit, 9/16" $45.00 $60.00 AB-527-HPK Model A Hairpin Kit $ $ AB-528-CF Front Panhard Kit $ $ AB-529-CF Lower Shock Mounts $67.00 $ AB-531-CFB Full Fender Plain Front Upper Shock Bolt Kit $5.00 AB-531-CFSSB Full Fender Chromed Front Upper Shock Bolt Kit $10.00 AB-531-CF Front Shocks $65.00 $95.00 AB-531-CFPRT RideTech Polished Front Shocks (no covers) $ pr AB-531-CFPRTWC RideTech Polished Front Shocks (with covers) $ pr AB-532-CF 46 Tube Axle $ $ AB-532-CFI 46 I-Beam Axle $ $ AB-532-CFSI 46 Superbell Plain Drilled I-Beam $ AB-532-CFSICH 46 Superbell Chrome Drilled I-Beam $ AB-532-CF47SC 47 So-Cal I-Beam Axle $ $ AB-532-CFID47SC 47 So-Cal I-Beam Axle Drilled $ $ AB-526-BW Batwings for 2-1/4 Boss Axle $ $ SS $ P/SS AB-534-CF Posie Super Slide Spring with Reversed Eyes $ $ AB-534-CFM Mono Leaf Spring $ $ AB-536-CF 1-3/4 Spring Shackles $40.00 $70.00 AB-538-CF Spring Perches $80.00 $ AB-540-CF Ford Spindles with Fitted Bearings and King Pins $ $ $ AB-542-CF King Pin Kit $50.00 $ AB-542-CFB Stainless Steel King Pin Bearings Only $25.00 AB-542-SS Stainless Steel King Pin Spindle Stop (pair) $46.00 AB-544-CF Seamless Tube Tie Rod with Ford Ends & Jam Nuts $95.00 $ AB-546-CF Drag Link Rod with Ford Ends $95.00 $ AB-548-CF Lower Steering Arms $ $ AB-550-CF Spring U-Bolt Kit $45.00 $80.00 AB-552-CF 1-3/4 Polished Stainless Spring Clamps $35.00 AB-554-CF Vega Steering Gear Box (new) $ AB-556-CFP Vega Pitman Arm (stainless, polished) $95.00 AB-556-CF Vega Pitman Arm (stainless, unpolished) $ Maval Unisteer Rack&Pinion Kit w/15 Plain Draglink $ Maval Unisteer Rack&Pinion Kit w/15 Chrome Draglink $ AB-558-CF Spindle Nuts & Washer Kit $20.00 AB-521-CD Dual Clutch, Brake Pedal & Bracket $ So-Cal Finned Front Disc Brake Kit $ AP Super Stopper Front Disc Brake Kit 360 Plates Polished $ AFP Super Stopper Front Disc Brake Kit Finned Plates Polished $ AF-572-CF #4450 Mopar Disc Brake Kit $ AF-574-CF Mopar Rotors 4-1/2 B.C. $ AF-576-CF 78-Up GM Calipers $85.00 AF-578-CF Caliper Pads $40.00 AF-580-CF Caliper Bolts $25.00 AF-582-CF Inner & Outer Bearings $35.00 AB-528-HPK Hi-Boy Hairpin kit $ $ AB-526-BK12 Front 4 Link Bolt Kit - 1/2 $45.00 AB-526-BK916 Front 4 Link Bolt Kit - 9/16 $45.00 $60.00 AB-512-CH Front Weld On Headlight & Shock Combo Brackets $65.00 pr AB-606-CR 34 Style Bolt-On Brake Pedal & Bracket $ ea AB-606-CRD 34 Style Bolt-On Brake & Clutch Pedal with Bracket $ ea Wilwood Front Disc Kit with 360 Plates - plain $ P Wilwood Front Disc Kit with 360 Plates - polished $ Front Suspension Package Options Mild Steel Chrome/Stainless AB-750-TCIP T.C.I. IFS Front Suspension System (with sway bar) $ AB-750-TCISS $ AB-750-HS Heidt s IFS Front Suspension System (with sway bar) $ AB-750-HSCH $ AB-750-DFEMS Dropped Front Suspension System (Vega Box and Pitman Arm Not Included) $ AB-750-DFESS $ AB-750-DFEMSSC SoCal Dropped Front End Kit (Specify 4-Bar or Hairpin) (Vega Box and Pitman Arm Not Included) $ AB-750-DFEMSHB Dropped Front Suspension System with Wilwood Front Disc Brake Kit (Vega Box and Pittman Arm Not Included) $ AB-750-DFESSHB $ Several Complete Front Suspension Packages Are Available 32 Front Frame Horns Model ABolt-on Brake Pedal & Bracket 32 Rear Frame Horns

45 Frame and Chassis Components Front Suspension Package Options (Continued) Mild Steel Chrome/Stainless B-750-TCIP 32 T.C.I. IFS Front Suspension System (with sway bar) $ B-750-TCISS $ B-750-HS 32 Heidt s IFS Front Suspension System (with sway bar) $ B-750-HSCH $ B-750-DFEMS 32 Dropped Front Suspension System with Wilwood Front Disc Brake Kit (Vega box and pittman arm not included) $ B-750-DFESS $ Rear End Brackets and Components Mild Steel Chrome Stainless AB-562-CR 9 Ford Rear End Assembly $ AB-608-WQR Winters Plain Quick-Change Rear End $3, AB-608-WQRP Winters Polished Quick-Change Rear End $3, (Polished) Plain Rear Ladder Bar Kit $ C Chrome Rear Ladder Bar Kit $ AB-560-CR Rear Parallel 4 Link Kit $ $ AB-566-CRRT RideTech Plain Rear Coilovers with 175# Blue Springs $ pr AB-566-CRPRT RideTech Polished Rear Coilovers with 175# Blue Springs $ pr AB-566-CRPRT RideTech Polished Rear Coilovers with 175# Chrome Springs $ pr AB-566-CR All American Rear Coil-Over Shocks w/black Springs $ (Add $175 for Chrome Springs) AB-566-CR-CH All American Chrome Rear Coil-Over Shocks w/black Springs $ (Add $175 for Chrome Springs) AB-568-CR Rear Panhard Bar Kit $ $ AB-570-CR Rear Coil-Over Bolt Pack $38.00 $60.00 AB-608-CR 9 Ford Housing with Axles (narrowed) $ Plain Rear Ladder Bar Kit $ C 32 Chrome Rear Ladder Bar Kit $ AH-522-CR Rear Triangulated Axle Brackets (welds onto rear end) $ pr Rear Suspension Brackets and Components Mild Steel Chrome Stainless B-514-C 32 Rear Triangulated Brackets only $65.00 pr B-604-CR 32 Rear Triangulated 4 Link Kit $ $ B-570-CR 32 Rear Coil-Over Bolt Pack $38.00 $60.00 Transmission Mount Rear Four Bar Axle Bracket Front Parallel 4 Link Cross Steer Frame Brackets and Components AB-502-C Engine Mounting Kit (round biscuit style- specify Ford, Chevy, or Flathead) $99.00 set AB-504-C Transmission Mount (cradle style - specify trans type) $ AB-506-CF Front Parallel 4 Link Cross Steer (brackets only) $68.00 pr AB-508-CF Vega Steering Bracket with Gusset $49.00 AB-510-CF Front Panhard Frame (bracket only) $45.00 AB-512-CF Front Weld-On Shock Brackets $49.00 pr AB-513-FSKP Weld-On/Bolt-On Full Fender Plain Front Shock Kit $ kit AB-513-FSKPSS Weld-On/Bolt-On Full Fender Stainless Front Shock Kit $ kit AB-513-FSKHBP Weld-On/Bolt-On Hi-Boy Plain Front Shock Kit $ kit AB-513-FSKHBSSWeld-On/Bolt-On Hi-Boy Stainless Front Shock Kit $ kit AB-514-CR Rear Parallel 4 Link (brackets only) $68.00 pr AB-516-CR Rear Upper Coil-Over Shock Mounts $69.00 pr AB-518-CR Rear Panhard Frame Bracket $23.00 AB-520-C Brake Pedal and Bracket $ AB-522-C Rear Parallel Axle Brackets (For welding to rear end housing) $ pr # Body to Frame Bolt Kit $8.00 kit B5000BS Body to Frame Webbing $25.00 B Rear Frame Horns $95.00 pr B-158-FRONT 32 Front Frame Horns $ Frame Rails B660R 32 Style Frame Rails $ pr B-660-BP Boxing Plates For ASC 32 Rails $ set B660R-S Shadow Rods Frame Rails with C-Notch $ pr B-660-BP Boxing Plates For Shadow Rods 32 Rails $ set B660K 34 Style Center Cross Member For Brake Pedal $ B660KC 34 Style Center Cross Member For Brake & Clutch Pedals $ B660SQ Square Tube Rear Crossmember $60.00 Rear Four Bar Axle Bracket Hi-Boy Shock Mounts Vega Steering Bracket Model A Front Crossmember Front Weld-On Shock Bracket B-504-C 32 Transmission Mount (cradle style) specify trans type $ B-506-C 32 Front 4 Link Brackets $65.00 pr B-512-CH 32 Front Weld On Headlight & Shock Combo Brackets $65.00 pr B-526-CF 32 Front Parallel 4 Link Cross Steer kit $ $ B-528-HPK 32 Full Fendered Hairpin Kit $ $ B-606-CR 34 Style Bolt-On Brake Pedal & Bracket for 32 Frame $ ea B-606-CRD 34 Style Bolt-On Brake & Clutch Pedal with Bracket for 32 Frame $ ea Ford Engine Mounting Kit Model A Front Crossmember AB-576-CF Stamped 3/16 Steel Drops A Front End 3/8 Accepts Walker Radiator Mounting Bolts $85.00 Hood Mounting Brackets A-507-CF Hood and Cowl Mounting Brackets Mount To Frame (Set of 4) $45.00 A-507-CFH Hood Mounting Brackets $20.00 pr A-507-CFC Cowl Mounting Brackets $30.00 pr Hood Mounting Brackets CustomerService@BrookvilleRoadster.com

46 Frame and Chassis Parts Don t See a Chassis Part? We Are Dealers For The Top Manufacturers Of Chassis & Suspension Components If you are considering one of our Starter Kits we can include almost any optional chassis component from one of these fine manufacturers. Call our tech staff to discuss options. We can also order any part that you may need for your project as well. 46 Every street rod is unique and we can help you tailor your project with any chassis component directly or as an option on your Brookville Starter Kit

47 Complete Brake Line Kits These are the brake line kits we install as an option on our Model A, Hi-Boy and Deuce Chassis Kits. Brake Lines and Components Full-Fendered Model A Brake Line Kits For GM Front Disc and Ford Rear Drum Brakes Includes: 3 pcs AB-605-BKSL 12 AB-610-BK LC 1 AB-600-BK PS 2 AB-601-BK T 2 AB-625-BK PN 2 AB-602-BK 90 1 AB-613-BK PV 2 AB-619-BK TS 1 AB-614-BK CV 2 AB-621-BK TN 1 AB-616-BK SS 4 AB-617-BK FF 2 AB-651-BKBL MC AB-650-BKBANJO 2 AB-650-BB 4 AB-650-SS pair 1 TN-01 3/8-24 LINE NUT 1 TN-06 7/16-24 LINE NUT Complete Unpolished Stainless Steel Line Kit AB-6000-BK $ Call for a quote on line kits for other brake combinations AB-617-BK FF MC AB-614-BK CV AB-601-BK T AB-602-BK 90 AB-651-BKBL9090 AB-617-BK FF AB-605-BKSL AB-600-BK PS and 1932 Hi-Boy Brake Line Kits For Wilwood Front Disc and Ford Rear Drum Brakes Includes: 4 pcs AB-605-BKSL 12 AB-610-BK LC 1 AB-600-BK PS 1 AB-601-BK T 4 AB-625-BK PN 1 AB-602-BK 90 1 AB-613-BK PV 1 AB-614-BK CV 1 AB-616-BK SS 2 AB-617-BK FF 1 AB-630-BK 90 1 AB-631-BK T 1 MC AB-651-BKBL90 2 AB-651-BKBL pair 1 TN-01 3/8-24 LINE NUT 1 TN-06 7/16-24 LINE NUT Complete Unpolished Stainless Steel Line Kit AB-6001-BK $ AB-601-BK T AB-617-BK FF AB-651-BKBL9090 AB-616-BK SS AB-602-BK 90 AB-613-BK PV Assorted Aluminum A.N. to A.N. Adapter Fittings AB-617-BK FF AB-618-BK TS Size 3 Tube Sleeves for 3/16" Line $2.25 ea AB-619-BK TS Size 4 Tube Sleeves for 1/4" Line $2.25 ea AB-620-BK TS Size 6 Tube Sleeves for 3/8" Line $2.25 ea AB-621-BK TN Size 3 Tube Nut for 3/16" Line $2.25 ea AB-622-BK TN Size 4 Tube Nut for 1/4" Line $2.25 ea AB-623-BK TN Size 6 Tube Nut for 3/8" Line $2.25 ea AB-636-BK BAN Size 3 Bulk Head Nut $3.00 ea AB-624-BK PN 1/8" Pipe Nipples $4.50 ea AB-625-BK PN 1/8" Pipe Nipples for 3 A.N. Fittings $3.50 ea to 3/8-24 IF Short Wheel Cylinder Adapter $10.00 pr CustomerService@BrookvilleRoadster.com

48 Brake Line Kits and Components An Investment In Precision Quality Master Cylinders MC36445 Ford Dual Reservoir Master Cylinder (Front Disc Brakes with Rear Drums) $70.00 MC36367 Ford Dual Reservoir Master Cylinder (4-Wheel Disc Brakes) $ MC36222 Ford Dual Reservoir Master Cylinder (4-Wheel Drum Brakes) $ AB-642 CMC Wilwood Clutch Master Cylinder $65.00 Residual Check Valve AB-614-BK CV 2 Pound Residual Check Valve Used with Rear Disc Brakes $29.00 AB-615-BK CV 10 Pound Residual Check Valve Used with Drum Rear Brakes $29.00 Proportioning Brake Valve AB-613-BK PV Wilwood Proportioning Brake Valve $59.00 Frame Fittings AB-617-BK FF Through the Frame Fittings $39.00 pr Stoplight Switch AB-616-BK SS Stainless Steel Stoplight Switch $22.00 AB-616-BK SS PT Stoplight Switch Pigtail $8.00 AB-616-BK SS K Stainless Steel Stoplight Switch with Pigtail Kit $29.00 kit Stainless Steel Lines AB-605-BK SL Unpolished Brake Line, 3/16" (6 Foot Lengths) $35.00 AB-607-BK SL Unpolished Brake Line, 1/4" (6 Foot Lengths) $42.00 AB-609-BK SL Unpolished Brake Line, 3/8" (6 Foot Lengths) $49.00 Pre-Bent Stainless Steel Lines AB-605-PBMA2 Pre-Bent Brake Lines for Model A Frame with 2 Kick up using Manual Brakes $ AB-605-PBPA2 Pre-Bent Brake Lines for Model A Frame with 2 Kick up using Power Brakes $ AB-605-PBMHB28 Pre-Bent Brake Lines for Hi-Boy Frame using Manual Brakes $ AB-605-PBPHB28 Pre-Bent Brake Lines for Hi-Boy Frame using Power Brakes $ AB-605-PBMHB30 Pre-Bent Brake Lines for Hi-Boy Frame using Manual Brakes $ AB-605-PBPHB30 Pre-Bent Brake Lines for Hi-Boy Frame using Power Brakes $ AB-605-PBM32 Pre-Bent Brake Lines for 32 Frame using Manual Brakes $ AB-605-PBP32 Pre-Bent Brake Lines for 32 Frame using Power Brakes $ Stainless Steel Braided Brake Lines AB-650-BK BL 12" Long - Straight Both Ends $22.00 AB-651-BK BL 14" Long - Straight Both Ends $24.00 AB-650-BK BL90 12" Long - Straight End and 90 Degree End $24.00 AB-651-BK BL90 14" Long - Straight End and 90 Degree End $26.00 AB-650-BK BLBANJO 12" Long - Straight End and Banjo End $24.00 AB-651-BK BLBANJO 14" Long - Straight End and Banjo End $26.00 AB-650-BK BL " Long - 90 Degree To Inverted 90 Degree Ends $24.00 AB-651-BK BL " Long - 90 Degree To Inverted 90 Degree Ends $24.00 AB-651-BK BL " Long - 90 Degree To Inverted 90 Degree Ends $24.00 AB-650-BB Banjo Bolts $6.00 AB-650-SS Strato Seals $6.00 Aluminum Line Clamps AB-610-BK LC Aluminum Line Clamps 3/16" $3.00 AB-611-BK LC Aluminum Line Clamps 1/4" $3.00 AB-612-BK LC Aluminum Line Clamps 3/8" $3.00 Bulkhead T-Fitting AB-631-BK T Bulkhead T-Fitting (1/8" Pipe Thread to 3 A.N. Fitting) with 2 Tube Nuts, 2 Tube Sleeves & 1 Bulkhead Nut $35.00 T-Fittings AB-600-BK PS T-Fitting with two 1/8" pipe nipples (used for mounting stoplight switch) $29.00 AB-601-BK T T-Fitting (1/8" Pipe to 3 A.N.) with 2 tube sleeves & 2 tube nuts $ Bulkhead Fitting AB-630-BK Degree Bulkhead Fitting (1/8" Pipe thread to 3 A.N. Fitting) with 1 Tube Sleeve, 1 Tube Nut & 1 Bulkhead Nut $ Fitting AB-602-BK Degree Fitting (1/8" pipe thread to 3 A.N. Fitting) with 1 Tube Sleeve & 1 Tube Nut $23.00 Aluminum Rear End Vent AB-700-CRV Polished Aluminum Vent Threads Into Rear End Housing (7/16 x 20 thread) $

49 Labor Charges On each option listing and on some part number listings we provide installation of the part where noted (installed). These labor charges are additional to the parts or component pricing in each section listed below. If you have questions please call our tech rep. Interior Hardware A-137-L Steel Front Floor Pan for Non-Recessed Firewall $ A-137-RL Steel Front Floor Pan for Recessed Firewall $ AB-193-BL Cut Out for Shifter & Brake Handle $ AB-194-BL Trans Humps on our kit cars only $ Hoods and Components A L 3-Piece with Hidden Hinge & Latch Assembly with built in stiffeners (inquire for other styles) $3, Grille Shells B-1620-PL Fit 32 Insert into Grille Shell $ Chassis and Accessories for Full Fender Rods AB-526-CFL Front Parallel 4 Link Cross Steer, brackets only, welded on & ground $60.00 AF-530-CFL Front Weld-On / Bolt-On Shock Kit, welded on frame $65.00 AB-542-CFL Labor to fit Pins to Spindles $40.00 AF-561-CRL Rear Axle Brackets welded on rear end $65.00 AB-518-CRL Rear Panhard Bar Frame Bracket, welded on $35.00 AB-400-CL Assembly of total body package $15, AB-401-CL Assembly of chassis, ready to accept wheels & tires $ Labor Charges for Hi-Boy Chassis AH-600-CL Locate & place body mounts $ AH-602-CFL Front Shock with Hi-boy Mounts, welded on $30.00 AH-604-CRL Rear Triangulated 4 Link Brackets, welded on $65.00 This Deuce Was Built By JHRS For Angie Johnson CustomerService@BrookvilleRoadster.com

