The Right Fit. Product Catalog for Micro Filter

Transcription

1 The Right Fit Product Catalog for Micro Filter

2 Innovative Ideas, Fresh solutions CONTENTS Pleated Cartridge Filter 1 Flomax(PP) 8 G/F(Glass) 11 Sumax(Polysulfone) 15 Nymax(Nylon) 18 Fluoromax(PTFE) Special Section 26 Flomax 3 Capsule 36 Mini Depth & Wound Type Bag filter 39 DP/DT 4 DL/DE 41 DB 42 DJ 43 WOUND (WP/WC/WS) 44 Disc Cartridge Filter 45 Bag Filter(Ring & Flange/Oil Magnet) Filter Housing 48 Filter Housing 49 PVC Housing for HV type 5 PP Housing for UHV type 51 NEW PFA Housing 52 Chemical Compatibility

3 Pleated Cartridge Filter Flomax(PP) G/F(Glass) Sumax(Polysulfone) Nymax(Nylon) Fluoromax(PTFE) Melt Blown Fine & Nano Media

4 Pleated Cartridge Filter Flomax (PP) Description Flomax 1% polypropylene media & support construction offers excellent chemical and heat resistance. All polypropylene components and thermal bonded manufacturing enable the smallest contaminant extraction and higher durability Flomax filter series are manufactured in an ISO 91 quality systems standard registered clean-room facility. Application Electronics : LCD, PDP, OLED, Rinse Solution, Electronic, MLCC Chemicals : Fine Chemicals, Solvent, Selected Acids & Bases, Paste, Ink, etc Semi-conductor : CMP Slurry Food & Beverage: Beer, Flavors, Juices, Drinking Water, Syrup, Wines, Tea Feature & Benefits Longer life cycle & cost reduction Multiple layered micro-porous construction ensures consistent filtration performance Various micron range Specifications Configuration Operating Conditions TYPE Removal rage (um) Media Support/Drainage Core/Cage Sealing Length (inch) ID (mm) OD (mm) Differential Pressure PP Pleated Filter.2 ~ 9 um Thermal bonding 1 / 2 / 3 / 4 3 / 42 / 55 / / 83 / 13 / 158 Max.

5 Flomax(PP) G/F(Glass) Sumax(Polysulfone) Nymax(Nylon) Fluoromax(PTFE) 2 3 (mm) Standard-H High Volume-HV Ultra High Volume-UHV Jumbo-J *Dimensions of other end-cap type are on appendix Dimension A, B C D E F M

6 Pleated Cartridge Filter PO Description PO cartridge series are well-suited for a broad range of fine particle and prefiltration applications where purity, economy and reliability are critical lpm 8 lpm 1 5 lpm 6 PO25 4 PO6 2 PO2 psid PO PO6 2 PO2 psid PO PO12 1 psid Ordering information H HV UHV Grade Type Media Support Micron Rating End-cap Option Length O-ring Special option E: Electronic Pharmaceutical F: Food & Beverage Blank: Others H: Standard PO: High Performance PP Grade Polypropy lene 2:.2um 4 :.45um 6:.6um 12: 1.2um 25: 2.5um 45: 4.5um 6: 6.um 11: 1.um 22: 2.um 33: 3.um 55: 5.um A: 25mm DOE B: 254mm DOE C: O-ring D: O-ring E: O-ring /Fin End F: O-ring /Fin End M: O-ring 1: 1 2: 2 3: 3 4: 4 E: EPDM N: Buna-N S: Silicone V: Viton T: TEV C: DI cleaning V: Vacuum Package S: SUS ring Insertion V: High Volume U: Ultra High Volume 12: 1.2um 25: 2.5um 45: 4.5um 11: 1.um 22: 2.um 33: 3.um 55: 5.um D: O-ring M: O-ring K: 334 O-ring 1: 1 1: 1 E: EPDM T: TEV C: DI cleaning V: Vacuum Package J: Jumbo H: Pleated 2:.2um 11: 1.um 22: 2.um 33: 3.um 55: 5.um H: Horizontal non-core type V: Vertical non-core type 1: 1 2: 2 4: 4 6: 6 E: EPDM N: Buna-N S: Silicone V: Viton

7 Flomax(PP) G/F(Glass) Sumax(Polysulfone) Nymax(Nylon) Fluoromax(PTFE) 4 5 CO Description CO cartridge series are provided long lifecycle and are available in a wide selection of micron rating to meet client's filtration requirement. Nominal retention ratings which, in combination with an integral, multilayer construction, offer outstanding filtration performance. lpm 3 CO12 2 CO6 1 CO3 psid Ordering information H lpm 3 CO12 2 CO6 1 CO3 psid HV lpm 3 2 CO12 1 psid UHV Grade Type Media Support Micron Rating End-cap Option Length O-ring Special option E: Electronic Pharmaceutical F: Food & Beverage Blank: Others H: Pleated CO: High Performance PP Grade Polypropy lene 3:.3um 6:.6um 12: 1.2um 25: 2.5um 5: 5.um 22: 2.um 33: 3.um 55: 5.um A: 25mm DOE B: 254mm DOE C: O-ring D: O-ring E: O-ring /Fin End F: O-ring /Fin End M: O-ring 1: 1 2: 2 3: 3 4: 4 E: EPDM N: Buna-N S: Silicone V: Viton T: TEV C: DI cleaning V: Vacuum Package S: SUS ring Insertion V: High Volume U: Ultra High Volume 12: 1.2um 25: 2.5um 5: 5.um 33: 3.um 55: 5.um D: O-ring M: O-ring 1: 1 K: 334 O-ring 1: 1 E: EPDM T: TEV C: DI cleaning V: Vacuum Package

