Features. Plunger mechanism. Shear mechanism. Spout. Mechanical Feeders
|
|
- Valentine Wells
- 5 years ago
- Views:
Transcription
1 High Speed Feeders
2 Mechanical Feeders After serving the glass industry for half a century, the mechanical feeder is proving to be a very reliable machine still up to present date. 2
3 Heavy duty high speed 7 stroke plunger linkage Oil bath, air spring operated shear mechanism Standard and Deep type spout case 5 to 12 diameter gear driven revolving tube Standard or self aligning sleeves Mechanical Feeders Features The improved feeder suits high-speed operation, ensuring smooth running and featuring light weight plunger carrier. The rigid design of casted supporting frame incorporates linear ball bearings for the plunger supporting shaft. Strenghtened plunger guide features lateral guided rollers to ensure minimal back lash during plunger up and down movement. Three different shear blade stroke are available by the three yoke point of the connecting link. Inverted drop guide to ensure consistent gob guidance. Plunger mechanism The plunger carrier to support the plunger The linkage provides the movement to the plunger The adjustable linkage geometry provides right stroke and plunger lowest position (7 max stroke) Chucks can be provided in single, twin and triple configuration Spout Four different casing are available: 281 standard (7 deep and 18 wide) 281 deep (10 deep and 18 wide) 703 (11-5/8 deep and 22 wide) 715 (13 deep and 24 wide) Shear mechanism Light weight aluminium alloy arms Shears are air spring actuated, movement profile is granted by the relevant cam by means of calibrated linkage and rod Sturdy oil bath gear to reduce maintenance frequency Adjustable blade tensioning and cutting position Adjustable blades over lapping Shearing angle can be jigged from 30 right to 90 left S.G, D.G and T.G variables are available 3
4 RTC - Revolving Tube Control RTC is the system to control rotation of the revolving tube sleeve. Clockwise and counterclockwise rotation Tube speed adjustable from 0 rpm to 10 rpm. Resolution 2/100 rev. Power supply: VAC single-phase ±10 % 50/60 Hz Digital counter for easy speed adjustable Operating temperature: from -10 C to +55 C The system may be installed on any kind of existing feeder revolving tube 4
5 Feeders Motor Inverter Asynchronous motor (power: 1.1 KW) Vectorial inverter (power: 1.5 KW) RTC - Revolving Tube Control 344 Asynchronous motor (power: 0.55 KW) Vectorial inverter (power: 0.75 KW) 5
6 THD - Tube Height Driver THD is used for the electrical position adjustment of the feeder revolving tube The running mode are: AUTO: equipment can be interfaced with any of the automatic gob weighting system available on the market MANUAL: operator adjust the position of the slave by mean of up and down switches Features The THD system is composed as follows: Control panel: 1.1 Kw power, supply, immediate stop circuit. A.C. motor gearbox Box for motor cut off and pushbutton to reset the drive status Engage the gearbox Technical Features Stop circuit Control of two limits switches for the min. and max. adjustment points of the revolving tube height Control of the immediate stop status of the revolving tube Digital display of tube height Engage the gearbox Revolving tube Clutch Motor gear box Spout Switch TDH Control panel Weight control system 6
7 7 THD - Tube Height Driver
8 The images and data in this catalogue are only indicative and never override the contract engagement of Bottero S.p.A. For photographic reasons the products is often shown complete with accessories that are not part of the standard equipment of the machine. Le immagini riprodotte sul presente catalogo e i dati contenuti hanno puro valore indicativo e in nessun caso costituiscono impegno contrattuale da parte della Bottero S.p.A. Per ragioni fotografiche il prodotto è spesso ripreso completo di accessori che non fanno parte del corredo standard della macchina. Feeder type Capacity Gob weight range 344 HS (t/day) SG (grams) DG (grams) Standard spout Deep spout HS (t/day) SG (grams) DG (grams) Standard spout Deep spout HS (t/day) SG (grams) DG (grams) Deep spout HS (t/day) SG (grams) DG (grams) Deep spout BOTTERO S.p.A. - via Genova Cuneo - Italy Tel Fax hollow.sales@bottero.com
A member of the ardagh group
Heye Servo Technology for IS-Machines presented by : Dipl.-Ing. Hans-Joachim Böer AFGM Conference, Manila 2006 Heye Servo IS-Machine The following Servo Mechanism are installed : Blank Mould Closing Mechanism
More informationMO Declutchable Manual Override Gearbox EL-O-Matic F-Series Actuators option
EFG.07.MO.EN, Page 1 of 2, Rev. 0 May 2018 MO Declutchable Manual Override Gearbox s option Light weight aluminum design and suitable for indoor and outdoor use. Easy operation. Suitable for quarter turn
More informationmotor driven metering pumps
motor driven metering pumps DIAPHRAGM ACTUATED TYPE motor driven dosing pumps diaphragm type Welcome to FWT Dosing Systems FWT (Fluid and Water Technology) is a company formed with specialised experts
More informationR-type, RY-type EPR-Series. Actuators for Quarter-Turn Valves
R-type, RY-type EPR-Series Actuators for Quarter-Turn Valves >> Introduction The EPR-Series pneumatic actuator provides a rugged solution for quarter-turn actuation while reducing maintenance requirements.
