Additions Within Current Ranges. Page Page CEJN MultiFlow Air & Fluid Guns HOZELOCK. Hose Reels. Page Page 18.

Transcription

1 New Products Page Page CEJN MultiFlow Air & Fluid Guns HOZELOCK Hose Reels Page Page CEJN MultiFlow Display Pack HOZELOCK Hose & Connectors Page Page Page Page STEINER Hose & Cable Reels HOZELOCK Hose Fittings REELCARE Hose Reels HOZELOCK Sprayers Additions Within Current Ranges Page REDASHE Mounting Brackets

2 Blow Guns, Water Guns, Hose Reels & Balancers CEJN 208 Blow Gun Series CEJN MultiFlow Air & Fluid Gun CEJN 208 Blow Gun Accessories COIL Blow Guns PARKAIR Water Gun COIL 600 Series Metal Blow Guns COIL High Volume Blow Guns PARKAIR Free-Angle Fittings COIL 600 Series Metal Blow Gun Accessories PARKAIR Vacuum Blow Guns PARKAIR Tool Balancers CEJN Hose & Cable Reels REELCARE Hose Reels STEINER Hose & Cable Reels REDASHE Hose & Cable Reels NEDERMAN Hose Reels HOZELOCK Hose Reels HOZELOCK Hose & Hose Connectors HOZELOCK Sprayers

3 BLOW GUNS - SERIES 208 Easy connection Ergonomically designed for comfortable handling Suspension possible by both the built-in hook and the handle The normal grip is adjusted to fit the hand during normal usage Extremely durable acetal plastic that also isolates against cold media Infinitely variable airflow with high volume flow for efficient cleaning SPECIFICATIONS Airflow at inlet pressure of 6 bar (87 PSI) Max working pressure Temperature range 500 l/m (18 CFM) Standard Blowguns: 16 bar (232 PSI) Safety Blowguns: 8 bar (116 PSI) -20 C to +60 C (-4 F to +140 F) APPLICABLE SAFETY STANDARDS The products with the OK symbol are compliant with the OSHA directive STD ( (b) when dead ending occurs static pressure at the main orifice shall not exceed 30psi (2bar). The products with the EAR symbol are compliant with the International Standard ISO Pneumatic Fluid Power and OSHA Occupational Noise Exposure. These products have a sound level below 85 db(a) and meet the EU Machine Directive concerning noise reduction demands. BLOW GUN WITHOUT NOZZLE 1/4 BSP C Blow Gun, No Nozzle Supplied BLOW GUN WITH REGULATOR 1/4 BSP C Blow Gun 90mm, Automatic Shut-Off Outlet pressure when dead ended: 2 bar (29 PSI) BLOW GUN WITH 90MM TUBE 1/4 BSP C Blow Gun, Non-Removable Nozzle C Blow Gun, Removable Nozzle BLOW GUN WITH STAR-TIP 1/4 BSP C Blow Gun 90mm, Non-Removable Nozzle C Blow Gun 90mm, Removable Nozzle CEJN Hose Reels Page Sturdy housing protects enclosed cable or hose Strong and durable High flow capacity

4 BLOW GUN ACCESSORIES - SERIES 208 NOZZLES FOR USE WITH C / C MM TUBE C AIR CURTAIN NOZZLE C MM TUBE REGULATOR C BY-PASS NOZZLE C EXTENSION TUBE C mm Tube C mm Tube SILENCER C C C Silencer 8.28 C Silencer Nozzle MM FLEXIBLE TUBE C VENTURI NOZZLE C RUBBER TIP NOZZLE C C mm Rubber Tip 5.65 C mm Rubber Tip 7.11 C mm Rubber Tip C Piece Rubber Tip Kit C Rubber Tip Nozzle 5.10 C is threaded to fit directly to blowgun body CHIP SHIELD C Translucent Shield Diameter 100mm 5.00 NOZZLES FOR USE WITH C MM STAR-TIP TUBE C STAR-TIP EXTENSION TUBE C mm Tube, Star-Tip C mm Tube, Star-Tip

5 MULTIFLOW AIR AND FLU GUN DESCRIPTION CEJN s new MultiFLOW blowgun effectively cleans surfaces with air or water with unparalleled blowing force. Precise flow is achieved by adjustable flow settings. Nozzle adjusts from narrow jet to wide beam. The MultiFLOW meets and exceeds OSHA safety standards when dead-ended. Unmatched blowing force Adjustable flow control Adjustable beam SPECIFICATIONS Air flow Fluid flow Air sound level Max working pressure Min burst pressure Temperature 16 bar Temperature 10 bar Media MATERIALS Body Seal l/min (7-18 CFM) 5-25 l/min ( GPM UK) dba 16 bar (232 PSI) 64 bar (928 PSI) -20 C to +60 C (-4 F to +140 F) -20 C to +80 C (-4 F to +176 F) Air and non-explosive water based liquids POM, TPE, aluminium NBR (Nitrile) APPLICABLE SAFETY STANDARDS The products with the OK symbol are compliant with the OSHA directive STD ( (b) when dead ending occurs static pressure at the main orifice shall not exceed 30psi (2bar). The products with the EAR symbol are compliant with the International Standard ISO Pneumatic Fluid Power and OSHA Occupational Noise Exposure. These products have a sound level below 85 db(a) and meet the EU Machine Directive concerning noise reduction demands. MULTIFLOW BLOW GUN CONNECTION C Nipple MULTIFLOW BLOW GUN CONNECTION C /4 Adaptor MULTIFLOW DISPLAY PACK EIGHT PACK CONNECTION C /4 Adaptor

6 BLOW GUNS BUTTON BLOW GUN Compact design Economical alternative to lever operated and pistol grip types Rugged construction withstands rough handling IN-LINE BLOW GUN Compact, durable with maximum flow Ideal for at-the-tool use Chrome-plated zinc body APPLICABLE SAFETY STANDARDS The products with the OK symbol are compliant with the OSHA directive STD ( (b) when dead ending occurs static pressure at the main orifice shall not exceed 30psi (2bar). The products with the EAR symbol are compliant with the OSHA Occupational Noise Exposure. These products have a sound level below 85 db(a). BUTTON BLOW GUN CO-661 Rubber Tip Blow Gun IN-LINE BLOW GUN CO-641 In-Line Blow Gun with Rubber Tip BUTTON BLOW GUN CO-665 Brass Non-Safety Tip Blow Gun 8.81 IN-LINE BLOW GUN CO-640S In-Line Blow Gun with Safety Tip 9.41 BUTTON BLOW GUN CO-660S Brass Safety Tip Blow Gun WATER GUNS AND BLOW GUNS PARKAIR Heavy duty rubber cover Instantly adjustable spray pattern Watertight - can be used inside or outside Caustic and fat resistant SPECIFICATIONS Water pressure rating Up to 215 PSI Temperature rating Up to +80 C (Up to +175 F) All metal water hose gun Sturdy construction Release of handle provides instant shut off RI-JAC METAL WATER GUN LOW WATER GUN SELF CLOSING 4050 RWG2 1/2 BSPP RJET1 Ri-Jac Water Gun BLOW GUN WITH SAFETY NOZZLE 4630 ABG1-14 1/4 BSP ports

