Brown & Heim Reviewed by: Brandon Jachimski Brown & Heim Reviewed on:

Transcription

1 Project Name: Northwest Hospital OR Renovations Bid Package #2 B&H Project #: 9790 B&H Purchase Order #: Date: Contractor: Brown & Heim, Inc. Supplier: Broadway Electric Items Submitted: Isolation Panelboards Panelboards Low Voltage Transformers Starters Safety Switches Specification Number: Various See above Brown & Heim Reviewed by: Brandon Jachimski Brown & Heim Reviewed on: Notes: Panels COR3B, COR4A, COR5B have a 25kVA transformer and a 60A 480v main circuit breaker. This transformer is required to provide the dual voltage output of 120v & 208v. The load has not increased. Please see corresponding RFI regarding the feeder size. I have made preliminary comments. These will be included when released. Please feel free to correct them as needed.

2 Northwest Hospital OR Renovations Approval Drawing Package Factory Order #: Distributor: Capital Tristate Contractor / Installer: Brown & Heim, Inc. Consulting Engineer: Leach Wallace Associates Craig Morgan Sales Representative Shawn Turner Project Manager North American Operating Division (410) Shawn.Turner@schneider-electric.com Make the most of your energy SM 1 of 64

3 Table of Contents MEDICAL PRODUCTS PANELBOARDS LOW VOLTAGE TRANSFORMER STARTERS SAFETY SWITCH SERVICES 2 of 64

4 Q2C Number: Quote Number: 1 Revision Number: 1 Project Name: NORTHWEST HOSPITAL Quote Name: Item No. Qty. Catalog Number / Details Designation: COR3A SIP10EA Isolated Power Panel SIP10EA 10kVA isolation transformer Transformer(s) as separate line item. Primary voltage volts Secondary voltage volts 30 Amp primary circuit breaker 8-2 pole 20 Amp circuit breakers Additional 1-2 pole 20 Amp CB as separate lineitem 0-30A Green Ground Receptacles with no 120V receptacles. Trim as separate line item Flush backbox as separate line item. Contact Medical Products Group for drawings. Revision: (131002/140102) Transformer SXM10EA Trim ST4526 Backbox SB Amp Circuit Breakers QO Designation: COR3A SXM10EA Hospital Grade Isolation Transformer Designation: COR3A ST4526 Front Trim for Isolated Power Panel Designation: COR3A SB Backbox for Isolated Power Panel Designation: COR3A QO220 MINIATURE CIRCUIT BREAKER 120/240V 20A

5 Q2C Number: Quote Number: 1 Revision Number: 1 Project Name: NORTHWEST HOSPITAL Quote Name: Item No. Qty. Catalog Number / Details Designation: COR3B SID25EB10A26A52 Dual Output Voltage Panel SID25EB10A26A52 10/15kVA isolation transformer Transformer(s) as separate line item. Primary voltage volts Secondary voltage - 120/208V 60 Amp primary circuit breaker 6-2 pole 20 Amp circuit breakers Additional 2-2 pole 20 Amp CB as separate Lineitem 2 2 pole 50 Amp circuit breakers 0-30A Green Ground Receptacles with no 120V receptacles. Trim as separate line item Flush backbox as separate line item. Contact Medical Products Group for drawings. Revision: (131002/140102) Transformer SXM25EB10 Trim ST5336 Backbox SB Amp Circuit Breakers QO Designation: COR3B SXM25EB10 Transformer SXM25EB Designation: COR3B ST5336 Trim ST Designation: COR3B SB ISOLATED POWER BOX FLUSH 14" DEEP Designation: COR3B QO220 MINIATURE CIRCUIT BREAKER 120/240V 20A

6 Q2C Number: Quote Number: 1 Revision Number: 1 Project Name: NORTHWEST HOSPITAL Quote Name: Item No. Qty. Catalog Number / Details Designation: COR4A SID25EB10A26A52 Dual Output Voltage Panel SID25EB10A26A52 10/15kVA isolation transformer Transformer(s) as separate line item. Primary voltage volts Secondary voltage - 120/208V 60 Amp primary circuit breaker 6-2 pole 20 Amp circuit breakers Additional 2-2 pole 20 Amp CB as separate Lineitem 2 2 pole 50 Amp circuit breakers 0-30A Green Ground Receptacles with no 120V receptacles. Trim as separate line item Flush backbox as separate line item. Contact Medical Products Group for drawings. Revision: (131002/140102) Transformer SXM25EB10 Trim ST5336 Backbox SB Amp Circuit Breakers QO Designation: COR4A SXM25EB10 Transformer SXM25EB Designation: COR4A ST5336 Trim ST Designation: COR4A SB ISOLATED POWER BOX FLUSH 14" DEEP Designation: COR4A QO220 MINIATURE CIRCUIT BREAKER 120/240V 20A

7 Q2C Number: Quote Number: 1 Revision Number: 1 Project Name: NORTHWEST HOSPITAL Quote Name: Item No. Qty. Catalog Number / Details Designation: COR4B SIP10EA Isolated Power Panel SIP10EA 10kVA isolation transformer Transformer(s) as separate line item. Primary voltage volts Secondary voltage volts 30 Amp primary circuit breaker 8-2 pole 20 Amp circuit breakers Additional 1-2 pole 20 Amp CB as separate lineitem 0-30A Green Ground Receptacles with no 120V receptacles. Trim as separate line item Flush backbox as separate line item. Contact Medical Products Group for drawings. Revision: (131002/140102) Transformer SXM10EA Trim ST4526 Backbox SB Amp Circuit Breakers QO Designation: COR4B SXM10EA Hospital Grade Isolation Transformer Designation: COR4B ST4526 Front Trim for Isolated Power Panel Designation: COR4B SB Backbox for Isolated Power Panel Designation: COR4B QO220 MINIATURE CIRCUIT BREAKER 120/240V 20A