More informationTechnical News. Two-way air operated Funnel Mechanism Cham, January TNB88 / Product Mgt. Emhart Glass SA 31-Jan-03 Page 1 of 5
Technical News Cham, January 2003 Two-way air operated Funnel Mechanism 200-2100 Up-Stroke Cushion Control Valve Top-mounted Check Valve Increased Stroke Rigid Cam Cam Roller Fixation TNB88 / Product Mgt.
More informationmotor driven metering pumps
motor driven metering pumps DIAPHRAGM ACTUATED TYPE motor driven dosing pumps diaphragm type Welcome to FWT Dosing Systems FWT (Fluid and Water Technology) is a company formed with specialised experts
More informationMITSUBISHI Industrial Sewing Machine
MITSUBISHI Industrial Sewing Machine TECHNICAL INFORMATION Automatic Undertrimmer, Single-Needle Lookstitch Model LS2-1 1 80 ET-035 MITSUBISHI.. "ELECTRIC CONTENTS 1. SPECIFICATIONS... 2 2. THREAD TRIMMER
More informationPneumatic Actuators. 1. DIE CAST ALUMINUM END CAPS: standard polyester powder coated
4 5 Pneumatic s 1 2 6 NOMINAL VALUES: Pressure rating max 115 PSI Temperature range: standard (-4 F;+185 F), high (-4 F;+302 F), low (-40 F;+185 F) Pre lubricated for life of actuator at assembly 100%
More informationWARE HANDLING SERVO MECHANISM SERVO INVERT SERVO TAKE-OUT BDF A.P. PUSHER
WARE HANDLING SERVO MECHANISM SERVO INVERT SERVO TAKE-OUT BDF A.P. PUSHER WARE HANDLING SERVO MECHANISM BDF, first in the world on the 1992, has designed and implemented in the I.S. Machines the Servo
More informationmotor driven metering pumps
motor driven metering pumps DIAPHRAGM ACTUATED TYPE www.fwtsystems.it motor driven dosing pumps diaphragm type Welcome to FWT Dosing Systems FWT (Fluid and Water Technology) is a company formed with specialised
More informationHOLINGER SF GEARBOX MANUAL
HOLINGER SF GEARBOX MANUAL Approved By: Leigh Nash Date: 26/05/2011 Rev: D Date: 11/11 Holinger Engineering Gearbox Manual Page 1 FOREWORD The Holinger SF is a sequential-shift transaxle designed for use
More informationSpare Parts Catalogue
COMPANY MAN 24 CONTACT 2017 Spare Parts Catalogue HOME EUROTRADING was only founded in 1989 in Italy but with a 50 years experience matured on the fi eld in Ethiopia, Somalia, Zimbabwe, Kenya and fi nally
More informationEddy current Dynamometers
Eddy Current Brakes Depliant_2015 Page 1 of 41 Eddy Current Dynamometers from 5 kw to 3200 kw Apicom Eddy Current Dynamometers for all type of engine load test: Steady State load test Transient load test
More informationVALVITALIA VALVE OPERATORS
A Long Experience in Energy Equipment and one Goal: The Customer s satisfaction. VALVITALIA VALVE OPERATORS 1 VALVITALIA AUTOMATION DIVISION PROFILE Valvitalia Automation Division manufactures all type
More informationMITSUBISHI 'AMITSUBISHI. Industrial Sewing Machine. Automatic Undertrlmmer, Needle Feed, Single-Needle Lookstitch
MITSUBISHI Industrial Sewing Machine TECHNICAL INFORMATION Automatic Undertrlmmer, Needle Feed, Single-Needle Lookstitch Model LSS-210 ET-oes 'AMITSUBISHI ELECTRIC CONTENTS 1. CONSTRUCTION.. 2~3 1.1 Entire
More informationG Type Range of Actuators
G Type Range of Actuators Installation & Operation Instruction Manual Heavy Duty Scotch Yoke Pneumatic & Hydraulic Actuators Head Office and Factory: Sferova s.r.l Via delle Industrie, 30/32 I-20050 Sulbiate
More informationBeing well-built is what counts. Thickness Gauges Automatic Systems for Extrusion-Dies
Being well-built is what counts Thickness Gauges Automatic Systems for Extrusion-Dies Kapa I & Kapa II MEASURING WITH CAPACITIVE/EDDY CURRENT Non-contact thickness measuring device for films up to 2 mm
More informationC-SERIES S-SERIES. Metric Machine Screw Jacks EMA LINEAR ACTUATORS
C-SERIES S-SERIES Metric Machine Screw Jacks EMA LINEAR ACTUATORS Power Jacks has a proud engineering heritage dating from the earliest years of the 20th Century. A heritage that is about excellence: about
More informationDouble Acting & Spring Return. SERIES 92/93 Rack & Pinion PNEUMATIC ACTUATOR. The High Performance Company
PNEUMATIC ACTUATOR SERIES 92/93 Rack & Pinion Double Acting & Spring Return The High Performance Company SERIES 92/93 Styling, strength, compactness, and simplicity of design have been combined to produce
More informationThe following valve actuators are compatible with all Clippard MAV, MAVO, MJV, MJVO, ES-1, & FV series valves.
