Uni-Flow Filter Driers
|
|
|
- Cody Wilkins
- 5 years ago
- Views:
Transcription
1 STNDRD Uni-Flow Driers The filter driers of series DTG are used in refrigeration system with unidirectional flow to absorb moisture and acid in the system and to filter out the impurities. FETURES HIGH EFFICIENT IN MOISTURE SORPTION, FILTERING IMPURITY, CID, PINT REMINS ND MUD REMOVL HYRID DESICCNT DURLE ND SOLID FILTER CORES FILTERING FINENESS: 20μm CORROSION RESISTNT PINTING SURVIVES SLT SPRY TEST OF 500 HOURS CONNECTION TYPE: FLRE OR SOLDER GENERL SPECIFICTIONS pplicable for all common HCFC, HFC, HC, HFO¹ ) refrigerants such as: R22, R34a, R404, R407C, R40, R507, R407/F, R290² ), R234ze² ), R234yf² ), R32² ), R448/R449, R452, R450/R53 mbient temperature min./max.: -30 C / +55 C Medium temperature TS min./max.: -30 C / +20 C Max. operating pressure PS max.: 4,83 MPa (48,3 bar) PSI Installation position: - Flow direction corresponds to the arrow - Preferably installed in liquid line Certifications: UL/CS and PED declaration TECNHICL PRMETERS Desiccant Selection Table Medium Type 80% 3Å desiccant and 20% active alumina 00% 3Å desiccant HFC pplicable pplicable Refrigerant HCFC pplicable pplicable HC pplicable pplicable Oil 3) Pure POE or PG pplicable pplicable Mineral oil or pplicable pplicable POE or PG with additive Not applicable pplicable ) Please contact Sanhua representative regarding applications with HFO 2) For flammable refrigerants only solder versions with tube connections below 25 mm ( inch) can be used 3) When the systems use oil with additive, it is not recommended to use a core with alumina
2 Designation Legend Product Code DTG Core F Drier Series Indicates unidirectional filter drier Structure and Material Solid core, 00%3Å desiccant Solid core, 80% 3Å desiccant and 20% active alumina Internal Volume Expressed in [ inch³ ] Expressed in [ cm³ ] Connection Size Pos. 5 shows "0": Solder Pos. 5 shows "4": SE Flare 02 /4 /4 25 5/6-03 3/8 3/8 04 /2 /2 05 5/8 5/8 06 3/4 3/4 07 7/8 7/8 09 /8 - Connection Size Pos. 5 shows "": Solder 06 6 (08) * (5/6 version can be used e.g. DTG ) (6) * (5/8 version can be used e.g. DTG ) (22) * (7/8 version can be used e.g. DTG-6 070) Pipe Connection Type 0 Solder with inch connections * Solder with metric connections 4 SE flare connections Version Number Description 90 Standard product * Solder connections which fit to metric and inch are marked with inch product codes e.g. 8, 6 and 22 mm
3 MODEL DESIGNTION EXMPLE Position Number ccording to Designation Legend DTG Unidirectional filter drier DTG Solid filter core with 00% 3Å desiccant DTG inch³ internal volume DTG When Pos. 5 is : connection size 6mm DTG Solder connection metric DTG Standard product GENERL CHRCTERISTICS OF DTG- FILTER - FLRE CONNECTION Nominal Volume Connection Dimensions & ) SE Flare ØD [ g ] PED Category ² ) DTG032 DTG / rt. 4.3 DTG033 DTG / rt. 4.3 DTG034 DTG / rt. 4.3 DTG052 DTG / rt. 4.3 DTG053 DTG / rt. 4.3 DTG082 DTG / rt. 4.3 DTG083 DTG / rt. 4.3 DTG084 DTG / rt. 4.3 DTG62 DTG / rt. 4.3 DTG63 DTG / rt. 4.3 DTG64 DTG / rt. 4.3 DTG65 DTG / rt. 4.3 DTG66 DTG / rt. 4.3 DTG303 DTG / rt. 4.3 DTG304 DTG / rt. 4.3 DTG305 DTG / rt. 4.3 DTG306 DTG / rt. 4.3 DTG053 DTG / rt. 4.3 DTG44 DTG / rt. 4.3 DTG45 DTG / rt. 4.3 vailable also as industrial package. Contact Sanhua for more details. ) Dimensions are rounded up to integral mm 2) PED Directive 204/68/EU
