Tool & Product Update
|
|
- Barbara Rogers
- 5 years ago
- Views:
Transcription
1 Tool & Product Update NOSE ASSEMBLY TO TOOL ADAPTER MATRIX AND DRAWINGS On the following page is a list of every currently available Adapter Assembly combination. Please use the list as a reference when selecting a Nose Assembly to Tool Adapter. For each Adapter Assembly, a reference drawing is supplied on the following pages unless otherwise stated. If a Stroke Limiter is required, the part number is listed under Comments. If no part number is listed, and a Stroke Limiter is required, please call Customer Service at the toll-free number below to obtain the correct part number. For more information or to order, please contact your local distributor or call direct: Alcoa Fastening Systems 1 Corporate Drive Kingston, NY PKG n/a GRP 1, 2, 4, 5, 7-12, 15, 16, Page 1 of 45 04/28/2006
2 PART NO. NOSE ASSEMBLY TYPE TOOL TYPE COMMENTS PAGE & & style Inline 353, 245, , 585, style , 352 Inline Rotatable Adapter 352 Allows 352 Noses to Rotate Rotatable Adapter 353 Allows 353 Noses to Rotate Offset for UNIMATIC BR 212, s Rotatable Adapter 245 style Stroke Limiter Req d s Rotatable Adapter Stroke Limiter Req d (call for Part No.) s Rotatable Adapter 2580 Stroke Limiter Req d (call for Part No.) style G s & 1700s -05,06,08 Offset 245, 255 style Stroke Limiter Req d s & 1700s -05,06,08 Offset 2580 style Stroke Limiter PR2344 Req d s Rotatable Adapter 245 style Stroke Limiter Req d s Rotatable Adapter 2580 Stroke Limiter Req d (call for Part No.) Spindle/Piston to fit 230 style Noses 245, 255 style HK-150 Connects to TM6CC and TM8CC n/a s -10,12 Lockbolt s -10 Lockbolt 245, 255 style s -05,06 Rotatable Adapter s G s G G s G s -05,06,08 Rotatable Adap s Offs -05,06 BB/BR Rot.Ad 202, s 244, 2480, 202, s S456 HK A, , & Olympic series 194, style 230 1/2 Stroke max style 244 3/8 Stroke max s Offset BR 230 ONLY s Offset BR 202, HUCKLINCH Offset 202, HUCKLINCH Offset 230 ONLY style Inline; 1/4 max , /8 Pass Thru 353 style noses s Offset style 5901, 2620 style s Offset formerly PR Anvil & Collet Extension 352 style 202 length Anvil & Collet Extension 352 style 202 length style noses PT4000 up to & including -06 dia & 2480 style noses HK-150 with pass thru cap style noses PT4000 up to & including -08 dia Self-Releasing L-suffix noses only HK PR style nose Extension length Page 2 of 45 04/28/2006
3 Page 3 of 45 04/28/2006
4 Page 4 of 45 04/28/2006
5 Page 5 of 45 04/28/2006
6 Page 6 of 45 04/28/2006
7 Page 7 of 45 04/28/2006
8 Page 8 of 45 04/28/2006
9 Page 9 of 45 04/28/2006
10 Sheet 1 of 2 Page 10 of 45 04/28/2006
11 Sheet 2 of 2 Page 11 of 45 04/28/2006
12 Page 12 of 45 04/28/2006
13 PINTAIL TUBE RETAINING NUT COLLET ADAPTER ANVIL ADAPTER ADAPTER ASSEMBLY MODEL G743 CHERRY TOOL Page 13 of 45 04/28/2006
14 Page 14 of 45 04/28/2006
15 Page 15 of 45 04/28/2006
16 Page 16 of 45 04/28/2006
17 Page 17 of 45 04/28/2006
18 Page 18 of 45 04/28/2006
19 Page 19 of 45 04/28/2006
20 Page 20 of 45 04/28/2006
21 Page 21 of 45 04/28/2006
22 Page 22 of 45 04/28/2006
23 Page 23 of 45 04/28/2006
24 Page 24 of 45 04/28/2006
25 Page 25 of 45 04/28/2006
26 C Page 26 of 45 04/28/2006
27 Page 27 of 45 04/28/2006
28 SPINDLE ADAPTER ANVIL ADAPTER Page 28 of 45 04/28/2006
29 Page 29 of 45 04/28/2006
30 Page 30 of 45 04/28/2006
31 Page 31 of 45 04/28/2006
32 Page 32 of 45 04/28/2006
33 Page 33 of 45 04/28/2006
34 Page 34 of 45 04/28/2006
35 Page 35 of 45 04/28/2006
36 Page 36 of 45 04/28/2006
37 Page 37 of 45 04/28/2006
38 Page 38 of 45 04/28/2006
39 Page 39 of 45 04/28/2006
40 Page 40 of 45 04/28/2006
41 Page 41 of 45 04/28/2006
42 Page 42 of 45 04/28/2006
43 Page 43 of 45 04/28/2006
44 Page 44 of 45 04/28/2006
45 Page 45 of 45 04/28/2006
EBBERT RIVETING SOLUTIONS SALES & ENGINEERING GUIDE
EBBERT RIVETING SOLUTIONS SALES & ENGINEERING GUIDE 06-05-015 HK1060 CONTENTS CONTENTS... TOOLS ERT1S... & 4 ERTS...5 & 6 ERTS...7 & 8 ERT4S...9 & 10 ERT5S...11 & 1 ERT6S...1 & 14 ERTSMQ...15 & 16 ERT9
More informationGP Groove Proportioned Lockbolt Fasteners 13 GPL3SC GPL4SC GPL7TP GPL8TP GPL3SP GPL7TC GPL8TC. MGP Groove Proportioned Lockbolt Fasteners 19
2013 HUCK AEROSPACE INSTALLATION EQUIPMENT OCT 2013 Contents C Introduction 7 1 2 3 4 5 6 7 8 GP Groove Proportioned Lockbolt Fasteners 13 GPL3SC GPL4SC GPL7TP GPL8TP GPL3SP GPL7TC GPL8TC MGP Groove Proportioned
More informationSpecial Applications Require Special Tools
Index Routers.................. 102-103 Tappers..................... 104 Clinch Nut Tools.............. 106 Rivet Shavers................ 107 Skin Clamp Runners........... 108 Saws................... 109-110
More informationGB2581 GAGE BILT MADE IN U.S.A. INSTALLATION TOOL
GB2581 INSTALLATION TOOL GAGE BILT TOOLS ARE AVAILABLE WORLDWIDE E-MAIL US FOR DISTRIBUTOR NEAR YOU. GAGE BILT MADE IN U.S.A. GAGE BILT Inc. 44766 Centre Court (586) 226-1500 Clinton Twp. MI 48038 (586)
More informationDynafile III. Tool Assembly. Parts Page Reorder No. PD05 16 Effective March, Models:
Parts Page Reorder No. PD05 16 Effective March, 2005 Models: Dynafile III 15400 Basic ool w/11206 Contact Arm 15401 Basic ool w/11287 Contact Arm Air Motor and Machine Parts Always operate, inspect and
More informationGAGE BILT. AEROSPACE Blind Rivet and Lockbolt Installation Tools RIVET TOOLS. Catalogs. Website. Made in the USA
GAGE BILT RIVET TOOLS Made in the USA AEROSPACE Blind Rivet and Lockbolt Installation Tools Catalogs Website Blind Rivet & Lockbolt Tools GB51 Pneumatic 2.5 pounds.740 stroke 1000 lb. (4.45kN) pull force
More informationGB51 GAGE BILT MADE IN U.S.A. PNEUMATIC INSTALLATION TOOL
ORIGINAL INSTRUCTIONS GB51 PNEUMATIC INSTALLATION TOOL PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS. GAGE BILT MADE IN U.S.A. GAGE BILT TOOLS ARE AVAILABLE WORLDWIDE E-MAIL US FOR A DISTRIBUTOR
More informationGB7624 GAGE BILT MADE IN U.S.A. HYDRAULIC INSTALLATION TOOL
GB7624 HYDRAULIC INSTALLATION TOOL PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS. GAGE BILT TOOLS ARE AVAILABLE WORLDWIDE E-MAIL US FOR DISTRIBUTOR NEAR YOU. GAGE BILT MADE IN U.S.A. GAGE BILT
More informationModels: Standard Machine, NWN Machine Screw Guide Screw Screw Button Screw Support Rod
Effective Serial Number Reference Table Model Number Serial Number 40320, 40321 36300 40326 1284 40330 3001 40335 1129 Models: 40320 Standard Machine 40326 20-1/2" Long Belt Machine 40330 Vacuum Machine
More informationHUCK FASTENERS HUCK FASTENERS HUCK FASTENERS HUCK FASTENERS HUCK FASTENERS HUCK FASTENERS HUCK FASTENERS HUCK FASTENERS INSTRUCTION MANUAL
INSTRUCTION MANUAL 230 PNEUDRAULIC INSTALLATION TOOL HUCK FASTENERS HUCK FASTENERS HUCK FASTENERS HUCK FASTENERS HUCK FASTENERS HUCK FASTENERS HUCK FASTENERS HUCK FASTENERS U.S. Patent 4,878,372; 4,964,292
More information44766 Centre Court (586) Clinton Twp. MI (586) Fax
44766 Centre Court (586) 226-1500 Clinton Twp. MI 48038 (586) 226-1505 Fax e-mail solutions@gagebilt.com/ www.gagebilt.com Tool Open End Muti-Grip Klamptite T Monobolt Plastic Split Nail Structural Bulbtite
More informationGB2620 GAGE BILT MADE IN U.S.A. INSTALLATION TOOL
GB2620 INSTALLATION TOOL GAGE BILT TOOLS ARE AVAILABLE WORLDWIDE E-MAIL US FOR DISTRIBUTOR NEAR YOU. GAGE BILT MADE IN U.S.A. GAGE BILT Inc. 44766 Centre Court (586) 226-1500 Clinton Twp. MI 48038 (586)
More informationTooling. Catalogue. Get last version on.
Tooling Catalogue Get last version on http://www.afsrhuck.net/en/products/tooling.html Go on the web page: http://www.afsrhuck.net/en/products/tooling.html Click on the «Aerospace Tooling Catalog» button
More informationGB2620 GAGE BILT MADE IN U.S.A. INSTALLATION TOOL
GB2620 INSTALLATION TOOL GAGE BILT TOOLS ARE AVAILABLE WORLDWIDE E-MAIL US FOR DISTRIBUTOR NEAR YOU. GAGE BILT MADE IN U.S.A. GAGE BILT Inc. 44766 Centre Court (586) 226-1500 Clinton Twp. MI 48038 (586)
More informationDesign principle / Technical features
Design principle / Technical features Components and construction groups IV 4 Stationary opening unit - Construction group IV. Non-rotating distributor. Non-rotating housing. Housing, axial movable Power
More informationINSTRUCTION MANUAL HYDRAULIC INSTALLATION TOOLS
INSTRUCTION MANUAL HYDRAULIC INSTALLATION TOOLS 2624 2628 P R 2630 2624HS 04-01-2004 HK1052 2 CONTENTS EU DECLARATION OF CONFORMITY.............................2 CONTENTS.................................................3
More informationGB745 GAGE BILT MADE IN U.S.A. INSTALLATION TOOL
GB745 INSTALLATION TOOL GAGE BILT TOOLS ARE AVAILABLE WORLDWIDE E-MAIL US FOR A DISTRIBUTOR NEAR YOU. GAGE BILT MADE IN U.S.A. GAGE BILT Inc. 44766 Centre Court (586) 226-1500 Clinton Twp. MI 48038 (586)
More informationORIGINAL INSTRUCTIONS GB2480/GB2480(A) HYDRAULIC INSTALLATION TOOL
ORIGINAL INSTRUCTIONS GB2480/GB2480(A) HYDRAULIC INSTALLATION TOOL GAGE BILT TOOLS ARE AVAILABLE WORLDWIDE E-MAIL US FOR A DISTRIBUTOR NEAR YOU. GAGE BILT MADE in USA 44766 Centre Court Clinton Twp. MI
More informationGBP784B INSTALLATION TOOL
GBP784B INSTALLATION TOOL GAGE BILT MADE IN U.S.A. GAGE BILT PRODUCTS CORP. 14500 Barber Drive (586) 771-7664 Warren, Mi 48088 (586) 771-2665 Fax e-mail:solutions@gagebilt.com / www.gagebilt.com TABLE
More informationSeries SS Solid Stainless Cylinders
Series SS Solid Stainless Cylinders Pneumatic to 200 PSI Hydraulic to 000 PSI Non shock 3/4, /8,, 2 Bore To Help Brighten Your Corner of the World. All exterior components 300 series stainless A U R O
More informationair pressure intensifier for increased thrust consistent clamp force min to max collet spacing ergonomic design
Formerly Hi-Shear Tooling Official Distributor: SPACEMATIC Wm. Lees & Sons Ltd. United Kingdom Telephone: +44 (0) 1698 426662 Email: sales@ Website: ULTRALITE TM DRILLING MACHINES Model 1000II Standard
More informationLM5200 milling machine
LM5200 milling machine 2013 10 LM52 Linear and Gantry Milling in one machine, for X-Axis travel of up to 84 inches (2133.6 mm) and Y-Axis travel of up to 34 inches (863.6 mm). The Climax LM5200 Milling
More informationGB752 GAGE BILT MADE IN U.S.A. INSTALLATION TOOL
GB752 INSTALLATION TOOL GAGE BILT MADE IN U.S.A. GAGE BILT TOOLS ARE AVAILABLE WORLDWIDE E-MAIL US FOR A DISTRIBUTOR NEAR YOU. GAGE BILT Inc. 44766 Centre Court (586) 226-1500 Clinton Twp. MI 48038 (586)
More informationORIGINAL INSTRUCTIONS G85D-S
TM-G85D-S Rev: G, DATE: 4/30/5, DCR# 5-0403 Federal Identification Code: 85 05 Cherry Aerospace ORIGINAL INSTRUCTIONS G85D-S Split Lockbolt Power Riveter 4 E. Warner Ave, Santa Ana, CA 9705 Tel: -74-545-55
More informationINSTRUCTION MANUAL HS24LH HYDRAULIC INSTALLATION TOOL
INSTRUCTION MANUAL HS24LH HYDRAULIC INSTALLATION TOOL Form HK 1024 04-22-2004 EU Declaration of Conformity Manufacturer: Huck International, Inc., Installation Systems Division, 1 Corporate Drive, Kingston,
More informationG84. Original Instructions. Lockbolt Power Tool
Original Instructions G84 Lockbolt Power Tool 1224 E. Warner Ave, Santa Ana, Ca 92705 Tel: 1-714-545-5511 Fax: 1-714-850-6093 www.cherryaerospace.com THE G84 TOOL TABLE OF CONTENTS Description...3 Specifications
More informationSTANDARD SERIES VALVE SEAT CUTTERS (for use with standard series pilots,.375" top)
PA R T S L I S T STANDARD SERIES VALVE SEAT S (for use with standard series pilots,.375" top) 28.6mm 1-1/8" 31.8mm 1-1/4" 35mm 1-3/8"! OF 15 3 250 243 30 3 250 278 30 3 253 299 30 x 45 3/3 250 274 45 3
More informationInstruction Manual 2502 & A2502 SERIES HYDRAULIC INSTALLATION TOOL Form HK 837
Instruction Manual 2502 & A2502 SERIES HYDRAULIC INSTALLATION TOOL 03-10-2004 Form HK 837 EU Declaration of Conformity Manufacturer: Huck International Inc., Installation Systems Division, 85 Grand Street,
More information1 JULY ~ 30 AUGUST 2013 Micro - Tec
*All Prices Excl VAT* WINTER SPECIALS E&OE 1 JULY ~ 30 AUGUST 2013 KI-1312 R1 277.00 Sq. Dr Heavy Duty Composite Mini * Impact Wrench *Handle Exhaust with Muffler Sq. Dr: : 11000RPM : Max Torque: 60 NM
More informationHucktainer For Metal-Clad Polymer Core Composite and Fiberglass Reinforced Panel Structures
Hucktainer For Metal-Clad Polymer Core Composite and Fiberglass Reinforced Panel Structures Weather Resistant Installs in Seconds Corrosion Resistant Hucktainer Bringing Huck Quality to Composite Panel
More informationINSTRUCTION MANUAL HYDRAULIC INSTALLATION TOOLS
INSTRUCTION MANUAL HYDRAULIC INSTALLATION TOOLS HUCK SPINC UTTER COLLAR CUTTING KITS 03-04-2005 HK1055 2 CONTENTS SAFETY...................................................4 SPECIFICATIONS.............................................5
More informationWherever you are there is a qualified service engineer available to meet your service needs.
Amera-Seiki service is begins with its nationwide chain of dealers, factory trained and well educated in its machine tools. As well, Amera Seiki fields a full complement of factory direct engineers covering
More informationCaliper Disc Brakes. Description H-1. Technical Data and Selection Procedure H DP100 Caliper H-4. HC3 and HD3 Calipers H-7
Eaton Corporation Airflex Division 9919 Clinton Road Cleveland, Ohio 44144-1077 Caliper Disc Brakes H Phone (216) 281-2211 Fax: (216) 281-3890 Description H-1 Technical Data and Selection Procedure H-2
More informationGB751 GAGE BILT MADE IN U.S.A. INSTALLATION TOOL
GB751 INSTALLATION TOOL GAGE BILT TOOLS ARE AVAILABLE WORLDWIDE E-MAIL US FOR A DISTRIBUTOR NEAR YOU. GAGE BILT MADE IN U.S.A. GAGE BILT Inc. 44766 Centre Court (586) 226-1500 Clinton Twp. MI 48038 (586)
More informationINSTRUCTION MANUAL HYDRAULIC INSTALLATION TOOLS PT
INSTRUCTION MANUAL HYDRAULIC INSTALLATION TOOLS 3585 3585PT August 20, 2014 HK1080 2 CONTENTS EC Declaration of Conformity..................... 2 Safety......................................... 4 Description.....................................
More informationCUSTOM ADD-ONS FOR ENGLISH UNITS
Spindles Flange Piloted Slot Collet Jacobs Taper Morse Taper See note on next page for location in the Specification Code No. Description A B C AA Flange 2.625 3.619/3.621 5.313 AB Piloted Slot 2.3125
More informationInstruction Manual 3585 series Hydraulic Installation Tools
Declaration of Conformity 2 Safety Instructions 3-4 Instruction Manual 3585 series Hydraulic Installation Tools Tool Description 5 Specifications 5 Principle of Operation 6 3585 Preparation for Use 7 3585PT
More informationService Instructions. Syntron Electromagnetic Vibratory Feeder Model: F-212-B
Service Instructions Syntron Electromagnetic Vibratory Feeder Model: F-212-B Service Instructions Syntron Electromagnetic Vibratory Feeder Model: F-212-B Spring Replacement Parts List Coil and/or Core
More informationINSTRUCTION MANUAL 940HS & HS POWERIG HYDRAULIC UNIT Form HK943
INSTRUCTION MANUAL 940HS & 940-0HS POWERIG HYDRAULIC UNIT 05-5-004 Form HK943 SAFETY This instruction manual must be read with particular attention to the following safety guide lines, by any person servicing
More informationIllustrated Parts Catalogue Woodward Diesel Systems. Illustrated Parts Catalogue. Perkins Engines (formerly Rolls-Royce) Pumps & Injectors
Illustrated Parts Catalogue Illustrated Parts Catalogue Woodward Diesel Systems Perkins Engines (formerly Rolls-Royce) Pumps & Injectors Manual 55181 General This Illustrated Parts Catalog (IPC) is designed
More informationPHONE /
WESCON DSI DESIGNED SOLUTIONS INCORPORATED AIRFRAME ASSEMBLY TOOLS AND RELATED SERVICES PHONE 949.444.3807 / info@wescondsi.com 20551 PASCAL WAY LAKE FOREST, CA 92630 USA "DESIGNED SOLUTIONS" With over
More informationEffective January, 2000 Supercedes PD95 54 Models: 3 = Loctite #242, A 9 = Loctite #587. Models: Standard Machine, NWN Machine 16 A 9
For Serial No. 9K2915 and Higher Parts Page Reorder No. PD00 05 O Oil: O 1 = Air Lube KEY Effective January, 2000 Supercedes PD95 54 Models: G Grease: = Loctite #771 40320 Standard Machine A Adhesive:
More informationB SERIES. Bulletin B-2017
Bulletin B-207 B SERIES Versa Product Company, Inc., 22 Spring Valley Rd., Paramus, NJ 0762 USA Phone: (20) 4-2400 Fax: (20) 4-29 Versa BV, Prins Willem Alexanderlaan 427, 72 GB Apeldoorn, The Netherlands
More informationJuly 2018 ONLY FOR LT3000 M/MY. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
ONLY FOR OKUMA July 2018 LT3000 M/MY www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling: Only for Okuma Velocity Products has the largest inventory
More informationGB204/GB204A GAGE BILT MADE IN U.S.A. INSTALLATION TOOL
GB204/GB204A INSTALLATION TOOL GAGE BILT MADE IN U.S.A. GAGE BILT TOOLS ARE AVAILABLE WORLDWIDE E-MAIL US FOR A DISTRIBUTOR NEAR YOU. GAGE BILT Inc. 44766 Centre Court (586) 226-1500 Clinton Twp. MI 48038
More informationLM5200 MILLING MACHINE
LM5200 MILLING MACHINE 2017 12 LM52 Linear and Gantry Milling in one machine, for X-Axis travel of up to 84 inches (2133.6 mm) and Y-Axis travel of up to 34 inches (863.6 mm). The Climax LM5200 Milling
More informationINSTRUCTION MANUAL MODEL 5901 HYDRAULIC INSTALLATION TOOL
INSTRUCTION MANUAL MODEL 5901 HYDRAULIC INSTALLATION TOOL Form HK 499 03-18-2004 EU Declaration of Conformity Manufacturer: Huck International Inc., Installation Systems Division, 85 Grand Street, Kingston,
More informationINSTRUCTION MANUAL ENGINE IDLER MODEL # YEAR WARRANTY KUSSMAUL ELECTRONICS CO., INC.
10-19-96 INSTRUCTION MANUAL ENGINE IDLER MODULE PART OF A HIGH IDLE SYSTEM ENGINE IDLER MODEL #091-84-005 3 YEAR WARRANTY ELECTRONICS CO., INC. 170 CHERRY AVE., WEST SAYVILLE, N.Y. 11796 TEL: in NY 631-567-0314
More informationCleveland P/N. Replaces OEM P/N (A ) 60-5 ( ) 10-24D ( )
Applicability Data FAA-PMA Product Directory Replacement Equipment Master Cylinder Actuator Shimmy Damper Model/ Name Year/ Serial Number American Champion Aircraft Corp. 8KCAB 8GCBC All 10-54 (010-05400)
More informationCX 4 Heavy Duty Precision CNC Lathe
X 4 The X Series heavy duty precision N lathe by Kingston is designed for heavy and long work pieces for the energy, mining, textile, paper, and transportation industries. Utilizing the same headstock
More informationCollet Chucks for 5C / 16C / 3J Collets
Precision Workholding Technology ollet hucks for 5 / 16 / 3J ollets 5W Wide Opening ollet hucks www..com 5-ND Dead Length ollet hucks huck Features Dead length design with reduced nose for full size machines
More informationINSTRUCTION MANUAL ENGINE IDLER MODEL # VOLTGAE MONITOR MODEL # YEAR WARRANTY KUSSMAUL ELECTRONICS CO., INC.
FILE: 091-84.P65 date: 06-02-99 INSTRUCTION MANUAL ENGINE IDLER MODULE PART OF A HIGH IDLE SYSTEM ENGINE IDLER MODEL #091-84-005 VOLTGAE MONITOR MODEL #091-84-004 3 YEAR WARRANTY KUSSMAUL ELECTRONICS CO.,
More information3-Jaw High-Speed Open-Center Chuck
HS Standard 3-Jaw High-Speed Open-Center Chuck Application / Customer's Benefit Standard high-speed 3-jaw wedge-style opencenter power chuck Technical features Gripping force transmisstion by wedge structure
More informationDC3000 Series. Door Closers
Door Closers Table of Contents Applications 2 Features 3 & 4 Mountings 5 & 6 Door Closer Arms 7 & 8 Mounting Brackets 9 Brackets and Covers 10 Size and Handing 11 How to Order 12 Quick Codes 13 Helpful
More informationInstruction Manual 256 Pneudraulic Installation Tool
Declaration of Conformity 2 Instruction Manual 256 Pneudraulic Installation Tool Patent Pending Safety Instructions 3 Principle of Operation 4 Tool Specifications 4 Preparation for Use 5 Maintenance 5
More informationCHAPTER 4 PARTS. 1234av This chapter describes assemblies/subassemblies/parts considered replaceable at on-site field installation.
