Torrento high-flux, The new standard for nondewetting PTFE filters enabling unsurpassed particle protection and yield enhancement
|
|
- Shana Jordan
- 6 years ago
- Views:
Transcription
1 ONTMINTION ONTROL SOLUTIONS Torrento high-flux, HIGH-RETENTION Filters The new standard for nondewetting PTFE filters enabling unsurpassed particle protection and yield enhancement
2 ultimate particle retention with ultra-high flow rate performance Overview Torrento filters provide the ultimate particle retention with ultra-high flow rate performance using an advanced nondewetting PTFE membrane. Torrento filters are specially designed to meet the critical customer demands for advanced technology during wet etch and cleaning processes. These filters provide high-yield, rapid bath cleanup cycles, extended filter life, fast changeouts and cleanliness all in a prewet package for ease-of-use. High-flux Membrane Technology Torrento filters use high-flux filter membrane that provides an ultra-high flow rate at the specified pore size rating. The combination of high flow and retention performance provides an optimal bath cleanup profile to minimize particle-related wafer defects and reduce process cycle time. The capability to maintain flow rate at an extremely small pore size in outgassing chemistries such as SPM, S1 and S ensures the stable processing conditions needed for the high pk results demanded at advanced technology nodes. ost-minimized Performance Torrento T3 and TE filters incorporate Entegris advanced device construction technology to provide more surface area in each filter, leading to extended filter lifetime. The membrane also reduces overall maintenance and replacement costs related to wet bench pumps as the low filter resistance design reduces pump strokes, thereby reducing wear and tear. pplication-oriented Design Leveraging Entegris applications expertise, the Torrento filter design allows development teams to avoid the performance compromises of general use filters. This design is supported by Entegris world-class global analytical services and applications support teams. Rapid hangeouts and Safety Torrento filters are available in a wide variety of cartridge and disposable formats to maximize installation flexibility and upgrades. Torrento TE and T3 cartridges and disposable filters are designed for recirculation bath applications, while Torrento 15/3 disposables are useful for single wafer processing. The disposable filters eliminate operator handling of the filter element, thus minimizing contamination risk. The disposable design also reduces the potential for operator exposure to chemicals during installation and disposal. leanliness Torrento 15 nm and nm filters are offered with both standard and UM cleanliness options. The Torrento P15 and P3 disposables are delivered standard with ultra-low metallic specifications. Torrento nm TE filters are offered with UM cleanliness as an option. Use of UM ultra-low extractable products will ensure bath cleanliness for critical cleaning processes, like S1. These filters are certified to low cleanliness limits.
3 Features and enefits Features High-flux membrane Nondewetting PTFE membrane filter in a prewet package Optimized patented membrane Minimized cost of ownership Disposable filter options Ultra-clean metallics option enefits Low membrane resistance design allows high particle retention with high flow Eliminates prewetting and flushing cycle High-purity, clean, ready-to-use filter Excellent performance in outgassing chemistries Recommended for aqueous-based chemicals at ambient temperatures (including H SO, H 3 PO, HNO 3, HL, NH F, H O, TMH, NH OH and ozonated water) and elevated temper ature applications (including S1, S, SPM, nitride etch, metal etch and various other resist stripping chemistries) TE and T3 designs incorporate more membrane for ultra-high flow and extended filter lifetime Nondewetting membrane enables rapid filter changeout to maximize process uptime Reduced wear and tear of wet bench pumps minimizes maintenance and replacement costs Requires less space for changeout llows quick installation and minimizes downtime while limiting the handling and exposure to hazardous chemicals Ensures bath cleanliness for sensitive wet cleaning processes Entegris, Inc.
