S8PS Power Supplies will be Discontinued March 31, 2008; Use S8VM Models Instead
|
|
|
- Joanna Anderson
- 5 years ago
- Views:
Transcription
1 NO: SD-049 PRODUCT: S8PS Power Supplies DATE: September 2006 TYPE: Discontinuation Notice S8PS Power Supplies will be Discontinued March 31, 2008; Use S8VM Models Instead When Omron discontinues S8PS in March 2008, use S8VM. Note these important differences: Overall and Mounting dimensions changed. Cooling method has changed: 300W: Natural air-cooling is changed to a forced-air cooling with a built-in fan. 600W: Cooling air blows out from front surface with S8PS while from back surface with S8VM. Terminal for I/O wiring has changed: 50W: Screw size is changed from M4 to M W/150W: Input screw size is changed from M4 to M W: Output screw size is changed from M4 to M5. Overload protection has changed: S8PS-600W: Turns OFF when continuous for 5s min. and reset to apply the input voltage again. S8VM-600W: Inverted L drop type, automatic reset Startup time is shorter: 50/100/150W: Changed from 1000 ms max. to 800 ms max. 300/600W: Changed from 1500 ms max. to 1000 ms max. Discontinued Parts and Suggested Replacements Configuration Power Ratings Discontinued model Openframe Bottom- 50 W S8PS S8VM type mounting S8PS S8VM (See note) S8PS S8VM W S8PS S8VM W S8PS S8VM DIN Rail 50 W S8PS-05005D S8VM-05005D Mounting S8PS-05012D S8VM-05012D S8PS-05024D S8VM-05024D 100 W S8PS-10024D S8VM-10024D 150 W S8PS-15024D S8VM-15024D Covered Bottommounting 50 W S8PS-05005C S8VM-05005C type S8PS-05012C S8VM-05012C (See note) S8PS-05024C S8VM-05024C 100 W S8PS-10024C S8VM-10024C 150 W S8PS-15024C S8VM-15024C 300 W S8PS-30024C S8VM-30024C 600 W S8PS-60024C S8VM-60024C DIN Rail 50 W S8PS-05005CD S8VM-05005CD Mounting S8PS-05012CD S8VM-05012CD S8PS-05024CD S8VM-05024CD 100 W S8PS-10024CD S8VM-10024CD 150 W S8PS-15024CD S8VM-15024CD 300 W S8PS-30024CD S8VM-30024C and S82Y-VM30D (Bracket for ) Note: S8PS: Bottom mounting is possible with the accessory mounting bracket supplied with unit. S8VM: A mounting bracket has to be ordered separately for bottom mounting.
2 Dimension/Mounting Dimension <50W models> S8PS-050 S8PS-050 C <50W models> S8VM-050 S8VM-050 C (Note) S8PS: Bottom mounting is possible with the attached accessory mounting bracket. S8VM: A mounting bracket has to be ordered separately for bottom mounting. S8PS-050 D S8PS-050 CD S8VM-050 D S8VM-050 CD
3 Dimension/Mounting Dimension <100W models> S8PS S8PS-10024C <100W models> S8VM (Note) S8PS: Bottom mounting is possible with the attached accessory mounting bracket. S8VM: A mounting bracket has to be ordered separately for bottom mounting. S8VM-10024C S8PS-10024D S8PS-10024CD S8VM-10024D S8VM-10024CD
4 Dimension/Mounting Dimension <150W models> S8PS S8PS-15024C <150W models> S8VM S8VM-15024C (Note) S8PS: Bottom mounting is possible with the attached accessory mounting bracket. S8VM: A mounting bracket has to be ordered separately for bottom mounting. S8PS-15024D S8PS-15024CD S8VM-15024D S8VM-15024CD
5 Dimension/Mounting Dimension <300W models> S8PS-30024C <300W models> S8VM-30024C (Note) S8PS: Bottom mounting is possible with the attached accessory mounting bracket. S8VM: A mounting bracket has to be ordered separately for bottom mounting. S8PS-30024CD <Combination of S8VM-30024C + S82Y-VM30D (DIN bracket)>
6 Dimension/Mounting Dimension <600W models> S8PS-60024C <600W models> S8VM-60024C (Note) S8PS: Bottom mounting is possible with the attached accessory mounting bracket. S8VM: A mounting bracket has to be ordered separately for bottom mounting.
7 Terminal Arrangement/Wiring Connection 50-W Models 100-/150-W Models 300-W Models 600-W Models 1 DC Output Terminals: Connect the load lines to these terminals. 2 Input Terminals: Connect the input lines to these terminals. Note: A fuse is inserted into the AC(L) side 3 Ground Terminal (GR): Connect a ground line to this terminal. 4 Output Indicator (DC ON): Lights (green) while a Direct Current (DC) output is ON. 5 Output Voltage Adjuster (V.ADJ): It is possible to increase or decrease the output voltage by 5% to 10%. 6 Protection-ON Alarm Indicator: The red indicator will be lit if the overvoltage (for a 300-/600-W model) or overheat protection (for a 600-W model) circuit is triggered.
