Vineyard Flail Mowers

Transcription

1 REPLACEMENT PARTS CATALOG Vineyard Flail Mowers Series TSE

2 B&M Parts Catalog Vineyard Flail Mower Series TSE MG Equipment Company specializes in unique tractor implements designed specifically for vineyards and orchards. This catalog is designed to detail all the parts and components for B&M Vineyard Flail Mowers. When placing an order for replacement parts, be certain to state the model# and serial# of your individual unit to ensure that the correct part is shipped to fit your specific mower. To ensure a long life of reliable and trouble-free service for your implements, use only genuine B&M replacement parts. It is our goal to meet or exceed the expectations of our customers and to offer unsurpassed service and parts support. We partner with each of our manufacturers to provide the best possible after-sales-support. We thank you for your valued business. We remain at your complete disposal for any information you require regarding any of our products. For Replacement Parts Sales and Information contact: MG Equipment Co. PO Box Vineburg, CA 9 mgequipment@gmail.com Tel: (0) 99-0 Fax: (0) 99-0 Mobile: (0) -0

3 HAMMERS / KNIVES / DRIVE BELTS Series TSE Flail Mower BM-A00 Bolt 0 x 90 mm PF BM-A00 Nut 0 mm PF BM-A000 Center Straight Knife BM-A009 TSE series Hammer BM-A000 TSEV + TSB series Hammer BM-A000 Y-Knife (Left/Right) (for TSEV / TSE / TSB series mowers) TSEV / TSB Series Mowers QUANTITY PER MODEL TSEV-90 TSEV-90 TSB-0 TSB-0 TSB-0 TSB-00 TSB- BM-A000 Flail Hammer RM pcs pcs pcs pcs pcs 0 pcs pcs BM-A000 BM-A000 Y-Knife (Left/Right) Center Straight Knife pcs pcs pcs pcs pcs pcs pcs pcs pcs pcs 0 pcs 0 pcs pcs pcs BM-0A0 Drive Belt BX-0 pcs pcs pcs pcs pcs pcs pcs TSE Series Mowers QUANTITY PER MODEL TSE-0 TSE-0 TSE-0 TSE-00 BM-A009 Flail Hammer RM pcs pcs pcs 0 pcs BM-A000 BM-A000 Y-Knife (Left/Right) Center Straight Knife pcs pcs pcs pcs pcs pcs 0 pcs 0 pcs BM-0A0 Drive Belt BX-0 pcs pcs pcs pcs Page Rev.

4 Series TSE Flail Mower MAIN BODY / FRAME Item# BM-0C0.0TSE BM-0C0.0TSE BM-0C0.0TSE BM-0C0.00TSE BM-0C00.0TSE BM-0C00.0TSE BM-0C00.0TSE BM-0C00.00TSE BM-0C00.0 BM-0C00.0 BM-0C00.0 BM-0C00.00 Main body / frame - TSE-0 Main body / frame - TSE-0 Main body / frame - TSE-0 Main body / frame - TSE-00 Rear roller - TSE-0 Rear roller - TSE-0 Rear roller - TSE-0 Rear roller - TSE-00 Roller scraping bar - TSE-0 Roller scraping bar - TSE-0 Roller scraping bar - TSE-0 Roller scraping bar - TSE-00 Page Rev.

5 Series TSE Flail Mower MAIN BODY / FRAME Item# Item# 9 0 BM-0H0.TSE BM-0A0.0TSE BM-0A0.0TSE BM-0A0.0TSE BM-0A0.00TSE BM-0A00 BM-0A00() BM-0A0 BM-0A0() BM-0A0 BM-0C09TSE BM-0A0 BM-0A0 Gearbox (B&P S00) - TSE mower Lateral transmission shaft - Mod. 0TSB Lateral transmission shaft - Mod. 0TSB Lateral transmission shaft - Mod. 0TSB Lateral transmission shaft - Mod. 00TSB Pulley - 90 mm - belts Pulley - 90 mm - belts Pulley - 0 mm - belts Pulley - 0 mm - belts Drive belt - BX-0 Protective cover for drivebelts - series TSE Pulley blocking collar (0 x mm) Pulley blocking collar ( x mm) - BM-0A0 BM-0A0 BM-0C BM-0C BM-0C BM-0C BM-0C00 BM-0C0TSE BM-0C0TSE BM-0A0 BM-0H0 Bolt - M x 0 mm PG Nut - M PG basso Support rod for entrance flaps + lock nut - Mod. 0 Support rod for entrance flaps + lock nut - Mod. 0 Support rod for entrance flaps + lock nut - Mod. 0 Support rod for entrance flaps + lock nut - Mod. 00 Steel entrance flaps Roller support assembly TSE- LEFT side** Roller support assembly - TSE RIGHT side** Bearing + support collar - UC0 Plastic shield/guard for PTO stem - ** NOTE: Left and Right indications on the part description refers to viewing the implement from the rear when attached to the tractor. Page Rev.

6 Series TSE Flail Mower -POINT HARNESS A Item# Item# A (call) BM-0C0 BM-0C0A BM-0C09 BM-0C0 -point harness assembly - TSE Strap for -point harness assembly Bolt - M0 x 0 mm + flat washer + locknut Support hook for PTO driveline -point attachment plate (flat) BM-0C0 BM-0A0 BM-0A00 BM-0A0 -point attachment plate (angled) Linkage pin - - mm R-clip - x mm Linkage pin - 9- mm Page Rev.

7 ROTOR Series TSE Flail Mower A0000 A000 A0009 A0 A00 C0TSE C0000TSE ROTOR C000TSE C0TSE A000 A00 A0 A0009 A000 A00 C000 BM-A0000 BM-A0009 BM-A000 BM-A000 BM-A00 BM-A0 BM-C0000TSE BM-C000TSE Hammer/Knife mounting supports (set of pcs) Shaft adapter sleeve - H (kit) Snap ring - Int 00 Hex set screws - M0 x 0 mm Oil seal Bearing - CKW Rotor support housing TSE - RIGHT side** Rotor support housing TSE - LEFT side** -0 BM-C000 Round access plate - threaded - Diam = cm BM-C0TSE Rotor support housing (complete assembly) TSE- LEFT side** BM-C0TSE Rotor support housing (complete assembly) TSE - RIGHT side** Rotor - Mod. TSE-0 Rotor - Mod. TSE-0 Rotor Rotor - Mod. TSE-0 Rotor - Mod. TSE-00 ** NOTE: Left and Right indications on the part description refers to viewing the implement from the rear when attached to the tractor. Page Rev.

8 Series TSE Flail Mower SKIDS Item# BM-0C00TSE BM-0C009TSE (call) BM-Z00 BM-0A00 (call) Skid plate - TSE - RIGHT side** Skid plate - TSE - LEFT side** Bolt - M x mm PG + nut (self-locking) - basso Allen bolt - pan head (size = tba) Zerk fitting - mm PG (straight) Nut (self-locking) - M0 + flat washer ** NOTE: Left and Right indications on the part description refers to viewing the implement from the rear when attached to the tractor. Page Rev.

9 ROLLER / RAKE TEETH Series TSE Flail Mower (inside) (inside) Item# BM-0C0TSE BM-0C0TSE BM-0A0 BM-0A009 (call) (call) BM-0C0TSE Roller support assembly TSE - RIGHT side** Roller support assembly TSE - LEFT side** Bearing + collar - UC0 Zerk fitting - mm PG (straight) Bolt - M x 0 mm PG + nut (self-locking) Bolt - M x mm PG + nut (self-locking) Rake teeth - series TSE - ** NOTE: Left and Right indications on the part description refers to viewing the implement from the rear when attached to the tractor. Page Rev.

10 PULLEYS / BELTS / PTO DRIVELINE Series TSE Flail Mower 9 Item# 9 BM-0A0 BM-0A0() BM-0A00 BM-0A00 BM-0A0 BM-0A0 BM-A00K BM-0A0 BM-90TSB BM-90TSB(PC) BM-9000 Pulley - 0 mm - belts Pulley - 0 mm - belts Pulley - 90 mm - belts Pulley - 90 mm - belts Pulley blocking collar - 0 x mm Pulley blocking collar - x mm Zerk fitting + tubing kit for rotor Drive belt - BX-0 PTO Driveline - BP-0 - L=90 cm Protective cover for PTO driveline (BP-0-90 cm) Tether chains for PTO driveline shield - Page Rev.

11 Series TSE Flail Mower GEARBOX Gearbox - S00 BM BM BM BM BM BM BM BM BM BM Gearbox housing - 0 G Shaft - PTO side with spline groove -/ Spacing collar for free spinning shaft Gearbox housing coverplate 0 Support collar RL L=9.0 x 00 Bolt - M x 0 x. -. zinc Lock washer - D.. x. x. zinc Snap ring - Ext. x.0 Snap ring - Int. x.00 Snap ring - Int. x.0 BM BM-0.E0.00 BM-.0.0 BM-.0.0 BM-.0.0 BM-.0.0 BM BM BM BM-.0.0 Snap ring - Ext. x. SP Spacing washer - E. 0 Spring for free-spinning shaft - FILO 0. Bearing xx Bearing - 00X - xx Oil seal Round coverplate - x 0 Oil plug (vented) - / Oil plug - / + aluminum washer Gears (set of ) - conical - R=.0 (0) Page 9 Rev.

12 For Questions or Technical Assistance Contact: MG Equipment Co. PO Box Vineburg, CA 9 Tel: (0) 99-0 Mobile: (0) -0 mgequipment@gmail.com REV-