HP5. Heated Probe. Heated Probe for Micropollutants sampling. Main characteristics

Transcription

1 Heated Probe HP5

2 Heated Probe HP5 Main characteristics Heated sampling probe for the determination of particulate matter and chemicals in the gas phase. It s unique design, combined with the clamps-free slide and lock device, allows the probe to freely rotate around its axis, needed for the swirl angle determination in accordance with the EN16911 and US EPA M1/2, while making it easy to move it with just two fingers. Also, the probe can be fixed, in few seconds,to the hub in two different positions for common vertical stacks or for horizontal stacks, without the need of any further device. Built in accordance with the main international methods such as : - EN UNI velocity and flowrate in ducts - EN ISO particulate matter in low concentrations - EN ISO Dioxins/Furans and PCB - EN UNI Total Mercury - EN Heavy Metals - US EPA Method Modular assembling, rugged and easy to use Ready for swirl determination (digtal protractor needed) Integrated type S Pitot tube Suitable also for horizontal ducts Heated cartridge sealed AISI 304 steel Heated Probe for Micropollutants sampling All the elements exposed to stack fumes are realized entirely AISI 316 stainless steel. All the pneumatic and electronic connections are integrated in the compact single block structure. The Pitot tube and thermocouple are integrated within the probe body, more rugged more easy to use on stacks. With the HP5 it s possible to use internal suction tubes made in : - Titanium GR2 - Borosilicate glass - Quartz Maximum operative temperature of 400 C Pitot terminal not included HP5 Probe Lenght 0.5 m HP5 Probe Lenght 1.0 m HP5 Probe Lenght 1.5 m HP5 Probe Lenght 2.0 m HP5 Probe Lenght 2.5 m HP5 Probe Lenght 3.0 m Data Sheet Last Rev. 07/2014

3 Slide and lock device With this device, moving the heated probes, even the longest, along the stack axis, isn t a problem anymore. It smoothly moves on three rollers without friction but grants at the same time position stability and isolation from stack fumes. Completely built in anodized aluminum, the overall weight is less than 1.5 kgs. The fixing flange can turn on the probe axis, allowing to align the probe correctly independently from the holes of the stack port. This device is compatible with stack ports from 4 to 5 (DN80, DN100 and DN125) Slide device with rollers Pitot Terminals The type S Pitot terminal (Darcy) is entirely made of AISI 316 steel and equipped with double ring connections. Every piece is marker with unique serial number for the identification and traceability of the certification. The particular asymmetric shape is made with the purpose to easily identify the probe positioning respect the flue gas direction. Every terminal is supplied with the report including the calibration constant. On request, is possible to supply the Accredia certification Terminale Pitot Type S - Out stack filter To be used with filterholder placed in the heated box Terminale Pitot Type S - In stack filter To be used with filterholder placed in front of the probe Terminale Pitot Type S - 2 stages impactor To be used with multi-stage impactor Digital Inclinometer This option allows a fast and easy determination of the swirl angles to be entered in the ST5 for the evaluation of the cyclonic flow. This battery rechargeable device can be fixed to the hub with its support and lets your hand free to turn the probe for the 0 dp point Digital Protractor for HP5 probe

4 Particulate Matter collection devices Glass/Quartz Filterholder for 47mm flat membranes. The filtering membrane is allocated inside the titanium filterholder cassette which makes it very fast and practical to change. Geometry and wide tight surface decrease the risk of accidental filter breaking Filterholder d. 47mm glass Filterholder d. 47mm quartz Glass/Quartz Filterholder for 25x100mm thimbles Available in borosilicate glass and quartz Glass thimbleholder 25x100 mm Quartz thimbleholder 25x100 mm Titanium filterholder for 47mm flat membranes Completely made of Titanium gr.2. Connections are realized with joints equipped with 8mm PTFE nuts Titanium filterholder d. 47mm and locking wrench Spare parts and consumables Spare cassette d. 47mm Compatible with all filterholders d.47mm Set of 10 pcs gaskets for 47mm filterholder Compatible with all filterholders d.47mm Set of 10pcs 8mm PFTE nuts Box of 25 Quartz microfibers binderless 25x100mm thimbles Box of 25 Glass microfibers binderless 25x100mm thimbles Box of 25 Quartz microfibers binderless 25x100mm membranes Box of 25 Glassmicrofibers binderless 25x100mm membranes

