Product data sheets Vibration mounts

Size: px
Start display at page:

Download "Product data sheets Vibration mounts"

Transcription

1 Product data sheets Vibration mounts Vibration Mounts, Expansion Bellows, Rain Caps, Pipe/Deck Penetrations SB Broneske, Celebrating Engineering Excellence since 1972 Internet: Phone: Fax.:

2 FIX POINT SBB sáäê~íáçå=jçìåíw==cáñ=éçáåí=åçãéêéëëáçå=ãçìåí==ïáíü=áåíéöê~íéç=ïéäçáåö=éä~íé Elastic support for exhaust pipe systems to reduce structure borne noise and to reduce vibrations. SB =j~íéêá~ä=w=jáäç=ëíééäi=páäáåçåé =oéëçå~ååé=ñêéèìéååów=vjom=eò =qéãééê~íìêé==ê~åöéw=jomø`=ìé=íç=hpmmø` ==iç~çw=smmkjommmk=eúsmâö=íç=omm=âöf ==téáöüí=çñ=~ëëéãääów=nir=âö =aéëáöåéç=ñçê=åçãéêéëëáçå=äç~çë=çåäó =püé~ê=éêççñ=çéëáöå PMMM ORMM OMMM iç~ç=ekf NRMM NMMM RMM M M MIR N NIR O OIR P PIR Q péêáåö=çéñäéåíáçå=eããf

3 FIX POINT SBB sáäê~íáçå=jçìåíw==cáñ=éçáåí=åçãéêéëëáçå=ãçìåí==ïáíü=ïéäçáåö=éä~íé Elastic support for exhaust pipe systems to reduce structure borne noise and to reduce vibrations. SB Welding plate 2 x Screw 2 x Washer Premounted =j~íéêá~ä=w=jáäç=ëíééäi=páäáåçåé =oéëçå~ååé=ñêéèìéååów=vjom=eò =qéãééê~íìêé==ê~åöéw=jomø`=ìé=íç=hpmmø` ==iç~çw=nmmmkjqmmmk=eúnmmâö=íç=qmm=âöf ==téáöüí=çñ=~ëëéãääów=p=âö =aéëáöåéç=ñçê=åçãéêéëëáçå=äç~çë=çåäó =püé~ê=éêççñ=çéëáöå Load (N) ,5 1 1,5 2 2,5 3 Spring deflection (mm)

4 FIX POINT SBB sáäê~íáçå=jçìåíw==cáñ=éçáåí=åçãéêéëëáçå=ãçìåí==ïáíü=ïéäçáåö=éä~íé Elastic support for exhaust pipe systems to reduce structure borne noise and to reduce vibrations. SB Welding plate 4 x Screw 4 x Washer Premounted =j~íéêá~ä=w=jáäç=ëíééäi=páäáåçåé =oéëçå~åò=ñêéèìéååów=vjom=eò =qéãééê~íìêé==ê~åöéw=jomø`=ìé=íç=hpmmø` ==iç~çw=ommmkjtrmmk=eúommâö=íç=trm=âöf ==téáöüí=çñ=~ëëéãääów=s=âö =aéëáöåéç=ñçê=åçãéêéëëáçå=äç~çë=çåäó =püé~ê=éêççñ=çéëáöå Load (N) ,5 1 1,5 2 2,5 3 3,5 Spring deflection (mm)

5 FIX POINT SBB sáäê~íáçå=jçìåíw==cáñ=éçáåí=åçãéêéëëáçå=ãçìåí==ïáíü=ïéäçáåö=éä~íé Elastic support for exhaust pipe systems to reduce structure borne noise and to reduce vibrations. SB Welding plate 4 x Screw 4 x Washer Premounted =j~íéêá~ä=w=jáäç=ëíééäi=páäáåçåé =oéëçå~åò=ñêéèìéååów=vjom=eò =qéãééê~íìêé==ê~åöéw=jomø`=ìé=íç=hpmmø` ==iç~çw=rmmmkjnrmmmk=eúrmmâö=íç=nrmmâöf ==téáöüí=çñ=~ëëéãääów=nm=âö =aéëáöåéç=ñçê=åçãéêéëëáçå=äç~çë=çåäó =püé~ê=éêççñ=çéëáöå Load (N) ,5 1 1,5 2 2,5 3 3,5 Spring deflection (mm)

6 ANCHORAGE POINT SBB sáäê~íáçå=jçìåíw=qéåëáçåj`çãéêéëëáçå=jçìåí=p_snmmmi=ïáíü=íìêåäìåâäéi=íüêé~çéç=êçç=ermmããfi=ñçêâ=åêçïå=~åç=äçäí=áå=ñçêâ=åêçïå Elastic sway brace for exhaust pipe systems to reduce structure borne noise and vibration and compensate for thermal expansion of the pipe. Vibration Mount SB Turn buckle Threaded rod (500mm) Fork crown Bolt with pin mounted in fork crown =j~íéêá~ä=ìëéç=ñçê=~ää=åçãéçåéåíëw=jáäç=ëíééä =qìêå=äìåâäéi=ñçêâ=åêçïåi=íüêé~çéç=êççw=d~äî~åáòéç =oéëçå~ååé=ñêéèìéååów=tjnr=eò =qéãééê~íìêé=ê~åöéw=jomø`=íç=humø` =qéãééê~íìêé=ê~åöéw=jqøc=íç==ntsøc ==i=z=oom=ãã=j=tmu=ãã ==iç~çw=rmmkjommmk=eúrmâö=íç==ommâöf ==téáöüí=çñ=~ëëéãääów=oip=âö

7 ANCHORAGE POINT SBB sáäê~íáçå=jçìåíw=qéåëáçåj`çãéêéëëáçå=jçìåí=p_snmmni=ïáíü=íìêåäìåâäéi=íüêé~çéç=êçç=ermmããfi=ñçêâ=åêçïå=~åç=äçäí=áå=ñçêâ=åêçïå Elastic sway brace for exhaust pipe systems to reduce structure borne noise, and vibration and compensate for thermal expansion of the pipe. Vibration Mount SB Turn buckle Threaded rod (500mm) Fork crown Bolt with pin mounted in fork crown =j~íéêá~ä=ìëéç=ñçê=~ää=åçãéçåéåíëw=jáäç=ëíééä =qìêå=äìåâäéi=ñçêâ=åêçïåi=íüêé~çéç=êççw=d~äî~åáòéç =oéëçå~ååé=ñêéèìéååów=tjnr=eò =qéãééê~íìêé==ê~åöéw=jomø`=íç=humø` =qéãééê~íìêé=ê~åöéw=jqøc=íç==ntsøc ==i=z=ovmãã=j=tsmãã ==iç~çw=ntrmkjprmmk=eúntrâö=íç=prm=âöf ==téáöüí=çñ=~ëëéãääów=pit=âö

8 ANCHORAGE POINT SBB sáäê~íáçå=jçìåíw=qéåëáçåj`çãéêéëëáçå=jçìåí=p_snmmni=ïáíü=íìêåäìåâäéi=íüêé~çéç=êçç=ermmããfi=ñçêâ=åêçïå=~åç=äçäí=áå=ñçêâ=åêçïå Elastic sway brace for exhaust pipe systems to reduce structure borne noise, and vibration and compensate for thermal expansion of the pipe. Vibration Mount SB Turn buckle Threaded rod (500mm) Fork crown Bolt with pin mounted in fork crown =j~íéêá~ä=ìëéç=ñçê=~ää=åçãéçåéåíëw=jáäç=ëíééä =qìêå=äìåâäéi=ñçêâ=åêçïåi=íüêé~çéç=êççw=d~äî~åáòéç =oéëçå~ååé=ñêéèìéååów=tjnr=eò =qéãééê~íìêé==ê~åöéw=jomø`=íç=humø` =qéãééê~íìêé=ê~åöéw=jqøc=íç==ntsøc ==i=z=prmãã=j=ummãã ==iç~çw=pmmmkjnmmmmk=eúpmmâö=íç=nmmmâöf ==téáöüí=çñ=~ëëéãääów==riu=âö

9 ANCHORAGE POINT SBB sáäê~íáçå=jçìåíw=^ååüçê~öé=éçáåí=ïáíü=îáäê~íáçå=ãçìåí=p_snmmpi=íìêå=äìåâäéi=íüêé~çéç=êçç=ermmããfi=ñçêâ=åêçïå=~åç=äçäí=áå=ñçêâ=åêçïå Elastic sway brace for exhaust pipe systems to reduce structure borne noise, and vibration and compensate for thermal expansion of the pipe. Vibration Mount SB Turn buckle Threaded rod (500mm) Fork crown Bolt with pin mounted in fork crown =j~íéêá~ä=ìëéç=~ää=åçãéçåéåíëw=jáäç=ëíééä =qìêå=äìåâäéi=ñçêâ=åêçïåi=íüêé~çéç=êççw=d~äî~åáòéç =oéëçå~ååé=ñêéèìéååów=tjnr=eò =qéãééê~íìêé==ê~åöéw=jomø`=íç=humø` =qéãééê~íìêé=ê~åöéw=jqøc=íç==ntsøc ==i=z=pvmãã=j=urmãã ==iç~çw=nmmmmkjpmmmmk=eúnmmmâö=íç=pmmmâöf ==téáöüí=çñ=~ëëéãääów==nm=âö

10 FIX POINT SBB sáäê~íáçå=jçìåíw==qéåëáçå=åçãéêéëëáçå=ñáñ=éçáåí=åçãéêéëëáçå=ãçìåí==ïáíü=áåíéöê~íéç=l=êéãçî~ääé=ïéäçáåö=éä~íé Elastic support for exhaust pipe systems to reduce structure borne noise and to reduce vibrations. SB Welding plate 4 x Screw 4 x Washer Premounted =j~íéêá~ä=w=jáäç=ëíééäi=páäáåçåé =oéëçå~ååé=ñêéèìéååów=nnjom=eò =qéãééê~íìêé==ê~åöéw=jomø`=ìé=íç=hpmmø` ==iç~çw=rmmmkjnsmmmk=eúrmmâö=íç=nsmm=âöf ==téáöüí=çñ=~ëëéãääów=nnir=âö =aéëáöåéç=ñçê=íéåëáçå=~åç=åçãéêéëëáçå=äç~ç =püéêéêççñ=çéëáöå Specifications subject to change without notice; Photo for illustration only. Version:

11 FIX POINT SBB sáäê~íáçå=jçìåíw==qéåëáçå=åçãéêéëëáçå=ñáñ=éçáåí=åçãéêéëëáçå=ãçìåí==ïáíü=áåíéöê~íéç=l=êéãçî~ääé=ïéäçáåö=éä~íé Elastic support for exhaust pipe systems to reduce structure borne noise and to reduce vibrations. SB Welding plate 4 x Screw 4 x Washer Premounted =j~íéêá~ä=w=jáäç=ëíééäi=páäáåçåé =oéëçå~ååé=ñêéèìéååów=nnjom=eò =qéãééê~íìêé==ê~åöéw=jomø`=ìé=íç=hpmmø` ==iç~çw=ommmkjummmk=eúommâö=íç=umm=âöf ==téáöüí=çñ=~ëëéãääów=s=âö =aéëáöåéç=ñçê=íéåëáçå=~åç=åçãéêéëëáçå=äç~ç =püéêéêççñ=çéëáöå Specifications subject to change without notice; Photo for illustration only. Version:

12 FIX POINT SBB sáäê~íáçå=jçìåíw==qéåëáçå=åçãéêéëëáçå=ñáñ=éçáåí=åçãéêéëëáçå=ãçìåí==ïáíü=áåíéöê~íéç=l=êéãçî~ääé=ïéäçáåö=éä~íé Elastic support for exhaust pipe systems to reduce structure borne noise and to reduce vibrations. SB Welding plate 4 x Screw 4 x Washer Premounted =j~íéêá~ä=w=jáäç=ëíééäi=páäáåçåé =oéëçå~ååé=ñêéèìéååów=nnjom=eò =qéãééê~íìêé==ê~åöéw=jomø`=ìé=íç=hpmmø` ==iç~çw=nmmmkjqmmmk=eúnmmâö=íç=qmm=âöf ==téáöüí=çñ=~ëëéãääów=p=âö =aéëáöåéç=ñçê=íéåëáçå=~åç=åçãéêéëëáçå=äç~ç =püéêéêççñ=çéëáöå Specifications subject to change without notice; Photo for illustration only. Version:

13 FIX POINT SBB sáäê~íáçå=jçìåíw==qéåëáçå=åçãéêéëëáçå=ñáñ=éçáåí=ñçê=ëí~åçáåö=áåëí~ää~íáçå=áååäìçáåö=ïéäçáåö=éä~íé Elastic support for exhaust pipe systems to reduce structure borne noise and to reduce vibrations. SB Welding plate 4 x Screw 4 x Washer Premounted =j~íéêá~ä=w=jáäç=ëíééäi=páäáåçåé =oéëçå~ååé=ñêéèìéååów=nnjom=eò =qéãééê~íìêé==ê~åöéw=jomø`=ìé=íç=hpmmø` ==iç~çw=rmmkjommmk=eúrmâö=íçomm=âöf ==téáöüí=çñ=~ëëéãääów=p=âö =aéëáöåéç=ñçê=íéåëáçå=~åç=åçãéêéëëáçå=äç~ç =püéêéêççñ=çéëáöå Specifications subject to change without notice; Photo for illustration only. Version:

14 EXPANSION BELLOW SBFXX.XXX bñé~åëáçå=_éääçïw=bñü~ìëí=ö~ë=éñé~åëáçå=äéääçïëi=ãìäíójéäói=äççó=ëí~áåäéëë=ëíééä=nkqrqni=ñä~åöéë=eêçí~íáåöi=äçêçéêéçf=afkusmqq Expansion Bellow for the exhaust pipe system to compensate the heat expansion of the exhaust pipe sections. Stainless steel body, multy-ply 2 x flanges DIN86044 Flanges bordered to body (rotating) Diameter 10mm to 5000mm available Material body: Material flanges: mild steel, painted (red primer) Axial/Lateral Movement ; Individual Rotating flanges bordered to body Temperatur range: -10 C to 550 C =qéãééê~íìêé=ê~åöéw=nqøc=íç==nmooøc Exhaust gas pressure: max. 1 bar Prestressed EL=Fitted length in cold exhaust pipe

15 PIPE PENETRATION: RAIN CAP SBRxxx o~áå=`~éw=bñü~ìëí=ö~ë=ééåéíê~íáçå=ñçê=íüé=ñìååéä=íçé Diameter: 80mm to 3500mm available Material cap: Mild steel, painted (red primer) Material inner ring: Mild steel, painted (red primer) Temperature range: -40 C to 550 C =qéãééê~íìêé==ê~åöéw=jqmøc=ìé=íç=hnmooøc Additional sizes and materials available on request Silicone cushions SB7 must be installed as shown in this technical specification. Silicone cushions SB7 must not be directly in contact with the exhaust pipe. Rain Cap for the exhaust pipe to protect the funnel against rain water and splash water. This rain cap was designed to minimise the structure borne noise at the funnel top. Rain cap Silicone cushions SB7 with nut, bolt (premounted) Inner Ring xsuppliedbysbbroneskeexhaustpipefunneltopraincap(pos.1:cap)xraincappos2:innerring)xcushionsb-7xbolt,nutm8x

16 PIPE PENETRATION: WATER TIGHT (FIX) SBPxxx máéé=méåéíê~íáçåw=t~íéê=íáöüí=çéåâ=~åç=äìäâüé~ç=ééééåíê~íáçå=ñçê=éñü~ìëí=éáéé=ëóëíéãë Deck & bulkhead penetration for the exhaust pipe system of ships. Designed to reduce structure borne noise and vibrations. Steel ring (Pos. 1) & Steel ring (Pos. 2) Gasket (Pos. 3+4) Bushing (Pos. 2) Srew (Pos. 1) Read for installation (completely pre mounted) Diameter: 80mm to 3500mm available Material flanges: Mild steel, painted (red primer) Material gasket, bushing: Silicone Temperature range: -20 C up to 300 C Additional sizes and materials available on request Penetration acts like a fix point

17 PIPE PENETRATION: FLEXIBLE FIRE- AND WATER TIGHT (FLEXIBLE) SBPxxx máéé=méåéíê~íáçåw=cáêéj=c=t~íéêíáöüí=çéåâ=~åç=äìäâüé~ç=ééééåíê~íáçå=ñçê=éñü~ìëí=éáéé=ëóëíéãë Deck & bulkhead penetration for the exhaust pipe system of ships. Zero structure borne noise transfer. Zero vibration tansfer. Steel ring (Pos. 3) & Holder ring (Pos. 4) Firetight/Watertight (Pos. 1) Insulation (Pos. 6), Clips (Pos. 2) Inside Ring (Pos. 5) Read instructions (completely pre mounted) Diameter: 80mm to 3500mm available Material: Mild steel, painted (red primer) Material firetight: Special layer Material watertight: Special layer Temperature range: -20 C to 1000 C Temperature range: -4 F to 1832 F Additional sizes and materials available on request Penetration is flexible and must not be subject to force or stress.

Vibration Mounts & Expansion Bellows for the exhaust pipe system. Product Data Sheets

Vibration Mounts & Expansion Bellows for the exhaust pipe system. Product Data Sheets Vibration Mounts & Expansion Bellows for the exhaust pipe system Product Data Sheets SB Broneske Ernst-Abbe-Str. 9 25451 Quickborn/Hamburg Germany Phone: +49-4106-80750-0 Fax.: +49-4106-80750-10 mail@broneske.de

More information

Vibration Mounts Installation Instructions Manual

Vibration Mounts Installation Instructions Manual Vibration Mounts Installation Instructions Manual www.broneske.de mail@broneske.de Telefax.: +49-4106-80750-10 Copyrights: 25451 Quickborn/Hamburg - Germany www.broneske.de mail@broneske.de Phone: +49-4106-80750-0

More information

Spark arrestor type C

Spark arrestor type C Spark arrestor type C Spark arrestors of type C are especially designed for applications in exhaust systems with high demands regarding explosion risk. The spark arrestors are to be mounted in the flues

More information

3.1 Stainless steel exhaust bellows

3.1 Stainless steel exhaust bellows 3.1 Stainless steel exhaust bellows There are two basic types of expansion bellows singles and doubles, and their purpose is to absorb the movement in any pipework run that is fixed between two fixed points.

More information

BEARINGS The lower bearing assemble is constructed to allow continuous operation when fully submerged in wastewater.

BEARINGS The lower bearing assemble is constructed to allow continuous operation when fully submerged in wastewater. GENERAL SPECIFICATION INTENT The equipment to be supplied by manufacturer includes the screw pumps, support for the drive unit, profile plates, motors, gearboxes, couplings, guards, upper and lower bearing

More information

BUTTERFLY VALVE WITH WELDED ENDS INSTALLATION AND MAINTENANCE MANUAL

BUTTERFLY VALVE WITH WELDED ENDS INSTALLATION AND MAINTENANCE MANUAL BUTTERFLY VALVE 31300 SERIES INSTRUCTIONS FOR INSTALLATION, USE AND MAINTENANCE 1. Overview Read these instructions carefully before starting the valve installation and start-up work. Safe keep the instructions

More information

mm Hex Nuts. (2) 10mm x 35mm Bolt Plates

mm Hex Nuts. (2) 10mm x 35mm Bolt Plates PARTS LIST: SPORT BAR 1 Sport Bar 8 12mm x 24mm OD x 2.5mm STD Flat Washers 1 Driver/Left Frame 6 12mm Lock Washers 1 Passenger/Right Frame 4 12-1.75mm Hex Nuts 1 Driver/Left Tube 2 10-1.50mm x 30mm Hex

More information

DIN EN : (E)

DIN EN : (E) DIN EN 13480-3:2017-12 (E) Metallic industrial piping - Part 3: Design and calculation Contents Page European foreword... 10 1 Scope... 12 2 Normative references... 12 3 Terms, definitions, symbols and

More information

Industrial Residential Critical Residential

Industrial Residential Critical Residential Industrial Residential ritical Residential N 41 010 562 759 2017 Page 2 To Order all: 07 3274 2666 Industrial and residential rated silencers are constructed from HRQ sheet steel and fully welded construction.

More information

PSI CASING END SEALS FOR CASING PIPE CLOSURE FOR PROTECTION AGAINST MOISTURE AND DIRT ALSO FOR RETROFITTING INDIVIDUAL CUSTOMIZED SOLUTIONS

PSI CASING END SEALS FOR CASING PIPE CLOSURE FOR PROTECTION AGAINST MOISTURE AND DIRT ALSO FOR RETROFITTING INDIVIDUAL CUSTOMIZED SOLUTIONS PSI CASING END SEALS FOR CASING PIPE CLOSURE FOR PROTECTION AGAINST MOISTURE AND DIRT ALSO FOR RETROFITTING INDIVIDUAL CUSTOMIZED SOLUTIONS WWW.PSI-PRODUCTS.COM 111 PSI Casing End Seals Pipes carrying

More information

1ZSE EN, REV. 7. Oil SF 6. bushings type GOEK Technical guide

1ZSE EN, REV. 7. Oil SF 6. bushings type GOEK Technical guide 1ZSE 2750-106 EN, REV. 7 Oil SF 6 bushings type GOEK Technical guide Original instruction The information provided in this document is intended to be general and does not cover all possible applications.

More information

Expansion Joints Guide Module 2a - Axial Expansion Joints General - Standard Program (EFB) - Installation Instructions

Expansion Joints Guide Module 2a - Axial Expansion Joints General - Standard Program (EFB) - Installation Instructions Expansion Joints Guide Module 2a - Axial Expansion Joints General - Standard Program (EFB) - Installation Instructions BOA Expansion Joints Guide Expansion Joints Guide Summary Module 2a 1 AXIAL EXPANSION

More information

PART 8 MACHINERY INSTALLATIONS

PART 8 MACHINERY INSTALLATIONS PART 8 MACHINERY INSTALLATIONS PART 8 MACHINERY INSTALLATIONS SECTION SUBJECT 8.1 General 8.2 Auxiliary engines 8.3 Stern gear 8.4 Propeller and nozzles 8.5 Rudders 8.6 Steering gear 8.7 Tables 8.7.1

More information

Vacuum Cleaners Vacuum Manuals ASSEMBLY SCHEMATIC MODEL NO. C1810 FOR VACUUM CLEANER PARTS PLEASE CALL

Vacuum Cleaners Vacuum Manuals ASSEMBLY SCHEMATIC MODEL NO. C1810 FOR VACUUM CLEANER PARTS PLEASE CALL ASSEMBLY SCHEMATIC 1 39467069 HANDLE N.L.A. 48631149 HANDLE ASSEMBLY COMPLETE 32.39 36222014 WEAR STRIP - LEFT 2.11 2 39454060 HANDLE GRIP 4.48 3 39442017 CORD HOOK 4.31 4 013730-- LOCK RING.38 5 21631301

More information

HTM Circulation Pumps acc. to DIN EN 733 Type NKLs

HTM Circulation Pumps acc. to DIN EN 733 Type NKLs HTM Circulation Pumps acc. to DIN EN 733 Type NKLs General The DICKOW standard HTM pumps, series NKLs according to EN 733, are designed as centrifugal pumps of light duty for handling heat transfer media.

More information

SILENCER ACCESSORIES

SILENCER ACCESSORIES GLAUNACH THE SILENCER HANDBOOK SILENCER ACCESSORIES CUSTOMISING SILENCERS TO SPECIFIC NEEDS GLAUNACH GMBH 2010 - ALL RIGHTS RESERVED - Part III page 2 of 10 LIFTING LUGS device transport and installation

More information

OE STYLE RUNNING BOARD FOR FORD ECOSPORT Before Installation

OE STYLE RUNNING BOARD FOR FORD ECOSPORT Before Installation OE STYLE RUNNING BOARD FOR FORD ECOSPORT Before Installation Please carefully read the instructions for easy installation, which will help to prevent any damage to your vehicle. The information shown here

More information

RUBBER BELLOWS general

RUBBER BELLOWS general RUBBER BELLOWS general Our rubber compensators are made from various elastomers and provide the flexible element in pipework that is indispensable in todays technically advanced plant and machinery installations.

More information

Contents. Symbols Used. Equipment Required L=R. Page. Apply Thread Lock. Apply. Silicone Oil. 30mm Fan

Contents. Symbols Used. Equipment Required L=R. Page. Apply Thread Lock. Apply. Silicone Oil. 30mm Fan Contents Content Page Content Page Content Page 0. Tool and Accessories 1.Filing the Edges of the Chassis 2.Bulkhead Installation 3.Spur Gear Assembly 4.Front Spool Assembly 5.Gear Differential Assembly

More information

ROTEX VA : Aluminium compound. The installation system for domestic and heating application.

ROTEX VA : Aluminium compound. The installation system for domestic and heating application. ROTEX VA : Aluminium compound. ROTEX VA : The installation system for domestic and heating application. Plastics technology in the future - safe, clean, fast. The ROTEX VA - installation system ROTEX VA

More information

GMC 5 Cultivator. Drawing: 287

GMC 5 Cultivator. Drawing: 287 GMC 5 Cultivator Drawing: 287 GMC 5 Cultivator Drawing: 287 GMC5-28701 GMC5-28702 GMC5-28703 GMC5-28704 GMC5-28705 GMC5-28706 GMC5-28707 GMC5-28708 GMC5-28709 GMC5-28710 GMC5-28711 GMC5-28712 GMC5-28713

More information

SOARSEIKI.Co.,Ltd

SOARSEIKI.Co.,Ltd SOARSEIKI.Co.,Ltd info@soarseiki.com 1 2 3 4 BAGS A1 FRONT AND REAR DIFF 5 BAGS A2 CENTER DIFF 5 BAGS B1 FRONT TRANSMISSION STEP B1-1 Apply a thiin layer of lubricant on the gear. GR160003 BE050110040

More information

75L & 100L JACKETED ASSEMBLY INSTRUCTIONS FOR PROCESS REACTOR SYSTEMS N. Mill Road Vineland, NJ Phone: Fax:

75L & 100L JACKETED ASSEMBLY INSTRUCTIONS FOR PROCESS REACTOR SYSTEMS N. Mill Road Vineland, NJ Phone: Fax: 3800 N. Mill Road Vineland, NJ 08360 Phone: 800.843.1794 Fax: 800.922.4361 ASSEMBLY INSTRUCTIONS FOR 75L & 100L JACKETED PROCESS REACTOR SYSTEMS 1/4 HP Electric Stirrer Motor High Efficiency Condenser

More information

Model DW Series Positive Pressure Guidelines for Engine Exhaust Systems

Model DW Series Positive Pressure Guidelines for Engine Exhaust Systems 1 Model DW Series Positive Pressure Guidelines for Engine Exhaust Systems UL Listed under Standard 103 for Flue Gas Temperatures up to 1400 F (759 C) Venting System for Factory-Built Chimneys For Building

More information

Transformer Bushing Type EKTO

Transformer Bushing Type EKTO Transformer Bushing Type EKTO Mounting Operating and Maintenance Instructions Operating Instructions BAL EKTO/04e Visum 01/14 T/gue Page 1 of 16 SAFETY INSTRUCTIONS These instructions are valid for mounting,

More information

PRODUCT CATALOGUE. PisaFlex is Mexico s premier manufacturer of metallic expansion joints and braided hose assemblies.

PRODUCT CATALOGUE. PisaFlex is Mexico s premier manufacturer of metallic expansion joints and braided hose assemblies. PRODUCT CATALOGUE PisaFlex is Mexico s premier manufacturer of metallic expansion joints and braided hose assemblies. PisaFlex is qualified to Manufacture product to ASME U Stamp. PISAFLEX / PRODUCT CATALOGUE

More information

RHL/IAM. Turbine - HKT-645 with hydraulic jack J6. 1 / 3 This drawing is the propety of Remote HydroLight and IAM, Afghanistan

RHL/IAM. Turbine - HKT-645 with hydraulic jack J6. 1 / 3 This drawing is the propety of Remote HydroLight and IAM, Afghanistan Parts List ITEM QTY No. Ref. No. TITLE DESCRIPTION 1 1 1.H6 632.100.000 Runner for HKT-64 2 1 2.H6 63N.200.000 Frame HKT-64 bottom frame 3 1 3.J6 3N.300.000 Cover HKT-64 4 1 4.H 600.201.000 Shield HKT

More information

INSTALLATION INSTRUCTIONS HEAVY DUTY FRONT BUMPER 2015 FORD F150

INSTALLATION INSTRUCTIONS HEAVY DUTY FRONT BUMPER 2015 FORD F150 INSTALLATION INSTRUCTIONS PARTS LIST: 1 Heavy Duty Bumper Assembly 14 12-1.75mm x 45mm Hex Bolts 1 Driver/Left Frame Mounting Bracket 28 12mm x 37mm x 3mm Flat Washers 1 Passenger/Right Frame Mounting

More information

ACO Marine product catalogue ACO GM-X and GM-X-VACplus drainage pipes and steel fittings for the marine industry

ACO Marine product catalogue ACO GM-X and GM-X-VACplus drainage pipes and steel fittings for the marine industry ACO Marine product catalogue ACO and -VACplus drainage pipes and steel fittings for the marine industry ACO and -VAC Table of Contents Steel drain pipes and fittings 40-250 EN 1123 ACO Marine, as a division

More information

Diagram # Part # Description Quantity

Diagram # Part # Description Quantity Diagram # Part # Description Quantity 55 016104-01MX Seat cushion L1, L2, without cover 55 016110-01MX Seat cushion L3, without cover 40 016417-01MX Subsystem L1, incl. air spring, without shock absorber,

More information

Pneumatic cylinders series CX Double acting with magnetic piston, ISO 15552, stainless steel G1/8 to G1/2 piston Ø 32 to 100 mm

Pneumatic cylinders series CX Double acting with magnetic piston, ISO 15552, stainless steel G1/8 to G1/2 piston Ø 32 to 100 mm Pneumatic cylinders series CX Double acting with magnetic piston, ISO 15552, stainless steel 000 400 Order code CX-032-0250-000 Note: Piston Ø 125, 160 and 200 on request. Series Piston Ø Stroke length

More information

SPARE PARTS EXPLODED VIEW GAS WALL BOILERS Model UNO. R EN - Edition 01-15/10/2007

SPARE PARTS EXPLODED VIEW GAS WALL BOILERS Model UNO. R EN - Edition 01-15/10/2007 SPARE PARTS EXPLODED VIEW GAS WALL BOILERS Model R8216080-01EN - Edition 01-15/10/2007 537255 24 MFFI (RO) MET...... 537256 24 MFFI (RO) GPL...... 537632 24 MFFI MET (PL, CZ, UCR)...... 537633 24 MFFI

More information

2015 Ford F150 Front Bumper w/ LED

2015 Ford F150 Front Bumper w/ LED PARTS LIST: 2015 Ford F150 Bumper w/ LED 1 Bumper Assembly 4 8mm Lock Washers 1 Driver/left L Bracket (center LED light) 2 8mm Hex Nuts 1 Passenger/right L Bracket (center LED light) 2 6mm x 20mm Button

More information

Transformer bushings, type GOH. Technical guide

Transformer bushings, type GOH. Technical guide Transformer bushings, type GOH Technical guide This Technical Guide has been produced to allow transformer manufacturers, and their designers and engineers, access to all the technical information required

More information

B8 2.0T Exhaust Installation Guidelines

B8 2.0T Exhaust Installation Guidelines STāSIS Engineering B8 2.0T Exhaust Installation Guidelines B8 2.0T Exhaust Exhaust Kit Installation Application Table Description B8 A4 2.0TFSI Exhaust Assembly (Manual and 8-speed Tiptronic) B8 A5 2.0TFSI

More information

Model DW Series Positive Pressure Guidelines for Engine Exhaust Systems

Model DW Series Positive Pressure Guidelines for Engine Exhaust Systems Model DW Series Positive Pressure Guidelines for Engine Exhaust Systems UL Listed Under: UL 103 / ULC ORD C959 UL 2561 / ULC ORD C959 UL 641 / ULC S609 1 Please note these instructions cover the additional

More information

Spearhead TWIGA. TWIGA Reach Mower 545 / 595 / 640T. Edition 1.1 April 2014 Part No

Spearhead TWIGA. TWIGA Reach Mower 545 / 595 / 640T. Edition 1.1 April 2014 Part No TWIGA Reach Mower 545 / 595 / 640T Edition 1.1 April 2014 Part No. 8999016 0 Contents Ordering Your Parts 3 A Frame 4 Tank 6 Tank Lid 8 Rear Panel 10 Slew Post 12 Lift Frame 14 Main Arm 16 Dipper Arm 18

More information

2014 RAM C/V Tradesman

2014 RAM C/V Tradesman Fig. 91: Suction Hose Ball Valve NOTE: View typical 14. Open the suction hose's ball valve to begin refilling the cooling system. 15. When the vacuum gauge reads zero, the system is filled. NOTE: On some

More information

MAKING YOUR DREAMS A REALITY. FITTING INSTRUCTIONS APRILIA RS125 Exhaust System EXCS-0019

MAKING YOUR DREAMS A REALITY. FITTING INSTRUCTIONS APRILIA RS125 Exhaust System EXCS-0019 MAKING YOUR DREAMS A REALITY FITTING INSTRUCTIONS APRILIA RS125 Exhaust System EXCS-0019 The TYGA Performance Aprilia RS-125 Stainless Steel chamber, when used with a TYGA silencer, offers huge saving

More information

Product Information. Neutral Wall Bushing GOFL

Product Information. Neutral Wall Bushing GOFL ABB Components Info-No. 2750 515-93en, Rev. 1 From / Date Product Information Neutral Wall Bushing GOFL Description Page Design 2 Voltage tap 2 Dimensions 2 Terminals 2 Mounting instruction Packing 4 Storing

More information

9 (229) 22 (559) or 24 (610) or 27 (686) 10 Lowered in (mm) 10 No Load %

9 (229) 22 (559) or 24 (610) or 27 (686) 10 Lowered in (mm) 10 No Load % 8HBW30 MAIN VEHICLE SPECIFICATIONS 1 Manufacturer 2 Model 3 Load Capacity lb (kg) 4 Power Type 5 Operator Position 6 Tire Type Drive/Load 7 Wheels Front/Rear 8 Fork Width 9 Overall Fork Width 9 (229) 22

More information

PIPE LOG BOOK. Project no:... Project:... Construction section:... On behalf of:... Commissioned by:... Order no:... Date:... Construction period:...

PIPE LOG BOOK. Project no:... Project:... Construction section:... On behalf of:... Commissioned by:... Order no:... Date:... Construction period:... FW-FERNWÄRME-TECHNIK GmbH Grafftring 2-6 D-29227 Celle Tel.: + 49 5141 888 88-0 Fax: + 49 5141 888 88-22 E-Mail: info@fw-gmbh.de Internet: www.fw-gmbh.de PIPE LOG BOOK... Project:... Construction section:...

More information

NARVIK-YARWAY. High Pressure Level Gauges, Model: 17

NARVIK-YARWAY. High Pressure Level Gauges, Model: 17 NARVIK-YARWAY Narvik-Yarway covers requirements for level gauges and electronic water level systems with a wide range of models, sizes and materials to satisfy all the specifications of the power and process

More information

DAVIMAC CHASER BIN PARTS LIST

DAVIMAC CHASER BIN PARTS LIST DAVIMAC CHASER BIN PARTS LIST FROM: 0 CB TO 9 DAVIMAC PTY LTD WELINGTON STREET MOLONG NSW STANDARD CHASER BIN - RIGHT 0 8 9 000 CHASSIS -8 008 BIN 9-0 0000 AUGER -8 000 STEP BOLTED - 000-0 BIN TO CHASSIS

More information

Series 500. Liquid Level Transmitters. Instruction Manual

Series 500. Liquid Level Transmitters. Instruction Manual Series 500 Liquid Level Transmitters Instruction Manual Contents Section Content Page 1 Introduction 1.1 General Overview 3 1.2 Mounting Options 3 2 Installation Notes 2.1 Transmitters 4 2.1.1 Model 510

More information

Wheel Load Scales WL 101. Operating Instructions

Wheel Load Scales WL 101. Operating Instructions Wheel Load Scales WL 101 Operating Instructions 1. Technical details Range Scale division 0...10 000 kg 50 kg Contents Page Accuracy OIML No. 76, Class 4 Acceptance tolerance ± 25kg (0-2500kg) ± 50kg (2500-10000kg)

More information

Handle-bar and control box. ARTIK 56 EL

Handle-bar and control box.   ARTIK 56 EL Handle-bar and control box 1 Handle-bar and control box Reference Qty Item number Description 1 1 ZM000001 Handlebar 2 2 ZM000002 Lever 3 2 ZM000003 Cap 4 2 ZM000067 Lever connecting shaft 5 1 ZM000005

More information

PSI SEALING PLUGS PRESSURE TIGHT UP TO 3 BAR HORIZONTAL AND VERTICAL MOUNTING POSITION FIVE RUBBER QUALITIES FOR DIFFERENT APPLICATIONS

PSI SEALING PLUGS PRESSURE TIGHT UP TO 3 BAR HORIZONTAL AND VERTICAL MOUNTING POSITION FIVE RUBBER QUALITIES FOR DIFFERENT APPLICATIONS PSI SEALING PLUGS PRESSURE TIGHT UP TO 3 BAR HORIZONTAL AND VERTICAL MOUNTING POSITION FIVE RUBBER QUALITIES FOR DIFFERENT APPLICATIONS WWW.PSI-PRODUCTS.COM 65 PRODUCT DESCRIPTION The PSI sealing plug

More information

SERIES ASM NEOPRENE/EPMD FLANGED SINGLE SPHERE CONNECTOR CONNECTORS. Pressures to 225 PSIG (15.51 barg) Temperatures to 230ºF (110ºC)

SERIES ASM NEOPRENE/EPMD FLANGED SINGLE SPHERE CONNECTOR CONNECTORS. Pressures to 225 PSIG (15.51 barg) Temperatures to 230ºF (110ºC) CONNECTORS APPLICATIONS Process Industry Weak Acids Alkalies Compressed Air Pulp & Paper MODELS ASM - Flanged Connection OPTIONS Control Rods Oil & Gas Water & Waste Pump suction & discharge Sea water

More information

SPRING HANGERS, SPRING SUPPORTS PRODUCT GROUP

SPRING HANGERS, SPRING SUPPORTS PRODUCT GROUP SPRING HANGERS, SPRING SUPPORTS PRODUCT GROUP VARIABLE SPRING ELEMENTS CONTENTS PAGE 0 Spring hangers, spring supports, sway braces.1 Load table for spring hangers, spring supports and other spring elements.3

More information

DESIGN CONSIDERATIONS

DESIGN CONSIDERATIONS PRESSURE THRUST DESIGN CONSIDERATIONS APPLICATIONS Intermediate Anchor An intermediate anchor is one which divides a pipeline into individual expanding pipe sections containing multiple expansion devices

More information

TOP AND CABINET PARTS

TOP AND CABINET PARTS TOP AND CABINET PARTS AUTOMATIC WASHER 11 10 Printed in U.S.A. (drd) 1 Part No. Rev. A TOP AND CABINET PARTS 1 Literature Parts W10158196 Use & Care Guide W10133490 Tech Sheet W10133489 Quick Start Guide

More information

this equipment. Does Not

this equipment. Does Not SPECIFICATIONS FOR THE SUPER SEALCOATER 550 TRAILER MOUNTED SEALCOAT APPLICATOR 420 N. Roosevelt Ave. Chandler AZ 85226 +1 800 528 8242 +1 602 276 0406 FAX +1 480 961 0513 www.crafco.com MARCH 2014 The

More information

Sealless Magnetic Coupled Hot Oil Circulation Pumps acc. to DIN EN / ISO 2858 Type NMWR / NMWB / NMW. our. contribution for

Sealless Magnetic Coupled Hot Oil Circulation Pumps acc. to DIN EN / ISO 2858 Type NMWR / NMWB / NMW. our. contribution for Sealless Magnetic Coupled Hot Oil Circulation Pumps acc. to DIN EN 22858 / ISO 2858 Type NMWR / NMWB / NMW our contribution for environmental protection General DICKOW pumps of series NMWR / NMWB / NMW

More information

COLD AIR INTAKE INSTALLATION INSTRUCTIONS. # D Fits: i (4.8L)

COLD AIR INTAKE INSTALLATION INSTRUCTIONS. # D Fits: i (4.8L) COLD AIR INTAKE INSTALLATION INSTRUCTIONS # D760-0013 Fits: 2006-10 650i (4.8L) PARTS LIST Air Box Assembly Left tube Center tube Right tube Support bracket AFM housing AFM/TB tube Hardware Kit Congratulations

More information

The GK units differ from the LK units in that the springs of the GK units have a spring eye at the front.

The GK units differ from the LK units in that the springs of the GK units have a spring eye at the front. 01 09 Installation guidelines Mechanical suspension units GK LK GN0032-0 Mechanical suspension units GK LK The GK units differ from the LK units in that the springs of the GK units have a spring eye at

More information

Pressure Reducing Valve Type 2114/2415

Pressure Reducing Valve Type 2114/2415 Pressure Reducing Valve Type 2114/2415 Fig. 1 Type 2114/2415 1. Design and principle of operation The Type 2114/2415 Pressure Reducing Valve consists of the Type 2114 Valve and the Type 2415 Actuator.

More information

5. STRAUB-FLEX / STRAUB-REP

5. STRAUB-FLEX / STRAUB-REP 5. STRAUB-FLEX / 5.1 STRAUB-FLEX For gas and water supply, sewage treatment, industrial plants, power plants and shipbuilding: STRAUB- FLEX is the optimal pipe joint. Suitable for suction or pressure lines,

More information

Personal Protection Equipment (PPE) Safety Glasses Protect eyes Welding Mask Protect eyes and face

Personal Protection Equipment (PPE) Safety Glasses Protect eyes Welding Mask Protect eyes and face Table of Contents: Title Page... 1 Introduction... 3 Before Construction... 3 Equipment Needed... 3 Drawings... 4 Construction... 5 1. Cut Sheet Drawings... 5 2. Base... 5 3. Combustion Chamber... 12 4.

More information

INSTALLATION INSTRUCTIONS JEEP WRANGLER PART# 1050 /

INSTALLATION INSTRUCTIONS JEEP WRANGLER PART# 1050 / INSTALLATION INSTRUCTIONS 2007-12 JEEP WRANGLER PART# 1050 / 1050-2 PARTS LIST: Qty Description Qty Description 1 Aries Grill guard 10 12mm Lock washers 1 Driver/left mounting bracket 10 12mm Hex nuts

More information

- METALLIC EXPANSION JOINTS

- METALLIC EXPANSION JOINTS EXPANSION JOINTS FOR PIPING SYSTEM - METALLIC EXPANSION JOINTS - NON METALLIC EXPANSION JOINTS EXPANSION JOINTS FOR PIPING SYSTEM - METALLIC EXPANSION JOINTS - NON METALLIC EXPANSION JOINTS - EXPANSION

More information

DN15 DN250 PN 16. Corrosion Protection

DN15 DN250 PN 16. Corrosion Protection PRODUCTION STANDARTS DN15 DN250 PN 16 Design DIN 3357 Connection EN 1092-2 / ISO 7005-2 Face to Face DN15-DN150: EN558 Series 14 / DIN 3202 F4 DN200-DN250: EN558 Series 27 / DIN 3202 F5 Marking EN 19 Tests

More information

Installation instructions, accessories. Parking assistance, rear

Installation instructions, accessories. Parking assistance, rear Installation instructions, accessories Instruction No 31330676 Version 1.4 Part. No. 30758088, 9487266, 30786087, 31359215 Parking assistance, rear Volvo Car Corporation Parking assistance, rear- 31330676

More information

Vacuum pad for packaging bag

Vacuum pad for packaging bag Vacuum pad for bag-like article conveyance Characteristics http://en.pisco.co.jp/ New Product Realizes followability to work-piece and posture stabilization during conveyance. Soft material is used for

More information

Refrigeration and Air Conditioning Controls. Technical leaflet. Stop valves type SVA 6-10 REFRIGERATION AND AIR CONDITIONING

Refrigeration and Air Conditioning Controls. Technical leaflet. Stop valves type SVA 6-10 REFRIGERATION AND AIR CONDITIONING Refrigeration and Air Conditioning Controls Technical leaflet Stop valves type SVA 6-10 REFRIGERATION AND AIR CONDITIONING Contents Page Introduction... 3 Features... 3 Design... 4 Technical data... 4

More information

PB-170B - Hydraulic NC Pressbrake 176T x 3200mm Estun NC-E21 Control 2-Axis with Hardened Ballscrew Backgauge

PB-170B - Hydraulic NC Pressbrake 176T x 3200mm Estun NC-E21 Control 2-Axis with Hardened Ballscrew Backgauge PB-170B - Hydraulic NC Pressbrake 176T x 3200mm Estun NC-E21 Control 2-Axis with Hardened Ballscrew Backgauge Ex GST Inc GST $40,950.00 $45,045.00 ORDER CODE: S909 MODEL: Control Unit (Type): PB-170B Estun

More information

Inductive voltage transformers

Inductive voltage transformers Inductive voltage transformers Outdoor operation Oil-paper insulated EOF (24 245) kv General description Voltage transformers type EOF are used in high voltage networks within the 24 245 kv range. They

More information

LP Spare parts list. Duplex roller. s/n BGF Engine: Hatz 1D Construction Tools EOOD No

LP Spare parts list. Duplex roller. s/n BGF Engine: Hatz 1D Construction Tools EOOD No LP 7505 Spare parts list Duplex roller s/n BGF000001- Engine: Hatz 1D 50 2015 Construction Tools EOOD No. 9800174901 2015-12 F1700C Spare parts list General information This spare parts list applies to

More information

01/11 LIBRETTO RICAMBI DAYTONA 2WD

01/11 LIBRETTO RICAMBI DAYTONA 2WD 01/11 LIBRETTO RICAMBI DAYTONA 2WD GRUPPO TRASMISSIONE TAV - 1 GRUPPO TRASMISSIONE TAV - 1 Pos. Q.tà Codice Denominazione Pos. Q.tà Codice Denominazione 1 N000482003 20 HP Engine Vanguard V-TWIN 23 N311129515

More information

FRONT BUMPER FORD F150 ECO-SERIES PART # FD-19336

FRONT BUMPER FORD F150 ECO-SERIES PART # FD-19336 15-16 FORD F150 ECO-SERIES PART # FD-19336 Body Armor 4x4 272 Corporate Terrace St. Corona, CA 92879 951-808-0750 Customer Service hours: M-TH: 7:30am to 4:30 PM Pacific Time Friday: 8 AM Noon Pacific

More information

RUBBER BELLOWS TYPE 1A & 1S SERIES

RUBBER BELLOWS TYPE 1A & 1S SERIES RUBBER BELLOWS TYPE 1A & 1S SERIES Description: Vibracoustics Ltd Reiflexa Bellows are made from various elastomers reinforced with high tensile textile or steel cords to provide the flexible elements

More information

RECOMMENDED SCREW PUMP SPECIFICATION

RECOMMENDED SCREW PUMP SPECIFICATION RECOMMENDED SCREW PUMP SPECIFICATION SECTION OPEN SCREW PUMP PART 1 GENERAL 1.01 SUMMARY A. Section Includes: Open screw pump assemblies and appurtenances. B. Related Sections: 1. Section - FRP Screw Pump

More information

1 of 8 1/17/2017 8:18 AM

1 of 8 1/17/2017 8:18 AM Timing Belt Service and Repair, Removal and Replacement: Replacing... http://repair.alldata.com/alldata/article/display.action?componentid=64&... 1 of 8 1/17/2017 8:18 AM Replacing the timing belt Special

More information

heet: 1 of 22 Backlash-free, torsionally stiff and maintenance-free coupling Type with setscrew Type with clamping hubs Type KN (Taper hubs) Type M with setscrew Type M with clamping hubs Type PI 11-3379-883

More information

WAKEFIELD THERMAL SOLUTIONS ASSEMBLY PROCEDURE FOR PRECISION COMPRESSION MOUNTING CLAMP SYSTEMS

WAKEFIELD THERMAL SOLUTIONS ASSEMBLY PROCEDURE FOR PRECISION COMPRESSION MOUNTING CLAMP SYSTEMS WAKEFIELD THERMAL SOLUTIONS ASSEMBLY PROCEDURE FOR PRECISION COMPRESSION MOUNTING CLAMP SYSTEMS Clamp Assembly Application Procedure All illustrations assume the following parts: 143 series crossbar, 143-2

More information

EXPANSION JOINT SELECTION GUIDE

EXPANSION JOINT SELECTION GUIDE EXPANSION JOINT SELECTION GUIDE The proper selection and application of an expansion joint is the determining factor in its operation and life. Improper selection and application will lead to problems

More information

Par ts Manual. Scissor Lifts. Installation Instructions. Pipe Cradle. Assembly, Installation & Operation. Serial Number Range

Par ts Manual. Scissor Lifts. Installation Instructions. Pipe Cradle. Assembly, Installation & Operation. Serial Number Range Par ts Manual Cradle Assembly, Installation & Operation Serial Number Range Scissor Lifts Part No. 72830GT Rev E Information Important Read, understand and obey the safety rules and all instructions before

More information

Deuce/Ace Installation Instructions

Deuce/Ace Installation Instructions HARDWARE KIT: Upper Mounting Plate: 2-7/16" (11mm) X 3.5" bolts 2-7/16" flange nuts 2-2" spacers 2-7/16" trim cap mounting washers 2 - plastic trim caps TOOLS NEEDED: safety glasses wrenches 16mm or 5/8"

More information

K760 Cut-n-Break. Reservdelar Spare parts Ersatzteile Pieces de rechange Piezas de repuesto Ricambi Peças sobresselente

K760 Cut-n-Break. Reservdelar Spare parts Ersatzteile Pieces de rechange Piezas de repuesto Ricambi Peças sobresselente IPL, K760 Cut-n-Break, 2009-, 575 66 02-0 K760 Cut-n-Break Reservdelar Spare parts Ersatzteile Pieces de rechange Piezas de repuesto Ricambi Peças sobresselente 575 66 02-0 HUSQVARNA CONSTRUCTION PRODUCTS

More information

DURA Flexball -Remote Controls

DURA Flexball -Remote Controls 1 DURA Flexball -Remote Controls Synthetic covering made from Dytron (TPE green) for protection against exposure, water splashes and other foreign bodies Flexible Steel Pipe Half-rounded rails Ball bearing

More information

SPARE PARTS EXPLODED VIEW GAS WALL BOILERS

SPARE PARTS EXPLODED VIEW GAS WALL BOILERS SPARE PARTS EXPLODED VIEW GAS WALL BOILERS Model GENUS 27 BFFI PLUS Edition 4 Current from Serial No: 2320317800001 to: ------------------ Add to Edition 3 1 71 70 9 8 7 5 9 3 4 3 5 7 5 1 2 1 8 9 120 0

More information

Yukon Trail Inc PARTS MANUAL. ELECTRIC 4x4 HUNTING VEHICLE

Yukon Trail Inc PARTS MANUAL. ELECTRIC 4x4 HUNTING VEHICLE Yukon Trail Inc PARTS MANUAL ELECTRIC 4x4 HUNTING VEHICLE CONTENT Part 1 Body 1-1 Front Cover 2 1-2 Instrument Board 3-4 1-3 Rear Cover 5-6 1-4 Rear Bumper 7 1-5 Windshield 8 1-6 Front Basket 9 1-7 Brush

More information

STEVI 440 / 441. Straight through control valve DN

STEVI 440 / 441. Straight through control valve DN with electric and pneumatic actuators Straight through control valve DN 15-100 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices available, e.g.

More information

Installation Instructions

Installation Instructions Installation Instructions TrailView Soft Top Important Safety Information For proper installation and best possible fit, please read all instructions BEFORE you begin. Periodically check all components

More information

SeeSnake. Regular Push Cable. Video Inspection Equipment. Ridge Tool Company/Elyria, Ohio, U.S.A.

SeeSnake. Regular Push Cable. Video Inspection Equipment. Ridge Tool Company/Elyria, Ohio, U.S.A. Regular Push Cable 0 0 0 O-Ring () Locking Sleeve Safe Ring Safety Cable () Back Up Ring Camera Whip Compression Nut Back Up Ring O-Ring 0 Spring Sleeve Cap O-Ring 0 Wire Sleeve 0 Push Bond O-Ring () Push

More information

Product Brochure For K058. Description. Features. Auckland: (09)

Product Brochure For K058. Description. Features. Auckland: (09) HG-3206 & PB-135B - Hydraulic NC Guillotine & NC Pressbrake Package Deal Guillotine - 3200 x 6mm, Pressbrake 3200mm x 135 Ton Ezy-Set NC-89 & Estun NC-E21 Controls Package Deal Ex GST Inc GST $65,900.00

More information

SPARE PARTS LIST (MX/8 - MX/10) 7$%/(125($53$57

SPARE PARTS LIST (MX/8 - MX/10) 7$%/(125($53$57 63$5(3$576/,67 0;0; 0303 7$%/(125($53$57 7$%/(125($53$57 7$%/(125($53$57 7$%/(125($53$57 7$%/(125($53$57,7(0 4W\ 4W\ 3$5712 '(6&5,37,21 127( 0; 0; 1 2 2 210.890 HEAD 2 2 2 210.932 CYLINDER BRACKET 3 9

More information

SECOND ROW SEAT BELT SECOND ROW SEAT BELT. Second Row Seat Belt SB-13 EXPLODED VIEW SEAT BELT RETRACTOR < REMOVAL AND INSTALLATION >

SECOND ROW SEAT BELT SECOND ROW SEAT BELT. Second Row Seat Belt SB-13 EXPLODED VIEW SEAT BELT RETRACTOR < REMOVAL AND INSTALLATION > SECOND ROW SEAT BELT Second Row Seat Belt EXPLODED VIEW SECOND ROW SEAT BELT INFOID:0000000012551454 A B C D E F G SB I J K L M N O AWHIA0861ZZ P 1. Seat belt height adjuster (LH/RH) 2. Seat belt retractor

More information

Series 240 Pneumatic On-off Valve Type 3351

Series 240 Pneumatic On-off Valve Type 3351 Series 240 Pneumatic On-off Valve Type 3351 Application Control valve with a tight shutoff of liquids, gases and steam in accordance with DIN or ANSI standards Nominal sizes DN 15 to 100 NPS ½ to 4 Nominal

More information

INSTALLATION INSTRUCTIONS PART#: SR-DOR SPARTAN RUNNING BOARD DODGE SPRINTER (FULL SIZE) FREIGHTLINER SPRINTER (FULL SIZE) 10-16

INSTALLATION INSTRUCTIONS PART#: SR-DOR SPARTAN RUNNING BOARD DODGE SPRINTER (FULL SIZE) FREIGHTLINER SPRINTER (FULL SIZE) 10-16 INSTALLATION INSTRUCTIONS PART#: SR-DOR353296 07-09 DODGE SPRINTER (FULL SIZE) 07-16 FREIGHTLINER SPRINTER (FULL SIZE) 10-16 MERCEDES-BENZ SPRINTER (FULL SIZE) PARTS LIST: 1 Driver/left Spartan Running

More information

Spring hangers, spring supports

Spring hangers, spring supports Spring hangers, spring supports 2 spring Spring hangers, supports PRODUCT 2 GROUP Spring hangers, spring supports Contents Page Field of application...2.1 Overview of spring hangers and spring supports...2.3

More information

Purlins and Girts. A division of Canam Group

Purlins and Girts. A division of Canam Group Purlins and Girts A division of Canam Group TABLE OF CONTENTS OUR SOLUTIONS AND SERVICES............................................................ 5 Cautionary statement..................................................................

More information

VALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS

VALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS The S1 model is self-operated bellows sealed pressure excess valve. This series of

More information

Fitting instructions for all. SitaAttika roof outlets and accessoires

Fitting instructions for all. SitaAttika roof outlets and accessoires s for all SitaAttika roof outlets and accessoires Contents General information 3 1. SitaTurbo Facade breakthrough.. 4 2. SitaTurbo Steam vapour barrier plate.. 5 3. SitaTurbo Steam vapour barrier flex..

More information

Industrial, Heavy Insulated Mono-Tape. and Duo-Tape

Industrial, Heavy Insulated Mono-Tape. and Duo-Tape Industrial, Heavy Insulated Mono-Tape and Duo-Tape Description: HTS/Amptek AWD and AWM Heating Tapes are Single and Double Duo-Tapes designed for use in high temperature applications. AWD and AWM Heating

More information

W 0 / TRD 100 PISTON VALVES YVN - YVNB YVMN - YVSN T E Phone: Fax:

W 0 / TRD 100 PISTON VALVES YVN - YVNB YVMN - YVSN T E Phone: Fax: 00 W 0 / TRD 0 PISTON VALVES YVN - YVNB YVMN - YVSN S T E 01-0 Phone:+0 1 0 7 50 Fax: +0 1 77 01 YAKACIK Piston Valves YAKACIK VALF having long term experience on elastic sealing systems, designed piston

More information

STEVI 440 / 441. Straight through control valve DN

STEVI 440 / 441. Straight through control valve DN with electric and pneumatic actuators Straight through control valve DN 15-100 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices available, e.g.

More information

pharmaceutical petrochemical industries The new Hygienic range Clean design, easy to clean

pharmaceutical petrochemical industries The new Hygienic range Clean design, easy to clean 7 The new Hygienic range Clean design, easy to clean The Hygienic line is born to help prevent bacterical contamination of products being processed in the production lines where IRINOX enclosures are used,

More information

Inductive voltage transformers

Inductive voltage transformers Inductive voltage transformers Outdoor operation Oil-paper insulated EOF (24 245) kv General description Voltage transformers type EOF are used in high voltage networks within the 24 245 kv range. They

More information