4 Product ttributes and Specifications * Per 1 cartridge equivalent TE/T3 Type 15/3 Type Materials: Membrane Prewet, nondewetting PTFE Prewet, nondewetting PTFE rating: Membrane area: Maximum operating conditions, TE type: Metallic extractable levels:* Particle shedding cleanliness: TO recovery (per 1 equivalent): Resistivity recovery (per 1 equivalent): Supports PF PF artridge o-ring options E-FKM, hemraz or Kalrez, Viton Extreme ETP Disposable shell PF PF Maximum operating pressure Maximum forward differential pressure Maximum reverse differential pressure Maximum operating temperature nm (. µm) 15 nm (.15 µm) TE 1 : m (1 ft ) T3 1 : 3 m (3 ft ) TE : m ( ft ) T3 : m ( ft ).5 MPa (5. bar; 5.97 MPa (.97 bar; 1 1. MPa (. bar; 5.5 MPa (.5 bar; N/ 15 nm (.15 µm) 15 type:.19 m (.5 ft ) 3 type:. m (.7 ft ). MPa (. bar; 5.19 MPa (1.9 bar; MPa (3.9 bar; MPa (1.9 bar; 95.3 MPa (3.5 bar; MPa (.9 bar; Standard artridge <5 µg/device Disposable <1 µg/device UM artridge <1 µg/device (guaranteed levels) Disposable <3 µg/device Performance Data <15 particles/1 5 L/min DI water flow artridge within 1 ppb of feed after 1 L 1 L/min Disposable within 5 ppb of feed after 5 min 5 L/min Within.5 MΩ of feed after a 1 L water 1 L/min N/ <3 µg/device <1 particles/1 ml. 5 L/min DI water flow Within 5 ppb of feed after 3 min 3. L/min Hydraulic Performance for Disposable Products Pressure Limit (psi) hem-line II 1 hem-line I Temperature ( ) Entegris, Inc. 3
5 Torrento 15 nm and nm artridge Filters Dimensions End View with hemlock Key on artridge Ø 95.3 mm (3.75 ) REF Ø 3. mm (3.7 ). mm REF (.15 ) Performance Data 1 :. mm (9.1 ) : 71. mm (1.5 ) mm (. ) Ordering Information TE 1 artridge Filters nm nm Flow Rate (L/min) 1 ( F) TE artridge Filters nm nm Flow Rate (L/min) 1 ( F) T3 1 artridge Filters nm TRX 15 nm TPW Typical Flow Rate (L/min) Torrento TE artridge Filter STNDRD LEN T K* RX = nm Length TE = 1 TE = Torrento TE artridge Filter UM LEN T K* RW = 15 nm RX = nm Torrento T3 artridge Filter STNDRD LEN T 1 K* PW = 15 nm RX = nm Length E = 1 E = Torrento T3 artridge Filter UM LEN T 3E 1 K* PW = 15 nm RX = nm Length 3TE = 1 3T = Length 3E = 1 *Optional hemlock key attached to cartridge for use with hemlock housing ONLY. O-ring 1 = TEV 1 = E-ETP 1 = hemraz K1 = Kalrez 79 R1 = Kalrez 375 O-ring 1 = TEV 1 = E-ETP R1 = Kalrez 375 O-ring 1 = E-ETP O-ring 1 = E-ETP Entegris, Inc.
6 Torrento hem-line TM II 15 nm and nm Disposable Filters Nominal Dimensions for hem-line II onfigurations Flaretek with 1 Vent/Drain Flaretek with 1 Vent/Drain Flowell Series with 1 Vent/Drain Flowell Series with 1 Vent/Drain. mm (.1 ). mm (.1 ) Ø11 mm (.3 ) Ø11 mm (.3 ) Ø11 mm (.3 ) Ø11 mm (.3 ) Ø1 mm (.1 ) Ø1 mm (.1 ) Ø1 mm (.1 ) Ø1 mm (.1 ) Flaretek s Male Inlet/ Outlet Vent/ Drain Filter 1 Filter mm (9.5 ) 37 mm (1.5 ) 33 mm (13.5 ) 37 mm (1.5 ) mm (9.5 ) 37 mm (1.5 ) 35 mm (1.1 ) 37 mm (1.5 ) 3 1 mm (9. ) 37 mm (1.5 ) 359 mm (1.13 ) 37 mm (1.5 ) mm (1.3 ) 37 mm (1.5 ) 3 mm (1. ) 37 mm (1.5 ) mm (9. ) 1 mm (1.1 ) 33 mm (1.9 ) 1 mm (1.1 ) mm (1.3 ) 1 mm (1.1 ) 37 mm (1. ) 1 mm (1.1 ) Flowell Series s Male Inlet/ Outlet Vent/ Drain Filter 1 Filter 3 1 mm (9.7 ) 37 mm (1.5 ) 31 mm (1.17 ) 37 mm (1.5 ) mm (1.15 ) 37 mm (1.5 ) 371 mm (1. ) 37 mm (1.5 ) mm (9. ) 1 mm (1.1 ) 35 mm (13.9 ) 1 mm (1.1 ) mm (9.9 ) 1 mm (1.1 ) 3 mm (1. ) 1 mm (1.1 ) Entegris, Inc. 5
7 Nominal Dimensions for hem-line II onfigurations Super 3 Type Pillar (Male) with 1 Vent/Drain Super 3 Type Pillar (Male) 1 Vent/Drain Super 3 Type Pillar (Female) 1 Vent/Drain. mm (.1 ) Ø11 mm (.3 ) Ø11 mm (.3 ) Ø11 mm (.3 ) Ø1 mm (.1 ) Ø1 mm (.1 ) Ø1 mm (.1 ) Super 3 Type Pillar s Male Inlet/ Outlet Vent/ Drain Filter 1 Filter 1 1 mm (. ) 1 mm (1.1 ) 337 mm (13.7 ) 1 mm (1.1 ) mm (9.33 ) 37 mm (1. ) 35 mm (13.7 ) 37 mm (1. ) mm (1.3 ) 37 mm (1. ) 33 mm (15. ) 37 mm (1. ) 3 1 (9. ) 1 mm (1.1 ) 39 mm (13.7 ) 1 mm (1.1 ) mm (1.35 ) 1 mm (1.1 ) 3 mm (15. ) 1 mm (1.1 ) Super 3 Type Pillar s Female Inlet/ Outlet Vent/ Drain Filter 1 Filter mm (9.5 ) 37 mm (1. ) 35 mm (1.9 ) 37 mm (1. ) Entegris, Inc.