8 Terminal Arrangement/Wiring Connection
9 Terminal Arrangement/Wiring Connection
10 Characteristics Supply Voltage All models in common: Free input 100 to 240VAC (85 to 264VAC) All models in common: Free input 100 to 240VAC (85 to 264VAC) Inrush current All models in common: 25A TYP at 100VAC 50A TYP at 200VAC Note: 25 C, cold start 17.5A TYP at 100VAC 35A TYP at 200VAC 20A TYP at 100VAC 40A TYP at 200VAC Note: 25 C, cold start Startup time 1000ms max. 1500ms max. 800ms max. 1000ms max. Hold time 20ms min. 20ms typ (15ms min.) Overload protection 50/100/150/300W models 105% (300W: 101% min.) of rated load current, voltage drop, intermittent, automatic reset 600W models 105% min. of rated load current, inverted L drop type (Turns OFF when continuous for 5s min.) 105% of rated load current, inverted L drop type, automatic reset 300W models 105% (24V: 120% min.) of rated load current, inverted L drop type, automatic reset 600W models 105% (24V: 115% min.) of rated load current, inverted L drop type, automatic reset All capacities in common 5V: intermittent Parallel operation Cooling method Accessories No Yes, up to 2 units 50/100/150/300W models Natural air-cooling 600W models Forced-air cooling with a built-in fan (Cooling air blows out from anterior surface) <Accessories> bracket: Included to type Replacement fan: S82Y-JFAN (for 600W) When S8PS is mounted with a bottom-mounting bracket attached, please also use a bottom-mounting bracket (Ordered separately) for S8VM. No Yes, up to 2 units (It is necessary to connect CB pin and CBG pin.) Natural air-cooling Forced-air cooling with a built-in fan (Cooling air blows out from anterior surface) <Order separately> Bottom mounting bracket: S82Y-VM10B (for 50W) S82Y-VM20B (for 100/150W) S82Y-VM30B (for 300W) S82Y-VM60B (for 600W) Horizontal bottom mounting bracket: S82Y-VM30S (for 300W) S82Y-VM60S (for 600W) Front mounting bracket: S82Y-VM10F (for 50/100/150W) S82Y-VM30F (for 300W) S82Y-VM60F (for 600W) DIN Rail mounting bracket: S82Y-VM30D (for 300W) S82Y-VM60D (for 600W) Replacement fan: S82Y-VM30FAN (for 300W) S82Y-VM60FAN (for 600W)
Product Discontinuation Notices. Discontinuation Notice of Switch Mode Power Supply S82J series. Wire connection. Mounting Dimensions
PRODUCT NEWS Product Discontinuation Notices February 1, 2010 Power Supplies No.2010029E Discontinuation Notice of Switch Mode Power Supply Product Discontinuation Switch Mode Power Supply Recommended
Switching Power Supply
Switching Power Supply Miniature DIN-track Mounting DC-DC Power Supplies 3- and 7.5-W models. Inputs: 10 to 27 VDC (DC input) Outputs: 5, 12, 15, 24, ±12, and ±15 V. 65 mm depth enables mounting onto panels
Input voltage Power rating Output voltage Output current With Front mounting Bracket. With DIN-rail mounting Bracket 400/480 VAC
Three-phase Input Switch Mode S8PE DIN-rail mounting, 3-phase input Switch mode Supply with a range of 5A to 40A output current 3 phase 400/480 or 200/230 VAC input 5, 10, 20 and 40A; 24 VDC output Higher
Ordering Information. Switching Power Supply S82F. Industrial-Grade Power Supply for General or Peak Load Applications SWITCHING POWER SUPPLIES
Switching Power Supply S82F Industrial-Grade Power Supply for General or Peak Load Applications Correct input voltage range is automatically selected: 1 VAC or 2 VAC. Model S82F-P is suitable for peak
Switching Power Supply
Switching Power Supply Easy-to-use Industrial Power Supply with Versatile Functions (); Power Supply Suitable for Peak Loads such as Motors and Solenoids (-P) Remote control function incorporated. Remote
Switch Mode Power Supply S8VS
Switch Mode Power Supply S8VS Monitor Functions for Replacement Timing and Total Run Time in a Compact Size. 180-W Models added to the series. Compact size (40 (W) 95 (H) mm) (60-W Models) Large 3-digit,
Power Supplies. Power Supplies. PS5R Standard Series. PS5R Standard Series Switching Power Supplies
Standard Series Standard Series Switching Part Numbers Part Number Item Watts Rated Voltage Rated Current -A V DC 1.A -A 7. V DC.6A -A24 24V DC.3A -B V DC 2.A Key features of the standard series include:
Basic Characteristics Data