4 GENERL CHRCTERISTICS OF DTG- FILTER - SOLDER CONNECTION Connection Dimensions & ) [ mm ] [ imm ] Nominal Volumen Solder DØ [g] PED Category² ) DTG032s DTG DTG / rt. 4.3 DTG0325s DTG DTG / rt. 4.3 DTG033s DTG DTG / rt. 4.3 DTG034s DTG DTG / rt. 4.3 DTG052s DTG DTG / rt. 4.3 DTG0525s DTG DTG / rt. 4.3 DTG053s DTG DTG / rt. 4.3 DTG054s DTG DTG / rt. 4.3 DTG055s DTG DTG / rt. 4.3 DTG082s DTG DTG / rt. 4.3 DTG0825s DTG DTG / rt. 4.3 DTG083s DTG DTG / rt. 4.3 DTG084s DTG DTG / rt. 4.3 DTG085s DTG DTG / rt. 4.3 DTG62s DTG DTG / rt. 4.3 DTG625s DTG DTG / rt. 4.3 DTG63s DTG DTG / rt. 4.3 DTG64s DTG DTG / rt. 4.3 DTG65s DTG DTG / rt. 4.3 DTG66s DTG / rt. 4.3 DTG67s DTG DTG / rt. 4.3 DTG303s DTG DTG / rt. 4.3 DTG304s DTG DTG / rt. 4.3 DTG305s DTG DTG / rt. 4.3 DTG306s DTG / rt. 4.3
5 GENERL CHRCTERISTICS OF DTG- FILTER - SOLDER CONNECTION Connection Dimensions & ) [ mm ] [ imm ] Nominal Volumen Solder DØ [g] PED Category² ) DTG307s DTG DTG / rt. 4.3 DTG309s DTG DTG / rt. 4.3 DTG44s DTG DTG / rt. 4.3 DTG45s DTG DTG / rt. 4.3 DTG47s DTG DTG / rt. 4.3 DTG49s DTG DTG / rt. 4.3 DTG757s DTG DTG / rt. 4.3 DTG759s DTG DTG / rt. 4.3 vailable also as industrial package. Contact Sanhua for more details. ) Dimensions are rounded up to integral mm 2) PED Directive 204/68/EU GENERL CHRCTERISTICS OF DTG-F FILTER - FLRE CONNECTION Nominal Volume Connection Dimensions & ) SE Flare ØD [ g ] PED Category ² ) DTGF032 DTG-F / rt. 4.3 DTGF033 DTG-F / rt. 4.3 DTGF034 DTG-F / rt. 4.3 DTGF052 DTG-F / rt. 4.3 DTGF053 DTG-F / rt. 4.3 DTGF082 DTG-F / rt. 4.3 DTGF083 DTG-F / rt. 4.3 DTGF084 DTG-F / rt. 4.3 DTGF62 DTG-F / rt. 4.3 DTGF63 DTG-F / rt. 4.3
6 GENERL CHRCTERISTICS OF DTG-F FILTER - FLRE CONNECTION Nominal Volume Connection Dimensions & ) SE Flare ØD [ g ] PED Category ² ) DTGF64 DTG-F / rt. 4.3 DTGF65 DTG-F / rt. 4.3 DTGF66 DTG-F / rt. 4.3 DTGF303 DTG-F / rt. 4.3 DTGF304 DTG-F / rt. 4.3 DTGF305 DTG-F / rt. 4.3 DTGF306 DTG-F / rt. 4.3 DTGF307 DTG-F / rt. 4.3 DTGF44 DTG-F / rt. 4.3 DTGF44 DTG-F / rt. 4.3 vailable also as industrial package. Contact Sanhua for more details. ) Delivery time on request 2) Dimensions are rounded up to integral mm 3) PED Directive 206/68/EU GENERL CHRCTERISTICS OF DTG-F FILTER - SOLDER CONNECTION Connection Dimensions & ) [ mm ] [ imm ] Nominal Volumen Solder DØ [g] PED Category² ) DTGF032s DTG-F DTG-F / rt. 4.3 DTGF0325s DTG-F DTG-F / rt. 4.3 DTGF033s DTG-F DTG-F / rt. 4.3 DTGF034s DTG-F DTG-F / rt. 4.3 DTGF052s DTG-F DTG-F / rt. 4.3 DTGF0525s DTG-F DTG-F / rt. 4.3 DTGF053s DTG-F DTG-F / rt. 4.3 DTGF054s DTG-F DTG-F / rt. 4.3 DTGF055s DTG-F DTG-F / rt. 4.3
7 GENERL CHRCTERISTICS OF DTG-F FILTER - SOLDER CONNECTION Connection Dimensions & ) [ mm ] [ imm ] Nominal Volumen Solder DØ [g] PED Category² ) DTGF082s DTG-F DTG-F / rt. 4.3 DTGF0825s DTG-F DTG-F / rt. 4.3 DTGF083s DTG-F DTG-F / rt. 4.3 DTGF084s DTG-F DTG-F / rt. 4.3 DTGF085s DTG-F DTG-F / rt. 4.3 DTGF62s DTG-F DTG-F / rt. 4.3 DTGF625s DTG-F DTG-F / rt. 4.3 DTGF63s DTG-F DTG-F / rt. 4.3 DTGF64s DTG-F DTG-F / rt. 4.3 DTGF65s DTG-F DTG-F / rt. 4.3 DTGF66s DTG-F / rt. 4.3 DTGF67s DTG-F DTG-F / rt. 4.3 DTGF303s DTG-F DTG-F / rt. 4.3 DTGF304s DTG-F DTG-F / rt. 4.3 DTGF305s DTG-F DTG-F / rt. 4.3 DTGF306s DTG-F / rt. 4.3 DTGF307s DTG-F DTG-F / rt. 4.3 DTGF309s DTG-F DTG-F / rt. 4.3 DTGF44s DTG-F DTG-F / rt. 4.3 DTGF45s DTG-F DTG-F / rt. 4.3 DTGF47s DTG-F DTG-F / rt. 4.3 DTGF49s DTG-F DTG-F / rt. 4.3 DTGF757s DTG-F DTG-F / rt. 4.3 DTGF759s DTG-F DTG-F / rt. 4.3 DTGF055s DTG-F DTG-F / rt. 4.3 DTGF0325s DTG-F DTG-F / rt. 4.3 DTGF033s DTG-F DTG-F / rt. 4.3 DTGF034s DTG-F DTG-F / rt. 4.3 DTGF052s DTG-F DTG-F / rt. 4.3 DTGF0525s DTG-F DTG-F / rt. 4.3 DTGF053s DTG-F DTG-F / rt. 4.3 DTGF054s DTG-F DTG-F / rt. 4.3 DTGF055s DTG-F DTG-F / rt. 4.3 vailable also as industrial package. Contact Sanhua for more details. ) Delivery time on request 2) Dimensions are rounded up to integral mm 3) PED Directive 204/68/EU
