DC (on) LED Signal. Multiple output connector for easy wiring

Size: px

Start display at page:

Download "DC (on) LED Signal. Multiple output connector for easy wiring"

Christina Cobb
5 years ago
Views:

1 DIN Rail Mount, 5 x 7.5 mm or 5 x 5 mm Wide Power Range (0W-9W) Wide Adjustment Range Rugged for Industrial Use High Efficiency Lightweight and Compact Design year warranty Short Circuit Protection Overvoltage Protection Overload Protection Overtemperature Protection Cooling by free air convection Worldwide Approvals UL8 Listed and/or UL9- Recognized DC (on) LED Signal Multiple output connector for easy wiring Switch Select or Universal Input Easy to understand Layout Panel CE compliance UL8 Listed UL9- Recognized DIN Rail Mounting (accessory item) Rugged metal case Adjustable DC output voltage Strong DIN Rail bracket for horizontal and vertical mounting Narrow for maximized panel space Phone: Fax: Web: info@clrwtr.com

2 Serving the Automation & Control Industry since 98. Altech Power Supplies......Easy to Use & Reliable! Specifications Input Input Voltage -6V AC for the single phase -5V AC for the three phase Input Frequency: 7-6 Hz Input Current: 0.6 A to 8A Inrush Current: cold start A max Power Factor: All units are EN-- compliant General Efficiency: 7-9% (see data sheets) Isolation: 000V AC Input to Output 0V AC Input to Ground 0V AC Output to Ground Environmental Power supplies can run at % capacity inside the panel, there is no need for oversizing. See derating curves for more information. Operating Temperature: - to + C (- to + F) Operating Humidity: % RH, non-condensing Storage Temperature: - C to +85 C (- to +85 F) Vibration: G, 0 Hz to 0 khz, 0 min/cycle for minutes each axis Output Output Voltage: 5V; V; 5V; V; 8V Output Voltage Adjustment Range: ±0% Initial Set Accuracy: ±% max Ripple & Noise: See data sheet Over-voltage Protection: 5-5% Overload Protection: 05-%, constant current with auto recovery EMC & Safety Emissions: EN5/5, Class B EN--, - Voltage Flicker: EN-- ESD Immunity: EN--, level Radiated Immunity: EN--, 0 V/m EFT/Burst: EN--, level Surge: EN--5, level Conducted Immunity: EN--6, 0 V rms, Safety Approvals: EN9 UL8 UL9 CE marked Military Standard MIL-HDBK-7F Phone: Fax: Web: info@clrwtr.com 5

-W 0W Single Phase Slimline Power P Supplies W Single Output Industrial DIN Rail Power Supply Key Features Universal AC Input / Full Range NEC class / LPS compliant (Only selected models; see data

com) LED indicator for power on % full load burn-in test year warranty Input voltage range: 85-6V AC -V DC AC inrush current (typical): Cold start: A at 5V AC, A at 0V DC DC adjustment range

