Bits and Pieces. Chapter 7. Switching to A. A Gu i d e To...

Size: px
Start display at page:

Download "Bits and Pieces. Chapter 7. Switching to A. A Gu i d e To..."

Transcription

1 A Gu i d e To... Chapter 7 A ny time you build a street rod, there will be a number of changes along the way and a host of last-minute details to attend to. That s what this chapter is all about. Switching to A Power Rack With the car under construction, the decision was made to switch to a power rack from Flaming River. Fortunately it s a simple bolt-in procedure. Flaming River offers power and manual rack-and-pinion units for both front- and rear-steer applications. We used the Mustang II-style with four turns lock-to-lock. 92 CHAPTER 7

2 Building A Ford As we added power steering, a pump was required. It s important that the pump be matched to the requirements of the steering gear. Flaming River also offers a variety of steering columns. If you want to keep things simple, their roadster column is what you re after. If you want more bells and whistles, Flaming River offers tilt, telescoping columns with and without shifters. Along with pumps, Flaming River offers billet pulleys. For those who want power-everything, Flaming River offers a telescoping column that operates electronically. 93

3 A Gu i d e To... LIGHTS FORE AND AFT To lower the lights, J.B. Donaldson channeled the fiberglass buckets. First the mounting surface was cut away. The front of our Ford doesn t lack for illumination. Note that the J.B. Donaldson bullnose lights up. Next the headlight was slipped over the pedestal for a trial fit. With the headlight positioned properly, a new bottom was formed for the light. One of this car s features that makes people look twice are the lowered headlights. On a 36, the headlights mount to pedestals on the fenders. Once the new bottoms were glassed into the buckets, the headlights were installed. 94 CHAPTER 7

4 The lowered lights are so subtle most people can t figure out what happened to the front of the 36 they just like it. Building A Ford Below the headlights are two round grilles that the horns normally fit behind. The plastic light and the rubber grommet are an almostperfect fit for the horn grille. In our case those holes will hide turn signals made from truck clearance lights. The rubber grommet holds them in place. Up front, our lighting consists of lowered stock lights housing halogen bulbs and turn signals behind the horn grilles. 95

5 A Gu i d e To... THE CLASSIC NERF BAr Out back we wanted something clean and simple, like 39 Ford taillights. But we wanted something that could be seen by other motorists. We didn t want to run the stock bumpers on the 36, but we still wanted to offer some protection to both ends of the coupe. What better way to do that than with a classic pair of nerfs? For good-looking lights that could also be seen, we used J.B. Donaldson s interpretation of the venerable teardrop. Up front, the nerf bar is a simple, single loop that fits under the fenders and protects the grille. The mounting pads bolt to the framerails. Installing the nerf bar in the rear was a little more complicated. First two openings were made in the body with a hole saw. Donaldson s lights not only look good, but with a bunch of LEDs, they re bright enough to be seen by those following. 96 CHAPTER 7

6 For some applications the holes could be used to slip the bars through. Building A Ford We mocked up several variations of the rear nerfs. Like the front, it began as a simple loop. However, in our case we chose to make the holes slots. A cutoff wheel made quick work of that task. Back from the chrome shop, the final design included a loop and a mounting point for the license plate. The finished slot. By cutting the body this way, installing the nerf bar, with it s substantial mounting plate, is simplified. Bolted in place, the nerf adds a nostalgic element to the back of the coupe, not to mention some practical protection. 97

7 A Gu i d e To... SHIFTER AND PARKING BRAKE Another safety item is a parking brake. This floor-mount model is from Lokar. Topping off our Flaming River steering column is a beautiful banjo steering wheel by J.B. Donaldson. To select gears we chose a Lokar shifter. Lokar also supplied the parking brake cables. Note the adjustable ends. An often-overlooked item is the neutral switch, shown here on our Lokar shifter. The car should never be able to start in gear; that s a sure invitation to an accident. 98 When using rear disc brakes, a separate parking brake caliper is often required. On the left is SSBC s version. CHAPTER 7

8 INSTALLING A WIPER Building A Ford Most wiper motors mount by the shaft and have a small bracket that attaches to the header to keep the housing from moving in operation. Something that is often forgotten is a windshield wiper. For our 36, we decided on a single wiper in the stock location. For a clean installation, the shafts on most motors can be shortened. It requires the shaft and housing be removed from the motor. The wiper motor, with the shaft shortened, is put in place. A nut and bezel secures it to the body from the outside. The most nerve-racking part of the installation is locating and drilling the hole for the shaft. Not much room for error, and fixing a mistake is serious work. To provide power, a hot wire is run up the windshield post. With the upholstery panel modified and put back in place, the installation is complete. 99

9 A Gu i d e To... FENDER BRACES On a Ford, the fenders are rather large and subject to vibration, so braces are required to prevent cracks from developing. RUNNING BOARDS In some cases stock fender brackets are available. However, we didn t have any, so a set was fabricated from U-shaped steel. To stay consistent with the traditional styling theme of our coupe, we elected to cloak the Donaldson smooth running boards in original rubber covers. Up front, the braces attach to the frame then curve down and attach to the bottom of the fender at the back of the wheel opening. More than adequate built-in reinforcing means the Donaldson running boards can be made functional. The rear braces also run from the frame to the bottom of the fender, behind the wheel opening. However, these braces are shaped differently and positioned so as not to be visible from the rear. When it comes to attaching the running board rubber, much of the integrity will come from the adhesive. Proper preparation of the surface is a must. 100 CHAPTER 7

10 Building A Ford Once the surface of the running board is smooth and flat, the ends can be trimmed with a razor blade. With the cover in place, the outside edge is wrapped around the running board. Lots of spring clamps help with this operation. It seems as though there is more rubber than running board, as this fold shows. To secure the rubber where the board fits under the body, a few pop rivets can be used. The cure is to make a to make a slit in the rubber so it will form itself to the rounded corner of the running board. The finished running board. The rubber covers give the car a much more traditional look that smoothie type. 101