8 Performance Data hemline I and hemline II Disposable Filters TE 1 Disposable Filters with 3 s nm nm Flow Rate (L/min) 1 ( F) TE 1 Disposable Filters with 1 s nm nm Flow Rate (L/min) 1 ( F) TE 1 Disposable Filters with 3 s TE 1 Disposable Filters with 1 s nm nm nm nm Flow Rate (L/min) 1 ( F) Flow Rate (L/min) 1 ( F) T3 1 Disposable Filters with 3 s T3 1 Disposable Filters with 1 s nm 15 nm. TPW. TPW 5.3 nm.3 TRX nm. 3. TRX Flow Rate (L/min) 1 ( F) Flow Rate (L/min) 1 ( F) Entegris, Inc. 7
9 Ordering Information Torrento TE hem-line II Disposable Filter STNDRD LEN T TE RDX = nm OF = 3 inlet/outlet, 1 vent/drain, 1F = 3 inlet/outlet, 1 vent/drain, F = 1 inlet/outlet, 1 vent/drain, F = 1 inlet/outlet, 1 vent/drain, OW = 3 inlet/outlet, 1 vent/drain, Flowell series fittings W = 1 inlet/outlet, 1 vent/drain, Flowell series fittings OFF = 3 inlet/outlet, 1 vent/drain, FF = 1 inlet/outlet, 1 vent/drain, OWW = 3 inlet/outlet, 1 vent/drain, Flowell series fittings WW = 1 inlet/outlet, 1 vent/drain, Flowell series fittings PPM = 3 inlet/outlet, 1 vent/drain, P3PM = 3 inlet/outlet, 1 vent/drain, PPM = 1 inlet/outlet, 1 vent/drain, P3PM = 3 inlet/outlet, 1 vent/drain, Torrento TE hem-line II Disposable Filter UM LEN T E RDW = 15 nm RDX = nm OF = 3 inlet/outlet, 1 vent/drain, F = 1 inlet/outlet, 1 vent/drain, F = 1 inlet/outlet, 1 vent/drain, W = 3 inlet/outlet, 1 vent/drain, Flowell series fittings W = 1 inlet/outlet, 1 vent/drain, Flowell series fittings PPM = 3 inlet/outlet, 1 vent/drain, PPM = 1 inlet/outlet, 1 vent/drain, Torrento T3 hem-line II Disposable Filter STNDRD LEN T 3TE PDW = 15 nm RDX = nm OF = 3 inlet/outlet, 1 vent/drain, 1F = 3 inlet/outlet, 1 vent/drain, F = 1 inlet/outlet, 1 vent/drain, F = 1 inlet/outlet, 1 vent/drain, W = 3 inlet/outlet, 1 vent/drain, Flowell series fittings W = 1 inlet/outlet, 1 vent/drain, Flowell series fittings Torrento T3 hem-line II Disposable Filter UM LEN T 3E PDW = 15 nm RDX = nm OF = 3 inlet/outlet, 1 vent/drain, 1F = 3 inlet/outlet, 1 vent/drain, F = 1 inlet/outlet, 1 vent/drain, F = 1 inlet/outlet, 1 vent/drain, W = 3 inlet/outlet, 1 vent/drain, Flowell series fittings W = 1 inlet/outlet, 1 vent/drain, Flowell series fittings Entegris, Inc.