50 Finishing Components Grilles, Shells and Cooling Options Model A Style Grille Shells A-1620-SC Smooth Chrome Grille Shell $ A-1620-A Stock Chrome Grille Shell $ A-1620-ASM Smooth Plain Steel Grille Shell $ Grille Shells and Inserts B Grille Shell, Filled Top, Steel $ B-1620-INST WOH 32 Stainless Steel Grille Insert without Crankhole (Import) $ B-1620-INST WH 32 Stainless Steel Grille Insert with Crankhole (Import) $ B-1620-PT 32 Grille Shell with Insert without Crankhole (Import) $ B-1620-PT W/H 32 Grille Shell with Insert with Crankhole (Import) $ B-1620-STOCKONLY 32 Stock Grille Shell Only $ B-1620-STOCK 32 Stock Style Grille Shell with Stock Bezel, Radiator Cap & Ford Porcelain Emblem (fitted to grille shell) (USA Made) $ B-1620-STOCKPT 32 Stock Style Grille Shell with Stock Bezel, Radiator Cap & Ford Porcelain Emblem & Grille Shell Insert without Crank Hole (Import) $ B-1620-STOCKPT W/H 32 Stock Style Grille Shell with Stock Bezel, Radiator Cap & Ford Porcelain Emblem & Grille Shell Insert with Crank Hole (Import) $ B-1620-PTF 32 Grille Shell with Insert without Crankhole Fitted $ B-1620-PTWHF 32 Grille Shell with Insert with Crankhole Fitted $ B-1620-STOCKPTF 32 Stock Style Grille Shell with Stock Bezel, Radiator Cap & Ford B-1620-STOCKPTWHF Porcelain Emblem & Grille Shell Insert without Crank Hole Fitted $ Stock Style Grille Shell with Stock Bezel, Radiator Cap & Ford Porcelain Emblem & Grille Shell Insert with Crank Hole Fitted $ B-1620-PL Labor to Install Insert into Grille Shell $ B Stock Radiator Shell Emblem (Vintique) $30.00 B Stock Radiator Shell Bezel $ Trim for Radiator Shell (Vintique) $65.00 TRIM CRATE Crating charge for above radiator shell trim (freight charges not included) $20.00 A-8212-A Radiator Shell Ford Emblem $25.00 A-8212-B 31 Radiator Shell Ford Emblem $ So-Cal Bull Nose without Emblem (purchases B-8212 for emblem) $60.00 Stone Guards A A Stainless Steel Grille Shell Stone Guard $ A B 30 Stainless Steel Grille Shell Stone Guard $ A C 31 Stainless Steel Grille Shell Stone Guard $ Radiator Aprons A-115-A Radiator Splash Apron $75.00 A-115-B Radiator Splash Apron $75.00 A-115-ACH Chopped Radiator Splash Apron $75.00 A-115-BCH Chopped Radiator Splash Apron $75.00 A-115-B Radiator Splash Apron to Fit 32 Grille Shell $80.00 B Stock Height Radiator Splash Apron Made by Brookville Roadster $ B-132-CH 32 Chopped Height Radiator Splash Apron $80.00 Radiator Mounting Components A-1630 AB Rods Radiator Support Rods, Stainless Steel $40.00 pr 1630-Brackets Firewall Radiator Support Rod Brackets $16.00 pr A-1630-MOUNT Radiator Mounting Kit $12.00 kit A-1630-MOUNTSS Stainless Steel Radiator Mounting Kit $16.00 kit B-1630 Rods Stainless Steel Radiator Support Rods $40.00 Radiator Caps A-8100A SS Radiator Cap for Stock Radiator $25.00 A-8100C SS Radiator Cap for Stock Radiator $25.00 B Chrome Radiator Cap $35.00 B-8100-Q32 32 Radiator Cap with Quail Ornament $65.00 Over Flow Tanks A-1630-OT13 13" Stainless Steel Over Flow Tank $62.00 A-1630-OT15 15" Stainless Steel Over Flow Tank $ Grille Shell Filled 32 Grille Insert with Crankhole A-115-B32 A-115-B 29 Smooth Steel Grille Shell 32 Grille Shell with Stock Bezel Bob Drake Style Bull Nose Stainless Steel Over Flow Tank Radiator for Model A (Z Series) A-115-A

51 Finishing Components Grilles, Shells and Cooling Options (Continued) Cooling Components Fans, Shrouds and Relays (Call for Other Years) CCI Car and Truck Electric Fan and Shroud $ CCI Car and Truck Electric Fan and Shroud $ (Gives additional clearance at water pump /4 H x 18-1/2 W) CCI Car and Truck Electric Fan and Shroud $ (Needs at least 2-5/8 motor clearance - 22 H x 18-1/2 W) FR70 70 Amp Fan Relay $75.00 DFR40/40 40/40 Amp Dual Speed Fan Controller $91.00 Radiators For Brookville Applications (Call for Other Years) Z Z Series Model A Radiator for Chevy engine $ BZ Z Series Model A Radiator for Ford engine $ ZAC Z Series Model A Radiator with a/c for Chevy engine $1, BZAC Z Series Model A Radiator with a/c for Ford engine $1, Z Z Series 32 Style Radiator for Chevy engine $ (3 chopped for Hi-Boy) Also works for 32 Chevy Engines BZ Z Series 32 Style Radiator for Ford engine $ (3 chopped for Hi-Boy) Z Z Series Model A Radiator for Chevy engine $ BZ Z Series Model A Radiator for Ford engine $ ZAC Z Series Model A Radiator with a/c for Chevy engine $1, BZAC Z Series Model A Radiator with a/c for Ford engine $1, Z Z Series 32 Style Radiator for Chevy engine $ (2 chopped for Hi-Boy) Also works for 32 Chevy Engines BZ Z Series 32 Style Radiator for Ford engine $ (2 chopped for Hi-Boy) Z Z Series Radiator for Chevy engine $ BZ Z Series Radiator for Ford engine $ ZAC Z Series Radiator with a/c for Chevy engine $1, BZAC Z Series Radiator with a/c for Ford engine $1, ZAC Z Series Radiator for Chopped 2 with a/c for Chevy engine $1, ZAC Z Series Radiator for Chopped 3 with a/c for Chevy engine $1, FHZ Z Series Radiator for 48-Early V8 Flathead (1-3/4 outlets on top) $ FHZ Z Series Radiator for 53-Later V8 Flathead (1-1/4 outlets on top) $ Walker radiators are the standard for the street rodding hobby. Available in several cooling capacity levels and with integral air conditioning condensers for closed cars as well. Stock Style 4 Piece Hood With 3 Row Louvers Hoods and Hood Components Stock Style 4-Piece Hoods Piece Stock Hood $ Piece Stock Hood $ A ABHR Stainless Front Hood Hinge Retainer $9.00 A C Rear Chrome Hood Hinge Retainer $10.00 A BSHM Stock Hood Mounting Kit $18.00 kit Model A Four Piece Hoods with 32 Style Center Hinge (Available with your choice of Side Panels) Four Piece Stock Side Panels with 32 Center Hinge $ Four Piece 3-Row Louver Side Panels with 32 Center Hinge $ Four Piece Plain Side Panels with 32 Center Hinge $ A A-MOUNT Four Piece Hood with 32 Centerstrip Mounting Kit $ Model A Four Piece Hoods with 32 Style Center Hinge (Available with your choice of Side Panels) Four Piece Stock Side Panels with 32 Center Hinge $ Four Piece 3-Row Louver Side Panels with 32 Center Hinge $ Four Piece 4-Row Louver Side Panels with 32 Center Hinge $ A Four Piece Plain Side Panels with 32 Center Hinge $ A B MOUNT Four Piece Hood with 32 Centerstrip Mounting Kit $45.00 Stock Side Panel CustomerService@BrookvilleRoadster.com

52 Finishing Components Hoods and Hood Components (Continued) 32 Hoods 4-Piece Hoods Stock 2-Piece Hood Top Only (for 4 piece hood only) $ Stock 4-Piece Hood Sides Only (specify louver type) $ Piece Stock Hood with 20 Row Louvers $ Piece Stock Hood with 25 Row Louvers $ Piece Stock Hood with plain tops and True 25 Row Henry Louvers $1, Piece Stock Hood with 3 Row Louver Side Panels $ Piece Stock Hood with 4 Row Louver Side Panels $ Piece Stock Hood with Plain Side Panels $ B MOUNT Mounting Kit (to mount 32 4-Piece Hoods) $ Four Piece Hood Mounting Kits A AHMK Stock 4-Pc Hood Mounting Kit w/32 Center Hinge - Includes $ SS Hood Latches, Hood Latch Pads, Front & Rear Hood Hinge Brackets, Hood Prop, Hood Stops w/rubber Bumpers, SS Radiator Support Rods, SS Support Rod Brackets, Original Cowl & Grill Shell Lacing A AHRMK Hot Rod 4-Pc Hood Mounting Kit w/32 Center Hinge - Includes $ SS Hood Latches, Hood Latch Pads, Front & Rear Hood Hinge Brackets, Hood Prop, Hood Stops w/rubber Bumpers, SS Radiator Support Rods, SS Support Rod Brackets, Hot Rod Cowl & Grill Shell Lacing 3 Row Louvered Side Panel 4 Row Louvered Side Panel A BHMK Stock 4-Pc Hood Mounting Kit w/32 Center Hinge - Includes $ SS Hood Latches, Hood Latch Pads, Front & Rear Hood Hinge Brackets, Hood Prop, Hood Stops w/rubber Bumpers, SS Radiator Support Rods, SS Support Rod Brackets, Original Cowl & Grill Shell Lacing A BHRMK Hot Rod 4-Pc Hood Mounting Kit w/32 Center Hinge - Includes $ SS Hood Latches, Hood Latch Pads, Front & Rear Hood Hinge Brackets, Hood Prop, Hood Stops w/rubber Bumpers, SS Radiator Support Rods, SS Support Rod Brackets, Hot Rod Cowl & Grill Shell Lacing B HMK 32 Stock 4-Pc Hood Mounting Kit - Includes SS Hood Latches, $ Hood Latch Pads, Front & Rear Hood Hinge Brackets, Hood Prop, Hood stops w/rubber Bumpers, SS Radiator Support Rods, SS Support Rod Brackets, Original Cowl & Grill Shell Lacing Mounting Kit For 4-Piece Hood B HRHMK 32 Hot Rod 4-Pc Hood Mounting Kit - Includes SS Hood Latches, $ Hood Latch Pads, Front & Rear Hood Hinge Brackets, Hood Prop, Hood stops w/rubber Bumpers, SS Radiator Support Rods, SS Support Rod Brackets, Hot Rod Cowl & Grill Shell Lacing Hood Hardware A A LATCH Stainless Steel Hood Latches (Set of 4) $60.00 A A PAD Hood Latch Pads (Set of 4) $9.00 A A BUMP Hood Bumper Set $9.00 A AS Original Style Cowl Lacing Kit $17.00 A AS Original Style Radiator Shell Lacing Kit $16.00 B-16609SS Stainless Hood Handles $30.00 pr A-16610ALATCHKIT Hood Latch Screw Set $5.00 set Hood Hardware A B LATCH Stainless Steel Hood Latches (Set of 4) $64.00 A B PAD Hood Latch Pads (Set of 4) $9.00 A BS Original Style Cowl Lacing Kit $18.00 A BS Original Style Radiator Shell Lacing Kit $15.00 A B BUMP Hood Bumper Set $9.00 A C Rear Hood Hinge Retainer $10.00 A CB Stainless Steel Cowl Band $80.00 COWLBANDCRATE Crating charge for above cowl band (freight charges not included) $ Hood Hardware A-16610ABHR Stainless Steel Front Hood Hinge Retainer $9.00 A-192-AB Hood Stops with Bumpers $20.00 pr PROP Hood Prop Kit $40.00 kit S LACING Hot Rod Hood Lacing 3/8" W x 3/16" Thick $ L LACING Hot Rod Hood Lacing 5/8" W x 3/16" Thick $15.00 A-190-S Stainless Steel Hood Rods $30.00 kit 52 Complete Hood Mounting Kits Stainless Latch Set Stainless Latch Set Hot Rod Style Rubber Hood Lacing

53 Hoods and Hood Components (Continued) 32 Hood Hardware Stainless Steel Hood Center Hinge ( ) $25.00 B UCS Universal Stainless Steel Hood Center Hinge (u-16632) $35.00 B-610-CSLS 32 Stainless Steel Center Hinge With Long Chrome B-610-CSSS Spear For 1&3 Piece Hood $ Stainless Steel Center Hinge With Short Chrome Spear For 1&3 Piece Hood $ B LS 32 Long Chrome Spear (use without cowl vent) $50.00 B SS 32 Short Chrome Spear (use with cowl vent) $45.00 B-190-S Stainless Steel Hood Rods $30.00 B-192 Metal Hood Stops $15.00 pr B LATCH Stainless Steel Hood Latches (set of 4) $75.00 B S 32 Original Radiator Shell Lacing $14.00 B S 32 Original Cowl Lacing $15.00 Finishing Components Hood Top For 3-Piece Hood Hood Top For 3-Piece Hood Dual Open Aluminum Hood Hinge Assemblies and Hardware A A53HINGE Dual Open Hinge Assembly (Specify Model "A" or 32 Style Frame) $ A B53HINGE Dual Open Hinge Assembly (Specify Model "A or 32 Style Frame) $ B HINGE 32 Dual Open Hinge Assembly $ A A53HS Hood Top Stiffeners (2-Piece Set) $70.00 A B53HS Hood Top Stiffeners (2-Piece Set) $70.00 B B53HS 32 Hood Top Stiffeners $70.00 Hood Side Options (smooth shown) Piece Hoods With Dual Open Aluminum Latch Kit A A53 FF Piece Hood Complete For Model "A" Frame Using 29 Radiator Shell $ A A53 FF Piece Hood Complete For Model "A" Using 32 Radiator Shell $ A A53 HB Piece Hood Complete For 32 Style Frame Using 29 Radiator Shell $ A A53 HB Piece Hood Complete For Model "A" Frame Using 32 Radiator Shell $ A A TOP Piece Hood (Top Only) (For Model A Frame) $ A AHBTOP Piece Hood (Top Only) (For 32 Style/Hi-Boy Frame) $ Piece Hoods With Dual Open Aluminum Latch Kit A B53 FF Piece Hood Complete For Model "A" Frame $ A B53 HB piece Hood Complete For 32 Style Frame $ A B TOP Piece Hood (Top Only) (For Model A Frame) $ A BHBTOP Piece Hood (Top Only) (For 32 Style/Hi-Boy Frame) $ Piece 32 Hoods with Dual Open Aluminum Latch Assembly B Piece Complete Hood $1, B TOP 3-Piece Hood (Top Only) $ Hood Sides A AHS Piece Hood Sides Only $ pr A BHS Piece Hood Sides Only $ pr B16610HS 32 3 Piece Hood Sides Only $ pr One Piece Hood Mounting Kits A AB 53 MT Piece Hood Top Mounting Kit (Specify Year and Frame Type) $ B MT 32 1 Piece Hood Top Mounting Kit $ Lime Works Hood Strap Kits HSK1001SS Stainless steel hood strap kit $ HSK1001B Brass plated steel hood strap kit $ Piece Hood With Dual Open Latch Kit Mounting Kit For 1-Piece Hood Limeworks Hood Strap Kits Stainless Steel Hood Brace Rods CustomerService@BrookvilleRoadster.com

54 Finishing Components Fenders and Components Save money when ordering a body or body components for your rod with these terrific fender package deals. Get the parts you need all at once - at a great price! Model A Fenders Are Not manufactured By Brookville NOTE: Model A fenders are not manufactured by Brookville Roadster Our 32 Fenders Built To Be Exact Reproductions! Hand finished beading and edging using the same machines and skills as the originals All Steel Model "A" Fender Package Package includes: Steel Front Fenders Steel Rear Fenders Running Boards Running Board Aprons Hood Shelves Front Fender Braces Running Board Braces Front Radiator Apron 1002-AS Steel Front & Rear Fender Package $2, NOTE: Model A fenders are not manufactured by Brookville Roadster All Steel Model "A" Fender Package Package includes: Steel Front Fenders Steel Rear Fenders Running Boards Running Board Aprons Front Fender Braces Running Board Braces Front Radiator Apron 1002-BS Steel Front & Rear Fender Package $2, All Steel Fender Package Packages come standard with the following: 32 Steel Front Fenders 32 Steel Rear Fenders Front Fender Braces Running Boards Front Radiator Apron Rear Frame Horn Covers B Steel Front & Rear Fender Package with Smooth Boards $2, B-1002-RC 32 Steel Front & Rear Fender Package with Molded Rubber Covered Boards $3, Radiator Aprons A-115-A Radiator Splash Apron $75.00 A-115-B Radiator Splash Apron $75.00 A-115B Radiator Apron (to fit 32 Shell) $80.00 A-115-ACH Chopped Radiator Apron $75.00 A-115-BCH Chopped Radiator Apron $75.00 A Ford Radiator Splash Apron Mounting Kit $20.00 kit B Stock Height Radiator Splash Apron (Made by Brookville Roadster) $ B-132-CH 32 Chopped Radiator Splash Apron $80.00 B-132-BOLTKIT 32 Splash Apron to Bumper Bolt Kit $15.00 kit Hood Shelves A-188-A HS Hood Shelves $45.00 A-188-AHS-KIT Hood Shelves Bolt Kit $3.00 kit A-188HBS Wood Blocks For Hood Shelves $10.00 set Fender Welting B A Foot Roll 2/16 Bead Fender Welting $20.00 A-115-A A-115-B A-115-B

55 Fenders and Components (Continued) Model A Front Fenders A-188-ASL Steel Fender, Left Front $ A-188-ASR Steel Fender, Right Front $ A-188-AS-WL Steel Fender with Wheel Well, Left Front $ A-188-AS-WR Steel Fender with Wheel Well, Right Front $ A-188-BL 1930 Fiberglass Fender, Left Front, without extension $ A-188-BR 1930 Fiberglass Fender, Right Front, without extension $ A-188-B1L 1931 Fiberglass Fender, Left Front, without extension $ A-188-B1R 1931 Fiberglass Fender, Right Front, without extension $ A-188-BSL Steel Fender, Left Front, without extension $ A-188-BSR Steel Fender, Right Front, without extension $ A-188-BS-WL Steel Fender with Wheel Well, Left Front $ A-188-BS-WR Steel Fender with Wheel Well, Right Front $ Model A Rear Fenders A-183-AL Steel Fender, Left Rear, Roadster & Coupe $ A-183-AR Steel Fender, Right Rear, Roadster & Coupe $ A-483-AL Steel Fender, Left Rear, Sedan $ A-483-AR Steel Fender, Right Rear, Sedan $ A-183-BL Steel Fender, Left Rear, Roadster & Coupe $ A-183-BR Steel Fender, Right Rear, Roadster & Coupe $ A-483-BL Steel Fender, Left Rear, Sedan $ A-483-BR Steel Fender, Right Rear, Sedan $ Front Fenders B-188-L Left Steel Front Fender (Manufactured by Brookville Roadster) $ B-188-R Right Steel Front Fender (Manufactured by Brookville Roadster) $ B-188-FL Left Fiberglass Front Fender $ B-188-FR Right Fiberglass Front Fender $ Rear Fenders B-183-L Left Steel Coupe/Roadster Rear Fender (Manufactured by Brookville Roadster) $ B-183-R Right Steel Coupe/Roadster Rear Fender (Manufactured by Brookville Roadster) $ B-483-L Left Steel Sedan Rear Fender (Manufactured by Brookville Roadster) $ B-483-R Right Steel Sedan Rear Fender (Manufactured by Brookville Roadster) $ and Running Boards (sold as pairs only) Stock Running Boards $ pr SM 34 Smooth Running Boards $ pr Stock Running Boards $ pr SM Smooth Running Boards $ pr Finishing Components NOTE: Model A fenders are not manufactured by Brookville Roadster Front Fender Front Fender Rear Fenders Rear Fenders Independent Front Fender Braces 34 Fenders and Inner Fender Panels (Call for availability (not made by Brookville) L 34 Left Roadster and Coupe Rear Steel Fender $ R 34 Right Roadster and Coupe Rear Steel Fender $ L 34 Left Sedan Rear Steel Fender $ R 34 Right Sedan Rear Steel Fender $ L 34 Left Front Steel Fender $ R 34 Right Front Steel Fender $ IF 34 Inner Front Fender Panels (sold as a pair only) $ pr Model A Fenders With Tire Well 32 Fenders CustomerService@BrookvilleRoadster.com

56 Finishing Components Fenders and Components (Continued) 56 Front Fender Braces A-188-ABR Front Fender Braces (1 pair) $90.00 A-188-BBR Front Fender Braces (1 pair) $90.00 A-188-AIFB Independent Front Fender Braces $ pr A-188-BIFB Independent Front Fender Braces $ pr B-188-BR 32 Front Fender Braces $90.00 pr Running Boards A-185-ASS Running Board with Mat & Stainless Steel Trim $ pr A-185-AZ Running Boards with Mat & Zinc Trim $ pr A-185-ASM Smooth Running Boards $ pr A-185-A Stock Running Boards without Mat or Trim $ pr A-885-A Truck Running Boards $ pr A RM Ribbed Running Board Mat $95.00 pr A AS Stainless Steel Running Board Trim (8 Pieces) $95.00 set A AZ Zinc Running Board Trim (8 Pieces) $95.00 set A-185-B1SS 1930 Running Boards with Shields, Mat, & Stainless Steel Trim $ pr A-185-B1Z 1930 Running Boards with Shields, Mat, & Zinc Trim $ pr A-185-B2SS 1930 Running Boards with Mat & Stainless Steel Trim $ pr A-185-B2Z 1930 Running Boards with Mat & Zinc Trim $ pr A-184-B1SS 1931 Running Boards with Mat & Stainless Steel Trim $ pr A-184-B1Z 1931 Running Boards with Mat & Zinc Trim $ pr A-185-BSM Smooth Running Boards $ pr A-885-B Truck Running Boards with Diamond Plate $ pr A-185-B Stock Running Boards with No Mat or Trim $ pr A PM 1930 Pyramid Running Board Mat $95.00 pr A PM 1931 Pyramid Running Board Mat with Molded Half Round $95.00 pr A B Stainless Steel Running Board Trim (8 Pieces) $95.00 set A B Zinc Running Board Trim (8 Pieces) $95.00 set A C Stainless Steel Running Board Trim (2 Pieces) $74.00 set A C Zinc Running Board Trim (2 Pieces) $74.00 set B Stock Running Boards Uncovered $ pr B-185-SM 1932 Smooth Running Boards $ pr B-185-M 1932 Molded Rubber Covered Running Boards $ pr Model A Front Frame Horns A-158-AB Weld On Replacement Front Frame Horns $59.00 pr 32 Frame Horn Covers B-1200 Brookville Roadster Die-Stamped Steel Rear Frame Horn Covers $ pr Running Board Braces A-182-BR Running Board Braces (Set of 4) $ B-182-BR 32 Running Board Braces (Used with Stock Frames) $70.00 B-188-BR 32 Front Fender Braces (1 Pair) $75.00 Running Board Bolt Kits # Fender and Running Board Bolt Kit $17.00 kit # Fender and Running Board Bolt Kit $17.00 kit A Running Board to Brace Bolt Kit $4.00 kit Running Board Splash Aprons A-140-A Running Board Splash Aprons with Hump $ pr A-140-AWO Running Board Splash Aprons without Hump $ pr A-140-B 1931 Running Board Splash Aprons $ pr A-840-B Pickup Running Board Splash Aprons $ pr A-140-BNP 1930 Front Fender Nose Piece $90.00 pr 1932 Bumper Packages B-008 Plain Bumper Package with all Bumper Bolts, Bumper Plugs & Hardware $ B-008-SS Complete Front & Rear Bumper Package with Stainless Steel Bumper Braces & all Bumper Bolts, Bumper Plugs & Hardware $ Bumpers, Bumper Braces and Parts 008 Chrome Front or Rear Bumper $ SSSF Plain Front Bumper Braces $ pr SSF Stainless Steel Snug Front Bumper Brace $ pr SR Plain Snug Rear Bumper Braces $ pr SSSR Stainless Steel Front Bumper Braces $ pr SSSR Stainless Steel Rear Snug Bumper Braces $ pr Plain Rear Bumper Braces $ pr SSSR Stainless Steel Rear Bumper Braces $ pr B Forged Stainless Steel Bumper Bolt $16.00 B SS Polished Stainless Steel Bumper End Plugs $7.00 Running Board With Mat & Trim Running Board Splash Apron Model A Front Frame Horns Rear Frame Horn Covers