1964 1/2-70 Mustang Torque Arm Rear Suspension Installation Instructions

1964 1/2-70 Mustang Torque Arm Rear Suspension Installation Instructions 1964 1/2-70 Mustang Torque Arm Rear Suspension Installation Instructions 1-800-984-6259 www.totalcostinvolved.com Version 2 (c) 2008 Total Cost Involved Engineering, Inc. All Rights Reserved. Page 1 of

More information

Mount polished. Frame layout

Mount polished. Frame layout November 2014 Brandt made a full mockup of the seat in vinyl to make changes and have patterns for the seats. We did some adjustments the height to lower the seats as much as possible. I was unable to

More information

Build a better Buick. The buick regal was one of the more-popular 1980s body SPECIAL! STOCK CAR. How to detail Tim Richmond s Riverside Regal

Build a better Buick. The buick regal was one of the more-popular 1980s body SPECIAL! STOCK CAR. How to detail Tim Richmond s Riverside Regal Build a better Buick STOCK CAR SPECIAL! How to detail Tim Richmond s Riverside Regal by DREW HIERWARTER Drew s Tim Richmond Buick Regal is a fitting tribute to a great driver and a nice commemoration of

More information

Installation Instructions Supertop for Truck

Installation Instructions Supertop for Truck Installation Instructions Supertop for Truck US Patent 6827391 Vehicle Application: Ford F150 1987-1996 (8 ft.) Part Number: 76315 Ford F250 1987-1998 (8 ft.) Part Number: 76315 Ford F350 1987-1998 (8

More information

Installation Instructions and Suggestions For Jeep YJ Fiberglass Replacement Bodies

Installation Instructions and Suggestions For Jeep YJ Fiberglass Replacement Bodies Installation Instructions and Suggestions For Jeep YJ Fiberglass Replacement Bodies Getting started with the removal of your existing Jeep body. Trust nothing to memory; take photos of everything at different

More information

SHARK UPPER WINDSHIELD FRAME & WINDSHIELD REPLACEMENT. Text and Photos by TOM BENFORD

SHARK UPPER WINDSHIELD FRAME & WINDSHIELD REPLACEMENT. Text and Photos by TOM BENFORD Text and Photos by TOM BENFORD I purchased a fathom green 69 big-block tri-power T-top coupe with only 42,000 original miles on it recently. I'm the third owner of the car, and I got it for a very good

More information

Mounting Body CHAPTER 9

Mounting Body CHAPTER 9 CHAPTER 9 Mounting Body During the build of your car, you will need to trial fit the body numerous times. It is possible to construct a simple moveable rack that can lift the body and then move the body

More information

2510 E Sunset Rd Suite #3 Las Vegas, NV Phone (702) or Fax (702) Mustang Depot all rights reserved

2510 E Sunset Rd Suite #3 Las Vegas, NV Phone (702) or Fax (702) Mustang Depot all rights reserved 1 Thank you for purchasing the Mustang Depot E Body Kit! This new kit has evolved through a careful process of improving fitment and overall quality over the last 8 years. The current manufacturer, FSI

More information

Subaru Front Mount Intercooler Kit STI Subaru Front Mount Intercooler Kit STI

Subaru Front Mount Intercooler Kit STI Subaru Front Mount Intercooler Kit STI Subaru Front Mount Intercooler Kit STI 2008-2014 715500 Subaru Front Mount Intercooler Kit STI 2008-2014 Congratulations on your purchase of the Subaru Front Mount Intercooler Kit STI 2008-2014. The following

More information

Installation Instructions Supertop for Truck

Installation Instructions Supertop for Truck Installation Instructions Supertop for Truck US Patent 6827391 Vehicle Application: Toyota Tacoma Double Cab 2005-2011 (5 ft.) Part Number: 76308 INSTALLATION TIME SKILL LEVEL 1-1/2 Hours 2 - Moderately

More information

Installation Instructions for TJ Jeep s Fiberglass Replacement Bodies and Parts

Installation Instructions for TJ Jeep s Fiberglass Replacement Bodies and Parts Installation Instructions for 1997-2006 TJ Jeep s Fiberglass Replacement Bodies and Parts Getting started: We recommend that you take pictures as you dismantle your Jeep. These pictures will help you when

More information

7333 INSTRUCTIONS FOR MILD STEEL A-ARM AVENGER CHASSIS MUSTANG

7333 INSTRUCTIONS FOR MILD STEEL A-ARM AVENGER CHASSIS MUSTANG #917333 Page 1 of 5 7333 INSTRUCTIONS FOR MILD STEEL A-ARM AVENGER CHASSIS 1994-2004 MUSTANG ITEM QTY PART NO/SIZE TUBE CODE DESCRIPTION 1 1 4080 Main hoop 2 1 pr 4180 Cage side (driver & passenger side)

More information

ROLL BARS ROLL BAR COVERS

ROLL BARS ROLL BAR COVERS EAT UPHOLTERY On early cars the Deluxe seat upholstery was all smooth (interior Code 6A). ome of the very late cars also received this upholstery, believed to be because of a lack of available material.