VALVE ACTUATORS The following valve actuators are compatible with all Clippard MAV, MAVO, MJV, MJVO, ES-1, & FV series valves. One of the most versatile items in the Clippard line. Permits wide circuit
More informationTechnical News Bulletin
Technical News Bulletin April 1995 3000 Series Process Control 1. Introduction Quick Change Plunger Mechanisms Series 3000 are now provided with an additional operating enhancement. To permit optimization
More informationGX270 POWEREQUIPMENT.HONDA.COM.AU
GX270 POWEREQUIPMENT.HONDA.COM.AU The GX270 was introduced in 2011, featuring new features, more power, quieter & better performance, lower fuel consumption, and lower emissions. INTRODUCTION COMMON APPLICATIONS
More informationACCESSORI PER OFFICINE ACCESSORIES FOR WORKSHOPS
S E Z I O N E 0-2 0 1 7 COLORI/FINITURE STANDARD STANDARD COLOURS/FINISHINGS COLORE ROSSO cod. 03020 RED Colour code 03020 art./03020 (65/03020) COLORE GIALLO cod. 20447 YELLOW Colour code 20447 art./20447
More informationSAX Electronic Valve Actuator
Document No. 129-561 SAX Electronic Valve Actuator Product Description The SAX Electronic Valve Actuator requires a 24 Vdc or 24 Vac, Class 2, supply signal to control a Flowrite 599 Series valve or a
More informationPlumbing Tools. General Tools MINI TUBE CUTTER - THPC125. MINI TUBE CUTTER, 3-16mm TUBE CUTTER MIDGET TUBE CUTTERS TUBE CUTTERS TUBE CUTTER
MINI TUBE CUTTER, 3-16mm MINI TUBE CUTTER - THPC125 Designed for use in tight quarters where other cutters won't fit Accurate cutting of copper, brass and aluminium tubing Compact body and sliding block
More informationACCESSORI PER OFFICINE ACCESSORIES FOR WORKSHOPS
S E Z I O N E 0-2 0 1 4 COLORI/FINITURE STANDARD STANDARD COLOURS/FINISHINGS COLORE ROSSO cod. 03020 RED Colour code 03020 Esempio codifica/code example: art./03020 (65/03020) COLORE GIALLO cod. 20447
More informationFLOAT CUT EN. BOTTERO S.p.A. via Genova Cuneo Italy Tel. : Fax :
Float Cut BCS FLOAT CUT EN code: FMC001122 rev.: 00 print code: AM BOTTERO S.p.A. via Genova 82-12100 Cuneo Italy Tel. : +39 0171 310611 - Fax : +39 0171 40161 www.bottero.com 3 TABLE OF CONTENTS THE RANGE...6
More information8XXX Series. Typical Application Low-profile bellhousing mount, often with adapter. Hydraulic Release Bearings GEN3
8XXX Series Typical Application Low-profile bellhousing mount, often with adapter. Hydraulic Release Bearings GEN3 Tilton HRBs Advanced manufacturing Renowned Tilton quality Tilton offers a wide range
More informationMVE2XX. Globe Valves Actuators. Power. Model Force (N)
Globe Valves Actuators MVE2XX Model Force (N) supply Description MVE206 600 230Vac±10% long yoke, modulating/fl oating control MVE210 1000 230Vac±10% long yoke, modulating/fl oating control MVE215 1500
More information2SP TWIN SCREW PUMPS ABS BV DNV GL LR RINA SERIES
TWIN SCREW PUMPS SERIES 2SP The new pump 2SP Series by SEIM represent the evolution of more than 35 years of experience in the field of design and construction of screw rotary pumps. Successful supplies
More informationSY Series Scotch Yoke Actuators
SY Series Scotch Yoke Actuators Engineering Creative Solutions for Fluid Systems Since 1901 FEATURES MODULAR DESIGN The Pratt Industrial SY series scotch yoke actuator has a highly efficient and interchangeable
More informationTerminal Assembly Machine
1996 Instruction/Service Manual Terminal Assembly Machine Acme Manufacturing Inc. #J9876 Built by: For: The Wiley Company ACME Manufacturing, Inc. 2000 Coyote Lane Roadrunner, MN 55122 (612) 555-1234 (612)
More informationVA-7150 Electric Valve Actuator. Features and Benefits. G 500N force output in a compact unit G Magnetic clutch. G Unique Yoke Design