8 Pleated Cartridge Filter PL Description PL cartridge series offer long performance compared to PO Series due to their multiple layered construction lpm 2.um 5.um Differential pressure(psid) um gpm Ordering information Grade Type Media Support Micron Rating End-cap Option Length O-ring Special option E: Electronic Pharmaceutical F: Food & Beverage Blank: Others H: Pleated V: High Volume U: Ultra High Volume PL: Long Performance PP Grade Polypropy lene 12: 1.2um 2: 2.um 3: 3.um 45: 4.5um 11: 1.um 22: 2.um 33: 3.um 55: 5.um 99: 9.um 1H: 1.um 2: 2.um 45: 4.5um 11: 1.um 1H: 1.um 2: 2.um 45: 4.5um 11: 1.um 22: 2.um 33: 3.um 55: 5.um 1H: 1.um A: 25mm DOE B: 254mm DOE C: O-ring /Fin End D: O-ring /Fin End E: O-ring /Fin End F: O-ring /Fin End M: O-ring /Fin End D: O-ring M: O-ring K: 334 O-ring 1: 1 2: 2 3: 3 4: 4 1: 1 1: 1 E: EPDM N: Buna-N S: Silicone V: Viton T: TEV E: EPDM T: TEV C: DI cleaning V: Vacuum Package S: SUS ring Insertion C: DI cleaning V: Vacuum Package J: Jumbo H: Pleated 6:.6um 12: 1.2um 45: 4.5um 11: 1.um 22: 2.um 33: 3.um H: Horizontal non-core type V: Vertical non-core type 2: 2 3: 3 4: 4 6: 6 E: EPDM N: Buna-N S: Silicone V: Viton

9 Flomax(PP) G/F(Glass) Sumax(Polysulfone) Nymax(Nylon) Fluoromax(PTFE) 6 7 PI Description PI cartridge series are produced by World-wide unique technology from the filter media to all the component parts High effective area, combined with continuously profiled pore structure minimizes differential pressure lpm PI5 PI12 PI2 PI45 PI psid Ordering information Grade Type Media Support Micron Rating End-cap Option Length O-ring Special option E: Electronic Pharmaceutical F: Food & Beverage Blank: Others H: Pleated PI: High Performance Improved Polypropy lene 5:.5um 12: 1.2um 2: 2.um 45: 4.5um 6: 6.um A: 25mm DOE B: 254mm DOE C: O-ring D: O-ring E: O-ring /Fin End F: O-ring /Fin End M: O-ring 1: 1 2: 2 3: 3 4: 4 E: EPDM N: Buna-N S: Silicone V: Viton T: TEV C: DI cleaning V: Vacuum Package S: SUS ring Insertion V: High Volume U: Ultra High Volume 12: 1.2um 2: 2.um 45: 4.5um 5:.5um 45: 4.5um D: O-ring M: O-ring K: 334 O-ring 1: 1 1: 1 E: EPDM T: TEV C: DI cleaning V: Vacuum Package J: Jumbo H: Pleated 12: 1.2um 2: 2.um 45: 4.5um 6: 6.um H: Horizontal non-core type V: Vertical non-core type 2: 2 3: 3 4: 4 6: 6 E: EPDM N: Buna-N S: Silicone V: Viton

10 Pleated Cartridge Filter Flomax(PP) G/F(Glass) Sumax(Polysulfone) Nymax(Nylon) Fluoromax(PTFE)

11 Flomax(PP) G/F(Glass) Sumax(Polysulfone) Nymax(Nylon) Fluoromax(PTFE) 8 9 G/F (Glass) Description Constructed of high quality glass fiber media G/F cartridges are suited for high viscosity, flow process Binder-free borosilicate glass fiber has no added extractables Cartridges are sealed with thermal bonding process without the use of adhesives to ensure lowest extractables. Application Preferred for prefiltration of viscous solutions. Excellent prefilters for solutions with a heavy load of large-sized particulate that must be removed. Feature & Benefits Manufactured of the highest quality borosilicate glass microfibers. Quality raw materials and precise manufacturing ensure repeatable performance. Specifications Configuration Operating Conditions TYPE Removal rage (um) Media Support/Drainage Core/Cage Sealing Length (inch) ID (mm) OD (mm) Differential Pressure Temperature Glass Fiber Pleated Filter Borosilicate microfiber glass with acrylic binder Thermal bonding 1 / 2 / 3 / Max. 25 C Max. 8 2.bar

12 Pleated Cartridge Filter Flow rate Clean pressure drop (kpa) Flow Rate (LPM) SEM X5 Surface Ordering information Grade Type Media Support Micron Rating End-cap Option Length O-ring Special option E: Electronic Pharmaceutical F: Food & Beverage Blank: Others H: Pleated PG: Glass Fiber Polypropy lene 5:.5um 1: 1.um 15: 1.5um A: 25mm DOE B: 254mm DOE C: O-ring D: O-ring E: O-ring /Fin End F: O-ring /Fin End M: 222 O-ring 1: 1 2: 2 3: 3 4: 4 E: EPDM N: Buna-N S: Silicone V: Viton T: TEV -

13 Pleated Cartridge Filter Flomax(PP) G/F(Glass) Sumax(Polysulfone) Nymax(Nylon) Fluoromax(PTFE)

14 Pleated Cartridge Filter Sumax (Polysulfone) Description Sumax cartridges are constructed of polysulfone micro-porous membrane and polypropylene support components enable superior durability and particle removal performance and can be used in various applications. Integrity tested after manufacturing using bubble point and air diffusion. Application DI-water, UPW, Winery, Brewery, Bio-process, Beverage Feature & Benefits Consistent filtration performance through controlled pore size. Thermal bonded manufacturing without adhesives media extraction. High porosity membrane construction Specification PES(SI/SO/SD) Media Hydropilic Polysulfone Support Core/Cage Diameter(mm) ID 3 / 42 / 55 OD 69 / 82 / 13 Length(inch) 1, 2, 3, 4 Temperature C (Max) 8 C Max. Pressure 7psi 25 C

15 Flomax(PP) G/F(Glass) Sumax(Polysulfone) Nymax(Nylon) Fluoromax(PTFE) (mm) Standard-H High Volume-HV Ultra High Volume-UHV Jumbo-J *Dimensions of other end-cap type are on appendix Dimension A, B C D E F M

16 Pleated Cartridge Filter Maximal chemical and PH desistence Compatible with most chemical solvents Optically clear when wet with water Clean pressure drop (kpa) Clean pressure drop (kpa) Clean pressure drop (kpa) Flow Rate (LPM) SD Flow Rate (LPM) SI Flow Rate (LPM) SO Ordering Information Grade Type Media Support Micron Rating End cap Option Length O-ring Special option E: Electronic Pharma - ceutical F : Food & Beverage Blank: Others H: Standard V: High Volume U: Ultra High Volume SD (Asymmetric) Polypropy Hydrophilic lene Polysulfone SI/SO (Symmetric) Hydrophilic Polysulfone 2:.2um 4 :.45um 6:.6um 1:.1um 2:.2um 4 :.45um 6:.6um 12: 1.2um 5: 5.um A: 25mm DOE B: 254mm DOE C: O-ring / Flat end D: O-ring / Flat end E: O-ring / Fin end F: O-ring / Fin end M: O-ring / Flat end D: O-ring M: O-ring 1: 1 2: 2 3: 3 4: 4 1: 1 E: EPDM N: Buna-N S: Silicone V: Viton T: TEV C: DI Cleaning & Vacuum Package V: Vacuum Package S: SUS ring Insertion C: DI cleaning V: Vacuum Package J: Jumbo H: Pleated 2:.2um 6:.6um H: Horizontal non-core type V: Vertical non-core type 2: 2 3: 3 4: 4 6: 6 E: EPDM N: Buna-N S: Silicone V: Viton