Basic Characteristics Data Basic Characteristics Data Model Circuit method Switching frequency [khz] Input current [A] Rated input fuse Inrush current protection circuit Material PCB/Pattern Single sided
Basic Characteristics Data
PLA Basic Characteristics Data Basic Characteristics Data Model Circuit method Switching frequency [khz] Input current [A] Rated input fuse Inrush current protection circuit Material PCB/Pattern Single
Power ratings Input voltage Output Voltage Output current Boost Current Model number 120 W 2-phase and 3-phase
New Product Switch Mode Power Supply S8VK-T (120/240/480/960 W Models) Worldwide 3-phase Power Supply Resistant in tough environments Easy and fast installation The most compact class on the market Wide
Power ratings Input voltage Output Voltage Output current Boost Current Model number 120 W 2-phase and 3-phase
New Product Switch Mode Power Supply S8VK-T (120/240/480/960 W Models) Worldwide 3-phase Power Supply Resistant in tough environments Easy and fast installation The most compact class on the market Wide
Power Supplies. PS5R Standard Series. PS5R Standard Series Switching Power Supplies Part Numbers
Standard Series Key features: Wide power range: 7.W-4W Universal input : 7.W-W: 8-264V /1-37V DC W: 8-2V /17-264V 24-37V DC (selectable) W, W, 24W: 8-264V /11-3V DC 4W: 3 phase: 32- V 3 phase: 3- V Overcurrent/overvoltage
Basic Characteristics Data
Basic Characteristics Data Basic Characteristics Data Model Circuit method Switching frequency [khz] Input current [A] Rated input fuse Inrush current protection circuit Material PCB/Pattern Single sided
S8VK-S (30/60/120/240/480-W Models)
New Product Switch Mode Power Supply S8VK-S (3/6/1/2/48-W Models) A Perfect Fit for Small Control Panels Coated PCBs for Better Resistance to Environment Connections for Easy Wiring Operation possible
PEL power supplies. 24 Vdc 18 Vdc 12 Vdc SWITCHED MODE POWER SUPPLIES/ PEL SERIES
power supplies Our powerful miniature units ensure optimum power supply for miniature controllers. Versions with a 12, 18 and 24 V output voltage are available, enabling them to be used in a whole range
Power Supplies. SDN-C Compact DIN Rail Series
SDN-C Compact DIN Rail Series The SDN-C DIN rail power supplies are the next generation of the popular SDN series. These models combine high effi ciency and compact size with new visual diagnostic LEDs
PS5R-S. Switching Power Supplies
TREICHL-ATM Electronic Auf der Bült 1-12 D 41189 Mönchengladbach Tel. 2166 8545 Fax 2166 8547 email: atm@treichl.de internet: www.atm-treichl.de PS5R-S Switching Power Supplies Class Create More Space
NEW The new PROmax power supplies offer a wide range of robust solutions for demanding application requirements.
Datasheet Single- and three-phase switched-mode power supply units NEW The new power supplies offer a wide range of robust solutions for demanding application requirements. C SEMI F47 US Designed for high
Specifications 2019-V AC-DC Din Rail Mounted Power Supply IS-70 Series, 70W
2019-V1.0-0318 Specifications AC-DC Din Rail Mounted Power Supply IS-70 Series, 70W No. 545 Museum Road Yangzhou, Jiangsu China 225009 Tel: 86 (514) 8279 1592 Fax: 86 (514) 8769 3159 2019 AC-DC Din Rail
D R C- 4 0 s e r i e s
LPS Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 2000000000 Features Universal AC input / Full range Protections: Short circuit / Overload / Over voltage Battery low protection /
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS 40, 60, 80 kva (three phase input and output) GENERAL DATA Output Rated Power kva 40 60 80 Output Power Factor 0.8 Topology Technology Construction Parallel Configuration Redundant
RWS50B RWS100B RWS150B RWS300B RWS600B
RWS-B Series 50W to 600W Single Output General Purpose Power Supplies Features 10 Year e-cap Lifetime 7 Year Warranty Global Safety Approvals Compact Size Better Field Reliability Lower Cost of Ownership
Basic Characteristics Data
Basic Characteristics Data Basic Characteristics Data Model GHA3F GHA5F Circuit method Switching frequency [khz] boost chopper 6-22 LLC resonant converters 9-1 boost chopper 6-22 LLC resonant converters
Ordering Information. DC Backup Block for S8TS S8T-DCBU-01. DC Backup Block (See note 1.) Bus Line Connector. Basic Block. Battery Holder.