VA-7150 Electric Valve Actuator European Electronic Controls Catalogue Section E Product Bulletin VA-7150 Issue Date 03 2000 I ntroduction The VA-7150 series synchronous motor driven actuator provides
More informationMC-351, 421, 431, MC-4311
MC-35, 42, 43, MC-43 Three-Wire, Two Position Actuators General Instructions Applications For two-position operation of dampers or valves in heating, ventilating and air-conditioning systems and similar
More informationDemag DCS-Pro chain hoist Demag DCMS-Pro Manulift. With infinitely variable speed control
Demag DCS-Pro chain hoist Demag DCMS-Pro Manulift With infinitely variable speed control Infinitely variable speed control for even faster and more precise handling Demag chain hoists with infinitely variable
More informationPASSASPINA E VASCHETTE CANCELLERIA CABLE HOLDERS AND STATIONERY TRAYS
S E Z I O N E 0-2 0 1 7 COLORI/FINITURE STANDARD STANDARD COLOURS/FINISHINGS COLORE NERO cod. 09004 BLACK Colour 09004 COLORE ANTRACITE cod. 07016 ANTHRACYTE Colour 07016 art./09004 (34/09004) COLORE GRIGIO
More informationTechnical description... 1 Limit switch versions MR 6 Power tables... 6 Dimensions... 7 Spare part lists... 8
Index Technical description... 1 Limit switch versions... 3 MR 6 Power tables... 6 Dimensions... 7 Spare part lists... 8 MS 12 Power tables... 10 Dimensions... 11 Spare part lists... 13 MR 30 Power tables...
More informationGAS BURNERS BLU 3000 PR BLU 4000 PR
GAS BURNERS techniques for energy saving MODELS BLU 3000 PR BLU 4000 PR 220/380 V 60 Hz L.P.G. LB 450 03.03.97 TECHNICAL DATA MODELS BLU 3000 PR BLU 4000 PR Thermal power max. kcal/h 2.580.000 3.440.000
More informationMounting and operating instructions EB 5801 EN. Electric Actuators Type 5801 (Rotary Actuator) Type 5802 (Linear Actuator)
Electric Actuators Type 5801 (Rotary Actuator) Type 5802 (Linear Actuator) Linear Actuator with Type 3260 Control Valve Rotary actuator with lever system Linear actuator with Type 3321 (V2001) Control
More informationVB VALVES & AUTOMATION
Introduction to Valve What are Valves? Valves are mechanical device that controls the flow and pressure within a system or process. They are essential components of a piping system that conveys liquids,
More informationSeries 77. Miniature 3/2 Valves PUSH BUTTON TOGGLE LEVER SPRING RETURN WITH DETENT ONE WAY ROLLER ROLLER AIR PILOT FINGER BUTTON BALL PLUNGER
Miniature 3/2 Valves TOGGLE LEVER 77.1130 1/8 77.1131 1/8 ROLLER ONE WAY ROLLER - N/O or N/C application - Aluminum alloy 125 PSI -10 C to 60 C (14 F to 140 F) 77.1132 1/8 77.1133 1/8 BALL PLUNGER AIR
More informationTooling Assistance Center
Safeguards are designed into this application equipment to protect operators and maintenance personnel from most hazards during equipment operation. However, certain safety precautions must be taken by
More informationELECTRIC ACTUATOR HVAC/BAC ELECTRIC IOM. E024, EO25, E026, EO29 & E030 Installation Operation and Maintenance Instructions TABLE OF CONTENTS
HVAC/BAC ELECTRIC IOM ELECTRIC ACTUATOR E024, EO25, E026, EO29 & E030 Installation Operation and Maintenance Instructions TABLE OF CONTENTS Electric Actuator Specifications... 2 Overview... 3 Actuator
More informationTechnical Instructions Flowrite 599 Series SKD6xU Electronic Valve Actuators 24 Vac Proportional Control Description Features Application
Document No. 155-180P25 Flowrite 599 Series SKD6xU Electronic Valve Actuators 24 Vac Proportional Control Description The Flowrite 599 Series SKD6xU Electronic Valve Actuators require a 24 Vac supply and
More informationMoniteur INSTALLATION & OPERATING INSTRUCTIONS. SERIES 40 Positioners. Installation and Operating Instructions Series 40 Positioners.
INSTALLATION & OPERATING INSTRUCTIONS SERIES 40 Positioners Form IO2-0406 Description of Device Moniteur's Series 40 pneumatic (3-15psi) and electropneumatic (4-20mA) positioners are advanced control devices
More informationTech Note Truck 14 & 15.5 Twin Plate Cast Iron Type Installation Guidelines
1. (14 & 15.5 ) Check condition of the flywheel. Grind to resurface or replace flywheel. Surface MUST BE machined or premature clutch failure can occur. Flywheel depth must be 2.938 (74.62mm) for 14 (350mm)
More informationPNEUMATIC QUARTER TURN RACK & PINION ACTUATOR MODEL - HP
FEATURES AND BENEFITS Aluminium body, hard anodized, internally polished to 45-50µ and Nickel plated to protect against wear and corrosion Open/Closed indicator is standard on all models Travel adjustment
More informationGearheads H-51. Gearheads for AC Motors H-51
Technical Reference H-51 for AC Since AC motor gearheads are used continuously, primarily for transmitting power, they are designed with priority on ensuring high permissible torque, long life, noise reduction
More informationSCOTCH YOKE ACTUATORS
TITOLO TITOLO SCOTCH YOKE ACTUATORS Heavy duty pneumatic actuators SHD and CHD series ATEX GOST -R Quality system: ISO 9000 Max-Air Technology, Inc. 751 Hoff Rd O Fallon, Missouri 63366 Toll Free: 888.842.9998
More informationTechnical News. Servo Electric Takeout Series 200
Technical News Cham, 16-Feb-05 Servo Electric Takeout Series 200 1. Introduction Emhart Glass Servo Electric Takeout Mechanism (SETO) is designed to meet today s Glass Industry requirements for precise
More informationSOCLA pneumatic actuator
Summary Sales leaflet p.2 Technical description p.3 Dimension p.4 Interfaces p.5-8 Applications and main characteristics Objective : Socla pneumatic actuators are designed to meet the demanding needs of
More informationMTMANUAL TRANSMISSION GENERAL 1. SPECIFICATIONS. 1) General Specifications. 2) Tightening Torque MANUAL TRANSMISSION
03-3 MT GENERAL 1. SPECIFICATIONS 1) General Specifications 2) Tightening Torque 03-4 OVERVIEW AND OPERATION PROCESS 1. OVERVIEW 4WD Features 1. All gears use the helical type and high strength materials.
More informationHQ Series ¼ Turn Electric Actuator
HQ Series ¼ Turn Electric Actuator Models HQ008 to HQ300 Operation and Installation Manual HQ Series Operation and Installation Manual 1 Table of Contents: General 1.0 Actuator Mounting 2.0 Power Requirements
More informationEstablished Leaders in Valve Actuation. RCI265 Scotch Yoke Actuator For Quarter-Turn Valves
Established Leaders in Valve Actuation Scotch Yoke Actuator For Quarter-Turn Valves Remote Control Actuators - Quality Controlled Since the company was founded in 1961, Remote Control has become the standard
More informationBulletin. Technical News. Mold Open and Close Mechanism with Linkage in Oil for Machine Types E & EF 4-1/4 and 5. Cham, January 1994
Bulletin Technical News Cham, January 1994 Mold Open and Close Mechanism with Linkage in Oil for Machine Types E & EF 4-1/4 and 5 TNB 21/Product Management 1994 Emhart Glass SA 1 1. INTRODUCTION Emhart
More informationAerocourse. Fan Assisted Trench Heating
Aerocourse Fan Assisted Trench Heating Model s are available in a range of eight models to suit outputs as well as accommodate flow and return pipework. Four model types are available, each with an optional
More informationStatic Injection Timing
Page 1 of 13 006-025 Static Injection Timing General Information The static timing is relative to the amount of push tube travel remaining when the piston is 5.161 mm [0.2032 in], or 19 degrees before
More informationOne-way Clutches Tension Pulleys, Bottom Roller Bearings
One-way Clutches Tension Pulleys, Bottom Roller Bearings One-way clutches One-way Clutches This is a compact and roller type one-way clutch which formed a cam face on its outer ring. (Available shaft diameter
More informationNV Direct Coupled Globe Valve Actuator
70396 Rev. C Non-spring return, on/off, floating point, proportional control NV Direct Coupled Globe Valve Actuator NV24-3 US NVD24-3 US NV24-MFT US NVD24-MFT US Application For on/off, floating point
