CLOISONNÉ CALENDAR. A Packard Clipper is Reborn

Size: px

Start display at page:

Download "CLOISONNÉ CALENDAR. A Packard Clipper is Reborn"

Margery Stevenson
5 years ago
Views:

CLOISONNÉ CALENDAR Volume 61 No. 19 Spring 2018 A Packard Clipper is Reborn Our Member, Doug Cameron, restored his Packard with help from his cousin. It was a challenging project to say the least.

Our Packard journey started in March 1995, when I was talking with my cousin, Marlin Zimmerman in Phoenix, AZ.

The car was originally delivered in April, 1955 to someone in Tucson. We do not have any prior details about the car. Marlin registered the car along with his daughter in AZ.

, a spinoff from 3M Company in Oakdale, MN. Restoration started immediately with disassembly, bodywork, painting, engine rebuild, chrome plating and body reassembly.

1 CLOISONNÉ CALENDAR Volume 61 No. 19 Spring 2018 A Packard Clipper is Reborn Our Member, Doug Cameron, restored his Packard with help from his cousin. It was a challenging project to say the least. Here is his story. If you have a story on the history or restoration of your car, I d love to share it with our readers so please let me know. Thanks. Our Packard journey started in March 1995, when I was talking with my cousin, Marlin Zimmerman in Phoenix, AZ. He was actively restoring a 1956 Clipper Constellation and had recently found a 1955 Clipper Panama in a junkyard in Tucson, AZ. He purchased it. The odometer showed 98,012 miles. The car was originally delivered in April, 1955 to someone in Tucson. We do not have any prior details about the car. Marlin registered the car along with his daughter in AZ. My wife Judy and I purchased the car from Marlin with the understanding he would follow the restoration in Phoenix since we lived in Stillwater, MN. I worked full-time at Imation Corp., a spinoff from 3M Company in Oakdale, MN. Restoration started immediately with disassembly, bodywork, painting, engine rebuild, chrome plating and body reassembly. All rubber parts were replaced including windshield and back window mountings, vent windows and door weather-strips, grommets, etc. The 320 cid, 225 hp, V8 engine was torn down completely and rebuilt. The transmission seals were all replaced, Carter 4 barrel carburetor rebuilt, water pump exchanged for rebuilt unit, radiator recored, power steering pump rebuilt and brakes repaired, front coil springs replaced and front end rebuilt. Starter switch, plugs and wires replaced, and complete electrical tune-up done. New tires with stems were spin balanced. (continued on page 2)

(A Packard Clipper is Reborn) (continued from page 1) The painting was done in the original two-tone with Ultramarine Metallic on top and bottom and Moonstone as the middle color.

The car was started and idled well. The remaining 12 volt positive ground electrical wiring had not been reconnected and not checked out.

We registered our Panama in MN and purchased antique 1955 MN license plates, plate no. HK-2400.

The car sat in our garage in Stillwater until we retired and built our retirement lake home in Trego, WI. We had a shell home built and closed on it in November, 1998.

2 (A Packard Clipper is Reborn) (continued from page 1) The painting was done in the original two-tone with Ultramarine Metallic on top and bottom and Moonstone as the middle color. The dash and interior metal trim were painted in Sapphire Metallic. The interior and trunk trim were all replaced with reproduction pattern and color. It was now June, The car was started and idled well. The remaining 12 volt positive ground electrical wiring had not been reconnected and not checked out. At this point, we decided to have the car transported to Stillwater, MN in July, 1996 and I would finish the restoration myself, in my spare time. We registered our Panama in MN and purchased antique 1955 MN license plates, plate no. HK I drove the Panama around the neighborhood a few times but had it stall from gas line air lock, I think, and had to walk about a mile home. Not fun. Well, you guessed it! The car sat in our garage in Stillwater until we retired and built our retirement lake home in Trego, WI. We had a shell home built and closed on it in November, During the next two years, we worked on the home weekends doing all the electrical, plumbing and sewer system and installing insulation. We retired at the end of 2000 and switched to working on the new home during the week, returning to Stillwater for the weekends. We hired most of the interior knotty pine installation and sheetrock work so we could move in July, We also had the 4 car garage built earlier that summer so it was also ready for us. For the next 10 years, we enjoyed 7 months at our lake home in beautiful WI and 5 months at our home in sunny AZ. We were too busy playing golf, finishing details of the new house and garage, etc. to have time for the Panama. Finally in Sept. 2013, I started again to work on the Panama myself. Because it had been stored for over 17 years, much of the previous restoration had to be redone. First, I pulled the radiator and flushed it. Then I removed the water pump and cleaned it up so it functioned. I replaced the battery and had the gas tank reconditioned. The gas line had some pin holes so I installed a rubber gas line and electric fuel pump. Time to head south. 2 (continued on page 3)