DC Block for S8TS CSM DS_E_8_2 DC Block for S8TS Prevents 24-VDC Outages Due to Power Interruptions or Failures Supplies 24 VDC for a fixed period of time even during AC input outages to considerably improve
Specifications 2019-V AC-DC Din Rail Mounted Power Supply IS-480 Series, 480W
2019-V1.0-0118 Specifications AC-DC Din Rail Mounted Power Supply IS-480 Series, 480W No. 545 Museum Road Yangzhou, Jiangsu China 225009 Tel: 86 (514) 8279 1592 Fax: 86 (514) 8769 3159 2019 AC-DC Din Rail
LS200 Series Instruction Manual
LS200 Series Instruction Manual BEFORE USING THE POWER SUPPLY UNIT Pay attention to all warnings and cautions before using the unit. Incorrect usage may lead to an electrical shock, damage to the unit
ECP180 Series. Low 1 Profile. High Power Density. 2.0 by 4.0 Footprint. 120W Convection-cooled Rating. 180W Force Cooled Rating
ECP180 Series Low 1 Profile High Power Density 2.0 by 4.0 Footprint 120W Convection-cooled Rating 180W Force Cooled Rating Medical & ITE pprovals Class I and Class II pplications High Efficiency, up to
UCS-CHR24V55W. Combined Power Supply & Battery Charger. Data Sheet
Combined Power Supply & Battery Charger Data Sheet INTRODUCTION UCS-CHR24V55W is a combined charger and power supply with dedicated outputs for both charging and power supply. With a large input range
3. SERVICE TOOLS Inverter checker RSUK09-17 CLIMATE COMFORT. All Seasons. Heating. Air Conditioning. Applied Systems.
All Seasons CLIMATE COMFORT Heating 3. SERVICE TOOLS 3.2. Inverter checker RSUK09-17 Air Conditioning Applied Systems Refrigeration 3.2. Inverter checker RSUK09-17: index 1. Outlook 2. How to connect?
DC Backup Block for S8TS
DC Backup Block for S8TS DC Backup Block for S8TS for Preventing 24 VDC Outages due to Instantaneous Power Failures Supplies 24 VDC for a fixed period of time even during AC input outages to considerably
INDUSTRIAL POWER SUPPLIES SFL-SERIES
INDUSTRIAL POWER SUPPLIES SFL-SERIES Operating Instructions 1. Application The SFL-series are compact, rugged switching power supplies designed for applications in process automation and other industrial
Power Supplies. Automation & Sensing. Selection Guide
Automation & Sensing Selection Guide... 14 PS5R Slim Line Series... 141 Part Numbers... 142 Specifications... 143 Dimensions and Terminal Markings... 145 PS5R Standard Series... 147 Part Numbers... 147
Models. Output current max.* Output Power max. Low Line : VAC High Line: VAC 24 VDC / 12 A 240 W. Back up battery
AC/DC Battery Controller Power Supply TSPC-240UPS Series Compact universal 24 VDC power supply with integrated battery controller module Battery protection for over voltage, deep discharge, short circuit
SYSDrive Frequency Inverter
SYSDrive Frequency Inverter T V/f control T PID control T Standard LED, optional LCD operator T Fieldbus options: DeviceNet T 7 configurable digital inputs T 3 configurable digital outputs T Low audible
1 Terminal Block A-22
1 Terminal Block A-22 2 Function 2.1 Input voltage range 2.2 Inrush current limiting 2.3 Overcurrent protection 2.4 Overvoltage protection 2.5 Thermal protection 2.6 Output voltage adjustment 2.7 Remote
TeSys contactors 5. Characteristics 5. Mini-contactors TeSys LC1 SK and LP1 SK. Environment Rated insulation voltage (Ui) 5/30
Characteristics TeSys contactors Mini-contactors TeSys LC SK and LP SK Environment Rated insulation voltage (Ui) Conforming to 0, VDE 00 gr C,BS, CSA - n, UL 0 V 0 Conforming to standards IEC 0, NF C -0,
DEVICE STATE/BYPASSED FAILURE OVERLOAD
Technical specifications Type 5. 7. Control electronics Rated values Terminal Rated control supply voltage A1A2 V AC 115 230 115 230 Tolerance % -15+10-15+10 Rated control supply STANDBY ma 15 15 Rated
Solar Inverter Manual
Solar Inverter Manual Introduction SMPS series solar inverter power charging efficiency increased by 30%~60% than traditional controller charging. This inverter has automatic identification, three-stage
Startup Troubleshooting
Startup Troubleshooting Model No.: Unit S/N: ATTENTION: Before applying power, meter your load wire for the presence of AC voltage (Should be at 0 ). Contact Person: Date MM/DD/YY Phone 1: Time Battery
PRODUCTS: POWER SUPPLY
PRODUCTS: POWER SUPPLY Impact Lighting Inc. All rights reserved. Impact Lighting Inc. Reserves the right to change specifications without notice. 138 POWER SUPPLY 15W AC-DC [12V/1.25A] UNIVERSAL POWER
Ceramic PTC Thermistor:
Motor Starter In starter circuit for single-phase a.c. motor, CPTC thermistor is in series connection with starting winding of motor. When motor starts, initial resistance of CPTC thermistor is low and
(with Class-1 AC resistive load) 3. G3PB-215B-2N-VD kW max. (25 A) G3PB-225B-3N-VD 2. G3PB-225B-2N-VD kw max. (35 A) G3PB-235B-3N-VD 2
Solid-state Contactor (New Heat Sink Construction) G3PB Space and working time saved with new heat sink construction. Series now includes 480-VAC models to allow use in a greater range of applications.
18.5. Electrical Circuits and Safety
18.5 Electrical Circuits and Safety Electrical Circuits An electric circuit is a complete path through which a charge can flow. This is called a closed circuit. When the electric current cannot flow, this
Switch Mode Power Supply S8JC-Z / S8JC-ZS / S8JX-G / S8JX-P / S8VK-G / S8VK-C. Power Supply Selection Guide
Switch Mode Supply S8JC-Z / S8JC-ZS / S8JX-G / S8JX-P / S8VK-G / S8VK-C Supply Selection Guide OMRON Supply Selection Guide Suitable for various situations from Machine to DIN Rail-mounting type General
MODEL SELECTION TABLE Open Frame Models. MODEL SELECTION TABLE U-Chassis Models. MODEL SELECTION TABLE Enclosed Models
Open Frame ( O Type) U-Chassis ( U Type) Enclosed ( C Type) DIN Rail Kit ( DN Type) Size: 5in x 3in x 1.16~1.24in (127mm x 76.2mm x 29.5~31.5mm) Size: 5in x 3~3.23in x 1.5in (127mm x 76.2~82.2mm x 38.1mm)
ZWD100PAF Series Instruction Manual
Instruction Manual BEFORE USING THE POWER SUPPLY UNIT Pay attention to all warnings and cautions before using the unit. Incorrect usage could lead to an electrical shock, damage to the unit or a fire hazard.
ZWD225PAF Series Instruction Manual
Instruction Manual BEFORE USING THE POWER SUPPLY UNIT Pay attention to all warnings and cautions before using the unit. Incorrect usage could lead to an electrical shock, damage to the unit or a fire hazard.
This manual is to be given to the end user. Optional RFI filter. Drive. Stop. Thermal protection device. Start / Reset +DC.
3943 en - 2013.12 / c Optional RFI filter This manual is to be given to the end user Main contactor power supply Start / Reset Stop Thermal protection device Drive +DC BR Braking resistor DIGIDRIVE SK
1333 (SERIES B & C) TROUBLESHOOTING GUIDE
1333 (SERIES B & C) TROUBLESHOOTING GUIDE Preventive Maintenance: Problems with Your Drive? Bulletin 1333 is convection or fan cooled by air flowing through the heat sink slots. The slots must never be
Technical Data Sheets
GE Consumer & Industrial Power Protection Technical Data Sheets Digital Energy Uninterruptible Power Supply SitePro 150 200 250 300 kva 400 VAC CE Series 6 Manufactured by: GE Digital Energy General Electric
AC-DC POWER SUPPLY SINGLE OUTPUT, DESK TOP, 130 WATTS MEDICAL APPLICATIONS MUIG130 SERIES
AC-DC POWER SUPPLY SINGLE OUTPUT, DESK TOP, 130 WATTS MEDICAL APPLICATIONS SERIES FEATURES Active PFC Function CEC Compliance RoHS Compliance Over Voltage Protection Built-in Over Current Protection Built-in
Technical Data Sheet. Uninterruptible Power Supply. Critical Power. imagination at work
Technical Data Sheet Uninterruptible Power Supply TLES_040-120_S1_UPS_GE_Floor_01 GE Consumer & Industrial SA General Electric Company CH 6595 Riazzino (Locarno) Switzerland T +41 (0)91 / 850 51 51 F +41
Basic Characteristics Data
asic haracteristics Data asic haracteristics Data Model ircuit Switching frequency [KLz] KLE12F KLN12F ctive filter Flyback converter 4-16 2-15*2 KLE24F ctive filter 5-7 KLN24F Forward converter 13 Input
Insulation method Zero-cross function Indicators Applicable output load Model number Phototriac coupler Yes Yes (See page 6) Main Circuit
SSR with Failure Detection Function Detects failures in SSRs used for heater temperature control and simultaneously outputs alarm signals. This product supports the safe design of heater control systems,
Technical Data Sheets
GE Consumer & Industrial Power Protection Technical Data Sheets Digital Energy Uninterruptible Power Supply SitePro 400 & 500 kva 400 VAC CE Series 6 Manufactured by: GE Digital Energy General Electric
RSS Series Panel Mount Solid State Relays. 4,000 RMS (minute)
RSS Series Panel Mount Solid State Relays Key features of the RSS series include: Photo isolation 1,200 volt blocking voltage 4,000 volt optical isolation Zero voltage turn-on 100% tested at rated current
Solar Hybrid Inverter SP Brilliant Series
User Manual Solar Hybrid Inverter SP Brilliant Series Version: 1.5 Table Of Contents ABOUT THIS MANUAL... 1 Purpose... 1 Scope... 1 SAFETY INSTRUCTIONS... 1 INTRODUCTION... 2 Features... 2 Basic System
Power Conversion Systems 2005/2006. Schaefer the Power to make it happen.
Power Conversion Systems 2005/2006 Schaefer the Power to make it happen. Company profile workforce experience customer orientation flexibility reliability Schaefer Elektronik, founded in 1969, has grown
MD60 Series 60W DINergy Power Supply
MD60 Series 60W DINergy Power Supply Features Compact size, high efficiency and DIN Rail mounting 60 C rated provides full power/no derating required 100-240VAC wide-range auto-selection input Overcurrent,
9.1.4 Troubleshooting of Faults in LCD Screen
User Manual 9 and Maintenance 9.1.2 Arc Detection Self-test An auto-test circuit is included in the module design of the inverter s AFDI function. If a DC arc fault is detected, the corresponding fault
Industrial Power Supplies
, Features Switch Mode Power Supplies for DIN-rail Mounting 6 Power Ranges with 2, 3, 6, 12, 20 and 24 A Current (24 VDC Models) Selectable 115/ 230 VAC Input Very low Ripple and Noise EMI complies with
PS6R 480W Switching Power Supply
ew Series PS6R 4W Switching Power Supply Reduced size and high efficiency cuts operating costs. Energy-saving 93% Efficiency Space-saving 85mm wide Efficiency (%) 96 94 92 88 86 84 82 Competitor A Competitor
Commander SK. Technical Data Guide. Model sizes A to D and 2 to 6. AC variable speed drive for 3 phase induction motors
Technical Data Guide Commander SK sizes A to D and 2 to 6 AC variable speed drive for 3 phase induction motors Part Number: 0472-0002-09 Issue: 9 www.controltechniques.com Information The manufacturer
Basic Characteristics Data
Basic Characteristics Data Basic Characteristics Data Model EA12F NA12F EA24F NA24F Circuit method Switching frequency [z] Active filter 4-1 Flyback converter 2-15*2 Active filter 5-7 Forward converter
Power Supply Technical Information
Supply Technical Information supplies Supply Overview What is a Supply? Commercial AC power distributed from power plants cannot be supplied directly to the ICs and other electronic components built into
Solar off-grid Inverter. SP Junior Series. User Manual
Solar off-grid Inverter SP Junior Series User Manual Contents 1 PREFACE... 3 1.1 Glossary... 3 2 INTRODUCTI... 3 2.1 Description... 3 2.2 Features... 3 2.3 Appearance... 3 3 INSTALLATI... 4 3.1 Safety...
EMERGENCY VEHICLE BATTERY MANAGER PS2024
EMERGENCY VEHICLE BATTERY MANAGER PS2024 2 The PS2024 (Fig. 1) is designed as a on-vehicle battery charger / battery charge state monitor. While the vehicle is at its base or station, the charger is connected
Output Current Input Current Over Load VDC VDC ma ma(typ.) ma(typ.) VDC μf %
Doc. EC-0093 FEATURES Industrial Standard 2"x1" Package Ultra-wide Input Range 9-36VDC, 18-75VDC, 40-160VDC I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp. Range -40 C to +88 C
Product discontinuation. Notices. Measuring / Motor Protective Relays. Discontinuation Notice of Single-phase Voltage Relay K8AB-VW[].
![Product discontinuation. Notices. Measuring / Motor Protective Relays. Discontinuation Notice of Single-phase Voltage Relay K8AB-VW[].](/thumbs/90/101381475.jpg "Product discontinuation. Notices. Measuring / Motor Protective Relays. Discontinuation Notice of Single-phase Voltage Relay K8AB-VW[].")
PRODUCT NEWS Product Discontinuation Notices Measuring / Motor Protective Relays Issue Date December 2, 2013 No. 2013E018C Discontinuation Notice of Singlephase Voltage Relay K8ABVW[]. Product Discontinuation
DRB-1 Series Instruction Manual
Instruction Manual BEFORE USING THE POWER SUPPLY UNIT Pay attention to all warnings and cautions before using the unit. Incorrect usage could lead to an electrical shock, damage to the unit or a fire hazard.
TOWER MAXI T SINGLE CONVERSION ON LINE UPS SYSTEMS
INSTRUCTION MANUAL TOWER MAXI T SINGLE CONVERSION ON LINE UPS SYSTEMS September 2000 TOWER UPS DISTRIBUTION (PTY) LTD 1 1. INTRODUCTION T A B L E O F C O N T E N T S 1.1 General Description... 3 1.2 Features...
QUINT-PS/24DC/24DC/20
DC/DC converter with SFB Technology, primaryswitched, input: 24 V DC, output: 24 V DC, output current: 20 A Data sheet 104791_en_01 PHOENIX CONTACT 20130405 1 Description QUINT DC/DC converter maximum
SOLAR INVERTER/CHARGER SOLAR INVERTER/CHARGER MPPT 2KVA- 3KVA. Appliances. Airconditioning Fridge. Washing machine
SOLAR INVERTER/CHARGER SOLAR INVERTER/CHARGER MPPT 2KVA- 3KVA Appliances 420-00288-01 PC TV Airconditioning Fridge Washing machine Table Of Contents ABOUT THIS MANUAL...1 Purpose... 1 Scope... 1 SAFETY
QUINT-PS/24DC/48DC/ 5
DC/DC converter with SFB technology, primaryswitched, input: 24 V DC, output: 48 V DC, output current: 5 A Data sheet 104793_en_01 PHOENIX CONTACT 20130503 1 Description QUINT DC/DC converter maximum system
Power Supplies. PS6R Series Switching Power Supplies. Expandable and space-saving switching power supplies. High efficiency reduces operation costs.
Switching Expandable and space-saving switching power supplies. High efficiency reduces operation costs. 93% efficiency Plug-in output modules for additional output voltages Plug-in branch terminal module
8BVE0500HW General information. 2 Order data 8BVE0500HW
8BVE0500HW00.000- General information For distributing the DC bus power supply and 4 VDC auxiliary supply to multiple mounting plates For setting up decentralized units in the ACOPOSmulti drive system
Power Inverter. User s Manual. Diamond Series CPD1200EILCD
Power Inverter Diamond Series CPD1200EILCD User s Manual 2 TABLE OF CONTENTS 1 IMPORTANT SAFETY INSTRUCTIONS..4 2 INSTALLATION....5 2-1 Unpacking...5 2-2 Product Overview & Outlook..5 2-3 Power Requirements
QS20.241, QS C1
QS2.21, QS2.21C1 QSeries 27. APPLICATION NOTES 27.1. REPETITIVE PULSE LOADING Typically, a load current is not constant. It varies over time. For pulse load compatibility, following rules must be met:
TABLE OF CONTENTS. Understanding the Troubleshooting Instructions...2 Signal Light...2 Harness Connections...2 Inspection...2
TRIPP Model D ELECTRICAL TABLE OF CONTENTS Understanding the Troubleshooting Instructions...2 Signal Light...2 Harness Connections...2 Inspection...2 LVDT Setup/Adjustments...2 Basic Troubleshooting...3
QUINT-PS/24DC/24DC/10
DC/DC converter with SFB Technology, primaryswitched, input: 24 V DC, output: 24 V DC, output current: 10 A Data sheet 104790_en_01 PHOENIX CONTACT 20130405 1 Description QUINT DC/DC converter maximum
All In one uninterruptible power supply solutions
All In one uninterruptible power supply solutions For the life of your systems with Battery Care concept Integrated Electronic Solution Yet another strong proposition from Adelsystem, result of the continuing
PRODUCT SPECIFICATION File: EA-520H1U-01 Date: Apr., 7, 2005
SWITCHING POWER SUPPLY Page: 1 of 1 1. SCOPE 2 2. AC INPUT 2 3. DC OUTPUT 2 3.1 VOLTAGE and CURRENT LOAD RANGES 2 3.2 OUTPUT RIPPLE and NOISE 3 3.3 DYNAMIC DC OUTPUT CHARACTERISTICS 3 3.4 DC OUTPUT ON/OFF
HPP1 MK6-15A/20A R00 Owners Manual
J Wolmarans Page 1 2018/10/23 Page 1 of 7 TABLE OF CONTENTS Page 1 Introduction...2 2 Model...2 3 Safety warnings...2 4 Contents...2 5 Features...2 6 Installation...3 6.1 Mounting the unit:...3 6.2 Connecting
ConceptpowerTM Modular kVA
TECHNICAL SPECIFICATIONS ConceptpowerTM Modular 10-15-20-30-40kVA Uninterruptible Supply (UPS) Modular, n+1 redundant, three-phase On-line, Double-Conversion, VFI Classic-Line 10-40kVA Gemini-Line 10-30kVA
DC POWER SUPPLY SYSTEMS
DC POWER SUPPLY SYSTEMS double branch Rectifier - SCR type TITANIUM 2R-SCR PLUS SERIES TITANIUM 2R-SCR rectifier series belongs to the Double Branch category thus provided with two independent AC / DC
Data sheet. CI-tronic Soft start motor controller Type MCI 3, MCI 15, MCI 25, MCI 30 I-O, MCI 50 I-O 520B1443