17 Pleated Cartridge Filter Flomax(PP) G/F(Glass) Sumax(Polysulfone) Nymax(Nylon) Fluoromax(PTFE)

18 Pleated Cartridge Filter Nymax (Nylon) Description Nymax has superior flow rate and efficiency maximizing the performance of the nylon66 media cartridge. The naturally hydrophilic Nylon 6,6 membrane in an all polypropylene construction, provides low extractable, increased filter life and superior contaminant removal as compared to other membrane cartridges. Nymax cartridge is suited for the area where high efficiency contaminant removal requied. Application Chemical delivery system, Photolithography, Etchants Developers, Strippers, DI-water High purity chemicals, Parts Cleaning, Solvents Feature & Benenfits Hydrophilic nylon66 cartridges will remove particles and microorganisms greater than.2um from gases and liquid. Each cartridge is integrity tested during manufacturing to guarantee filters performance. Thermal bonded manufacturing without adhesives. Enhanced contaminant removal capacity results in longer lifetime than competitive filter cartridges. Specification Nylon 66 Media Hydropilic Nylon 66 Support / HDPE Core/Cage / HDPE Diameter(mm) ID 3 OD 69 Length(inch) 1, 2, 3, 4 Temperature C (Max/Min) 8 C Max. Pressure 7psi 25 C

19 Flomax(PP) G/F(Glass) Sumax(Polysulfone) Nymax(Nylon) Fluoromax(PTFE) Flow rate lpm psid NI1 NI2 NI4 NI6 Flow rate SEM SEM Ordering Information Grade Type Media Support Micron Rating End-cap Option Length O-ring Special option E: Electronic Pharmaceutical F: Food & Beverage Blank: Others H: Standard NI: Hydrophilic Nylon 66 Polypropy lene 1:.1 um 2:.2 um 4:.45 um 6:.6 um A: 25mm DOE B: 254mm DOE C: O-ring / Flat end D: O-ring / Flat end E: O-ring / Fin end F: O-ring / Fin end M: O-ring / Flat end 1: 1 2: 2 3: 3 4: 4 E: EPDM N: Buna-N S: Silicone V: Viton T: TEV C: DI Cleaning & Vacuum Package V: Vacuum Package S: SUS ring Insertion

20 Pleated Cartridge Filter Flomax(PP) G/F(Glass) Sumax(Polysulfone) Nymax(Nylon) Fluoromax(PTFE) PTFE Cartridge for the wide chemical range & stability

21 Flomax(PP) G/F(Glass) Sumax(Polysulfone) Nymax(Nylon) Fluoromax(PTFE) Fluoromax (PTFE) Description Fluoromax has superior flow rate and high efficiency maximizing the performance with the Teflon media. Fluoromax is durable and effective filter designed for various industrial filtration applications. Fluoromax is designed for removal of contaminants from aggressive solvents, corrosive liquids, and gases. Application Electronics: Photo resists, wet chemical, solvents Pharmaceutical : Bacteria, Vaccines For high volume point-of-use filtration Feature & Benefits Available to remove low grade particles Thermal bonded manufacturing without adhesives Broad chemical compatibility Specification Diameter (mm) Media Support Core/Cage ID TIP(Hydropilic) TFP(Hydrophobic) TFT(All Teflon) Hydropilic PTFE Hydrophobic PTFE Hydrophobic PTFE Length(inch) 1, 2, 3, 4 1, 2, 3, 4 1, 2, 3 Temperature C (Max/Min) OD 69 / 82 / / 42 / 55 Max. Pressure 7psi 25 C 7psi 25 C 7psi 25 C PFA PFA 69 / 82 / / 83 15

22 Pleated Cartridge Filter (mm) Standard-H High Volume-HV Ultra High Volume-UHV *Dimensions of other end-cap type are on appendix Dimension A, B C D E F M

23 Flomax(PP) G/F(Glass) Sumax(Polysulfone) Nymax(Nylon) Fluoromax(PTFE) 2 21 Hydrophilic PTFE(TI) Cartridge Constructed of hydrophilic membrane Excellent chemical stability Compatible with most chemical solvents Clean pressure drop (kpa) Clean pressure drop (kpa) Clean pressure drop (MPa) Flow Rate (LPM) H Flow Rate (LPM) HV Flow Rate (LPM) UHV Ordering Information Grade Type Media Support Micron Rating End-cap Option Length O-ring Special option E: Electronic Pharmaceutical F: Food & Beverage Blank: Others H: Standard TI: Hydrophilic PTFE Polypropy lene 1:.1um 2:.2um 4 :.45um 1: 1.um 3: 3.um 11: 1.um A: 25mm DOE B: 254mm DOE C: O-ring D: O-ring E: O-ring /Fin End F: O-ring /Fin End M: O-ring 1: 1 2: 2 3: 3 4: 4 E: EPDM N: Buna-N S: Silicone V: Viton T: TEV C: DI Cleaning & Vacuum Package S: SUS ring Insertion V: High Volume 1:.1um 4 :.45um 1: 1.um 3: 3.um 11: 1.um D: O-ring M: O-ring 1: 1 C: DI cleaning V: Vacuum Package U: Ultra High Volume K: 334 O-ring 1: 1 E: EPDM T: TEV

