FLAIL CUTTERS. Accessories at extra charge. Side shift with hydraulic cylinder complete with pipes 538. Flails Flails TI 100.

Transcription

1 Prices and Specifications may be subject to change without notice. Prices do not include shipping or setup. FLAIL CUTTERS Unidirectional motor (with drainage) FLAIL HEADS FOR MINI-LOADERS Parallel linkage for better floating on uneven grounds Linkage SAEJ2513 with self levelling device HP 14,5-25 Gal/min Ø max 2 Mod. inches inches pounds Gal min max PSI n. n. TSKID ,0 21, TSKID ,0 25, Overlap rotor Machines Model Suggested Retail - $ TSKID TSKID Mechanical side shift Anti-shock + anticavitation valve Steel adjusting valve complete with pipes Hydraulic pipes and connections protected by spiral Belts transmission Adjustable skids with replaceable wear proof plates Rear adjustable roller Ø 6 1/2 Counterblade Rubber and abrasion resistant guard Accessories at extra charge Model Suggested Retail - $ Side shift with hydraulic cylinder complete with pipes 538 Flails Flails TI 100 Hammer for wood and shrubs Multiuse flails for grass, bushes, shrubs, sticks, wood Ø max 2 Ø max 1 1/2 Cod Cod TSKID 1600 n 16 standard TSKID 1800 n 18 standard TSKID 2000 n 20 standard TSKID 1600 n 48 standard TSKID 1800 n 54 strandard TSKID 2000 n 60 standard

2 HYDRAULIC FLAIL HEADS TME TID TI T250A - T320A Serie T380D - T430D - T460 Serie TM - TP Serie Model Cutting width Weight Suitable for In. lbs models TME T250A TME T320A TID T380D - T430D - T460 TI T470P TI TM - TP Flail head Model Type of flail N Flail Suggested Retail - $ TME60 Articulated Y blades TME80 Articulated Y blades TID100 Multi-use and straight blades Articulated Y blades Bootie blades TI120 Multiuse Y blades T hammer Front and rear guard Adjustable rear roller Main housing with inner lining Reversible hydraulic motor in alluminium (TME - TID) Reversible hydraulic motor in cast iron (TI) Skids Replaceable wear skids (TI) Flails TME60 - TME80 Specific rotor Articulated Y blades for: grass, shrubs, Ø max 1 Cod Flails TID100 Multi-use and straight blades for: grass, shrubs, bushes, sticks, wood Ø max 1 1/4 Articulated Y blades for: grass, shrubs, Ø max 3/4 Multiuse blades and straight for: grass, bushes, shrubs, sticks, woods Ø max 1 3/4 Cod Cod Cod Cod Flails TI120 Interchangeable on same rotor Multiuse Y blades for grass, shrubs, bushes, sticks, wood Ø max 1 1/4 T hammer blades for woods Ø max 1 3/4 Cod Cod Prices and Specifications may be subject to change without notice. Prices do not include shipping or setup.

3 PROFESSIONAL FLAIL HEADS Front guard TN120 TXV Serie Adjustable rear roller Double skin Reversible hydraulic motor Model Cutting width Weight Suitable for In. lbs models TN TXV Energy Skids Flail head Model Type of flail N Flail Suggested Retail - $ TN120 Multiuse blades TN120 T hammer Flails TN120 Interchangeable on same rotor Multiuse and straight flails for grass, shrubs, bushes, sticks, wood Ø max 1 3/4 T hammer blades for woods Ø max 2 36 Cod Cod Cod Prices and Specifications may be subject to change without notice. Prices do not include shipping or setup.