CI-tronic Soft start motor controller Type MCI 3, MCI 15, MCI 25, MCI 30 I-O, MCI 50 I-O December 2002 DKACT.PD.C50.G2.02 520B1443 2 DKACT.PD.C50.G2.02 Danfoss A/S 12-2002 Introduction The MCI soft starters
POWER+ PREMIUM CBS. BS-EN Emergency electrical installations Electric power systems Emergency lighting Escape lighting
POWER+ PREMIUM CBS CENTRALIZED Battery System BS-EN-50171 Emergency electrical installations Electric power systems Emergency lighting Escape lighting POWER+ PREMIUM CBS 10KVA-40KVA The systems running
INVERTER/CHARGERS Off-Grid Power Solutions
EVOLUTION SERIES INVERTER/CHARGERS Off-Grid Power Solutions REMOTE LOCATIONS RV/MARINE COMMERCIAL VEHICLES BACKUP POWER www.samlexamerica.com Do you need reliable AC power in a vehicle, remote location
INOVA HIGHTECH Ltd. MEP 002/003 Auto Starter Manual
INOVA HIGHTECH Ltd. MEP 002/003 Auto Starter Manual Complete Installation and Operating Manual for the MEP 002/003 Auto / Remote Starter for the following MEP Power Generators: MEP 002A/003A/011A/802A/803A/811A
SmartOnline SUT Series 3-Phase 208/120V 220/127V 20kVA 20kW On-Line Double- Conversion UPS, Tower, Extended Run, SNMP Option
SmartOnline SUT Series 3-Phase 208/120V 220/127V 20kVA 20kW On-Line Double- Conversion UPS, Tower, Extended Run, SNMP Option MODEL NUMBER: SUT20K Highlights On-line double-conversion topology, VFI operation
DC (on) LED Signal. Multiple output connector for easy wiring
DIN Rail Mount, 5 x 7.5 mm or 5 x 5 mm Wide Power Range (0W-9W) Wide Adjustment Range Rugged for Industrial Use High Efficiency Lightweight and Compact Design year warranty Short Circuit Protection Overvoltage
EXPERT 2V4SA. Temperature Controller. User s manual CLEAN MODE COMPENSATION HUMIDITY OUTSIDE TEMPERATURE
CLEAN MODE Temperature Controller User s manual CURRENT CONDITIONS ROOM TEMPERATURE PROBE TEMPERATURE OUTSIDE TEMPERATURE RELATIVE HUMIDITY STATIC PRESSURE TIME / DATE SETTINGS SET POINT / CURVE MINIMUM
PRODUCT SPECIFICATION File: EA-250U1C-10 Date: May, 25, 2005
SWITCHING POWER SUPPLY Page: 1 of 5 1. SCOPE 2 2. AC INPUT and AC OUTPUT 2 3. DC OUTPUT CURRENT LOAD RANGES 2 3.1 DYNAMIC DC OUTPUT CHARACTERISTICS 2 3.2 DC OUTPUT ON/OFF CONTROL 2 3.3 OUTPUT RIPPLE and
CX-SERIES ADVANCED BATTERY CHARGER
CX-SERIES ADVANCED BATTERY CHARGER Table of Content 1. IMPORTANT SAFETY INFORMATION... 2 1-1 General Safety Precautions... 2 1-2 Battery Precautions... 2 2. FEATURES... 3 2-1 Battery Charging Curve...
Micro-Air Corporation Route 526 Allentown, NJ 08501
EasyStart 366 Commercial (board-only) Model ASY-366-X05 (36000 BTU, 3 ton) ASY-366-X06 (72000 BTU, 6 ton) Micro-Air Corporation www.microair.net 124 Route 526 help@microair.net Allentown, NJ 08501 Contents
Technical Data Sheets
GE Digital Energy Power Quality Technical Data Sheets Digital Energy Uninterruptible Power Supply SG-CE Series 60 80 100 120 kva PurePulse 400 Vac CE Series 1 SG-CE Series 100-120 kva PurePulse SG-CE Series
QUEENSLAND URBAN UTILITIES
DOCUMENT NO : EQUIPMENT NO : PREPRED : CHECKED : PPROVED : SHEET NO : 1 of 6 GENERL 1 Battery Charger DCC Inverters 3 DCDC Converters 4 System Design Life (other than batteries) Years 5 Battery Design
Switching Power Supplies
, 18 150 Watt Features Compact boxed power supplies with screw terminal block Universal input 85-264 VAC, 50/60 Hz Short circuit and overvoltage protection High efficiency International safety approvals
VEO. V2TF01 Art.Nr.: V2TF01P Art.Nr.: TECHNICAL DATA
P Temperature monitoring (PTC) Short-circuit monitoring Supply voltage 24-240 V AC/DC 1 normally open contact Width 22,5 mm Status indication LED U: Supply voltage LED TFailure: Temperature failure TECHNICAL
TECHNICAL DATA SHEET B8033FXS kva 3Ph(In) 3Ph(Out)
TECHNICAL DATA SHEET B8033FXS 10 15 20 kva 3Ph(In) 3Ph(Out) GENERAL INFORMATION UPS Type ON LINE Double Conversion Nominal output power (Cosϕ 0.9) kva 10 15 20 Nominal output power (Cosϕ 1.0) kw 9 13.5