57 Finishing Components The Finest Custom Top You Can Put On Your Rod 32 Roadster Top Roadster Top Glass Backlite Option Nothing makes a roadster more useful than adding a good top. Although we offer a fine stock type top frame that when covered, will function well for a traditional looking solution, if you desire a top that will not only shade you but stay snug, look cool and handle all day highway touring, this is the one for you. We ve seen many tops but the Time Machines Unlimited is by far the best. Available for Model A s & 1932 Deuce Roadsters in several color options. When ordering a top package please specify: 1) Year & Model of Your Car 4) Top Color 2) Type of Windshield 5) Headliner Color 3) Type of Backlight 6) Mechanism Color or Finish Will Not Touch or Scratch The Body Adjusts to Variations in Body Contours Snap Together Assembly Rod Top: 1005-RT Roadster top assembly (40001) $2, RTPU Roadster extended cab pickup 2 chopped top assembly (40005) $2, BRT Roadster top assembly (40002) $2, BRTPU Roadster pickup top assembly (40006) $2, RT Roadster top assembly (40003) $2, RTPU Roadster pickup top assembly (40007) $2, Options: Windshield Type Stock height Included in base price chopped Included in base price chopped Included in base price SoCal $ Dan Fink $ Duval, Grant, Speedway $ Backlite Style Glass zip-out Included in base price Plastic zip-out Included in base price Mounting Style Stock mount Included in base price Flush mount Included in base price Side Curtains Chopped zip-in side curtains w/plastic windows $ pr Chopped zip-in side curtains w/plastic windows $ pr Top Color Black w/black headliner Included in base price Tan w/tan headliner Included in base price TOPCOLORCUSTOM - Custom color Add $ Frame Color Black Included in base price Tan Included in base price Custom color Add $75.00 Custom Tops Fold Down For Easy Trunk Storage On The Road CustomerService@BrookvilleRoadster.com

58 Finishing Components Windshields, Tops, and Components Save money when ordering a windshield and top for your Model A roadster or pick-up. These kits give you the parts you need all at once - at a great price! Windshield and Top Package Package comes standard with the following: Chrome Windshield Frame Stainless Steel Stanchions Windshield Mounting Kit Rubber Seal Stainless Steel Top Irons Wood Bows & Header with Mounting Hardware Stainless Steel Top Irons,and Wood Bows Windshield & Top Packages 1003-A Stock Height Stainless Steel / Chrome Windshield Package $ ACH " Chopped Stainless Steel / Chrome Windshield Package $ AFCH Chopped Stainless Steel / Chrome Flat Windshield Package $ B Stock Height Stainless Steel / Chrome Windshield Package $ BD Deluxe Height Stainless Steel / Chrome Windshield Package $ BDF Deluxe Height Stainless Steel / Chrome Flat Windshield Package $ B Stock Height Stainless Steel and Chrome Windshield & Top Package $ B-1003-CH Chopped Stainless Steel and Chrome Windshield & Top Package $ B-1003-CH Chopped Stainless Steel and Chrome Windshield & Top Package $ Windshield Frame Kits Package comes standard with the following: Windshield Frame (Read Description for Plain or Chrome) Stainless Steel Stanchions Windshield Mounting Kit Rubber Seal Windshield Frame Kits 1003-AWFKP Stock Height Plain Steel Windshield Frame Kit $ AWFKC Stock Height Chrome Steel Windshield Frame Kit $ AFCHWFKC Chopped Chrome Flat Steel Windshield Frame Kit $ ACHWFKC Chopped Chrome Round Steel Windshield Frame Kit $ AFCHWFKP Chopped Plain Flat Steel Windshield Frame Kit $ ACHWFKP Chopped Plain Round Steel Windshield Frame Kit $ BWFKP Stock Height Plain Steel Windshield Frame Kit $ BWFKC Stock Height Chrome Steel Windshield Frame Kit $ BDWFKP Deluxe Height Plain Round Steel Windshield Frame Kit $ BDWFKC Deluxe Height Chrome Round Steel Windshield Frame Kit $ BDFWFKP Deluxe Height Plain Flat Steel Windshield Frame Kit $ BDFWFKC Deluxe Height Chrome Flat Steel Windshield Frame Kit $ Windshield Frame Kits B-1003-WSFKP Stock Height Plain Windshield Frame Kit $ B-1003-WSFKP2 2 Chopped Plain Windshield Frame Kit $ B-1003-WSFKP3 3 Chopped Plain Windshield Frame Kit $ B-1003-WSFKC Stock Height Chrome Windshield Frame Kit $ B-1003-WSFKC2 2 Chopped Chrome Windshield Frame Kit $ B-1003-WSFKC3 3 Chopped Chrome Windshield Frame Kit $ Windshield Kit Windshield Kit 32 Windshield Kit

59 Finishing Components Windshields, Tops, and Components (Continued) Window Windshield Kits B-2070-P Window Chrome Windshield Package $ B-2070-PPL Window Pain Windshield Package $ Includes The Following: (priced for individual purchase) B Stock Height Plain Windshield Frame $ B-2070-CR 1932 Stock Height Chrome Windshield Frame $ B-2070-R Window Windshield Rubber Seal $20.00 B S Window SS Windshield Slide Arms $25.00 pr B Window Slide Arm Nuts $8.00 A SS Window Slide Arm Washer Set $10.00 set A SS Stainless Steel Pivot Bolt & Nut Set $10.00 set B-219-WM Window Slide Arm Mounting Brackets to Windshield Frame $25.00 pr Open Car Windshield Frames A-1070-A Round Plain Stock Height Open Car Windshield Frame $ A-1070-A Round Plain 2" Chopped Open Car Windshield Frame $ A-1070-ACR Round Chrome Stock Height Open Car Windshield Frame $ A-1070-AC Round Chrome 2" Chopped Open Car Windshield Frame $ A-1070-A2F Flat 2" Chopped Plain Open Car Windshield Frame $ A-1070-A2FCH Flat 2" Chopped Chrome Open Car Windshield Frame $ Open Car Windshield Frames A-1070-BS Round Plain Stock Height Open Car Windshield Frame $ A-1070-BD Round Plain Deluxe Height Open Car Windshield Frame $ A-1070-BCR Round Chrome Stock Height Open Car Windshield Frame $ A-1070-BDCR Round Chrome Deluxe Height Open Car Windshield Frame $ A-1070-BDF Flat Deluxe Height Plain Open Car Windshield Frame $ A-1070-BDFCH Flat Deluxe Height Chrome Open Car Windshield Frame $ Open Car Windshield Frames B-1070 Stock Height Plain Windshield Frame $ B-1070-CR Stock Height Chrome Windshield Frame $ B-1070-CH Chopped 2" Plain Windshield Frame $ B-1070-CH CR Chopped 2" Chrome Windshield Frame $ B-1070-CH3 Chopped 3" Plain Windshield Frame $ B-1070-CH3 CR Chopped 3" Chrome Windshield Frame $ Open Car Windshield Stanchions A A Plain Stock Height Open Car Windshield Stanchions $ pr A AS Stainless Steel Stock Height Open Car Windshield Stanchions $ pr A AC " Chopped Plain Open Car Windshield Stanchions $ pr A ACS " Chopped Stainless Steel Open Car Windshield Stanchions $ pr Open Car Windshield Stanchions A BS Stainless Steel Stock Height Open Car Windshield Stanchions $ pr A BD Stainless Steel Deluxe Height Open Car Windshield Stanchions $ pr A BF Piece Cast Deluxe Height Windshield Stanchions $ pr A BL Open Car Lower Windshield Stanchions $ pr A BSM Smooth Deluxe Height Open Car Windshield Stanchions $ pr 1932 Open Car Lower Windshield Stanchions B LS Brookville Cast Unplated Lower Stanchions, Superior Fit $ B LSCR Vintique Chrome Lower Stanchions $ Open Car Upper Windshield Stanchions B Stock Height Stainless Steel Windshield Stanchions $ B CH Chopped 2" Stainless Steel Windshield Stanchions $ B CH3 Chopped 3" Stainless Steel Windshield Stanchions $ Windshield Stanchion Hardware A ABSS Stanchion Screws (set of four) $12.00 set A BP Stanchion Backing Plates $6.00 pr A BPS Stanchion Backing Plates and Screws $12.00 set Windshield Mounting Kits, Rubber Seals and Windshield Parts A-1070-AMK Windshield Mounting Kit $30.00 A-1070-AFMK Flat Windshield Mounting Kit $30.00 A-1070-AWR Windshield Rubber Seal $8.00 A-1070-BMK Windshield Mounting Kit $34.00 A-1070-BFMK Flat Windshield Mounting Kit $34.00 A-1070-BWR Windshield Rubber Seal $10.00 A-1070-ABC Chrome Windshield Frame Cone $6.00 A-1070-ABS Windshield Frame Stud $4.00 A-1070-ABN Chrome Stanchion Wing Nut $ Round Chrome Open Car Windshield Frame Flat Chrome Open Car Windshield Frame One-Piece Cast Deluxe Height Windshield Stanchions Stainless Steel Roadster Top Irons SS Windshield Stanchions Windshield Mounting Kit Windshield Kit

60 Finishing Components Windshields, Tops, and Components (Continued) 1932 Open Car Windshield Mounting Kit B-1070-MK 32 Windshield Mounting Kit (2 Studs, 2 Cones, 4 Wingnuts) $52.00 B-1070-CONE 32 Open Car Windshield Frame Cone $8.00 ea B-1070-WING 32 Open Car Windshield Frame Wingnut $7.50 ea Top Irons and Wood A-1075-AS Stainless Steel Stock Height Roadster Top Irons and Wood Set $ A-1075-ASC Stainless Steel 2" Chopped Roadster Top Irons and Wood Set $ A-1075-A8S Stainless Steel Stock Height Roadster Pickup Top Irons and Wood Set $ A-1075-A8SC Stainless Steel 2" Chopped Roadster Pickup Top Irons and Wood Set $ A-1075-AWOOD Piece Wood Set for Top Irons $ set Top Irons and Wood A-1075-BS Stainless Steel Stock Height Roadster Top Irons and Wood Set $ A-1075-BDS Stainless Steel Deluxe Height Roadster Top Irons and Wood Set $ A-1075-B Original Style Stock Height Roadster Pickup Top Irons and Wood Set $ A-1075-B8S Stainless Steel Stock Height Roadster Pickup Top Irons and Wood Set $ A-1075-B8DS Stainless Steel Deluxe Height Roadster Pickup Top Irons and Wood Set $ A-1075-BWOOD Piece Wood Set for Top Irons $ set 1932 Open Car Top Irons and Wood B-1075-SS Stainless Steel Stock Height Tops Irons & Wood $ B-1075-CHSS Stainless Steel Chopped 2" Top Irons & Wood $ B-1075CH3SS Stainless Steel Chopped 3" Top Irons & Wood $ B-1075-WOOD 32 3-Piece Wood Set for Top Irons $ set Other Open Car Windshield Components B LSPAD 1932 Chrome Lower Stanchion Pads $6.00 B-1070-WR Open Car Windshield Rubber Seal $ Window Dual Windshield Wiper Kit B-2070-WWK 3-Window Dual Windshield Wiper Kit Comes Complete with Dual Drive Wiper Motor, Mounting Kit, Wiper Arms & Blades, Drill Kit, Switches, Wiring & Instructions. $ kit B-2070-WWKS 3-Window Single Windshield Wiper Kit Mounting Kit, Wiper Arm & Blade, Drill Kit, Switches, Wiring & Instructions. $ kit Window Windshield Parts B-219-WH Window Windshield Hinges $ pr B-219-WP Window Windshield Slide Arm Pivots $ pr 60 The Limited Edition 32 Phanton Designed by Chip Foose. See Page 24 for more details

61 Finishing Components Mirrors A AP Post Mirror $45.00 A BP Post Mirror $45.00 A A Hinge Pin Mirror (outside) $45.00 A BL Left Hinge Pin Mirror (outside) $45.00 A BR Right Hinge Pin Mirror (outside) $ P 32 Post Mirror $ CHP Chopped 32 Post Mirror $ CAP Curved Arm Peep Mirror $99.00 pr A SR Oval Head Inside Rear View Mirror $45.00 B SR Oval Head Street Rod Rear View Mirror $50.00 Curved Arm Peep Mirror SS Swan Neck Mirror Lighting and Accessories King Bee Headlights (12 volt) A-180-KB SS King Bee Headlights, Stainless Steel $ pr A-180-KBP King Bee Headlights, Primered $ pr A-180-KBC King Bee Headlights, Chrome $ pr A-180KBPTS King Bee Headlights with Turn Signals, Primered Steel $ pr A-180KBSSTS King Bee Headlights with Turn Signals, Stainless Steel $ pr Deitz Style Headlights (12 Volt) A-180-DP Deitz Style Headlights with Primered Shell & Chrome Rim $75.00 pr A-180-DC Deitz Style Headlights, Chrome Plated $75.00 pr Original Style Stock Headlights (12 volt) A-180-ASH Stainless Steel Stock Headlights $ pr A-180-ASHTS Stainless Steel Stock Headlights with Turn Signals $ pr A-180-BSH Stainless Steel Stock Headlights $ pr A-180-BSHTS Stainless Steel Stock Headlights with Turn Signals $ pr B Stainless Steel Stock Headlights $ pr B-180-TS 32 Stainless Steel Stock Headlights with Turn Signals $ pr Commercial Headlights $ pr TS 34 Commercial Headlights with Turn Signals $ pr OTB Gear Headlights - All 12 Volt 682CC Chrome Headlights with Chrome Turn Signal on Top $ pr 682PC Primered Headlights with Chrome Turn Signal on Top $ pr 682PP Primered Headlights with Primered Turn Signal on Top $ pr Headlight Wire Conduits A-180-SC Braided Stainless Steel Hose w/machined aluminum ends $65.00 pr B-14578S Original Style Headlight and Horn Conduit $10.00 ea Headlight Bars A-180-A VBAR Dropped Headlight V-Bar to clear a 32 grille shell -call for availability $ A-180-B VBAR Dropped Headlight V-Bar to clear a 32 grille shell $ A-180-ABAR Dropped Headlight Bar $ A-180-BBAR Dropped Headlight Bar $ A-180-APAD Headlight Bar Pads $5.00 pr A-180-BPAD Headlight Bar Pads $5.00 pr A-180-ABB Headlight Bar SS Bolt Kit $20.00 kit B-180-BAR 32 Headlight Bar Vintique $ B-180-BB 32 Headlamp Bar Stainless Steel Bolt Kit $20.00 kit B-180-BARBD 32 Headlamp Bar Bob Drake $ Post Mirror SS Stock Headlights with Turn Signals (12 volt) SS Stock Headlights (12 volt) King Bee Primered Headlights (12 volt) Deitz Style Headlights (12 volt) 32 SS Stock Style Headlights with Turn Signals 34 Commercial Headlights Dropped Headlight Bars CustomerService@BrookvilleRoadster.com

62 Finishing Components Lighting and Accessories (Continued) Cowl Lamps (12 volt) A ARTS Cowl Lamps with Turn Signals $ pr A ESTS Cowl Lamps with Turn Signals $ pr B Deluxe Cowl Lamps with Original Deflectors $ pr B TS Cowl Lamps with Turn Signals $ pr B Cowl Lamp Arms $50.00 pr B Cowl Lamp Arm Pad $5.00 Taillights A TL Deluxe Tail Lamps (6 Volt) $65.00 pr A ETL Economy Tail Lamps (12 Volt) $65.00 pr AB-575-S 37 Standard Hot Rod Tail Lights $80.00 pr AB-575-D Deluxe Hot Rod Tail Lights $75.00 pr AB-560-P 50 Pontiac Hot Rod Tail Lights with Plain Lenses $ pr AB-560-BD 50 Pontiac Hot Rod Tail Lights with Blue Dot Lenses $ pr AB-572-BR Includes 2 lenses, 2 stainless housings, 2 bulbs, 2 bulb sockets & 2 gaskets. Measures 6" length exposed, 1" height exposed, & 3" depth. Can be mounted flush or used with a bezel of your own design. $95.00 pr B TL 32 Deluxe Tail Lamps $75.00 pr LED Taillights FT-2831-LEDAL All Red LED Tail Light Assy-Left-12V-W/SS Housing $65.00 FT-2831-LEDAR All Red LED Tail Light Assy-Right-12V-W/SS Housing $55.00 FT-2831-LEDL All Red LED Tail Light-12V-Left Hand $45.00 FT-2831-LEDR All Red LED Tail Light-12V-Right Hand $35.00 FT-2831-RAL Red/Amber LED Tail Light-12V-Left Hand $45.00 FT-2831-RAR Red/Amber LED Tail Light-12V-Right Hand $ LED Flasher Unit $12.00 FT-3201-LEDAL 32 Ford LED Tail Light Assy-12V-Left Hand W/SS Housing $65.00 FT-3201-LEDAR 32 Ford LED Tail Light Assy-12V-Right Hand W/SS Housing $55.00 FT-3201-LEDL 32 Ford LED Tail Light Lens-12V-Left Hand $45.00 FT-3201-LEDR 32 Ford LED Tail Light Lens-12V-Right Hand $35.00 FT-3711-LC 37 Ford LED Tail Light Assy-Left Hand-Chrome $75.00 FT-3711-RC 37 Ford LED Tail Light Assy-Right Hand-Chrome $65.00 Johnson s Hot Rod 1932 LED Taillight Kit LED Short Tail Light Kit. Polished Stainless. For use $ pr without a bumper LED Short Tail Light Kit. Polished Stainless with License $ pr Plate Mount and Frame. For use without a bumper LED Tail Light Kit. Polished Stainless. For use $ pr with a bumper LED Tail Light Kit. Polished Stainless with License $ pr Plate Mount and Frame. For use with a bumper Deluxe Tail Lights 32 Deluxe Tail Lights Tail Lights 37 Tail Lights 50 Pontiac Hot Rod Tail Lights with Plain Lenses Stainless Steel Universal Taillight

63 Finishing Components Lighting and Accessories (Continued) Third Brake Light A Billet Aluminum 3rd Brake Light $45.00 Taillight Brackets A BR Black Tail Lamp Brackets $25.00 pr A BRC Chrome Tail Lamp Brackets $40.00 pr A Tail Lamp Reinforcement Bracket $6.00 A Tail Lamp Bracket Pad $4.00 B TLB 32 Tail Lamp Brackets, Black $70.00 pr B TLBC 32 Tail Lamp Brackets, Chrome $90.00 pr Aluminum Hot Rod Tail Light Bezel AB-574-BRB Hot Rod Tail Lights with Brush Finished Aluminum Bezel $ pr AB-574-BRB POL Hot Rod Tail Lights with Polished Aluminum Bezel $ pr AB-574-BRBO Unpolished Aluminum Open Face Bezel $39.00 pr AB-574-BRBP Polished Aluminum Open Face Bezel $49.00 pr AB-574-BRS Unpolished Aluminum Slant Face Bezel $39.00 pr AB-574-BRSP Polished Aluminum Slant Face Bezel $49.00 pr AB-574-BRD Unpolished Aluminum Slat Face Bezel $39.00 pr AB-574-BRDP Polished Aluminum Slat Face Bezel $49.00 pr Small Rod Lights (12 volt) CR Diamond Rod Light - Amber $ LED Small Rod Light - Amber $ LED Medium Rod Light - Amber $ LED Large Rod Light - Amber $15.00 A-180-CHP Chrome Single Filament Light Bulb, 1-3/4" w x 1-1/8" h, (may be used for turn signals) $15.00 A-180-CHPL Chrome Dual Filament Light Bulb, 2-1/2 " w x 2" h (may be used for turn signal) $ Window Dome Lamp A WS Dome Lamp Assembly with 6-Volt Battery and Switch $55.00 License Plate Frames Billet License Frames Machined & Polished Aluminum with Stainless Steel hardware $ Lighted, Machined & Polished Aluminum $ Lighted, plus 3rd Brake Light, Machined & Polished Aluminum $ Black Tail Lamp Brackets Chrome Tail Lamp Brackets Deluxe Tail Lamps Wiring Kits Haywire Kits AH-156-HW7 Haywire 7 Fuse panel Wiring Harness Kit $ AH-156-HW14 Haywire 14 Fuse panel Wiring Harness Kit $ American Auto Wire Kits Highway 15 Wiring Harness Kit $ Highway 22 Wiring Harness Kit $ Battery Trays AB-574-MS Mild Steel Frame Mount Battery Tray with Battery Clip $99.00 set AB-574-B Stainless Steel Frame Mount Battery Tray with Battery Clip $ set AB-574-BPOL Polished SS Frame Mount Battery Tray with Battery Clip $ set AB-574-FM Mild Steel Flat Floor Frame Mount Battery Tray with Battery Clip $95.00 set AB-574-FM2 Mild Steel Curved Floor Mount Battery Tray with Battery Clip $ set Flat Floor Mount Battery Tray with Battery Clip Frame Mount Battery Tray with Battery Clip CustomerService@BrookvilleRoadster.com

