FINISHED WALL. OPTIONAL TO FINISHED FLOOR USUALLY BETWEEN 1651 AND 1981mm (65 AND 78) OPTION 457 mm (18") 25mm (1) MIN.

Transcription

1 PRESSURE BALANCE BATH/SHOWER FAUCET Volume and Temperature Control Valve Available Trim Kits Colony Soft Colony Soft FloWise Moments Reliant 3 Ceramix Princeton R120 Valve Body Shown Jasmine Copeland Green Tea Studio GENERAL DESCRIPTION: Tendence Cast brass body, washerless 47mm ceramic disc valve cartridge with volume control, temperature control, and hot limit safety stop. Pressure balancing cartridge maintains constant output temperature in response to changes in relative hot and cold supply pressure. One-half inch inlets and outlets (choice of direct sweat, threaded or PEX). Available with screwdriver stops. Rough-in plaster guard designed for use as thin-wall mounting adaptor. Valve body will accept a variety of decorative Bath/Shower trim kits. PRODUCT FEATURES: Cast Brass Valve Body: Durable - Quality that will last a lifetime. Ideal material for prolonged contact with water. Ceramic Disc Valve Cartridge: Assures a lifetime of drip-free performance. Allows easy control over both water temperature and volume. Pressure Balancing Valve Cartridge: Maintains constant output temperature in response to changes in relative hot and cold supply pressure. Diaphragm system engineered to eliminate cross flow. Avoids failure due to mineral deposits - ideal for use in hard water. Adjustable Hot Limit Safety Stop: Limits the amount of hot water allowed to mix with cold. Reduces the risk of accidental scalding. Exclusive Plaster Guard: Plaster guard is designed to protect valve during installation and serve as a mounting plate for thin-wall installations. Two piece design allows valve to be tested prior to trim installation. Wide Rough-in Range: From 1-5/8" to 3-1/ (41 to 83mm). OPTIONAL TO FINISHED FLOOR USUALLY BETWEEN 1651 AND 1981mm (65 AND 78) MODEL NUMBER: R120 Pressure Balance Rough Valve Body only Direct sweat inlets/outlets. LESS trim. R120SS Pressure Balance Rough Valve Body only Direct sweat inlets/outlets. Screwdriver stops. LESS trim. R125 Pressure Balance Rough Valve Body only Female thread inlets/outlets. LESS trim. R125SS Pressure Balance Rough Valve Body only Female thread inlets/outlets. Screwdriver stops. LESS trim. R127 Pressure Balance Rough Valve Body only PEX inlets/direct sweat outlets. LESS trim. R127SS Pressure Balance Rough Valve Body only PEX inlets/direct sweat outlets. Screwdriver stops. LESS trim. See reverse for available trim kits. OPTION 457 mm () 25mm (1) MIN. 1/2" 102 mm () 1/2" PEX (ASTM F1807-2) 109mm (4-1/) PEX (R127) 52 mm 41 TO 83mm (1-5/8 TO 3-1/4) 104 mm (4-1/1) VALVE BODY OPTIONS (STOPS) (R120SS) SHR (4-1/1) (R120) 149 mm (5-7/8") TUB PORT THREADED (R125) 149 mm (5-7/8") 51.5 mm 51 mm (2") (4-1/1) THREADED (STOPS) (R125SS) 1/2" PEX (ASTM F1807-2) 165mm (6-1/2") PEX (STOPS) (R127SS) (4-1/1) 52 mm 104 mm (4-1/1) FBS PRESSURE BALANCE BATH/SHOWER rev. 12/09

2 PRESSURE BALANCE BATH/SHOWER FAUCET Volume and Temperature Control Valve CODES AND STANDARDS These products meet or exceed the following codes and standards: ANSI A ASSE 1016 ASME A M IAPMO (cupc) Valve + Trim: Trim Kit & Valve Body Packaged Separately To order: Specify valve body and trim kit desired Example: R120 - Valve Body T Princeton Bath/Shower Trim Kit GALLONS PER MINUTE FLOW RATE* Spout LITRES PER MINUTE KPa PSI INLET PRESSURE *Flow rates shown are for mixed hot and cold. Showerhead with 2.15gpm/9.5L.min. flow restrictor. VALVES R120 R120SS w/ Screwdriver Stops R125 Female Thread R125SS Female Thread w/ Screwdriver Stops R127 PEX Inlets/ Outlets R127SS PEX Inlets/ Outlets w/ Screwdriver Stops Colony "Soft" Colony "Soft" FloWise Reliant 3 Reliant 3 w/mod Plate Ceramix Jasmine Tendence TRIM KITS B/S T T T T T T T Shower T T T T T T T Valve T T T T T T Copeland Moments Green Tea Princeton Studio TRIM KITS B/S T T T T T Shower T T T T T Valve T T T T T rev. 01/10 PRESSURE BALANCE BATH/SHOWER FBS - 111

3 Trim Kit Finishes UPGRADABLE flow. TRIM KITS ONLY. VALVE MUST BE ORDERED SEPARATELY. COLONY SOFT Description T BATH/SHOWER Trim Kit T SHOWER ONLY Trim Kit Roughing-In Dimensions 1-5/8" TO 3-1/ T VALVE ONLY Trim Kit 5-1/8" REF. RELIANT 3 T BATH/SHOWER Trim Kit T SHOWER ONLY Trim Kit 108mm (4-1/4 REF.) 1-5/8"" TO 3-1/ 152mm (6 REF.) T VALVE ONLY Trim Kit 5-1/8" REF RELIANT 3 T BATH/SHOWER Trim Kit T SHOWER ONLY Trim Kit 108mm (4-1/4 REF.) 1-5/8"" TO 3-1/ 152mm (6 REF.) 9" (228mm) 1 (330mm) T VALVE ONLY Trim Kit 5-1/8" REF FBS-112 CERAMIX T BATH/SHOWER Trim Kit Cast Brass shower arm Cast Brass diverter tub spout T SHOWER ONLY Trim Kit Cast Brass shower arm T VALVE ONLY Trim Kit.295 PRESSURE BALANCE BATH/SHOWER Satin (PVD) Note: Trim kits CANNOT be used with Ceramix spool type valves. 1/2" MIN. 1-5/8" TO 3-1/ 7-1/8" REF. (182mm) 4-3/ (121mm) 6-11/1 (170mm) rev. 08/08

4 flow. TRIM KITS ONLY. VALVE MUST BE ORDERED SEPARATELY. Trim Kit Description Finishes Roughing-In Dimensions JASMINE T BATH/SHOWER Trim Kit Rain showerhead Cast brass diverter tub spout T SHOWER ONLY Trim Kit Rain showerhead T BATH/SHOWER Trim Kit Blackened Bronze (PVD) Satin (PVD) Pol. Chrome/Brass (PVD) mix. 2" (51mm) 4-7/8" (123mm) 1-1/2" MIN. 8. (215mm) 1-1/2" MIN. 7-1/ (184mm) 1-5/8" TO 3-1/ (194mm) (194mm) TENDENCE T BATH/SHOWER Trim Kit Cast brass diverter tub spout T SHOWER ONLY Trim Kit T BATH/SHOWER Trim Kit 7" 1-1/2" 9" REF. (233mm) 1/2" MIN. 1-5/8"" TO 3-1/ (41mm - 83 mm) (190mm) 2-3/ (70mm) (190mm) PRINCETON T BATH/SHOWER Trim Kit Showerhead arm and flange Slip-on diverter tub spout.068 Blackened Bronze (PVD) 1-5/8" TO 3-1/ T SHOWER ONLY Trim Kit Showerhead arm and flange 3-5/8 (92mm) 1-1/2 REF. 8-1/8" (205mm) Hot Off T BATH/SHOWER Trim Kit rev. 08/08 PRESSURE BALANCE BATH/SHOWER FBS - 113

5 Trim Kit Finishes UPGRADABLE flow, FloWise TM showerhead with 1.25gpm/5.7L/min. TRIM KITS ONLY. VALVE MUST BE ORDERED SEPARATELY. Description Roughing-In Dimensions MOMENTS T BATH/SHOWER Trim Kit.075 Stainless Steel (PVD) Adjustable 3 function showerhead Brass diverter tub spout T SHOWER ONLY Trim Kit Adjustable 3 function showerhead T VALVE ONLY Trim Kit 5-5/8" REF. (143mm) 7 FOR HEAD 2-3/8" (60mm) 8-1/8" REF. (216mm) OPTIONAL 1-1/2" REF. 6-1/2" (165mm) 8-3/8" SHR(213mm) TUB TOP OF TUB RIM 3/ TO 2-3/8" (19mm-60mm) GREEN TEA T BATH/SHOWER Trim Kit 6 3/ Rain showerhead Brass shower arm Metal diverter tub spout.075 Stainless Steel (PVD) 79mm 3-1/8" REF. 241mm 9-1/2" REF. 1-5/8" TO T SHOWER ONLY Trim Kit 6 3/ Rain showerhead Brass shower arm "SEE ILLUSTRATION " 1880mm 457mm OPTIONAL 109mm 4-3/1 191mm 7-1/2" Dia. T VALVE ONLY Trim Kit 117mm 4-5/8" REF. 149mm 5-7/8" REF. 102mm COLONY SOFT FloWise T BATH/SHOWER Trim Kit FloWise TM Watersaving, Turbine spray Showerhead T SHOWER ONLY Trim Kit FloWise TM Watersaving, Turbine spray Showerhead 5-1/8" REF. 1-5/8" TO 3-1/ FBS-114 PRESSURE BALANCE BATH/SHOWER rev. 08/08