5 HUB HP5 HUB HP5 is the connecting device for all the items composing the heated sampling probe. Inside the box, are placed the different filtering devices made of titanium, quartz or glass. The Hub is built in AISI304 stainless steel and aluminum, with protection painting The thick insulation allows to operate at temperatures of C The locking system of the hub allows to place the probe/pitot in vertical or horizontal position. Moving the probe is easier and safthanks to the two handlings easy HUB for Heated Probe Athermal rack for impingers Allows the connect directly, and without tubing, the hot filterholder to the impinger train, as requested by EPA5 or by the most recent EN methods for the determination of micropollutants in flue gas emission. The box is fixed directly to the Hub without using any screws or bolts. It s built in AISI304 stainless steel and aluminum while the impinger cooling bath is made in polypropilene. The cover is made to protect and insulate the box for a safe and practical transport back to the laboratory Athermal Box for impingers Mousse and support for 500cc impingers Filterholder for side stream methods Glass/Quartz 47 mm Filterholder with side stream option Allow to extract an aliquot of sample inside in the heated box in compliance with international methods asking for one or more derivation of the main isokinetic stream Available in both glass and quartz mm glass filterholder with side stream mm quartz filterholder with side stream Side stream splitters To be used with the filterholder with side stream Single derivation Double derivation Derivation for 47mm Titanium Filterholder

6 Inner tubes and calibrated nozzles Designed to be quickly changed, also on the field, and allow easy and fast rinsing and recovery Inner tubes - material : Titanium grade Inner HP5 Tit gr2 Lenght 0.5 m Inner HP5 Tit gr2 Lenght 1.0 m Inner HP5 Tit gr2 Lenght 1.5 m Inner HP5 Tit gr2 Lenght 2.0 m Inner HP5 Tit gr2 Lenght 2.5 m Inner HP5 Tit gr2 Length 3.0 m Gooseneck curve Ti gr Set of 5 interchangeable nozzles Ti gr2 Available diameters : Set of 10 interchangeable nozzles Ti gr2 Available diameters : Inner tubes made of : Borosilicate Glass and Quartz Inner HP5 glass Lenght 0.5 m Inner HP5 glass Lenght 1.0 m Inner HP5 glass Lenght 1.5 m Inner HP 5 glass Lenght 2.0 m Inner HP5 glass Lenght 2.5 m Inner HP5 glass Lenght 3.0 m Inner HP5 quartz Lenght 0.5 m Inner HP5 quartz Lenght 1.0 m Inner HP5 quartz Lenght 1.5 m Inner HP5 quartz Lenght 2.0 m Inner HP5 quartz Lenght 2.5 m Inner HP5 quartz Lenght 3.0 m Set of 5 interchangeable nozzles Glass Available diameters: Set of 2 interchangeable nozzles Quartz Available diameters: Union Tee d10 for glass/quartz tubes complete of 1 PTFE nuts Nuts PFTE diam.10 (set 10 pcs)

7 Condenser and Trap FC5 for PCDD/PCDF and PAH The FC5 condenser is built in accordance with the requirements defined in the EN1948 for the Filter/condenser method and to EPA23 with the dedicated option to invert the cartridge with the water flask. The trap is equipped with a glass support for the use of PUF or XAD2. The device is extremely compact, the adsorbing trap allocated inside the cooling device, this allow an increased cooling capability, UV protection and damage protection. The FC5 is supplied with a shock proof case. Spare parts and Consumables FC5 condenser kit, including : - condenser - XAD2/PUF trap - 1 liter flask - Glass Connection and fitting - Transport case XAD2/PUF Trap in amber glass liter bottle with GL45 cap