64 Finishing Components We re Proud To Offer The Complete Lime Works Line The Lime Works crew makes some of the nicest accessory items you can buy. We can supply you with any Lime Works item individually or installed on your Starter Kit. If you don t see a Part Below let us Know and we can Order it for you! Lime Works Steering Columns COL U 40 Ford style column 33 long, 1-1/2 diameter, unpolished, 3/4-36 spline $ COL P 40 Ford style column 33 long, 1-1/2 diameter, polished, 3/4-36 spline $ COL U 40 Ford style column 33 long, 1-3/4 diameter, unpolished, 3/4-36 spline $ COL P 40 Ford style column 33 long, 1-3/4 diameter, polished, 3/4-36 spline $ COLHR34134U Hot Rod style column 34 long, 1-3/4 diameter, unpolished, 3/4-36 spline $ COLHR34134P Hot Rod style column 34 long, 1-3/4 diameter, polished, 3/4-36 spline $ Upgrade Any Above Column to a Collapsable Column for $ Ford Style Column Fits 40 Ford & Banjo Style Wheels Hot Rod Style Column Fits Sprint Wheels & Other 3-hole Custom Wheels Lime Works Sprint Steering Wheels (black only) ST3016 Sprint style 15 steering wheel 3 Spoke and No Holes $ ST3018 Sprint Style 15 steering wheel 4 Spoke with No Noles $ ST3015 Sprint style 15 steering wheel 3 Spoke with Holes $ ST3017 Sprint style 15 steering wheel 3 Spoke with Holes $ Lime Works Polished Column Drops CD Style Column Drop - 1-1/2 Diameter, 3 Drop $ CD Style Column Drop - 1-1/2 Diameter, 4 Drop $ CD Style Column Drop - 1-3/4 Diameter, 3 Drop $ CD Style Column Drop - 1-3/4 Diameter, 4 Drop $ Lime Works Polished Turn Signal TS-112 Turn signal unit only for 1-1/2 column, double split $ TS-134 Turn signal unit only for 1-3/4 column, double split $ Polished Turn Signal Kit Plain Tilt Column with Shifter Plain Tilt Column Tilt Steering Columns Sprint Style Polished Column Drops We're proud to offer our famous tilt steering columns in cold drawn steel or machined aluminum construction. They include turn signals and 4-way flashers, and they are reproduced using only quality GM internal parts. SB-580-C Tilt Column, without Shifter, Steel $ SB-582-C Tilt Column, with Shifter, Steel $ SB-584-C Tilt & Telescopic, Steel $ SB-590-C 3-Piece Column Dress-Up Kit (will fit any GM Column) $50.00 SB-580-CTSK Turn Signal Knob $12.00 SB-592-C Aluminum Knob (fits on shifter lever on GM column) $22.00 SB-594-UDD 1"DD x 3/4" Billet Steering U-Joint $90.00 SB-594-U 1"- 48 x 3/4" Billet Steering U-Joint $90.00 SB-595-U 9/16"- 26 x 3/4-36 Billet Steering U-Joint $90.00 SB-596-U 5/8"-36 x 3/4-36 Billet Steering U-Joint $90.00 (Call For Polished and Stainless U-Joint Pricing) SB-598-S8P 3/4"-36 Double End Splined Shaft 8" Long, Polished Stainless $97.00 SB-598-S10P 3/4"-36 Double End Splined Shaft 10" Long, Polished Stainless $97.00 SB-598-S12P 3/4"-36 Double End Splined Shaft 12" Long, Polished Stainless $97.00 FR-1850 Mild Steel DD Shaft 18 $55.00 FR-1850-SS 304 Stainless Steel DD Shaft 18 $ Piece Column Dress Up Kit

65 Finishing Components Engines and Engine Components Blue Print Engines While we can order any Blue Print Engine these are the most used in builds that we have done over the years. BP3502LRCTC1 BluePrint Engines 350CI Lowrider Crate Engine Small Block $4, GM Style Dressed Longblock with Carburetor, Aluminum Heads, and Roller Cam BP3023CTC BluePrint Engines 302CI Crate Engine Small Block Ford Style $3, Dressed Long Block with Carburetor, Iron Heads, and Flat Tappet Came Performance Automatic Transmissions While we can order any of Performance Automatic s transmission packages these are the most used in our builds. PA35101 TH350 Street Smart Package $1, PA R4 Street Smart Package $2, PASS26103 C-4 Street Smart Package $2, CustomerService@BrookvilleRoadster.com

66 Finishing Components Sanderson Headers CCI-SEC465 Headers, Thermal Coated, for Small Block Chevy $ set FF5-SEC Headers, Polished for Small Block Chevy $ set CCI-P Headers, Plain, for Small Block Chevy $ set Transmission Oil Cooler TR-506-CH TC Transmission Cooler TR-507-CH TC (7 row, 2" High & Approx. 7" Long with 6 A.N. Fitting 5 1/8" Center to Center) $ Transmission Cooler (10 Row, 3" High & Approx. 7" Long with 6 A.N. Fitting 5 1/8" Center to Center) $ Use fittings AB-620-BKTS & AB-623-BKTN - See page 48 Battery Disconnect Switch AH-156-DIS Battery Disconnect Switch for a 6 or 12 volt system $30.00 A C Post Mount Battery Disconnect Switch $10.00 Emergency Brake EHB-700-F Lokar Emergency Brake Handle $ Gennie Shifter Emergency Brake Handle $ EC-80-FU Lokar Black Emergency Brake Cable Kit $ EC-80-FHT Lokar Stainless Steel Emergency Brake Cable Kit $ EHBF Lokar Lowline Emergency Brake Boot $34.00 Lokar Auto Transmission Shifters Lokar s Auto Transmission Shifter for GM 350 Turbo. Available in 3 shifter handle lengths: 12", 16", 23". Available with either anodized, or black anodized aluminum knob. ATS-6350-C 12" Handle $ ATS-6350-B 16" Handle $ ATS-6350-A 23" Handle $ (Available for other Transmissions - Call} Lokar Transmission Dipsticks TR-501-CH5 Transmission Dipstick, Chrome, GM 350 Turbo $20.00 TR-501-SS5S Transmission Dipstick, Braided Stainless Steel with machined aluminum handle and fittings for transmission mount, GM 350 Turbo $96.00 TR-501-SS5L Transmission Dipstick, Braided Stainless Steel with machined aluminum handle & fittings, 24" long. For firewall mounting. $ Other Lokar Products TC-1000-HT Stainless Steel Hi-Tech Throttle Cable KD-2350-HT Stainless Steel Hi-Tech Kick Down Cable ED-5001 Stainless Steel Flexible Dipstick For 80 and Up SB Chevy ED-5002 Stainless Steel Flexible Dipstick For 79 and Below SB Chevy EHB-7000-F Floor Mount Emergency Hand Brake BFG-6010 XL Series Aluminum Throttle Pedal Ball Milled BFG-6011 XL Series Aluminum Brake Pedal Ball Milled BAG-6003 Aluminum Dimmer Switch Ball Milled BFG-6012 XL Series Throttle Pedal with Rubber Insert BFG-6013 XL Series Brake Pedal with Rubber Insert BAG-6006 Dimmer Switch with Rubber Insert SPO-6070 Chrome Steel Spoon Style Throttle Pedal SPO-6071 Round Chrome Brake Pedal with Rubber Insert SPO-6072 Round Chrome Dimmer Pedal with Rubber Insert $58.00 $98.00 $72.00 $72.00 $ $ $55.00 $25.00 $ $55.00 $25.00 $70.00 $49.00 $

67 Finishing Components Glide Engineering Custom Seats Coupe and Roadster Bench Seats Coupe & Roadster Bench Seat with Adjustable Back $ F Contoured Foam for Adjustable Back Bench Seat $ FB Coupe & Roadster Fixed Back Bench Seat $ FB Contoured Foam for Fixed Back Bench Seat $ S Seat Sliders (for adjustable back seats only) $ Coupe and Roadster Bench Seats Coupe & Roadster Bench Seat with Adjustable Back $ F Contoured Foam for Adjustable Back Bench Seat $ FB Coupe & Roadster Fixed Back Bench Seat $ FB Contoured Foam for Fixed Back Bench Seat $ S Seat Sliders (for adjustable back seats only) $ Coupe and Roadster Bench Seats Stock Coupe & Roadster Bench Seat with Adjustable Back $ Chop Top Coupe & Roadster Bench Seat with Adjustable Back $ F Contoured Foam for Adjustable Back Bench Seat $ FB Coupe & Roadster Fixed Back Bench Seat $ FB Contoured Foam for Fixed Back Bench Seat $ S Seat Sliders (for adjustable back seats only) $ Coupe and Roadster Bench Seat with Adjustable Back Roadster Seat Frame with Fixed Back Wiseguys Seats Coupe and Roadster Bench Seats S100NW/F&CFO Roadster & Coupe Bench Seat Frame and Foam $ set S100W/F&CFO 32 Roadster & Coupe Bench Seat Frame and Foam $ set OC Roadster & Coupe Manual Seat Sliders $72.00 pr

68 Finishing Components Classic has been building top quality gauges in the USA for over 30 years and they are featured in some of the most famous cars in the street rodding world. We had them build a special set for our 3 Window NSRA Giveaway coupe. All American Vintage Classic White Traditional Silver Hot Rod White Hot G/Stock AW00SRC All American 5-Gauge Set 3-3/8 $ AW01SRC All American 6-Gauge Set 3-3/8 $ AW02SRC All American 2-Gauge Quad Set 3-3/8 $ CW00SLF Classic White 5-Gauge Set 3-3/8 $ CW01SLF Classic White 6-Gauge Set 3-3/8 $ CW02SLF Classic White 2-Gauge Quad Set 3-3/8 $ TR00SLF Traditional 5-Gauge Set 3-3/8 $ TR01SLF Traditional 6-Gauge Set 3-3/8 $ TR02SLF Traditional 2-Gauge Quad Set 3-3/8 $ GS00SLF G/Stock 5-Gauge Set 3-3/8 $ GS01SLF G/Stock 6-Gauge Set 3-3/8 $ GS02SLF G/Stock 2-Gauge Quad Set 3-3/8 $ HR00SLF Hot Rod 5-Gauge Set 3-3/8 $ HR01SLF Hot Rod 6-Gauge Set 3-3/8 $ HR02SLF Hot Rod 2-Gauge Quad Set 3-3/8 $ SS00SLF Silver 5-Gauge Set 3-3/8 $ SS01SLF Silver 6-Gauge Set 3-3/8 $ VT00SLF Vintage 5-Gauge Set 3-3/8 $ VT01SLF Vintage 6-Gauge Set 3-3/8 $ VT02SLF Vintage 2-Gauge Quad Set 3-3/8 $ WH00SLF White Hot 5-Gauge Set 3-3/8 $ WH01SLF White Hot 6-Gauge Set 3-3/8 $ WH02SLF White Hot 2-Gauge Quad Set 3-3/8 $ AW3200 All American Oval Package 5-Gauge Polished Bezel $1, AW6400 All American Oval Package 6-Gauge Polished Bezel $1, AW3200PB All American Oval Package 5-Gauge Polished Bezel $1, AW6400PB All American Oval Package 6-Gauge Polished Bezel $1, Six Gauge Set Moal Bomber Series All American Oval Package Gauge All American Traditional Speedo & Quad Set

69 Finishing Components Aluminum Dash Inserts Add the finishing touch to your Street Rod with a new Aluminum Dash Insert. Brookville Roadster, Inc. is proud to offer newly manufactured Billet Aluminum Dash Inserts. Complete with hardware, these Dash Inserts are proudly Made in the USA. They have a brushed finish and are the perfect compliment to any flat dash. Inserts are also available with tachometers. Side Inserts AH-158-A5 5 Gauge Side Insert $ AH-158-A5P 5 Gauge Side Insert (with 5 Gauges and 3 Indicator Lights) $ AH-158-A6 6 Gauge Side Insert $ AH-158-A6P 6 Gauge Side Insert (with 6 Gauges and 3 Indicator Lights) $ Oval Inserts AH-160-A5 5 Gauge Oval Insert $ AH-160-A5P 5 Gauge Oval Insert (with 5 Gauges and 3 Indicator Lights) $ AH-160-A6 6 Gauge Oval Insert $ AH-160-A6P 6 Gauge Oval Insert (with 6 Gauges and 3 Indicator Lights) $ Center Inserts AH-162-A5 5 Gauge Center Insert $ AH-162-A5P 5 Gauge Center Insert (with 5 Gauges and 3 Indicator Lights) $ AH-162-A6 6 Gauge Center Insert $ AH-162-A6P 6 Gauge Center Insert (with 6 Gauges and 3 Indicator Lights) $ Gauge Side Insert 6 Gauge Side Insert 5 Gauge Oval Insert 6 Gauge Oval Insert 5 Gauge Center Insert Complete Wheel and Tire Packages 6 Gauge Center Insert BF Goodrich Tires T/A Radial Tire R15 Raised White Letter $ T/A Radial Tire R15 Raised White Letter $ T/A Radial Tire R15 Raised White Letter $ Goodrich Silvertown R15 Black Wall $ Smoothie Steel Wheels SMPR156SM358 Smoothie 5 x 6 Wheel Primer, 5 x 4-1/2 & 5 x 4-3/4 Pattern, 3-5/8 B.S $62.00 SMPR157SM400 Smoothie 5 x 7 Wheel Primer, 5 x 4-1/2 & 5 x 4-3/4 Pattern, 4 B.S $66.00 SMPR158M400 Smoothie 5 x 8 Wheel Primer, 5 x 4-1/2 & 5 x 4-3/4 Pattern, 4 B.S $ Baby Moon Hub Cap For 15 Smoothie Wheels (Each) $30.00 Hot Rod Wire Wheels HRWP156SM300 Hot Rod Wire 5 x 6 Wheel Primer, 5 x 4-1/2 & 5 x 4-3/4 Pattern, 3 B.S $ HRWP157SM312 Hot Rod Wire 5 x 7 Wheel Primer, 5 x 4-1/2 & 5 x 4-3/4 Pattern, 3-1/2 B.S $ HRWP158SM312 Hot Rod Wire 5 x 8 Wheel Primer, 5 x 4-1/2 & 5 x 4-3/4 Pattern, 3-1/2 B.S $ HRWC156SM300 Hot Rod Wire 5 x 6 Wheel Chrome, 5 x 4-1/2 & 5 x 4-3/4 Pattern, 3 B.S $ HRWC157SM312 Hot Rod Wire 5 x 7 Wheel Chrome, 5 x 4-1/2 & 5 x 4-3/4 Pattern, 3-1/2 B.S $ HRWC158SM312 Hot Rod Wire 5 x 8 Wheel Chrome, 5 x 4-1/2 & 5 x 4-3/4 Pattern, 3-1/2 B.S $ Ford V8 Hub Cap For 15 Hot Rod Wire Wheel Wheels (Each) $30.00 Trim Rings For Above Wheels Stainless Steel Ribbed Ring (Each) $ Stainless Steel Smooth Ring (Each) $30.00 Don t See the Coker Tires you want? Give us a Call, we are a Full Coker Dealer. CustomerService@BrookvilleRoadster.com

70 Finishing Components Coy s Wheels We now offer the full range of Coy Wheels including the C-5 range available in Chrome, Black Chrome and Gunmetal. Call for Pricing. Gas Tanks Model A Saddle Type Fuel Tanks AF-120-A Complete Saddle Tank Kit $ pr AF-120-B Complete Saddle Tank Kit $ pr Aluminum Saddle Tank Heat Shields Mount on the Inside of the Frame and Protect Tanks from Exhaust Heat. Look Great Too. AF-578-AB Aluminum Shields Natural Finish $95.00 pr AF-578-ABP Aluminum Shields Polished Finish $ pr Saddle Tank Kit Model A Gas Tank Clamps A-9030-A Model A Gas Cap $22.00 A-9030-C Model A Gas Cap $30.00 A AR Model A Gas Tank Clamp $3.00 A BR Model A Gas Tank Clamp $3.00 Aluminum Saddle Tank Shields 1932 Ford Gas Tanks B-120 Gas Tank, Stock (manufactured by Tanks, Inc.) - 11 gallon $ B-120-SS Gas Tank, Stock Stainless (manufactured by Tanks, Inc.) - 11 gallon $ B-120-V Gas Tank, Stock (manufactured by Vintique) - 11 gallon $ B-120-D Deep Gas Tank (manufactured by Tanks, Inc.) - 14 gallon $ B-9030-SS SS Gas Cap $ Locking Gas Cap $ Ford Gas Tank Accessories B-1210-PS Stainless Steel Rear Spreader Bar, Polished $ B-1210 Mild Steel Rear Spreader Bar $75.00 B-1220 Mild Steel Front Spreader Bar $55.00 B-1220-PS Stainless Steel Front Spreader Bar, Polished $ Ford Gas Tank Vintique 32 Gas Tank Gas Tank Covers (Call for availability (not made by Brookville) GTC Gas Tank Cover $ (specify stock, smooth or smooth w/o bumper bumps) GTCL Gas Tank Cover with License Plate Recess $ (specify stock, smooth or smooth w/o bumper bumps) Front and Rear Spreader Bar

71 Finishing Components Vintage Air literally invented the street rod air conditioning industry back in They offer the comprehensive line of climate control systems anywhere. We recommend Vintage Air in your new project for maximum cruising comfort. We are a full dealer for Vintage Air, call for other years and models. Vintage Air Gen II Evaporator Units - Great Fit For Model-A and VUX-A Gen II Compac Heat & Cool $ RUA 4-Knob Streamline In-Line Control Panel Polished and Lighted $ RHQ 4-Knob Streamline Oval Control Panel Polished and Lighted $ MBA 4-Way Square Firewall Plate For A/C and Heat Lines $ MBA 4-Way In-Line Firewall Plate For A/C and Heat Lines $ VUQ Chrome Drier With Binary Switch, With Mounting Bracket $ VUQ Chrome Drier With Trinary Switch, With Mounting Bracket $ SWA Sanden SD-508 Compressor Standard Finish,V-Groove Pulley $ SWQ Sanden SD-508 Compressor Polished Finish,V-Groove Pulley $ Vintage Air FrontRunner Engine Drive Systems SCA Small Block Chevy (Non-Power Steering Application), Bright Finish $ SCA Small Block Chevy (Non-Power Steering Application), Black Finish $ TM Coupes and roadsters will run more quietly and stay cooler with a complete installation of Dynamat materials. Dynamat Xtreme The top of the line. It has the highest damping efficiency and doubles as a radiant energy reflector as it has an aluminum outer facing. Xtreme can be used on any surface: firewall, floor, engine compartment, roof, trunk, or doors. It is ultra thin light weight and conforms easily to floor contour : Dynamat Extreme Bulk Pack 9-18 x 32 Pieces $ Dynaliner The perfect ultra-lightweight insulator to use on top of Dynamat. This durable, crush and tear resistant material has the highest heat blocking properties available in a single layer synthetic foam-type material. Not affected by oil and does not absorb water. Dynaliner provides acoustic isolation and excellent thermal insulation for roof, firewall, floor and doors : Dynamat High Performance Insulation 1/4 Thick - 32 x 54 $75.00 Application Rollers Applying Dynamat is simple with the right tools. Proper adhesion will guarantee long lasting results. The Economy Roller is perfect for simple applications. The Professional Roller is a must for that do-it yourself who desires the best results : Dynamat Heavy Duty Dyna Roller A Must For Proper Installation $25.00 CustomerService@BrookvilleRoadster.com