More information

2016 HONDA 1000 Pioneer PN 3102 Turn signal / horn kit rev nc

2016 HONDA 1000 Pioneer PN 3102 Turn signal / horn kit rev nc 2016 Honda 1000 Pioneer STOP - THIS KIT IS DESIGNED SPECIFICALLY FOR 2016 HONDA 1000 PIONEER IF YOUR MACHINE IS NOT THIS MODEL DO NOT PROCEED. THIS KIT DOES NOT WORK ON THE PIONEER 500 nor 700 S. Contact

More information

2011 Cadillac CTS Coupe EGX Exhaust Tip & Rear Valance Mesh Accent Kit Part #: Complete E

2011 Cadillac CTS Coupe EGX Exhaust Tip & Rear Valance Mesh Accent Kit Part #: Complete E BILLET GRILLS IMPORTANT: PLEASE KEEP THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE! 2011 Cadillac CTS Coupe EGX Exhaust Tip & Rear Valance Mesh Accent Kit Part #: Complete 5122-1900-11E TOOLS REQUIRED Automotive

More information

Outer Door Handles. Side View Mirrors. Oval Mirrors. Late Convertible Mirrors. Polished Stainless Steel Late Model Mirror EXTERIOR ACCESSORIES

Outer Door Handles. Side View Mirrors. Oval Mirrors. Late Convertible Mirrors. Polished Stainless Steel Late Model Mirror EXTERIOR ACCESSORIES Outer Door Handles If you don't want a key for each door, then a pair of new Outer Door Handles is the way to go. Quickly replaces worn and defective parts and is a great answer for missing keys. 3707

More information

7316 INSTRUCTIONS FOR MILD STEEL STRUT AVENGER CHASSIS CHEVY FULL SIZE WITH 3" TOP CHOP

7316 INSTRUCTIONS FOR MILD STEEL STRUT AVENGER CHASSIS CHEVY FULL SIZE WITH 3 TOP CHOP #917316 Page 1 of 5 7316 INSTRUCTIONS FOR MILD STEEL STRUT AVENGER CHASSIS 1955-1957 CHEVY FULL SIZE WITH 3" TOP CHOP ITEM QTY PART NO/SIZE TUBE CODE DESCRIPTION 1 1 4054 Main hoop 2 1 pr 4154 Cage side

More information

Up, Up, and Away. How to easily turn your first-gen Nova into

Up, Up, and Away. How to easily turn your first-gen Nova into Tech Calin Head Robert McGaffin ing hot rods and race cars of all types. How to easily turn your first-gen Nova into Brian says, We are builders and fabricators of custom hot rods, street rods, a gasser

More information

2017 Mini Stock and Small Car Figure Eight Racing Rules Section A Race Procedures

2017 Mini Stock and Small Car Figure Eight Racing Rules Section A Race Procedures 2017 Mini Stock and Small Car Figure Eight Racing Rules Section A Race Procedures 1) Type of Race Races are designed for an economical, fun type of racing series. Most people prefer a figure eight style

More information

POWER RACK AND PINION STEERING INSTALLATION

POWER RACK AND PINION STEERING INSTALLATION by Randy Irwin 1955-57 POWER RACK AND PINION STEERING INSTALLATION Randy Irwin - Technical Writer Randy has been involved in the Chevy parts business for over 25 years. He is a wizard at creating, making

More information

Blowfish Racing, LLC 200 Old Love Point Road Stevensville, MD

Blowfish Racing, LLC 200 Old Love Point Road Stevensville, MD Blowfish Racing, LLC 200 Old Love Point Road Stevensville, MD 21666 steve@blowfishracing.com 410-643-1127 Next Gen Rear Tow Hook Kit, 2005-2014 Mustang - ALL Congratulations on the purchase of your Blowfish

More information

General Front Windshield

General Front Windshield General Front Windshield **WATCH OUR INSTALL VIDEO ALONG WITH INSTALL SHEET. 8-5/16-18x1 Black Carriage Bolts 8-5/16 Black Nylock Nuts 2-5/16x1-1/4 Stainless Steel Socket Head Screws 2-Rubber Grommets

More information

Alaska State Fair Demolition Derby Rules (LARGE CARS)

Alaska State Fair Demolition Derby Rules (LARGE CARS) 2017-18 Alaska State Fair Demolition Derby Rules (LARGE CARS) If car does not pass inspection or driver is unwilling to change car to pass inspection, car will not run in derby - absolutely no refunds!!

More information

A A A

A A A ADJUSTABLE RIDER BACKREST Requires Long haul Touring Seat Dual A9700209 or Solo Bucket Seat A9708162 for fitment 0.3 A9708158 LONGHAUL TOURING SEAT DUAL Can be installed with Adjustable Rider Backrest,

More information

Right On Replicas, LLC Step-by-Step Review * 1970 Plymouth HEMI Cuda 1:25 Scale Revell Model Kit # Review

Right On Replicas, LLC Step-by-Step Review * 1970 Plymouth HEMI Cuda 1:25 Scale Revell Model Kit # Review Right On Replicas, LLC Step-by-Step Review 20140923* 1970 Plymouth HEMI Cuda 1:25 Scale Revell Model Kit #85-4268 Review Review and Photos by Will Emerson In 1964 Plymouth developed the Barracuda from

More information

Mustang CDC Lightbar (94-04) - Installation Instructions

Mustang CDC Lightbar (94-04) - Installation Instructions Mustang CDC Lightbar (94-04) - Installation Instructions The below installation instructions work for the following products: Classic Design Concepts Mustang Convertible Lightbar (94-04 Carbon Fiber) Classic

More information

Illuminated Cup Holders Hyundai Elantra (GLS, Limited, Coupe)

Illuminated Cup Holders Hyundai Elantra (GLS, Limited, Coupe) Illuminated Cup Holders 2011-2015 Hyundai Elantra (GLS, Limited, Coupe) Thanks for purchasing this Cup Holder Illumination Install Kit! If you have any questions or feedback please email me direct at info@accentglowled.com

More information

7311 INSTRUCTIONS FOR 4130 STRUT AVENGER CHASSIS CAMARO/FIREBIRD

7311 INSTRUCTIONS FOR 4130 STRUT AVENGER CHASSIS CAMARO/FIREBIRD #917311 Page 1 of 5 7311 INSTRUCTIONS FOR 4130 STRUT AVENGER CHASSIS 1993-1995 CAMARO/FIREBIRD ITEM QTY PART NO/SIZE TUBE CODE DESCRIPTION 1 1 4382 Main hoop 2 1 pr 4383 Cage side (driver & passenger side)

More information

2006 CHEVROLET IMPALA LTZ

2006 CHEVROLET IMPALA LTZ 2006 CHEVROLET IMPALA LTZ The 2006 Impala has gone through big changes at virtually all levels. The platform has been reinforced to increase total vehicle rigidity. In addition to producing two new V6s,

