CAR AND TRUCK BALANCER

Transcription

1 CAR AND TRUCK BALANCER J CONE J cone for Japanese cars (to be used with WD Spacer). 40FF53534 Car and Light Truck ( mm) Wheels must be mounted with the cone from the inside and locking from the outside using the pressure cup. To be used with WD Spacer and with the small plastic ring between hub and cone to increase the spring pressure. VL/2 CONE VL/2 cone for light trucks and SUV s. 40FF (97-180mm) Wheels must be mounted with this cone from the outside. It may need to be used with the G40 spacer ring on the hub. 16

2 CAR AND TRUCK BALANCER 8.5 SUPER CONE Cone for GMC 6500 series & International using 19.5 rims. Must be used with 3-Piece Truck Cone Kit. 40FF ( mm) Wheels must be mounted with this cone from the outside. It needs to be used with the 3-Piece Truck Cone Kit. G40 RING G40 spacer disc. 40FF43745 Any balancer (except K22) Spacer must be mounted on the hub, while locking the wheel with the cone from the outside. 17

3 CAR AND TRUCK BALANCER GG RING GG Spacer disc Any balancer (except K22) Spacer must be mounted on the hub, while locking the wheel with the cone from the outside. GG spacer can be mounted either way, to fit the inside rim shape. 2-PIECE TRUCK CONE KIT 2-piece truck cone kit: VL/2 cone + G40 spacer ring. Kit for light trucks and SUV s. 41FF ( mm) G40 spacer must be mounted on the hub, while locking the wheel with the VL/2 cone from the outside. 40FF ( mm) 40FF

4 CAR AND TRUCK BALANCER 3-PIECE TRUCK CONE KIT 2 piece truck cone kit + GG spacer ring to fit dually wheels, Ford F-350, 450 and FF53550 G40 and GG spacers must be mounted on the hub, while locking the wheel with the VL/2 cone from the outside. GG spacer can be mounted either way, to fit the inside rim shape. 4-PIECE TRUCK CONE KIT 3 piece truck cone kit Super cone to fit FF43748K 40FF ( mm) ( mm) 40FF ( mm) G40 and GG spacers must be mounted on the hub, while locking the wheel with the cone from the outside. GG spacer can be mounted either way, to fit the inside rim shape. 40FF FF ( mm) 40FF ( mm)

5 TRUCK BALANCER STANDARD KIT UC 215HW MANUAL LOCKING STANDARD KIT For wheel with central hole of Ø (Ø43-221mm). Made up of 4 cones, a spacer ring and a lock nut with handwheel. Standard kit on C206, C212 and C FF ( mm) Wheels must be mounted with the cone from the outside and the right spacer mounted on the hub. STANDARD KIT FOR C206 - C212 - C218 41FF FF FF FF (79-110mm) 40FF FF (60-81mm) FF (43-69mm) FF FF FF ( mm) 41FFA FF (97-170mm)

6 TRUCK BALANCER SR 215/2 STAR ADAPTORS KIT To center lug centric wheels with 8 holes and 10 holes. They are supplied with two spiders and a pre-centering ring. 41FF67879 Wheels must be mounted with the star adaptor from the outside and the spacer mounted on the hub. 40FF FF67880 s (Lug centric) BOLT PATTERN 10.8 / / 13.2 (Ø275 / / 335 mm) 40FF FF FF67883 CONE 5 To center European truck or bus wheels with a center hole of Ø 11 (Ø 281 mm) by means of cones. 40FF (281 mm) Wheels must be mounted with the cone from the outside and the GG and G40 spacers mounted on the hub. 21

7 TRUCK BALANCER 22.5 DAYTON ADAPTOR Wheel adaptor for Dayton wheels FF37124 Lock the wheel on this adaptor and then lock on the shaft using the wing nut. 20 and 22.5 (508 and mm) 24.5 DAYTON ADAPTOR Wheel adaptor for Dayton wheels FF and 24.5 (559 and 622 mm) Lock the wheel on this adaptor and then lock on the shaft using the wing nut. 22

8 TRUCK BALANCER G40 STEEL WINGNUT Steel wing nut with extended wings usable as alternative to the standard wing nut. Allows a greater tightening torque. 40FF G40 STEEL WINGNUT Steel wing nut with extended wings usable as alternative to the standard wing nut. Allows a greater tightening torque. 40FF

9 TRUCK BALANCER GL40 CAR KIT Quicknut kit for car wheels. Kit made up of a nut, two plastic cups with rubber rings to protect alloy rims and a plastic ring. I DO NOT USE ANY QUICK NUT WITH TRUCK WHEELS. 41FF FF83148 Car and Light Truck If possible, wheels must be mounted with the cone from the inside and locking from the outside using the pressure cup or ring. Make sure you have enough spring pressure on the cone, otherwise place the small plastic ring between spring and cone to increase it. 41FF FF FF FF FF FF FF79260 ACCESSORY RACK Storage accessory rack for truck adaptors (Standard with C218). 41FF

10 C202SE BALANCER STANDARD KIT C202 STD KIT PNEUMATIC LOCKING STANDARD KIT Pneumatic sleeve with reverse mounting cup and no-mar ring, 4 cones, 2 spacer rings, rim width gauge and weight pliers. For wheels with central hole of Ø3-8.7 (Ø76-221mm). C202SE Pneumatic 60mm (76-221mm) 10.8 / / 13.2 (Ø275 / / 335 mm) If possible, wheels must be mounted with the cone from the inside and locking from the outside using the pressure cup or ring. Make sure you have enough spring pressure on the cone, otherwise place the small plastic ring between spring and cone to increase it. STANDARD KIT FOR C202SE 41FF ( mm) 40FF ( mm) (76-106mm) ( mm) FF FF FF FF FF FF FF67883