10 hem-line I ore Vent Disposable Filters Dimensions LH: L-Line 3 Super Type Pillar with ore Vent 1 mm (.55 ) 37 mm (1. ) mm TH: T-Line 3 Super Type Pillar with ore Vent mm 1 mm (.55 ) H: T-Line 3 Super Type Pillar with ore Vent mm 1 mm (.55 ) mm 15 mm DP 5 mm (.9 ) mm 15 mm DP 5 mm (.9 ) mm mm DP 33 mm (1.3 ) (1. ) Ø1 mm (. ) (1. ) Ø1 mm (. ) (1. ) Ø1 mm (. ) mm (1.57 ) mm (1.57 ) mm (1.57 ) TW: T-Tube 3 Flowell Series with ore Vent 1 mm (.55 ) 3S: T-Line 3 Super Type Pillar with ore Vent mm S: T-Line 1 Super Type Pillar with ore Vent mm mm (1.57 ) mm (1.57 ) 17.5 mm DP 5 mm (.9 ) mm DP mm 33 mm (1.3 ) mm DP mm 33 mm (1.3 ) (1. ) Ø1 mm (. ) (1. ) Ø1 mm (. ) (1. ) Ø1 mm (. ) mm (1.57 ) mm (1.57 ) mm (1.57 ) Entegris, Inc. 9
11 hem-line I ore Vent s Products Sleeve LH: L-Line: 3 inlet/outlet; TH: T-Line: 3 inlet/outlet; H: T-Line: 3 inlet/outlet; 1 vent/drain; TW: T-Tube: 3 inlet/outlet; Flowell Series fittings 3S: T-Line: 3 inlet/outlet; S: T-Line: 1 inlet/outlet; Length (Overall Height) TE, T mm (15. ) TE, T3 1 3 mm (15. ) TE, T mm (15.51 ) TE, T3 1 (17.17 ) TE, T mm (15.39 ) TE, T mm (15.39 ) Length (ottom to enterline ) 37 mm (1.7 ) 37 mm (17.7 ) 333 mm (13.11 ) 33 mm (1.9 ) 333 mm (13.11 ) 333 mm (13.11 ) Length (Inlet to Outlet) 9 mm (.5 ) 1 mm (7.9 ) 1 mm (7. ) 5 mm (9.9 ) 17 mm (.77 ) 1 mm (7.1 ) 1 Entegris, Inc.
12 Ordering Information Torrento TE hem-line I ore Vent Disposable Filter STNDRD LEN T TE RVX = nm LH = 3 inlet/outlet, L-line, 1 vent/drain, TH = 3 inlet/outlet, T-line, 1 vent/drain, H = 3 inlet/outlet, T-line, 1 vent/drain, TW = 3 inlet/outlet, T-tube, 1 vent/drain, Flowell series fittings 3S = 3 inlet/outlet, T-line, 1 vent/drain, S = 1 inlet/outlet, T-line, 1 vent/drain, Torrento TE hem-line I ore Vent Disposable Filter UM LEN T E PVW = 15 nm RVX = nm TH = 3 inlet/outlet, T-line, 1 vent/drain, H = 1 inlet/outlet, T-line, 1 vent/drain, 3S = 3 inlet/outlet, T-line, 1 vent/drain, S = 1 inlet/outlet, T-line, 1 vent/drain, Torrento T3 hem-line I ore Vent Disposable Filter STNDRD LEN T 3TE PVW = 15 nm RVX = nm TH = 3 inlet/outlet, T-line, 1 vent/drain, H = 1 inlet/outlet, T-line, 1 vent/drain, 3S = 3 inlet/outlet, T-line, 1 vent/drain, S = 1 inlet/outlet, T-line, 1 vent/drain, Torrento T3 hem-line I ore Vent Disposable Filter UM LEN T 3E PVW = 15 nm RVX = nm TH = 3 inlet/outlet, T-line, 1 vent/drain, H = 1 inlet/outlet, T-line, 1 vent/drain, 3S = 3 inlet/outlet, T-line, 1 vent/drain, S = 1 inlet/outlet, T-line, 1 vent/drain, Entegris, Inc. 11
13 Standard hem-line I Disposable Filters Dimensions S: T-Line 3 inlet/outlet, 1 vent/ drain, Super Type Pillar mm 1 mm (.55 ) H: T-Line 1 inlet/outlet, 1 vent/ drain, Super Type Pillar mm 1 mm (.55 ) LH: L-Line 3 inlet/outlet, 1 vent/ drain, Super Type Pillar 37 mm (1. ) 1 mm (.55 ) 9 mm (3.5 ) mm 15 mm DP 5 mm (.9 ) mm mm DP mm mm (1. ) (. ) Ø1 mm (1. ) (. ) Ø1 mm (1. ) Ø1 mm (. ) T3: T-Tube 3 inlet/outlet, 1 vent/ drain, Super 3 Type Pillar 1 mm (.55 ) TW: T-Tube 3 inlet/outlet, 1 vent/ drain, Flowell Series 1 mm (.55 ) TF: T-Tube 3 inlet/outlet, 1 vent/ drain, FlareLock II 1 mm (.55 ) mm (1.57 ) mm (1.57 ) 17.5 mm DP 5 mm (.9 ) mm (1.57 ) mm (1.57 ) 17.5 mm DP 5 mm (.9 ) mm (1.57 ) 73 mm (.7 ) mm (1.57 ) 17.5 mm DP 5 mm (.9 ) (1. ) Ø1 mm (. ) (1. ) Ø1 mm (. ) (1. ) Ø1 mm (. ) 1 Entegris, Inc.