7 600 SERIES METAL BLOW GUNS Durable zinc die-cast body Ergonomic design and large operating lever to reduce fatigue and discomfort Chrome plated finish for superior corrosion resistance SPECIFICATIONS Pressure rating 10 bar (150 PSI) Temperature range 0 C to +80 C (32 F to +175 F) APPLICABLE SAFETY STANDARDS The products with the OK symbol are compliant with the OSHA directive STD ( (b) when dead ending occurs static pressure at the main orifice shall not exceed 30psi (2bar). The products with the EAR symbol are compliant with the OSHA Occupational Noise Exposure. These products have a sound level below 85 db(a). SAFETY BLOW GUN 1/4 BSPT INLET X 1/8 NPSM OUTLET CO-600SDL Standard Safety Gun 9.11 SAFETY BLOW GUN 1/4 BSPT INLET X 1/8 NPSM OUTLET CO-600FF06 6 Flexible Safety Extension Gun CO-600FF12 12 Flexible Safety Extension Gun SAFETY BLOW GUN 1/4 BSPT INLET X 1/8 NPSM OUTLET CO-600STDL Tamper-Proof Gun STANDARD BLOW GUN 1/4 BSPT INLET X 1/8 NPSM OUTLET CO-600NT1W Basic Gun 8.66 Meets OSHA requirements when used with safety tips SAFETY BLOW GUN 1/4 BSPT INLET X 1/8 NPSM OUTLET CO-600SB Safety Booster Gun STANDARD BLOW GUN 1/4 BSPT INLET X 1/8 NPSM OUTLET CO-601 Rubber Tip Gun SAFETY BLOW GUN 1/4 BSPT INLET X 1/8 NPSM OUTLET CO-600SS Safety Shield Gun STANDARD BLOW GUN 1/4 BSPT INLET X 1/8 NPSM OUTLET CO-602 Siphon Tip Gun SAFETY BLOW GUN 1/4 BSPT INLET X 1/8 NPSM OUTLET CO-603S 3 Safety Extension Gun CO-606S 6 Safety Extension Gun CO-608S 8 Safety Extension Gun CO-610S 10 Safety Extension Gun CO-612S 12 Safety Extension Gun CO-616S 16 Safety Extension Gun CO-618S 18 Safety Extension Gun CO-624S 24 Safety Extension Gun CO-630S 30 Safety Extension Gun CO-636S 36 Safety Extension Gun STANDARD BLOW GUN 1/4 BSPT INLET X 1/8 NPSM OUTLET CO-801 Steel Brush Gun CO-802 Nylon Brush Gun CO-803 Horsehair Brush Gun

8 600 SERIES METAL BLOW GUN ACCESSORIES REPLACEMENT TIPS RUBBER TIP 1/8 NPSM CO-SAT SIPHON TIP 1/8 NPSM CO-SAT BRASS TIP 1/8 NPSM CO-SAT BRUSH TIP 1/8 NPSM CO-811 Steel Brush CO-822 Nylon Brush CO-833 Horsehair Brush FLEXIBLE NYLON SHAFT 1/8 NPSM CO-FLX TIP 1/8 NPSM CO-STT32 Telescoping (8-36 ) NEEDLE TIPS NEEDLE TIPS 1/8 NPSM SIZE CO-SNT x 1.5/ CO-SNT x 1.3/ CO-SNT x 1.3/ CO-SNT x 2.15/ CO-SNT x 2.3/ NEEDLE TIP ASSORTMENT 1/8 NPSM CO-SNTKIT Assortment of Tips SAFETY TIPS FOR USE WITH CO-600NT1W SAFETY STANDARD 1/8 NPSM CO-ST SAFETY BOOSTER 1/8 NPSM CO-ST SAFETY EXTENSION 1/8 NPSM CO-ST203 3 Straight Safety Extension 6.88 CO-ST206 6 Straight Safety Extension 8.59 CO-ST208 8 Straight Safety Extension 9.18 CO-ST Straight Safety Extension CO-ST Straight Safety Extension CO-ST Straight Safety Extension CO-ST Straight Safety Extension CO-ST Straight Safety Extension CO-ST Straight Safety Extension CO-ST Straight Safety Extension SAFETY SHIELD 1/8 NPSM CO-ST SAFETY EXTENSION 1/8 NPSM CO-STFF06 6 Flexible Safety Extension CO-STFF12 12 Flexible Safety Extension

9 HIGH VOLUME BLOW GUNS Lightweight, high flow design For heavy-duty clean-up and blow-off Variable flow trigger for controlled blow-off 2500 Series comes with a high flow tip, the 3800 series comes with a muti-jet tip SPECIFICATIONS 2500 Series 3800 Series Sound 125 PSI 85 Db 80 Db Flow 125 PSI 34 CFM 51 CFM Thrust 2.1 lbs 3.1 lbs APPLICABLE SAFETY STANDARDS The products with the OK symbol are compliant with the OSHA directive STD ( (b) when dead ending occurs static pressure at the main orifice shall not exceed 30psi (2bar). The products with the EAR symbol are compliant with the OSHA Occupational Noise Exposure. These products have a sound level below 85 db(a). TYPHOON HIGH VOLUME BLOW GUNS TYPHOON BLOW GUN TIPS HIGH FLOW TIPS 2500 SERIES 1/4 BSPP CO-TYP2502 High Flow Tip Blow Gun CO-TYP Extension High Flow Tip Blow Gun CO-TYP Extension High Flow Tip Blow Gun CO-TYP Extension High Flow Tip Blow Gun CO-TYP Extension High Flow Tip Blow Gun CO-TYP Extension High Flow Tip Blow Gun CO-TYP Extension High Flow Tip Blow Gun CO-TYP Extension High Flow Tip Blow Gun CO-TYP Extension High Flow Tip Blow Gun CO-HFN-00M With Male Pipe Thread 4.23 CO-HFN-11M Chrome-Plated - With Male Pipe Thread 9.26 CO-HFN-00F With Female Pipe Thread 4.23 CO-EXT06CN 6 Extension High Flow Tip CO-EXT12CN 12 Extension High Flow Tip CO-EXT18CN 18 Extension High Flow Tip CO-EXT24CN 24 Extension High Flow Tip CO-EXT36CN 36 Extension High Flow Tip CO-EXT48CN 48 Extension High Flow Tip CO-EXT60CN 60 Extension High Flow Tip CO-EXT72CN 72 Extension High Flow Tip MULTI-JET TIPS 3800 SERIES 3/8 BSPP CO-TYP3802 Multi-Jet Tip Blow Gun CO-TYP Extension & Multi-Jet Tip Blow Gun CO-TYP Extension & Multi-Jet Tip Blow Gun CO-TYP Extension & Multi-Jet Tip Blow Gun CO-TYP Extension & Multi-Jet Tip Blow Gun CO-TYP Extension & Multi-Jet Tip Blow Gun CO-TYP Extension & Multi-Jet Tip Blow Gun CO-TYP Extension & Multi-Jet Tip Blow Gun CO-TYP Extension & Multi-Jet Tip Blow Gun CO-MJN-O Multi-Jet Tip CO-EXT06MJ 6 Extension Multi-Jet Tip CO-EXT12MJ 12 Extension Multi-Jet Tip CO-EXT18MJ 18 Extension Multi-Jet Tip CO-EXT24MJ 24 Extension Multi-Jet Tip CO-EXT36MJ 36 Extension Multi-Jet Tip CO-EXT48MJ 48 Extension Multi-Jet Tip CO-EXT60MJ 60 Extension Multi-Jet Tip CO-EXT72MJ 72 Extension Multi-Jet Tip EXTENSIONS CO-EXT-1 CO-EXT-1 1 Extension & Coupling 3.91 CO-EXT-2 2 Extension Only 3.32 CO-EXT-6 6 Extension Only 5.40 CO-EXT Extension Only 7.50 CO-EXT Extension Only 8.53 CO-EXT Extension Only 9.60 CO-EXT Extension Only CO-EXT Extension Only CO-EXT Extension Only CO-EXT Extension Only

10 VACUUM BLOW GUNS Made from nylon 6 abrasive resistant material Low air consumption Hand held or static site Blow or vacuum Use filtered PSI / 10mm bore air line SPECIFICATIONS LVM 22 LVM AP PSI 9 in / 54 out 9 in / 54 out 100 PSI 14.5 in / out 14.5 in / out Air inlet size 1/4 BSPT male 1/4 compression fitting Conveying hose bore 32 mm 32 mm PARKAIR SAFETY We recommend that dry filtered compressed air and appropriate safety equipment is used with this product. SEE SECTION 3 FOR FRL s For optimum performance the air feed line should be at least 3/8 bore. VACUUM BLOW GUNS ACCESSORIES DUST BAG KIT REVERSIBLE AIR GUN 2700 LVM22 Hand Held LVM22-1 c/w clip & crevice nozzle EXTENSION TUBE 2700 LVM REVERSIBLE AIR PUMP 2700 LVMAP22 Static Site (Inlet Size 5/16 ) CREVICE NOZZLE 2700 LVM ROUND BRUSH DEEP HOLE GUN 2700 LVM22D/H For Blind Holes Up To 450mm Deep LVM mm diameter 7.60 CONVEYING 2700 LVM metre length 7.29 Air Preparation Products Section 3 Filters, Regulators and lubricators Adaptors Adaptors with sealing rings

11 FREE-ANGLE FITTINGS Greatly reduces the incidence of repetitive strain injuries such as carpel tunnel syndrome and back stress Lightweight and streamline design Two rotation points prevent kinking of the supply hose Steel construction for maximum service life Rotating joint is supplied with dust cover Full 7mm flow APPLICATIONS Assembly operations in the automotive and electronic industries and spray painting Mechanical joints for robotics SPECIFICATIONS Medium Compressed air Working temperature -5 C to +60 C (23 F to 140 F) Max. working pressure 1Mpa (10.2Kgf/cm 2 ) 145PSI Materials Nickel-plated steel, NBR seal PARKAIR NICKEL-PLATED STEEL CENTRE COVER NBR RUBBER CENTRE COVER FEMALE THREAD X MALE THREAD 3450 CHNFAG2F-2M 1/4 BSPT Female x 1/4 BSPT Male MALE THREAD X MALE THREAD 3450 CH3FA2M-2M 1/4 BSPT Male x 1/4 BSPT Male EURO STANDARD NIPPLE X MALE THREAD 3450 CHNFAP2M Nipple x 1/4 BSPT Male EURO STANDARD NIPPLE X MALE THREAD 3450 CH3FAP3M Nipple x 3/8 BSPT Male FREE ANGLE FITTINGS EURO STANDARD NIPPLE X MALE THREAD 3450 CO-11-04BS 320 Nipple x 1/4 BSPT EURO STANDARD NIPPLE X FEMALE THREAD 3450 CO-11-04BSF 320 Nipple x 1/4 BSPP Female

12 TOOL BALANCERS PARKAIR FLEX TYPE A FEATURES High impact resistant composite housing 7 Models selected for a load range from 0 to 3.5 kgs Adjustable spring load throughout and ergonomic handgrip knob Adjustable rope stroke Available with nylon braided rope or steel braided nylon coated wire Tools in conformity with CE directives FLEX TYPE B FEATURES Metal housing 14 Models selected for a load range from 0.5 to 11 kgs Adjustable spring load throughout and safety removable handle Adjustable rope stroke Available with nylon braided rope or steel braided nylon coated wire Tools in conformity with CE directives FLEX TYPE A NYLON BRAED ROPE LOADING CAPACITY WEIGHT CORD SF kg 0.3 kg 2.3 mtrs SF kg 0.35 kg 2.3 mtrs SF kg 0.4 kg 2.3 mtrs SF kg 0.4 kg 2.3 mtrs STEEL BRAED NYLON COATED WIRE SF05-1A kg 0.35 kg 2.3 mtrs SF1-2A 1-2 kg 0.4 kg 2.3 mtrs SF2-35A kg 0.4 kg 2.3 mtrs FLEX TYPE B NYLON ROPE LOADING CAPACITY WEIGHT CORD FLEX kg 0.6 kg 2.3 mtrs FLEX kg 0.6 kg 2.3 mtrs FLEX kg 0.65 kg 2.3 mtrs FLEX kg 0.65 kg 2.3 mtrs FLEX kg 1.64 kg 2.3 mtrs FLEX kg 1.7 kg 2.3 mtrs FLEX kg 1.75 kg 2.3 mtrs STEEL BRAED NYLON COATED WIRE FLEX05-1A kg 0.6 kg 2.3 mtrs FLEX05-15A kg 0.6 kg 2.3 mtrs FLEX1-2A 1-2 kg 0.65 kg 2.3 mtrs FLEX2-35A kg 0.65 kg 2.3 mtrs FLEX3-6A 3-6 kg 1.64 kg 2.3 mtrs FLEX5-85A kg 1.7 kg 2.3 mtrs FLEX8-11A 8-11 kg 1.75 kg 2.3 mtrs FLEX TYPE C FEATURES Metal housing 10 Models selected for a load range from 1 to 70 kgs Adjustable spring load Adjustable rope stroke Steel rope Safety device against spring break off Tools in conformity with CE related directives MATIC FEATURES Composite housing 3 Models selected for a load range from 0.5 to 5 kgs Adjustable spring load 6.5 x 10 mm soft braided polyurethane hose Adjustable hose stroke Tools in conformity with CE directives FLEX TYPE C LOADING CAPACITY WEIGHT CORD 4610 FLEX kg 1.4 kg 1.5 mtrs FLEX kg 1.5 kg 1.5 mtrs FLEX kg 3.4 kg 1.5 mtrs FLEX kg 3.8 kg 1.5 mtrs FLEX kg 7.2 kg 1.5 mtrs FLEX kg 8.5 kg 1.5 mtrs FLEX kg 9.8 kg 1.5 mtrs FLEX kg 10.4 kg 1.5 mtrs FLEX kg 11.6 kg 1.5 mtrs FLEX kg 11.8 kg 1.5 mtrs MATIC LOADING CAPACITY WEIGHT CORD 4610 MATIC kg 1.6 kg 1.6 mtrs MATIC kg 1.7 kg 1.6 mtrs MATIC kg 1.8 kg 1.6 mtrs MATIC Hose Diameter internal 6.5 / external

13 COMPRESSED AIR REELS SERIES High flow capacity Low pressure drop Strong and durable SPECIFICATIONS Hose Feeder hose length Working pressure Temperature range COMPRESSED AIR REELS 1/4 MALE CONNECTION ANTI-SPARK BRAED PUR SIZE X Braided PUR 2m (6.5 ft) See table -20 C to +60 C (-4 F to +140 F) WORKING C x 13.5 mm 10 mtrs 16 bar COMPRESSED AIR REELS 1/4 MALE CONNECTION SIZE X WORKING C x 12.0 mm 7 mtrs 16 bar C x 10.0 mm 9 mtrs 16 bar C x 12.0 mm 10 mtrs 16 bar C x 13.5 mm 14 mtrs 12 bar C x 12.0 mm 16 mtrs 16 bar /2 MALE CONNECTION C x 16.0 mm 10 mtrs 12 bar WATER REELS SERIES Suitable for damp or wet environments Compatible with water-based fluids, such as acetylene glycol Strong and durable SPECIFICATIONS Hose Braided PUR Feeder hose length 2m (6.5 ft) Working pressure See table Temperature range -5 C to +60 C (-41 F to +140 F) WATER REELS 1/4 MALE CONNECTION SIZE X WORKING C x 13.5 mm 14 mtrs 9 bar ELECTRICAL CABLE REELS SERIES Sturdy housing protects enclosed cable and reel mechanism Strong and durable Flexible high quality rubber cable Supplied with a thermal overload protection circuit SPECIFICATIONS Cable PVC Current 16 ampere Voltage 230V Connection Schuko plug Power output 1000W fully wound, 3500W fully unwound Protection class IP 23 Temperature range +5 C to +60 C (+41 F to +140 F) ELECTRICAL CABLE REELS 610 DIMENSIONS DIAMETER C x 1.5 mm 2 10 mtrs 330 mm C x 1.5 mm 2 17 mtrs 430 mm

14 & CABLE REELS ELECTRIC REELS - PREMIUM SERIES IP 42 environment tested Red LED power indicator Rubber / neoprene cable H07RN-F - comfortable handling even at very low temperatures True rollable working length - store the cable completely back to the reel Revolving hinge with 200 rotation - easy to reach your application accurately SPECIFICATIONS 360 Series 362 Series Hose Rubber Rubber Feeder cable length 1m (3ft) 1m (3ft) Power capacity 2300W / 10A 3000W / 13A Temperature range -20 C to +60 C -20 C to +60 C ELECTRICAL CABLE REELS SMALL SERIES DIMENSIONS CABLE POWER ST x 1.5 mm 2 6 mtrs 2300W MEDIUM SERIES ST x 1.5 mm 2 15 mtrs 3000W AIR REELS - PREMIUM SERIES Casting made in shock proof PP/Polypropylene - suitable for tough environments Ultra-lightweight & soft PU braided hose - comfortable handling even at very low temperatures True rollable working length - store the hose completely back to the reel Full-flow axle design Revolving hinge with 200 rotation - easy to reach your application accurately SPECIFICATIONS 314 Series 315 Series Hose 100% PUR (soft Ester) 100% PUR (soft Ester) Feeder hose length 1.0m (3.3ft) 1.5m (5ft) Capacity (at 0.5 bar) 290 l/min (4.8 l/sec) <600 l/min (10 l/sec) Thread in / out 1/4-1/4 BSPT 1/4-1/4 BSPT Temperature range -20 C to +60 C -20 C to +60 C AIR REELS SMALL SERIES SIZE X WORKING 2810 ST x 10.0 mm 6 mtrs 16 bar MEDIUM SERIES ST x 12.0 mm 12 mtrs 16 bar ST x 13.0 mm 10 mtrs 16 bar STEEL CASING AIR REELS - PREMIUM SERIES All mechanical parts made in metal - suitable for very tough environments Ultra-lightweight & soft PU braided hose - comfortable handling even at very low temperatures True rollable working length - store the hose completely back to the reel Full-flow axle design Revolving hinge with 200 rotation - easy to reach your application accurately SPECIFICATIONS 320 Series Hose ST % PUR (soft Ester) ST PUR / PVC mix Feeder hose length 1.5m (5ft) Capacity (at 0.5 bar) <600 l/min (10 l/sec) Thread in / out 1/4-1/4 BSPT Temperature range -30 C to +60 C STEEL CASING AIR REELS MEDIUM - STANDARD 320 SERIES SIZE X WORKING 2810 ST x 13.0 mm 12 mtrs 20 bar MEDIUM - SPARKPROOF 320 SERIES ST x 14.0 mm 10 mtrs 20 bar

15 REELS STEEL OPEN REELS - PREMIUM SERIES Open reel design in all steel with brass axle - suitable for tough environments Ultra-lightweight PU braided hose - for industrial environments or high grade and lightweight, heavy duty rubber hose - for grinding or other spatter environments Full-flow axle design True rollable working length Revolving hinge - easy to reach your application accurately SPECIFICATIONS 334 Series 335 Series Hose see table see table Capacity (at 0.5 bar) <1500 l/min (25 l/sec) <1500 l/min (25 l/sec) Thread in / out 1/4-3/8 BSPT 3/8-3/8 BSPT Temperature range -30 C to +60 C -30 C to +60 C STEEL OPEN REELS - ESTER-PUR MEDIUM SERIES SIZE X WORKING ST x 14 mm 15 mtrs 20 bar LARGE SERIES ST x 18 mm 15 mtrs 20 bar STEEL OPEN REELS - BARE REELS MEDIUM SERIES SIZE CAPACITY THREAD IN ST / 13 / 16 mm < 20 mtrs 3/8 BSPP LARGE SERIES ST / 13 / 16 mm < 20 mtrs 3/8 BSPP BASE FOR PREMIUM OPEN REELS 2810 ST For use with Series 334 and 335 reels STEEL OPEN REELS - RUBTECH RUBBER MEDIUM SERIES SIZE X WORKING 2810 ST x 17 mm 15 mtrs 16 bar LARGE SERIES ST x 20 mm 15 mtrs 16 bar MTR LEAD - FLEXIBLE CUT ULTRAFLEX PUR 2810 SIZE SERIES ST x 14 mm ST x 18 mm RUBTECH RUBBER ST x 17 mm ST x 20 mm PORTABLE REELS - PREMIUM SERIES Lightweight design Wide stand base with rubber buffers Twice the airflow of comparable handreels Wall mount adapter included SPECIFICATIONS ST ST Hose 100% Ester - PUR 100% Ester - PUR Feeder hose length 1.5m (5ft) 1.5m (5ft) Capacity (at 0.5 bar) <500 l/min (8.3 l/sec) <200 l/min (3.4 l/sec) Thread in / out 1/4 BSPP HP - Coupler / nipple Temperature range -30 C to +60 C -30 C to +60 C PORTABLE REELS STANDARD SIZE X WORKING 2810 ST x 13.0 mm 25 mtrs 16 bar HIGH ST x 10.0 mm 30 mtrs 35 bar

16 REELS GEN III SERIES Durable yet economical Lightweight and easy to operate Manufactured from tough corrosion proof composite materials Heavy duty swivel reduces possible cracking in freezing conditions Multi position locking mechanism which, when released, provides a complete, positive retraction every time Hotwash reels for use in food preparation and food processing areas Garden hose complete with 2m side connection hose and inlet fitting Barrier reels are the ideal way to quickly set up personnel safety barriers LOW AIR AND WATER REELS 3/8 CONNECTION WORKING RC-AW mm / 5/16 20 mtrs 17 bar RC-AW mm / 3/8 20 mtrs 17 bar /2 CONNECTION RC-AW mm / 1/2 18 mtrs 17 bar GARDEN REELS 1/2 CONNECTION WORKING RC-G mm / 1/2 18 mtrs 10 bar BARRIER REELS 4030 HOTWASH REELS 1/2 CONNECTION WORKING RC-HW mm / 1/2 15 mtrs 17 bar WEBBING WTH WEBBING END FITTING RC-BAR mm 20 m Sewn loop WELDING AND CUTTING REELS Full flow swivel Viton seals Powder coated for durability High quality Independent dual swivel Heavy gauge steel WELDING / CUTTING REELS x WORKING 4030 RC-OA x 14 mm 15 mtrs 14 bar RC-OA x 16 mm 15 mtrs 14 bar Hozelock Hose Page Year guarantee Hard wearing

17 REELS REDASHE WARRANTY DETAILS All products supplied by Redashe are warranted from 1 to 5 years depending on manufacturer. Hose supplied by Redashe carries the warranty as listed by the manufacturer. A flexible connection must be used between the hose reel and supply. Use of a solid connection will void the swivel warranty. Redashe meets the requirements of BS EN ISO 9001: Updated Certification of the system was obtained by BSI Quality Assurance on 9th December 1991, Number RS ALL WARRANTIES COVER REEL ONLY AND EXCLUDE ANY SUPPLIED. RETRACTA SPRING REWIND REELS Tough, corrosion free polypropylene construction Supplied with fitted hose for specified application Choice of lockable mounting brackets Virtually maintenance free Lightweight - average just 10kg, easy to install Full automatic hose rewind for neat and tidy storage Low effort easy-to-use rewind tension REINFORCED PVC PVC RED REEL - COMPLETE WITH FOR COMPRESSED AIR 16 bar Working Pressure INLET SIZE OUTLET har100 3/8 66 ft 3/8 BSPF 1/4 BSPM har200 1/2 50 ft 3/8 BSPF 3/8 BSPM FOR BREATHING AIR 12 bar Working Pressure hbh100 3/8 50 ft 3/8 BSPF 3/8 BSPM GREEN REEL - COMPLETE WITH FOR GARDENS 7 bar Working Pressure INLET SIZE OUTLET hdr100 1/2 60 ft 3/8 BSPF 1/2 BSPM REINFORCED RUBBER BLUE REEL - COMPLETE WITH FOR COLD WASH 40 C 10 bar Working Pressure INLET SIZE OUTLET hcw100 1/2 50 ft 3/8 BSPF Bare Hose RED REEL - COMPLETE WITH FOR HOT WASH 90 C 10 bar Working Pressure INLET SIZE OUTLET hhw100 1/2 40 ft 3/8 BSPF 3/8 BSPM FOR PROPANE 21 bar Working Pressure hhw100p 3/8 50 ft 3/8 BSPF 3/8 BSPM FOR FO QUALITY WATER 95 C 21 bar Working Pressure hfq100 1/2 40 ft 3/8 BSPF 1/2 BSPM

18 COXREEL STAINLESS STEEL SPRING REWIND REELS Heavy duty 304 stainless steel construction Double supported solid 1 stainless steel axle Latching of hose at any length All working parts fully accessible for servicing Fully automatic hose rewind for neat and tidy storage Multi-position roller arm gives full range of mounting options Four direction non-snag roller guides reduce hose wear 1/4 stainless steel mounting base for maximum stability Slotted and drilled mounting holes for easy installation Externally mounted full-flow swivel for maximum product delivery REEL WITH FOR AIR / WATER 21 bar Maximum Pressure hshl450ssaw 1/2 7/8 50 ft 1/2 BSPF FOR DIESEL 21 bar Maximum Pressure hshl450ssd 1/2 7/8 50 ft 1/2 BSPF FOR FO INDUSTRY BARE REEL WITHOUT CAPACITY hshl450ss 1/2 7/8 50 ft 1/2 BSPF bar Maximum Pressure hshl450ssf 1/2 7/8 50 ft 1/2 BSPF COXREEL HEAVY DUTY SPRING REWIND REELS Heavy duty steel construction with durable blue powder finish Double supported solid 1 steel axle Multi-position roller arm gives full range of mounting options Four direction non-snag roller guides reduce hose wear 1/4 steel mounting base for maximum stability Slotted and drilled mounting holes for easy installation BARE REEL WITHOUT hplpl350 3/8 5/8 50 ft 3/8 BSPF hshl3100 3/8 5/8 100 ft 3/8 BSPF hshl450 1/2 7/8 50 ft 1/2 BSPF hshl4100 1/2 7/8 100 ft 1/2 BSPF hshl550 3/4 1.1/8 50 ft 3/4 BSPF hshl /16 35 ft 1 NPTF REEL WITH FOR AIR / WATER 21 bar Maximum Pressure hplpl350aw 3/8 5/8 50 ft 3/8 BSPF hshl3100aw 3/8 5/8 100 ft 3/8 BSPF hshl450aw 1/2 7/8 50 ft 1/2 BSPF hshl4100aw 1/2 7/8 100 ft 1/2 BSPF hshl550aw 3/4 1.1/8 50 ft 3/4 BSPF hshl635aw 1 1.7/16 35 ft 1 NPTF FOR DIESEL 21 bar Maximum Pressure hshl450d 1/2 7/8 50 ft 1/2 BSPF hshl4100d 1/2 7/8 100 ft 1/2 BSPF hshl550d 3/4 1.1/8 50 ft 3/4 BSPF hshl635d 1 1.7/16 35 ft 1 NPTF FOR FO INDUSTRY 21 bar Maximum Pressure hshl450f 1/2 7/8 50 ft 1/2 BSPF hshl4100f 1/2 7/8 100 ft 1/2 BSPF hshl550f 3/4 1.1/8 50 ft 3/4 BSPF Tubing & Hose Section 9 PVC Tubing & Hose Nylon Tubing & Recoils Polyurethane Tube & Recoils FOR WASH 21 bar Maximum Pressure hmpl350p 3/8 5/8 50 ft 3/8 BSPF hmpl3100p 3/8 5/8 100 ft 3/8 BSPF

19 COXREEL STEEL REEL SERIES Designed for industrial applications where longer lengths of hose are required Heavy gauge powder coated steel construction Ready for wall, floor or overhead installation Direct crank action combined with twin bearings requires minimum rewind effort Spring loaded locking pin prevents drum rotation when in use BARE REEL WITHOUT h /2 7/8 100 ft 1/2 BSPF h /2 7/8 200 ft 1/2 BSPF h /4 1.1/4 100 ft 3/4 BSPF REEL WITH FOR AIR / WATER 21 bar Maximum Pressure h aw 1/2 7/8 100 ft 1/2 BSPF h aw 1/2 7/8 200 ft 1/2 BSPF h aw 3/4 1.1/4 100 ft 3/4 BSPF COXREEL STEEL REELS SERIES Designed for industrial applications where longer lengths of hose are required Heavy gauge powder coated steel construction Ready for wall, floor or overhead installation Direct crank action combined with twin bearings requires minimum rewind effort Spring loaded locking pin prevents drum rotation when in use BARE REEL WITHOUT h / ft 1 NPTF REEL WITH FOR AIR / WATER 21 bar Maximum Pressure h aw 1 1.7/ ft 1 NPTF FOR DIESEL 21 bar Maximum Pressure h d 1 1.7/ ft 1 NPTF GARDEN REELS Lightweight and durable - just 12.5kg Constructed in high impact UV stabilised polypropylene Locking switch secures hose at any length Spring fully encased and lubricated Integral wall/ overhead pivoting bracket Non-snag rollers reduce hose wear Complete with water gun REEL WITH & GUN 60 C MAXIMUM TEMPERATURE MAXIMUM hc701-gar 1/2 65 ft 10 bar

20 REELWORKS SPRING REWIND REELS SERIES Lightweight and durable, just 12.5 kgs Constructed in high-impact UV stabilised polypropylene Suitable for compressed air and water Integral wall/overhead mounting bracket Fully automatic hose rewind for neat and tidy storage Complete with 15m of PVC hose REEL WITH 60 C MAXIMUM TEMPERATURE MAXIMUM hc /4 33 ft 20 bar hc /16 25 ft 12 bar hc /8 50 ft 20 bar hc /2 50 ft 21 bar REELWORKS SPRING REWIND CABLE REEL SERIES Compact, lightweight design Supplied with 15m of 3 core, 1.5mm cable Fitted inlet cable for connection to supply Integral wall mounting swivel bracket Latching of cable at any length Fully automatic spring rewind Low effort, easy to use rewind tension Virtually maintenance free REEL WITH CABLE 3 x 1.5 mm CORES CABLE VOLTAGE AMPS hc ft 240 V 3 / REELWORKS SPRING REWIND REEL SERIES Corrosion resistant powder coating Guide arm adjustable handling up to 9 positions Multi-position ratchet lock Ideal for food processing, washdown, chemical transfer and industrial solvent handling Four non-snag rollers reduce hose wear REEL WITH FOR LOW AIR / WATER Black Reel with Red Hose MAX. INLET / OUTLET hc808350l 3/8 50 ft 21 bar 3/ hc808450l 1/2 50 ft 21 bar 1/ FOR MEDIUM AIR / WATER Black Reel with Black Hose hc808350m 3/8 50 ft 155 bar 3/ Light Grey Reel with Black Hose hc808450m 1/2 50 ft 138 bar 3/ STAINLESS STEEL REEL WITH FOR LOW MAX. INLET / OUTLET hcss808450l 1/2 50 ft 21 bar 1/ MOUNTING BRACKET 180 ht15720 Heavy duty steel. For use with P & SH series hcst Grade stainless steel For use with P, SH,Truck & CSS808 series ht15725 Heavy duty steel. For size index 4 SH & size index 3 MP series REEL WITH FOR WELDING MAX. INLET / OUTLET hc808350w 3/8 50 ft 14 bar 3/ MOUNTING BRACKET PIVOTING hcp/b2 140 Steel wall bracket. For use with 809 series hcp/b3 340 Heavy duty steel base unit. For use with 809, 808 and 820 series hcp/b4 140 Steel wall bracket. For use with 808 series

21 REELWORKS SPRING REWIND REELS SERIES Heavy duty steel construction with corrosion resistant powder coating Multi-position ratchet lock Spring fully enclosed and lubricated 6.1/2 wide L-shaped base ensures stable support Guide arm adjustable for handling up to 9 positions Wall, ceiling, or floor mounted REEL WITH FOR LOW AIR / WATER MAX. INLET / OUTLET hc809325l 3/8 25 ft 21 bar 3/ REELWORKS SPRING REWIND REELS SERIES Non-snag roller guides reduce hose wear Latching of hose at any length Corrosion resistant powder coated finish, black as standard Full flow internal swivel assembly, ensures maximum flow Suitable for floor, wall, ceiling or vehicle mount Fully automatic hose rewind for neat and tidy storage REEL WITH FOR LOW AIR / WATER MAX. INLET / OUTLET hc l 1/2 100 ft 21 bar 1/ hc880550l 3/4 65 ft 21 bar 3/ hc880650l 1 50 ft 21 bar REELWORKS MANUAL REWIND REELS SERIES Constructed from tubular & formed steel for superior strength & durability Corrosion resistant powder coated finish, black as standard Full flow, brass swivel assembly, ensures maximum flow Suitable for floor, wall, workbench mounting, ideal for mobile applications Spring loaded lock pin prevents hose from de-reeling BARE REEL WITHOUT FOR LOW / MEDIUM AIR / WATER MAX. INLET / OUTLET hc h 3/8 100 ft 207 bar 3/ hc208465h 1/2 65 ft 207 bar 1/ REELWORKS MANUAL REWIND REELS SERIES Designed for applications where longer lengths of hose are required Constructed in heavy gauge powder coated steel Full flow swivel joint Open hose slot drum design, Oil-lite self-lubricating bearings Spring loaded lock pin prevents hose from de-reeling BARE REEL WITHOUT FOR LOW / MEDIUM AIR / WATER MAX. INLET / OUTLET hc h 3/8 350 ft 207 bar 3/ hc h 1/2 270 ft 207 bar 1/

22 KOREEL STAINLESS STEEL SPRING REWIND REELS - CTWA SERIES Constructed in heavy gauge 304 grade stainless steel Rolled and ribbed side discs for strength and rigidity Floor or wall mounting options Large 4-way roller guide to reduce hose wear Externally mounted spring canister Compact design BARE REEL WITHOUT hctwa1315 1/2 7/8 50 ft 1/ REEL WITH FOR AIR / WATER REELS 21 bar Maximum Pressure hctwa1315aw 1/2 7/8 50 ft 1/ FOR FO QUALITY 21 bar Maximum Pressure hctwa1315f 1/2 7/8 50 ft 1/ KOREEL STAINLESS STEEL MANUAL REWIND REELS - CRWM SERIES Constructed in heavy gauge 304 grade stainless steel Rolled and ribbed side discs for strength and rigidity Floor or wall mounting options Large 4-way roller guide to reduce hose wear Smooth and positive direct crank design BARE REEL WITHOUT hcrwm1920s 3/4 1.1/8 65 ft 3/ hcrwm2520s 1 1.1/2 65 ft REEL WITH FOR AIR / WATER 48 bar Maximum Pressure hcrwm1920as 3/4 1.1/8 65 ft 3/ hcrwm2520as 1 1.1/2 65 ft FOR DIESEL 48 bar Maximum Pressure hcrwm1920ds 3/4 1.1/8 65 ft 3/ hcrwm2520ds 1 1.1/2 65 ft FULLY ENCLOSED REELS Two part ribbed enclosure constructed in heavy gauge steel Wall or ceiling mount options Supplied with 3ft inlet connecting hose Full flow swivel assemblies for maximum product delivery Latching of hose at any length Designed for easy installation and service Supplied with 10mtr hose REEL WITH WITH R2 GREASE MAX. INLET / OUTLET hceor610 1/4 33 ft 276 bar 1/4 M/F x M WITH R1 OIL hceor910 3/8 33 ft 59 bar 3/8 M/F x M