CHAPTER 4 PARTS PARTS LIST 1234av This chapter describes assemblies/subassemblies/parts considered replaceable at on-site field installation. NOTE: The following is a breakdown description of the Serial
More informationVermeer Newsroom Vertical Multiple Dealer List Ad Fixed Depth (Example shown is 7.5" wide x 10.25" tall at 70% scale)
GET IN LINE. It takes a special baler to withstand the tough conditions and tight timeframes of baling cornstalks. The Vermeer 605N Cornstalk Special balers are equipped with heavy-duty components to bale
More informationRSD FIRE PROTECTION, INC 737 SO. CEDAR ROAD NEW LENOX, ILLINOIS
RSD FIRE PROTECTION, INC 737 SO. CEDAR ROAD NEW LENOX, ILLINOIS 815-463-9985 Job Name : 66 ORLAND SQUARE DRIVE - MRA 1 Building : FP1 Location : 66 ORLAND SQUARE DRIVE, ORLAND PARK, ILLINOIS System : MRA
More informationRSD FIRE PROTECTION, INC 737 SO. CEDAR ROAD NEW LENOX, ILLINOIS
RSD FIRE PROTECTION, INC 737 SO. CEDAR ROAD NEW LENOX, ILLINOIS 815-463-9985 Job Name : 66 ORLAND SQUARE DRIVE - MRA 3 Building : FP1 Location : 66 ORLAND SQUARE DRIVE, ORLAND PARK, ILLINOIS System : MRA
More informationOur History Index 1/4" -28 Tapered Thread Fittings 1/4" NPT Fittings
R FITTINGS GREASE GREASE FITTINGS & TRADING CO., INC. 63 AUSTIN BLVD COMMACK NY 11725 TEL: (631)543-4490 FAX (631)543-4496 TOLL FREE: 1-800-669-3962 www.dynatronindustries.com Our History When A&M Trading
More informationFOR EVERY APPLICATION
FOR EVERY APPLICATION In order to be able to satisfy every application, RÖHM has hydraulically, pneumatically as well as electrically actuated cylinders with through-hole in their product range. hydraulical
More informationSERIES 4000 PERFORMANCE DATA MODELS H/V4002, H/V4004, H/V4002M, H/V4002S, H/V4004S, H/V4002SM
SERIES PERFORMANCE DATA Ac ft² CFM 24 36 48 60 72 84 96 120 06x04 0.17 NC - - - - - - 11 18 Throw 2-4-8 4-6-11 5-8-13 7-10-14 8-11-16 9-12-17 10-13-18 12-14-20 Ac ft² CFM 38 57 76 95 114 133 152 190 06x06
More informationParts list. See Frame parts list Page 12. See hydraulic pump. exploded view. Page 14. See work head. exploded view. Page 7
Parts list See Frame parts list Page 12 See hydraulic pump exploded view Page 14 See work head exploded view Page 7 See electrical parts list Page 18 See hoist parts list Page 11 See Frame parts list Page
More information7142 & Instruction Manual. Hydraulic Installation Tool Safety Instructions 3-4. Description 5.
Safety Instructions 3-4 Instruction Manual 7142 & 8142 Hydraulic Installation Tool Description 5 Specifications 5 Principle of Operation 5 Preparation for Use 6 7142 7142-20 Operating Instructions 7 Maintenance
More informationKomo Sample Code Package Komo Machine, Inc.
Komo Sample Code Package 2013 Komo Machine, Inc. 2 Komo Sample Code 1 Komo Sample Code Enclosed is a sample of code for Komo machines in standard configurations. Each of the standard Komo routers comes
More informationSIOUX TOOLS, INC. POWER TOOLS WARRANTY
E A SELZER AEROSPACE AEROSPACE SIOUX TOOLS, INC. POWER TOOLS WARRANTY SIOUX TOOLS, INC. WARRANTS TO THE ORIGINAL PURCHASER THAT THE COMPANY S POWER TOOLS ARE FREE FROM DEFECTS IN MATERIALS AND WORKMANSHIP.
More informationMarson Rivets and Rivet Nut Installation Tools
Marson Rivets and Rivet Nut Installation Tools Marson Manual Rivet Tools HP-2 Professional Hand Rivet Tool (M39000)* The HP-2 is the number one selling hand rivet tool in the industry. Known and trusted
More informationGB745 GAGE BILT MADE IN U.S.A. INSTALLATION TOOL
GB745 INSTALLATION TOOL GAGE BILT TOOLS ARE AVAILABLE WORLDWIDE E-MAIL US FOR A DISTRIBUTOR NEAR YOU. GAGE BILT MADE IN U.S.A. GAGE BILT Inc. 44766 Centre Court (586) 226-1500 Clinton Twp. MI 48038 (586)
More informationAIR TOOLS TABLE OF CONTENTS IMPACT WRENCHES AIR RATCHETS DIE GRINDERS
AIR TOOLS TABLE OF CONTENTS IMPACT WRENCHES.......... 454-458 AIR RATCHETS.............. 459 DIE GRINDERS.............. 460 PISTOL GRIP IMPACT WRENCHES T itanium housing helps to reduce weight, improve
More informationGBP745D/204 GAGE BILT MADE IN U.S.A. INSTALLATION TOOL
GBP745D/204 INSTALLATION TOOL GAGE BILT TOOLS ARE AVAILABLE WORLDWIDE E-MAIL US FOR A DISTRIBUTOR NEAR YOU. GAGE BILT MADE IN U.S.A. GAGE BILT Inc. 44766 Centre Court (586) 226-1500 Clinton Twp. MI 48038
More informationTEST CURRENT MAXIMUM ZENER IMPEDANCE
1N5221B THRU 1N5278B SILICON ZENER DIODES 500mW, 2.4 THRU 170 VOLT 5% TOLERANCE DESCRIPTION: The CENTRAL SEMICONDUCTOR 1N5221B series silicon Zener diodes are highly reliable voltage regulators designed
More informationDirectional Controls. Solenoid Controlled Pilot Operated Directional Valve. Vickers DF5S4(L)-16*A/B/C/N-(*)-(E)*-53. Service Data I 3622-S