More information

Body Preparation. Stretching the Frame. Stretch Kit CHAPTER 4

Body Preparation. Stretching the Frame. Stretch Kit CHAPTER 4 CHAPTER 4 Body Preparation This step will require cutting the back half of the Fiero from the front half. You will also remove a portion of the front fenders and bumpers. You will need to relocate the

More information

Grill Hardware Kits. Hood Emblem Decals/ Top Grill Bar Letters ea GRILL ASSEMBLY KIT

Grill Hardware Kits. Hood Emblem Decals/ Top Grill Bar Letters ea GRILL ASSEMBLY KIT Grill Hardware Kits 1949-50 GRILL Rivets are replaced with stainless steel nuts and bolts. ORDER #5901 18 00 1951-52 GRILL Rivets are replaced with steel nuts and bolts. ORDER #5903 18 00 1949-50 GRILL

More information

CLASSIC UPDATE WIRING KIT

CLASSIC UPDATE WIRING KIT by Randy Irwin 1955-57 CLASSIC UPDATE WIRING KIT Randy Irwin - Technical Writer Randy has been involved in the Chevy parts business for over 25 years. He is a wizard at creating, making and modifying custom

More information

PARTS LIST TORQUE SPECIFICATIONS

PARTS LIST TORQUE SPECIFICATIONS INSTALLATION INSTRUCTIONS Trans4mer Mounting System Toyota Tacoma Kit No. 32522(black) or 32523(chrome) PARTS LIST PART NO. QUANTITY DESCRIPTION 32503 1 FRAME EXTENSION, R.H. 32504 1 FRAME EXTENSION, L.H.

More information

R O A D M A S T E R, I N C.

R O A D M A S T E R, I N C. R O A D M A S T E R, I N C. BASEPLATE KIT 6 5 14 18 9 20 8 7 19 15 17 16 ITEM QTY NAME MATERIAL 1...2...3 HOLE BACKING PLATE... A-003864 2...4...1/4 x 1 1/2 x 2 SQ. HOLE BACKING PLATE... A-000039 3...4...1/2

More information

Please read BOTH these Installation Instructions and the General Information sheet prior to installing or operating this equipment.

Please read BOTH these Installation Instructions and the General Information sheet prior to installing or operating this equipment. 2011-13 Mini Cooper Hardtop (Includes S) 2012-15 Mini Cooper Coupe (Includes S) 2009-15 Mini Cooper Convertible (Includes S) 2012-15 Mini Cooper Roadster (Includes S) 2008-14 Mini Cooper Clubman (Includes

More information

Auto Restying Convertible, Cabriolet, Roadster, Phaeton & Station Wagon Windshield and Top Top Dowels

Auto Restying Convertible, Cabriolet, Roadster, Phaeton & Station Wagon Windshield and Top Top Dowels Windshield to Body Covertibles & Station Wagon Glass to Body Rubber 78-761290 70.00 pr Opening Stainless Trim Kit 78-741234-S 475.00 ea Windshield Garnish Moldings fiberglass Convertible & Wagon (39-40

More information

7211 A-ARM FRONT, 4-LINK, 3 X 2 FRAME, INTERMEDIATE, ELIMINATOR CHASSIS ITEM QTY SIZE/PART NO. TUBE CODE DESCRIPTION

7211 A-ARM FRONT, 4-LINK, 3 X 2 FRAME, INTERMEDIATE, ELIMINATOR CHASSIS ITEM QTY SIZE/PART NO. TUBE CODE DESCRIPTION #917211 Page 1 of 6 7211 A-ARM FRONT, 4-LINK, 3 X 2 FRAME, INTERMEDIATE, ELIMINATOR CHASSIS ITEM QTY SIZE/PART NO. TUBE CODE DESCRIPTION 1 2 4138 Cage Side 2 2 4208 Forward strut 3 1 4038 Main Hoop 4 1

More information

Ford Passenger Cars Mustang II Independent Front Suspension Installation Instructions

Ford Passenger Cars Mustang II Independent Front Suspension Installation Instructions 1935-1948 Ford Passenger Cars Mustang II Independent Front Suspension Installation Instructions 1-866-925-1101 www.totalcostinvolved.com The installation of the Total Cost Involved's Mustang Independent

More information

INSTRUCTIONS FOR MILD STEEL STRUT AVENGER CHASSIS 1937 CHEVY, SCALED DOWN BODY

INSTRUCTIONS FOR MILD STEEL STRUT AVENGER CHASSIS 1937 CHEVY, SCALED DOWN BODY #917325 Page 1 of 5 7325 INSTRUCTIONS FOR MILD STEEL STRUT AVENGER CHASSIS 1937 CHEVY, SCALED DOWN BODY Item Qty Part No/Tube Size Tube Code Description 1 1 4069 Main hoop 2 1 pr 4169 Cage side (driver&passenger

More information

57 FIN MOLDING FIN MOLDING PIN SETS. NOMAD Only MOLDING CLIPS

57 FIN MOLDING FIN MOLDING PIN SETS. NOMAD Only MOLDING CLIPS PHONE: 215-348-5568 / FAX: 215-348-0560 115 57 FIN MOLDING 20-007 Fin CORNER MOLDING CLIPS, 57, Pr. 10.50 R Fin Molding Clips These have an Orange enamel finish These are the only ones made in the USA

More information

TruckSkin F.A.Q.s and Tips

TruckSkin F.A.Q.s and Tips 1 TruckSkin F.A.Q.s and Tips Here are some helpful answers and tips for your self installation. You can see more installation information on our website TruckSkin.com Please contact us with any questions.

