Part No. AJS & MATCHLESS WHEELS & BRAKES - NEW PARTS Price (incl 17.5% VAT)

Transcription

1 Part No. AJS & MATCHLESS WHEELS & BRAKES - NEW PARTS Price (incl 17.5% VAT) Price (excl VAT) Michelin Inner Tube, 3.25/3.50/4.10 x 18" Michelin Inner Tube, 3.25/3.50 x 19" Michelin Inner Tube, 2.75/3.00/3.25 x 21" Michelin Inner Tube, Heavyduty Motocross, 18" Michelin Inner Tube, Heavyduty Motocross, 19" Michelin Inner Tube, Heavyduty Motocross, 21" Avon Speedmaster Mk2 ribbed front tyre, 19" x Metal dust cap for valve with valve key " rim tape " rim tape " rim tape " rim tape Security bolt for WM1 rim/ tyre Security bolt for WM2 rim/ tyre G3L-H Security bolt for WM3 rim/ tyre " tyre lever Rubber grommet for hub disc * Front Wheel Front wheel spindle assembly, modified, (& 63 CSR) Oil sealing ring for front hub bearings G3L-H Cup for front hub bearing oil seal. Also use instead of cup (11911) Ring, spring, locating front hub bearings Adjusting ring for hub bearing, pre-1954 all models (& 1959-on C models) Nut, lock, for hub bearing adjusting ring, pre-1954 all models (& 1959-on C models) / front spindle nut & washer Nut, outside, securing front brake cover plate, Nut, outside, securing front brake cover plate, (& 63 CSR) G12M-H47 Nut locating front brake cover plate, Nut locating front brake cover plate, Front hub bearing adjuster, (& 1963 CSR only) Lock nut for front hub bearing adjuster, (& 1963 CSR only) Bearing, 'interim' front wheel, 1963 all models except CSR & C on CS single & P Oil seal, 'interim' front wheel, 1963 all models except CSR & C on CS single & P Oil seal, 'interim' front wheel, 1963 all models except CSR & C on CS single & P Dust cover disc, 'interim' front wheel, 1963 all models except CSR on CS single & P11 only Front wheel spindle, 1964-on Norton-type wheels E4768 Front wheel spindle nut, 1964-on Norton-type wheels Front wheel bearing right side, 1964-on except CS & C Front wheel bearing left side, 1964-on except CS & C Spacer for bearing, 1964-on Norton-type wheels E6888 Ring locking bearing, 1964-on Norton-type wheels E6885 Felt washer for hub bearing, 1964-on Norton-type wheels E6889 Washer, retaining felt, Norton front wheel Washer, oil retaining, Norton front wheel Dust cover, Norton front wheel

2 Front hub bearing, Lightweights, except CSR Front hub bearing, Lightweight CSR * Rear Wheel Bearing, roller, for rear hub. Modified taper roller bearings, straight replacement for originals (pair) Oil sealing ring for rear hub bearings, rigid models G3L-H Oil sealing ring for rear hub bearings Cup for rear hub bearing oil seal, rigid models - use instead of cup (11911) Cup for rear hub bearing oil seal, 1949-on. Also use instead of cup (010741) Spacer on spindle for oil seals, 1955-on full-width wheels Adjusting ring for hub bearing, pre-1950 all models (& 1959-on C models) Nut, lock, for hub bearing adjusting ring, pre-1950 all models (& 1959-on C models) Ring, spring, locating rear hub bearings, rigid models Ring, spring, locating rear hub bearings, spring frame & rigid models G3L-H4-A Rear spindle, solid, with nuts & washers, 41-G3L-H4-A, G3L-H106 Spacer, rear wheel spindle, next to cover plate, G3L-B54 Spacer, rear wheel spindle, fork end, G3L-H26S Spacer, rear wheel spindle, for speedometer gearbox, rigid frame only Rear spindle, solid, with nuts & washers, Spacer, rear wheel spindle, next to cover plate, Spacer, rear wheel spindle, fork end, H18 Lock washer for sprocket retaining nut, all models, rigid models only Lock washer for sprocket retaining nut, 1950 spring frame models only & all models H17 Bolt retaining sprocket to rear hub, for half-width wheels Nut retaining sprocket to rear hub, for half-width wheels Rear spindle, solid, spring frame models Nut for centre solid spindle, spring frame only, 1951-on all HW models Cam on rear wheel solid spindle, right side, spring frame models Cam on rear wheel solid spindle, left side, spring frame models Key on rear wheel spindle locating cam adjusters, spring frames Nut locking speedo gearbox, cam adjuster type, spring frame models Collar, on rear wheel solid spindle (abuts against fork end), spring frames only Sprocket/brake drum for rear wheel, solid driving pin Quickly-Detachable type Nut, lock, rear wheel sprocket bolt or driving pin, /16" type (nyloc) Nut, lock, rear wheel sprocket bolt or driving pin, 1957-on ⅜" type (nyloc) Ring retaining rear hub bearing, large. Also use instead of (010742) Rear spindle, solid, with nut & washer, , suitable for QD and non-qd wheels Washer for rear wheel centre solid spindle, 1955-on Ring retaining rear hub bearing, small Adjuster for rear hub bearings, 1955-on Lock nut, hub bearing adjuster