Service Data Vickers Directional Controls Solenoid Controlled Pilot Operated Directional Valve DF5S4(L)-16*-(*)-(E)*-53 Revised 2/01/98 I 3622-S See back page for solenoid indicator lights. Pilot Attaching
More informationKEY. Oil. Grease. Loctite/Hernon: L 2 = Hernon #940. Torque: N m x 8.85 = In. - lbs. T 2 = 17 N m, T 3 = 23 N m Threaded Insert
Model: 11000 11001 Versatility Kit 11003 w/benchmount O L T Oil KEY G Grease Loctite/Hernon: L 2 = Hernon #940 Torque: N m x 8.85 = In. - lbs. T 2 = 17 N m, T 3 = 23 N m Parts Page Reorder No. PD97 01
More informationLM5200 MILLING MACHINE
LM5200 MILLING MACHINE Linear and Gantry Milling in one machine, for X-Axis travel of up to 84 inches (2133.6 mm) and Y-Axis travel of up to 34 inches (863.6 mm). 04 2018 LM52 The Climax LM5200 Milling
More informationLM6200 milling machine
LM6200 milling machine Linear and Gantry Milling in one machine, with x-axis travel up to 176 inches (4470.4 mm) and y-axis travel up to 106 inches (2692.4 mm) 4 2013 LM62 The Climax LM6200 Milling Machine
More informationULTRALITE SPACEMATIC. Nutplate Drillmotor II/IIB DRILLING MACHINES
SPACEMATIC TM ULTRALITE DRILLING MACHINES Nutplate Drillmotor II/IIB One hand operation to locate, drill and countersink both rivet holes in a single 4 second operation. Tool is easily converted from one
More informationEPS4 series. Instruction Manual. Ebbert Power Source. Safety Instructions 3. Description 4. Specifications 4. Principle of Operation 5.
590441 REV B Instruction Manual EPS4 series Ebbert Power Source Safety Instructions 3 Description 4 Specifications 4 Principle of Operation 5 EPS4 Maintenance 5 EBBERT ENGINEERING TM Parts List 6 MADE
More informationSection 13 Bosch EcoSlide Linear Sliding Carriages and Bearings
coslide Linear Sliding arriages and earings 1 Section osch coslide Linear Sliding arriages and earings The new osch coslides, along with the new slider bearings and the profile slider, provide an inexpensive
More informationDesigned for Automatic Tool Change Machines
TC Series Designed for utomatic Tool Change Machines Design The compact design, along with mentioned specifications allows for the highest performances, high speeds and long tool life Case Hardened and
More informationINSTRUCTION MANUAL PNEUDRAULIC INSTALLATION TOOL. Form HK
INSTRUCTION MANUAL 246 PNEUDRAULIC INSTALLATION TOOL HUCK U.S. PAT. 4597263 246 Form HK 825 02-10-2004 EU Declaration of Conformity Manufacturer: Huck International, Inc., Installation Systems Division,
More informationALL PITCH BLOCKS ARE $200 EACH UNLESS MARKED PESCO INC 3333 N. American St., N. Charleston, SC UPDATED AS OF 8/6/18
ALL PITCH BLOCKS ARE $200 EACH UNLESS MARKED PESCO INC 3333 N. American St., N. Charleston, SC 29418 1-800-835-6007 UPDATED AS OF 8/6/18 BALLISTIC BY MICHIGAN V-4 sizes 13-5/8 X 15 13-1/2 X 17 13-3/8 X
More informationInstruction Manual HPT25RH, HPT35RH, and HPT57RH Hydraulic Installation Tools
Instruction Manual HPT25RH, HPT35RH, and HPT57RH Hydraulic Installation Tools November 4, 2016 HK827 Makers of Huck, Marson, Recoil Brand Fasteners, Tools & Accessories 2 Contents EC Declaration of Conformity...2
More informationPRECI-FLEX. The Flexible Tool System
PRECI-FLEX The Flexible Tool System EXSYS Tool, Inc. T:800.397.9748 F:800.397.9739 P:352.588.4345 www.mazaktooling.com CONTACT INFORMATION TABLE OF CONTENTS Main Distribution for USA Mexico Canada Repair
More informationINSTRUCTION MANUAL PNEUDRAULIC INSTALLATION TOOL HK824
INSTRUCTION MANUAL 245 PNEUDRAULIC INSTALLATION TOOL HUCK U.S. PAT. 4597263 245 03-10-2006 HK824 EU Declaration of Conformity Manufacturer: Huck International, Inc., Installation Systems Division, 1 Corporate
More informationFlat Cylinders Flat-1 Square Flat-1 2.3-2.12 2.13-2.19 Flat Cylinders Flat-II Square Flat-II F02, F03, F04 (multiple power) FOP (multiple position) Flat Accessories Stainless Steel Flat-1 EF1 Cylinders
More informationService Data Vickers. Directional Controls. Pilot Operated Directional Control Valves DG5S4-10**-*-*-53 I-3624-S. Revised 9/1/86
Service Data Vickers Directional Controls Pilot Operated Directional Control Valves DG5S4-10**-*-*-53 Revised 9/1/86 I-3624-S Installation Table A DG5S4-10**-53 Does DG5S4-10**-E-53 Not DG5S4-10**-X-53
More informationHP5 BULL PIN FOR FRAME LINE APPLICATIONS 754 LBF RETRACT 60 PSI
ISO 9001 REGISTERED HP5 BULL PIN FOR FRAME LINE APPLICATIONS 754 LBF RETRACT FORCE @ 60 PSI RETRACTING LOCATING PIN WITH A 2KG SLIDE HAMMER PISTON. RAP ACTION* PROVIDES CONCENTRATED PULLING POWER. A GREATER
More information3,200 RPM Angle-Head WARNING
Model: 50046 Angle-Head Kit 54002 Mini-Dynorbital Sander 54003 Mini-Dynorbital Sander 50223 2" Disc Sander 51091 Die Grinder 53026 Drill 50047 3" Buffer 50070 Finesse Sanding Kit Parts Page Reorder No.