72 30-31 Roadster Diagrams 72 1 A-2050-B Left Roadster Quarter Panel with Braces Pg A-2051-B Right Roadster Quarter Panel with Braces Pg A-1015-BREC4 4 Recessed Firewall Pg. 88 A-1015-BREC5 5 Recessed Firewall Pg. 88 A-1015-BREC6 6 Recessed Firewall Pg A-1015-B Stock Firewall with All Holes Cutouts Pg. 88 A-1015-BWO Smooth Firewall without Holes Pg A-114-BF Open Car Full Length Cowl Panels Pg A-1040-B Left Side Open Car Door Skin (Stock) Pg A-1041-B Right Side Open Car Door Skin (Stock) Pg.91 8 A-117-B Model A Cowl Cover (Replaces Original Tank) Pg.90 9 A BL Open Car Lower Stanchions Pg A-136-BF Open Car 32 Style Dash Pg A-1001-B Open Car Dash Rail Pg A-167-B Roadster Above the Deck Lid Panel Pg A-1059-ABS Smooth Roadster and Coupe Outer Deck Lid Skin Pg A-163-B Roadster and Coupe Below the Decklid Panel with Bead Pg

73 30-31 Roadster Diagrams 1 A-1010-BFB Open Car Front Cowl Posts Pg A-1010-BLB Open Car Lower Cowl Post Braces Pg A-1010-BUB Open Car Upper Cowl Post Braces Pg A-1010-BUBC Open Car Upper Cowl Panel Upholstery Brace Pg. 5 A BR Gas Tank Clamps Pg A-1013-BT Open Car Ram Horn Upholstery Brace Pg A-1013-B Open Car Ram Horns Pg A-1005-B Dash Reinforcement Bar (Ties Cowl Post Together) Pg.89 9 A-2050-BBRLOWER Lower Quarter Panel Post Braces Pg A-2050-BPOST Roadster Quarter Panel Post Braces Pg A-2050-BTT Top Iron Tab (Attached Top Irons to Quater Panel) Pg A-2050-BFU Front Upper Quarter Panel Brace Pg A-125-B Roadster Seat Adjuster Pg A-129-B Roadster Package Tray Pg A-2050-BRU Rear Upper Quarter Panel Brace Pg A-166-B Roadster Front Trunk or Rumble Compartment Braces Pg A-2050-BRGH Reinforcement Plate for Grab Handles Pg A-169-BT Upper Rain Gutter Trough Pg A-169-AB Triangle Corners Pg A-169-AS Rain Gutter Sides Pg A-1059-ABTH Coupe and Roadster Trunk Hinge Kit Pg A Triangle Pieces Pg A-162-B Rumble Hinge Braces Pg. 79 CustomerService@BrookvilleRoadster.com

74 30-31 Roadster Diagrams 24 A-161-ABTR Coupe and Roadster Trunk Panel Pg A-1059-TP Trunk Prop Kit Pg A-1059-ABC Roadster and Coupe Trunk Catch Pg A-161-ABTRIANGLE Inner Trunk Panel Angle Brace Pg B Trunk Rubber Bumper Kit Pg A-1059-ABTL Rumble and Trunk Latch Pg A-1059-ABDLH Locking Decklid Outside Handle Pg AH-144-R Deck Former Pieces Pg A-2060-BTS Roadster Wood Tack Strip Pg A-1059-BIT Coupe and Roadster Inner Trunk Panel Pg A-159-A Rumble Seat Platform Pg A-161-A Roadster and Coupe Rumble Seat Curved Inner Panel Pg A-543-BR Rumble Seat Stops with Rubber Bumpers Pg A-1059-ABRH Trunk Rubber Bumper Kit Pg A-1059-ABSP Rumble Lid Striker Plate Pg A-1059-BRL Rumble Lid Latch Pg A-1059-ABDLH Locking Decklid Outside Handle Pg

75 30-31 Roadster Diagrams All Components can be Found on Pg. 86. Unless Otherwise Specified. ** ** ** ** * * * * * Part of Kit A2031B ** Part of Kit 132EXB Pg. 87 Pg. 102 Pg. 87 Pg. 87 Pg. 88 Pg. 88 Pg. 87 CustomerService@BrookvilleRoadster.com

76 30-31 Roadster Diagrams All Components can be found on Page 86 unless ot herwise Stated. ** ** ** ** * * * * * Part of A2031B ** Part of A132EXB Pg. 87 Pg. 87 Pg. 88 Pg. 87 Pg. 87 Pg. 87 Pg. 87 Pg

77 30-31 Roadster Diagrams Left Door Shown (Right Door Not Shown) 1 A-1040-B Left Side Outer Door Skin Pg. 91 (A-1041-B) Right Side Outer Door Skin Pg. 91 Optional A-1040-BSM Left Side Smooth Outer Door Skin Pg. 91 (A-1041-BSM Right Side Smooth Outer Door Skin Pg A-1044-B Complete Left Side Inner Door Panel Pg. 91 (A-1045-B) Complete Right Side Inner Door Panel Pg A35655/56B Roadster Outside Door Handle Pg A AR Left Side Open Car Door Latch Pg. 92 A AR Right Side Open Car Door Latch Pg A Stainless Steel Outside Door Handle Pg A B Front Door Hinge for Roadster Pg A Roadster Door Striker Plates Pg. 92 Complete Doors that arrive Assembled can also be found on Page 91. CustomerService@BrookvilleRoadster.com

78 30-31 Roadster Diagrams All Components may be found on Page 59 unless Otherwise Specified. Pg

79 32 Roadster Diagrams All Components are Located on Page 89 unless Oth erwise Specified. B-1011-UB 0110-B B-1010-LB B-1 23 Pg. 88 Pg. 88 Pg. 88 Continued to Next Page Pg. 96

80 32 Roadster Diagrams B-1059-C Pg. 96 Pg. 96 Pg. 88 Pg. 99 Pg. 99 Pg. 88 Pg. 99 Pg. 96 Pg. 98 Pg. 95 Pg. 99 Pg. 96 Pg. 99 Pg. 99 AB-1059-TBS AB T PSB Pg. 99 Pg. 98 Pg. 99 Pg. 88 B-2060-TS 1932 Roadster Wood Tack St rip Pg. 98 Pg. 98 Pg. 98 Pg. 99 Pg. 102 Pg. 99 Pg. 99 Pg. 99 Pg. 98 Pg. 88 Pg. 88 Pg. 98 Pg. 90 A Rumble Striker Plate Pg. 98 Pg g

81 32 Roadster Diagrams Pg. 96 Pg. 96 Pg. 89 Pg. 98 Pg. 92 Pg. 99 Pg. 99 Pg. 92 Pg ASSEMWV Roadster Cowl Top with Vent Assembly 117-ASSEM Roadster Cowl Top Pg. 89 Pg. 89 Pg. 99 Pg. 89 Pg. 90 Pg. 89 Pg. 90 Pg. 90 Pg

82 32 Roadster Diagrams 1 B-132-F Full Length Subrails Pg B-2021 Cross Channels Pg B-132-SS Subrail Stiffeners Pg B-132-EXR Subrail Extensions Pg B-135 Panel Under the Seat (Stock) Pg B-135-F Panel Under the Seat (Flat) Pg B-155 Rear Floor Pg B-161 Roadster Tail Pan Extensions Pg B-137-WOOD Wooden Front Floor Pg B137-REC Steel Front Floor for Flat Firewall Pg B137-F Steel Front Floor for Stock Pg

83 32 Roadster Diagrams Components may be Found on Page 60 unless otherwise specified

84 32 Roadster Diagrams Left Door Shown (Right Door ) 1 B-1040 Left Side Outer Door Skin Pg. 92 (B-1041) Right Side Outer Door Skin Pg. 92 Optional B-1040-SM Left Side Smooth Outer Door Skin Pg. 92 (B-1041-SM Right Side Smooth Outer Door Skin Pg B-1044) Complete Left Side Inner Door Panel Pg. 92 (B-1045) Complete Right Side Inner Door Panel Pg B Left Door Latch Pg. 92 (B-35656) Right Door Latch Pg B Roadster Outside Door Handle Pg B Roadster Door Handle Pulls Pg B Roadster Inside Door Handles Pg B Roadster Door Strikers Pg B Stainless Steel Roadster Dove Tails Pg B Door Rubber Bumpers Pg B Roadster Door Hinges (Set of Four) Pg

85 32 Roadster Diagrams Components can be found on page

86 Sheet Metal Components Subframes and Components Ford Roadster Subframe Assemblies Assembled Subframes Include: Subrails, Cross Channels, Under Seat Pan, and Rumble Floor Riveted together. The Seat Frame and Rumble Platform are Sent Loose. A-2032-AASSEM Roadster Subframe Assembly with Stock Floors (includes seat frame) $ A-2032-BASSEM Roadster Subframe Assembly with Stock Floors (includes seat frame) $ A-2032-AFLAT Roadster Subframe Assembly with Flat Floors $ A-2032-BFLAT Roadster Subframe Assembly with Flat Floors $ A-3032-BFLAT Coupe Subframe Assembly with Flat Floors $ Ford Roadster Pickup Subframe Assemblies (not for extended cab bodies) Assembled Subframes Include: Subrails, Cross Channels, and Under Seat Pan Riveted together. The Seat Frame is Sent Loose. A-1032-AASSEM Roadster Pickup Subframe Assembly with Stock Floor Pans $ A-1032-AEXTASSEM Roadster Pickup Subframe Assembly with Stock Floor Pans $ A-1032-BASSEM Roadster Pickup Subframe Assembly with Stock Floor Pans $ A-1032-BEXTASSEM Roadster Pickup Subframe Assembly with Stock Floor Pans $ Ford Closed Cab Pickup Subframe Assemblies A-1032-ACCASSEM Closed Cab Pickup Subframe Assembly with Stock Floor Pans $ Roadster Subframe Assemblies Assembled Subframes Include: Subrails, Cross Channels, and Under Seat Pan Riveted Together and Rear Subrail Extension Welded to Subrails. Rear Floor Sent Loose. B2032-ASSEM 1932 Subframe Assembly with Stock Pan Under Seat $ B2032-FLAT 1932 Subframe Assembly with Flat Pan Under Seat $ Window Subframe Assemblies Assembled Subframes Include: Subrails, Cross Channels, and Under Seat Pan Riveted Together Rear Floor Sent Loose. B-3032-ASSEM Window Coupe Subframe Assembly with Stock Pan Under Seat $ B-3032-FLAT Window Coupe Subframe Assembly with Flat Pan Under Seat $ Subrails and Cross Channels A-132-EXA Subrail Extensions & Floor Board Braces (4-Piece Set) $ A-132-EXB Subrail Extensions & Floor Board Braces (4-Piece Set) $ A-132-AF Roadster & Coupe Full Length Subrails $ pr A-132-BF Roadster Full Length Subrails $ pr A-1032-A Roadster Pickup Full Length Subrails $ pr A-1032-B Roadster Pickup Full Length Subrails $ pr A-432-AF Sedan Full Length Subrails $ pr A-832-AF Closed Cab Pickup Full Length Subrails $ pr A-332-BF Coupe Full Length Subrails $ pr A-432-BF Sedan Full Length Subrails $ pr A-132-A Roadster & Coupe Rear Half Subrails $ pr A-432-A Sedan Rear Half Subrails $ pr A-132-B Roadster Rear Half Subrails $ pr A-332-A Roadster Rear Half Subrails $ pr A-332-B Coupe Rear Half Subrails $ pr A-432-B Sedan Rear Half Subrails - (Note: A-432-BF May Be Used For Closed Cab Pickup with No Changes Except Cut To Length) $ pr A-132-ABHB Hi-Boy Conversion Kit For Subrails $ kit A Roadster Cross Channels (3-Piece Set) $99.00 A Coupe Cross Channels (3-Piece Set) $99.00 A-1031-A Roadster Pickup Cross Channels (2-Piece Set, front & rear) $ A-1031-B Roadster Pickup Cross Channels (2-Piece Set, front & rear) $ A-1031-RB Roadster Pickup Rear Body Panel $ A-1031-RB EXT Extended Cab Roadster Pickup Rear Cross Channel (2-Piece Set) $ A-2031-A Roadster Cross Channels (3-Piece Set) $ A-2031-B 31 Roadster Cross Channels (3-Piece Set) $ A-165-AB Coupe & Roadster Heavy Rear Crossmember $ A-465-AB Tudor Sedan Heavy Rear Crossmember $ Subframe Assembly with Stock Floors Subframe Assembly with Flat Floors Pickup Subframe Assembly with Stock Floor Pans Model A Half Sub Rails Model A Cross Channels 86 Please Note: Primer is for illustrative use only. Bodies and sheet metal components do not come primered Model A Cross Channels

87 Sheet Metal Components Subframes and Components (Continued) 1932 Subrails and Cross Channels B Cross Channels (notched & formed, for 32 Roadster) $ pr B Ford All Models Cross Channels (2-Piece Set) $75.00 set B-132-F 1932 Full Length Subrails $ pr B-132-EXR 1932 Rear Subrail Extensions $ pr B-132-SS 1932 Subrail-to-Cross Channel Stiffeners (4-Piece Set) $ set B-132-FREAR 1932 Rear Half Subrails $ pr B-232-F Window Subrails $1, pr B-232-RC Window Subrail Rocker Covers $ pr B-232-EXR Win dow Rear Subrail Extensions $ set B Window Cross Channels $ pr Model A Steel Floors and Pans A-137-A Model A Steel Floor Board for Stock Firewall $ A-137-B Model A Steel Floor Board for Stock Firewall $ A-137-ARC Model A Steel Floor Board for 4 Recessed Firewall $ A-137-ARC Model A Steel Floor Board for 5 Recessed Firewall $ A-137-ARC Model A Steel Floor Board for 6 Recessed Firewall $ A-137-BRC Model A Steel Floor Board for 4 Recessed Firewall $ A-137-BRC Model A Steel Floor Board for 5 Recessed Firewall $ A-137-BRC Model A Steel Floor Board for 6 Recessed Firewall $ A-137-ABTH Transmission Hump For Steel Front Floor (specify TH350 or TH400) $65.00 A-127-A Roadster Curtain Pan Under Front Seat $ A-727-A 28 Early and 28 Touring Curtain Pan $ A-151-A Roadster Rumble Floor $99.00 A-159-A Roadster Rumble Platform $ A-161-A Roadster & 30 Coupe Rumble Seat Curved Inner Panel $ A-335-B Coupe Panel Under Front Seat (Die Stamped) $ A-135-A Roadster Pickup Panel Under Front Seat $80.00 (Also Works with Coupe, 28 Touring, and Closed Cab) A-835-A Closed Cab Pickup, Panel Under Front Seat Frame $75.00 A-455-A Tudor Sedan, Panel Under Rear Seat $99.00 A-455-B Tudor Sedan, Panel Under Rear Seat $99.00 A-351-B Coupe, Flat Rumble Seat Floor $99.00 A-335-BF Coupe, Flat Floor Under Seat $95.00 A-1064-AB Model A Wood Front Floor $ Model A Roll Pans AB-114-BRWO Roll Pan without Lights $ AB-114-BR Roll Pan with Lights $ AB-116-BR Roll Pan Extension Pan $85.00 AB-116-BRCB Extension Pan Corner Braces $ Roadster Floor Pans and Seat Parts B-137-W 1932 Wood Front Floor $ B-137-F 1932 Front Steel Floor (used with Stock Firewall) $ B-137-REC 1932 Front Steel Floor (used with our Flat Firewall) $ B-137-TH 1932 Transmission Hump (Welds Into Front Floor - 2 Pieces) $75.00 set B Die-Stamped 32 Pan for under Front Seat (used with Roadster, 5-Window Coupe, Touring & Cabriolet) $ B-135-F 1932 Flat Hot Rod Style Floor Seat (for use with Aftermarket Hot Rod Frame) $95.00 B Roadster & 5-Window Coupe Rear Floor (Die Stamped) $ FLOORCRATE Crating Charge For Floor (not including freight charges) $50.00 \ B-237-W Window Wood Front Floor $ B-237-F Window Steel Front Floor, used with Stock Firewall $ B-237-REC Window Steel Front Floor, used with Flat Firewall $ B Window Stock Pan, Die Stamped, Fits Under Front Seat $ B-235-F Window Flat Pan Under Seat $99.00 B Window Coupe Rear Floor (Styled after the Roadster & 5-Window Floor) $ FLOORCRATE Crating Charge For Rear Floor (not including freight charges) $50.00 Rear Subrail Extensions Coupe Panel Under Front Seat 32 Stock Pan Under Seat 32 Steel Front Floor for Flat Firewall 32 Steel Front Floor for Stock Firewall 32 Rear Floor 32 3-Window Rear Floor Pan CustomerService@BrookvilleRoadster.com

88 Sheet Metal Components Subframes and Components (Continued) Model "A" Seat Frames and Parts A-121-A Roadster Front Seat Frame $ A-121-A-BRACE Roadster Seat Stiffener Brace (for back of seat frame) $95.00 A-121-A SC Roadster Seat Clips Set (holds seat back cushion to body wood) $53.00 A-121-B Roadster Front Seat Frame $ A-121-DIMPLE Dimple Used In Seat Frame $17.00 A-123-A Roadster Seat Riser $ A-123-B Roadster Seat Riser $ A-125-B Roadster Set Adjuster $78.00 A-129-B Roadster Package Tray $90.00 A-457-A Sedan Rear Seat Frame $ A-321-A Coupe Seat Frame $ A-757-A Touring Rear Seat Frame Assembly $ A-821-A Roadster Pickup Seat Frame $ A-457-A Tudor Sedan Rear Seat Frame (Spotwelded to Rear Floor) $ A-457-A1 W/H Tudor Sedan Rear Seat Frame with Hump $ A-457-B Tudor Sedan Rear Seat Frame (Spotwelded to Rear Floor) $ A-457-B W/H Tudor Sedan Rear Seat Frame with Hump $ A-821-A Closed Cab Pickup Seat Frame $ A-821-B Closed Cab Pickup & Roadster Pickup Seat Frame $ A-321-B Coupe Seat Assembly (2 Sides, Base & Wood) $ A-321-BASE U-Shaped Piece (30 Coupe Seat Assembly Fastens To) $ A-321-METAL Metal Ends & Toe Panel For Coupe Seat Assembly $ A-321-T Seat Tracks For Coupe $ A-757-A W/H Touring Rear Seat Frame with Hump $ A-755-A Touring Panel Under Rear Seat Frame $95.00 A-335-B Coupe Panel Under Front Seat (Die Stamped) $ A-135-A Roadster Pickup Panel Under Front Seat $80.00 (Also Works with Coupe, 28 Touring, and Closed Cab) A-835-A Closed Cab Pickup, Panel Under Front Seat Frame $75.00 A-455-A Tudor Sedan, Panel Under Rear Seat $99.00 A-455-B Tudor Sedan, Panel Under Rear Seat $99.00 A-351-B Coupe, Flat Rumble Seat Floor $99.00 A-335-BF Coupe, Flat Floor Under Seat $95.00 A-129-B Front Seat Package Tray $ Roadster Seat Frames and Seat Parts B-121 Front Seat Frame $ B-123 Front Seat Riser $ B-123-C Upholstery Channels (from top of Quarter to Seat Frame) $ pr B-125-B Front Seat Adjuster $90.00 B Front Seat Package Tray $ B-159 Roadster & 5-Window Coupe Rumble Seat Riser (like original) $75.00 B-161 Tail Pan Extension (for Rear Floor) $75.00 B-543 Roadster & 5-Window Coupe Rumble Seat Stops $32.00 pr B-543-R Roadster & 5-Window Coupe Rumble Seat Stops with Rubber Bumpers $35.00 pr Deck Former (Replaces Package Tray AH-144-R Deck Former Pieces $ Firewalls Model A Firewalls A-1015-A Stock Firewall $ A-1015-AWO Stock Firewall without holes $ A-1015-A REC Firewall Recessed $ A-1015-A REC Firewall Recessed $ A-1015-A REC Firewall Recessed $ A-1015-B Stock Firewall $ A-1015-BWO Stock Firewall without holes $ A-1015-B REC Firewall Recessed $ A-1015-B REC Firewall Recessed $ A-1015-B REC Firewall Recessed $ Model A Roadster Seat Frame & Riser Stock Firewall No Holes Recessed Firewall Stock Firewall No Holes Recessed Firewall