8 SELECTION TLE Capacity ) [ kw ] Moisture bsorption (gram H 2 O) R34a R404 R507 R22 R407C 2) R40 R22 R34a R404 R407C 2) R507 R40 75 F 25 F 75 F 25 F 75 F 25 F 75 F 25 F 23,9 C 5,7 C 23,9 C 5,7 C 23,9 C 5,7 C 23,9 C 5,7 C DTG032s 7,7 6,7 8, 8, 8, 4,2 3,8 5,7 3,4 3,4 3, 3,7 3,4 DTG032 7,7 6,7 8, 8, 8, 4,2 3,8 5,7 3,4 3,4 3, 3,7 3,4 DTG0325s 9,5 6,7 9,5 9,5 9,8 4,2 3,8 5,7 3,4 3,4 3, 3,7 3,4 DTG033s 4,4 0,6 4,8 4,8 4,8 4,2 3,8 5,7 3,4 3,4 3, 3,7 3,4 DTG033 4,4 0,6 4,8 4,8 4,8 4,2 3,8 5,7 3,4 3,4 3, 3,7 3,4 DTG034s 24,6 7,2 25,0 24,6 25,0 4,2 3,8 5,7 3,4 3,4 3, 3,7 3,4 DTG034 24,6 7,2 25,0 24,6 25,0 4,2 3,8 5,7 3,4 3,4 3, 3,7 3,4 DTG052s 8,4 6,0 8,4 8,4 8,4,6 0,9 0,9 8,9 0,9 9,5,4 9,7 DTG052 8,4 6,0 8,4 8,4 8,4,6 0,9 0,9 8,9 0,9 9,5,4 9,7 DTG0525s 0,9 7,4 0,9 0,9,3,6 0,9 0,9 8,9 0,9 9,5,4 9,7 DTG053s 23,9 6,9 24,3 23,9 24,6,6 0,9 0,9 8,9 0,9 9,5,4 9,7 DTG053 23,9 6,9 24,3 23,9 24,6,6 0,9 0,9 8,9 0,9 9,5,4 9,7 DTG054s 25,3 7,9 25,7 25,7 26,0,6 0,9 0,9 8,9 0,9 9,5,4 9,7 DTG055s 34,8 24,6 35,5 35,2 35,9,6 0,9 0,9 8,9 0,9 9,5,4 9,7 DTG082s 8,4 6,0 8,4 8,4 8,4 4,8 4,2 6,3 3,4 4,8 3,0 5,5 3, DTG082 8,4 6,0 8,4 8,4 8,4 4,8 4,2 6,3 3,4 4,8 3,0 5,5 3, DTG0825s,6 8, 2,0,6 2,0 4,8 4,2 6,3 3,4 4,8 3,0 5,5 3, DTG-083s 25,0 7,6 25,3 25,0 25,7 4,8 4,2 6,3 3,4 4,8 3,0 5,5 3, DTG083 25,0 7,6 25,3 25,0 25,7 4,8 4,2 6,3 3,4 4,8 3,0 5,5 3, DTG084s 30,6 2,5 3,3 30,9 3,7 4,8 4,2 6,3 3,4 4,8 3,0 5,5 3, DTG084 30,6 2,5 3,3 30,9 3,7 4,8 4,2 6,3 3,4 4,8 3,0 5,5 3, DTG085s 44,7 3,7 45,7 45,4 46, 4,8 4,2 6,3 3,4 4,8 3,0 5,5 3, DTG62s 0,9 7,7,3 0,9,3 20,6 9,5 33,2 8,3 20,6 7,6 20,9 7,7 DTG62 0,9 7,7,3 0,9,3 20,6 9,5 33,2 8,3 20,6 7,6 20,9 7,7 DTG625s,6 8, 2,0,6 2,0 20,6 9,5 33,2 8,3 20,6 7,6 20,9 7,7 DTG63s 25,7 7,9 26,0 26,0 26,4 20,6 9,5 33,2 8,3 20,6 7,6 20,9 7,7 DTG63 25,7 7,9 26,0 26,0 26,4 20,6 9,5 33,2 8,3 20,6 7,6 20,9 7,7 DTG64s 32,4 22,9 33, 32,7 33,8 20,6 9,5 33,2 8,3 20,6 7,6 20,9 7,7 DTG64 32,4 22,9 33, 32,7 33,8 20,6 9,5 33,2 8,3 20,6 7,6 20,9 7,7 DTG65s 43,3 30,6 43,6 43,6 44,3 20,6 9,5 33,2 8,3 20,6 7,6 20,9 7,7 DTG65 43,3 30,6 43,6 43,6 44,3 20,6 9,5 33,2 8,3 20,6 7,6 20,9 7,7 DTG66s 46,4 32,7 47, 46,8 47,8 20,6 9,5 33,2 8,3 20,6 7,6 20,9 7,7 DTG66 46,4 32,7 47, 46,8 47,8 20,6 9,5 33,2 8,3 20,6 7,6 20,9 7,7 DTG67s 47, 33,4 48,2 47,8 48,5 20,6 9,5 33,2 8,3 20,6 7,6 20,9 7,7 DTG303s 25,7 7,9 26,0 26,0 26,4 5,4 48,7 83,4 5,4 5,3 43,7 52, 44, DTG303 25,7 7,9 26,0 26,0 26,4 5,4 48,7 83,4 5,4 5,3 43,7 52, 44, DTG304s 33, 23,2 33,8 33,4 34, 5,4 48,7 83,4 5,4 5,3 43,7 52, 44, DTG304 33, 23,2 33,8 33,4 34, 5,4 48,7 83,4 5,4 5,3 43,7 52, 44,
9 SELECTION TLE Capacity ) [ kw ] Moisture bsorption (gram H 2 O) R34a R404 R507 R22 R407C 2) R40 R22 R34a R404 R407C 2) R507 R40 75 F 25 F 75 F 25 F 75 F 25 F 75 F 25 F 23,9 C 5,7 C 23,9 C 5,7 C 23,9 C 5,7 C 23,9 C 5,7 C DTG305s 45,7 32,0 46,4 46, 46,8 5,4 48,7 83,4 5,4 5,3 43,7 52, 44, DTG305 45,7 32,0 46,4 46, 46,8 5,4 48,7 83,4 5,4 5,3 43,7 52, 44, DTG306s 62,6 44,0 63,7 63,3 64,4 5,4 48,7 83,4 5,4 5,3 43,7 52, 44, DTG306 62,6 44,0 63,7 63,3 64,4 5,4 48,7 83,4 5,4 5,3 43,7 52, 44, DTG307s 63,0 44,3 64,0 63,7 64,7 5,4 48,7 83,4 5,4 5,3 43,7 52, 44, DTG307 63,0 44,3 64,0 63,7 64,7 5,4 48,7 83,4 5,4 5,3 43,7 52, 44, DTG309s 70,7 52, 75,3 74,6 76,0 5,4 48,7 83,4 5,4 5,3 43,7 52, 44, ) the above data is based on filter driers with inch connections and clean system at ideal conditions; with impurities accumulated in the filter, the capacity may decrease 2) R407C capacity is based on dew point conditions SELECTION FORMULS Driers for liquid line are manufactured in compliance with RI Standard 70. Maximum flow rate of liquid refrigerant at a differential pressure of 0,07bar (psi) is indicated by kw (ton) which is based on the temperature of liquid refrigerant 30 C (86 F), the evaporating temperature of -5 C (5 F) and the following mass flow: 0,40 kg/min/kw (3. lb/min/ton) R34a 0,53 kg/min/kw (4. lb/min/ton) R404, R507 0,39 kg/min/kw (3.0 lb/min/ton) R22, R407C 0,36 kg/min/kw (2.8 lb/min/ton) R40 Data on water absorption is based on the following EPD (method: SHRE Standard 63.): 60ppm R22 50ppm R34a 50ppm R404 50ppm R407C 50ppm R40 50ppm R507