24 Pleated Cartridge Filter Constructed of hydrophobic membrane Excellent chemical stability Compatible with most chemical solvents Clean pressure drop (kpa) Clean pressure drop (kpa) Clean pressure drop (MPa) Flow Rate (LPM) H Flow Rate (LPM) HV Flow Rate (LPM) UHV Ordering Information Grade Type Media Support Micron Rating End-cap Option Length O-ring Special option E: Electronic Pharmaceutical F: Food & Beverage Blank: Others H: Standard TF: Hydrophobic PTFE Polypropy lene A5:.5um 1:.1um 2:.2um 4 :.45um 1: 1.um 3: 3.um 11: 1.um A: 25mm DOE B: 254mm DOE C: O-ring D: O-ring E: O-ring /Fin End F: O-ring /Fin End M: O-ring 1: 1 2: 2 3: 3 4: 4 E: EPDM N: Buna-N S: Silicone V: Viton T: TEV C: DI cleaning V: Vacuum Package S: SUS ring Insertion V: High Volume 1:.1um 2:.2um 4 :.45um 1: 1.um 3: 3.um 11: 1.um D: O-ring M: O-ring 1: 1 C: DI cleaning V: Vacuum Package U: Ultra High Volume 2:.2um 4 :.45um 1: 1.um 3: 3.um 11: 1.um K: 334 O-ring 1: 1 E: EPDM T: TEV

25 Flomax(PP) G/F(Glass) Sumax(Polysulfone) Nymax(Nylon) Fluoromax(PTFE) All TEFLON Cartridge Constructed of PTFE membrane and PFA support Filtration area increase High performance membranes.4.4 Pressure Drop (MPa) um.2um um.2um H LPM HV Ordering Information Grade Type Media Support Micron Rating End-cap Option Length O-ring E: Electronic Pharmaceutical F : Food & Beverage Blank: Others H: Standard V: High Volume TF: Hydrophobic PTFE T: PFA A5:.5um 1:.1um 2:.2um 4:.45um 1: 1.um 5: 5.um 11: 1um A: 25mm DOE M: O-ring F: O-ring / Fin end 5: 5 1: 1 2: 2 3: 3 T: TEV

26 Pleated Cartridge Filter All TEFLON Capsule Constructed of PTFE membrane and PFA support Filtration area increase High performance membranes 3 1 X.45um 1 X.2um L1 X.1um 1 X.1um 2 Flow rate(l/mim) 1 L1 X.5um 5 X.1um Differential Pressure(MPa) Ordering Information Grade Type Media Support Micron Rating Fitting Type Length Option C: Capsule H: Standard V: High Volume TF: Hydrophobic PTFE TI: Hydrophilic PTFE T: PTFE A5:.5um 1:.1um 2:.2um 4:.45um 1: 1.um 5: 5.um 11: 1um F: Final lock L: Flaretek T: Tube 9: 9 E: Prewetting H: High temperature

27 Special Section Flomax Depth Capsule Capsule 4 inch High Performance Capsule Filter Ez-Set Filter Assembly Mini 2 inch

28 Special Section Flomax Depth Description CMP (ChemicalMechanicalPlanarization)filter cartridges is constructedof polypropylene microfibers with absoluteremoval ratings. Multi-layer depth structure assures high dirt holding capacityand long service life. Consistentand reproducibleperformance. Available in many removal ratings and configurations; low extractables. Applications Final and Pre- filtration of CMP slurry (Ceria/silica/metal) MLCC process & Raw materials Beverage Clarification Prefiltration of Pharmaceuticals Upstream section Downstream section Differential Pressure vs. Flow Rate 3 6 Pressure Drop (psid) um.5um.1um Pressure Drop (psid) um 5.um 7.um 1um Liquid Flow Rate (L/min) water / 1cP Fluid Liquid Flow Rate (L/min) water / 1cP Fluid Particle Removal Efficiency Removal Rating (um) 1um Removal Efficiency (%) 3um 5um 7um TYPE Particle type : ISO FTD Flow rate : LPM

29 Flomax Capsule Mini Specification Configuration Operating Conditions TYPE Removal rating (um) Media Support/Drainage Core/Cage Sealing Length (inch) ID (mm) OD (mm) Differential Pressure Temperature PP Pleated Cartridge.1 ~ 7 Thermal bonding 1 / Max. 25 C Max bar Dimension (unit : mm) Ordering Information Grade Type Media Support Micron Rating End-cap /Connection Option Length O-ring Special option E: Electronic D: Depth PC: CMP grade 1:.1 um 2:.2 um 5:.5 um 7:.7 um 1: 1. um 3: 3. um 5: 5. um 7: 7. um B: 254mm D/O F: / Fin end M: / Flat end A: 25mm DOE 1: 1 2: 2 E: EPDM N: Buna-N S: Silicone V: Viton T: TEV C: Outer Cage

30 Special Section Flomax Capsule Description CMP capsules consist of CMP cartridge filter element in a heat-welded polypropylene shell. Compact and disposable; easy replacement CMP capsules retain oversized slurry particles, while not altering slurry polishing characteristics. Capsule housing is designed to optimize the flow of CMP slurry inside, while exhibiting excellent removal. Applications POU filtration for CMP process (Ceria/silica/metal) Food & Beverage Clarification Prefiltration of Pharmaceuticals Differential Pressure vs. Flow Rate 3 25 Pressure Drop (psid) Liquid Flow Rate (L/min) water / 1cP Fluid.2um.5um

31 Flomax Capsule Mini Specification Configuration Operating Conditions TYPE Removal rating (um) Media Support/Drainage Core/Cage Capsule Housing Length (inch) Connection (Inlet, Outlet/Vent, Drain) Differential Pressure Temperature PP Pleated Cartridge.2 ~ 1 4 1/4", 1/8", 3/8" Max. 25 C Max. 6 4.bar Dimension Ordering Information Grade Type Media Support Micron Rating End-cap /Connection Option Length O-ring Special option C: Capsule D: Depth PC: CMP grade Polypropy lene 2:.2 um 5:.5 um 1: 1. um 3: 3. um 5: 5. um 7: 7. um 11: 1 um X: Inlet/Outlet SW 1/4 Vent/Drain 1/4 V: Inlet/Outlet NPT 1/4 Vent/Drain 1/8 Y: (3/8)" Flare 4: 4

32 Special Section 4" Capsule Filter Description Disposable pleated filter in a polypropylene shell Economical, no housing required Low filter extractables Compatitable with most chemical solvents Application For small volume point-of-use filtration Designed to filter a wide range of acids, bases and solvents Electronics : Photoresists, Wet chemical solvents, Coatings Pharmaceutical : Water, Bacteria, Vaccines Dimensions media Supports Hydrophilic PTFE Hydrophobic PTFE Hydrophilic PES PP 72 Cage/core/ end-caps/shell Operating Condition Maximum Pressure 3.5 bar at 25 C Removal Ratings(um) Hydrophilic PTFE.5, 1.,.2,.45, 1., 3., 1. Hydrophobic PTFE.1,.2,.45, 1., 3., 1. Removal Ratings(um).1 m 2 ~.18 m 2 (4 )