3 Spacer, for spindle nut, pre-1963 non-qd wheels, 1963 CS & CSR only, 1964-on CS single only Spacer, rear wheel spindle (abuts against fork end speedo side), Spacer, rear wheel spindle (abuts against fork end speedo side), 1963 CS & CSR, 1964-on CS singles only Spacer, for cover plate, outer. Also use for spacer (021606) Spacer, for rear brake cover plate, inner, 1963 CS & CSR only, 1964-on CS singles only Spacer, for cover plate, inner, QD wheels only Nut for rear brake drum dummy spindle, QD wheels Washer, rear brake drum dummy spindle nut, QD wheels. NB only fitted if stop light switch bracket not fitted Ball bearing for Quickly Detachable brake drum Oil seal for QD brake drum bearing Circlip for QD brake drum bearing Bush on rear wheel spindle for speedo gearbox, Nut locking speedo gearbox, Nut locking speedo gearbox, 1962-on, except Norton-type wheels Oil seal, 'interim' rear wheel, 1963 all models except CSR, CS & C Speedo gearbox, Smiths BG5330 pattern, 2:1 ratio, suits all Heavyweights Speedo gearbox, Smiths BG5330 pattern, 2:1 ratio, suits 1964-on Norton-type wheels & Lightweights Washer outside speedo gearbox Rear hub bearing, AJS 7R Rear hub roller bearing, AJS 7R Rear hub bearing right side, 1964-on Norton-type wheels Rear hub bearing left side, 1964-on Norton-type wheels E6885 Felt washer for hub bearing, 1964-on Norton-type wheels E6889 Washer, hub bearing, Norton rear wheel Washer retaining felt washer, Norton rear wheel Cover disc for hub, Norton rear wheel Screw for hub cover disc, Norton rear wheel Grommet for hub cover disc, Norton rear wheel Nut for rear spindle, Norton wheels Washer for spindle, Norton wheels Sprocket/brake drum for Norton-type rear wheel, takes cycle thread sleeve nuts U Sleeve nut for sprocket/brake drum stud, UNF thread Sleeve nut for sprocket/brake drum stud, Cycle thread for original sprockets Spacer, speedo gearbox, Norton wheels * Rear Chains Chain, rear, 90 links, rigid competition models (genuine ones only with short rear frame) Chain, rear, 91 links, Chain, rear, 94 links Chain, rear, 96 links Chain, rear, 97 links Chain, rear, 98 links Chain, rear, 99 links Chain, rear, 123 links, Lightweight 350cc & 1962-on 250cc models (except CSR) Chain, rear, 124 links, 1962-on Lightweight CSR models Chain, rear, 125 links, Pre-1962 Lightweight 250cc Connecting link for ½" rear chain, Lightweight models (comes with spring clip) Connecting link for ⅝" rear chain, Heavyweight models (comes with spring clip) Cranked link for ½" rear chain, Lightweight models Cranked link for ⅝" rear chain, Heavyweight models * Brake Shoes * All relined brake shoes come without thrust pin, so these should be removed before exchanging

4 41-12-B71 Relined brake shoes, all models & 1959-on C, exchange only (pair). Steel type with castellated thrust collar or alloy type with thrust pin Relined brake shoes, , exchange (pair) Relined brake shoes, , buy (pair) Relined brake shoes, 1963 all road models except CSR, 1964-on CS front only & P11 front & rear, exchange only (pair) New Ferodo front brake shoes, 1964-on Norton-type wheels, buy (pair) New Ferodo rear brake shoes, 1964-on Norton-type wheels, buy (pair) E5832 Spring, Norton-type brake shoe Relined brake shoes, Lightweight, exchange only (pair) Relined brake shoes, Lightweight CSR front, exchange only (pair) Packing washer for brake shoe thrust pin; washer for brake expander lever Rivets for brake cover plates (set of 6) * Front Brake Front brake anchor stay/torque arm, Front brake anchor stay/torque arm, i Front brake anchor stay/torque arm with bulbous end for 'interim' hub, 1963 all models except C & CSR, 1963-on CS singles & P Bolt fixing anchor stay to front cover plate Shakeproof washer for anchor stay bolt, external teeth Screw, countersunk, securing front brake shoe fulcrim pin, 1956-on Front brake yoke with clevis pin, & Lightweight, chrome Clevis pin with split pin * Rear Brake Rear brake cover plate & rivets, , chrome on brass Spacer, outer, for rear brake cover plate, (NOS) Bolt anchoring rear brake cover plate, with nut & washer, rigid models B Bolt anchoring rear brake cover plate, with nut & washer, pre-1955 spring frame models Bush for rear brake foot pedal, spring frame models G3-B2 Spindle/bolt fixing rear brake foot pedal, rigid models Fulcrum for rear brake foot pedal, 1955-on Spring, return, rear brake foot pedal, 1955-on Spring, return, rear brake foot pedal, rigid models G3-B Spring, return, rear brake foot pedal, spring frame models Bolt securing rear brake foot pedal, 1956-on. Also replaces bolt (no nut (021713) required) Stop, rear brake foot pedal, 1956-on Rear brake rod, 19", & , except CS Rear brake rod, 19¾", 1949 & 1955 road models only, chrome Rear brake rod, 21", CS models, black painted Rear brake rod, 18¼", 1956-on (except 1963 road models with interim rear wheel), black painted Rear brake rod, 18", 1963 road models with interim rear wheel (NOS) Lightweight brake rod Washer for brake rod (retains spring) End yoke for brake rod with clevis pin, , chrome End yoke for brake rod with clevis pin, 1957-on, chrome Rear brake rod adjusting nut, large, , chrome Rear brake rod adjusting nut, small, 1956-on, chrome Adjusting clip for rear end of brake rod, with clevis pin, , chrome Adjusting clip for front end of brake rod, with clevis pin, , chrome Roller for rear brake expander lever, 1964-on Norton-type wheels & Lightweight models Brake rod spring, , chrome

5 Clevis pin with split pin