PRODUCT DATA DTG SERIES Unidirectional Filter Driers
The series DTG unidirectional filter-driers are used to protect air conditioning and refrigeration systems from moisture and contamination. FEATURES HIGHLY EFFICIENT IN MOISTURE AND CONTAMINATION REMOVAL
HANDBOOK REFRIGERATING SYSTEM PROTECTORS. Ed REFRIGERATING SYSTEM PROTECTORS DP-ED 01/ ENG 1
HANDBOOK Ed. 2017 DP-ED 01/2017 - ENG 1 CHAPTER 3 Hermetic filter driers CERTIFIED BY UNDERWRITERS LABORATORIES INC. For refrigeration plants that use HCFC, HFC or HFO refrigerants APPLICATIONS The filters
AIR CONDITIONING COMMERCIAL REFRIGERATION HEAT PUMP STANDARD PRODUCT
AIR CONDITIONING COMMERCIAL REFRIGERATION HEAT PUMP STANDARD PRODUCT SANHUA Strive for perfection, Pursuit of excellence Sanhua is a leading HVAC&R manufacturer of controls and components with a global
ELIMINATOR Hermetic bi-flow filter drier Types DMB and DCB
Data sheet ELIMINATOR Hermetic bi-flow filter drier s DMB and DCB Hermetic bi-flow filter driers, types DMB and DCB are for use in liquid lines on heat pumps. Hermetic bi-flow filter driers have built-in
ELIMINATOR Hermetic filter drier Types DML and DCL
MAKING MODERN LIVING POSSIBLE Data sheet ELIMINATOR Hermetic filter drier Types DML and DCL All ELIMINATOR driers have a solid core with binding material held to an absolute minimum. There are two types
Thermostatic Expansion Valve
STANDARD Thermostatic Expansion Valve RFKH series thermostatic expansion valves are used to adjust mass flow of refrigerant into the evaporator while controlling the refrigerant s superheat at the outlet
Eliminator Liquid line filter driers, type DCL and DML
Eliminator Liquid line filter driers, type DCL and DML Flare connection Solder connection (copper) REFRIGERATION AND AIR CONDITIONING Technical leaflet Eliminator Liquid line filter driers, type DCL and
Replaceable solid cores filter driers type CSR
Replaceable solid cores filter driers type CSR N of cores Nominal volume [cm 3 ] (in 3 ) DIMENSIONS AND TECHNICAL CHARACTERISTICS Filtering surface ODS Ø [in.] [mm] ØD1 ØD2 H1 P E H K CSR485 5/8" 16 148
ELIMINATOR Hermetic filter drier Types DML and DCL
Data sheet ELIMINATOR Hermetic filter drier s DML and DCL All ELIMINATOR driers have a solid core with binding material held to an absolute minimum. There are two types of ELIMINATOR cores. DML driers
ELIMINATOR Hermetic bi-flow filter drier Types DMB and DCB
Data sheet ELIMINATOR Hermetic bi-flow filter drier s DMB and DCB Hermetic bi-flow filter driers, types DMB and DCB are for use in liquid lines on heat pumps. Hermetic bi-flow filter driers have built-in
ELIMINATOR Hermetic filter drier Types DCL and DML
Data sheet ELIMINATOR Hermetic filter drier s DCL and DML All ELIMINATOR driers have a solid core with binding material held to an absolute minimum. There are two types of ELIMINATOR cores. DML driers
MAKING MODERN LIVING POSSIBLE. Eliminator Liquid line filter driers, DCL and DML. Flare connection. Solder connection (copper) Technical brochure
MAKING MODERN LIVING POSSIBLE Eliminator Liquid line filter driers, DCL and DML Flare connection Solder connection (copper) Technical brochure Contents Page Introduction........................................................................................
