Spray Pattern of Each Disks of New Sector Spray Nozzle Disks

Size: px

Start display at page:

Download "Spray Pattern of Each Disks of New Sector Spray Nozzle Disks"

Amelia Fowler
6 years ago
Views:

Pattern of Each s of New Sector s New Sector N-D-5S New Sector NN-Y-8S New Sector NN-D-6S New Sector NN-C-& NN-C-6S Section View New Sector NN-B-7S NN-B-7S

00 49 60 NN-D-5S 55 0.57 0.70 approx. 00 49 6 NN-D-5S 55 0.65 0.79 approx. 00 49 6 NN-D-6S 55 0.8.0 approx. 00 49 6 NN-D-7S 60.00. approx. 00 49 64 NN-D-8S 60.4.5 approx.

67 approx. 00 49 70 NN-Y-6S 60.7.0 approx. 90 49 7 NN-Y-8S 65.6.89 approx. 90 49 7 NN-Y-0S 80.00.68 approx. 90 49 7 NN-WY-0S 75..9 approx. 0 49 74 NN-Y-5S 05 4.

1 Pattern of Each s of New Sector s New Sector N-D-5S New Sector NN-Y-8S New Sector NN-D-6S New Sector NN-C-& NN-C-6S Section View New Sector NN-B-7S NN-B-7S Section View New Sector Exterior view (μm)(.5mpa) (.0MPa) (.5MPa) angle * SU-0-80MS approx. 80 * SU-0400MS approx NN-D-5S approx NN-D-5S approx NN-D-6S approx NN-D-7S approx NN-D-8S approx NN-D-9S approx NN-C-5S approx NN-C-6S approx NN-B-6S approx NN-B-7S approx NN-Y-6S approx NN-Y-8S approx NN-Y-0S approx NN-WY-0S approx NN-Y-5S approx. 90 *Please note that these items are not for use on knapsack power sprayers, and that spraying pressure should be under.0mpa. 7 No. Item Min. Unit Use 49 New Sector Type S 0

New Sector for Manual ers Type S NN-SL-0S Regulating Plug ES ULC (Patented) (μm)(0.mpa) (L/min)(0.MPa) (L/min)(0.MPa) (L/min)(0.MPa) (0.MPa) 49 6 NN-D-6S 50 0.6 0.7 0.45 approx. 85 49 64 NN-D-8S 70 0.

2 New Sector for Manual ers Type S NN-SL-0S Regulating Plug ES ULC (Patented) (μm)(0.mpa) (L/min)(0.MPa) (L/min)(0.MPa) (L/min)(0.MPa) (0.MPa) 49 6 NN-D-6S approx NN-D-8S approx NN-Y-6S approx * NN-SL-0S approx NN-Y-8S approx NN-Y-0S approx NN-Y-5S approx. 00. This item (NN-SL-0) is our standard nozzle disk for manual sprayers.. Items except NN-SL-0 are basically for motor sprayers; however, by applying a regulating plug, these items can be used on manual sprayers.. Use of either of the above nozzle disk at a low pressured manual sprayer, Regulating Plug E is required for a fan-shaped spray pattern. 4. Regulating Plug ES is for exclusive use with New Sector Type S. Not compatible with other disks. (μm)(0.mpa) (L/min)(0.MPa) (L/min)(0.MPa) (L/min)(0.4MPa) (0.MPa) UL-08-80C approx UL--80C approx UL-40C approx. 05 No. Item Min. Unit Use 49 New Sector for Manual ers Type S Regulating Plug ES ULC 0 SVK (Patented) Imperforate (μm)(.5mpa) (L/min)(.0MPa) (L/min)(.5MPa) SV--40K approx SV-0-55K approx SV-8-50K approx SV-49-45K approx. 45 SVC (Patented) 4 (μm)(.5mpa) (L/min)(.0MPa) (L/min)(.5MPa) SV-07-80C approx SV-0-80C approx SV-0-80C approx SV-0-80C approx. 80 No. Item Min. Unit Use 49 6 SVK SVC Imperforate Imperforate P 0 7 Ceramic Tip Type S (μm)(.5mpa) (L/min)(.0MPa) (L/min)(.5MPa) 49 8 CV080S approx CV780S approx CV80S approx CV980S approx CV680S approx. 80 No. Item Min. Unit Use 49 Ceramic Tip S-Type 0

SU (μm)(.5mpa) (L/min)(.0MPa) (L/min)(.5MPa) Equivalent * 49 SU-0-80 45 0.9 0. approx. 80 SU-0-80M * 49 SU-0400 55 0. 0.9 approx. 00 SU-0400M 49 SU-0700 55 0.57 0.70 approx.