3 -W 0W Single Phase Slimline Power P Supplies W Single Output Industrial DIN Rail Power Supply Key Features Universal AC Input / Full Range NEC class / LPS compliant (Only selected models; see data sheet at altechcorp.com) LED indicator for power on % full load burn-in test year warranty Input voltage range: 85-6V AC -V DC AC inrush current (typical): Cold start: A at 5V AC, A at 0V DC DC adjustment range (typical): ±0% rated output voltage Overload protection (typical): 05%-% constant current limiting, auto-recovery Over-voltage protection (typical): 5%-5% rated output voltage Setup, rise, time (typical): 0ms, 0ms/0V AC 00ms, 0ms/5V AC,at full load Withstand voltage: I/P-O/P:KV AC, I/P-FG:.5KV AC, O/P-FG:0.5KV AC, Working temperature: - to + C (- to +58 F), refer to output derating curve Safety standards: UL8, EN9-* EMC standards: EN5 class B, EN--,,,5,6,8,, ENV, EN5, EN-6-, EN6- Light Industry Level**, criteria A Military Standard MIL-HDBK-7F NEW PRODUCT NEW PRODUCT NEW PRODUCT NEW PRODUCT PS-S05 5V DC A ±% mvp-p 76% PS-S V DC.67A ±% mvp-p % PS-S5 5V DC.A ±% mvp-p 8% PS-S V DC A ±% mvp-p 8% Universal Input: 85-6V AC, -V DC full range; 5V AC; 0V AC Connection: Input - poles, Output poles screw terminal + DC OK active signal Size (WxHxD):.5xxmm (0.89x.5x.9 inches) Packaging: /box; 0.8lbs / 0.9Kg W Single Output Industrial DIN Rail Power Supply PS-S05 5V DC 6A ±% mvp-p 79% PS-S V DC.A ±% mvp-p 86% PS-S V DC.7A ±% mvp-p 88% PS-S8 8V DC 0.8A ±% 0 mvp-p 88% Universal Input: 85-6V AC, -V DC full 5V AC, 0V AC Connection: Input - poles, Output poles screw terminal + DC OK relay contact Size (WxHxD): xxmm (.57x.5x.9 inches) Packaging: /box; 0.66lbs / 0.Kg W Single Output Industrial DIN Rail Power Supply PS-S05 5V DC 0A ±% mvp-p 79% PS-S V DC 5A ±% mvp-p 86% PS-S V DC.5A ±% mvp-p 88% PS-S8 8V DC.5A ±% 0 mvp-p 89% Universal Input: 85-6V AC, -V DC full 5V AC, 0V AC Connection: Input - poles, Output poles screw terminal + DC OK relay contact Size (WxHxD): xxmm (.57x.5x.9 inches) Packaging: /box; 0.7lbs / 0.Kg W Single Output Industrial DIN Rail Power Supply PS-S V DC 8A ±% mvp-p 87% PS-S V DC A ±% mvp-p 88% PS-S8 8V DC A ±% 0 mvp-p 87% Connection: Input - poles, Output poles screw terminal Size (WxHxD): 55xxmm (.7x.5x.9 inches) Packaging: /box; 0.7lbs / 0.Kg Phone: Fax: Web: info@clrwtr.com

4 Serving the Automation & Control Industry since 98. PS-S Series Curve vs. Input Voltage Ta=5 C Terminal Pin. No Assign. (TB) FG AC/N AC/L Terminal Pin. No Assign. (TB) DC OUTPUT +V DC OUTPUT -V.5 DC OK SIGNAL (VERTICAL) INPUT VOLTAGE (VAC) Hz PS-S Series Curve vs. Input Voltage Ta=5 C Terminal Pin. No Assign. (TB) FG AC/N AC/L Terminal Pin. No Assign. (TB), DC OUTPUT +V, DC OUTPUT -V 5,6 DC OK RELAY CONTACT (VERTICAL) INPUT VOLTAGE (VAC) Hz PS-S Series Curve vs. Input Voltage Ta=5 C Terminal Pin. No Assign. (TB) FG AC/N AC/L Terminal Pin. No Assign. (TB),, DC OUTPUT +V DC OUTPUT -V 5,6 DC OK RELAY CONTACT (VERTICAL) INPUT VOLTAGE (VAC) Hz PS-S Series Terminal Pin. No Assign. (TB) FG AC/N AC/L Terminal Pin. No Assign. (TB), DC OUTPUT +V, DC OUTPUT -V 5,6 DC OK RELAY CONTACT Data not available at print time. Please check our website, altechcorp.com, for the latest information. 55 Note: All dimensions are in millimeters, to convert to inches multiply by Phone: Fax: Web: info@clrwtr.com 7

limiting, auto-recovery Over-voltage protection:* 5%-5% rated output voltage Setup, rise, hold up time:* ms, 0ms, ms at full load and 0V AC Withstand voltage: I/P-O/P:KV AC, I/P-FG:.

5 0-W Single Phase Low w Profile Power Supplies Key Features Cooling by free air convection Universal AC Input / Full Range LED indicator for power on % full load burn-in test year warranty Input voltage range: 85-6V AC -V DC AC inrush current (only PS-0xx): Cold start: 5A at 5V AC, 0A at 0V DC DC adjustment range:* ±0% rated output voltage Overload protection:* 05%-% constant current limiting, auto-recovery Over-voltage protection:* 5%-5% rated output voltage Setup, rise, hold up time:* ms, 0ms, ms at full load and 0V AC Withstand voltage: I/P-O/P:KV AC, I/P-FG:.5KV AC* Working temperature: - to + C (- to + F) at %, and + C (+ F) at % load Safety standards: UL9- UL8* EMC standards: EN5 class B* EN--,,,5,6,8, ENV EN6- Military Standard MIL-HDBK-7F * Except PS-xx (see data sheet at altechcorp.com) NEW PRODUCT 0W Single Output Class II DIN Rail Power Supply PS-005 5V DC A ±% mvp-p 7% PS-0 V DC A ±% mvp-p 8% PS-05 5V DC A ±% mvp-p 8% PS-0 V DC.5A ±% mvp-p 8% Universal Input: 85-6V AC, -V DC full range; 5V AC; 0V AC Connection: Input - poles, Output poles screw terminal Size (WxHxD): 78x9x56mm (.07x.66x.05 inches) Packaging: /box; 0.59lbs / 0.7Kg 5W Single Output Class II DIN Rail Power Supply PS-5 5V DC 5A ±% mvp-p 7% PS-5 V DC.5A ±% 0 mvp-p 77% PS-55 5V DC.8A ±% mvp-p 77% PS-5 V DC A ±% mvp-p % Universal Input: 85-6V AC, -V DC full 5V AC, 0V AC Connection: Input - poles, Output poles screw terminal Size (WxHxD): 78x9x67mm (.07x.66x.6 inches) Packaging: /box; 0.69lbs / 0.Kg W Single Output Class II DIN Rail Power Supply PS-05 5V DC 6.5A ±% mvp-p 76% PS- V DC.5A ±% mvp-p 8% PS-5 5V DC.0A ±% mvp-p 8% PS- V DC.5A ±% mvp-p 8% Universal Input: 88-6V AC, -V DC full 5V AC, 0V AC Connection: Input - poles, Output poles screw terminal Size (WxHxD): 78x9x56mm (.07x.66x.05 inches) Packaging: /box; 0.66lbs / 0.Kg W Single Output Class II DIN Rail Power Supply PS- V DC 6.5A ±% mvp-p 87% PS-5 5V DC.5A ±% mvp-p 87% PS- V DC.0A ±% mvp-p 89% Universal Input: 88-6V AC, -V DC full range; 5V 0V AC Connection: Input - poles, Output poles screw terminal Size (WxHxD): x9x56mm (.9x.66x.05 inches) Packaging: /box; 0.77lbs / 0.5Kg Phone: Fax: Web: info@clrwtr.com

6 PS-0 Series 9 Terminal Pin. No AC/L 5,6 -V, AC/N +V 7 8 LED +V ADJ. VS Inpu t Voltag e Ta=5 C (VERTICAL) INPUT VOLTAGE (VAC) Hz 9 PS-5 Series Terminal Pin. No Pin Pin AC/L 6,7 DC OUTPUT+V AC/N 8 LED 9 +V ADJ.,5 FG DC OUTPUT-V (VERTICAL) OUTPUT VOLTAGE (V) Static Charateristics (V) INPUT VOLTAGE (VAC) Hz Ta=5 C 00 0 OUTPUT RIPPLE (mvp-p) PS- Series Terminal Pin. No AC/L 5,6 -V, AC/N +V 7 8 9LED +V ADJ (VERTICAL) Outp utderating VS Input Voltag e INPUT VOLTAGE (VAC) Hz Ta=5 C PS- Series 5 9 Terminal Pin. No AC/L 5,6 -V, AC/N +V 7 8 LED +V ADJ. Outp utderating VS Inpu t Voltag e Ta=5 C (VERTICAL) INPUT VOLTAGE (VAC) Hz Phone: Fax: Web: info@clrwtr.com

75-W Single Phase Power P Supplies 75W Single Output DIN Rail Power Supply Key Features Universal AC Input / Full Range or switch select LED indicator for power on % full load burn-in test year

limiting, auto-recovery Over-voltage protection: 5%-5% rated output voltage Setup, rise, hold up time: 0ms; ms; 0ms at full load and 0V AC NEW PRODUCT Withstand voltage: I/P-O/P:KV AC, I/P-FG:.

5KV AC Working temperature: - to + C (- to + F) at %, and + C (+ F) at % load Safety standards: UL9- UL8 EMC standards: EN5 class B, EN--,,,5,6,8,, ENV, EN6- Military Standard MIL-HDBK-7F * Except

7 75-W Single Phase Power P Supplies 75W Single Output DIN Rail Power Supply Key Features Universal AC Input / Full Range or switch select LED indicator for power on % full load burn-in test year warranty Input voltage range:* 85-6V AC -V DC AC inrush current: Cold start: A at 5V AC A at 0V AC DC adjustment range: ±0% rated output voltage Overload voltage protection: 05%-% constant current limiting, auto-recovery Over-voltage protection: 5%-5% rated output voltage Setup, rise, hold up time: 0ms; ms; 0ms at full load and 0V AC NEW PRODUCT Withstand voltage: I/P-O/P:KV AC, I/P-FG:.5KV AC, O/P-PG: 0.5KV AC Working temperature: - to + C (- to + F) at %, and + C (+ F) at % load Safety standards: UL9- UL8 EMC standards: EN5 class B, EN--,,,5,6,8,, ENV, EN6- Military Standard MIL-HDBK-7F * Except PSH-xx (see data sheet at altechcorp.com) PS-75 V DC 6.A ±% mvp-p 76% PS-75 V DC.A ±% mvp-p % PS-758 8V DC.6A ±% mvp-p 8% Universal Input: 85-6V AC, -V DC full 5V AC, 0V AC Connection: Input - poles, Output poles screw terminal Size (WxHxD): 55.5x5xmm (.x.95x.95 inches) Packaging: /box;.5lbs / 0.Kg W Single Output DIN Rail Power Supply PS- V DC 0A ±% mvp-p % PS- V DC 5A ±% mvp-p 8% PS-8 8V DC.5A ±% mvp-p 85% Switch select Input: 88-V AC / 76-6 V AC, 8-V DC 5V 0V AC Connection: Input - poles, Output poles screw terminal Size (WxHxD): 65.5x5xmm (.56x.95x.95 inches) Packaging: /box;.75lbs / 0.79Kg W High Input Single Output DIN Rail Power Supply PSH- V DC 5A ±% mvp-p 85% PSH-8 8V DC.5A ±% mvp-p 86% Switch select Input: -5V AC, -7V DC range, 0V AC, 0V AC Connection: Input - poles, Output poles screw terminal Size (WxHxD): 65.5x5xmm (.56x.95x.95 inches) Packaging: /box;.65lbs / 0.75Kg W Single Output DIN Rail Power Supply with PFC Function PSP- V DC 0A ±% mvp-p 8% PSP-8 8V DC 5A ±% mvp-p 85% Universal Input: 85-6V AC, -V DC full 5V 0V AC Built in active Power Factor Correction function. PF>0.95 Connection: Input - poles, Output poles screw terminal Size (WxHxD): 5x5xmm (.95x.95x.95 inches) Packaging: /box;.7lbs /.Kg Phone: Fax: Web: info@clrwtr.com

8 5. Serving the Automation & Control Industry since 98. PS-75 Series PS- Series TB TB LED Terminal Pin. No Assign. (TB) FG AC/N AC/L Terminal Pin. No Assign. (TB) 5.,, TB DC OUTPUT +V DC OUTPUT -V TB LED 5VAC FG AC/N AC/L 0VAC Terminal Pin. No Assign. (TB) Terminal Pin. No Assign. (TB), DC OUTPUT +V, DC OUTPUT -V V V, 8V (VERTICAL) V,V 8V (VERTICAL) OUTPUT VOLTAGE (V) VS Input Voltage Ta=5 C INPUT VOLTAGE (VAC) Hz Static Characteristics (V) INPUT VOLTAGE (VAC) Hz Ta=5 C OUTPUT RIPPLE (mvp-p) PSH- Series Derating Curve Terminal Pin. No Assign. (TB) FG 5. AC/N(L) AC/L(L) Terminal Pin. No Assign. (TB) TB,, LED (VERTICAL) 5. PSP- Series 5.5 TB Terminal Pin. No Assign. (TB) FG AC/N AC/L Terminal Pin. No Assign. (TB), DC OUTPUT +V, DC OUTPUT -V Note: All dimensions are in millimeters, to convert to inches multiply by VAC Vin: - - 0VAC 0VAC 0VAC (VERTICAL) VS Input Voltage Ta=5 C INPUT VOLTAGE (VAC) Hz Phone: Fax: Web: info@clrwtr.com

W Single Phase Power P Supplies Key Features Universal AC Input / Full Range or switch select LED indicator for power on % full load burn-in test year warranty Input voltage range: -6V AC -V DC AC

9 W Single Phase Power P Supplies Key Features Universal AC Input / Full Range or switch select LED indicator for power on % full load burn-in test year warranty Input voltage range: -6V AC -V DC AC inrush current: Cold start: 7A at 5V AC 5A at 0V AC DC adjustment range: ±0% rated output voltage Overload voltage protection: 05%-% constant current limiting, auto-recovery Over-voltage protection: 5%-5% rated output voltage Setup, rise, hold up time: 0ms; ms; ms at full load at 5V AC and 0V AC Withstand voltage: I/P-O/P:KV AC, I/P-FG:.5KV AC, O/P-PG: 0.5KV AC Working temperature: - to + C (- to + F) at %, and + C (+ F) at % load Safety standards: UL9- UL8 EMC standards: EN5 class B, EN--,,,5,6,8,, ENV, EN6- Military Standard MIL-HDBK-7F W Single Output DIN Rail Power Supply with PFC Function PSP- V DC A ±% mvp-p 89% PSP-8 8V DC 0A ±% mvp-p 89% Wide range Input: -6V AC only, -V DC, 0V AC Built in passive Power Factor Correction function compliance to EN--, PF>0.7 Connection: Input - poles, Output poles screw terminal Size (WxHxD): 7x5xmm (8.95x.95x.95 inches) Packaging: /box; 5.lbs /.Kg W Switch Select Single Output DIN Rail Power Supply with PFC Function PSP-S V DC A ±% mvp-p 89% PSP-S8 8V DC 0A ±% mvp-p 89% Switch select Input: -V AC / -6 V AC, 5-V DC range 5V 0V AC Built in passive Power Factor Correction function compliance to EN--, PF>0.7/0V AC only Connection: Input - poles, Output poles screw terminal Size (WxHxD): 7x5xmm (8.95x.95x.95 inches) Packaging: /box; 5.8lbs /.6Kg Phone: Fax: Web: info@clrwtr.com

10 Serving the Automation & Control Industry since 98. PSP- Series (V AC only) TB 7 TB LED TB Terminal Pin. No,, AC/L AC/N FG TB Terminal Pin. No DC OUTPUT +V DC OUTPUT -V Derating Curve (VERTICAL) Outpu De rating VS put In Voltag e 0 6 INPUT VOLTAGE (VAC) Hz PSP- with Switch Series (0V AC and V AC) VAC 5VAC TB TB LED 7 TB Terminal Pin. No,, AC/L AC/N FG TB Terminal Pin. No DC OUTPUT +V DC OUTPUT -V Derating Curve (VERTICAL) Output ratin g De VS put In ~ 6VAC ~ VAC 5 0 Voltag e INPUT VOLTAGE (VAC) Hz 6 Note: All dimensions are in millimeters, to convert to inches multiply by Phone: Fax: Web: info@clrwtr.com

-9W Three Phase Power P Supplies Key Features Three Phase Input LED indicator for power on % full load burn-in test year warranty Input voltage range: -5V AC -7V DC AC inrush current: Cold start: A

time: 0ms, ms, ms @ 0V AC 0ms, ms, ms @ 0V AC full load Withstand voltage: I/P-O/P:KV AC, I/P-FG:.5KV AC, O/P-PG 0.

11 -9W Three Phase Power P Supplies Key Features Three Phase Input LED indicator for power on % full load burn-in test year warranty Input voltage range: -5V AC -7V DC AC inrush current: Cold start: A DC adjustment range: ±0% rated output voltage Overload voltage protection: 05%-% constant current limiting, auto-recovery Over-voltage protection: 5%-5% rated output voltage Setup, rise, hold up time: 0ms, ms, 0V AC 0ms, ms, 0V AC full load Withstand voltage: I/P-O/P:KV AC, I/P-FG:.5KV AC, O/P-PG 0.5KV AC Working temperature: - to + C (- to +58 F) at % Safety standards: EN9- UL8 EMC standards: EN5 (CISPR), EN--,,,5,6,8, ENV, EN6- EN-6- (EN08-) Heavy Industrial Level, criteria A Military Standard MIL-HDBK-7F OPTIONAL W Three Phase Industrial DIN Rail Power Supply PST- V DC 0A ±% mvp-p 89% PST-8 8V DC 5A ±% mvp-p 89% Three phase input: -5V AC wide range, -7V DC 0V AC, 0V AC Connection: Input - poles, Output poles screw terminal Size (WxHxD): 5x5xmm (.95x.95x.95 inches) Packaging: /box;.9lbs /.Kg W Three Phase DIN Rail Power Supply PST- V DC A ±% mvp-p 89% PST-8 8V DC 0A ±% mvp-p % Three phase input: -5V AC wide range, -7V 0V 0V AC Connection: Input - poles, Output poles screw terminal Size (WxHxD): 7x5xmm (9.95x.95x.95 inches) Packaging: /box; 5.5lbs /.5Kg 9W Three Phase DIN Rail Power Supply (Also available with Optional Parallel Function (+)) PST-9 V DC A ±% mvp-p 9% PST-98 8V DC A ±% mvp-p 9% Three phase input: -5V AC wide range, 0V 0V AC Connection: Input - poles, Output 6 poles screw terminal Size (WxHxD): 76x5xmm (0.87x.95x.95 inches) Packaging: /box; 7.lbs /.Kg Phone: Fax: Web: info@clrwtr.com

12 TB LED TB TB Terminal Pin. No,, FG AC/L AC/L AC/L TB Terminal Pin. No DCOUTPUT +V DCOUTPUT-V Derating Curve (VERTICAL) Static Charaterisitcs Three phase operation Dual phase operation INPUT VOLTAGE (VAC) Hz PST- Series TB TB LED PST-9 Series 7 TB Terminal Pin. No,, AC/L AC/L AC/L FG TB Terminal Pin. No DCOUTPUT +V DCOUTPUT -V Derating Curve (VERTICAL) Static Charaterisitcs 85 Three phase operation Dual phase operation INPUT VOLTAGE (VAC) Hz TB ALARM TB TB Terminal Pin. No AC/L AC/L AC/L FG,,,5,6 DCOUTPUT +V DCOUTPUT -V LED TB Terminal Pin. No Derating Curve Static Charaterisitcs INPUT VOLTAGE (VAC) Hz Phone: Fax: Web: info@clrwtr.com