33 Flomax Capsule Mini 3 31 PTFE Hydrophilic PES lpm lpm Differential pressure(psid) um.1 um.3 um.45 um Differential pressure(psid) um.3 um.45 um gpm gpm um lpm Differential pressure(psid) um gpm Ordering Information Grade Type Media Support Micro Rating End-cap Option Length O-ring C: Capsule H: Pleated TF: Hydrophobic PTFE TI: Hydrophilic PTFE SI/SO/SD: Hydrophilic PES HO: High Particle Holding PP PO: High performance PP grade CO: Highclean PP grade A3:.3 um A5:.5 um 1:.1 um 2:.2 um 4:.45 um 1: 1. um 3: 3. um 5: 5. um 11: 1. um 22: 2. um 33: 3. um 55: 5. um X: Inlet/Outlet SW 1/4 Vent/Drain 1/4 V: Inlet/Outlet NPT 1/4 Vent/Drain 1/8 Y: (3/8)" Flare 4: 4 C: DI cleaning & Vacuum V: Vacuum Packaging

34 Special Section High Performance Capsule Filter Description Disposable pleated filter in a polypropylene shell Low filter extractable Compatitable with most chemical solvents especially for high viscosity chemical Applications Electronics: MLCC, FPCB, High viscosity & flow rate process Pharmaceutical : Bacteria, Vaccines Designed to filter a wide range of acids, based & solvents Metal paste, Slurry with high solid contents, Various binders Dimensions With air vent Without air vent

35 Flomax Capsule Mini Differential pressure(psid) um 5.um 1.um lpm Clean pressure drop (kpa) gpm Flow Rate (LPM) Flow rate of poly propylene Flow rate of glass fiber Product type Nominal length of built-in cartridge Length of capsule Capsule material Check valve material O-Ring material Max. operating temperature Without air vent With air vent 25 / / Seal : / Spring : Stainless steel EPDM / Silicon / Viton 8 C Ordering Information Grade Type Media Support Micro Rating O-ring Length Venting S: Capsule H: Pleated PG: Glass fiber (sub 1. μm ) PL: 5:.5um 1: 1.um 15: 1.5um E: EPDM S: Silicone 5: 5" 1: 1" 2: 2" Q: No vent V: Vent D: Depth PL: 12: 1.2um 2: 2.um 3: 3.um 45: 4.5um 11: 1.um 22: 2.um 33: 3.um 55: 5.um 99: 9.um

36 Special Section Ez-Set Filter Assembly Quick filter replacement Minimized air volume (<4ml) Capsule style filter assembly for safety Application Optimized for a small amount of the distribution process Semiconductor / LCD Photo resist filtration Dimensions(mm) Removal Rating( μm ) Filtration Area(m 2 ) Media Support Core Capsule Housing Length(mm) Configuration Connection Differential Pressure Operating Conditions Temperature PTFE :.5,.1,.2,.4 PP : 1., 2.5, 4.5, 1 PTFE :.6 PP :.4 PTFE,, Nylon 66 HDPE HDPE HDPE Diameter : 62 Height : 77.5 Super type Pillar 1) fitting Flowell 2) 6 series - Fittings available upon request 3kgf/cm 2 8 C 1) Pillar fitting is a trademark of Pillar Packing Co., Ltd. 2) Flowell is a trademark of Flowell Corporation.

37 Flomax Capsule Mini Liquid Flow Rate per each Filter Cartridge Flow rate(lpm) um.1um.5um Flow rate(lpm) um 2.5um 1.um Feed pressure(psi) Feed pressure(psi) PTFE PP [ Results may be varied depending on Test condition ] Ordering information Type Media Support material Micron Rating End-cap Connection Option Length O-ring EO: one-touch PO: PP HDPE 1: 1.um 25: 2.5um 45: 4.5um 11: 1.um 33: 3.um X: AS 19 o-ring 3 : 3 E: EPDM B: Nano Pure 3) Perfluoro elastomer K: Kalrez 4) TF: Hydrophobic PTFE A5:.5um 1:.1um 2:.2um 4 :.45um NI: Nylon 66 1:.1um 2:.2um 3) NANO Pure is trademark of M&EE Technology. 4) Kalrez is trademark of Dupont Performance Elastomers

38 Special Section Mini Cartridge Filter Description Small volume point of use photochemical filter 1% integrity tested Low extractables Excellent compatibility Reliably removes soft gel particles Superior downstream cleanliness Application For small volume point-of-use filtration Designed for use with photo chemical solvent Dimensions media PTFE PES PP UPE C Support/cage/core/ end-caps Highdensity Polyethylene A B O-ring Size/End-cap O-ring 15 O-ring external/flat EPDM, Viton, TEV, Kalrez Operating Condition Maximum differential pressure 3.9 bar at 25 C Removal Ratings (um).5,.1,.2,.4, 1.,... 5 구분 Mini(2 ) Effective Area Filter Length 2 length 2.18m 2 52mm a b c

39 Flomax Capsule Mini Liquid flow rate per each Filter cartridge PTFE lpm 3.5um.1um.2um Differential pressure(psid) gpm Ordering Information Grade Type Media Support Micro Rating End-cap Option Length O-ring Special Option E: Electronic Pharmaceutical F: Food & Beverage Blank: Others M: Mini TF: Hydrophobic PTFE A5:.5 um 1:.1 um 2:.2 um 4:.45 um Z: 2-15 O-ring /Flat end 2: 2 E: EPDM V: Viton T: Teflon encapsulated viton C: DI cleaning & Vacuum package V: Vacuum Packaging