3 SU (μm)(.5mpa) (L/min)(.0MPa) (L/min)(.5MPa) Equivalent * 49 SU approx. 80 SU-0-80M * 49 SU approx. 00 SU-0400M 49 SU approx. 00 NN-D SU approx. 00 NN-D SU approx. 00 NN-D SU approx. 00 NN-D SU approx. 00 NN-D SU approx. 00 NN-D SU approx. 90 NN-Y SU approx. 90 NN-Y-8 49 SU approx. 90 NN-Y-0 49 SU approx. 0 NN-WY-0 *) Please note that these items are not for use on knapsack power sprayers, and that spraying pressure should be under.0mpa. No. Item Min. Unit Use 49 SU 0 Curved Tip Tip (μm)(.5mpa) (L/min)(.0MPa) (L/min)(.5MPa) * 49 9 SU- N-CSU approx. 80 * 49 9 SU-4 N-CSU approx SU-7 N-CSU approx SU-8 N-CSU approx SU-0 N-CSU approx SU- N-CSU approx SU-5 N-CSU approx SU-7 N-CSU approx SU- N-CSU approx SU-9 N-CSU approx SU-6 N-CSU approx SU-9 N-CSU approx. 0 *) Please note that these items are not for use on knapsack power sprayers, and that spraying pressure should be under.0mpa. No. Item Min. Unit Use 49 9 Curved Tip 0 Item made on demand SM (for Fine Mist Type 5) (μm)(.5mpa) (L/min)(.0MPa) (L/min)(.5MPa) (L/min)(.0MPa) 49 SM approx SM approx No. Item Min. Unit Use 49 9 SM (for Fine Mist #-5) 0

KIRINASHI (Ultra Low-Drift) Powerful Tip angle is 0 (direct) when pressure is.0mpa angle is 0 when pressure is.0mpa φ (μm)(.0mpa) (L/min)(0.5MPa) (L/min)(.0MPa) (L/min)(.5MPa) 49 N-KE-6B φ.6 780.74.

600.68.8.9 approx. 0 49 7 N-KF-4B φ.4 60.95.76.8 approx. 0 49 8 N-KF-5B φ.5 600..4.84 approx. 0 49 9 N-KF-7B φ.7 600.9 4. 5.04 approx. 0 No. Item Min.

4 KIRINASHI (Ultra Low-Drift) Powerful Tip angle is 0 (direct) when pressure is.0mpa angle is 0 when pressure is.0mpa φ (μm)(.0mpa) (L/min)(0.5MPa) (L/min)(.0MPa) (L/min)(.5MPa) 49 N-KE-6B φ (Direct) 49 N-KE-9B φ (Direct) 49 N-KE-0B φ (Direct) 49 4 N-KE-4B φ (Direct) 49 6 N-KF-B φ approx N-KF-B φ approx N-KF-4B φ approx N-KF-5B φ approx N-KF-7B φ approx. 0 No. Item Min. Unit Use 49 Tip for KIRINASHI Powerful: Type KE 0 Item made on demand 49 Tip for KIRINASHI Powerful: Type KF 0 Item made on demand KIRINASHI (Ultra Low-Drift) Powerful Tip KIRINASHI (Ultra Low-Drift) Sector Tips are red. angle is 00 when pressure is.0mpa φ (μm)(.0mpa) (L/min)(0.5MPa) (L/min)(.0MPa) (L/min)(.5MPa) 49 6 N-KA-4R φ SR-A approx N-KA-5R φ SR-A approx N-KA-6R φ SR-0 approx N-KA-7R φ SR-4 approx N-KA-8R φ SR-4 approx N-KA-9R φ SR-4 approx N-KA-0R φ SR-4 approx N-KA-R φ SR-5 approx N-KA-R φ SR-6 approx N-KA-R φ SR-6 approx N-KA-4R φ SR-6 approx N-KA-5R φ SR-6 approx. 0 <Round Tip for Power ers> a b c Round Tip Photo No. φ (μm)(0.7mpa) (L/min)(0.7MPa) (L/min)(.0MPa) a 49 N-KA-055SB φ SR- approx. 0 b 49 4 N-KA-6SY φ SR- approx. 0 c 49 6 N-KA-8G φ SR-6 approx. 0 No. Item Min. Unit Use 49 6 KIRINASHI (Ultra Low-Drift) Sector Tip 0 Item made on demand 49 Round Tip for Power ers 0 Round Tip for Manual ers a b c d KIRINASHI (Ultra Low-Drift) Sector Tip for Manual ers 74 Photo No. Ave. Drop Size Vol. Vol. φ (μm)(0.mpa) (L/min)(0.MPa) (L/min)(0.MPa) a 49 N-KAL-09SB φ SR- approx. 0 b 49 N-KAL-SY φ SR-5 approx. 0 c 49 5 N-KAL-G φ SR-7 approx. 0 Photo No. Ave. Drop Size Vol. Vol. φ (μm)(0.mpa) (L/min)(0.MPa) (L/min)(0.MPa) No. Item Min. Unit Use 49 Round Tip for Manual ers KIRINASHI (Ultra Low-Drift) Sector Tip for Manual ers 0 d 49 6 N-KAL-4R φ SR-6 approx N-KAL-5R φ SR-6 approx. 90