Thermostatic Expansion Valve
STANDARD Thermostatic Expansion Valve RFGD series thermostatic expansion valves are used to adjust mass flow of refrigerant into the evaporator while controlling the refrigerant s superheat at the outlet
Technical brochure Eliminator filter drier DCR - with replaceable solid core
MAKING MODERN LIVING POSSIBLE Technical brochure Eliminator filter drier DCR - with replaceable solid core www.danfoss.com Contents Page Introduction...3 Features...3 Approvals...3 Technical data...4 of
FDB Filter Drier. FDB Filter Drier. Technical Data
Technical Data ALCO FDB is a hermetic filter-drier in compacted bead style for use on liquid line. Features Compacted bead style (spring loaded) Hermetic design Rugged steel shells Cushioned flow for non-turbulent
FDB Filter Drier. Alco Controls. FDB Filter Drier. Features. Introduction. Moisture removal capability. Construction
ALCO FDB is a hermetic filter-drier in compacted bead style for use on liquid line. Features Compacted bead style (spring loaded) Hermetic design Rugged steel shells Corrosion resistant epoxy paint Solder
DCY. Anti-acid filter driers Refrigeration & Climate Components Solutions. n Applications
1.12 n Applications Filtering and drying of refrigerants and acid neutralization for liquid lines of refrigerating and air conditioning installations. n Functional features Products are compatible with
ADK Filter Drier. Alco Controls. Filter Drier. Features
ADK is a hermetic filter-drier with internal solid block for use on liquid line. Features Solid block Hermetic design Rugged steel shells Corrosion resistant epoxy paint Solder connection made from copper
HANDBOOK SOLENOID VALVES. Ed SOLENOID VALVES VS-ED 01/ ENG 1
HANDBOOK Ed. 2017 VS-ED 01/2017 - ENG 1 2 VS-ED 01/2017 - ENG TABLE OF CONTENTS CHAPTER 1 CHAPTER 2 CHAPTER 3 CHAPTER 4 CHAPTER 5 CHAPTER 6 CHAPTER 7 CHAPTER 8 CHAPTER 9 CHAPTER 10 CHAPTER 11 CHAPTER 12
BFK Bi-flow Filter Drier
ALCO is a hermetic Bi-flow filter-drier in solid block style for use on liquid line in reversible refrigeration systems such as heat pump units. Features Solid block style Integrated check valves insure
Crankcase pressure regulator Type KVL
MAKING MODERN LIVING POSSIBLE Data sheet Crankcase pressure regulator KVL Crankcase pressure regulator type KVL is fitted in the suction line ahead of the compressor. KVL protects the compressor motor
HANDBOOK SOLENOID VALVES. Ed SOLENOID VALVES VS-ED 01/ ENG 1
HANDBOOK Ed. 2017 VS-ED 01/2017 - ENG 1 CHAPTER 3 NORMALLY-CLOSED PULSE FOR REFRIGERATION PLANTS THAT USE HFC OR HFO REFRIGERANTS APPLICATION The solenoid valves illustrated in this chapter are designed
HANDBOOK PIPING ACCESSORIES. Ed PIPING ACCESSORIES AT-ED 01/ ENG 1
HANDBOOK Ed. 2017 AT-ED 01/2017 - ENG 1 CHAPTER 3 ACCESS FITTINGS AND VALVE CORES FOR REFRIGERATION PLANTS THAT USE HCFC, HFC, HC, HFO, OR R744 REFRIGERANTS APPLICATIONS The access fittings illustrated
Crankcase pressure regulator Type KVL
Data sheet Crankcase pressure regulator KVL Crankcase pressure regulator type KVL is fitted in the suction line ahead of the compressor. KVL protects the compressor motor against overload during start-up
Crankcase pressure regulator Type KVL
Data sheet Crankcase KVL KVL crankcase are used to protect the compressor motor against overload experienced during startup after long off periods or just after defrost periods. They are installed in the
HANDBOOK REGULATOR VALVES. Ed REGULATOR VALVES RP-ED 01/ ENG 1
HANDBOOK Ed. 2017 RP-ED 01/2017 - ENG 1 CHAPTER 2 CRANKCASE PRESSURE REGULATORS For refrigeration plants that use HCFC or HFC refrigerants shutter continues to open, until the stroke limit is reached and
HANDBOOK VALVES. Ed VALVES VR-ED 02/ ENG 1
HANDBOOK Ed. 2017 1 2 INDEX CHAPTER 1 CHAPTER 2 CHAPTER 3 CHAPTER 4 CHAPTER 5 CHAPTER 6 CHAPTER 7 CHAPTER 8 CHAPTER 9 CHAPTER 10 CHAPTER 11 CHAPTER 12 CHAPTER 13 CHAPTER 14 Valves with screw shutter For
Sight glass (High pressure) Type SGP X, SGP I, SGP N, SGP RX, SGP RI and SGP RN
Sight glass (igh pressure) SGP X, SGP I, SGP N, SGP RX, SGP RI and SGP RN SGP are sight glasses for high pressure applications (Max. Working Pressure 52 bar / 754 psig). SGP is available with flare, solder
Electrical Control Valves Series EX4, EX5, EX6, EX7 & EX8
Electrical Control s Series EX4, EX5, EX6, EX7 & EX8 Features Multifunction as expansion valve, hot gas bypass, suction gas throttling, head pressure, liquid level actuator etc. Fully hermetic design (no
HANDBOOK VALVES. Ed VALVES VR-ED 02/ ENG 1
HANDBOOK Ed. 2017 1 CHAPTER 1 WITH SCREW SHUTTER FOR REFRIGERATION PLANTS THAT USE HCFC, HFC OR HFO REFRIGERANTS APPLICATIONS All valves illustrated in this chapter are designed for installation on commercial
FILTER DRIERS - SPORLAN
FILTER DRIERS - SPORLAN The universal acceptance of the Catch-All Filter-Drier is due to its unique moulded porous core, consisting of a blend of highly effective desiccants. The quality features built
Hot gas bypass regulator type CPCE Liquid gas mixer type LG (accessory)
MAKING MODERN LIVING POSSIBLE Data sheet Hot gas bypass regulator type CPCE Liquid gas mixer type LG (accessory) A CPCE hot gas bypass regulator is used to adapt compressor capacity to actual evaporator
Anti-acid filter driers DCY
1.1 n Applications Filtering and drying of refrigerants and acid neutralization for liquid lines of refrigerating and air conditioning installations. n Functional features o Products are compatible with
SOLENOID VALVES FOR REFRIGERATING SYSTEMS
SOLENOID VALVES 17 SOLENOID VALVES FOR REFRIGERATING SYSTEMS APPLICATIONS The solenoid valves, shown in this chapter, are classified Pressure accessories in the sense of the Pressure Equipment Directive
Electrical Control Valves
172 Electrical Control Valves Electrical Control Valves Electrical Control Valve Technology Thermostatic expansion valves and mechanical regulator valves have been used in the refrigeration and air conditioning
Product Guide for HFO / HFO Blends. R448A/R449A R450A/R513A R1234ze. R134a R407A/F R404A/507 R12/502
Product Guide 2016 for HFO / HFO Blends R448A/R449A R450A/R513A R1234ze R134a R407A/F R404A/507 R12/502 Preface Many end-users, equipment and compressor manufacturers are investigating ways to minimize
REFRIGERANT RECOVERY PRODUCTS
REFRIGERANT RECOVERY PRODUCTS PARKER REFRIGERANT RECOVERY PRODUCT Parker provides a large selection of components for recovery, recycle and reclaim machines, protecting them from the many types of contaminants
FILTER DRIERS PART NUMBER SIGNIFICANCE LIQUID LINE FILTER DRIERS TOTALINE LIQUID LINE FILTER DRIER PHYSICAL DATA DIMENSIONS
TOTALINE LIQUID LINE FILTER DRIERS P502-8 SERIES P PART NUMBER SIGNIFICANCE P353 FEATURES Compacted bead filter drier Universal Replacement CFC, HCFC, HFC refrigerants Filtration first for more effective
Product Guide for HFO / HFO Blends. R448A/R449A R450A/R513A R1234ze. R134a R407A/F R404A/507 R12/502
Product Guide 2016 for HFO / HFO Blends R448A/R449A R450A/R513A R1234ze R134a R407A/F R404A/507 R12/502 Preface Many end-users, equipment and compressor manufacturers are investigating ways to minimize
EMERSON CLIMATE TECHNOLOGIES
STAS STEEL TAKE-APART FILTER DRIER APPLICATION Replaceable core filter-drier for CFC, HCFC and HFC refrigerants for use in large commercial air conditioning and refrigeration systems. FEATURES Unique internal
HANDBOOK SOLENOID VALVES. Ed SOLENOID VALVES VS-ED 01/ ENG 1
HANDBOOK Ed. 2017 1 CHAPTER 5 NORMALLY-CLOSED FOR REFRIGERATION PLANTS THAT USE HC REFRIGERANTS APPLICATION The solenoid valves illustrated in this chapter have been developed by Castel for all those refrigeration
June 2015 / BULLETIN Catch-All. Liquid & Suction Line Filter-Driers FILTER-DRIERS. It s the CORE that counts!
June 2015 / BULLETIN 40-10 Catch-All Liquid & Suction Line Filter-Driers FILTER-DRIERS It s the CORE that counts! Page 2 Bulletin 40-10 Table of Contents The Sporlan Catch-All Liquid and Suction Line Filter-Driers
R-22 R-404A/R-502/R-507A R-12/
EMERSON CLIMATE TECHNOLOGIES-System Protectors Recommended System Tonnage Take-Apart Liquid Line Filter Driers in Tons* Description, Low Temp. & Commercial Installations Air Conditioning Field Replacement
QUICK SELECTION GUIDE
QUICK SELECTION GUIE HERMETIC FILTER RIERS TYPE FILTER RIER PGE RECOMMENE USE FUNCTION Liquid EK 209 CFC, HCFC, HFC Premium Universal Replacement Liquid K 22 CFC, HCFC High cid and Water Removal Liquid
PRODUCT DATA HDF SERIES Solenoid Valve
HDF series solenoid valves are piston type pilot operated solenoid valves, and are designed for use in all air conditioning and refrigeration systems. The HDF valves can tolerate discharge line temperatures
Alco Controls. Components for the Refrigeration Industry. Product Selection Catalogue
Alco Controls Components for the Refrigeration Industry Product Selection Catalogue Note: The components listed in this catalogue are not released for use with caustic, poisonous or flammable substances.
EVALUATION SUBJECT: >B< MAXIPRO PRESS FITTINGS FOR AC AND REFRIGERATION APPLICATION
ICC-ES Report PMG-1440 Issued 09/2017 This report is subject to renewal 09/2018 EVALUATION SUBJECT: >B< MAXIPRO PRESS FITTINGS FOR AC AND REFRIGERATION APPLICATION DIVISION: 23 00 00 HEATING, VENTILATING
Oil separator Type OUB
ata sheet Oil separator OUB Oil separator type OUB is for use in all refrigeration plants where the compressor lubricating oil must be returned directly to the compressor oil sump under all operating conditions.
Capacity regulators (hot gas bypass) PMC and CVC
MAKING MODERN LIVING POSSIBLE Technical brochure Capacity regulators (hot gas bypass) PMC and CVC The PMC and CVC is used for capacity regulation in refrigeration, freezing and air conditioning plant for
MAKING MODERN LIVING POSSIBLE. Solenoid valves Type EVU for fluorinated refrigerants REFRIGERATION AND AIR CONDITIONING.
MAKING MODERN LIVING POSSIBLE Solenoid valves EVU for fluorinated refrigerants REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction... 3 Features... 3 Approvals... 3 Technical
EX4 / EX5 / EX6 / EX7 / EX8 Electrical Control Valves
ALCO Controls EX4 / EX5 / EX6 / EX7 / EX8 are stepper motor driven valves for precise control of refrigerant mass flow in air conditioning, refrigeration, heat pumps, close control, and industrial process
Parker TEV Model Visual
PARKER - THERMOSTATIC EXPANSION VALVES TXV MODEL NUMBER SELECTION Parker TEV Model Visual N Series TEV C(E) Series TEV SC(E) Series TEV Applications: Applications: Applications: Low Profile Coolers, Rail
TAKE-A-PART SHELLS TOTALINE LIQUID & SUCTION LINE REPLACEABLE SHELLS P505-8 SERIES PART NUMBER SIGNIFICANCE
TOTALINE LIQUID & SUCTION LINE REPLACEABLE SHELLS P505-8 SERIES P PART NUMBER SIGNIFICANCE P360 SIZE (in 1/8 ) 505-8 TOTALINE FILTER DRIER SHELLS APPLICATION Totaline Replaceable Core Shells offer the
Pulse Width Modulation Valves. Models SPW-0 thru -7
November 2017 Bulletin / Bulletin 30-30 30-30 Page 1 Pulse Width Modulation s Models SPW-0 thru -7 Page 2 Bulletin 30-30 Pulse Width Modulation s For Refrigerant Flow Control in Direct Expansion HFC, HCFC
Refrigeration K-211. Replacement Parts. Chillers, Condensers. Compressors, Motors. Electrical. Components. Heating. Indoor Air Quality.