40 DP/DT DL/DE DB DJ WOUND (WP/WC/WS) Disc Cartridge Filter Bag Filter(Ring & Flange/Oil Magnet)

41 DP/DT Depth DP/DT Cartridge Filter Description CSM depth filter cartridge is constructed of quality polypropylene filter media to ensure high efficiency in the inner layer. Thermal bonded micro-fiber construction offers no fiber release and consistent flow rates as well as superior filtration performance. High dirt holding capacity and excellent flow rates. s are FDA listed as acceptable for potable and edible. Available in a wide selection of micron ratings from.5 um~1 um Application DI-water, Chemical, High technology coatings, Membrane pre filtration DP DT Media lpm Diameter Core Inside Diameter Outside Diameter Length (mm) 28/3mm 62~65mm 25,5,75,1 254,58,762,116 28/3mm 62~65mm 25,5,75,1 254,58,762,116 Differential pressure(psid) um 5um 1um 5um Temperature (Max/Min) Max. Pressure 8 C 7psi C 9 C 7psi C gpm Ordering Information Grade Type Media Support Micron rating End Cap option Length O-ring E: Electronic Pharmaceutical F: Food & Beverage Blank: Others D: Depth PO: High Performance TO: Heat resistance Polypropy lene :.5 um 1: 1. um 3: 3. um 5: 5. um 1: 1. um 5: 5. um 75: 75. um 11: 1. um A: 25mmDOE B: 254mmDOE C: O-ring/Flat end D: O-ring/Flat end E: O-ring/Fin end F: O-ring/Fin end M: O-ring/Flat end 1: 1 2: 2 3: 3 4: 4 5: 5" E: EPDM N: Buna-N S: Silicone V: Viton

42 Depth DL/DE Cartridge Filter Description CSM economical & longer life cycle depth filter cartridges are constructed of pure polypropylene fiber. To produce filter with melt-blown process. Non-fiber releasing, suitable in relative high temperature. s are FDA listed as acceptable for potable and edible. Available in a wide selection of micron ratings from 1 um~1 um Application DI-water, Chemical, Food & beverage, Coating, Cosmetic. Diameter Media Core Inside Diameter Outside Diameter Length (mm) Temperature (Max/Min) Max. Pressure DL Coreless 28/3mm 63mm 25,5,75,1 8 C 44psi C DE Coreless 28/3mm 63mm 25,5,75,1 8 C 44psi C Differential pressure(psid) lpm 1.um 3.um 5.um 1.um gpm Ordering Information Grade Type Media Support Micron rating End Cap option Length O-ring E: Electronic Pharmaceutical F: Food & Beverage Blank: Others D: Depth PL: Long life PE: Economy Polypropy lene :.5 um 1: 1. um 3: 3. um 5: 5. um 1: 1. um 25: 25. um 5: 5. um 75: 75. um 11: 1. um A: 25mm DOE B: 254mm DOE C: O-ring/Flat end D: O-ring/Flat end E: O-ring/Fin end F: O-ring/Fin end M: O-ring/Flat end 1: 1 2: 2 3: 3 4: 4 5: 5" E: EPDM N: Buna-N S: Silicone V: Viton

43 DP/DT DL/DE DB 4 41 Depth DB Cartridge Filter Description CSM DB cartridge filter, which used 1% PP/PE conjugated fiber to create 3-dimensional skeleton structures, is a high-functional filter that maximizes the treatment efficiency of processed water and disposal capacity. It also maximizes the combining power of each level. It is a heat-combination chemical free filter. At the same time, it keeps a high-level cleanness, as it does not use plastic injection core. s are FDA listed as acceptable for potable and edible. Available in a wide selection Application Food & beverage, Coating, Plating, Painting, Electro deposition Media Core Inside Diameter Diameter Outside Diameter Length (mm) Temperature (Max/Min) Max. Pressure DB Bi-component (PP/PE) 3mm 3mm 65mm 65mm 25,5,75,1 25,5,75,1 8 C 8 C 28psi C Differential pressure(psid) um 1um 5um 1um flow ratee(lpm) Ordering Information Grade Type Media Support Micron rating End Cap option Length O-ring E: Electronic Pharmaceutical F: Food & Beverage Blank: Others D: Depth B: Bi-Component Polypropy lene :.5 um 1: 1. um 3: 3. um 5: 5. um 1: 1. um 25: 25. um 5: 5. um A: 25mm DOE B: 254mm DOE C: O-ring/Flat end D: O-ring/Flat end E: O-ring/Fin end F: O-ring/Fin end M: O-ring/Flat end 1: 1 2: 2 3: 3 4: 4 E: EPDM N: Buna-N S: Silicone V: Viton

44 Depth DJ Cartridge Filter Description CSM Wound jumbo depth filter cartridges is constructed of polypropylene filter media. Thermal bonded micro-fiber construction offers no fiber release and consistent flow rates as well as superior filtration performance. High dirt holding capacity and excellent flow rates. s are FDA listed as acceptable for potable and edible. Available in a wide selection of micron ratings from.5 um~1 um Application DI-water, Chemical, R/O pre-filter DJ lpm Media Core Inside Diameter Diameter Outside Diameter Length (mm) 113mm 15mm 25,5,75,1 25,5,75,1 Differential pressure(psid) um 5um 1um 5um Temperature (Max/Min) Max. Pressure 8 C 8 C 7psi 25 C gpm Ordering Information Grade Type Media Support Micron rating End Cap option Length J: Jumbo D: Depth PO: High performance 1: 1. um 5: 5. um 1: 1. um 25: 25. um 5: 5. um 75: 75. um 11: 1. um A: 25mmDOE B: 254mmDOE 2: 2 3: 3 4: 4 6: 6

45 DP/DT DL/DE DB DJ WOUND Wound WP/C/S Cartridge Filter Description CSM Wound filter cartridge is used in pre-filter application. This enhanced design provides improved dirt-holding capacity over standard wound cartridge. Provides long lifecycle. s are FDA listed as acceptable for potable and edible. Nominal micron ratings.5 um~15 um Application Cotton : Used for potable liquids, vegetable oil beverages. : Organic solvents, Water, Dilute acids, Oxidizing agents, Plating solution. Media Core DP Yarn : / Cotton Matrix : / Cotton Core : / tinned steel 34 & 316SS Grade(um) Maximum Recommended Flow rate (GPM) Inside Diameter Diameter Outside Diameter Length (mm) Temperature (Max/Min) 28/3mm 62~65mm 25,5,75,1 Cotton(121 C) (8 C).5 ~ ~ 1 25 ~ Max. Pressure 7psi 25 C Ordering Information Grade Type Micron rating End Cap option Length Core W: Wound Filter S: Special (yarn/matrix : PP/PP) (matrix only: PP) C: (matrix only: Cotton) :.5 um 1: 1. um 3: 3. um 5: 5. um 25: 25. um 5: 5. um 75: 75. um 97: 1. um 98: 15. um A: 25 DOE 1: 25mm 2: 5mm 3: 75mm 4: 1mm S: 34SS N:316SS WS : PP or 34SS/316SS W PP WC : 34SS/316SS