KIRINASHI (Ultra Low-Drift) ES Tip angle is 00 when pressure is.0mpa φ (μm)(.5mpa) (L/min)(.0MPa) (L/min)(.5MPa) 49 7 5 N-ES-5 φ 0.5 0 0.5 0.4 SR-A approx. 00 49 7 6 N-ES-6 φ 0.6 50 0.5 0.6 KS-8 approx.

5 KIRINASHI (Ultra Low-Drift) ES Tip angle is 00 when pressure is.0mpa φ (μm)(.5mpa) (L/min)(.0MPa) (L/min)(.5MPa) N-ES-5 φ SR-A approx N-ES-6 φ KS-8 approx N-ES-7 φ KS-9 approx N-ES-8 φ KS-0 approx N-ES-9 φ KS- approx N-ES-0 φ KS- approx N-ES- φ SR-4 approx. 0 KIRINASHI (Ultra Low-Drift) KS Tip angle is 60 when pressure is.5mpa φ (μm)(.5mpa) (L/min)(.0MPa) (L/min)(.5MPa) N-KS-7 φ KS-7 approx N-KS-8 φ KS-8 approx N-KS-9 φ KS-9 approx N-KS-0 φ KS-0 approx N-KS- φ KS- approx N-KS- φ KS- approx N-KS- φ KS- approx N-KS-4 φ KS-4 approx N-KS-5 φ KS-5 approx. 60 Please do not use other nozzle disks than authorized disks on KIRINASHI nozzles. Please also note that replacing disks will not change the Flow Rate. Please also note these items require seals (HF-708, HF-709) for proper performance. Y Tip for New Sector This Y-shaped tip enables a flat-fan shaped spray pattern in two directions, thereby Appearance Ave. Drop Size (μm)(.5mpa) Item Y- Code Vol. (L/min)(.0MPa) Vol. (L/min)(.5MPa) Vol. (L/min)(.0MPa) *49 50 N-Y90-SU0MS 45 N-Y90-SU0MS 90 SU-0-80M approx. 80 *49 5 N-Y90-SU04MS 55 N-Y90-SU04MS 90 SU-0400M approx N-Y90-D5S 55 N-Y90-D5S 90 NN-D approx N-Y90-D5S 55 N-Y90-D5S 90 NN-D approx N-Y90-D6S 55 N-Y90-D6S 90 NN-D approx N-Y90-D7S 60 N-Y90-D7S 90 NN-D approx N-Y90-D8S 60 N-Y90-D8S 90 NN-D approx N-Y90-D9S 60 N-Y90-D9S 90 NN-D approx. 00 * Please note that these items are not for use on knapsack power sprayers, and that spraying pressure should be under.0mpa. 4 5 Appearance Y-shaped Tip for KIRINASHI KIRINASHI nozzles feature minimal drift, which adds for the operator's safety. By applying this Y-shaped tip, the sprayer will even ensure high effectiveness. Available in 45 and 90 degrees. Ave. Drop Size (μm)(.5mpa) Item Y- φ Vol. Vol. (L/min)(.0MPa) (L/min)(.5MPa) N-KAY N-KAY φ SR-A approx N-KAY N-KAY φ SR-0 approx N-KAY N-KAY φ SR-0 approx N-KAY N-KAY φ SR-8 approx N-KAY N-KAY45-45 φ SR- approx N-KAY N-KAY φ SR-A approx N-KAY N-KAY φ SR-0 approx N-KAY N-KAY φ SR-0 approx N-KAY N-KAY φ SR-8 approx N-KAY N-KAY90-90 φ SR- approx. 00 No. Item Min. Unit Use 49 7 KIRINASHI (Ultra Low-Drift) ES Tip 0 Item made on demand 49 7 KIRINASHI (Ultra Low-Drift) KS Tip 0 Item made on demand 49 Y-shaped Sector Tip 0 Item made on demand Y-shaped KIRINASHI (Ultra Low- Drift) Tip (45 ) 0 Item made on demand Y-shaped KIRINASHI (Ultra Low- Drift) Tip (90 ) 0 Item made on demand 75