23 HIGH VISIBILITY, HIGH CAPACITY REELS - CRHA SERIES Constructed in heavy gauge mild steel Highly visible yellow powder coated finish Rolled and ribbed side discs for strength and rigidity Large 4-way roller guide to reduce hose wear Externally mounted spring canister and swivel assembly Floor or wall mounting BARE REEL WITHOUT hcrha920 3/8 5/8 65 ft 3/ hcrha930 3/8 5/8 98 ft 3/ hcrha1320 1/2 7/8 65 ft 1/ hcrha1330 1/2 7/8 98 ft 1/ hcrha1920 3/4 1.1/8 65 ft 3/ hcrha1930 3/4 1.1/8 98 ft 3/ hcrha /2 65 ft REEL WITH FOR AIR/ WATER 186 bar Maximum Pressure hcrha920aw 3/8 5/8 65 ft 3/ hcrha930aw 3/8 5/8 98 ft 3/ bar Maximum Pressure hcrha1320aw 1/2 7/8 65 ft 1/ hcrha1330aw 1/2 7/8 98 ft 1/ bar Maximum Pressure hcrha1920aw 3/4 1.1/8 65 ft 3/ hcrha1930aw 3/4 1.1/8 98 ft 3/ bar Maximum Pressure hcrha2520aw 1 1.1/2 65 ft FOR DIESEL 172 bar Maximum Pressure hcrha1320d 1/2 7/8 65 ft 1/ hcrha1330d 1/2 7/8 98 ft 1/ bar Maximum Pressure hcrha1920d 3/4 1.1/8 65 ft 3/ hcrha1930d 3/4 1.1/8 98 ft 3/ bar Maximum Pressure hcrha2520d 1 1.1/2 65 ft WHEN ORDERING PLEASE SPECIFY REQUIRED WORKING OF HIGH VISIBILITY, HIGH CAPACITY REELS - CRWM SERIES Constructed in heavy gauge mild steel Highly visible yellow powder coated finish Rolled and ribbed side discs for strength and rigidity Large 4-way roller guide to reduce hose wear Smooth and positive direct crank design Floor or wall mounting BARE REEL WITHOUT hcrwm1320 1/2 7/8 65 ft 1/ hcrwm1340 1/2 7/8 131 ft 1/ hcrwm1940 3/4 1.1/8 131 ft 3/ hcrwm /2 100 ft REEL WITH FOR AIR/ WATER 48 bar Maximum Pressure hcrwm1320aw 1/2 7/8 65 ft 1/ hcrwm1340aw 1/2 7/8 131 ft 1/ hcrwm1920aw 3/4 1.1/8 65 ft 3/ hcrwm1940aw 3/4 1.1/8 131 ft 3/ hcrwm2520aw 1 1.1/2 65 ft hcrwm2530aw 1 1.1/2 131 ft FOR DIESEL 48 bar Maximum Pressure hcrwm1320d 1/2 7/8 65 ft 1/ hcrwm1340d 1/2 7/8 131 ft 1/ hcrwm1920d 3/4 1.1/8 65 ft 3/ hcrwm1940d 3/4 1.1/8 131 ft 3/ hcrwm2520d 1 1.1/2 65 ft

24 PATHFINDER SERIES REELS R A Brand New Concept in Hose Reel Technology OF THE CONCEPT Eliminates the use of a fixed guide arm in a wall/ceiling mount position. Easy to install with no need for post installation adjustments. Unique, automatic, 90 vertical rotational span. Balanced clock spring produces enough torque to displace the weight of the guide arm. Roller guide arm moves vertically up & down in a smooth, effortless and fully automatic manner. The roller guide and arm/s will always be directly facing the user. Giving total control on payout and retrieval. Allows the units to be mounted at an increased height Removes the possibility of harm to the operator, passing personnel or damage to machinery compared to low-level units. Roller guide arm returns to its rest position after use, this sets the reel ready for the next operator. STANDARD FEATURES Constructed in heavy gauge powder coated steel. Finished in a durable, white powder coated gloss finish. Latching of hose at any length. Fully automatic hose rewind for neat and tidy storage. Extended roller guide aperture to ease hose layering. Externally mounted swivel assemblies. Viton seals and nylon backup rings as standard. Low, Medium and High pressure applications. Double supported 1, solid steel axle. Pathfinder Self-adjusting roller guide arm. All working parts fully accessible for servicing. Floor, wall or ceiling mounting options. Suitable for Air, Water, Oil, Diesel and Grease delivery 2-year manufacturer s warranty REEL WITHOUT FOR AIR / WATER / OIL / DIESEL / GREASE LOW (INCLUDES PIVOTING WALL BRACKET) hpfs-915l 3/8 15 m 20 Bar hpfs-920l 3/8 20 m 20 Bar hpfs-1315l 1/2 15 m 20 Bar hpfs-1320l 1/2 20 m 20 Bar MEDIUM (INCLUDES PIVOTING WALL BRACKET) hpfs-915m 3/8 15 m 155 Bar hpfs-920m 3/8 20 m 155 Bar hpfs-1315m 1/2 15 m 155 Bar hpfs-1320m 1/2 20 m 155 Bar HIGH (INCLUDES PIVOTING WALL BRACKET) hpfs-615h 1/4 15 m 344 Bar hpfs-915h 3/8 15 m 275 Bar

25 REELS SERIES Fully encased medium sized hose reel Spring tension easily adjustable from the outside Fast and easy to service Simple hose replacement without needing to dismantle the reel Complete with rubber hose Ideal for vehicle repair and maintenance workshops SPECIFICATIONS Hose Distribution hose fitting Distribution hose length Connection hose length Temperature Cover in NBR/ PVC and in tube in NBR. Synthetic textile braid Male BSP Chrome plated 10m 1m -30 C to +100 C REEL WITH FOR AIR/ WATER 4020 MAX. NE /2 15 bar SERIES 884 REELS Heavy duty hose reel for long and heavy hoses Ball bearings in drum and swivel Fully protected inner mechanisms Smooth hose operation Adjustable outlet arm minimises friction Complete with rubber hose Ideal for demanding applications SPECIFICATIONS Reel Hose Distribution hose fitting Distribution hose length Connection hose length Temperature Epoxy coated die cast aluminium Cover in NBR/ PVC and in tube in NBR. Synthetic textile braid Male BSP Chrome plated 15m 1m -30 C to +100 C REEL WITH FOR AIR/ WATER 4020 MAX. NE /4 15 bar SERIES 888 / 889 REELS Medium sized hose reel for safe and maintenance free operation Outlet roller position can be adjusted through 120 for optimal pull-out angle Spring tension is easily adjusted Latch function is easily disengaged Complete with rubber hose SPECIFICATIONS 888 SERIES Hose Cover in NBR/ PVC and in tube in NBR. Synthetic textile braid Distribution hose fitting Male BSP, chrome plated Distribution hose length 10m Connection hose length 1m Temperature -30 C to +100 C SPECIFICATIONS 889 SERIES Hose Cover in NBR/ PVC and inner tube in food grade quality NBR. Synthetic textile braid Distribution hose fitting Male BSP 60 cone, chrome plated Distribution hose length 13m + 2m Connection hose length 1m Temperature -30 C to +100 C Inlet hose fitting Female BSP 60 cone, chrome plated REEL WITH FOR AIR / WATER GRADE 4020 MAX. NE /2 20 bar REEL WITH FOR WATER / FO GRADE 4020 MAX. NE /2 20 bar