46 DP/DT DL/DE DB DJ WOUND Disc Disc Cartridge Filter Description Designed in a disc format for liquid filtration process Either cellulose with diatomaceous earth or cellulose with perlite Excellent in removing particle and haze Grades are available with water absorbing capability or that meet pharmaceutical requirements. Proven performance cellulose based filter sheet media Choice of DE or perlite filter aids Nominal retention ratings from.25 to 15 microns High efficiency due to positive zeta potential Exceptional mechanical strength Choice of flat gasket seal or double o-ring seal Choice of economical stainless steel bands or rigid molded polypropylene core Special water absorbing component is available in the 1 and 15 micron grades Steam sterilizable Media grade stamped on sheets for easy identification Applications Wine/Beer Sweeteners Silicone oils Cosmetics Adhesives Pharmaceuticals Flavors/Fragrances Edible oils Distilled spirits Venegar Low Endotoxin detected LEPAMAP Meets European regulation Media/Microns (nominal) Hardware O-Rings Cellulose/DE.25,.3,.5,.8, 1., 2.5, 5, 1 Cellulose/Perlite.5, 1., 2.5, 5, 1, 15 Water absorbing 1, 15 End caps & cell edge seals Center support Stainless steel Buna-N, Silicone, EPDM, Viton, Teflon Operating Parameters Max. operating temperature Max. differential pressure Steam in place Hot water sanitization 176 (8 ) 35psid(2.4bar) 266 (13 ) for 3 minutes at 25 psid maximum (1.7bar) 176 (8 ) for 3 minutes at up to 14 psid (1bar)

47 DP/DT DL/DE DB DJ WOUND Disc Bag Filter Ring & Flange Description CSM filter bag has uniform filtering quality due to strict quality control & advanced manufacturing facility. It has 3 ~ 5% increased filter life and can filter out large sized particles without disturbing liquid flow by adjusting layer structure and thickness. Application Food & Beverage : Used for Beer, Juice, Syrup, Wine filtration. General Industries : Oil, Paint, Chemical, Waste Water filtration. Media Bag Size Ring & Flange Bag filter, Polyester, Nylon 1*23, 1*38, 18*43, 18*81mm Ordering Information Grade Media Type Micron Filter Bag Size Ring Handle CSM-B: Bag Filter PE: Polyethylene Terephthalate P NM: Nylon Monofilament R: Ring Type B: Band Type Plastic flange Type 1: 1 um 8: 8 um 1: 1x23mm 2: 1x38mm 11: 18x43mm 12: 18x81mm E: SUS34 Plastic Ring Z: Zinc Plated Ring W: With Handle N: None Handle Micron Ratings NOM PE PP NM

48 Bag Filter Oil Magnet Description CSM oil magnet filter bag is constructed with multi layers of melt-blown polypropylene media capable of removing oil contaminants from oil liquid streams. These oil absorbing layers are bonded thoroughly that oil contaminants are filtered out without bypass. It is applicable for oil removal from rapid stream or oil contaminated tank. Application CSM-OM-S: for process where continuous oil-free condition is required. CSM-OM-H: for process where complete oil removal is required. CSM-OM-XL: for oil removal from waste water or cooling system. Media Bag Size Ring & Flange Bag filter, Polyester, Nylon 1*23, 1*38, 18*43, 18*81mm Ordering Information Grade Media Type Micron Filter Bag Size Ring CSM-OM-S: Oil Magnet Standard CSM-OM-H: Oil Magnet Heavy Duty CSM-OM-XL: Oil Magnet Extended Life P R: Ring Type Plastic flange Type 1: 1ßum 4: 4ßum 1: 1x23mm 2: 1x38mm 11: 18x43mm 12: 18x81mm E: SUS34 Micron Ratings NOM OM-S OM-H OM-XL

49 Filter Housing Filter Housing PVC Housing for HV type PP Housing for UHV type NEW PFA Housing

50 Filter Housing Filter Bag Housing Davit Type Multi Bag Filter Housing Multi bag filter housing is designed to filtrate liquid more than 8 m3 /h flow rate. The liquid flows from side through upper cover dome into filter bag. Special locking device allows no bypass of liquid. CSM standard BFM housing ranges 2-24 installation of bag filters. However, special specification is available on customer s request. Dimensions Spring Lid Type Multi Bag Filter Housing Open and close by spring allows the installation space minimum. Locating outlet on the bottom side of housing allows the total height 3~5cm lower than standard type housing, thus no foothold or ladder in necessary when replace filters. Minimizing the number of eye bolts reduces the time for filter replacement. Type of Housing Code Max. Operating Pressure(bar) Max. Operating Temperature( C) Multi Bag Housing SUS34/SUS316/Carbon Steel Standard Inlet/Outlet Max. Flow Rate( m3 /h) Normal Flow Rate( m3 /h) Bag Size Filter Area( m3 ) Filter Volum(litre)(approx.) Housing Weight-Dry(kg)(approx.) A Dimension(mm) B C 3 (8A) 8 4 2X (1A) X (15A) X (2A) X (25A) 4 2 1X (25A) X (3A) X (35A) 8 4 2X (4A) X

51 Filter Bag Housing PVC Housing PVC Housing Product Features & advantage Constructed of PVC for HEAD, PVC and PC for BOWL Good chemical resistance in strong chemical process Good heat resistance Minimum extractables s IN, OUT Connection Vent, Drain Cartridge Connection Operation Condition Head : PVC / Bowl : PVC/PC / Union : PVC 4A 1/4 NPT 226 O-ring / 222 O-ring Differential pressure : max. 5kgf(at 25 C) Temperature : max. 6 C Dimensions Ordering information Type Length Connection O-ring Cartridge Connection HS: Housing 1: 1 VV: HEAD PVC/BOWL PVC VC: HEAD PVC/BOWL PC 4: 4A in/out N: NBR E: EPDM V: Viton T: TEV D: O-ring/Flatend M: O-ring/Flat end

52 Filter Housing PP Housing for UHV Type Product Features & advantage Constructed of PP for HEAD, PP for BOWL, PVC for union Good chemical resistance in strong chemical process Good heat resistance Minimum extractables s IN, OUT Connection Vent, Drain Cartridge Connection Operation Condition Head : PP / Bowl : PP / Union : PP 4A / 5A 3/8 NPT 334 O-ring Differential pressure : max. 5kgf (at 25 C) Temperature : max. 5 C Dimensions Ordering information Type Length Connection O-ring Cartridge Connection HS: Housing UHV P HEAD PP/BOWL PP 4: 4A in/out 5: 5A in/out N: NBR E: EPDM V: Viton T: TEV K: O-ring/Flat end