(A Packard Clipper is Reborn) (continued from page 2) July 2014, I started again only to find the spout leading to the gas tank had a small crack and leaked slightly so I pulled the tank again.

The next step was to do complete engine tune-up, namely plugs, points, condenser, plug wires and voltage regulator.

Not all was good, however, as I had noticed the end of the muffler had rusted thru leaking exhaust fumes into the garage. Kanter Auto Products to the rescue, October, 2015!

I started April, 2016 to work on the braking system. I replaced all four wheel cylinders and rebuilt the vacuum assist master cylinder. What an interesting new experience.

3 (A Packard Clipper is Reborn) (continued from page 2) July 2014, I started again only to find the spout leading to the gas tank had a small crack and leaked slightly so I pulled the tank again. The shop where I had it reconditioned repaired it free of charge so I was ready to go again. I pulled the Carter 4 barrel carburetor and rebuilt it after much procrastination. The next step was to do complete engine tune-up, namely plugs, points, condenser, plug wires and voltage regulator. Much to my amazement, it started about the third time it turned over and idled beautifully. Not all was good, however, as I had noticed the end of the muffler had rusted thru leaking exhaust fumes into the garage. Kanter Auto Products to the rescue, October, 2015! They had an unused muffler in stock back in the warehouse made in specifically for this car. It went on fine after much wrestling under the Panama. That was enough until spring. I started April, 2016 to work on the braking system. I replaced all four wheel cylinders and rebuilt the vacuum assist master cylinder. What an interesting new experience. It worked out well until I noticed the brake line from the rear to master cylinder was leaking. Stop and replace it. The brakes still need some work and I think I need to replace the return coil spring in the vacuum cylinder since the brakes want to stay on when the engine is running. Pulling the brake pedal up with your toe seems to work but not very handy when driving in traffic or into the garage. My next challenge was to replace all light bulbs and clean contact points to get all the lights working. It was very time consuming and uncomfortable working under the instrument panel lying on your back. After a short drive, I noticed the transmission was leaking fluid out the hole in the bottom of the transmission case. I can t do this repair without a hoist and more knowledge. Time to call Dave & Wally s in Spooner. They were great. They rebuild the transmission and it works great with NO leaks. I still need to work on the speedometer since the needle jumps around and is very noisy. All in all, this has been a challenging and rewarding experience. Judy and I are both looking forward to some enjoyable rides in our Panama. 3

Board of Directors Minnesota Packards Director: Tom Brace 651-603-8827 trbrace@comcast.net Treasurer: John Ward 952-922-8758 jhward@usfamily.net Membership: Marie Heskowitz 763-572-1661 mjhesko@yahoo.