13 Accesories Redundancy Buffer Module UPS Module PS-RDN Key Features Suitable for redundant operation of V system Installed on 5 x 7.5 mm or 5 x 5 mm DIN Rail Relay contact signal output and LED indicator for input failure alarm Cooling by free air convection years warranty Power Supply Redundancy Buffer Module PS-RDN is a A redundancy (decoupling) module for the V DC power system. Containing sets of A Oring diodes with excellent heat dissipation deployment. PS- RDN give you a new option for safe connection of + redundant set-up. Not only perfectly decouple power sources from each other as well as from the load, PS-RDN also provides users monitoring signals for both input channels through the built-in relays. Since there s no switching components inside the module, PS-RDN will not arise additional EMI issues and should provide you a worry-free application platform! Cat. No. Voltage Range Current Range NEW PRODUCT PS-RDN -8V DC 0-A Connection: Terminal - poles, Terminal - 6 poles Size (WxHxD): 55.5x5xmm (.9x.95x.95 inches) Packaging: /box;.lbs / 0.5Kg DC Fail Block Diagram Vout+ Vin/Vout- Vin A+ RELAY B RELAY A + + Alarm A PS-UPS Key Features Battery controller for DIN Rail UPS system Installed on 5 x 7.5 mm or 5 x 5 mm DIN Rail Parallel connection to DC BUS Suitable for V system up to A Built-in battery test function Battery polarity protection Relay contact signal output and LED indicator for DC BUS OK, Battery Fail, and Battery Discharge Cooling by free air convection years warranty NEW PRODUCT AMP UPS Battery Controller PS-UPS is a A max. DC UPS (battery control) module for the V DC power system. Accompany with external batteries, it can back-up up to A of current to critical loads for certain period of time depending on the capacity of batteries. With complete monitoring signals and LED indicators for DC BUS OK, Battery Fail, Battery Discharge and the repeated Battery Test function to check the situation of external batteries. Users can customize their own DC UPS system to back up critical loads and capture the status of the whole system easily. Cat. No. Voltage Range Current Range PS-UPS -9V (Battery) 0 - A -9V (DC) Connection: Terminal - poles, Terminal - 6 poles Size (WxHxD): 55.5x5xmm (.9x.95x.95 inches) Packaging: /box;.lbs / 0.55Kg Phone: Fax: Web: info@clrwtr.com

14 Serving the Automation & Control Industry since 98. PS-RDN Series 5. Applications: 55.5 Terminal Pin. No Assign. (TB) Vout+ Vout-, Vin- 5 6 Vin A+ Terminal Pin. No Assign. (TB) Alarm A Alarm A Derating Curve (VERTICAL) Vin A Vin A... Vin A VinA VinA Vout Vout Vout Vout Vout Vout Load Load Load PS-UPS Series Terminal Pin. No Assign. (TB) BATTERY INPUT + BATTERY INPUT - Terminal Pin. No Assign. (TB) 5 6 Derating Curve (VERTICAL). Backup connection for AC interruption. Combine redundancy module (PS-RDN) to back up AC interruption or failure of PS-UPS PS-UPS PS-RDN V Battery - + BAT DC V/Amax Load V Battery - BAT DC Vout Vin +---B+ A Load + Phone: Fax: Web: info@clrwtr.com 7

DIN MOUNTING RAILS Altech DIN Rails comply with DIN 05, 0 and 05 Standards.

Standard rails are made of steel with zinc plating and chromate passivation and are available in various configurations.

Upon request they can be cut to custom lengths and punched with holes or perforations. DIN5 DIN5 (7.