26 REELS SERIES Designed specifically for the food industry Meets international hygienic requirements Easy to clean round edges and easy to dismantle hose outlet Externally mounted swivel and minimum number of material joints Up to 25m hose capacity Hose not included SPECIFICATIONS Reel Stainless steel Max pressure 15 bar REEL WITH FOR FO INDUSTRY 4020 NE mm (1 ) 10 mtrs SERIES C20 CABLE REEL Robust design in high impact composite materials Snap-on, pivoting wall bracket for easy mounting Safety latch for safe and easy service Degree of protection code, IP 55 Complete with rubber cable and UK socket Suitable for electrical tools and hand lamps SPECIFICATIONS Voltage 230 Distribution cable length 12m Distribution cable type H07RN-F Connection cable length 1m Max Power 2300W REEL WITH CABLE 4020 CABLE NE mtrs SERIES 793 CABLE REEL Heavy duty cable reel Supplied with thermal overload protector Accommodates power cables up to 25m Components made of composite materials and galvanised steel Degree of protection code, IP 55 Tested and approved according to IEC Complete with rubber power cable SPECIFICATIONS Voltage 230 Amperage 16 Phase 1 Distribution cable length 18m Distribution cable type H07RN-F Connection cable length 1m Max Power W REEL WITH CABLE 4020 CABLE NE mtrs

27 REELS STORAGE WALL MOUNTED HANGER INCLUDES 1 x Freestanding hose reel, 25m of 12.5mm hose 1 x nozzle, 2 x hose connectors, 1 x waterstop, 1 x 3/4 / 1/2 tap connector HZ2360 For 30m of 12.5mm hose M REEL WITH 25M FREESTANDING HZ2412 Freestanding hose reel STORAGE PLUS INCLUDES Wheeled hose reel, 30m of 12.5mm Maxi Plus hose, 1 x nozzle, 2 x hose connectors, 1 x waterstop, 1 x 1 /3/4 /1/2 tap connector INCLUDES Enclosed freestanding or wall mounted hose reel with hose layering, 25m of 12.5mm Maxi Plus hose, 1 x nozzle, 2 x hose connectors, 1 x waterstop, 1 x 3/4 / 1/2 tap connector, wall fixings 60M ASSEMBLED PLASTIC CART WITH 30M HZ2434 Wheeled hose reel COMPACT MANUAL REEL WITH 25M HZ2415 Enclosed hose reel STORAGE PRO INCLUDES Wheeled hose reel, 2 x PLUS hose end connectors INCLUDES Wheeled hose reel, 30m of 12.5mm Maxi Plus hose, 1 x nozzle, 2 x PLUS hose connectors, 1 x PLUS waterstop, 1 x 1 / 3/4 / 1/2 tap connector 60M ASSEMBLED METAL CART WITHOUT HZ2437 Wheeled hose reel M ASSEMBLED METAL CART WITH 30M HZ Wheeled hose reel INCLUDES Wall mounted hose reel with geared easy rewind and automatic hose layering, 40m of 12.5mm Maxi Pro hose, and 2m feeder hose. 1 x nozzle, 2 x hose connectors, 1 x waterstop, 1 x 3/4 / 1/2 tap connector. With wall fixings, and corner hose guide INCLUDES Wall mounted hose reel with automatic rewind. 20m of 12.5mm Maxi Pro hose, and 2m feeder hose. 1 x nozzle, 1 x hose connectors, 1 x waterstop, 1 x 1 / 3/4 / 1/2 tap connector. With wall fixings WALL MOUNTED FAST REEL WITH 40M INCLUDES HZ2496 Wall mounted hose reel, geared easy rewind AUTO REEL WITH 20M INCLUDES HZ2490 Wall mounted hose reel, automatic rewind

28 & CONNECTORS - WATERING RANGE SUITABILITY General purpose garden use SPECIFICATIONS Construction 10 Year guarantee Hard wearing Four layer design, a smooth PVC inner layer to allow maximum flow, a thick PVC layer to add strength, a braided polyester layer to stop expansion of the hose and a tough PVC outer layer. MAX PLUS STARTER SET CONTENTS 1 x 30m Maxi Plus general purpose braided hose 1 x 3/4 and 1/2 Tap connector to attached to an outside tap 1 x Hose end connector to attach the hose to the tap 1 x Aquastop connector to connect the end of the hose to the nozzle 1 x Spray nozzle MAXI PLUS - YELLOW WITH GREY STRIPE 30 metre coils per coil HOZ /2 3/ MAXI PLUS STARTER SET 12.5 mm DIA HOZ Hose and fitting starter set END CONNECTORS NOZZLE HZ2292 Adjustable from jet to fine spray 5.18 MULTI SPRAY GUN LOCKABLE ON / OFF TRIGGER HZ Spray patterns: jet, cone, fast fill, flat spray, and fine rose Steiner Hose & Cable Reels Page Electric reels Air hose reels Steel casing air hose reels

29 FITTINGS FITTINGS DUAL TAP CONNECTOR 3/4 BSP / 1/2 BSP HZ2155 Connects two hoses to one outdoor tap OUTDOOR TAP CONNECTOR 3/4 BSP / 1/2 BSP HZ2175 For outdoor threaded taps 3.92 OUTDOOR TAP CONNECTOR 1 BSP HZ2158 For outdoor threaded taps 4.20 DOUBLE MALE CONNECTOR HZ2291 Allows two hoses to be joined using 2 hose connectors 4.06 Y CONNECTOR HZ2293 Allows three hoses to be joined using 3 hose connectors 3.50 REPAIR CONNECTOR 12.5mm HZ2100 For repairing damaged hose 4.06 FITTINGS - PLUS END CONNECTOR 12.5mm & 15mm HZ2050 Soft touch fitting. Flexible tail prevents kinking 3.95 AQUASTOP CONNECTOR 12.5mm & 15mm HZ2055 Valve shuts off water when accessory is disconnected 6.30 METAL FITTINGS - PRO OUTDOOR TAP CONNECTOR 3/4 BSP / 1/2 BSP HZ2041 For outdoor threaded taps 7.17 OUTDOOR TAP CONNECTOR 1 BSP HZ2042 For outdoor threaded taps 7.56 DOUBLE MALE CONNECTOR HZ2044 Allows two hoses to be joined 7.17 REPAIR CONNECTOR 12.5mm HZ2043 For repairing damaged hose 7.42 END CONNECTOR 12.5mm & 15mm HZ2030 Soft touch fitting. Flexible tail prevents kinking 8.40 AQUASTOP CONNECTOR 12.5mm & 15mm HZ2035 Valve shuts off water when accessory is disconnected

30 SPRAYERS SPRAYERS PLUS DESCRIPTION Small, heavy duty pressure sprayer Lockable on/off flow control for continuous spraying Nozzle adjustment from fine jet to mist 3 years guarantee DESCRIPTION Lockable on/off flow control for continuous spraying Wide ergonomic pump handle for easy filling and emptying Covers up to 210m 2 3 years guarantee 1.25 LITRE SPRAYER CAPACITY HZ4122P 1.25 litres LITRE SPRAYER CAPACITY HZ litres DESCRIPTION Specifically designed for spraying larger areas Contoured container, shaped to comfortably fit the operators back Covers up to 480m 2 3 years guarantee 16 LITRE SPRAYER CAPACITY HZ litres SPRAYERS PRO DESCRIPTION Small, heavy duty pressure sprayer for the application of aggressive chemicals Equipped with Viton fluoroelastomer seals 2 years guarantee DESCRIPTION Lockable on/off flow control for continuous spraying Equipped with Viton fluoroelastomer seals Covers up to 210m 2 2 years guarantee VITON 1.25 LITRE SPRAYER CAPACITY HZ litres VITON 7 LITRE SPRAYER CAPACITY HZ litres