WLS28 Work Light Strip

Transcription

1 General-purpose LED work lighting for IP50 and IP67/IP69K environments For the latest technical information about this product, including specifications, dimensions, and wiring, see Features High power solid state LED array Designed for enclosure or area lighting Rugged aluminum housing Narrow 8 mm total width Lighted lengths available from 5 mm to 0 mm Low-profile design with included swivel mounting brackets Illuminates a large area with an even pattern of light and no shadows to 0V dc operation Cabled and Quick Disconnect models available Stand-alone and cascadable models available IP50 and IP67/IP69K models available IP50 models available with or without ON/OFF switch Low power consumption; less than 9 watts per foot Lensed model - provides X the illumination focused to where it is needed NOTE: When cascading lights, a model with an ON/OFF switch can be used to control the lights cascaded off of the switched model. Work Light Strip Models Stand-Alone Light cable Stand-Alone Light or End Light in a Cascade QD First Light in a Cascade cable First or Middle of a Cascade QD s are available as either stand-alone models, or as cascade models that can be "daisy-chained" together for a continuous length of lighting, with a minimum of wiring. Stand-alone models have cable or male QD fitting at one end for power connection, no connections at opposite end. A stand-alone model may be used as the last in the cascade series. Cascade models have cable or male QD fitting at one end for power connection, female QD fitting at opposite end for connection to other lights in the cascade. Cascade models with cable end can only be used as the first light in the cascade series. A double-ended accessory cordset (see Cordsets on page 5) must be used between each pair of lights in a cascade. Original Document 55 Rev. G 9 August 0 55

2 Table : IP50 Models Non-Switch Models ON/OFF Switch Models Stand-Alone Cascade Stand-Alone Cascade Lighted Length Power Connector* WLS8XW5X WLS8CW5X WLS8XW5XPB WLS8CW5XPB 5 mm WLS8XW85X WLS8CW85X WLS8XW85XPB WLS8CW85XPB 85 mm WLS8XW0X WLS8CW0X WLS8XW0XPB WLS8CW0XPB 0 mm WLS8XW570X WLS8CW570X WLS8XW570XPB WLS8CW570XPB 570 mm WLS8XW70X WLS8CW70X WLS8XW70XPB WLS8CW70XPB 70 mm m cable WLS8XW850X WLS8CW850X WLS8XW850XPB WLS8CW850XPB 850 mm WLS8XW990X WLS8CW990X WLS8XW990XPB WLS8CW990XPB 990 mm WLS8XW0X WLS8CW0X WLS8XW0XPB WLS8CW0XPB 0 mm *Only cabled power connector models are listed. For -pin M/Euro-style integral power connector, add suffix Q to the model number (for example, WLS8XW85XQ). Table : IP67/IP69K Models Stand-Alone Models Cascade Lighted Length Power Connector* WLS8XW5S WLS8CW5S 5 mm WLS8XW85S WLS8CW85S 85 mm WLS8XW0S WLS8CW0S 0 mm WLS8XW570S WLS8CW570S 570 mm WLS8XW70S WLS8CW70S 70 mm m cable WLS8XW850S WLS8CW850S 850 mm WLS8XW990S WLS8CW990S 990 mm WLS8XW0S WLS8CW0S 0 mm *Only cabled power connector models are listed. For -pin M/Euro-style integral power connector, add suffix Q to the model number (for example, WLS8XW85SQ). - Tel: P/N 55 Rev. G

3 Specifications Supply Voltage and Current to 0 V dc (0% max. ripple) Use only with suitable Class power supply. Max current and power per length: Light Length V dc V dc 0V dc Watts Cool Wht Lumens* 5 C) Wrm Wht 5 mm 0.5A 0.5A 0.A Grn Red Yel Blu 85 mm 0.75A 0.75A 0.A 9 0 mm.5a 0.65A 0.5A mm.5a 0.75A 0.6A 8 70 mm.0a.0a 0.8A 850 mm.5a.5a 0.9A mm.75a.75a.a mm.0a.5a.a * Lumen values lowered by 5% on diffused window models Light Characteristics Color Temperature and Wavelengths Cool White: K Warm White: K Green: nm Red: nm Yellow: nm Blue: nm Useful Life When operating within specifications, output will decrease less than 0% after 50,000 hours. Construction Clear anodized aluminum housing; painted zinc end caps; acrylic window; zinc plated steel brackets Mounting () swivel brackets SMBWLS8RA included and () screws Environmental Rating IEC IP50 (non-sealed models) or IEC IP67/IP69K per DIN 0050 (sealed models) Connections Integral -pin Euro-style QD (-pin connecting cordset required for QD models); or m (6.5 ft) integral cable Operating Temperature 0 C to +50 C ( F to + F) Storage Temperature 0 C to +70 C ( 0 F to +58 F) Certifications L5 models: UL pending Application Notes When connecting cascadable lights in series it is important not to exceed maximum current limitations: Maximum length of light at V dc:.5 m (.9 ft) Maximum length of light at V dc:.0 m (9.8 ft) Maximum length of light at 0 V dc:. m (0. ft) Maximum Ambient Operating Temperature for inside the cabinet of 50 C NOTE: Do not spray cable with high-pressure sprayer, or cable damage will result. P/N 55 Rev. G - Tel:

4 Dimensions.0 mm [0.55 ] 8 mm [.0 ] 8 mm [0. ]. mm [.7 ] mm [0.8 ].5 mm [0.5 ] 8 mm [.0 ] 9.5 mm [0.7 ] 9 mm 0 mm [0.75 ] [.8 ] L5 Models.7 mm dia [0.58 ] M x 0.50 ISO (x) 7.5 mm [0.0 ] 5 mm dia [0.0 ].5 mm [. ] 0.8 mm [0.8 ] Dimensions are shown with included SMBWLS8RA bracket 0.5 mm [0. ] Non-Switch Models IP50 Models IP67/IP69K Models L L L L WLS8..5X WLS8..5S mm (8.7 in) 05 mm (8. in) 5 mm (5.7 in) 75 mm (6.9 in) WLS8..85X WLS8..85S 6 mm (. in) 6 mm (.6 in) 86 mm (.6 in) 6 mm (. in) WLS8..0X WLS8..0S 50 mm (9.8 in) 87 mm (9. in) 7 mm (6.8 in) 57 mm (8.0 in) WLS8..570X WLS8..570S 6 mm (5. in) 68 mm (.7 in) 568 mm (.6 in) 598 mm (.5 in) WLS8..70X WLS8..70S 785 mm (0.9 in) 769 mm (0. in) 709 mm (7.9 in) 79 mm (9. in) WLS8..850X WLS8..850S 96 mm (6.5 in) 90 mm (5.8 in) 850 mm (.6 in) 880 mm (.6 in) WLS8..990X WLS8..990S 067 mm ( in) 05 mm (. in) 99 mm (9.0 in) 0 mm (0. in) WLS8..0X WLS8..0S 08 mm (7.6 in) 9 mm (6.9 in) mm (.57 in) 6 mm (5.7 in) ON/OFF Switch Models Model L L L L WLS8..5XPB 5 mm (9.9 in) 5 mm (9. in) 5 mm (5.7 in) 05 mm (8. in) WLS8..85XPB 9 mm (5. in) 76 mm (.8 in) 86 mm (.6 in) 6 mm (.6 in) WLS8..0XPB 5 mm (.0 in) 57 mm (0. in) 7 mm (6.8 in) 87 mm (9. in) WLS8..570XPB 67 mm (6.5 in) 658 mm (5.9 in) 568 mm (.6 in) 68 mm (.7 in) WLS8..70XPB 85 mm (. in) 799 mm (.5 in) 709 mm (7.9 in) 769 mm (0. in) WLS8..850XPB 956 mm (7.6 in) 90 mm (7 in) 850 mm (.6 in) 90 mm (5.8 in) WLS8..990XPB 097 mm (. in) 08 mm (.6 in) 99 mm (9.0 in) 05 mm (. in) WLS8..0XPB 8 mm (8.7 in) mm (8. in) mm (.57 in) 9 mm (6.9 in) - Tel: P/N 55 Rev. G

5 Wiring + 0 V dc Female Male Wiring Key: = Brown = Blue Accessories Cordsets Single-ended cordsets are for use between power source and QD connection of stand-alone light or first light in a cascade. Double-ended cordsets are for use between lights in a cascade. Single-Ended Cordsets -Pin Threaded M/Euro-Style Cordsets Model Length Style Dimensions Pinout MQDC-06 MQDC-5 MQDC-0 MQDC-50.8 m (6 ft).57 m (5 ft) 9. m (0 ft) 5. m (50 ft) Straight Typ. M x ø.5 MQDC-06RA MQDC-5RA.8 m (6 ft).57 m (5 ft) Typ. [.6"] = Brown = White = Blue = Black MQDC-0RA 9. m (0 ft) MQDC-50RA 5. m (50 ft) Right-Angle 0 Typ. [.8"] M x ø.5 [0.57"] Double-Ended Cordsets P/N 55 Rev. G - Tel:

6 -Pin Threaded M/Euro-Style Cordsets Double Ended Model Length Style Dimensions Pinout MQDEC-0SS MQDEC-0SS MQDEC-06SS MQDEC-SS MQDEC-0SS MQDEC-0SS MQDEC-50SS 0. m ( ft) 0.9 m ( ft).8 m (6 ft).66 m ( ft) 6.0 m (0 ft) 9. m (0 ft) 5. m (50 ft) Male Straight/ Female Straight 0 Typ. [.58"] M x ø.5 [0.57"] Typ. [.7"] M x ø.5 [0.57"] = Brown = White = Blue = Black Splitter Cordsets -Pin Threaded M/Euro-Style Splitter Cordsets Flat Junction Model Branches (Female) Trunk (Male) Dimensions Pinout CSB-M0M0 No branch No trunk CSB-M0M CSB-MM CSB-M8M CSB-M5M CSB-M5M CSB-UNT5M x 0.0 m ( ft) No trunk 0.0 m ( ft).50 m (8 ft).57 m (5 ft) 7.60 m (5 ft) 7.60 m (5 ft) Unterminated Ø.5 [0.57"] M x 0 Typ. [.58"] 5 [.8"] Ø.5 [0.8"].0 [.69"] 8.0 [0.7"] Typ. [.7"] Ø.5 [0.57"] M x = Brown = White = Blue = Black Replacement Bracket and Unistrut Mounting Hardware SMBWLS8RA The bracket kit is available as a replacement for the one that comes with the Work Light Strip. The kit contains two end brackets and four screws. SMBWLS8SM This kit allows the light to be mounted at a right angle to the mounting surface. The kit contains two end brackets and four screws Tel: P/N 55 Rev. G

7 SMH6 This kit allows the light to be mounted to a /6-inch Unistrut channel. The kit includes: #0- spring nuts (qty ) #0- socket head cap screws (qty ) #0 lock washers (qty ) SMBWLSMAG Magnetic mounting bracket for easy attachment to steel surfaces SMBWLSMAGR Protective cover also available to prevent scratches to painted surfaces Banner Engineering Corp Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. - Tel: