Accessories. Blowguns Silencers Bins Bags Copper Tubing. Parker Hannifin Corporation Fluid System Connectors Otsego, MI

Transcription

1 Blowguns Silencers Bins Bags opper Tubing Parker annifin orporation luid System onnectors Otsego, MI

2

3 atalog 3501 Blow uns 410-S ontrolled Pressure 410-SV ontrolled Pressure 415-S ontrolled Pressure 400-S-TIP Replacement Tip 410 ull Pressure 410-N ull Pressure p. 5 p. 5 p. 5 p. 5 p. 5 p N ull Pressure B441-NB B Series B442-SB B Series B443-NB B Series B444-SB B Series 0653 NPT/ p. 5 p. 6 p. 6 p. 6 p. 6 p. 7 p Angled Nozzle Straight Tube Nozzle ong Straight Tube Nozzle Short Angled Tube Nozzle ong Angled Tube Nozzle Short oanda ffect Nozzle Nozzles p. 7 p. 8 p. 8 p. 8 p. 8 p Air Screen Nozzle Booster Nozzle Booster Nozzle with Air Screen Silencers Threaded Silencer UN, NPT or 0673 ompact Threaded Silencer Male, M Miniature Silencer 0671 Plug-In Silencer p. 9 p. 9 p. 9 p. 0 p. 0 p low ontrol Silencer Male NPT, Threaded Silencer NPT,,M low ontrol Silencer 0682 Stainless Steel Threaded Silencer Male 0683 Stainless Steel Threaded Silencer Male NPT p. 0 p. 1 p. 1 p. 1 p. 1 p B 16 ompartment 24-B 24 ompartment ADJ-B Adjustable ompartments 4B-SR Slide Rack SR-STAND Stand 9-D 9 Drawer Bins p. 2 p. 2 p. 2 p. 2 p. 3 p D 18 Drawer 24B-ABT 24 Opening 40B-ABT 40 Opening PNU-AB Mobile abinet 4X6PSB lear Plastic Bag 6X8PSB lear Plastic Bag Bags p. 3 p. 3 p. 4 p. 4 p. 4 p. 4 opper Tubing X50T oiled opper Tubing p. 4 Parker annifin orporation luid System onnectors Otsego, MI 4

4 atalog 3501 Blow uns ontrolled Pressure Blow uns Parker ontrolled Pressure Blow uns meet OSA requirements (section 29 R paragraph b), and directive # ompressed air shall not be used for cleaning purposes except where reduced to less than 30 psi, and then only with effective chip guarding and personal protective equipment. Parker ontrolled Pressure Blow uns have a black epoxy coated zinc body and vented nozzles to prevent pressure build-up when dead ending occurs up to 150 psi. SPIIATIONS MAXIMUM PRSSUR PSI. (B) P/PI 410-S SV S S Parker ontrolled Pressure Blow uns features thumb lever valve actuator and brass nozzle. Inlet port is 1/4 NPT. 410-SV Parker Venturi Nozzle ontrolled Pressure Blow un with thumb lever valve and large venturi side ports for high volume flow. Inlet port is 1/4 NPT. 415-S Parker ontrolled Pressure Blow uns features push button valve actuator and brass nozzle. Inlet port is 1/4 NPT. 400-S-TIP Blow un Replacement Tip ull Pressure Blow uns The following Parker Blow uns must have a pressure reg u la tor setting below 30 psi to conform to OSA safety re quire ments 29 R Paragraph b. SPIIATIONS MAXIMUM PRSSUR PSI. (B) P/PI N N Parker two way thumb lever valve has an zinc body with 1/4 NPT inlet and 1/8 NPS outlet. Note: Standard un without nozzle. 410-N Parker thumb lever style Blow un features a zinc body, brass nozzle, and 1/4 NPT female inlet. 415-N Parker Blow un features a push button style actuator, zinc body with a brass nozzle and 1/4 NPT female inlet. Parker annifin orporation luid System onnectors Otsego, MI 5

5 atalog 3501 B Series Blow uns Made from impact resistant plastic, B Series blow guns are durable and versatile. xtended nozzles allow air to be directed where it is required. The pistol grip trigger allows greater control over the amount of air delivered. ombined, these two features provide superior performance in a light weight, ergonomically designed package. Nozzles are available in short and extended versions and most models meet OSA directives on the use of compressed air for cleaning purposes. OSA directive #100-1 states that when dead ending occurs a static pressure at the main orifice shall not exceed 30 psi. or those blow guns that do not meet this requirement, OSA requires that compressed air shall not be used for cleaning purposes except where reduced to less than 30 psi, and then only with effective chip guarding and personal protective equipment (section 29 R paragraph b). Please refer to the blow gun descriptions below for compatibility with OSA directive # Nozzle configurations are designed for maximum flexibility. Applications with special requirements may find the B443-NB with a 1/8 NPT fitting convenient for adapting existing nozzles or extra-long extensions. or information on specials or madeto-order blow gun nozzles, please contact the Quick oupling Division. asy to control variable flow pistol grip trigger. Nozzles available that meet OSA requirements. ightweight ergonomical design. Bodies are constructed of impact resistant plastic. SPIIATIONS RATD PRSSUR (PSI) 175 TMPRATUR RAN T PORT XAMP: B442-SB B NOMNATUR TO 120 1/4 NPT ATTRIBUT: B SRIS BOW UN 4 T PORT 16TS 42 S B NZ STY 41 - XTNDD 42 - XTNDD (OSA) 43-1/8" NPT 44 - SORT (OSA) MTS OSA RQUIRMNTS S - YS N - NO OOR B - BAK B441-NB B Series Blow un NZ MTS OSA RQUIRMNTS B441-NB XTNDD NO B443-NB B Series Blow un B443-NB NZ 1/8 MA NPT MTS OSA RQUIRMNTS NO B442-SB B Series Blow un NZ MTS OSA RQUIRMNTS B442-SB XTNDD YS B444-SB B Series Blow un NZ MTS OSA RQUIRMNTS B444-SB VORT YS Parker annifin orporation luid System onnectors Otsego, MI 6

6 atalog 3501 New nergy Saving low Reducer System The flow reducer system allows for 40% savings in air consumption and guarantees stable flow, max 120 NI/min an be adapted to all available interchangeable nozzles Available in a lower connection, threaded 1/4 NPT or 1/4 When combined with a specific interchangeable nozzle, the energy saving blow gun complies to OSA (b) nozzle and or OSA (b), addressing reduced pressure when in close proximity to an obstacle, chip guarding and noise level low Reducer Blowgun NPT/ NPT /4 M12X /4 M12X ombined with the osha (B) nozzle, when in close proximity to an obstacle, the flow is deviated to reduce pressure to 0.5 Bar at the end of the nozzle. The flow reducer system allows for 40% savings in air consumption and guarantees stable flow max 120 nl/m K Polymer Body Progressive ontrol Blowgun /4 M12X /4 M12X hoose from the wide range of interchangeable nozzles to have the right tool for the job - please refer to pages 8 and 9 K lower connection upper connection Polymer Body Progressive ontrol Blowgun Short Angled Nozzle NPT/ NPT /4 M12X /4 M12X lower connection upper connection K Polymer Body Nickel Plated Nozzle Parker annifin orporation luid System onnectors Otsego, MI 7

7 atalog Straight Tube Nozzle ong MTRI M12X SPRAD O ON MAX OW TORAN ± 10% NOIS V ISO NI/M 83 dba Directive 2003/10/* Straight Tube Nozzle Short MTRI M12X SPRAD O ON MAX OW TORAN ± 10% NOIS V ISO NI/M 82 dba OSA (b) conforming Directive 2003/10/* Angled Tube Nozzle ong MTRI M12X SPRAD O ON MAX OW TORAN ± 10% NOIS V ISO NI/M 82 dba Directive 2003/10/* Angled Tube Nozzle Short MTRI M12X SPRAD O ON MAX OW TORAN ± 10% NOIS V ISO NI/M 86 dba OSA (b) conforming Directive 2003/10/* * earing protectors should always be worn when exposure to noise lasts longer than 8 hours. Parker annifin orporation luid System onnectors Otsego, MI 8

8 atalog oanda ffect Nozzle MTRI M12X SPRAD O ON MAX OW TORAN ± 10% NOIS V ISO NI/M 73 dba OSA (b) conforming Directive 2003/10/* Air Screen Nozzle MTRI M12X SPRAD O ON MAX OW TORAN ± 10% NOIS V ISO15744 JT 24 SRN NI/M 86 dba OSA (b) conforming Directive 2003/10/* Booster Nozzle MTRI M12X SPRAD O ON MAX OW TORAN ± 10% NOIS V ISO NI/M 99 dba Directive 2003/10/* Booster Nozzle with Air Screen MTRI M12X SPRAD O ON MAX OW TORAN ± 10% NOIS V ISO JT 26 SRN NI/M 86 dba OSA (b) conforming Directive 2003/10/* * earing protectors should always be worn when exposure to noise lasts longer than 8 hours. Parker annifin orporation luid System onnectors Otsego, MI 9

9 atalog 3501 Silencers Technical Specification of Silencers: MATRIA WORK PRSSUR WORK TMPRATUR STRD BRONZ 175 PSI -4 TO 300 POYTYN 145 PSI STASS ST 175 PSI -4 TO Threaded Silencer UN, NPT or UN/NPT J * / / / / J / / / / / * Brass Body 0673 ompact Threaded Silencer Male, M5 Sintered Bronze M5X / / / / K Body Nickel Plated Brass Sintered Bronze 0677 Miniature Silencer 0671 Plug-In Silencer Body Nickel Plated Brass Sintered Bronze / / / / / Body Nickel Plated Brass Sintered Bronze Parker annifin orporation luid System onnectors Otsego, MI 0

10 atalog 3501 Polyethylene/Plastic Brass Body Silencer Sintered Bronze low ontrol Silencer Male NPT, NPT M MAX / / / / M MAX / K 0676 low ontrol Silencer / / O TURNS OW SM AT 87 PSI NOIS V dba* * dba at 87 PSI and 12 SM / / / onsult us for flow characteristics 0682 Stainless Steel Threaded Silencer Male body stainless steel 316 K Threaded Silencer NPT,,M5 NPT / Polyethylene Body Plastic Thread / / / / / / / / M5X / / / / / Stainless Steel Threaded Silencer Male NPT NPT body stainless steel / K / / / Parker annifin orporation luid System onnectors Otsego, MI 1

11 atalog ompartment arge Scoop Box Prime cold rolled steel outer shell igh impact styrene insert with 16 compartments Scooped bottom compartments for easy part removal ull piano hinge on cover provides rigidity Positive pull-down catch keeps cover tightly closed to prevent part migration andle allows for easy transport NUMBR DIMNSIONS (.) WIDT DPT IT 16-B ompartment arge Scoop Box Prime cold rolled steel outer shell igh impact styrene insert with 24 compartments Scooped bottom compartments for easy part removal ull piano hinge on cover provides rigidity NUMBR Positive pull-down catch keeps cover tightly closed to prevent part migration andle allows for easy transport DIMNSIONS (.) WIDT DPT IT 24-B ADJ-B Prime cold rolled steel outer shell igh impact styrene insert with 4 fixed vertical compartments and 9 moveable dividers adjustable on 1 centers ull piano hinge on cover provides rigidity Positive pull-down catch keeps cover tightly closed to prevent part migration NUMBR DIMNSIONS (.) WIDT DPT IT OMMNTS ADJ-B ADJUSTAB asy lide Slide Rack (olds 4 16-B or 24-B per rack) Sturdy construction using prime cold-rolled steel ach cradle holds up to 40 lbs asy glide slides allow boxes to move in and out smoothly enter braces on cradles provide extra rigidity Reinforced rack keeps boxes level Boxes can be easily removed for transport to work areas Base and locking hinge are available as accessories NUMBR DIMNSIONS (.) WIDT DPT IT 4B-SR Parker annifin orporation luid System onnectors Otsego, MI 2

12 atalog 3501 SR-Stand Sturdy all steel construction Raises units 15 inches off the floor egs attach easily using fasteners provided Durable gray powder finish NUMBR DIMNSIONS (.) WIDT DPT IT SR-STAND 20 5/8 16 1/4 15 5/8 9 Drawer abinet Prime cold rolled steel construction igh density drawer cabinet, easy to store large quantities of small parts Drawers feature interlocking design for superior strength Drawers have full width handles and easy glide runners ach drawer includes 2 easy label dividers, which are adjustable on 1 centers abinets can be stacked using mounting holes Ships fully assembled NUMBR DIMNSIONS (.) DRAWR DIMNSIONS (.) WIDT DPT IT WIDT DPT IT 9-D Drawer abinet Prime cold rolled steel construction igh density drawer cabinet, easy to store large quantities of small parts Drawers feature interlocking design for superior strength Drawers have full width handles and easy glide runners ach drawer includes 2 easy label dividers, which are adjustable on 1 centers abinets can be stacked using mounting holes Ships fully assembled NUMBR DIMNSIONS (.) DRAWR DIMNSIONS (.) WIDT DPT IT WIDT DPT IT 18-D Opening Bin All welded, prime cold rolled steel ully hemmed 1 1/8 bin fronts to hold labels and retain parts Roll-formed sides for increased strength and stability Ribbed and hemmed dividers provide added strength Modular with most 12 deep bins and drawer cabinets; mounting holes are located at both the top and bottom Ships fully assembled NUMBR DIMNSIONS (.) B DIMNSIONS (.) WIDT DPT IT WIDT DPT IT 24B-ABT Parker annifin orporation luid System onnectors Otsego, MI 3

13 atalog Opening Bin All welded, prime cold rolled steel ully hemmed 1 1/8 bin fronts to hold labels and retain parts Roll-formed sides for increased strength and stability Ribbed and hemmed dividers provide added strength Modular with most 12 deep bins and drawer cabinets; mounting holes are located at both the top and bottom Ships fully assembled NUMBR DIMNSIONS (.) B DIMNSIONS (.) WIDT DPT IT WIDT DPT IT 40B-ABT Pneumatic abinet igh quality all-steel construction Partitioning slots provide flexibility for customization Drawer locks limit access to prevent loss and improve safety when moved Drawer interlock prevent opening multiple drawers that could cause accidental tip over Available fitting and connector labels with photos make easy selection and restock easy ocking 4 heavy-duty casters Retainer top with a nonskid mat work surface NUMBR DIMNSIONS (.) WIDT DPT IT DRAWRS PNU-AB AND 1-9 lear Plastic Shipping Bags PSB Reusable, clear polyethylene, zip-lock style bags with panels for marking part number, quantity, and availability information. eatures easy visual part identification. Ideal for custom packaging of less than box quantities. SIZ 4X6PSB 4 X 6 6X8PSB 6 X 8 opper Tubing opper tubing meets A.S.T.M. specification B-280 (copper tube for refrigeration field service) TUB O.D. TUB I.D. WA TIKNSS T PR OI X50T / X50T / X50T / X50T / X50T / X50T / Parker annifin orporation luid System onnectors Otsego, MI 4