4 Board of Directors Minnesota Packards Director: Tom Brace Treasurer: John Ward Membership: Marie Heskowitz Historians: Tom and Betty Holman Projects: Wayne Kempfert Editor: Bill Heptig MINNESOTA PACKARD CLUB PROJECTS Rear U-Joint Retainer Clips Used on all s. Two needed per car. # & # Include engine size and transmission type. $10 per set. Ignition Switch Instruction Decal This in an exact copy of the original decal that was located under the ignition switches. Just peel off the back and install. $5 per decal. Fender to Body Reinforcing Washers These are exact copies of the following numbers: # as used on the s (except for Sixes and Twelves); # as used on the Sixes, Eight s and Super Eights; # as used on all Senior rear fenders from $25 for a set of eight. Please specify which style is needed. Aluminum Door Sills These sills are professional reproductions of the highest quality, made from original patterns, custom crafted for your car. Send a business-size SASE for new price list of available patterns. All prices are post paid; include year and model on all orders. **** Canadian residents add $10 to cover delivery charges. **** Minnesota Packards P.O. Box Diamond Lake Station Minneapolis, MN wkempfert@hotmail.com For Sale: 1954 Packard Convertible Power steering; power brakes; power seat; automatic transmission; gray with red leather upholstery; windshield washer; power top; Cormorant hood ornament. New whitewall radial tires on chrome wheels. All major mechanical systems have been gone through recently at a reliable restoration shop including: fuel system and carburetor, brakes and master cylinder, cooling system has been repaired and replaced. Located in Minneapolis suburb. Ready to drive away! $32,000 or make an offer. Contact: Marie Heskowitz Home: Cell: mjhesko@yahoo.com 4

5 Minnesota Packards 2018 Events If you have ideas on what events you would like to see in 2018, please shoot us an at or call me at to pass these along. We are interested in ideas where great touring and interesting collections, museums, or other interesting history would make a great driving event. April 28 The Classic Car Club Garage Tour, always a fascinating look at some special car collections in the upper Midwest, and a great spring opener to get the old cars out and drive. Mark your calendars to join us. The event leaves HOOKED ON CLASSICS, 701 Jefferson Ave SW, Watertown, MN at 9:00 a.m. May 6, 2018, 7:00 a.m. 3:00 p.m. at the Minnesota State Fairgrounds Gopher State Buick club hosts 2018 Spring Extravaganza Car Show and Swap Meet, a show for all makes and a chance get the old car out and meet other enthusiasts. $10 to show your car, proceeds to the club. June 16 & 17, Stone Arch Art of the Car Show in Minneapolis. A great Father s Day event and a chance to show off that ride downtown with artists and food nearby. Free, but you must register on the website. July 1-7, The Packard National in Columbus Ohio, this promises to be a special event with trips to several car collections, The Air Force Museum and several tours. A group from Minnesota usually goes, so if you re interested, we may be able to caravan there together. Contact minnpackards@ gmail.com to let us know your plans. 10,000 Lakes Car Show in Excelsior, 9 a.m., July 22, 10,000 Lakes Concurs this is a charity event and the tickets are $20 some of the nicest classic, special interest, sports cars and wood boats to be seen in the Upper Midwest, check out the website at August 17-19, The Minnesota Packards/Hawkeye Packards Joint Meet. Details in a future newsletter. December 2018, A Holiday Luncheon details TBD. 5

Classic Car Club and Packard Club Fall Drive I got up early

Minnesota, using surface streets in St Paul.

destination sure to quicken the heartbeat of any old car

Le Cars is a Top Flite Restoration house that is based in

There specialty is Packard Darrins and Rolls Royce P3 s.

Inside we got a look at the type of Rolls Royce these folks

The P3 is the 12 cylinder car and was made in the 30s.