89 Sheet Metal Components Firewalls (Continued) Note: Firewall Feet sent Loose 1932 Firewalls B Flat Firewall with Stock Bead & Stock Feet, Bead & Rubber Seal $ B-1015-S 1932 Flat Firewall Stamping Only $ B-1015-FF 1932 Flat Firewall Feet for Flat Firewall $ pr B-1015-SF 1932 Stock Firewall Feet $ pr B-1015-SB 1932 Stock Firewall Band $ B1015-SEAL 1932 Cowl to Firewall Seal $10.00 B-1015-STOCK 1932 Stock Firewall with Stock Feet, Bead & Rubber Seal $ B-1015-CB 1932 Stock Firewall Center Hood Hinge Brace (for 4-piece hood, supports center hinge bracket mounts to firewall) $20.00 Cowl Components Model A Roadster and Roadster Pickup Cowl Section A-1001-A Open Car Dash Rail (fits Roadster, Roadster Pickup & Phaeton) $ A-1001-B Open Car Dash Rail (fits Roadster, Roadster Pickup & Phaeton) $ A-1005-A Dash Reinforcement Bar (ties cowl post together) $ A-1005-B Dash Reinforcement Bar (ties cowl post together) $ A-1001-AB Open Car Brace (fits on each end of dash reinforcement bar where dash rail fastens) $80.00 pr A-1001-ACB Open Car Center Brace (fits on reinforcement bar where dash rail fastens) $27.00 pr A-1010-B-UB Open Car Upper Cowl Panel Braces $85.00 pr A-1010-B-LB Open Car Lower Cowl Post Braces $99.00 pr A-1010-B-FB Open Car Front Cowl Posts $ pr A-1010-A Left Side Open Car Cowl Post (included with cowl post brace) (fits Roadster, Roadster Pickup & Phaeton) $ A-1011-A Right Side Open Car Cowl Post (included with cowl post brace) (fits Roadster, Roadster Pickup & Phaeton) $ A-1010-AB Open Car Cowl Post Lower Brace $65.00 pr A-114-BF Open Car Full Cowl Panel $ pr A-114-A Full Length Cowl Panels (for all models except 4 door sedan) $ pr A-1013-B Open Car Ram Horns $ pr A-1013-BT Open Car Ram Horn Tabs $ Cowl Section Parts B-114-BF 1932 Roadster Full Length Cowl Panels $ pr B-114-S 1932 Stiffener Channel (for Front Lip of Cowl Panel) $75.00 pr B-1010-UB 1932 Upper Cowl Panel Braces $ pr B-1010-FB 1932 Front Cowl Posts $ pr B-1010-LB 1932 Lower Front Cowl Post Braces $ pr B-1011-UB 1932 Upholstery Braces (that go on Stiffener Channel) $32.00 pr B-114-M 1932 Mounting Brackets (draws Cowl over Firewall & down onto Frame) $ pr B Roadster Cowl Top (Stamping Only) $ B-117-ASSEM-WV 1932 Roadster Cowl Top Assembly with Vent (includes all braces) $ B-117-ASSEM 1932 Roadster Cowl Top Assembly with No Vent (includes all braces) $ B-117-C 1932 Cowl Top Corner Braces (door closes into braces) $ pr B-117-S 1932 Stiffener Channel (for Front Edge of Cowl Top) $99.00 B Dash Reinforcement Bar & Cowl Top Brace $ B-1005-S 1932Stiffener Plates on Dash Reinforcement Bar for Supporting Lower Stanchions $60.00 pr Window Cowl Section Parts B Window Dash Tie Bar $ B-2005-EB Window Dash Tie Bar End Brackets $ pr B-2005-UH Window Steel Upper Inner Header Roof Panel Complete $ B Window Upper Front Roof Panel $ B-219-HP Window Windshield Upper Front Header Panel $ B-2010-A Window Left A Pillar Assembly (Inner and Outer Assembled) $ B-2011-A Window Right A Pillar Assembly (Inner and Outer Assembled) $ B-2010-UB Window Upper Cowl Panel Braces $ pr B Window Smooth Cowl Top $ B-217V Window Cowl Top with Vent Installed $ Stock Firewall with Stock Feet and Stock Bead Cowl Posts Complete Cowl Panel Stock Firewall Feet Flat Firewall with Stock Bead Open Car Full Cowl Panel 32 Full Length Cowl Panels 32 Roadster Cowl Top 32 3-Window Cowl Top With Vent CustomerService@BrookvilleRoadster.com

90 Sheet Metal Components Cowl Components (Continued) Model A Cowl Covers A-117-A Smooth Cowl Cover $ A-117-AHR Model A Cowl Cover with Hot Rod Upper Firewall (ribbed) $ A-117-AHS Model A Cowl Cover with Hot Rod Upper Firewall (smooth) $ A-117-B Smooth Cowl Cover $ AF-118-F Hot Rod Upper Firewall (Ribbed Pattern) $ AF-118-FSM Hot Rod Upper Firewall (Smooth ) $ Cowl Vent Patch and Cowl Vent Parts B-117-CVP 1932 Complete Cowl Vent Patch (Assembled) $ B-117-CV-SCREEN 1932 Cowl Vent Screen $50.00 B-117-CVD 1932 Cowl Vent, Door With Air Deflector $ B-117-CVDH 1932 Cowl Vent Door Hinge $95.00 B-117-CVPO 1932Cowl Vent Patch without Door & Mechanism $95.00 B-117-CVR 1932 Cowl Vent Ratchet $23.00 B-117-CVH 1932 Cowl Vent Handle $28.00 B-117-CVS 1932 Cowl Vent Spring $10.00 B-117-CVG 1932 Cowl Vent Gasket $25.00 B-117-CVK 1932 Cowl Vent handle & Gasket combo kit $50.00 B-117-CVLT 1932Cowl Vent Lower Rain Gutter Trough with Drain Tube $95.00 B-117-CVLTS 1932 Cowl Vent Lower Trough Stud that Spring Attaches To $10.00 B-117-CVTOP 1932 Cowl Vent Door Only (no air deflector) $75.00 B-117-CV-REF 1932 Cowl Vent Door Reflector Only $65.00 Dashes 1932 Roadster Style Dash for Model A Made from heavy gauge steel for Model A Roadster & Roadster Pickups, as well as Model A closed cars. A-136-AF Open Car $ A-136-AF CC Closed Car $ A-136-BF Open Car $ A-136-BF CC Closed Car $ A-136-A UNI Universal Style - you trim-to-fit your car (measures 12 total height) $ Roadster Dash (For Roadster and Roadster Pickups) B Roadster Dash (without oval recess) $ B-139-OR 1932 Roadster Dash with original style oval recess $ B Oval panel trim for original style dash $85.00 B-139-GB 1932 Roadster Dash with Glove Box Door Installed $ B Metal Glove Box (standard length) $ B-240-S 1932 Metal Glove Box (short length for use with air conditioning system)$ Window Dashes B-239-SM Window Smooth Face Dash $ B Window Stock Dash with Cutouts & Center Oval $ B-239-C Window Stock Dash with Center Oval & Glove Box Door installed $1, B-239-GBD Window Glove Box Door with Hinge $ B-239-GBDH Window Glove Box Door Hinge $45.00 B-239-GBDS Window Glove Box Door Spring $25.00 B-239-SS-AT Window Coupe SS Ash Tray $ Cowl Cover Hot Rod Upper Firewall Cowl Cover 32 Cowl Vent Assembly Bottom View 32 Cowl Vent Patch Panel 32 Style Dash 32 Roadster Dash With Glove Box Door Installed 32 Roadster Original Style Dash

91 Sheet Metal Components Dashes (Continued) Smooth Face Dash Stock Dash with Cutouts and Center Oval Glove Box Door Metal Glove Box Stock Dash with Center Oval and Glove Box Door Doors and Components Model A Assembled Doors A-1046-A 28 Left Side Stock Open Car Door (completely assembled with hinges) $ A-1046-A29 29 Left Side Stock Open Car Door (completely assembled with hinges) $ A-1046-ASM 28-29Left Smooth Open Car Door (completely assembled with hinges) $ A-1047-A 28 Right Side Stock Open Car Door (completely assembled with hinges) $ A-1047-A29 29 Right Side Stock Open Car Door (completely assembled with hinges) $ A-1047-ASM Right Smooth Open Car Door (completely assembled with hinges) $ A-1046-B 30-31Left Stock Open Car Door (completely assembled with hinges) $ A-1046-BSM 30-31Left Smooth Open Car Door (completely assembled with hinges) $ A-1047-B 30-31Right Stock Open Car Door (completely assembled with hinges) $ A-1047-BSM 30-31Right Smooth Open Car Door (completely assembled with hinges) $ Open Car Door 1932 Roadster Assembled Doors B-1046 Stock Left Side Open Car Door (Assembled) With Curtain Rod Hole and Bead Around Hinge $ B-1046-WO Stock Left Side Open Car Door (Assembled) With Curtain Rod Hole and without Bead Around Hinge $ B-1046-SM Smooth Left Side Open Car Door (Assembled) without Curtain Rod Hole and With Bead Around Hinge $ B-1046-SMWO Smooth Left Side Open Car Door (Assembled) without Curtain Rod Hole and Without Bead Around Hinge $ B-1046-HH Hidden Hinge Left Side Open Car Door (Assembled) $ B-1047 Stock Right Side Open Car Door (Assembled) With Curtain Rod Hole and Bead Around Hinge $ B-1047-WO Stock Right Side Open Car Door (Assembled With Curtain Rod Hole and without Bead Around Hinge $ B-1047-SM Smooth Right Side Open Car Door (Assembled) without Curtain Rod Hole and With Bead Around Hinge $ B-1047-SMWO Smooth Right Side Open Car Door (Assembled) without Curtain Rod Hole and Without Bead Around Hing $ B-1047-HH Hidden Hinge Right Side Open Car Door (Assembled) $ Window Assembled Doors B Window Left Door $2, B Window Right Door $2, DOORCRATE Crating Charge for 3-Window Coupe Door $50.00 Model A Door Skins A-1040-A 28-29Left Side Open Car Door Skin $ A-1041-A 28-29Right Side Open Car Door Skin $ A-1040-ASM 28-29Left Side Open Car Smooth Door Skin $ A-1041-ASM 28-29Right Side Open Car Smooth Door Skin $ A-1044-A 28-29Left Side Open Car Complete Door Inner Panel $ A-1045-A 28-29Right Side Open Car Complete Door Inner Panel $ A-1040-B 30-31Left Side Open Car Door Skin $ A-1041-B 30-31Right Side Open Car Door Skin $ A-1040-BSM 30-31Left Side Open Car Smooth Door Skin $ A-1041-BSM 30-31Right Side Open Car Smooth Door Skin $ A-1044-B 30-31Left Side Open Car Complete Door Inner Panel $ A-1045-B 30-31Right Side Open Car Complete Door Inner Panel $ Open Car Door 32 Roadster Door (Hinges Sold Separately) 3 Window Doors Accurate In Every Detail CustomerService@BrookvilleRoadster.com

92 Sheet Metal Components Doors and Components (Continued) 1932 Roadster Door Skins B-1040 Left Side Stock Outer Door Skin (with notches & beads around Hinges) $ B-1041 Right Side Stock Outer Door Skin (with notches & beads around Hinges) $ B-1040-SM Left Side Smooth Outer Door Skin (with no holes or notches for Hinges) $ B-1041-SM Right Side Smooth Outer Door Skin (with no holes or notches for Hinges) $ B-1044 Complete Left Side Inner Door Panel $ B-1045 Complete Right Side Inner Door Panel $ Window Door Skins B Window Left Door Skin (Specify Smooth or Stock) $1, B Window Right Door Skin (Specify Smooth or Stock) $1, B Window Left Inner Door Skin $1, B Window Right Inner Door Skin $1, Model A Sill Plates A Roadster & Phaeton Front Sill Plates $ pr A-1033-R Roadster Pickup Sill Plates $ pr A-1033-P Phaeton Rear Sill Plates $ pr A-1034-A Roadster, Roadster Pickup & Phaeton Sill Plate Brackets $40.00 pr 1932 Door Sills (Sold In Pairs Only) B Stainless Steel Roadster Door Sills $85.00 B Zinc Roadster Door Sills $85.00 B Stainless Steel 3-Window Door Sills $85.00 B Zinc 3-Window Door Sills $85.00 B Stainless Steel 5-Window & Tudor Door Sills $85.00 B Zinc 5-Window & Tudor Door Sills $85.00 Model A Door Components A A Front Door Hinges for Roadster, Roadster Pickup & Phaeton (2 pair) $ A-35655/56-AR 1928 Open Car Door Latch (inside handle only) $48.00 pr A-35655/56B Open Car Door Latch (uses outside door handle) $48.00 pr A B 30-31Front Door Hinges for Roadster, Roadster Pickup & Phaeton (2 pair) $ A Open Car Striker Plate $12.00 A A 28-29Open Car Dove Tail $9.00 A ADB 28-29Open Car Door Bumper Set with Female Dovetails $12.00 set A BDB 30-31Open Car Door Bumper Set with Female Dovetails $12.00 set A S 28-32Open Car Leather Door Check Straps with Stainless Hardware $25.00 kit A C 28-34Open Car Inside Door Handle $12.00 A ALK Aluminum Knobs For Inside Door Latches $20.00 pr A and Up Escutcheon Spring $2.00 B B Open Car Door Check Brackets $20.00 pr A Lower Door Seal $16.00 A-1046/7-BCH Door Seal Metal Channels $12.00 pr 1932 Roadster Door Components B Roadster Door Hinges (Set of 4) $ B Left Door Latch $ B Right Door Latch $ B Roadster Door Strikers $15.00 B SS Stainless Steel Roadster Dovetails (2 Male, 2 Female) $60.00 set B Roadster Door Hinge $ B Roadster Inside Door handles $50.00 pr B-137 Roadster Door Handle Pulls $14.00 pr B Black Roadster Dovetails (2 Male, 2 Female) $35.00 set B46440 Door Rubber Bumpers $2.00 B L7 32 Roadster Door 7 Loop Type Check Strap $20.00 A S Open Car Door Leather Check Strap with SS Hardware $25.00 kit B B Open Car Door Check Bracket (T-Loop Type) $20.00 pr Roadster Sill Plates Front Door Hinges Front Door Hinges 28 Door Latch 32 Door Hinges 32 Door Latch Outside Door Handles A Stainless Steel Outside Door Handles $ Please Note: Primer is for illustrative use only. Bodies and sheet metal components do not come primered

93 Doors and Components (Continued) Sheet Metal Components Window Door Components B Window Door Hinges (Set of 6) $ set B Window Left Door Latch $ B Window Right Door Latch $ B SHDP Stainless Steel Door Hinge Pins (Set of 6) $20.00 set B-2048-FDTB 3-Window Black Female Dovetails $20.00 pr B-2048-DT 3-Window Plain Female and Stainless Steel Male Dovetail Set $65.00 set B-2048-FDT 3-Window Stainless Steel Female Dovetails $25.00 pr B-2048-MDT 3-Window Stainless Steel Male Dovetails (1 Pair) $16.00 pr B-2048-DTSS 3-Window Male and Female Stainless Steel Dovetail Set (4 Male, 2 pair Female) $80.00 set B Window Door Striker Plate $ Window Right Outside Door Handle (non-locking) $ Window Left Outside Door Handle (non-locking) $ /1L 3-Window Locking Outside Door Handles (1 Pair) $75.00 pr B E 3-Window Inside Door Handles $15.00 B DHS 3-Window Door Hinge Screws (for 6 Hinges) $20.00 set B L7 3-Window Coupe 7 Inch T-Loop Door Check Strap $25.00 B S Check Strap Retainer for #B LT $5.00 B E 3-Window - Window Riser handle $15.00 B-2046-IDW 3-Window Left Inner Door Wood $25.00 B-2047-IDW 3-Window Right Inner Door Wood $25.00 Model A Door Latch Kits A-1048-A 1928 Style Door Bumper & Dovetail Kit for smooth doors $50.00 (includes door bumpers, stainless steel male dovetails, inside aluminum door knobs) A-1048-AS 1929 Style Door Bumper, Dovetail & Handle Kit for stock doors $ (includes door bumpers, stainless steel male dovetails, outside door handles, handle pads) A-1048-B Style Door Bumper & Dovetail Kit for smooth doors $75.00 (includes door bumpers, stainless steel male dovetails, inside aluminum door knobs, lower door seal, seal channels) A-1048-BS Door Bumper, Dovetail & Handle Kit for stock doors $ (includes door bumpers, stainless steel male dovetails, outside door handles, handle pads, inside door handles, lower door seal, seal channels) 1932 Roadster Door Latch Kits B-1048 Roadster Plain Smooth Door Bumper & Dovetail Kit - Includes 2 Plain $60.00 kit Female Dovetails, 2 SS Male Dovetails, 4 Rubber Bumpers & 1 Pair Escutcheon Plates B-1048-SS Roadster SS Smooth Door Bumper & Dovetail Kit - Includes 2 SS $85.00 kit Female Dovetails, 2 SS Male Dovetails, 4 Rubber Bumpers & 1 Pair Escutcheon Plates B-1049 Roadster Plain Stock Door Bumper, Dovetail & Door Handle Kit - $ kit Includes 2 Plain Female Dovetails, 2 SS Male Dovetails, 4 Rubber Door Bumpers, 2 Outside Handles, 2 Door Handle Pads & 1 Pair Escutcheon Plates B-1049-SS Roadster SS Stock Door Bumper, Dovetail & Door Handle Kit - $ kit Includes 2 SS Female Dovetails, 2 SS Male Dovetails, 4 Rubber Door Bumpers, 2 Outside Handles, 2 Door Handle Pads & 1 Pair Escutcheon Plates Window Door Jam and Door Wood Metal Covers B-2046-DJLC Window Left Door Jam Lower Sheet Metal Cover $85.00 ea B-2046-DJUC Window Left Door Jam Upper Sheet Metal Cover $85.00 B-2047-DJLC Window Right Door Jam Lower Sheet Metal Cover $85.00 B-2047-DJUC Window Right Door Jam Upper Sheet Metal Cover $85.00 B-2048-DJC Window Upper & Lower Door Jam Metal Covers 4-pc Set $ B-2046-BC Window Left Bottom Door Closer Plate $ B-2046-UC Window Left Upper Door Closer Plate $ B-2047-BC Window Right Bottom Door Closer Plate $ B-2047-UC Window Right Upper Door Closer Plate $ B-2048-CP Window Upper & Bottom Door Closer Plate 4 pc. Set $ Engineered To Fit Like The Originals Upper & Bottom Door Closer Plate Set CustomerService@BrookvilleRoadster.com

94 Sheet Metal Components Doors and Components (Continued) Window Door Handle & Latch Kits B-2048-D 3-Window Plain Smooth Door & Inside Handle Kit - Includes $ kit 2 Pair Plain Female Dovetails, 2 Pair SS Male Dovetails, 4 Rubber Door Bumpers, 2 Inside Door Handles, 1 Pair Escutcheon Plates & Suicide Door Safety Kit B-2048-SS 3-Window SS Smooth Door & Inside Handle Kit - Includes $ kit 2 Pair SS Female Dovetails, 2 Pair SS Male Dovetails, 4 Rubber Door Bumpers, 2 Inside Door Handles, 1 Pair Escutcheon Plates & Suicide Door Safety Kit B Window Plain Stock Door, Dovetail, Inside & Outside Kit $ kit Door Handle Kit - Includes 2 Pair Plain Female Dovetails, 2 Pair SS Male Dovetails, 4 Rubber Door Bumpers, 2 Inside Door Handles, 2 Outside Door Handles, 1 Pair Escutcheon Plates & Suicide Door Safety Kit B-2049-SS 3-Window SS Stock Door, Dovetail, Inside & Outside Kit $ kit Door Handle Kit - Includes 2 SS Plain Female Dovetails, 2 Pair SS Male Dovetails, 4 Rubber Door Bumpers, 2 Inside Door Handles, 2 Outside Door Handles, 1 Pair Escutcheon Plates & Suicide Door Safety Kit B-2048-ASDSK 3-Window Aluminum Suicide Door Safety Kit $ kit B-2049 Door Latch & Handle Kit Suicide Door Safety Latch Kit 3 Window Locking Door Handles 1932 Roadster Body Metal Interior Panels B-100-MIP Roadster Metal Interior Panels - Set Includes: Surround Behind The Seat (Trim To Fit), Door Panels & Kick panels, Complete Set $ B-100-SBS Roadster Metal Interior Surround Behind The Seat (Trim To Fit) $ B-1046/47-MDP Roadster Metal Interior Door Panel Set $ B-1046-MDP Roadster Metal Interior Left Door Panel $ B-1047-MDP Roadster Metal Interior Right Door Panel $ B-114-MKP Roadster Metal Kick Panel Set $ B-114-MKPL Roadster Metal Left Kick Panel $ B-114-MKPR Roadster Metal Right Kick Panel $ Window Manual Window Door Kit B2048-MWDK Window Manual Window Door Kit $ Manual Kit Includes the Following: (priced for individual purchase) Coupe Right Door Manual Window Regulator $ Coupe Left Door Manual Window Regulator $85.00 B W Window Door Window Channel Kit $84.00 kit B Door Glass-to-Metal Channel Seal $ Window Right Door Glass Channel $ Window Left Door Glass Channel $ WGP Window Side Glass Patterns $25.00 pr 3 Window Manual Side Window Package Window Power Window Door Kit B2048-P Window Power Window Door Kit - Includes Nu-Crank and Wiring Harness $ Power Kit Includes the Following: (priced for individual purchase) P Window Right Door Power Window Regulator $ P Window Left Door Power Window Regulator $ B W Window Door Window Channel Kit $84.00 kit B Door Glass To Metal Channel Seal $ Window Right Door Glass Channel $ Window Left Door Glass Channel $ WGP Window Side Glass Patterns $25.00 pr 3 Window Power Side Window Package