SUPPORT BRACKETS Support Brackets elevate DIN Rails away from the panel to facilitate component mounting and to increase wiring

15 DIN MOUNTING RAILS Altech DIN Rails comply with DIN 05, 0 and 05 Standards. The use of DIN Rails enhances design capabilities, saves space and reduces labor. Standard rails are made of steel with zinc plating and chromate passivation and are available in various configurations. DIN Rails are 5mm wide and available in 7.5 and 5mm depths. They are supplied in m ('") and m (6 6 ) lengths. Upon request they can be cut to custom lengths and punched with holes or perforations. DIN5 DIN5 (7.5 mm deep) (5 mm deep) Type Cat. No. Length Std. Pk. Type Cat. No. Length Std. Pk. Perforated Steel 5 m 5/M m Perforated Steel CA-5/S-M m CA-5/S m Unperforated Steel 50 m 50/M m Unperforated Steel CA-5-M m CA-5 m SUPPORT BRACKETS Support Brackets elevate DIN Rails away from the panel to facilitate component mounting and to increase wiring access. Angled brackets tilt the rail by 5 to improve visibility. Straight brackets are available in three heights for optimum positioning of the rail. Brackets mount with screws to any panel or flat surface and have tapped center holes for rail mounting. Bracket material is steel, zinc plated yellow chromate. DIN5 DIN5 Cat. No. Std. Pk. CA 5 Height Cat. No. Std. Pk. CA 5 CA 5 CA 5 Phone: Fax: Web: info@clrwtr.com

Serving the Automation & Control Industry since 98. END STOPS and SPACER End Stops prevent power supplies and other DIN Rail mount components and devices from moving laterally on the rail.

CA0 is used with 7.5mm deep DIN rail and the CA is used with 5mm deep rail. DIN Rail mountable spacers (CASP and 5.9) are generally used to ensure cooling space for the small power supply.

No. Std. Pk. CA Cat. No. Std. Pk. CASP Cat. No. Std. Pk. 5.

16 Serving the Automation & Control Industry since 98. END STOPS and SPACER End Stops prevent power supplies and other DIN Rail mount components and devices from moving laterally on the rail. They are available in polyamide 6.6 and metal configurations for 5mm DIN rails. CA is a small endstop for the smaller power supplies. CA is a large endstop for larger power supplies. CA0 is used with 7.5mm deep DIN rail and the CA is used with 5mm deep rail. DIN Rail mountable spacers (CASP and 5.9) are generally used to ensure cooling space for the small power supply. CA CA CA0 CA CASP 5.9 Polyamide 6.6 Polyamide 6.6 Steel Steel Polyamide 6.6 Polyamide x x 9.5 mm x 5 x 8 mm 7 x 9.5 x 6 mm 7 x 9.5 x 6 mm 9 x x 8 mm 69 x 55 x 9 mm Cat. No. Std. Pk. CA Cat. No. Std. Pk. CA Cat. No. Std. Pk. CA0 Cat. No. Std. Pk. CA Cat. No. Std. Pk. CASP Cat. No. Std. Pk GROUND BLOCKS for DIN Rail Use ground blocks instead of grounding studs and wire lugs to terminate ground wires, saving installation and wiring time. Ground blocks clamp mechanically onto the DIN Rail by tightening the center mounting screw, making a reliable electrical connection between the cage clamp terminals and the DIN Rail. The rail serves as a busbar and automatically distributes ground potential to all other ground terminals on the same rail. Ground blocks can also be used CGTN as end stops, preventing other terminal blocks and components from moving laterally on the DIN Rail. CGT6N CGT0U They are supplied with a standard green/yellow housing for easy identification. AEx eii EEx eii Terminal Width 6 mm 8 mm 0 mm Height x Length 5. x 5. mm 7 x 5.5 mm 9.5 x 5 mm Stripping Length 9 mm mm mm Insulation Material Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 Type of Connection screw clamps screw clamps screw clamps Approvals Wire Range C US -0 AWG 0.5- sq.mm -0 AWG C US -8 AWG.5-6 sq.mm -8 AWG C US -6 AWG.5-0 sq.mm 6-8 AWG Torque 7 lb-in 0.8 Nm 7 lb-in lb-in 0.8 Nm lb-in lb-in. Nm lb-in Phone: Fax: Web: info@clrwtr.com 9

DIN Rail Power Supplies

DIN Rail Power Supplies Since 1984, Altech Corporation has grown to become a leading supplier of automation and industrial control components. Headquartered in Flemington, NJ, Altech has an experienced