EMERSON CLIMATE TECHNOLOGIES-Oil Controls High Efficiency Centrifugal Oil Separator The High Efficiency Centrifugal Oil Separator is used in ultra-low temperature systems with long refrigerant lines or
50Hz ZB76KCE-TFD R404A Dew Point
50Hz ZB76KCE-TFD R404A Dew Point 60 50 40 30 20 10-25 -20-15 -10-5 0 5 10 15 Minimum evaporating temp. with: 10K Suction Superheat 20 C Suction Gas Return Suction Return Temperature 20,0 C Evaporating
HANDBOOK EXPANSION VALVES. Ed EXPANSION VALVES VE-ED 01/ ENG 1
HANDBOOK Ed. 2017 VE-ED 01/2017 - ENG 1 CHAPTER 12 STEP-MOTOR CERTIFIED BY UNDERWRITERS LABORATORIES INC. FOR REFRIGERATION PLANTS THAT USE HCFC, HFC OR HFO REFRIGERANTS belonging to Group 2, as defined
Float valve Type HFI. Data sheet
Data sheet Float valve ype is a high pressure float valve with internal liquid measuring device. he float valve is designed for direct flange mounting or welding on to plate heat exchanger type condensers,
Cartridge pressure switch Type CB
Data sheet Cartridge pressure switch Type CB Pressure controls CB series are compact disc type pressure switches with fixed set-points for long-standing use in refrigeration and air conditioning systems.
Pressure operated water valve Type WVFX and WVS
Data sheet Pressure operated water valve WVFX and WVS Pressure operated water valves types WVFX and WVS are used for regulating the flow of water in refrigeration plants with water-cooled condensers. The
Sporlan V-Series Ruby Seat Solenoid Valves
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Sporlan V-Series Ruby Seat Solenoid Valves Bulletin 30-10-8, October
HCYBF. Replaceable core oil filter shells Refrigeration & Climate Components Solutions. n Applications
Refrigeration & limate omponents Solutions 46.1 n Applications Oil filtering on the oil return line to the compressor sumps of high capacity refrigerating and air conditioning installations. These filters
SOLENOID VALVES FOR REFRIGERATING SYSTEMS
SOLENOID VALVES 17 SOLENOID VALVES FO EFIGEATING SYSTEMS APPLICATIONS The solenoid valves, shown in this chapter, are classified Pressure accessories in the sense of the Pressure Equipment Directive 97/23/EC,
CHECK VALVES. Flare to Flare. Solder to Solder. Solder to Solder - Extended Ends. Shipped loosely assembled.
CHECK VLVES MUELLER CHECK VLVES DESIGN FETURES 1. Soft neoprene seat provides positive seal against reverse flow. 2. Four space tabs maintain washer/seat alignment and guide the seat disc for smooth operation.
Automatic controls catalogue E.N. 4
TV series Technical parameter Max. body temperature: 80 Max. bulb sensing temperature: 60 About R134a,R22,R407C,R404A/R507 system: Max. working pressure: 3 MPa Max. testing pressure: 3.3 MPa About R410A
Shut-off valves in stainless steel SVA-S SS
Technical brochure Shut-off valves in stainless steel In certain specific areas such as outdoor applications and corrosive atmospheres, such as coastal installations, there is a need for high surface protection
Thermostatic Expansion
Thermostatic Expansion Valves Thermostatic Expansion Valves TCCE Series Application TCCE thermostatic expansion valve is used to regulate refrigerant flow into the evaporator, especially in applications
Pressure control valve Type KDC
Data sheet Pressure control valve Type KDC 65-00 The KDC valve is a pressure control valve. The valve controls the discharge pressure of the compressor to ensure fast build-up of pressure and lubrication
quality products for refrigeration and air conditioning products suitable for CFC, HCFC and HFC 2006 release PRODUCT HANDBOOK
quality products for refrigeration and air conditioning products suitable for CFC, HCFC and HFC 2006 release www.castel.it PRODUCT HANDBOOK Pessano - February 2006 17 Thermostatic expansion valves Solenoid
Technical brochure Electrically operated expansion valves, type ETS 6
MAKING MODERN LIVING POSSIBLE Technical brochure Electrically operated expansion valves, type ETS 6 With many years of experience the current range of Electronic Expansion Valves offers high reliability
Semi-hermetic reciprocating compressors
v9 FCAT00.6-EN Product Selection Catalogue Version Hz Catalogue index Index - General information General information Range of models Special features Technical specifications Multifunctional device Kriwan
DHAXW4-07*/M DHOXW-06* Input Power. 32 W (only for 12 and 24 DC) 40 W (only for 110 and 220 DC) 8 W 25 W T6 T4 8 W 25 W T4 T3 T6 T4 T4 T3 25 W 8 W
www.atos.com Table TE137obs/E Stainless steel valves for water base fluids standard or ex-proof solenoid valves with Multicertification TEX, IECEx, EC or CULUS certification UL certified valves are obsolete
Electric expansion valve Type ETS ETS 400
MAKING MODERN LIVING POSSIBLE Data sheet Electric expansion valve Type ETS 12.5 - ETS 400 ETS is a series of electric expansion valves for precise liquid injection in evaporators for air conditioning and
Thermostatic expansion valves Type TGE 10, TGE 20 and TGE 40
MAKING MODERN LIVING POSSIBLE Data sheet Thermostatic expansion valves Type TGE 10, TGE 20 and TGE 40 TGE is a dedicated designed series of thermostatic expansion valves for all standard refrigerants including
Shut-off valves in stainless steel Types SVA-S SS and SVA-L SS
Data sheet Shut-off valves in stainless steel s SVA-S SS and SVA-L SS In certain specific areas such as outdoor applications and corrosive atmospheres, such as coastal installations, there is a need for
Condensed Catalog 410A January 2008
CATALOG Page 1 Condensed Catalog January 2008 This condensed catalog contains product specifically for R- applications. By including a minimum of engineering information we are able to provide a concise
VTZ variable speed Reciprocating compressors
MAKING MODERN LIVING POSSIBLE Application guidelines VTZ variable speed Reciprocating compressors R404A, R507, R407C, R134a www.danfoss.com CONTENT VARIABLE SPEED COMPRESSORS... 4 Speed control...4 Advantages
SCY. Discharge line mufflers Refrigeration & Climate Components Solutions. n Applications
Refrigeration & limate omponents Solutions 21.1 TY-EN 21.1-6 / 02-2018 SY n Applications Reduction of noise caused by gas pulses in the discharge lines of refrigerating and air conditioning installations.
Electric expansion valve Type ETS ETS 400
Data sheet Electric expansion valve Type ETS 12.5 - ETS 400 ETS is a series of electric expansion valves for precise liquid injection in evaporators for air conditioning and refrigeration applications.