14 3S: T-Line 3 inlet/outlet, 1 vent/ drain, Super 3 Type Pillar mm S: T-Line 1 inlet/outlet, 1 vent/ drain, Super 3 Type Pillar mm mm DP mm 33 mm (1.3 ) mm DP mm 33 mm (1.3 ) (1. ) (. ) (. ) Ø1 mm Ø1 mm Standard hem-line I s Products Sleeve LH: L-Line: 3 inlet/outlet; TH: T-Line: 3 inlet/outlet; H: T-Line: 1 inlet/outlet; S: T-Line: 1 inlet/outlet; 3S: T-Line: 3 inlet/outlet; TW: T-Tube: 3 inlet/outlet; Flowell Series fittings T3: T-Tube: 3 inlet/outlet; TF: T-Tube: 3 inlet/outlet; FlareLock II fittings Length (Overall Height) Length (ottom to enterline ) Length (Inlet to Outlet) TE, T3 1 1 mm (1. ) 351 mm (13. ) 9 mm (3.5 ) TE, T mm (15.59 ) 3 (13. ) 1 mm (7. ) TE, T3 1 mm (15. ) 31 mm (13. ) 1 mm (7. ) TE, T mm (15.7 ) 31 mm (13. ) 1 mm (7.1 ) TE, T mm (15.7 ) 31 mm (13. ) 17 mm (.77 ) TE, T3 1 (17.1 ) 33 mm (1.9 ) 5 mm (9.9 ) TE, T3 1 9 mm (17.7 ) 39 mm (1.5) mm (1.55 ) TE, T3 1 3 mm (1.59 ) 7 mm (9.7 ) 5 mm (9.9 ) Entegris, Inc. 13
15 Ordering Information Torrento TE Standard hem-line I Disposable Filter STNDRD LEN TRD TE X = nm LH = 3 inlet/outlet, L-line, 1 vent/drain, TH = 3 inlet/outlet, T-line, 1 vent/drain, H = 1 inlet/outlet, T-line, 1 vent/drain, T3 = 3 inlet/outlet, T-tube, 1 vent/drain, TW = 3 inlet/outlet, T-tube, 1 vent/drain, Flowell series fittings TF = 3 inlet/outlet, T-tube, 1 vent/drain, FlareLock II fittings Torrento TE Standard hem-line I Disposable Filter UM LEN TRV E W = 15 nm X = nm LH = 3 inlet/outlet, L-line, 1 vent/drain, TH = 3 inlet/outlet, T-line, 1 vent/drain, H = 1 inlet/outlet, T-line, 1 vent/drain, TF = 3 inlet/outlet, T-tube, 1 vent/drain, FlareLock II fittings Torrento TE Standard hem-line I Disposable Filter with Modified Vent STNDRD LEN TRM TE X = nm 3S = 3 inlet/outlet, T-line, 1 vent/drain, S = 1 inlet/outlet, T-line, 1 vent/drain, Torrento TE Standard hem-line I Disposable Filter with Modified Vent UM LEN TRM E W = 15 nm X = nm 3S = 3 inlet/outlet, T-line, 1 vent/drain, S = 1 inlet/outlet, T-line, 1 vent/drain, Torrento T3 Standard hem-line I Disposable Filter STNDRD LEN T 3TE TH = 3 inlet/outlet, T-line, 1 vent/drain, RDX = nm Torrento T3 Standard hem-line I Disposable Filter UM LEN T 3E TH = 3 inlet/outlet, T-line, 1 vent/drain, RDX = nm 1 Entegris, Inc.
16 Torrento 3 15 nm Disposable Filters UM LEN Dimensions mm Super Type Pillar 3. mm (1. ) 1 Super Type Pillar 3. mm (1. ) 3 Flaretek ompatible 3. mm (1. ) 19 mm (7. ). mm (3.31 ) 9. mm (3.5 ) mm (.3 ). mm (3.31 ) 9. mm (3.5 ) mm (. ). mm (3.31 ) 9. mm (3.5 ) 3. mm (1. ) 3. mm (1. ) 3. mm (1. ) mm Super 3 Type Pillar 3 Super 3 Type Pillar 1 Super 3 Type Pillar 31. mm (1. ) 31. mm (1. ) 31. mm (1. ) 19 mm 7. ). mm (3.31 ) 9. mm (3.5 ) 19 mm 7. ). mm (3.31 ) 9. mm (3.5 ) 199 mm (7. ). mm (3.31 ) 9. mm (3.5 ) 31. mm (1. ) 31. mm (1. ) 31. mm (1. ) Ordering Information Torrento 3 Disposable Filter UM LEN TRP 3 W = 15 nm fitting P = 1 inlet/outlet, 1 vent/drain, S = 1 inlet/outlet, 1 vent/drain, 3S = 3 inlet/outlet, 1 vent/drain, 3F = 3 inlet/outlet, 1 vent/drain, S = mm inlet/outlet, mm vent/drain, P = mm inlet/outlet, mm vent/drain, Performance Data 3 15 nm Disposable Filters mm fittings 1 fittings Typical Flow Rate (L/min) 1 ( F) Entegris, Inc. 15
17 Torrento nm Disposable Filters UM LEN Dimensions mm Super Type Pillar 3 Flaretek ompatible 3. mm (1. ) 3. mm (1. ) 1. mm (5.5 ). mm (3.31 ) 9. mm (3.5 ) 15. mm (.5 ). mm (3.31 ) 9. mm (3.5 ) 3. mm (1. ) 3. mm (1. ) mm Super 3 Type Pillar 3 Super 3 Type Pillar 31. mm (1. ) 31. mm (1. ) 135. mm (5.3 ). mm (3.31 ) 9. mm (3.5 ) 11. mm (5.55 ). mm (3.31 ) 9. mm (3.5 ) 31. mm (1. ) 31. mm (1. ) Performance Data nm Disposable Filters nm fittings Typical Flow Rate (L/min) 1 ( F) Ordering Information Torrento 15 Disposable Filter UM LEN TRP 15 W = 15 nm P = mm inlet/outlet, mm vent/drain, 3S = 3 inlet/outlet, 1 vent/drain, S = mm inlet/outlet, mm vent/drain, 3F = 3 inlet/outlet, 1 vent/drain, 1 Entegris, Inc.
18 For More Information Please call your Regional ustomer Service enter today to learn what Entegris can do for you. Visit and select the ustomer Service link for the center nearest you. Terms and onditions of Sale ll purchases are subject to Entegris Terms and onditions of Sale. To view and print this information, visit and select the Legal Notices link from the footer. Entegris, the Entegris Rings Design, hemlock, Flaretek, FlareLock, Torrento and hem-line TM are trademarks of Entegris, Inc. Teflon is a registered trademark of E.I. du Pont de Nemours and ompany. hemraz is a registered trademark of Greene, Tweed & o. Viton, Viton Extreme TM and Kalrez are trademarks of DuPont Dow Elastomers, L.L.. Flowell is a registered trademark of Flowell orporation. Pillar is a registered trademark of Nippon Pillar Packaging ompany, Ltd. ENTEGRIS, IN. orporate Headquarters 19 oncord Road illerica, M 11 US ustomer Service Tel ustomer Service Fax In North merica Entegris, Inc. ll rights reserved Printed in US 3-55ENT-11
CRITICAL MATERIALS HANDLING TORRENTO AT SERIES FILTERS
CRITICL MTERILS HNDLING TORRENTO T SERIES FILTERS dvanced 15 and 2 nm filters enabling superior particle protection and ultra cleanliness in advanced wet, etch and clean applications TORRENTO T SERIES
More informationRINSEGARD HP AND HPX. Simultaneously removes trace levels of positively charged ions and fine particles in ultrapure DI water
CONTAMINATION CONTROL SOLUTIONS RINSEGARD HP AND HPX CARTRIDGE and disposable FILTERS Simultaneously removes trace levels of positively charged ions and fine particles in ultrapure DI water hydrophilic
More informationCRITICAL MATERIALS HANDLING FLUOROGARD RS RESIST STRIPPING FILTERS
CRITICAL MATERIALS HANDLING FLUOROGARD RS RESIST STRIPPING FILTERS Optimized for removal of films, gels and hard particles from photoresist strippers and residue removers superior protection from films,
More informationCRITICAL MATERIALS HANDLING PROCESSGARD PES CARTRIDGE AND DISPOSABLE FILTERS