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Trans4mer Mounting System Part No. 30090 (black) Part No. 30091 (chrome) for Chev & GMC S-series trucks NOTE: GMC SLE only: This model has a plastic bumper cover which protrudes

More information

7256 INSTRUCTIONS FOR ELIMINATOR II A-ARM FRONT, 4-LINK REAR, MILD STEEL, INTERMEDIATE, SERIES CHASSIS

7256 INSTRUCTIONS FOR ELIMINATOR II A-ARM FRONT, 4-LINK REAR, MILD STEEL, INTERMEDIATE, SERIES CHASSIS #917256 Page 1 of 7 7256 INSTRUCTIONS FOR ELIMINATOR II A-ARM FRONT, 4-LINK REAR, MILD STEEL, INTERMEDIATE, SERIES CHASSIS ITEM QTY SIZE/PART NO. TUBE CODE DESCRIPTION 1 2 4138 Cage Side 2 2 4208 Forward

More information

TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS GENERAL PURPOSE: The purpose of these specifications is to describe for purchase, a 2018 or newer 10-14 passenger airport shuttle bus with rear mounted handicap lift. This bus

More information

RoR Step-by-Step Review * 1977 Jeep CJ-7 Renegade 1-24 Revell Kit Review

RoR Step-by-Step Review * 1977 Jeep CJ-7 Renegade 1-24 Revell Kit Review RoR Step-by-Step Review 20130120* 1977 Jeep CJ-7 Renegade 1-24 Revell 85-2180 Kit Review Being a Jeep owner, you tend to get a little fanatical about them. I ve been an avid off-roader for about 15 years;

More information

Detroit Speed, Inc. Selecta-Speed Wiper Kit Corvette P/N:

Detroit Speed, Inc. Selecta-Speed Wiper Kit Corvette P/N: Detroit Speed, Inc. Selecta-Speed Wiper Kit 1968-72 Corvette P/N: 121621 A downpour of rain will no longer hinder your ability to clearly see the road. The Detroit Speed Selecta-Speed Wiper Kit provides

More information

King of the Ring Rules 2019

King of the Ring Rules 2019 King of the Ring Rules 2019 Show Format: 55 Car Maximum Entry Heat 1: 55 Cars will run down to top 25 (Mad Dog will advance to Main Feature automatically.) Consolation Cars will be guaranteed 30 minutes

More information

BEATING THE OOOS DR. DON CAMPBELL'S '68 MUSTANG FASTBACK COMING TOGETHER

BEATING THE OOOS DR. DON CAMPBELL'S '68 MUSTANG FASTBACK COMING TOGETHER BEATING THE OOOS DR. DON CAMPBELL'S '68 MUSTANG FASTBACK Making matters worse was the taillight panel. "Like the floors, this had been botched as well, with a new skin placed over the original," Allan

More information

Converting an A to 12v and Adding Turn Signals Bill Lee

Converting an A to 12v and Adding Turn Signals Bill Lee Converting an A to 12v and Adding Turn Signals Bill Lee Bill@WRLee.com When I bought my 1929 Tudor, it had been restored about 20 years earlier. It had halogens and had been converted to 12v negative ground,

More information

t H U N d e r b i r d A c c e S S O r i e S

t H U N d e r b i r d A c c e S S O r i e S t H U N d e r b i r d the thunderbird is the ideal starting point for creating a personalized custom cruiser. With two distinct accessory themes, and numerous options in between, the triumph Accessory

More information

1501 Industrial Way N., Toms River, NJ Fax: PACKING LIST MUSTANG LONG TUBE HEADERS (M30000)

1501 Industrial Way N., Toms River, NJ Fax: PACKING LIST MUSTANG LONG TUBE HEADERS (M30000) 2/18/04 1501 Industrial Way N., Toms River, NJ 08755 732-349-2109 Fax:732-244-0867 ADVANCED - Installation requires professional-type tools and advanced automotive-service skills. If you lack experience

More information

B&W Turnover Ball Installation

B&W Turnover Ball Installation B&W Turnover Ball Installation by Flopster843 02 Jan 2012 I wanted to start this article out by stating one very important thing. Installing a gooseneck hitch is not a task to be taken lightly. If you

More information

Harley Davidson Ultra Fairing Install on a 2003 RoadStar by Bennie Scarbrough (Basshawk84)

Harley Davidson Ultra Fairing Install on a 2003 RoadStar by Bennie Scarbrough (Basshawk84) Harley Davidson Ultra Fairing Install on a 2003 RoadStar by Bennie Scarbrough (Basshawk84) There is probably a dozen different ways to go about mounting this fairing on the bike. This is just the way that

More information

2007 CHEVROLET SILVERADO 1500 LT 4X4 2007

2007 CHEVROLET SILVERADO 1500 LT 4X4 2007 2007 CHEVROLET SILVERADO 1500 LT 4X4 2007 The new-generation Silverado is built on a new frame with 234% more torsional rigidity. This year s line-up features four engines: a 4.3-litre V6, a 4.8-litre

More information

by Pony # all MUSTANG hardware from Pony Enterprises, Inc.

by Pony # all MUSTANG hardware from Pony Enterprises, Inc. 052 04522 65-66 screw, dash and pillar trim (8) $2.00 101 8260 65-70 kit, band hose clamps, 170 & 200 6 cyl (10) $36.00 102 8260 65-73 kit, band hose clamps, small block V-8 & 69-73 250 6 cyl (10) $36.00

More information

was the first to manufacture LED conversion kits to convert most taillights the first to incorporate cards.

was the first to manufacture LED conversion kits to convert most taillights the first to incorporate cards. LED Taillight Conversion Units Awarded Best New Safety Related Street Rod Product for 1996 at the National Street Rod Association s nationals in Columbus, Ohio Lambert was the first to manufacture LED

More information

Installation Instructions. QuickSilver Shifter. Fits: GM, Ford, Chrysler Transmissions See Application Guide for Specific Applications Part # 80683

Installation Instructions. QuickSilver Shifter. Fits: GM, Ford, Chrysler Transmissions See Application Guide for Specific Applications Part # 80683 Installation Instructions QuickSilver Shifter Fits: GM, Ford, Chrysler Transmissions See Application Guide for Specific Applications Part # 80683 WORK SAFELY! For maximum safety, perform this installation