8 Q2C Number: Quote Number: 1 Revision Number: 1 Project Name: NORTHWEST HOSPITAL Quote Name: Item No. Qty. Catalog Number / Details Designation: COR5A SIP10EA Isolated Power Panel SIP10EA 10kVA isolation transformer Transformer(s) as separate line item. Primary voltage volts Secondary voltage volts 30 Amp primary circuit breaker 8-2 pole 20 Amp circuit breakers Additional 1-2 pole 20 Amp CB as separate lineitem 0-30A Green Ground Receptacles with no 120V receptacles. Trim as separate line item Flush backbox as separate line item. Contact Medical Products Group for drawings. Revision: (131002/140102) Transformer SXM10EA Trim ST4526 Backbox SB Amp Circuit Breakers QO Designation: COR5A SXM10EA Hospital Grade Isolation Transformer Designation: COR5A ST4526 Front Trim for Isolated Power Panel Designation: COR5A SB Backbox for Isolated Power Panel Designation: COR5A QO220 MINIATURE CIRCUIT BREAKER 120/240V 20A

9 Q2C Number: Quote Number: 1 Revision Number: 1 Project Name: NORTHWEST HOSPITAL Quote Name: Item No. Qty. Catalog Number / Details Designation: COR5B SID25EB10A26A52 Dual Output Voltage Panel SID25EB10A26A52 10/15kVA isolation transformer Transformer(s) as separate line item. Primary voltage volts Secondary voltage - 120/208V 60 Amp primary circuit breaker 6-2 pole 20 Amp circuit breakers Additional 2-2 pole 20 Amp CB as separate Lineitem 2 2 pole 50 Amp circuit breakers 0-30A Green Ground Receptacles with no 120V receptacles. Trim as separate line item Flush backbox as separate line item. Contact Medical Products Group for drawings. Revision: (131002/140102) Transformer SXM25EB10 Trim ST5336 Backbox SB Amp Circuit Breakers QO Designation: COR5B SXM25EB10 Transformer SXM25EB Designation: COR5B ST5336 Trim ST Designation: COR5B SB ISOLATED POWER BOX FLUSH 14" DEEP Designation: COR5B QO220 MINIATURE CIRCUIT BREAKER 120/240V 20A

10 9 of 64

11 Schneider lectric ISOGARd LineIsolationMonitor Schneider lectric ISOGARd LineIsolationMonitor ã, 10 of 64

12 11 of 64

13 Schneider lectric ISOGARd LineIsolationMonitor Schneider lectric ISOGARd LineIsolationMonitor ã, 12 of 64

14 13 of 64

15 Schneider lectric ISOGARd LineIsolationMonitor Schneider lectric ISOGARd LineIsolationMonitor ã, 14 of 64

16 15 of 64

17 16 of 64

18 17 of 64

19 Medical Isolated Power Panels Catalog 4800CT Class 4800 CONTENTS Description Page Overview Ordering Information Components Panel Types Accessories Technical Data of 64

20 Medical Isolated Power Panels Overview Isolated Power Systems Isolated power systems offer an invaluable advantage in medical settings early detection allows critical systems to remain online when hazardous current is present. The system gives a visual indication of the level of current in milliamperes (ma). If the system reaches a threshold of 3.7 ma, the visual and audible alarm indicates the presence of an excessive amperage level instead of disconnecting the circuit. These systems provide isolated power in operating rooms and other critical areas. An isolation transformer serves a single operating room, except when supplying equipment requiring 150 V or higher (example: receptacles for laser/x-ray machines). A line isolation monitor Indicates possible leakage or fault currents from all isolated conductors to ground. A green LED remains lit when the system is adequately isolated from ground Under normal voltage conditions, a red LED lamp and audible warning signal activate when a fault hazard current (fault leakage current only) reaches a threshold value of 3.7 ma, or when the total hazard current reaches a threshold value of 5.0 ma A digital display indicates the total hazard current of the system Incoming power (customer connection) Main circuit breaker Controlled Isolated Power Panel Electrostatic shield connected to panel ground bus Line Isolation Monitor To panel ground bus To system ground (customer connection) Ordering Information Panel ground bus The products offered in this catalog can be ordered using the Schneider Electric Product Configurator: MEDICAL PRODUCTS ISO GARD 2 03/ Schneider Electric All Rights Reserved 19 of 64

21 Isolated Power Panel Components (Feeding 120, 208, or 240 V power circuits) Medical Isolated Power Panels Components Isolation Transformer Hospital-grade isolation transformers from Schneider Electric provide isolation between system voltage and load requirements. Single-phase kva range: 3, 5, 7.5, 10, 15, 25 A Primary voltages: 120, 208, 240, 277, or 480 V Secondary voltages: 120, 208, or 240 V Class 180 insulation Electrostatic shield Maximum sound level of 35dB Low leakage Compliance with UL 1047 (tables 30.1 and 30.2) and CSA Z32.2 NQ Panelboard Interiors Schneider Electric has designed a single-phase, NQ panelboard interior for use in isolated power panels. Accepts plug-on or bolt-on branch circuit breakers 100 A interiors 2012 Schneider Electric All Rights Reserved 03/ of 64

22 Medical Isolated Power Panels Components QO Branch Circuit Breakers 10k AIR QO (plug on) or QOB (bolt on) 20 A; 2-pole (120 V) 20, 30, 50 or 60 A; 2-pole (208 or 240 V) Primary Circuit Breakers PowerPact H-frame circuit breaker 2-pole; size is based on transformer kva and chosen primary voltage Iso-Gard Series 6 Line Isolation Monitor (LIM) Automatic operating voltage selection reduces repairs and technical calls and increases customer satisfaction Automatic self test with data logging reduces time required to perform periodic testing Communications bus provides centralized monitoring of LIM installations to improve predictive maintenance Built-in ground fault location system reduces the time required to locate detected fault(s) Plain text menu interface makes setting easier and alarms clearer Electrical system measurements help determine root cause of detected fault Feature Value Feature Value Blood warmer proof (bear hugger) Yes Load current monitoring Yes Measuring range Z ISO kw Transformer temperature monitor Yes Measuring range R ISO kw Automatic operating voltage selection Yes Measuring range C LEAK nf Automatic self test Yes (selectable time) Trip time (0 - > 5 ma) 3.5 sec. Line to line voltage measurement V Trip tolerance (THC) ma Line to ground voltage measurement > V Detected fault location Yes Detected faulty line indication Yes Event memory with time stamp Yes Select different measuring frequencies Yes Communication bus compatibility Full Split core measuring current Device settings Plain text transformer Yes 4 03/ Schneider Electric All Rights Reserved 21 of 64