CRITICL MTERILS HNDLING PROCESSGRD PES CRTRIDGE ND DISPOSBLE FILTERS PES filters for weak acids, bases and DI water filtration PROCESSGRD PES CRTRIDGE ND DISPOSBLE FILTERS for high particle loading applications
More informationOptimizer Point-of-use Photochemical Filters
MICROCONTAMINATION CONTROL Optimizer Point-of-use Photochemical Filters Liquid photochemical filters designed for developer, DI water, and solvent applications in POU photolithography processes Optimizer
More informationNT Flowmeter, Model 4401
ADVANCED MATERIALS HANDLING NT Flowmeter, Model 4401 Simultaneous flow and pressure outputs for high-temperature applications Now more than ever there is a need to measure high-temperature chemicals to
More informationFeature Advantage Benefit. Excellent chemical compatibility Better particle removal performance than polypropylene media
SVN PTFE FILTERS CRITICL MTERILS HNDLING SVN PTFE FILTERS Constructed with PTFE membrane and PP supports for enhanced durability and cleanliness Overview Savana PTFE filters are constructed of PTFE pleated
More informationOverview CHEMLOCK PFA HOUSING. Space-saving housing solution enabling hassle-free cartridge changeouts and reduced exposure to chemicals
CONTAMINATION CONTROL SOLUTIONS CHEMLOCK PFA HOUSING Space-saving housing solution enabling hassle-free cartridge changeouts and reduced exposure to chemicals Overview Entegris Chemlock PFA housing offers
More informationNT ELECTRONIC FLOWMETER, MODEL 4400
CONTAMINATION CONTROL SOLUTIONS NT ELECTRONIC FLOWMETER, MODEL 4400 Provides simultaneous flow and pressure outputs simultaneous flow and pressure outputs Flow and Pressure Measurement Whether it s automation,
More informationUltiKleen G3 HiT KC Assemblies UltiKleen G2 HiT KC Assemblies
Data Sheet MEHITKCENb UltiKleen G3 HiT KC Assemblies UltiKleen G2 HiT KC Assemblies Description The UltiKleen HiT KC Assembly is specially constructed with proprietary fluid flow path improvements, for
More informationInVue Electronic Flowmeter, NT4400
ADVANCED MATERIALS HANDLING InVue Electronic Flowmeter, NT4400 Provides simultaneous flow and pressure outputs Whether it s automation, process control or safety concerns that require flow and pressure
More informationUltiKleen SPM KC Assemblies UltiKleen G2 SPM KC Assemblies
Data Sheet MEUKSPMENa UltiKleen SPM KC Assemblies UltiKleen G SPM KC Assemblies Description The Pall UltiKleen SPM KC and UltiKleen G SPM KC assemblies are completely disposable filter units containing
More informationNT HIGH-TEMPERATURE ELECTRONIC FLOWMETER, MODEL 4401
P/N 1400 (Rev. A 08/12) NT HIGH-TEMPERATURE ELECTRONIC FLOWMETER, MODEL 4401 User Guide Table of Contents Introduction... 2 Dimensions... 3 Installation... 5 Provided Equipment... 5 Operating Environment...
More informationWAFERGARD III NF-75O IN-LINE GAS FILTERS. Installation and use manual
WAFERGARD III NF-75O IN-LINE GAS FILTERS Installation and use manual Table of Contents Introduction... 2 Features and Benefits... 2 Applications... 2 Specifications... 2 Installation... 3 Step 1: Unpack
More informationFluoromax (PTFE) Description. Application. Specifications
Pleated Cartridge Filter Fluoromax () - Nymax has superior flow rate and efficiency maximizing the performance of the Teflon media - Fluoromax is durable and effective for removing contaminants from aggressive
More informationNT PROPORTIONAL CONTROL VALVE, MODEL 6300
P/N 1365 (Rev. B 4/14) NT PROPORTIONAL CONTROL VALVE, MODEL 63 User Guide Table of Contents Introduction... 2 Principle of Operation... 2 Factory Configured... 2 General Considerations... 2 Line Pressure...