for ZOOM Boom ers NN-ZV Specification (μm)(.5mpa) (L/min)(.5MPa) Reach(m)(.5MPa) Item Wide Narrow Wide Narrow Wide Narrow 49 8 NN-ZV- 80 40.4.5.5 6.0 approx. 5-60 49 8 NN-ZV-4 85 40.64.74.5 7.

0 approx. 5-90 * NN-ZV-0 abrasion-proof treatment NN-WZV NN-ZO N-KZV-0 Specification (μm)(.5mpa) (L/min)(.5MPa) Reach(m)(.5MPa) Item Wide Narrow Wide Narrow Wide Narrow 49 8 NN-WZV-6 00 00 5.55 5.76.

5MPa) Item Wide Narrow Wide Narrow Wide Narrow 49 8 7 NN-ZO- 85 450.6.7.5 6.0 approx. -50 49 8 8 NN-ZO-4 85 40.5.64.5 7.0 approx. 5-60 49 8 9 NN-ZO-6 90 40 4.54 4.65 4.0 7.5 approx.

5MPa) Item Wide Narrow Wide Narrow Wide Narrow 49 0 N-KZV-0 80 70 5.8 7. 4.0 9.0 approx. 5-70 4 For exclusive use on Zoom sprayers. All performances are when assembled. Doesn't wark alone. No.

6 for ZOOM Boom ers NN-ZV Specification (μm)(.5mpa) (L/min)(.5MPa) Reach(m)(.5MPa) Item Wide Narrow Wide Narrow Wide Narrow 49 8 NN-ZV approx NN-ZV approx NN-ZV approx *NN-ZV approx NN-ZV approx NN-ZV approx * NN-ZV-0 abrasion-proof treatment NN-WZV NN-ZO N-KZV-0 Specification (μm)(.5mpa) (L/min)(.5MPa) Reach(m)(.5MPa) Item Wide Narrow Wide Narrow Wide Narrow 49 8 NN-WZV approx NN-WZV approx NN-WZV approx Specification (μm)(.5mpa) (L/min)(.5MPa) Reach(m)(.5MPa) Item Wide Narrow Wide Narrow Wide Narrow NN-ZO approx NN-ZO approx NN-ZO approx NN-ZO approx NN-ZO approx. -90 Specification (μm)(.5mpa) (L/min)(.5MPa) Reach(m)(.5MPa) Item Wide Narrow Wide Narrow Wide Narrow 49 0 N-KZV approx For exclusive use on Zoom sprayers. All performances are when assembled. Doesn't wark alone. No. Item Min. Unit Use for ZOOM Boom ers (NN-ZV) 0 for ZOOM Boom ers (NN-WZV) 0 for ZOOM Boom ers (NN-ZO) 0 for KIRINASHI (Ultra Low- Drift) ZOOM Boom er (N-KZV-0) 0 for Rice-Field s Main Tip (Ceramic) φ (μm)(.5mpa) (L/min)(.0MPa) (L/min)(.5MPa) 49 9 HA-80-7 φ (Direct) 49 9 HA-80-0 φ (Direct) HA-80-4 φ (Direct) 49 9 HA-80-7 φ (Direct) HA-80-0 φ (Direct) HA-80-6 φ (Direct) No. Item Min. Unit Use 49 9 Main Tip 0 76 SP Type S (μm)(.5mpa) (L/min)(.0MPa) (L/min)(.5MPa) SP-0-5MS approx SP--5MS approx SP-8-0MS approx. 0 Z SP--5MS approx. 5 Z SP-5-5MS approx. 5 Z-6 Note No. Item Min. Unit Use 49 0 SP Type S 0