More information

GENERAL BUILD RULES FUEL SYSTEMS

GENERAL BUILD RULES FUEL SYSTEMS GENERAL BUILD RULES 1. All vehicles must tech to the 2018 Rules Previously run cars included. Note: OEM means original equipment of the manufacturer. 2. The Derby is open to any American made hardtop model

More information

850 M-Technic Body Parts (CSi)

850 M-Technic Body Parts (CSi) 850 M-Technic Body Parts (CSi) Part Description BMW Part No. Qty List Price Front Spoiler 51-11-2-253-000 1 $ Rear Valance 51-12-2-253-005 1 $ Installation Kit 82 11 9 402 709 1 $ Flap Cover for Rear

More information

Assembly Manual for Chevy SSK $32.00 Assembly Manual for Ford SSK $32.00 Assembly Manual for VW SSK $32.00

Assembly Manual for Chevy SSK $32.00 Assembly Manual for Ford SSK $32.00 Assembly Manual for VW SSK $32.00 29 SSK PARTS AND ACCESSORIES PRICE LIST May-2011 1 of 7 ITEM DESCRIPTION: PRICE Key Ring, CMC Logo $13.85 Assembly Manual for Chevy SSK $32.00 Assembly Manual for Ford SSK $32.00 Assembly Manual for VW

More information

Installation Instructions Supertop for Truck

Installation Instructions Supertop for Truck Installation Instructions Supertop for Truck Vehicle Application: Ford F-150 5.5 Ft. Styleside 2004 and newer Part Number: 76309 www.bestop.com - We re here to help! Visit our web site and click on Ask

More information

JBrake.com Made in the U.S.A. Forums.SuperTrapp.com P:

JBrake.com Made in the U.S.A. Forums.SuperTrapp.com P: Master Index 3 FORWARD CONTROLS & PEGS: J-FL Forward Controls 131 Classic Solid Forward Controls 132-133 Radial Slotted Forward Controls 134-135 J-FX Forward Controls 136-137 Pegs 138-139 HAND CONTROLS

More information

Please read BOTH these Installation Instructions and the General Instructions prior to installing or operating this equipment.

Please read BOTH these Installation Instructions and the General Instructions prior to installing or operating this equipment. 2011-13 Mini Cooper Hardtop (Includes S) 2012-14 Mini Cooper Coupe (Includes S) 2009-15 Mini Cooper Convertible (Includes S) 2012-14 Mini Cooper Roadster (Includes S) 2008-14 Mini Cooper Clubman (Includes

More information

Must have a shut off mechanism easily accessible in case of emergencies,

Must have a shut off mechanism easily accessible in case of emergencies, 2017 Open Wire / Beginner Wire Demolition Derby Rules Any full size sedan,or station wagon may be used in the competition of this class, { No full frame or sub frame imperial up to 1973 are not allowed

More information

Front plate before plating and painting. Shifter plate with hole for exhaust cutout lever

Front plate before plating and painting. Shifter plate with hole for exhaust cutout lever Jan 3: I had to make a mounting plate for the choke cable, which goes under the dash. Worked on the wires to route them to the gauges, it had been a challenge to determine where everything goes. Cleaned

More information

IMPORTANT: PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE

IMPORTANT: PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE IMPORTANT: PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE 2009 Toyota RAV-4 Stainless Steel Mesh Grilles L 30 G8P Fine Mesh Part #30-002-09 Quantity Description Part No. Upper Mesh Grille (includes):

More information

Mustang Radiator Conversion DIY. By GearHeadPeter. January 27, 2011

Mustang Radiator Conversion DIY. By GearHeadPeter. January 27, 2011 1964-1966 Mustang Radiator Conversion DIY By GearHeadPeter January 27, 2011 We all know that the radiators in our cars are not the best, especially if you have done any customization to the engine, which

More information

What do I need to do when my parts are delivered via Truck Freight Delivery? When the shipment arrives, verify you have received all your items.

What do I need to do when my parts are delivered via Truck Freight Delivery? When the shipment arrives, verify you have received all your items. GENERAL QUESTIONS Do your products come with a warranty? (Disclaimer: All claims are handled on a case by case basis) All products come with a limited manufacturer's warranty. The warranty covers shipping

More information

INSTALLATION GUIDE Canted Billet 4-Bar, 4x2 Rear Frame

INSTALLATION GUIDE Canted Billet 4-Bar, 4x2 Rear Frame INSTALLATION GUIDE 7154 Canted Billet 4-Bar, 4x2 Rear Frame Description: Non-application specific, weld-in, 4 x 2 rear frame for use with Chassisworks 6241 billet aluminum suspension links. IMPORTANT:

More information

WIDE RIDE IFS (STOP --- READ ALL THE DIRECTIONS FIRST!)

WIDE RIDE IFS (STOP --- READ ALL THE DIRECTIONS FIRST!) WIDE RIDE IFS We are happy to inform you that you have purchased the best I.F.S. kit on the market for you truck. The NO LIMIT WIDE-RIDE I.F.S. is our own design, based on years of truck building experience.