More informationActuator for mixing valves 0262EN March 2016
06EN March 06 07U758 -point floating actuator (connection M8 x,5 mm) for R98 and R98N mixing valves - K8 series 900 00 00A/ 800 006L/ Main features M8x,5 mm brass ring fixing to valve body. Immersion probe
More informationELECTROMECHANICAL ACME SCREW LINEAR ACTUATORS
N E W I D E A S I N L I N E A R M O T I O N ELECTROMECHANICAL ACME SCREW LINEAR ACTUATORS Limit switches cam-operated Geared potentiometer, single turn, for positioning control AC or DC electric motors
More informationContents. Section 2: Electrical - Switches, Solenoids and Motors
Contents Section 2: Electrical - Switches, Solenoids and Motors... 2-3 Switches...2-3 Switches A, B, C and D...2-4 Error Code A Switch...2-4 Error Code B Switch...2-5 Error Code C Switch...2-5 Error Code
More informationRS ACTUATO RS ACTUATO
ACTUATORS ACTUATORS flowconme ELECTRIC ACTUATORS Quarter - Turn / 90ᵒ Rotation High intelligence High protection Compact size Robust construction High integration Excellent performance Aluminium processed
More informationScotch Yoke Actuators 2016 EDITION. Heavy Duty Pneumatic Actuators SHD and CHD series. The Best Way To Automate Your Process.
The Best Way To Automate Your Process Heavy Duty Pneumatic Actuators SHD and CHD series Scotch Yoke Actuators 2016 EDITION Max-Air Technology, Inc. 751 Hoff Rd O Fallon, Missouri 63366 Tel: +1.636.272.4934
More informationV SWISS MADE LINEAR TECHNOLOGY
Compact units Excerpt from main catalogue SWISS MADE LINEAR TECHNOLOGY V 11-15 Line Tech compact units Table of contents Product overview 106 107 Design fundamentals / Lubrication / Maintenance 108 Profile
More informationMT 4000 C TOUCHLESS 1. TOUCHSCREEN INTERFACE MULTIFUNCTION BUTTON Further speed-up of different routines and programs selection.
MT 4000 C TOUCHLESS MT 4000 C TOUCHLESS 1. TOUCHSCREEN INTERFACE - 1 The user-friendly graphic interface, together with the latest touchscreen technology on 22 widescreen monitor simplify and speed-up
More informationESBE Series 90 Electronic Motor Actuator (Combined with ESBE 3&4-Way Rotary Valves)
Features: 91, 92, 93 series The ESBE 24 volt electronic series of motors are direct mounted actuators that rotate ESBE 3 & 4-way rotary valves for hydronic heating and cooling systems. The Series 90 actuator
More information1 HR-301/D Parts Manual. Table Of Contents
Table Of Contents 301/D Parts Manual 3 Point Hitch...2 Pull-Type Hitch...4 Main Frame...6 Angle Adjuster - Serial Number 44982 & Prior...8 Rotor Assembly - Serial Number 44982 & Prior...10 Rotor Assembly
More informationDA-053 Series. Overview. Applications. Features & Benefits. Datasheet. 53lb-in (6 Nm), Non-Spring Return Damper Actuators
Datasheet 53lb-in (6 Nm), Non-Spring Return Damper Actuators Overview The direct-coupled fail-safe/failin-place electronic actuators are designed for modulating, two position, and floating control of laboratory
More informationSECTION G2: CABLE PROCESSOR MODULE MAINTENANCE
SECTION G2: CABLE PROCESSOR MODULE MAINTENANCE Cable Processor Module overview WARNING! When tipping the Cable Processor Module back, (after removing the toggle arm pin), use extreme caution not to drop
More informationwork done faster, safer & more efficiently. MeridianAugers.com At Meridian, we want to help our customers get their
Make your move. At Meridian, we want to help our customers get their safer & more efficiently. Our products are designed with the features that farmers need and constructed using high-quality parts and
More informationSKD62UA Series Electronic Valve Actuator, Advanced Features
Document No. 29-69 October 6, 22 SKD62UA Series Electronic Valve Actuator, Advanced Features Product Description The SKD62UA electronic valve actuator requires a 24 Vac supply and receives a to Vdc or
More informationLinear actuators ILA Series
Linear Actuator ILA Series without input drive, with flange and input shaft Linear Actuator ILA Series with input drive - with 2 bevel gearmotors - with single bevel gearmotor - with helical coaxial or