Reducer Joint 4 No. Item No. Item Note 50 60 J-K J- Joint: Male-SW.8, Female-G/4 50 60 J-K J- Joint: Male-G/4, Female-SW.

Joint: Male G/8, Female-G/ 75 64 J-58P J-58 Joint: Male G/, Female-G/8 75 56 J-08P J-08 Joint: Male-G/, Female-G5/8 75 7 BSM- BSM- Joint: Male-W0(with slit), Female-W0 75 0 H-0P H-0 Base Male-W0,

7 Reducer Joint 4 No. Item No. Item Note J-K J- Joint: Male-SW.8, Female-G/ J-K J- Joint: Male-G/4, Female-SW J-00P J-00P Joint: Male-G/4, Female-G/ J-7K J-7 Joint: Male-SW6, Female-G/ J-7K J-7 Joint: Male-G/8, Female-SW J-P J- Joint: Male G/8, Female-G/ J-84P J-84 Joint: Male G/8, Female-G/ J-58P J-58 Joint: Male G/, Female-G/ J-08P J-08 Joint: Male-G/, Female-G5/ BSM- BSM- Joint: Male-W0(with slit), Female-W H-0P H-0 Base Male-W0, Female-SW H-0P H-0 Base Male-W0, Female-G/ Joint Set of φ8.5: (ISO, SW) * Joint Set of φ0: (ISO, SW) *. Note. Comprises one J-(Photo)and one J-(Photo).. Comprises one J-7 (Photo)and one J-7 (Photo4).. Items with are packaged individually. Items without are a set of male and female joints. Ensuring Optimal Pressure When undertaking a spray operation, one must ensure that the optimal pressure is achieved ---- that is, the pressure at the nozzle tip where the nozzle's performance is mazimized or optimized. Special attention is required in order to ensure optimal pressure in practical situations, such as employing a long hose for operation (since a loss of pressure occurs as liquid moves through the hose, and using a motor sprayer for spraying over a sloped field (since if either the motor tank or the spraying person is positioned higher than the other, flutuation in pressure will occur).. Resistance created within the hose will lead to loss of pressure. An easy way to calculate such pressure loss is by applying the following formula: P=4.7 L Q/D5 ( where P represents pressure loss (Mpa), L represents hose length (meters), Q represents flow rate (liters per minute), and D represents inner diameter of hose (milimeters)). Altitude differences between the motor tank and the person spraying creates changes in pressure. Specifically, a 0 meter difference in altitude will lead to a pressure change of 0. Mpa. For example, when using KIRISTAR for orchards ( nozzles) the flow rate will be 6 liters per minute and the optimal pressure.5 MPa. When a hose with a inner diameter of 8.5mm and a length of 00m is attached to this product, under an altitude difference of 50 meters,..., then the pressure loss will be as follows: -Pressure loss related to hose: 0.4 Mpa -Pressure loss related to altitude difference 0.5 Mpa thereby leading to a flow pressure at orifice becoming.5 MPa. Based on such conditions, the pressure required at motor tank will be =.4 Mpa. 77

DSPS DSPS. Wide DC input. Switching Power Supply. Models: ESA-DS160 ESA-DS200. ESA-DS Ver.1.01 PAGE: 1 OF 7

DSPS DSPS. Wide DC input. Switching Power Supply. Models: ESA-DS160 ESA-DS200. ESA-DS Ver.1.01 PAGE: 1 OF 7 Wide DC input Switching Power Supply Models: ESA-DS160 ESA-DS200 ESA-DS Ver.1.01 PAGE: 1 OF 7 TABLE OF CONTENTS 1. INPUT... 3 1.1. DC INPUT... 3 2. DC OUTPUT - RATED (MAX)... 3 2.1. REGULATION... 3 2.2.