More informationSyntron F-450-C Electromagnetic Vibratory Feeder
Syntron F-450-C Electromagnetic Vibratory Feeder SPRING REPLACEMENT COIL AND/OR CORE REPLACEMENT OPERATION PARTS LIST Thank you for buying your equipment from FMC. This manual will help you to understand
More informationACTUATORS. F-Series Plus Cylinders Single and Double acting 9/16" to 3" bore. Technical features Medium: Filtered, lubricated or nonlubricated,
F-Series Plus ylinders Technical features Medium: Filtered, lubricated or nonlubricated, compressed air Operating pressure 200 psig (3.6 Bar) Max. Temperature range: Standard Nitrile seals: -40 F to 200
More informationHydraulic Installation Tooling (HK1173) Alcoa Fastening Systems & Rings. Nose Assembly. Installation Tool. Hose Kit.
Tool Set-up Nose ssembly Figure 3 Installation Tool Hose Kit Powerig Tool shown with electric trigger. General arrangement of fastening system components 8 TEFLON Stick - 503237 TEFLON Sealant - 620012
More information1.1/2" - Air Impact Wrench (Twin Hammer) 1" - Air Impact Wrench (Twin Hammer) 1" - Air Impact Wrench (Twin Hammer)
Impact Wrenches 13000-2 Anvil Length Bolt Capacity Overall Length Torque (5s) 12000-2 8" 3,700rpm 2,000 ft-lbs 10kg 2" 3,700rpm 2,000 ft-lbs 7.7kg 3/4" - Air Impact Wrench (Single Hammer) 1266 2" 3,700rpm
More informationVickers. Service Data. Vane Pumps. Thru Drive Vane Type Pump (F3) 25VT*(M) **A(M)2 ** * 22 * I-3154-S. Rev. 2/98
Service Data Vickers Vane Pumps Thru Drive Vane Type Pump (F3) 25VT*(M) **A(M)2 ** * 22 * Rev. 2/98 I-3154-S MODEL VTA VTB VTBP ADAPTER ADAPTER PLATE KIT 584936 941296 584922 941297 FOR BP MODELS AN ADAPTER
More informationSIOUX TOOLS SIGNATURE SERIES PRODUCT BROCHURE SPECIALTY CLINCH NUT
SIOUX TOOLS SIGNATURE SERIES PRODUCT BROCHURE SPECIALTY CLINCH NUT S E R I E S SPECIALTY SIOUX TOOLS SIGNATURE SERIES PRODUCT BROCHURE Tool Selection / Order Guide Selecting the proper tool for your clinch
More informationSeries HB Solid Brass Cylinders
Series HB Solid Brass Cylinders For General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8,, Bores Magnetic piston available to operate Aurora stainless proximity
More informationInstruction Manual. Hydraulic Installation Tool. Declaration of Conformity 2. Safety Instructions 3-4. Description 5.
Declaration of Conformity 2 Instruction Manual 507 Hydraulic Installation Tool Safety Instructions 3-4 Description 5 Specifications 5 Principle of Operation 6 Preparation for Use 7 Operating Instructions
More informationMODEL 2600 AND
INSTRUCTION MANUAL MODEL 2600 AND 2600-16 HYDRAULIC INSTALLATION TOOL Form HK 914 03-11-2004 EU Declaration of Conformity Manufacturer: Huck International Inc., Installation Systems Division, 85 Grand
More informationANGLE HEADS. Design. The compact design, along with mentioned specifications allows for the highest performances, high speeds and long tool life
TC Series Designed for utomatic Tool Change Machines Design The compact design, along with mentioned specifications allows for the highest performances, high speeds and long tool life Case Hardened and
More informationORIGINAL INSTRUCTIONS G715A. Pneumatic-hydraulic Riveter E. Warner Ave Santa Ana, CA
ORIGINAL INSTRUCTIONS G715A Pneumatic-hydraulic Riveter 1224 E. Warner Ave Santa Ana, CA 92705 www.cherryaerospace.com DESCRIPTION The Cherry G715A Pneumatic-Hydraulic Riveter is designed specifically
More informationAerospace Industry SKIN CLAMP RUNNER RIVET SHAVERS SSR6P25 SRS10P21-8 SRS10S21-8 RIVET SHAVER SKIRTS. Features: Ergonomic Handle
Aerospace Industry SKIN CLAMP RUNNER Ergonomic Handle Power Source: Compressed air Hose Size: 3/8" (10 mm) Air Inlet Size: 1/4 in (NPT) SSR6P25 Free Weight Length Side To Center Air Consumption Rpm lb
More information