More informationSYSTEMS FOR VEHICLE TESTING SYSTEMS REV M KIT AND REV A KIT
136 SYSTEMS FOR VEHICLE TESTING SYSTEMS REV M KIT AND REV A KIT Extraction kits for testing centres for cars, light commercial vehicles and heavy vehicles with manual or automatic return system Equipments
More informationSERIES 1000 ELECTRIC ACTUATORS
DESIGN FEATURES Series 1000 On-Off Rotary Electric Actuator Basic Actuator: Torque Output Range: 347in-lb to 17,359in-lb Housing: NEMA 4X, watertight, corrosion-resistant, robust aluminum die cast Electric
More informationRUS-L24-MOD Electric 24 Volt Modulating Control Damper Actuator
3900 Dr. Greaves Rd. Kansas City, MO 64030 (816) 761-7476 FAX (816) 765-8955 RUS-L24-MOD Electric 24 Volt Modulating Control Damper Actuator DIRECT COUPLED SPRING RETURN DESCRIPTION Ruskin model RUS-L24-MOD
More informationBIFFI MORIN S SERIES ACTUATORS
Stainless steel spring return and double acting pneumatic quarter-turn actuators Output torques to 240,000 lb.in. FEATURES AND BENEFITS GENERAL APPLICATIONS For remote control of any quarter-turn application:
More informationValtek Auxiliary Handwheels and Limit Stops
Valtek Auxiliary s and Limit Stops Table of Contents Page 1 General information 2 Installation 2 Side-mounted handwheels, size 25 and 50 (linear actuators) 3 Side-mounted handwheels, size 100 and 200 (linear
More informationBALENA. AIR DRILL Hoe drill
AIR DRILL Hoe drill 2 Contents Benefits and applications 4 Tines - seed delivery and soil tillage 6 Hoe drill tines 8 Machine wheels 10 Seed and fert cart 12 Cart wheels 14 Commitment and experience 16
More informationModule 13: Mechanical Fuel Injection Diagnosis and Repair
Terms and Definitions Parts of Injection Nozzles Types of Nozzle Valves Operation of an Injection Nozzle Fuel Flow Through the Unit Injector Optional Features on Fuel Injection Pumps Main Parts of a Distributor-Type
More informationElectric cylinders CASM-100
Electric cylinders CASM-100 Contents Electric cylinder CASM-100.............................4 Product description.................................5 System overview...................................6
More informationACME SCREW LINEAR ACTUATOR. Current [A] PERFORMANCES with AC 3-phase 50 Hz 230/400 V or 1-phase 50 Hz 230 V motor
ACME SCREW LINEAR ACTUATOR CLA 28 OVERALL DIMENSIONS La = Lc + Stroke Stroke Lc T Standard head with threaded hollow bore BA Motor cable length 0.3 m Bronze bushes depth 17 Lc [mm] T [mm] Length [mm] +
More informationOriginal Spare parts. for SpriMag and aisa internal COating MaChineS and OvenS
Original Spare parts for SpriMag and aisa internal COating MaChineS and OvenS INDEX 1 Index 1 Index 2 Paint Supply and Spraying Technology 2.1 Paint Supply 2.1.1 Pressure Pot 2.1.2 Paint Filter and Accessories
More informationELECTRIC ACTUATOR 94OE IOM. E024, EO25, E026, EO29 & E030 Installation Operation and Maintenance Instructions TABLE OF CONTENTS
ELECTRIC ACTUATOR E024, EO25, E026, EO29 & E030 Installation Operation and Maintenance Instructions TABLE OF CONTENTS 94OE IOM Electric Actuator Specifications...2 Overview...3 Actuator Wiring Diagrams...4
More informationCMX MOTORCYCLES.HONDA.COM.AU
CMX MOTORCYCLES.HONDA.COM.AU A fresh take on custom cool, the CMX500 mixes old- and new-school style and is engaging and fun to ride, with an outlook geared toward firing the imagination of a younger generation
More informationKeystone F89C Pneumatic Quarter-Turn Actuator Chemical Industry / Hazardous area
The F89C addresses the specific requirements for automated quarter-turn valves in the chemical industry on top of the reliability and low maintenance cost offered Features Valve connection compatible with
More informationElectric Actuator Instructions
BAC IOM Electric Actuator Instructions E024, E025, E026, E029 & E030 TABLE OF CONTENTS Electric Actuator Specifications...2 Overview...3 Actuator Wiring Diagrams...4 VMS-35 Specifications and Wiring Diagram...5
More informationC-SERIES S-SERIES EMA LINEAR ACTUATORS. Metric Machine Screw Jacks.