More information

2007 GMC ACADIA SLE. Interior and cargo area

2007 GMC ACADIA SLE. Interior and cargo area 2007 GMC ACADIA SLE The Acadia is a crossover vehicle that shares its platform with the Buick Enclave and Saturn Outlook. This new GMC is as long and large as the imposing Yukon but longer by 8 cm in the

More information

September, 2012 Special Issue 1912 Ford Model T Speedster Lee Thevenet Text and Photo Layout

September, 2012 Special Issue 1912 Ford Model T Speedster Lee Thevenet Text and Photo Layout September, 2012 Special Issue 1912 Ford Model T Speedster By Lee Thevenet Text and Photo Layout 1 September 20, 2012 Hi Builders, This speedster build began to take shape in March 2007 with the building

More information

March Lancia Fulvia Coupe Series Parts

March Lancia Fulvia Coupe Series Parts March 2019 Lancia 3 Series Parts Table of Contents Lancia-> 3 Series->Body Panels Lancia-> 3 Series->Brakes Lancia-> 3 Series->Bumpers Lancia-> 3 Series->Doors Lancia-> 3 Series->Electrical and Ignition

More information

60-65 Falcon, Comet & Ranchero Coil Spring IFS

60-65 Falcon, Comet & Ranchero Coil Spring IFS 60-65 Falcon, 62-65 Comet & 62-65 Ranchero Coil Spring IFS All engine installations with this front end will require a rear sump oil pan. 289-302 Small Block Ford Motors Milodon rear sump pan holds 7 quarts

More information

INSTALLING A 1977 THRU 1982 C3 STEERING COLUMN INTO A EARLIER 1969 THRU 1976 MODEL CORVETTE

INSTALLING A 1977 THRU 1982 C3 STEERING COLUMN INTO A EARLIER 1969 THRU 1976 MODEL CORVETTE Last Revised: 23FE2011 INSTALLING A 1977 THRU 1982 C3 STEERING COLUMN INTO A EARLIER 1969 THRU 1976 MODEL CORVETTE Why Make This Installation Starting in 1977 and carrying thru 1982, the C3 Corvette steering

More information

Please read BOTH these Installation Instructions and the General Towing Instructions before attempting to install or operate this equipment.

Please read BOTH these Installation Instructions and the General Towing Instructions before attempting to install or operate this equipment. Please read BOTH these and the General Towing Instructions before attempting to install or operate this equipment. 1. Blue Ox towing products and accessories are intended to be installed by Blue Ox Dealers

More information

November Lancia Fulvia Coupe Series Parts

November Lancia Fulvia Coupe Series Parts November 2018 Lancia 1 2 3 Series Parts Table of Contents Lancia-> 1 2 3 Series->Accessories Lancia-> 1 2 3 Series->Body Panels Lancia-> 1 2 3 Series->Brakes Lancia-> 1 2 3 Series->Bumpers Lancia-> 1 2

More information

A C C E S S O R I E S

A C C E S S O R I E S ACCESSORIES 2008 TRIUMPH 2008 MODEL YEAR ACCESSORIES Go your own way The Accessories Story 2-3 Cruisers 4-35 Rocket III Touring 5-16 Rocket III Classic & Rocket III 17-26 America & Speedmaster 27-35 Modern

More information

Mercedes E63/CLS AMG Carbon Turbo Intake System Instructions

Mercedes E63/CLS AMG Carbon Turbo Intake System Instructions Mercedes E63/CLS AMG Carbon Turbo Intake System Instructions The goal of Alpha Performance is to provide the highest quality, best performing products available. By utilizing research and development,

More information

Index. Page Number Section

Index. Page Number Section S H O C K S Index Page Number Section 1-4 GM Front Coil Over Installation 5-7 Front Smooth Body Shock Installation 7-8 Rear Smooth Body Shock Installation 8-11 Custom Coil Over Installation 12 Tuning and

More information

VEHICLE PREPARATION FRAME, BODY AND BUMPERS

VEHICLE PREPARATION FRAME, BODY AND BUMPERS 2018 HOLLYWOOD MOTORSPORTS DEMOLITION DERBY ENTERTAINMENT, LLC PRO FULL-SIZE 2018 Pro Full-Size rules for county fair and Crashing for a Cause only. Attention check website schedule to determine if this

More information

Found in this Section: LIGHTING 64 HANDLEBAR CONTROLS 65 FOOT CONTROLS 66 COVERS, TRIMS & ACCENTS 68 PERFORMANCE 70 KAWASAKI. for

Found in this Section: LIGHTING 64 HANDLEBAR CONTROLS 65 FOOT CONTROLS 66 COVERS, TRIMS & ACCENTS 68 PERFORMANCE 70 KAWASAKI. for Found in this Section: LIGHTING 64 HANDLEBAR CONTROLS 65 FOOT CONTROLS 66 COVERS, TRIMS & ACCENTS 68 PERFORMANCE 70 find more accessories for your kawasaki in multi-fit 89 61 KAWASAKI for drink holders

More information

7260 INSTRUCTIONS FOR ELIMINATOR II STRUT FRONT, 4-LINK REAR, MILD STEEL, FULL SIZE, SERIES CHASSIS

7260 INSTRUCTIONS FOR ELIMINATOR II STRUT FRONT, 4-LINK REAR, MILD STEEL, FULL SIZE, SERIES CHASSIS #917260 Page 1 of 6 7260 INSTRUCTIONS FOR ELIMINATOR II STRUT FRONT, 4-LINK REAR, MILD STEEL, FULL SIZE, SERIES CHASSIS ITEM QTY SIZE/PART NO. TUBE CODE DESCRIPTION 1 2 4139 Cage Side 2 2 4250 Forward

More information

Pre-Purchase Inspection Report

Pre-Purchase Inspection Report Inspecting Shop Name Address Phone Shop Foreman Mechanic Year Make Model Vin Color Miles Engine ECM Horsepower Torque Transmission Engine Brake 3 stage Rear Ends Model Ratio Differential Lock Steering

More information

Wiring Harness 1. Remove left hand footwell trim panel from driver s footwell. Typically secured by several Philips head screws.