Being known for a speciality doesn t mean they don t do

They had a nearly complete Model A Pickup and several more

6 Classic Car Club and Packard Club Fall Drive I got up early and drove the 35 Packard form Prior Lake to Stillwater, Minnesota, using surface streets in St Paul. It took me awhile but I made it to Mark Desch s place in time for the days fun. We had a good size group ready to enjoy the day and visit a destination sure to quicken the heartbeat of any old car enthusiast. Le Cars is a Top Flite Restoration house that is based in Cameron, Wisconsin. There specialty is Packard Darrins and Rolls Royce P3 s. As we walked up to the facility, they had a resorted Darrin on display. This was exciting. Our members, John and Jane Caldwell, enjoyed having a look. Inside we got a look at the type of Rolls Royce these folks are known for. The P3 is the 12 cylinder car and was made in the 30s. Clearly this was the sort of car people were driven in. Being known for a speciality doesn t mean they don t do other types of vechicles. They had a nearly complete Model A Pickup and several more modern cars that were undergoing a rebuild plus a rather obscure English car, a 1928 Alvis. Of particular interest to the Packard fans was a Darrin that was in the process of being rebuilt. The organization and meticulous detail is evident in the Darrin that was undergoing a rebuild. The masking was still in place from the paint process and the parts for the project were laid on sheveling next to the vechicle so nothing was lost. 6 (continued on page 7)

CLASSIC CAR CLUB AND PACKARD CLUB FALL DRIVE CONTINUED After enjoying a

folks that owned the shop and some of there co-workers.

facility that was about a half an hour east of Cameron in Roberts, WI.

at the door and escorted us in to have a look around.

vechicles to be seen here. The owner has a passion for motorsports.

I understand the restoration on this was done down under, but not to a

7 CLASSIC CAR CLUB AND PACKARD CLUB FALL DRIVE CONTINUED After enjoying a look around, we adjourned to lunch and had a pleasant visit with the folks that owned the shop and some of there co-workers. They were happy to answer questions and offered us a tour of a second facility that was about a half an hour east of Cameron in Roberts, WI. The owner was out of town at a race event, but his wife Barb greeted us at the door and escorted us in to have a look around. Sandy is a car enthusaist as well and was very familiar with all the vechicles to be seen here. The owner has a passion for motorsports. This car was a late model copy of a Mercedes SSK that apparent was used for a hill climb. There was also a French car that I ve only seen in books, a Vosin. I understand the restoration on this was done down under, but not to a mechanically sound condition. It was fascinating to see none the less. My favorite at this facility was a cream colored Auburn Speedster, a really sporty classic. (continued on page 8) 7

CLASSIC CAR CLUB AND PACKARD CLUB FALL DRIVE CONTINUED This facility also was a site for active restorations and there were were cars in process and awaiting attention.

As I drove vintage, I enjoyed the day behind the wheel but took a different route to avoid the city. It was fine, but a bit time consuming. I made it home by sunset.

, a region of the Packard Automobile Club (PAC), is a not-forprofit corporation dedicated to the preservation and enjoyment of Packard automobiles and related

8 CLASSIC CAR CLUB AND PACKARD CLUB FALL DRIVE CONTINUED This facility also was a site for active restorations and there were were cars in process and awaiting attention. Here are a Nash Coupe and the chassis of a 12 cylnder Rolls. Having viewed a wide variety of interesting vechicles, it was time to head for home. As I drove vintage, I enjoyed the day behind the wheel but took a different route to avoid the city. It was fine, but a bit time consuming. I made it home by sunset. This was a memorable crusie with good company. Life is good. 8 Minnesota Packards, Inc., a region of the Packard Automobile Club (PAC), is a not-forprofit corporation dedicated to the preservation and enjoyment of Packard automobiles and related memorabilia. The Cloisonné Calendar is the official publication of Minnesota Packards and is published three times a year. Subscription is included with membership in MN Packards. Please mail correspondence to: Minnesota Packards P.O. Box 19119, Diamond Lake Station, Minneapolis, MN 55419

CLOISONNÉ CALENDAR. Minnesota Packards and Hawkeye Packards Joint Meet 2017

CLOISONNÉ CALENDAR. Minnesota Packards and Hawkeye Packards Joint Meet 2017 CLOISONNÉ CALENDAR Volume 61 No. 18 Fall 2017 Minnesota Packards and Hawkeye Packards Joint Meet 2017 We were favored with cool weather in August and many decided to drive prewar cars for this event. Our