95 Sheet Metal Components Garnish Moldings Door Garnish Moldings and Rear Window Channels A-342-A Coupe & Tudor Door Garnish Moldings $ pr A-342-B Coupe & Tudor Door Garnish Moldings $ pr A-442-ABR Tudor Rear Side Window Door Garnish Moldings $ pr A-442-B Tudor & Closed Cab Pickup Door Garnish Moldings $ pr A-842-A Closed Cab Pickup Door Garnish Moldings $ pr A Rear Window Channel $48.00 A-459-LONG Rear Window Channel for Tudor Sedan $ Window Garnish Moldings B Window Coupe Door Garnish Molding, (3-Piece Set) $1, B-242-LSW 3-Window Coupe Left Side Window Garnish Molding $ B-242-RSW 3-Window Coupe Right Side Window Garnish Molding $ B-242-RW 3-Window Coupe Rear Window Garnish Molding $ B-242-WWM 3-Window Coupe Side Windshield Garnish Molding $ Quarter Panels and Bracing Model A Quarter Panels and Components A-2050-A Left Roadster Quarter Panel with Braces $ A-2050-A WO Left Roadster Quarter Panel without Braces $ A-2050-A BR Left Roadster Quarter Panel Braces $ A-2051-A Right Roadster Quarter Panel with Braces $ A-2051-A WO Right Roadster Quarter Panel without Braces $ A-2051-A BR Right Roadster Quarter Panel Braces $ A-2050-A EXTC Roadster Quarter Panel Extrusion (bent) $ pr A-1050-A Left Roadster Pickup Quarter Panel with Braces $ A-1050-A WO Left Roadster Pickup Quarter Panel without Braces $ A-1050-AEXT Left Extended Roadster Pickup Quarter Panel with Braces $ A-1050-AEXT WO Left Extended Roadster Pickup Quarter Panel without Braces $ A-1051-AEXT Right Extended Roadster Pickup Quarter Panel with Braces $ A-1051-AEXT WO Right Extended Roadster Pickup Quarter Panel without Braces $ A-1050-A BR Left Roadster Pickup Quarter Panel Braces $ A-2050-ABRLOWER28-29 Roadster Lower Quarter Panel Post Braces $32.00 A-1051-A Right Roadster Pickup Quarter Panel with Braces $ A-1051-A WO Right Roadster Pickup Quarter Panel without Braces $ A-1051-A BR Right Roadster Pickup Quarter Panel Braces $ A Roadster Pickup Upholstery Channels $75.00 pr A-2050-B Left Roadster Quarter Panel with Braces $ A-2050-B WO Left Roadster Quarter Panel without Braces $ A-2050-B BR Left Roadster Quarter Panel Braces $ A-2050-BBRLOWER30-31 Roadster Lower Quarter Panel Post Braces $32.00 A-2051-B Right Roadster Quarter Panel with Braces $ A-2051-B WO Right Roadster Quarter Panel without Braces $ A-2051-B BR Right Roadster Quarter Panel Braces $ A-2050-A EXT T-Shaped Aluminum Extrusion (straight) $ pr A-2050-A TT Top Iron Tab (Attaches Top Irons to Quarter Panel) $20.00 pr A-2050-A TTSS Top Iron Tab (Attaches Top Irons to Quarter Panel) Stainless $30.00 pr A-2050-B TT Top Iron Tab (Attaches Top Irons to Quarter Panel) $20.00 pr A-2050-B TTSS Top Iron Tab (Attaches Top Irons to Quarter Panel) Stainless $30.00 pr A-2050-BRU Rear Upper Quarter Panel Brace $20.00 A-2050-BFU Front Upper Quarter Panel Brace $40.00 A-2050-BPOST Roadster Quater Panel Post Brace $95.00 A-2050-BRGH Reinforcement Plate For Grab Handles $32.00 pr B SS SS Rumble Seat Grab handles $60.00 pr A-1010-BUBUB Open Car Upper Upholstery Brace $ Coupe Garnish Moldings 32 3-Window Side Window Garnish Moldings 32 3-Window Rear Window Garnish Molding CustomerService@BrookvilleRoadster.com

96 Sheet Metal Components Quarter Panels and Bracing (Continued) Model A Roadster Pickup Cab-Backs, Quarter Panels, and Components A-877-A Cab Back $ A-877-A BR Cab Back Braces $ pr A-877-B Cab Back $ A-877-B BR Cab Back Braces $ pr A-877-BP Extended Cab Back Stamping Only $ A-877-B EXT Extended Cab Back With Braces $ A-850-B Pickup Cab Back Patch Panel 4 Feet Long with Bead $75.00 A-1050-B Left Quarter Panel With Braces $ A-1050-BWO Left Quarter Panel Without Braces $ A-1050-BEXT Left Quarter Panel For Extended Cab With Braces $ A-1050-BEXTWO Left Quarter Panel For Extended Cab Without Braces $ A-1051-B Right Quarter Panel With Braces $ A-1051-BWO Right Quarter Panel Without Braces $ A-1051-BEXT Right Quarter Panel For Extended Cab With Braces $ A-1051-BEXTWO Right Quarter Panel For Extended Cab Without Braces $ Roadster Quarter Panels, Braces, and Components B-2050 Left Roadster Quarter Panel with Braces $ B-2051 Right Roadster Quarter Panel with Braces $ B-2050-ORIGINAL Left Roadster Quarter Panel with Braces B-2051-ORIGINAL (for Brookville original style body) $ Right Roadster Quarter Panel with Braces (for Brookville original style body) $ B-2050-WO Left Roadster Quarter Panel without Braces $ B-2051-WO Right Roadster Quarter Panel without Braces $ B-2050-BR Braces for Left Roadster Quarter Panel $ set B-2051-BR Braces for Right Roadster Quarter Panel $ set B-2052 Front Quarter Panel Posts $ pr B-2053 Front Lower Quarter Panel Post Braces $ pr Cab Back Quarter Panel Braces 32 Front Quarter Panel Braces Roadster Rumble and Quarter Panel Braces B-162 Rumble Compartment Braces $ pr B-166 Front Quarter Panel Braces $ pr Window Coupe Body Sides B-2050-LBS Complete Left Body Side from Front of Cowl to Rear Quarter Panel $3, B-2051-RBS Complete Right Body Side from Front of Cowl to Rear Quarter Panel $3, Rumble Compartment Braces 32 Front Lower Quarter Panel Braces Quarter Panel Original Style 32 Quarter Panel Please Note: Primer is for illustrative use only. Bodies and sheet metal components do not come primered. EXCLUSIVE DESIGN!

97 Sheet Metal Components Deck Lids and Components Model A Assembled Deck Lids A-1059-A Coupe & Roadster Rumble Lid $ A-1059-B Coupe & Roadster Rumble Lid $ A-1059-AT Coupe & Roadster Trunk Lid $ A-1059-BT Coupe & Roadster Trunk Lid $ A-1059-ABSM Coupe & Roadster Smooth Lid $ A-1059-ASMT Coupe & Roadster Smooth Trunk Lid $ A-1059-BSMT Coupe & Roadster Smooth Trunk Lid $ & Roadster And Coupe Louvered Deck Lids A-1059-A5RL Rumble Lid With Handle Hole, With 5 Row Louvers $ A-1059-A6RL Rumble Lid With Handle Hole, With 6 Row Louvers $ A-1059-A7RL Rumble Lid With Handle Hole, With 7 Row Louvers $ A-1059-B5RL Rumble Lid With Handle Hole, With 5 Row Louvers $ A-1059-B6RL Rumble Lid With Handle Hole, With 6 Row Louvers $ A-1059-B7RL Rumble Lid With Handle Hole, With 7 Row Louvers $ A-1059-AT5RL Trunk Lid With Handle Hole, With 5 Row Louvers $ A-1059-AT6RL Trunk Lid With Handle Hole, With 6 Row Louvers $ A-1059-AT7RL Trunk Lid With Handle Hole, With 7 Row Louvers $ A-1059-BT5RL Trunk Lid With Handle Hole, With 5 Row Louvers $ A-1059-BT6RL Trunk Lid With Handle Hole, With 6 Row Louvers $ A-1059-BT7RL Trunk Lid With Handle Hole, With 7 Row Louvers $ A-1059-ASM5RL Smooth Deck Lid With 5 Row Louvers $ A-1059-ASM6RL Smooth Deck Lid With 6 Row Louvers $ A-1059-ASM7RL Smooth Deck Lid With 7 Row Louvers $ A-1059-BSM5RL Smooth Deck Lid With 5 Row Louvers $ A-1059-BSM6RL Smooth Deck Lid With 6 Row Louvers $ A-1059-BSM7RL Smooth Deck Lid With 7 Row Louvers $ Deck Lids B-1059 Rumble Lid (with outside handle hole) $ B-1059-SM Smooth Rumble Lid $ B-1059-T Trunk Lid (with outside handle hole) $ B-1059-TSM Smooth Trunk Lid $ Roadster & 5 Window Coupe Louvered Deck Lids B-1059-SM5RL Smooth Deck Lid With 5 Row Louvers $ B-1059-SM6RL Smooth Deck Lid With 6 Row Louvers $ B-1059-SM7RL Smooth Deck Lid With 7 Row Louvers $ B-1059-T5RL Stock Trunk Lid With Handle Hole, With 5 Row Louvers $ B-1059-T6RL Stock Trunk Lid With Handle Hole, With 6 Row Louvers $ B-1059-T7RL Stock Trunk Lid With Handle Hole, With 7 Row Louvers $ Window Deck Lids B Window Stock Rumble Lid $ B-2059-SM Window Smooth Rumble Lid $ B-2059-T Window Stock Trunk Lid w/outside Handle Hole $ B-2059-TSM Window Smooth Trunk Lid $ Window Coupe Louvered Deck Lids B-2059-TSM5RL Smooth Trunk Lid With 5 Row Louvers $ B-2059-TSM6RL Smooth Trunk Lid With 6 Row Louvers $ B-2059-TSM7RL Smooth Trunk Lid With 7 Row Louvers $ B-2059-T5RL Stock Trunk Lid With Handle Hole, With 5 Row Louvers $ B-2059-T6RL Stock Trunk Lid With Handle Hole, With 6 Row Louvers $ B-2059-T7RL Stock Trunk Lid With Handle Hole, With 7 Row Louvers $ Model A Deck Lid Skins A-1059-ABS Coupe & Roadster Outer Deck Lid Skin $ A-1059-AOR Stock Rumble Outer Deck Lid Skin $ A-1059-BOR Stock Rumble Outer Deck Lid Skin $ A-1059-ABT Roadster and Coupe Stock Trunk Outer Deck Lid Skin $ A-1059-AIS Coupe & Roadster Inner Rumble Lid Panel $ A-1059-BIS Coupe & Roadster Inner Rumble Lid Panel $ A-1059-AIT Coupe & Roadster Inner Trunk Panel $ A-1059-BIT Coupe & Roadster Inner Trunk Panel $ Window Deck Lid 32 Smooth Rumble Lid Coupe & Roadster Rain Gutter CustomerService@BrookvilleRoadster.com

98 Sheet Metal Components Deck Lids and Components (Continued) Model A Louvered Outer Deck Lid Skins Only A-1059-ABS5RL Smooth Outer Deck Lid Skin With 5 Row Louvers $ A-1059-ABS6RL Smooth Outer Deck Lid Skin With 6 Row Louvers $ A-1059-ABS7RL Smooth Outer Deck Lid Skin With 7 Row Louvers $ A-1059-ABT5RL Outer Trunk Lid Skin With Handle Hole, With 5 Row Louvers $ A-1059-ABT6RL Outer Trunk Lid Skin With Handle Hole, With 6 Row Louvers $ A-1059-ABT7RL Outer Trunk Lid Skin With Handle Hole, With 7 Row Louvers $ Deck Lid Skins B-1059-OS Outer Deck Lid Skin (with outside handle hole) $ B-1059-OSM Smooth Outer Deck Lid Skin $ B-1059-IS Inner Deck Lid Skin $ Roadster & 5 Window Coupe Louvered Deck Lid Skins Only B-1059-OSM5RL Smooth Outer Deck Lid Skin With 5 Row Louvers $ B-1059-OSM6RL Smooth Outer Deck Lid Skin With 6 Row Louvers $ B-1059-OSM7RL Smooth Outer Deck Lid Skin With 7 Row Louvers $ B-1059-OST5RL Stock Outer Trunk Lid Skin With Handle Hole, With 5 Row Louvers $ B-1059-OST6RL Stock Outer Trunk Lid Skin With Handle Hole, With 6 Row Louvers $ B-1059-OST7RL Stock Outer Trunk Lid Skin With Handle Hole, With 7 Row Louvers $ Window Deck Lid Skin B-2059-OSR Window Outer Deck Lid Skin w/hole for Rumble $ B-2059-OST Window Outer Deck Lid Skin w/hole for Trunk $ B-2059-OSM Window Smooth Outer Deck Lid Skin $ B-2059-IS Window Inner Deck Lid Skin $ Window Coupe Louvered Deck Lid Skins Only B-2059-OSM5RL Smooth Outer Trunk Lid Skin With 5 Row Louvers $ B-2059-OSM6RL Smooth Outer Trunk Lid Skin With 6 Row Louvers $ B-2059-OSM7RL Smooth Outer Trunk Lid Skin With 7 Row Louvers $ B-2059-OST5RL Stock Outer Trunk Lid Skin With Handle Hole, With 5 Row Louvers $ B-2059-OST6RL Stock Outer Trunk Lid Skin With Handle Hole, With 6 Row Louvers $ B-2059-OST7RL Stock Outer Trunk Lid Skin With Handle Hole, With 7 Row Louvers $ Model A Hinge Kits and Hardware A-1059-ABT H Coupe & Roadster Trunk Hinge Kit $72.00 A-1059-ABR H Coupe & Roadster Rumble Hinge Kit $ A-1059-ABDLH Locking Deck Lid Handle $49.00 A-1059-ABTL Rumble & Trunk Latch $25.00 A-1059-BRL Rumble Lid Latch $25.00 A-1059-TP Trunk Prop Kit $65.00 A-1059TPSS SS Trunk Prop Kit $85.00 kit A-1059TPSB Trunk Prop Shoulder Bolt With Washer Installed (3/8-16 bolt, 3/8 shoulder) $9.00 A-1059-ABC Roadster and Coupe Trunk Catch $10.00 A-1059-ABSP Rumble Lid Striker Plate $12.00 A-543-AR Rumble Seat Stops with Rubber Bumpers $69.00 pr A-543-BR Rumble Seat Stops with Rubber Bumpers $69.00 pr A-543-A Rumbles Seat Stops Only $53.00 pr A-543-B Rumble Seat Stops Only $53.00 pr B S Rumble Lid Bumper Kit (2 round, 2 square,4 screws) $7.00 kit B Trunk Rubber Bumper Kit (2 round) $5.00 kit Locking Deck Lid Handle 28 Trunk Latch 32 3-Window Inner Decklid 32 Below Deck Lid Panel Trunk Hinge Kit 32 Rumble Hinge Kit 32 Rain Gutter Set 1932 Deck Lid Hinge Kits B-1059-H Rumble Hinge Kit $ kit B-1058-H Stainless Steel Outside Deck Lid or Rumble Handle $49.00 B-1059-TPK Trunk Prop Kit $65.00 kit B-1059-TPK-SS SS Trunk Prop Kit $85.00 kit B-1059-C Roadster Trunk Catch $10.00 B-1059-CSS Roadster Trunk Catch Stainless Steel $35.00 A Rumble Striker Plate $

99 Sheet Metal Components Deck Lids and Components (Continued) Window Deck Lid Hardware B-2059-TH Window Trunk Hinge Kit $75.00 B-2059-TPK Window Trunk Prop Kit $65.00 B-2059-TPK-SS Window SS Trunk Prop Kit $85.00 B-2059-C Window Deck lid Catch (Rivets to Trunk Inner Panel) $25.00 B-2059-CSS Window Deck lid Catch Stainless (Rivets to Trunk Inner Panel) $ Model A Rain Gutter and Trunk Panels A-169-A Coupe & Roadster Rain Gutter (fits around trunk or rumble lid opening) $ set A-169-AT Upper Rain Gutter Trough (goes from side to side) $ A-169-AS Rain Gutter Sides $ pr A-169-B Coupe & Roadster Rain Gutter (fits around trunk or rumble lid opening) $ set A-169-BT Upper Rain Gutter Trough (goes from side to side) $ A-169-BS Rain Gutter Sides $ pr A-169-AB Triangle Corners (fit in each corner of rain gutter) $40.00 pr Panel Above & Below Deck Lid A-361-A Coupe with Rumble Seat Curved Inner Panel $ A-161-A Roadster & Coupe with Rumble Seat Curved Inner Panel $ A-161-ABTR Coupe & Roadster Trunk Panel (Inner Panel used for Trunk) $ A-159-A Coupe & Roadster Rumble Seat Platform $ A-151-A Coupe & Roadster Rumble Seat Floor (used with Seat Riser) $99.00 A-351-B Coupe Rumble Seat Floor (Flat Panel) $99.00 A Triangle Pieces (fit on each side of trunk compartment at the rear, Curved Inner Panel fastens to these pieces) $99.00 pr A-366-A Coupe Front Trunk or Rumble Compartment Braces $79.00 pr A-166-A Roadster Front Trunk or Rumble Compartment Braces $79.00 pr A-166-B Roadster Front Trunk or Rumble Compartment Braces $79.00 pr A-162-A Rumble Hinge Braces $79.00 pr A-162-B Rumble Hinge Braces $79.00 pr A-161-ABTRANGLE Inner Trunk Panel Angle Brace $20.00 Model A Above and Below the Deck Lid Panels A-363-A Coupe Body Panel below Trunk Lid (short panel) $85.00 A-163-A Roadster Panel below Trunk Lid (high panel) $85.00 A-163-B Coupe & Roadster Body Panel Below Trunk Lid (with bead at bottom) $85.00 A-163-A BR Spare Tire Bracket $40.00 A-167-A Roadster Panel Above Deck Lid $ A-167-B Roadster Panel Above Deck Lid $ A-125-B Roadster Seat Adjuster $78.00 A-129-B Roadster Package Tray $ Roadster Rain Gutter and Trunk Panels B-164 Rain Gutter (fastens on Below Deck Lid Panel when a trunk is being used) $ ea B-169 Rain Gutter (goes around the Trunk or Rumble opening) $ set B-169-UT Upper Rain Gutter Trough $ ea B-169-S Rain Gutter Sides $ pr A-169-AB Triangle Corners (fits corners on Rain Gutters) $40.00 pr B-160 Triangle Corners $ pr B-169-TD 32 Stainless Trunk Drains (includes 2 machined drain screws, 2 nuts) $ pr 1932 Roadster Above and Below Deck Lid Panels B-167 Above the Deck Lid Panel (Die Stamped with all bracing in place) $ B-163 Below Deck Lid Panel (Includes Upper Brace, Center Brace & Extension Pan) $ B-163-EB Below the Decklid End Brace $10.00 B-163-P Below Deck Lid Panel, Outer Panel Only $ B-163-UB Below Deck Lid Upper Brace $79.00 B-163-CB Below Deck Lid Center Brace $52.00 B Window Coupe Below Deck Lid Panel (die stamped) $ B-363-H 5-Window Coupe Below Deck Lid Panel (Howells) $ Panel Above & Below Deck Lid Curved Inner Panel Coupe Rumble Seat Floor Roadster Rumble Platform Rumble Hinge Brace Rumble Hinge Brace CustomerService@BrookvilleRoadster.com

100 Sheet Metal Components Deck Lids and Components (Continued) Window Rain Gutter and Trunk Panels B Window Rain Gutter Set (3-Piece Set) $ set B-269-S Window Rain Gutter Sides $ B-269-UT Window Rain Gutter Upper Trough $ B Window Rain Gutter Lower Trough (Used with Trunk) $ B-269-TD Window SS Trunk Drain (includes 2 machined drain screws, 2 nuts) $ kit Window Below Deck Lid Panel and Braces B Window Below Deck Panel with Lower Brace and Center Brace,(3-Piece Set) $ set B-263-P 3-Window Below Deck Lid, Panel only $ B-263-CB 3-Window Below Deck Lid Panel Center Brace with All Holes $ B-263-LB 3-Window Below Deck Lid Panel Lower Brace $ Hidden Deck Lid Latch Kits 1032-DLK-STL 1932 Ford Deck Lid Hidden Latch Kit (2081) $ DLK 1934 Ford Deck Lid Hidden Latch Kit (2082) $ DLK-SLB 1937 Ford Slant Back Latch Kit (2083) $ DLK Ford Latch Kit (2086) $ DLK Ford Coupe Latch Kit, Except 38 Standard (2084) $ DLKSDN Ford Sedan Latch Kit (2085) $ Deck Lid Support Kits 2032-DLK-STL 1932 Ford Roadsters,5 Window Coupes, Cabriolets (2075) $ DLK-STL Fords, Roadsters, Any Coupes, Cabriolets (2076) $ Sun Visors and Other Parts Sun Visors A-317-A Coupe & Sedan Sun Visor $85.00 A-817-A Closed Cab Pickup Sun Visor (Also works with Model T) $ B-47380/82 3-Window Coupe Sun Visor Bracket Kit $80.00 kit Window Interior Bracing B-3053-LB Window Lower Door Post Braces $ pr B-3053-UB Window Upper Braces (Tie Door Post to Roof Wood Insert) $ pr B-3053-RUB Window Rear Upper Upholstery Braces $ pr B-500-MB Window Front Metal Bracket (Supports Front Roof Wood to Upper Header Panel) $ Window Rear Window Panels B Window Coupe Rear Window Roof Panel $1, B Window Rear Window Drain $95.00 Rear Window Drains B Window Rear Window Drain $ Window & 5-Window Rear Window Drain $ B-332-A Model "A" Rear Window Drain for Roll-Up Window $ Latch Kit 32 Latch Kit & Deck Lid Supports Shown Installed Rear Window Drain Pan Coupe & Sedan Sun Visor Below Deck Lid Panel with Lower Brace and Center Brace Window Rear Interior Bracing B Window Coupe Rear Triangle Braces $ pr B Window Coupe Front Quarter Panel Braces $ pr Window Rear Window Kit B-247-RWK Window Rear Window Kit $80.00 B-247-PI Window Power Rear Window Kit - Installed $ B-247-P Window Power Rear Window Kit - Not Installed $ Rear Window Kits Include: (priced for individual purchase) A Window Back Roll Down Window Channel Kit $60.00 kit B Window Rear Roll Down Metal Glass Channel $14.00 A B Hole Rear Roll Up Window Regulator (Included In Body) $ Windshield Crank out Regulator Handle $ Rear Triangle Braces Below Deck Lid Panel Lower Brace