Wiring Harness 1. Remove left hand footwell trim panel from driver s footwell. Typically secured by several Philips head screws. Installation There are four segments to the installation; wiring harness, EDIS and Megajolt, coil pack, and Timing wheel and VR sensor. If the car needs to be driven, install everything except the coil

More information

SAFETY SENSORS FIELD OF VIEW WILL BE ALTERED WITH USE OF THE REPLACEMENT BUMPER. Injury hazard

SAFETY SENSORS FIELD OF VIEW WILL BE ALTERED WITH USE OF THE REPLACEMENT BUMPER. Injury hazard SAFETY Your safety and the safety of others is very important. In order to help you make informed decisions about safety, we have provided installation instructions and other information. These instructions

More information

STEERING COLUMN FOR CARS WITH 605, 670(500) OR DELPHI(600) POWER STEERING

STEERING COLUMN FOR CARS WITH 605, 670(500) OR DELPHI(600) POWER STEERING by Randy Irwin 1955-57 STEERING COLUMN FOR CARS WITH 605, 670(500) OR DELPHI(600) POWER STEERING Tools Needed: Philips Screwdriver 7/16 Wrench 1/2 Deep Socket And Ratchet Randy Irwin - Technical Writer

More information

IRON BULL'S BASE BUMPER Our base bumper, standard features include, four five inch Round light hole buckets or two five inch Round light hole buckets

IRON BULL'S BASE BUMPER Our base bumper, standard features include, four five inch Round light hole buckets or two five inch Round light hole buckets IRON BULL'S BASE BUMPER Our base bumper, standard features include, four five inch Round light hole buckets or two five inch Round light hole buckets (depending on your model), a winch plate to mount any

More information

Always obey local vehicle lighting laws. The driver is always responsible for the correct headlight settings.

Always obey local vehicle lighting laws. The driver is always responsible for the correct headlight settings. Lights Introduction In this section you ll find information about: Indicator lights Turn signal lever and high beam switch Switching lights on and off Lights and vision features Lights and vision features

More information

Powder Coating Price List

Powder Coating Price List Powder Coating Price List Top Sellers Wheels: Automotive Wheels up to 13 (each) 70 and up Automotive Wheels 14 19 (each) 80 and up Automotive Wheels 20 24 (each) 100 and up Automotive Wheel Centers (each)

More information

Installation instructions for Camaro/Firebird and Nova* Windshield Wiper Systems

Installation instructions for Camaro/Firebird and Nova* Windshield Wiper Systems Installation instructions for 1967-69 Camaro/Firebird and 1968-74 Nova* Windshield Wiper Systems The Raingear 1967-69 Camaro/Firebird and 1964-74 Nova wiper system is designed for ease of installation

More information

Capital City Nissan 1980 SW TOPEKA BLVD. TOPEKA, KS (785) Model

Capital City Nissan 1980 SW TOPEKA BLVD. TOPEKA, KS (785) Model Capital City Nissan 1980 SW TOPEKA BLVD. TOPEKA, KS 66612 (785) 267-6700 MASTEROMIXES@GMAIL.COM Chris Howard Service Consultant R. Turvey Certified Technician Y O U R V E H I C L E Year 2013 Make Nissan

More information

B5 A4 1.8t Front Mount Intercooler Install Instructions

B5 A4 1.8t Front Mount Intercooler Install Instructions B5 A4 1.8t Front Mount Intercooler Install Instructions Only work underneath your vehicle after properly supporting it with adequate jack stands on a flat surface. NEVER work under a vehicle only supported

More information

MUSTANG PROJECT INSTALLING THE MUSTANG PROJECT SHELBY SEQUENTIAL CONVERSION KIT ON YOUR MUSTANG

MUSTANG PROJECT INSTALLING THE MUSTANG PROJECT SHELBY SEQUENTIAL CONVERSION KIT ON YOUR MUSTANG VOLUME 6 Price:$9.95 MUSTANG PROJECT A SafeCode Inc. Publication INSTALLING THE MUSTANG PROJECT SHELBY SEQUENTIAL CONVERSION KIT ON YOUR 64.5-66 MUSTANG Convert from original 1964.5-66 Mustang style taillights

More information

Wolverine Turn Signal / Horn Kit 2102

Wolverine Turn Signal / Horn Kit 2102 All years Yamaha Wolverine STOP - THIS KIT IS DESIGNED SPECIFICALLY FOR ALL YEAR AND MODELS YAMAHA WOLVERINE. IF YOUR MACHINE IS NOT ONE OF THESE MODELS DO NOT PROCEED. Contact Ryco Motorsports or your

More information

NEW FIGO

NEW FIGO www.ford.co.za NEW FIGO An awesome drive to freedom Discover a car that offers you all the style, technology and freedom that comes with owning your very own vehicle. Substantial package The breathtaking

More information

SAFETY THIS PRODUCT IS FOR OFFROAD USE ONLY. ALL LIABILITY FOR INSTALLATION AND USE RESTS WITH THE OWNER.

SAFETY THIS PRODUCT IS FOR OFFROAD USE ONLY. ALL LIABILITY FOR INSTALLATION AND USE RESTS WITH THE OWNER. SAFETY Your safety and the safety of others is very important. In order to help you make informed decisions about safety, we have provided installation instructions and other information. These instructions

More information

GT Mustang Shaker

GT Mustang Shaker CD4II3CU CDC Mustang 5.0 Shaker 2011-2014 2011-2014 5.0 GT Mustang Shaker Part #1111-7000-01 Component Check List: Shaker Assembly: Part # 1 - Aluminum Shaker Scoop 183020 1 Upper Air Box 1111-3301-01

More information

INSTALLATION GUIDE PREMIUM FRONT BUMPER FOR RAM AEV30304AA Last Updated: 09/18/17

INSTALLATION GUIDE PREMIUM FRONT BUMPER FOR RAM AEV30304AA Last Updated: 09/18/17 AEV30304AA Last Updated: 09/18/17 PREMIUM FRONT BUMPER FOR RAM 1500 INSTALLATION GUIDE PLEASE READ BEFORE YOU START To guarantee a quality installation, we recommend reading these instructions thoroughly

More information

2018 Lake County Fair Derby Chain N Bang Rules

2018 Lake County Fair Derby Chain N Bang Rules 2018 Lake County Fair Derby Chain N Bang Rules The derby is open to any American made hard top model stock car or station wagon. No commercial vehicles, convertibles, pick-ups, SUVs, four wheel drive,

More information