23 Efficient solutions designed to meet multiple needs Standard Isolated Power Panel Iso-Gard Series 6 line isolation monitor Primary circuit breaker (8) 20 A, 2-pole, Square D brand branch circuit breakers Mounting provisions for (8) additional 20 A, 2-pole circuit breakers Reference ground bar with 20 terminals Designed for 120 V applications Available in 3, 5, 7.5, and 10 kva Ideal for operating rooms or critical areas Medical Isolated Power Panels Panel Types Standard Panel Enhancements Field convertible up to (16) 20 A, 2-pole, Square D brand branch circuit breakers Receptacles Red or ivory Duplex or single Twist-lock Power and ground modules Optional bolt-on circuit breakers Allows for centralized location of receptacles and ground jacks Accessories Power and ground modules Hospital-grade ground cords Remote indicator Remote annunciator stations 2012 Schneider Electric All Rights Reserved 03/ of 64

24 Medical Isolated Power Panels Panel Types Controlled Isolated Power Panels Panels with circuit control have a secondary circuit breaker that is connected to a maximum of eight branch circuits. The configuration of which circuits receive power is made at the factory to meet customer requirements. The selection of a secondary circuit is typically door-contact-controlled at the individual receptacle station or from a push button station built into the isolated power panel. No power will be delivered to a secondary circuit until the secondary breaker is closed. Iso-Gard Series 6 line isolation monitor Primary circuit breaker (8) Square D brand, 20 A, 2-pole, branch circuit breakers Mounting provisions for (8) additional 20 A, 2-pole circuit breakers Reference ground bar with 20 terminals Designed for 208 or 240 V applications Customized control to meet customer requirements Available in 7.5, 10, 15, or 25 kva Ideal for X-ray and laser equipment; control option is available for supplying power to portable equipment Customized control optionprogrammable logic controller (PLC) to interface with the 208/240 V receptacle module accessory Dual Voltage Isolated Power Panels Combines standard (120 V) and controlled (208 or 240 V) panels into one space-saving solution. Primary circuit breaker 120 V output Iso-Gard Series 6 line isolation monitor (8) Square D brand, 20 A, 2-pole, branch circuit breakers Mounting provisions for (8) additional 20 A, 2-pole circuit breakers Reference ground bar with 20 terminals Available in 3, 5, 7.5, and 10 kva Up to 8 receptacles Up to 8 ground jacks 208 or 240 V output Iso-Gard Series 6 line isolation monitor (2) Square D brand, 20 A, 2-pole, branch circuit breakers Reference ground bar with 20 terminals Customized control to meet customer requirements Available in 15 kva 1 2 laser outlets 6 03/ Schneider Electric All Rights Reserved 23 of 64

25 Medical Isolated Power Panels Panel Types Duplex Operating Room Panels Ideal for locations where space is limited, for renovations, or for minimizing leakage current on the individual panel and transformer. Each panel features the following items: Iso-Gard Series 6 line isolation monitor Primary circuit breaker (8) Square D brand, 20 A, 2-pole, branch circuit breakers Mounting provisions for (8) additional 20 A, 2-pole circuit breakers Reference ground bar with 20 terminals Designed for 120 V applications Available in 3, 5, 7.5, and 10 kva Surgical Facility Centers Iso-Gard Series 6 line isolation monitor Primary circuit breaker (8) Square D brand, 20 A, 2-pole, branch circuit breakers Mounting provisions for (8) additional 20 A, 2-pole circuit breakers Reference ground bar with 20 terminals Designed for 120 V applications Available in 3, 5, 7.5, and 10 kva Options Field convertible up to (16) Square D brand, 20 A, 2-pole, branch circuit breakers Receptacles Red or ivory Duplex or single Twist-lock Power and ground modules Convert circuit breakers to bolt-on Enhancements X-ray viewer or dry erase board Digital clock/elapsed time timer CD player/radio with portable media player integration 2012 Schneider Electric All Rights Reserved 03/ of 64

26 Medical Isolated Power Panels Accessories Accessories Power and Ground Modules Flush or surface mounting Up to 8 ground jacks Receptacles Up to 8 Red or ivory Duplex or single Twist-lock Ground bar Aluminum or copper Local code requirements (for example, Chicago) Ground Modules Flush or surface mounting Up to 8 ground jacks Hospital-grade Ground Cords Ground lugs Insulated clips Power Receptacle Modules Flush or surface mounting 20 A NEMA #6-15R NEMA #6-20R NEMA #L6-15R NEMA #L6-20R 30 A NEMA #6-30R NEMA #L6-30R 50 A NEMA #6-50R Hubbel #IN A Hubbel #IN16494 Remote Indicator Controls 8 03/ Schneider Electric All Rights Reserved 25 of 64

27 Medical Isolated Power Panels Accessories Remote Indicating Devices The National Electric Code (NEC) requires an indicator alarm in each operating room. When panels are mounted outside the operating room, remote indicating devices are mandatory. Remote indicator alarms are designed for use with isolated power panels manufactured by Schneider Electric. The alarms indicate the condition of the LIM. Available as optional accessories, these alarms include various combinations of indicating lights (green = normal condition, yellow = silence, red = hazard condition), audible alarms, and milliammeters. When the flow to ground is within the predetermined limits for the circuits being monitored, a constant green light remains illuminated. When this predetermined limit is exceeded, the green light goes out, the red indicator illuminates, and an audible signal sounds. Pressing the silence button disconnects the audible signal. The yellow indicator illuminates, reminding personnel that the audible signal is disconnected. When the predicted leakage current to ground returns to an acceptable level, the unit automatically resets and the green indicator lights illuminates once again. Remote indicator alarms manufactured by Schneider Electric are available in an annunciator panel for monitoring from a single, central location. Many hospitals feel it necessary to monitor each operating room at a central location. The combined annunciator panel units meet this need. Latest Technology Enhance the remote indicators by adding: Real-time indication of operating and alarm messages Text display with backlit LCD (4 x 20 / 3 lines) Freely programmable text messages Alarm history with real-time clock to save messages Available with 12 digital inputs 200 freely programmable text messages; 250 save messages 1000 freely programmable text messages; 1000 save messages 2012 Schneider Electric All Rights Reserved 03/ of 64

28 Medical Isolated Power Panels Technical Data Standard Isolated Power Panel Wiring Diagram H2 X1 Incoming power H1 X2 Panel ground L1 L L1 L2 12 Vdc Com A B RI1 K1/NC K1/COM K1/NO SAFE HAZARD RI2 GND2 LIM GND TEST 1S1 Z1/M + 1S2 Z2/M - K2/COM K2/NC K2/NO To remote indicator and accessories (if required) Panel ground To system ground Panel ground Receptacles and ground jacks are options. Options Standard Isolated Power Panel Enhancements kva Primary Voltage Secondary Voltage Mounting Circuit Breakers No. of 20 A, 2-pole Circuits Ground Bar Remote Indicator 120 V Receptacles Ground Jacks Flush Surface Plug-on Bolt-on 8 field installed 9 16 shipped separately Standard IG2000P 0 8 Red duplex Ivory duplex Red single Ivory single L5 L20 twist lock / Schneider Electric All Rights Reserved 27 of 64

29 Standard Isolated Power Panel Medical Isolated Power Panels Technical Data OutlineStandard Isolated Power Panel Flush 1 (25) Surface 0 (0) 24 (610) Top View 6 (152) Flush 1 (25) Surface 0 (0) 24 (610) Top View 8 (203) Dual dimensions: Inches (mm) Flush 26 (660) Surface 24 (610) Flush 1 (25) Surface 0 (0) 6 (152) Flush 26 (660) Surface 24 (610) Flush 1 (25) Surface 0 (0) 8 (203) Flush 45 (1143) Surface 43 (1092) 43 (1092) Flush 45 (1143) Surface 43 (1092) 43 (1092) Front View Side View Front View 3 and 5 kva 7.5 and 10 kva Side View OutlineStandard Isolated Power Panel with Enhancements Flush 1 (25) Surface 0 (0) 24 (610) Top View Flush 26 (660) Surface 24 (610) 8 (203) Dual dimensions: Inches (mm) Flush 1 (25) Surface 0 (0) 8 (203) Flush 50 (1270) Surface 48 (1220) 48 (1220) Front View 3, 5, 7.5, and 10 kva Side View 2012 Schneider Electric All Rights Reserved 03/ of 64

30 Medical Isolated Power Panels Technical Data Controlled Isolated Power Panel Wiring Diagram Incoming power Panel ground M5 M3 M L1 H2 H1 To receptacles L2 T1 X1 X M4 M2 F2 F1 H2 H1 T1 L1 L2 12 Vdc Com A B RI1 K1/NC K1/COM K1/NO SAFE HAZARD RI2 GND2 LIM GND TEST 1S1 Z1/M + 1S2 Z2/M - K2/COM K2/NC K2/NO X1 F3 120 V X2 Panel ground Panel ground To system ground Panel ground S/S X1 X3 X5 X7 L N X0 X2 X4 X6 FX1s-14MR-ES/UL 0V Y0 Y1 Y2 Y4 24V COM 0 COM 1 COM 2 Y3 Y5 M1 M2 M4 M3 M5 AC1 M1 AC2 M2 AC3 M3 AC4 M4 AC5 M5 TB Safe 12 Vdc Com Hazard Door contact Door contact Safe 12 Vdc Com Hazard Door contact Door contact Safe 12 Vdc Com Hazard Door contact Door contact Safe 12 Vdc Com Hazard Door contact Door contact Safe 12 Vdc Com Hazard Door contact Door contact Receptacle Module #4 Receptacle Module #2 Receptacle Module #3 Receptacle Module #4 Receptacle Module # / Schneider Electric All Rights Reserved 29 of 64

31 Controlled Isolated Power Panel Medical Isolated Power Panels Technical Data Options Controlled Isolated Power Panel X-Ray Module kva Primary Voltage Secondary Voltage Mounting Type of Control PLC No. of Laser Circuits No. of Hot Circuits Secondary Breaker Quantity Mounting Type of Power Receptacle Flush Surface Door contact with lamp Door contact without lamp Push button panel Remote push button A 30 A 50 A 60 A Match circuits Recessed Surface NEMA #6-15R or #L6-15R NEMA #6-20R or #L6-20R NEMA #6-30R or #L6-30R NEMA #6-50R Hubbel #IN16494 Outline 24 (762) Dual dimensions: Inches (mm) 14 (356) 5 (127) Top View 32 (819) 14 (356) 53 (1346) 51 (1295) Front View Side View 2012 Schneider Electric All Rights Reserved 03/ of 64

32 Medical Isolated Power Panels Technical Data Dual Voltage Isolated Power Panel Wiring Diagram Incoming power L1 H2 H1 Panel ground L2 T X3 X4 X2 X1 L1 L2 12 Vdc Com A B RI1 K1/NC K1/COM K1/NO SAFE HAZARD RI2 GND2 LIM GND TEST 1S1 Z1/M + 1S2 Z2/M - K2/COM K2/NC K2/NO Receptacles and ground jacks are options. Low Voltage Section To system ground To remote indicator and accessories (if required) Panel ground Panel ground L1 L2 L1 L2 12 Vdc Com A B RI1 K1/NC K1/COM K1/NO SAFE HAZARD RI2 GND2 LIM GND TEST 1S1 Z1/M + 1S2 Z2/M - K2/COM K2/NC K2/NO High Voltage Section To system ground To remote indicator and accessories (if required) Panel ground Panel ground 14 03/ Schneider Electric All Rights Reserved 31 of 64

33 Dual Voltage Isolated Power Panel Medical Isolated Power Panels Technical Data Options Dual Voltage Isolated Power Panel 120 V 208/240 V kva Primary Voltage Secondary Voltage Mounting Ground Bar Remote Indicator Circuit Breakers No. of 20 A, 2-pole Circuits 120 V Receptacles Ground Jacks Type of Power Receptacle Rating 5/15 7.5/15 10/ / /240 Flush Surface Standard IG2000P Plug-on Bolt-on 8 field installed 9 16 shipped separately 0 8 Red duplex Ivory duplex Red single Ivory single L5 L20 twist lock 0 8 NEMA #6-15R or #L6-15R NEMA #6-20R or #L6-20R NEMA #6-30R or #L6-30R NEMA #6-50R Hubbel #IN A 30 A 50 A 60 A Outline 34 (864) Dual dimensions: Inches (mm) 14 (356) Flush 1 (25) Surface 0 (0) Top View Flush 36 (914) Surface 34 (864) Flush 1 (25) Surface 0 (0) 14 (356) Flush 58 (1473) Surface 56 (1422) 56 (1422) Front View Side View 2012 Schneider Electric All Rights Reserved 03/ of 64

34 Medical Isolated Power Panels Technical Data Duplex Operating Room Panels Wiring Diagram System A System B Incoming power L1 L2 12 Vdc Com A B RI1 K1/NC K1/COM K1/NO SAFE HAZARD RI2 GND2 LIM GND TEST 1S1 Z1/M + 1S2 Z2/M - K2/COM K2/NC K2/NO To remote indicator and accessories (if required) Panel ground Incoming power L1 L2 12 Vdc Com A B RI1 K1/NC K1/COM K1/NO SAFE HAZARD RI2 GND2 LIM GND TEST 1S1 Z1/M + 1S2 Z2/M - K2/COM K2/NC K2/NO To remote indicator and accessories (if required) Panel ground L1 L2 L1 L To system ground To system ground H2 X1 H2 X1 H1 X2 H1 X2 Panel ground Panel ground Panel ground Panel ground 16 03/ Schneider Electric All Rights Reserved 33 of 64

35 Duplex Operating Room Panels Medical Isolated Power Panels Technical Data Options a Duplex Operating Room Panel kva Primary Voltage Secondary Voltage Mounting Circuit Breakers Flush Plug-on Surface Bolt-on a Options are for both the left and right side; selection is required for each side. Outline No. of 20 A, 2-pole Circuits 8 field installed 9 16 shipped separately Ground Bar Standard 34 (864) Dual dimensions: Inches (mm) Flush 1 (25) Surface 0 (0) Top View 8 (203) Flush 36 (914) Surface 34 (864) System A System B Flush 1 (25) Surface 0 (0) 8 (203) Flush 36.5 (927) Surface 35.5 (902) Flush 73 (1854) Surface 71 (1803) 71 (1803) Flush 36.5 (927) Surface 35.5 (902) Front View Side View 2012 Schneider Electric All Rights Reserved 03/ of 64

36 Schneider Electric USA, Inc Airpark Center Drive Nashville, TN Iso-Gard, PowerPact, QO, QOB, Square D, and Schneider Electric are trademarks or registered trademarks of Schneider Electric. Other trademarks used herein are the property of their respective owners. 4800CT Schneider Electric All Rights Reserved Replaces 4800CT9801R4/08 dated 04/ / of 64

37 Q2C Number: Quote Number: 1 Revision Number: 1 Project Name: NORTHWEST HOSPITAL Quote Name: Item No. Qty. Catalog Number / Details PANELBOARDS Designation: CDP-B NF ML PNLB (INT,BOX,TRIM) NF Panelboard Consisting of 480Y/277V 3Ph 4W 60Hz SCCR: 25kA Fully Rated Main Lug Only: 150A Incoming Conductors: 1 - #6-350 kcmil Bus: Copper: Silver/Tin Plated CU Ground Bar 42 Circuit Interior Type 1,Box: 44H x 20W x 5.75D Incoming: Bottom Trim: Surface - Hinged Box Cat No: MH44BE Front Cat No: NC44SHR Ref. Drawing: PBA550HR Feeders: 3-25A/2P EGB 9-20A/1P EGB 27-20A/1P EGB Prepared Space Optional Features: Ship Together,Blank Endwalls,Copper Solid Neutral,Copper Ground Bar Designation: EQ-OR ILINE ML PNLB (INT,BOX,TRIM) I-Line Panelboard Consisting of 480V 3Ph 3W 60Hz Ungrounded SCCR: 14kA Fully Rated Main Lug Only: 225A Incoming Conductors: 1 - (2) #4-600 kcmil Bus: Copper: Tin Plated CU Ground Bar 63" of Mounting Inches Type 1,Box: 74H x 26W x 6.5D Incoming: Bottom Trim: Surface - Hinged Box Cat No: HC2674B Front Cat No: HC2674TSHR Ref. Drawing: PBA400HR Type: HCN Feeders: 9-20A/3P FA Prepared Space 5-30A/3P FA Optional Features: Ship Together,Copper Ground Bar,Standard Mains and Feeders Mechanically Restrained 36 of 64

38 Q2C Number: Quote Number: 1 Revision Number: 1 Project Name: NORTHWEST HOSPITAL Quote Name: Item No. Qty. Catalog Number / Details Designation: ORP - 2B NQ MB PNLB (INT,BOX,TRIM) NQ Panelboard Consisting of 208Y/120V 3Ph 4W 60Hz SCCR: 10kA Fully Rated Single Main: 150A/3P QB Circuit Breaker Incoming Conductors: 1 - #4-300 kcmil Bus: Copper: Silver/Tin Plated CU Ground Bar 42 Circuit Interior Type 1,Box: 50H x 20W x 5.75D Incoming: Bottom Trim: Surface - Hinged Box Cat No: MH50 Front Cat No: NC50SHR Ref. Drawing: PBA707HR Feeders: 2-50A/2P QOB 16-20A/1P QOB 22-20A/1P QOB Prepared Space Optional Features: Ship Together,Copper Solid Neutral,Copper Ground Bar Designation: CDP-ER NF ML PNLB (INT,BOX,TRIM) NF Panelboard Consisting of 480Y/277V 3Ph 4W 60Hz SCCR: 35kA Fully Rated Main Lug Only: 225A Incoming Conductors: 1 - #6-350 kcmil Bus: Copper: Silver/Tin Plated CU Ground Bar 30 Circuit Interior Type 1,Box: 38H x 20W x 5.75D Incoming: Bottom Trim: Surface - Hinged Box Cat No: MH38 Front Cat No: NC38SHR Ref. Drawing: PBA550HR Feeders: 2-100A/3P EGB 3-25A/2P EGB 9-20A/1P EGB 6-20A/1P EGB Prepared Space 1-50A/3P EGB Optional Features: Ship Together,Copper Solid Neutral,Copper Ground Bar 37 of 64

39 38 of 64

40 39 of 64

41 40 of 64

42 41 of 64

43 I-Line Power Panelboards Our I-Line power distribution panel is the most versatile on the market. It s used to feed NQ and NF lighting and appliance panelboards. I-Line panelboards can also feed large motors and HVAC systems. Factory Options Split bus bar Sub-feed/thru-feed lugs through 1200A Optional 200% rated neutrals through 1200A Thermal-mag or solid state circuit breakers Plated copper or aluminum bus Optional customer metering with PowerLogic power meters or circuit monitors Plug-in TVSS modules 100,000A 240,000A plug-in TVSS Door in door or hinged trim Six circuit QO 240V plug-in distribution module Ground fault protection available on main or branch circuit breakers Current density-rated panelboard bus Features 600Vac, 250Vdc maximum 1200A main circuit breaker or main lugs 1200A maximum branch circuit breaker 200,000A SCCR when using current limiting main or branch circuit breakers Fully rated and series rated systems available Interiors available in plated copper or aluminum bus Suitable for use as service entrance equipment Complete line of UL/cUL listed interiors with 200% rated neutrals for non-linear loads Sub-feed or through-feed lugs through 1200A Interiors accept plug-on thermal magnetic or solid state branch circuit breakers Interior, front and most circuit breakers only require a screwdriver for installation Branch circuit breaker mounting not restricted by location on bus stack Capable of mounting 15A branch circuit breaker across from or next to a 1200A branch circuit breaker Branch circuit breakers have no loose mounting hardware and install in as little as 20 seconds with only a screw driver Branch circuit breakers are simple to rearrange in the field, limited restrictions on mounting locations 100,000A 240,000A field installable plug-in TVSS units Available with or without door, or with hinged trim Broad range of field installable kits available from stock 42 of 64

44 THIS PAGE WAS INTENTIONALLY LEFT BLANK 43 of 64

45 NF Lighting Panelboards The NF panelboard offers superior performance and application flexibility for commercial and industrial electrical systems up to 600Y/347Vac. This versatile lighting and power distribution panelboard features a wide selection of circuit breakers, accessories and ready-to-install kits, as well as 200% rated neutrals for non-linear loads. Factory Options 1P3W or 3P4W 800A main lugs and 600A main breaker panelboards Sub-feed and thru-feed lugs Sub-feed circuit breakers Optional 200% rated neutrals through 600A Split bus bars TVSS - 100,000A 240,000A surge current rating - All voltage systems Lighting contactors Customer equipment space Features 600Y/347Vac maximum 600A maximum main circuit breaker, 800A maximum main lugs 14,000A through 200,000A SCCR Sub-feed circuit breakers are vertically mounted 125A maximum branch mounted circuit breakers (110A for 600Y/347V) Interiors are field convertible to top or bottom feed Bolt-on branch circuit breakers attach with captive screws Visi-Trip indication on branch circuit breakers Suitable for use as service equipment Complete line of UL/cUL listed interiors with 200% rated neutrals for non-linear loads 20" wide trims and boxes common for NF and NQ panelboards Mono-flat or hinged trims Vertically mounted main breakers available, all amperages Branch circuit filler plates provide fast and easy installation Ready-to-Install Panels and Kits Available from Stock 100A 600A MLO 3P4W interiors Type 1 and 3R/12 enclosures 100A 400A main circuit breaker kits 120,000A or 160,000A surge current ratings 100A 400A sub-feed and thru-feed lugs Sub-feed circuit breaker kits A sub-feed circuit breaker per 250A panelboard A sub-feed circuit breakers per 400A or 600A panelboard 200% neutral kits up to 400A Copper neutrals and equipment ground bars 44 of 64

46 THIS PAGE WAS INTENTIONALLY LEFT BLANK 45 of 64

47 NQ Lighting Panelboards Developed with electrical contractor input, the NQ family of lighting and appliance panelboards sets new standards for ease of installation and durability. Plus, new design innovations increase the availablity of these panelboards by offering complete ready to install products. Features 240Vac, 48Vdc maximum 600A maximum main circuit breakers or main lugs 150A maximum branch circuit breakers 10,000A through 200,000A SCCR Both fully rated and series rated systems are available Interiors are field convertible to top or bottom feed Interiors are available in plated copper or aluminum bus Interiors accept both bolt-on and plug-on branch circuit breakers Complete line of UL/cUL listed interiors with 200% rated neutrals for non-linear loads Suitable for use as service entrance equipment 20" wide trims and boxes common for NQ and NF panelboards Mono-flat or hinged trims Factory Options 1P3W or 3P4W 600A main lugs and main breaker panelboards Sub-feed and thru-feed lugs Sub-feed circuit breakers Optional 200% rated neutrals up to 400A Split bus bars TVSS - 100,000A 240,000A surge current rating - All voltage systems Lighting contactors Customer equipment space Ready-to-Install Panels and Kits Available from Stock 100A 600A MLO 1P3W and 3P4W Interiors NEMA 1 and 3R/12 enclosures 100A 400A main circuit breaker kits TVSS interiors - 120,000A or 160,000A surge current ratings 100A 400A sub-feed and thru-feed lugs Sub-feed circuit breaker kits A sub-feed circuit breaker per 225A panelboard A sub-feed circuit breakers per 400A panelboard 200% neutral kits up to 400A Copper neutrals and equipment ground bars 46 of 64

48 THIS PAGE WAS INTENTIONALLY LEFT BLANK 47 of 64

49 Q2C Number: Quote Number: 1 Revision Number: 1 Project Name: NORTHWEST HOSPITAL Quote Name: Item No. Qty. Catalog Number / Details LOW VOLTAGE TRANSFORMER Designation: T-1 EE45T3H Transformer Dry Type 45kVA 480D208Y of 64

50 49 of 64

51 50 of 64

52 Energy Efficient Transformers Low Voltage General Purpose Dry Type Catalog 7400CT0601R3/07 07 Class 7400 CONTENTS Description Page Product Description General Information Three-Phase Transformers /120 Four-Wire Delta Connection Transformers Single-Phase Transformers Non-Linear Energy Efficient Transformers Watchdog Low Temperature Rise Transformers Made-To-Order Transformers Enclosure Diagrams and Accessories Wiring Diagrams NEC Reference: Installing and Connecting Transformers Wire Range Part Numbers and Lug Kits Specifications Frequently Asked Questions and Answers of 64

53 Energy Efficient Transfomers Product Description Product Description Key Features of the Square D Energy Efficient Dry-Type Transformers Smaller total area used, with 3 in. (76 mm) clearance from ventilated openings instead of 6 in. (152 mm), reducing the distance from the wall to the front of the device by 3 in. (76 mm) Terminals are sized to handle lug kits that are coordinated with other Square D products, increasing the ease of installation when used with other Square D equipment Increased wiring compartments provide a bending radius for 250% primary cables and multiple feeds on the secondary All units have 200% neutral to allow customers to feed standard and non-linear panels 220 C UL Listed insulation system Decreased weight for easier handling of units Energy Policy Act The Energy Policy Act of 2005 declared the following information regarding low voltage dry-type distribution transformers: The efficiency of a low voltage dry-type distribution transformer manufactured on or after January 1, 2007 shall be the Class I Efficiency Levels for distribution transformers specified in Table 4-2 of the Guide for Determining Energy Efficiency for Distribution Transformers, published by the National Electrical Manufacturers Association (NEMA TP-12002). Schneider Electric introduced the first TP1-compliant low voltage dry-type distribution transformers in December With the 2005 Energy Act, Schneider Electric is expanding its offering of TP-1-compliant products by launching a new line of TP-1 qualified transformers. NATURAL RESOURCES CANADA Natural Resources Canada declared the following information regarding dry-type transformers and the energy performance test procedure: Dry-Type Transformers The Office of Energy Efficiency (OEE) of Natural Resources Canada (NRCan) has amended Canada's Energy Efficiency Regulations to require Canadian dealers to comply with minimum energy performance standards for dry-type transformers imported or shipped inter-provincially for sale or lease in Canada. These regulations and subsequent amendments were published in the Canadian Gazette Part 1 in May Energy Performance Test Procedure The Canadian Standards Association standard CAN/CSA-C , Minimum Efficiency Values for Dry-Type Transformers, is the test procedure for transformers under regulation. The test procedure is the same as that in the National Electrical Manufacturers Association (NEMA TP-11996), Guide for Determining Energy Efficiency for Distribution Transformers and associated document TP-21998, Standard Test Method for Measuring the Energy Consumption of Distribution Transformers, in the United States Schneider Electric All Rights Reserved 04/ of 64

54 Energy Efficient Transformers General Information General Information Saving Money by Saving Energy Minimum efficiencies have been established for each size of transformer, and extensive design, testing, and manufacturing time has been spent to ensure each transformer meets or exceeds these efficiencies. Surveys show that typical loading of low voltage dry-type transformers on a 24-hour average basis is only 35% of full-load rating. At such loading levels, Square D Lean Power Energy Efficient Transformers manufactured by Schneider Electric provide the best combination of optimal performance and superior quality. The Square D Energy Efficient transformer offering includes all of the popular options including low temperature rise, 115 C and 80 C, and aluminum or copper windings. These transformers are part of a complete line of Lean Power products from Schneider Electric. Our power conservation, management and monitoring products, systems, and services help to reduce energy consumption in business and industry environments. Table 1: Transformer Efficiency Levels Single-Phase Three-Phase kva % Efficiency kva % Efficiency Temperature: 75 C, 35% of full-load capacity Three-phase energy efficient transformer (top cover, and all panels removed) 04/ Schneider Electric All Rights Reserved 3 53 of 64

55 THIS PAGE WAS INTENTIONALLY LEFT BLANK 54 of 64

56 Q2C Number: Quote Number: 1 Revision Number: 1 Project Name: NORTHWEST HOSPITAL Quote Name: Item No. Qty. Catalog Number / Details STARTERS SCG11V81CFF4P42P46T10 Class 8538 Non-fused Combination Starter Class 8538 Non-fused Combination Starter 8538SCG11V81CFF4P42P46T10 NEMA Size 1 Non-fused combination starter Non-reversing 3 phase 3 pole device Type 1 Enclosure Melting alloy overload Starter will require 3 thermal units Standard with NC overload contact Specified for 460V 3Ph power system Fused control transformer selected with 120V 60Hz coil T10 - Extra 50VA capacity CPT 480 Volt primary 120 Volt secondary Fusing F4-2 primary control fuses F - 1 secondary control fuse Auxiliary contacts - None Internal NC auxiliary contact for off pilot light Control units supplied C - HAND-OFF-AUTO selector switch Pilot lights supplied P42 - Power ON red pilot light (LED-PTT) P46 - Power OFF green pilot light (LED-PTT) Revision: (140102/131030) FG1P MANUAL STARTER 277VAC 55 of 64

57 56 of 64

58 ADDITIONAL CONTROL CIRCUIT FOR ACCESSORIES* STANDARD CONTROL CIRCUIT (WITHOUT FORMS) 57 of 64

59 THIS PAGE WAS INTENTIONALLY LEFT BLANK 58 of 64

60 59 of 64

61 Manual Starters Type FFractional Horsepower Class 2510, 2512 / Refer to Catalog 2510CT Fractional Horsepower Manual Starters with Melting Alloy Type Thermal Overload Relay Table 16.1: Type of Operator No. of Poles Basic StarterClass 2510 Toggle Key Single-Unit TypesClass 2510Rated 16 A Thermal Units Prices shown do not include thermal units. Standard trip thermal units are $21.50 each. See page for selection information. Features Standard With Red Pilot Lightc Standard With Red Pilot Lightc Standard With Red Pilot Lightc Standard With Red Pilot Lightc NEMA 1 General Purpose Enclosure Surface Mounting Standard Oversized Gray Flush Plate General Purpose Flush Mounting (Without Pull Box) Standard Stainless Steel Flush Plate Jumbo Stainless Steel Flush Plate NEMA Type 4a Watertight and Dusttight Enclosure NEMA Types 3R, 7 & 9 Hazardous Locations Div. 1 & 2 Class I Groups B, C, & D & Class II Groups E, F & G Enclosure Type Type Type Type Type Type Type Type FG1 FG1P FG2 FG2P FG3 FG3P FG4 FG4P Starter with Handle Guard/Lock-OffClass 2510 FGJ1 FGJ1P FGJ2 FGJ2P FGJ3 FGJ3P FGJ4 FGJ4P FF1 FF1P FF2 FF2P FF3 FF3P FF4 FF4P FS1 FS1P FS2 FS2P FS3 FS3P FS4 FS4P FSJ1P FSJ2P FSJ3P FSJ4P Standard 1 With Red Pilot Light c FG5 FGJ5 FW1 FR1 FG5P FGJ5P Order basic starter plus FW1P b 1 Toggle Standard FG6 FGJ6 separate handle guard kit. FW2 FR2 2 With Red Pilot Lightc FG6P FGJ6P FW2P b 1 a Furnished with one 3/4" pipe tap in bottom (reversible for top feed). To obtain 3/4" pipe tap top and bottom, add suffix letter H to type number and add $19.10 to price. b For replacement starter, order open type above. For NEMA 4 with pilot light, retain pilot light mounting bracket from original device. Table 16.2: Duplex UnitsClass 2510 Type of Operator No. of Poles Features NEMA 1 General Purpose Enclosure Surface Mounting FO1 FO1P FO2 FO2P FO3 FO3P FO4 FO4P General Purpose Flush Mounting (Without Pull Box) Gray Flush Plate for Wall or Cavity Mounting Stainless Steel Flush Plate for Wall or Cavity Mounting Open Type Replacement Starter Class 2510 Type Type Type Type One Starter in Duplex EnclosureClass 2510 Standard FG02 Toggle 2 With Red Pilot Light c FG02P 1 Key 2 With Red Pilot Light c FG04P 1 Two Starters in One EnclosureClass 2510 Toggle 2 Each Str. Standard With Red Pilot Light on Eachc FG22 FG22P FF22 FF22P FS22P 2 Key 2 Each Str. With Red Pilot Light on Eachc FG44P FF44P FS44P 2 Starter and AUTO-OFF-HAND SPDT Selector Switch (AC Only)Class 2510 Standard FG71 FF71 1 With Red Pilot Light c FG71P FF71P FS71P 1 Toggle 2 Standard FG72 FF72 1 With Red Pilot Lightc FG72P FF72P FS72P Key 2 With Red Pilot Lightc FG74P FF74P FS74P 1 Two Speed Starters (AC Only)Class 2512 With Mechanical Interlock: Standard FG11 FF11 FO1T 1 With 2 Red Pilot Lightsc FG11P FF11P FO1PT With HIGH-OFF-LOW Selector Switch: Toggle With 2 Red Pilot Lightsc FS101P FO1PT With Mechanical Interlock: Standard FG22 FF22 FO2T 2 Pilot Lightsc With 2 Red FG22P FF22P FO2PT With HIGH-OFF-LOW Selector Switch: With 2 Red Pilot Lightsc FS202P FO2PT c For green pilot light, add the letter G to the catalog number (i.e. 2510FG2PG). Replacement Starter Class 2510 Number of Thermal Units Required Number of Thermal Units Required 2 2 Type FG2P Table 16.3: Horsepower Ratings Type F Note: Continuous current rating16 A. Maximum Horsepower Volts AC Single Phase DC 1-Pole 2-Pole 2-Pole Only / Table 16.4: Approvals2510 Type F and K Enclosed Open (UL Listed) File E42243 (UL Component Recognized) File E42243 CCN NLRV CCN NLRV2 CSA Certified File LR25490 Class Table 16.5: To Order Specify: Class Number Type Number How to Order Catalog Number Class Type 2510 FG1 Type FO2 CP1 Discount Schedule 2012 Schneider Electric All Rights Reserved 60 of 64

62 THIS PAGE WAS INTENTIONALLY LEFT BLANK 61 of 64

63 Q2C Number: Quote Number: 1 Revision Number: 1 Project Name: NORTHWEST HOSPITAL Quote Name: Item No. Qty. Catalog Number / Details SAFETY SWITCH Designation: 100 AMP FSS H363N SWITCH FUSIBLE HD 600V 100A 3P NEUTRAL Enclosure Type: Type 1 Interrupting Rating (AIR): 10kA Fuse Capability: Class H or K Max System Voltage: 600 VAC Switch Current Rating: 100 Amp Number of Switching Poles: 3 Pole w/ Neutral Neutral Kit: Field or Factory Installed: Factory Processed by ACE of 64

64 63 of 64

65 Q2C Number: Quote Number: 1 Revision Number: 1 Project Name: NORTHWEST HOSPITAL Quote Name: Item No. Qty. Catalog Number / Details SERVICES SIBS STARTUP Q2C or Reference Number At your request and based upon the information you have provided, we are pleased to submit the following proposal for Schneider Electric Services to provide start-up and commissioning services on the electrical equipment being installed in your facility at in Baltimore, MD. Scope of Work Specifically, experienced field service technician(s) will perform visual, mechanical and electrical tests on the following equipment, as outlined in our Procedures for the Startup and Commissioning of Electrical Equipment (attached). You will receive a copy of the test reports which can serve as a benchmark for future preventive maintenance and testing activities. Workscopes to be Performed (On applicable Equipment) Isolated Power Systems Additional Items Relavent Designations of Equipment Workscopes Listed Above , Equipment: Medical Panels, Designation: COR3A , Equipment: Medical Panels, Designation: COR4B , Equipment: Medical Panels, Designation: COR5A Notes: Please refer to formal quote document for full details. 64 of 64