C-SERIES S-SERIES Metric Machine Screw Jacks EMA LINEAR ACTUATORS 0i 02 Power Jacks has a proud engineering heritage dating from the earliest years of the 20th Century. A heritage that is about excellence:
More informationPRODUCT INFORMATION. VZ Light Commercial Vehicles Ute, Crewman and One Tonner
23 August 2004 PRODUCT INFORMATION VZ Light Commercial Vehicles Ute, Crewman and One Tonner Development Cost $11 million. Quality Validation 1.6 million durability and test kilometres (VZ sedans) 113,000
More informationM x Series Cast Iron Flanged Valve Linkage Kit for Tandem Mounting of M9000 Series Electric Actuators
Issue Date June 15, 2007 Supersedes November 15, 2002 M9000-53x Series Cast Iron Flanged Valve Linkage Kit for Tandem Mounting of M9000 Series Electric Actuators Installation Parts Included Linkage Stem
More informationMachines from the MULTIMATIC series are used all over the world. They are distinguished by their wide range of possibilities for use, high weight
44 Dough Dividing & Moulding Machine Machines from the MULTIMATIC series are used all over the world. They are distinguished by their wide range of possibilities for use, high weight precision, solid design,
More information300 & 400 Series Positioning Tables
300 & 400 Series Positioning Tables 300 Series Introduction L-2 400 Series Introduction L-3 Specifications L-5 300 Series Dimensions L-6 400 Series Dimensions L-7 300 Series Motor Couplings L-8 300 Series
More informationPERFORMANCE with: Duty Cycle Fi = 100 % over 10 min. at 25 C environment
5.1 BALL SCREW LINEAR ACTUATOR BSA 10 Compact ball screw linear actuator with integral electric motor suitable for push and pull motions. Rolled and hardened ball screw. Case hardened and ground ball nut.
More informationSECTION I: INDEX. Accumulator, injection B1-15 maintenance G1-12. Cable termination equipment A-3
SECTION I: INDEX A Accumulator, injection B1-15 maintenance G1-12 Alignment, nozzle seat/nozzle tip E- 4 checking G1-18 correcting poor alignment G1-18 procedure, nozzle alignment G1-16 Alloy D-3 contamination
More informationHPA LARGER SERIES AC ELECTRIC MOTOR
HPA LARGER SERIES AC ELECTRIC MOTOR HPA LARGER SERIES AC ELECTRIC MOTOR 25 O 25 P = N N.4 ø 14 = A C ø1/4"bsp with plug F G N.2 M E EMMEGI SpA www.emmegi-heat-exchangers.com DESIGN AND MANUFACTURE OF
More informationAutomatic Surface Grinder SGE Series
Automatic Surface Grinder SG Series PRCISION MACHIN TOOLS Sharp Industries, Inc. 3501 Challenger Street Torrance, CA 90503 Tel 310-370-5990 Fax 310-542-6162 mail: info@sharp-industries.com Parts: parts@sharp-industries.com
More informationFlowrite EA 599 Series SQX Electronic Valve Actuator 24 Vac, 3-Position Control
Flowrite EA 599 Series SQX Electronic Valve Actuator 24 Vac, 3-Position Control Technical Instructions EA 599-7 Description The Flowrite EA 599 Series SQX electronic valve actuator requires a 24 Vac supply
More informationDDH hydraulic series. Spring return & double acting Compact actuator DUXVALVES B.V. BORNSESTRAAT PB ALMELO, THE NETHERLANDS
DDH hydraulic series Spring return & double acting Compact actuator DUXVALVES B.V. BORNSESTRAAT 321 7601 PB ALMELO, THE NETHERLANDS TEL : +31(0)546-458347 FAX : +31(0)546-458351 Applications The Duxdrive
More informationTPV Variable Displacement Closed Loop System Axial Piston Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 852 / 0815 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
More informationMECHANICAL Forging PRESSES WITH KNUCKLE-JOINT
MECHANICAL Forging PRESSES WITH KNUCKLE-JOINT MML / MSL. Mechanical Forging Presses with knuckle-joint. From process development and cost-effective line concepts to full production lines. MECHANICAL Forging
More information