53 PP Housing for UHV type NEW PFA Housing 5 51 NEW PFA Housing Product Features & advantage Constructed of new PFA Good chemical resistance in strong chemical process Good heat resistance Minimum extractables No fracture by twist of o-ring Application Dimensions Most acids, bases and solvents at temperatures up to 8 C Viscous chemicals such as room temperature acids Size(inch) s IN, OUT Connection Operation Condition 5, 1, 2 Housing : New PFA O-ring : Viton, TEV 3/4 tube connection 1 tube connection 3/4 NPT female connection Differential pressure : max. 3.2bar(at 25 C) Temperature : max. 8 C Option Accessories

54 Filter Housing Chemical Compatibility Data interpretation Chemical Compatibility Observations are Divided into Three Categories as Follows : R Recommended : No significant changes observed in performance, physical properties, dimensions or visible indication of chemical attack of the cartridge filter. LR Limited Recommended : Moderate changes in physical properties or dimensions of the cartridge filter were observed. Filter may be suitable for short-term exposure at low pressure and ambient temperatures. NR Not Recommended : The filter cartridge is basically unstable. In most cases, extensive shrinking or swelling occurs. Filter may gradually weaken or partially dissolve after extended exposure. Temperatures. Filter media Media PP PES PTFE Media PP PES PTFE Acids Acetic acid, glacial R R R Glycols Ethylene glycol R R R Acetic acid 9% R R R Glycerine R R R Acetic acid 3% R R R Propylene glycol R R Acetic acid 1% R R R Halogenated Hydrocarbons Hydrochloric acid, conc. R R Carbon tetrachloride LR R R Hydrochloric acid, 6N R R R Chlorofom NR R R Nitric acid, conc. R R ChlorotheneR NU NR Nitric acid, 6N R R R Ethlene dichloride LR Sulfuric acid, conc. R R FreonR TF LR R Sulfuric acid, 6N R R R Freon TMC LR Phosphoric R R GenosolvR D Chromic acid, conc. R Methylene chloride LR R LR Hydrofluoric acid, 6N R R R Perchloroethylene NR Trichlorethylene NR Alcohols Ketones Amyl alcohol R R R Benzyl alcohol, 1% R R Benzyl alcohol, 3% R R Butanol R R R Ethanol R R R Isopropanol R R R Methanol R R R Aromatic Hydrocarbons Benzene NR NR LR Toluene NR LR Xylene NR LR Bases Ammonium hydroxide, 3N R R Ammonium hydroxide, 6N R R Potassiium hydroxide,3n R sodium hydroxide, 3N R R R sodium hydroxide, 6N R R R Esters Amyl acetate R R Butyl acetate LR Cellosolve acetate R Ethyl acetate LR R Isopropyl acetate R R Methyl acetate R Ethers Ethyl ether LR R Isopropyl R R Dioxane R Tetrahydrofuran NR R Acetone R R R Cyclohexanone R R R Methyl ethyl ketone R R Methyl isobutyl ketone R R Oils Cottonseed oil R Lubrication oil MIL-L-788 R Peanut oil R Sesame oil R White petrolatum R Photoresist Positive R Negative R Miscellaneous Acetonitrile LR R Aniline LR Dimethyl fomamide R R Dimethyl sulfoxide R R Fomaldehyde, 37% LR R Fomaldehyde, 4% R R Gasoline NR LR Hexane, dry NR JP-4 R Kerosene R Nickel sulfate solution R Phenol, liquified R Pyridine LR NR Skydrol 5 Turpentine LR Water R

55 Chemical Compatibility Cartridge O-ring s O-ring s Media EPR VITON SILICONE TEFLON A-TYPE B-TYPE C-TYPE M-TYPE D-TYPE E-TYPE F-TYPE a b c d Acetic Acid, Glacial LR NR R R Acetone R NR R R Acetonitrile R NR NR R Alconox 1% Ammonium Hydroxide R R R R Ammonium Sulfate Saturated R R R R Amyl Acetate R NR NR R Amyl Alcohol R R NR R Benzene NR R NR R Benzyl Alcohol R R R R Boric Acid R R R Butyl Acetate R NR NR Butyl Alcohol R R R R Carbon Tetrachloride NR R NR R Cellosolve (Ethyl) R LR NR CHAPS(zwitterionic detergent) LR Chloroform NR R NR R Cychlohexanone LR NR LR R Diethyl Pyrocarbonate.2% Dimethyl Sulfoxide NR NR NR R Dimethylacetamide NR NR R Dimethylfomamide LR NR R R Dioxane NR NR NR R Ether NR NR LR Ethyl Acetate LR NR NR Ethy Alcohol R R LR R Ethylene Glycol R R R R Formaldehyde R NR R R Formic Acid 5% R R Freon TF or PCA NR R R Gasoline NR R NR R Glycerine(Glycerol) R R R R Guanidine HCL 6M R Guanidine Thiocyanate 5M R Helium R R Hexane NR R NR R Hydrochloric Acid 1N NR R R R Hydrochloric Acid 6N NR R R R Hydrochloric Acid Conc NR NR R R Hydrofluoric Acid NR NR NR R Hydrogen R R NR Hydrogen Peroxide 3% R R R R Hydrogen Peroxide 3% R R R R Hydrogen Peroxide 9% NR R NR Hypo (photo) Na R R R R Isobutyl Alcohol R R R R Isopropyl Acetate R NR NR R Isopropyl Alcohol R R R R Kerosene NR R NR Latic Acid 5% R R R Lubrol PX MEK R NR NR Mercaptoethanol.1M R NR Methyl Acetate R NR NR R Methyl Alchol R R R R Methylene Chloride NR NR NR R MIBK R NR NR Mineral Sprits NR R NR Nitric Acid 6N R R NR R Nitric Acid (Conc.) NR R NR R Nitrozenzene NR R NR R Nitrogen R R R Nonidet-P 4 R Ozone R NR NR Paraldehyde R NR R Pentane NR R NR R Petroleum Ether NR R NR Phenol R R NR Potassium Hydroxide 3N R R NR Pyridine NR NR NR R Silicone Oils NR R NR Sodium Carbonate R R R

56 The Right Fit 23th Floor, Namsan Square Bldg. 173, Toegye-ro, Jung-gu, Seoul, South Korea Tel: csm@toray-tck.com WJC-21471