4 MKD RELIABILITY PERFORMANCE TECHNICAL Double shaft gearbox Hydraulic sideshift (the tractor must be equipped with double acting oil outlet) MKD 2300: Pto 1000/540 RpM 6 row spiral rotor with balancing end shields. Rotor bearings internally fitted Steel plate for cutting adjustment Rear adjustable roller Ø 6 1/2 (4 positions). Screwed bearing housing Adjustable axial floating belt tensioner (ensures durabilitylimiting the power dissipation inheat Pto shaft with free wheel (depending on the use Front, Rear or Revers of the flail mower). hydraulic side shift Hydraulic hoses with quickcouplings Tubular and wear resistant side skids (they facilitiate the side sliding of the mower)

5 Prices and Specifications may be subject to change without notice. Prices do not include shipping or setup. FLAIL CUTTERS FRONT AND REAR MOWERS FOR PROFESSIONAL GREEN MAINTENANCE AND AGRICULTURE Model Cutting width Total width Weight Three point linkage Side shift Belts Tractor Pto Blade tip speed ft. ft. lbs Cat. ft. HP min/max Rpm ft/sec MKD II - III / * 177 MKD II - III / MKD II - III / (*) On request: Pto 540 Rpm, rotor 1900 Rpm, blade tip speed 50 m/sec. Machines Model Flails Suggested Retail - $ MKD 2300 A-B 72 Mutiuse Flails 24 Forged Hammers MKD 2500 A-B 78 Mutiuse Flails - 26 Forged Hammers MKD 2800 A-B 84 Mutiuse Flails - 28 Forged Hammers Accessories at extra charge Model Suggested Retail - $ Second PTO shaf for Rear PTO 586 (cod ) mod. MKD2300 e MKD2500 Second PTO shaft for Front PTO (cod ) mod. MKD2800 NB: versions Only front (standard fitting Pto shaft included in machine price) Only rear (to mention at the time of order - Pto shaft included in machine price) Front and Rear (to mention at the time of order extra charge for second Pto shaft will apply) Working positions MKD 2300 MKD 2500 MKD 2800 Flails Multiuse flails for grass, bushes, shrubs, sticks, sticks Ø 1 3/4 max. Forged hammerblades for: woods, twigs, grass Ø 2 max. A B Cod Cod For packaging reasons the mowers headstock on ME - MT - MKD shall be delivered unbolted. Reassembling will have to be at dealers charge. Attachment to the tractor 3 point hitch, including PTO shaft fitting, also at dealer s charge. For Set-up times please check page 39 Revolving upper 3 point linkage for front and rear mounting Gearbox prearranged for rear (clockwise rotaion) and front (anticlockwise rotation) mounting Side shift linkage with hydraulic cylinder Circular section of the arms H.T.R. Inner lining (High (for Torsion a better Resistance) protection of the entire mowing body) tightener pulley with axial floating, guarantees durability of the transmission by limiting the power dissipation in heat Adjustable rear roller (4 positions) Ø 6 1/2 with bolted on bearing housing ends Rotor internal bearing Spiral rotor with Floating balancing system shields tubular slides (facilitate the translation of the shredder) with anti-wear pads wear bar for cutting adjustement hydraulic hoses with quick couplings Front guards with metal flaps Rear abrasion resistant rubbercloth guard Mechanical breakaway PTO (arm shaft protection with free wheel in case of obstacles) Warning: Drop forged parts Suitable for tractors equipped with one double acting valve Oil cooler with thermostat 7 Deve

6 MOWERS FOR GRASS AND TWIGS Central and offset linkage Adjustable rear roller Adjustable belt-tensioner Model Cutting width Weight Three point linkage Tractor Pto Rotor Overall width Blade tip speed ft. lbs Cat. HP min/max Rpm Rpm ft. ft/sec MT I 30/ MT I 35/ MT I - II 45/ MT I - II 50/ Inner lining Rotor bearing internally fitted Pto shaft with overrun clutch Warning: MTR version for tractors with reversible drive available on demand. Machines Model Flails Suggested Retail - $ MT140 A 32 Y blades B 16 hammer blades MT160 A 40 Y blades B 20 hammer blades MT180 A 48 Y blades B 24 hammer blades MT200 A 48 Y blades B 24 hammer blades Working positions Side skids MT 140 MT 160 MT 180 MT Flails Y Blades for: grass, twigs Ø max 1 1/4 A Hammer blades for: grass, twigs Ø max 1 3/4 Cod Cod For packaging reason the mowers headstock on ME-MT-MKD as well as the side skid kit on MT shall be delivered unbolted. Reassembling will have to be at dealers charge. Attachment to the tractor 3 point hitch, including PTO shaft fitting, also at dealer s charge. B Prices and Specifications may be subject to change without notice. Prices do not include shipping or setup.