Shell-and-tube dry expansion evaporators Alfa Laval DH
Alfa Laval in brief Alfa Laval is a leading global provider of specialized products and engineered solutions. Our equipment, systems and services are dedicated to helping customers to optimize the performance
Solenoid valves Type EVU for fluorinated refrigerants
Data sheet Solenoid valves EVU for fluorinated refrigerants EVU solenoid valves are designed to fit into compact refrigeration systems. Available in direct and pilot operated versions, they can be applied
DRY-EXPANSION EVAPORATORS
DRY-EXPNSION EVPORTORS DP-273-1 EN DH SERIES RF SERIES Table of contents Performance and features 3 Design data 4 PED (E) approval 4 Denomination 4 Materials 5 apacity and maximum allowable water flow
REFRIGERANTS AND LUBRICANTS
Service Engineers Section Bulletin No 10 REFRIGERANTS AND 1.0 INTRODUCTION - THE NEED FOR IN REFRIGERATION SYSTEMS Lubricants (oils) are required in refrigeration systems to: Reduce friction by interposing
Thermostatic Expansion
Thermostatic Expansion Valves Thermostatic Expansion Valves TC Series Application TC thermostatic expansion valves are used to adjust the supply of refrigerant in evaporator by controlling the superheat.
TI Series - Thermo -Expansion Valves
EMERSON TI series of Thermo -Expansion Valves with interchangeable orifices are designed for refrigeration applications such as display cases in supermarkets, walk-in/reach-in coolers, freezers, soft ice
Thermo -Expansion Valves Series TX7
Technical Bulletin TX7 series of Thermo -Expansion Valves are designed predominantly for AC, heat pumps, close control and industrial process cooling applications. The TX7 is ideal for those applications
HCYCT (non adjustable) / HCYCTR (adjustable)
Refrigeration & limate omponents Solutions 44.1 HYT (non adjustable) / HYTR (adjustable) n Applications are used on low oil return systems of refrigerating and air conditioning installation. They are mounted
CHECK VALVES MUELLER CHECK VALVES TECHNICAL DATA. Flare to Flare. Solder to Solder. Solder to Solder - Extended Ends. Shipped loosely assembled.
MUELLER CHECK VLVES TECHNICL DT CHECK VLVES vailable in 1/4 through 5/8 flare sizes and 1/4 thru 7/8 solder sizes. Recognized under the component program of Underwriters Laboratories for use in the US
Repair any problems or leaks before retrofitting. Affix labels to the vehicle showing conversion status. Observe all safety recommendations.
The use of R134a in mobile A/C systems designed for R-1 2 refrigerant causes higher discharge pressures (as much as 10-15%) and necessitates changing the compressor lubricant from mineral oil (5GS) to
KTM MODEL NB / MB THREE-WAY BALL VALVES 2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT)
KTM MODEL N / M THREE-WY LL VLVES 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) single KTM 3-way ball valve replaces several 2-way valves, saving valuable space and simplifying piping FETURES Positive alignment
Superior Supplying Quality Products To The ACR Industry Since 1938
Catalog No. R-200 Superior Supplying Quality Products To The CR Industry Since 98 ir Conditioning and Refrigeration Valves, Wrot and Flare Fittings, and ccessories Catalog No. R-200 ir Conditioning and
Electronic suction modulating valves type KVS
MAKING MODERN LIVING POSSIBLE Technical brochure Electronic suction modulating valves type KVS KVS is a series of electronic suction modulating valves for AC transport and refrigeration applications. Accurate
Electric expansion valves Type ETS 6
MAKING MODERN LIVING POSSIBLE Data sheet Electric expansion valves Type ETS 6 The range of Electric expansion valves are based on many years of experience. ETS 6 secure reliability and provide a precise
50Hz ZBD45KCE-TFD R404A Dew Point
50Hz ZBD45KCE-TFD R404A Dew Point 60 50 40 30 20 10-25 -20-15 -10-5 0 5 10 Minimum evaporating temp. with: 25 C Suction Gas Return 10K Suction Superheat Suction Return Temperature 20,0 C Evaporating Temperature
Specification Manual
Specification Manual Ground Source Heat s www.northernheatpump.com Northern Geo LLC 75 West Veum Appleton, MN 56208 320-297-9100 info@northerngeo.com 09/03/2014 NL003 NorthStar Series Features & Benefits
Inline filter with filter element according to DIN 24550
Inline filter with filter element according to DIN 24550 RE 51448/06.11 Replaces: RE 51400 1/18 Type 110LEN0040 to 0400; 110LE0130, 0150 Size according to DIN 24550: 0040 to 0400 Additional sizes: 0130,
Block mounting filter, for sandwich plate mounting
Block mounting filter, for sandwich plate mounting RE 51427/01.11 1/16 Type 320PZR025, 075, 125 Size according to DIN 24550: 025 to 125 Nominal pressure 320 bar [4641 psi] Port according to ISO4401 size
Inline filter with filter element according to DIN 24550
Inline filter with filter element according to DIN 24550 RE 51421/07.11 Replaces: 12.10 1/16 Type 245LEN0040 to 400; 245LE0130, 0150 Size according to DIN 24550: 0040 to 0400 Additional sizes: 0130, 0150
Voltage 400V 3N 50Hz. L W H Weight Fans Surface. Air Flow [m 3 /h] Primary [m 2 ] Ø [mm]
![Voltage 400V 3N 50Hz. L W H Weight Fans Surface. Air Flow [m 3 /h] Primary [m 2 ] Ø [mm]](/thumbs/75/72310912.jpg "Voltage 400V 3N 50Hz. L W H Weight Fans Surface. Air Flow [m 3 /h] Primary [m 2 ] Ø [mm]")
Open condensing units with air condenser and semi-hermetic compressor Galvanized and painted in RAL7035 base Semi-hermetic compressor Air condenser unit with 4 poles fans 230/1 Vibration absorber on discharge
Stop valves SVA-DL & SVA-DH
MAKING MODERN LIVING POSSIBLE Technical brochure Stop valves SVA-DL & SVA-DH 250-300 SVA-DL and SVA-DH are angleway stop valves designed to meet all industrial refrigeration application requirements. SVA-DL