101 Sheet Metal Components Patch Panels Complete Patch Panel Kits Our Patch Pannel Kits are a great place to start to restore your original body! A-100-APK Roadster Body Patch Kit $ set includes Door, Quater, Wheel Well,and Corner Patch Panels A-300-APK Coupe Body Patch Kit $ set includes Door, Quater, Wheel Well,and Corner Patch Panels A-400-APK Sedan Body Patch Kit $ set includes Door, Quater and, Wheel Well Patch Panels A-100-BPK Roadster Body Patch Kit $ set includes Door, Quater, Wheel Well,and Corner Patch Panels A-300-BPK Coupe Body Patch Kit $ set includes Door, Quater, Wheel Well,and Corner Patch Panels A-400-BPK Sedan Body Patch Kit $ set includes Door, Quater, Wheel Well,and Corner Patch Panels B-100-PK 32 Roadster Body Patch Kit $ set includes Door, Quater and, Wheel Well Patch Panels Cowl Patch Panels A-114-B Model "A" Cowl Patch Panels Fits All Models $79.00 pr B Ford Cowl Panel Patches (All Models) $79.00 pr 91A Ford Deluxe & 40 Front Fender Apron Patch $89.00 pr Door Bottom Patch Panels A-136-A Roadster Door Bottom Patch Panels $79.00 pr A-336-A Coupe and Sedan Door Bottom Patch Panels $79.00 pr A-836-A Closed Cab Pickup Door Bottom Patch Panels $85.00 pr A-136-B Roadster Door Bottom Patch Panels $79.00 pr A-336-B Coupe Door Bottom Patch Panels $79.00 pr A-436-B SedanDoor Bottom Patch Panels $79.00 pr A-836-B Closed Cab Pickup Door Bottom Patch Panels $79.00 pr B Roadster Door Bottom Patch Panels $79.00 pr B Window Coupe Door Bottom Patch Panels $79.00 pr B Tudor Sedan Door Bottom Patch Panels $79.00 pr B Pickup Door Bottom Patch Panels $79.00 pr Window Coupe Door Bottom Patch Panels $79.00 pr Window Coupe Door Bottom Patch Panels $79.00 pr Quarter Patch Panels A-150-A Roadster Quarter Panel Patch $79.00 pr A-350-A Coupe & Sedan Quarter Panel Patch $79.00 pr A-150-B Roadster Quarter Panel Patch $79.00 pr A-350-B Coupe Quarter Panel Patch $79.00 pr A-450-B Sedan Quarter Panel Patch $79.00 pr B Roadster Quarter Patch Panels $79.00 pr Window Quarter Patch Panels $79.00 pr 01A Ford Quarter Patch Panels $79.00 pr Coupe Quater Patch Panels $79.00 pr Wheel Well Patch Panels A Roadster Under Rear Fender Wheel Well Patch $79.00 pr A Coupe Under Rear Fender Wheel Well Patch $79.00 pr A Sedan Under Rear Fender Wheel Well Patch $79.00 pr B Window and Roadster Under Rear Fender Wheel Well Patch $ pr Cab Back Patch A-850-B Cab Back Patch, 4 Feet Long $79.00 B Cab Back Patch, 4 Feet Long $ Rocker Patch Panels B Ford Rocker Patch Panels $69.00 pr Closed Pickup Door Bottom Patch Panels 30 Roadster Door Bottom Patch Panels 32 Roadster Quarter Patch Panels Roadster Quarter Panel Patches Roadster Quarter Wheel Well Patches 32 Under Fender Panel Patches 32 Roadster Door Bottom Patch Panel CustomerService@BrookvilleRoadster.com

102 Sheet Metal Components Wood Roadster Body Wood A-1060-A Roadster Pickup Complete Body Wood Kit $ A-1060-B Roadster Pickup Complete Body Wood Kit $ A-1021-A Roadster Pickup Wood Mounting Blocks $ A-1021-B Roadster Pickup Wood Mounting Blocks $ A-2060-A Roadster Complete Body Wood Kit $ A-2060-B Roadster Complete Body Wood Kit $ A-2021-A Roadster Wood Mounting Blocks $ A-2021-B Roadster Wood Mounting Blocks $ A-1064-AB Model "A" Wood Front Floor Boards $ A-2060-ATS Roadster Wood Tack Strip $ A-2060-BTS Roadster Wood Tack Strip $ A-1060-ATS Roadster Pickup Wood Tack Strip $ Roadster Wood Tack Strips B-2060-TS 32 Roadster Wood Tack Strip For Brookville Roadster Body $ B-2060-TSOR 32 Roadster Wood Tack Strip For Original Ford or Brookville Original Body $ Window Interior Wood B-2046-UWH Window Left Upper Door Header $ B-2046-WDJ Window Left Rear Wood Door Hinge Post $ B-2047-UWH Window Right Upper Door Header $ B-2047-WDJ Window Right Rear Wood Door Hinge Post $ B-2046-IDW Window Left Inner Door Wood $30.00 B-2047-IDW Window Right Inner Door Wood $30.00 B Window Upper & Rear Wood Door Jam Set $1, set B Window Wood Package Tray $ B-229-PWB Window Wood Blocks (Supports Package Tray to Door Post) $45.00 set B-267-RWW Window Rear Window Wood Assembly $ B-219-WHP Window Wood Header Insert $75.00 B Window Wood Roof Insert $ Window Roof Tack Strip and Interior Kit B-2075-ATS Window Aluminum Tack Strip Pre-Bent to Fit Roof Top Groove $ kit Roadster Wood Mounting Blocks 32 3-Window Rear Window Wood 32 3-Window Door Jamb Kit Model "A" Wood Front Floor Boards Brookville Steel Made In Ohio By American Steel Workers B121WB Wood Seat Back 102 Please Note: Primer is for illustrative use only. Bodies and sheet metal components do not come primered

103 Sheet Metal Components Pickup Sheet Metal and Components Model A Pickup Beds and Parts A-950-AB Stock Pickup Bed Sides with Holes $ pr A-950-AB SH " Short Bed Sides $ pr A-950-AB SM Smooth Stock Length Bed Sides $ pr A-951-AB Pickup Bed Subrails (heavy support rails for wood mounting bed sill) $ pr A-952-AB Tailgate with Ford Script (includes mounting brackets - officially licensed product) $ A-952-ABWO Tailgate Without Ford Script (includes mounting brackets) $ A-952-ABLP Tailgate with hidden latch and Ford Script (includes mounting brackets - officially licensed product) $ A-952-ABLPWO Tailgate with hidden latch without Ford Script (includes mounting brackets) $ A-953-AB Pickup Bed Cross Channels (two support channels that run crossways in bed) $ set A-955-AB Pickup U-Channel (for attaching rear tailgate brackets & rear stake pockets) $ A Pickup Bed Front Panel $99.00 A-871-S Pickup Bed Front Panel (with top corner bracket spotwelded in place) $ A Pickup Bed Box Metal Pan (fits over rear cross-member) $49.00 A-872-S Pickup Bed Box Metal Pan, Stainless Steel $75.00 A Pickup Bed Strips with Pre-Punched Holes (set of 4) $85.00 set A-873-SR Street Rod Pickup Bed Strips (used without center pan, set of 4) $85.00 set A-873-SRS Street Rod Pickup Bed Strips (polished stainless, set of 4) $ set A-873-S Pickup Bed Strips with Pre-Punched Holes (set of 4, Stainless Steel) $ set A-958-AB Rear Fender Spacers (for between bed & rear fenders) $ pr A-959-A Z-Shaped Channel (fits over rear U-Channel) $65.00 A-961-A Pickup Bed Tailgate Hinges (4 piece set) $75.00 set A-967-AB Pickup Bed Tailgate Chain $9.00 A-965-AB Pickup Bed Tailgate Chain Hook $9.00 A-962-AB Pickup Bed Tailgate Chain Cover $11.00 A-963-AB Pickup Tailgate Hinge Bolt $15.00 A-964-AB Pickup Tailgate Chain Bracket $23.00 A-966-A Pickup Tailgate Lock Link (attaches chain to tailgate & locks tailgate when closed) $10.00 pr A-968-AB Pickup Bed Wood Floor, Stock (cut to correct size with strip grooves) $ A-968-SR Pickup Bed Wood Floor, Street Rod (no cutout for center pan) $ A-969-AB Bolt & Washer Set (fasten metal strips to bed wood) $55.00 set A-969-AB SS Bolt & Washer Set, Stainless Steel $69.00 set (fasten metal strips to bed wood) A-969-AB SS P Bolt & Washer Set, Polished Stainless Steel $85.00 set (fasten metal strips to bed wood) A-970-AB Pickup Bed Sills (hardwood pieces for between bed & frame) $ pr A-971-AB Pickup Bed Rivets (enough for one bed) $42.00 set A-973-AB Metal Brackets (hold wood subrails into bed) $60.00 pr A-976-AB Front Stake Pockets for Pickup Bed $95.00 set A-960-AB Pickup Bed Front Stake Pocket Reinforcement Plate $52.00 set A-960-AB SS Pickup Bed Front Stake Pocket Reinforcement Plate, Stainless Steel $80.00 set A Roadster Pickup Bed Panel Between Cab and Bed $60.00 A Roadster Pickup Bed Rear Crossmember Patch Panel $60.00 A-831-B Closed Cab Pickup Rear Crossmember $99.00 Rear Fender Spacers Stock Model A Bed Side Assembled Model A Pickup Bed Tailgate with Ford Script Pickup Beds Take The Worst Abuse Over The Years. Start With A Fresh All Steel Bed And Save Time. CustomerService@BrookvilleRoadster.com

104 Sheet Metal Components Sheet Metal and Components - Closed Cab Truck A8046ACC Left Door Closed Cab $ A8047ACC Right Door Closed Cab $ A8046ACCS Left Door Skin Closed Cab $ A8047ACCS Right Door Skin Closed Cab $ A837ACC Steel Front Floor Closed Cab $ A835ACC Pan Under Seat Standard Cab $95.00 A835AEXTCC Pan Under Seat Extended Cab $95.00 A832AF Standard Subrails Closed Cab $ pr A832AFEXTCC Extended Subrails Closed Cab $ pr A8032ACCASSEM Subframe Assembly Standard Closed Cab $ kit A8032AEXTCCASSEM Subframe Assembly Extended Closed Cab $ kit A877AUCC Upper Cab Back Closed Cab $ A877ACC Lower Cab Back Closed Cab $ A8050ACC Left Quarter Panel Standard Closed Cab $ A8051ACC Right Quarter Panel Standard Closed Cab $ A8050AEXTCC Left Quarter Panel Extended Closed Cab $ A8051AEXTCC Right Quarter Panel Extended Closed Cab $ A8010ACC Left Cowl Post Closed Cab $ A8011ACC Right Cowl Post Closed Cab $ A8050ABRCC Left Quarter Panel Front Brace B Pillar $ A8051ABRCC Right Quarter Panel Front Brace B Pillar $ A219ACC Upper Windshield Panel Closed Cab $ A236AFCC Dash Original Style Closed Cab $ A8001ACC Dash Rail Closed Cab $ A500ACC Roof Section With Braces Std. Closed Cab $ A500AEXTCC Roof Section With Braces Extd. Closed Cab $ A500ARGCC Roof Rain Gutter Closed Cab $ set A8070ACC Windshield Kit Plain (no glass) $ kit A35600ACC Door Hinges Closed Cab and Sedan $ set A35655ACC Left Door Latch Assy. $87.50 A35656ACC Right Door Latch Assy. $87.50 A8031ACC Pick Up Cross Channels Closed Cab $85.00 pr Ford Pickup Beds and Bed Components Closed Cab Doors Closed Cab Roof Panel Closed Cab Corner Panel Unassembled Bed Packages These bed packages come complete with all you need. All stake pockets are already welded in as original. Small side fillers are pre-welded. All crossmembers, front panel, Amish made Red Oak flooring, bed strips and end sill, plus all of the hardware for assembly. Also included are the correct bolts to fasten your fenders to the bedsides. Completely laser cut for NO warpage around holes. Tailgate sold separately. 8C UN F-1 Style Bed Sides. Less Tailgate $1, C UN F-1 Style Bed Sides. Less Tailgate $1, BAAA UN Stepside Style. Less Tailgate $1, Tailgates 81C P Tailgate $ C P 1941 Tailgate $ C P Tailgate $ B7C P Smooth Tailgate $ C P Tailgate $ B7C AP F-100 Tailgate $ M P Mercury Tailgate $ B7M P Mercury Tailgate $ Bed Front Panels 81C P Bed Front Panel $ C P Bed Front Panel $ BAA P Bed Front Panel $ Bed

105 Sheet Metal Components Ford Pickup Beds and Bed Components Bed Sides 81C P Bed Side- Right $ C P Bed Side- Left $ C P Bed Side- Right $ C P Bed Side- Left $ C P Bed Side- Right $ C P Bed Side- Left $ C P Bed Side- Right $ C P Bed Side- Left $ BAA P Bed Side- Right $ BAA P Bed Side- Left $ FT PP 8 Foot Long Bedsides $ Bed Side Components P Bed Side Support $ C SSP Bedside Angle Strips with Holes $60.00 pr 7C SSMP Bside Angle Strips without Holes $60.00 pr 7C TDP Tear Drop for Bed Side Roll $12.00 pr Stake Pockets 81C P Bed Stake Pocket $ C P Rear Stake Pocket Brace $40.00 pr. Bed Filler Panels 81C PR Bed Filler Panels $ C PR Bed Filler Panels $50.00 Tailgate Components Bed Side Support $ C Mild Steel Tailgate Hinge $ C SS Stainless Steel Tailgate Hinge $ C Tailgate Chain Bracket $ C S Tailgate Top Link $ C S Tailgate Chain Top Link $ C Tailgate Chain Hook $8.00 Cross Members 1C AP Bed Front Cross Member $40.00 BAAA P Bed Center Cross Member $40.00 BAAA AP Bed Rear Cross Member $ C FP Front Middle Cross Member $ C RP Rear Middle Cross Member $ C P Rear Cross Member $ C AP Front Cross Member $ C FP Front Middle Cross Member $ C RP Rear Middle Cross Member $ C P Rear Cross Member $65.00 Bed Strips 21C AP Bed Strips with Holes $ C HSSP Stainless Steel Bed Strips with Holes $ C AP Bed Strips with Holes $ C HSSP Stainless Steel Bed Strips with Holes $18.00 U PP 10 Foot Long Bedstrips $17.00 U SSP 10 Foot Long Stainless Steel Bedstrips $ F100 Tailgate Tailgate Stake Pocket CustomerService@BrookvilleRoadster.com

106 Brookville Apparel and Gifts Wear Your Body Of Steel With Pride DT BT Also Available as a Long Sleeve Shirt CT AT Also Available as a Work Shirt and Hoodie GPU CLST Available in Long Sleeve Only DWS Also only as a Work Shirt FTB Also available in White 3WBLK 106 T-Shirts Size S-XL $15.00 Size 2XL-3XL $20.00 Work Shirts Any Size $30.00 ET Available in Women s T-Shirt Only

107 Brookville Apparel and Gifts Wear Your Body Of Steel With Pride Roadster Guys Know The Value Of A Great Hat! Adjustable Hats available in Navy, Maroon, Green, Red, White, Black, and Pink. Fitted Hats are available in Small/Medium Medium/ Large Sizes. Colors available include White, Black, and White and Black Hats Any Style $20.00 Official Brookville Roadster Metal Shop Sign- $30.00 Gifts and Accessories Mug $8.00 Water Bottle $5.00 Metal Shop Sign $30.00 Small Logo Sticker $1.00 Large Logo Sticker $2.00 Oil Pan $10.00 Tote Bag $5.00 Lip Balm $2.00 Luggage Tag $5.00 Poster $5.00 CustomerService@BrookvilleRoadster.com

108 Gallery Here are just a few of the amazing hot rods built by pros and customers using Brookville Real Steel! From daily driven rods to ultimate show rods cars. These examples display the quality and performance of Brookville s all-steel bodies and components. Isn t it time to get started building yours? 1931 Hi-Boy Roadster By Reisinger Custom Rebuilders Steve Doty Owns This Super Nice 31 Roadster Pickup 108 Youngblood Hot Rod s 32 Roadster which recently set a new record of mph. in the F/BSTR Class. Another Youngblood Hot Rod s 32 Roadster which recently set a new record

109 Gallery 1932 Hi-Boy Built By Roy Brizio Street Rods Brookville Deuce Built By SoCal Speed Shop Corky Coker s Honest Charley 32 Roadster Don Youngblood 32 Roadster On The Salt Flats! Scott Whitaker s DynaMat Three Window Coupe Another Amazing Dan Youngblood 32 Three Window Coupe We built this beautiful 32 Three Window For The 2009 NSRA Giveaway Car We Drove Hard Across America Through Rain & Desert To The SEMA Show In Our Three Window Prototype CustomerService@BrookvilleRoadster.com

110 Order Form Bill To: Name: Address: City: State: Address Zip: Phone: ( ) Ship To: Name: Address: City: State: Zip: Phone: ( ) Part Unit Labor Total Number Quantity Description Price Charge Price Deposit For Body, Chassis or Starter Package Method of payment: Check C.O.D. Money Order Charge My: MasterCard Visa Discover Card Number Expiration Date: CVV Code Signature: Subtotal Ohio Customers add 7.5% Sales Tax Shipping Charges TOTAL Notice: All Prices are subject to change without notice. If price changes are extreme, purchaser will be notified before shipping

111 Ordering and Shipping Contacting Us Shop Brookville Roadster any time at To reach us by phone give us a call at (937) Orders may also be mailed to us to the following address. Brookville Roadster, Inc. ATTN: Orders 718 Albert Road Brookville, Ohio us at CustomerService@BrookvilleRoadster.com Fax us at (937) Orders and Shipping Orders will be shipped by the most economical means unless otherwise specified by the purchaser. On larger items where crating is involved, a crating charge will be added to your order. - Bodies, Beds, front fenders, frames, and chassis will be shipped via truck. - Ohio residents add 7.5% sales tax. Claims Claims for damaged, open or concealed cartons, to be made to freight carrier and us within 7 days. Claims for shortage to be made to us within 7 days of receipt of order. Prices All prices are subject to change without notice. If price changes are extreme, purchaser will be notified before shipping. Back Orders Orders or portions of orders for merchandise temporarily out of supply will be held on Back Order and shipped immediately when available. Warranty Any products manufactured or sold by Brookville Roadster, Inc. is guaranteed free from defects in workmanship and material for one (1) year. Brookville Roadster, Inc.'s liability for defects in materials and workmanship is limited to repair or replacement at our option. Brookville Roadster, Inc. makes no warranty expressed or implied to products not manufactured by Brookville Roadster. All advice expressed or implied that its products are merchantable or fit for a particular purpose. Brookville Roadster, Inc. shall not be liable for accidents, property damage, or bodily injury directly or indirectly from any defect in its products or from their use. Payment Please pay by Credit Card, money order, or Certified Check. Personal checks will delay orders 2 weeks because of bank clearance. Print name and address clearly using full street address, post office boxes can not be accepted. Returns All returns or exchanges must include a copy of the invoice or packing slip. Returns or exchanges within 30 days of the ship date are not subject to a restocking fee. Past 30 days but less than 6 months a 20% restocking fee shall apply. After Six months but less than a year a 50% restocking fee shall apply. No returns will be accepted after one year. All shortages must be reported within 7 days of receipt of package. Special Ordered items may not be returned. Any item that has been altered or painted may not be returned. Brookville Roadster has the right to deny any return. Please box items with extreme care to avoid damage during shipping. This is the customers responsiblity. Please ship any returns prepaid to Brookville Roadster ATTN: Returns 718 Albert Road Brookville, OH Please do not ship returns C.O.D as they will be refused. CustomerService@BrookvilleRoadster.com

112 (937) Find Us at the Following Shows The Grand National Roadster Show- Pomona, CA Kyanna Swap Meet- Louisville, KY The Lonestar Roundup- Austin, TX Spring Carlisle- Carlisle, PA NSRA East- York, PA The LA Roadster Show- Pomona, CA Back to the 50 s- St. Paul, MN NSRA Street Rod Nationals- Louisville, KY GoodGuy s Pleasanton- Pleasanton, CA Shades of the Past- Pigeon Forge, TN Fall Carlisle- Carlisle, PA Hershey Swap Meet- Hershey, PA The SEMA Show- Las Vegas, NV Turkey Rod Run- Daytona Beach