More informationIntegra Pneumatically Operated Diaphragm Valves with Position Indication Option
P/N 030-20 REV. C 09/7 INSTRUCTION SHEET Integra Pneumatically Operated Diaphragm Valves with Position Indication Option ¼" orifice, 2-way, normally closed, sampling designs REPAIR INSTRUCTIONS For models:
More informationFluoroLine Ultrapure PFA Tubing
ADVANCED MATERIALS HANDLING FluoroLine Ultrapure PFA Tubing Excels in ultrapure, chemically corrosive applications Entegris offers a complete line of tubing to satisfy your need for an ultraclean, leak-free
More informationCRITICAL MATERIALS HANDLING PRIMELOCK FITTINGS
CRITICAL MATERIALS HANDLING PRIMELOCK FITTINGS A premium PFA fitting for high-purity and corrosive chemical applications Now available in 1 1 2 size enabling clean, consistent leak-free connections Overview
More informationRosedale Model HSS300 and HSS750 Single Cartridge Housings for Liquids
H S S S I N G L E C A R T R I D G E H O U S I N G S Rosedale Model HSS0 and HSS750 Single Cartridge Housings for Liquids Precision Machined Knife-Edge Seal The Rosedale Model HSS single element filter
More informationClarigard Filters High-performance filters for the clarification and prefiltration of process fluids
Lenntech info@lenntech.com www.lenntech.com Tel. +31-1-261.9. Fax. +31-1-261.62.89 Data Sheet Clarigard Filters High-performance filters for the clarification and prefiltration of process fluids Clarigard
More informationFlarelock II Tube Fitting
P/N 1030-199 REV. G 10/17 INSTRUCTION SHEET Flarelock II Tube Fitting Assembly procedures PRODUCT SPECIFICATIONS FlareLock II PFA nut maximum pressure rating chart TEMPERATURE 1 4" (FL4II-3) 3 8" (FL6II-3)
More informationPTFE PRESSURE REGULATOR
PTFE PRESSURE REGULATOR Our IPS PTFE Pressure Regulator is designed for use in high purity water and aggressive chemicals applications. Designed with a 100% virgin PTFE wetted flow path, the unit is ideal
More informationUltrahigh-Purity Fluoropolymer Diaphragm Valves
Ultrahigh-Purity Fluoropolymer Diaphragm s DRP Series 1 www.swagelok.com Ultrahigh-Purity Fluoropolymer Diaphragm s DRP Series Pneumatic and quarter-turn manual 2-way and 3-way models; pneumatic and manual
More informationIntegra Pneumatically Operated Valves
P/N 0-025696 REV. D 09/7 INSTRUCTION SHEET Integra Pneumatically Operated Valves ", 2-way, normally open, normally closed, sampling pneumatic designs; 4" 2-way, normally open, normally closed designs REPAIR
More informationNow available. in size. PrimeLocK Fittings. A premium PFA fitting for high-purity and corrosive chemical applications
Contamination Control Solutions PrimeLocK Fittings A premium PFA fitting for high-purity and corrosive chemical applications Now available in 1 1 4 size enabling clean, consistent leak-free connections
More informationNOWPak Bottle System. Delivering your critical materials with purity, safety, and process efficiency FEATURES & BENEFITS. Purity.
ADVANCED MATERIALS HANDLING NOWPak Bottle System Delivering your critical materials with purity, safety, and process efficiency The Entegris NOWPak Liner-Based Bottle System is a leading containment and
More informationTable of Contents - Vangard Filters
Vangard Filters 1 Table of Contents - Vangard Filters Materials of Construction 3 Dimensions 4 Operating Characteristics 5 Cartridge Installation Instructions 6 Autoclave Instructions 7 Inline Steam Sterilization
More informationIntegra Manually Operated Distribution Valves
P/N 01-025695 REV. D 08/17 INSTRUCTION SHEET Integra Manually Operated Distribution Valves 1", 2-way, multi-turn and sampling manual designs; 1 1 4" 2-way, multi-turn manual designs REPAIR INSTRUCTIONS
More informationUltrahigh-Purity Fluoropolymer Diaphragm Valves
www.swagelok.com Ultrahigh-Purity Fluoropolymer Diaphragm s DRP Series DuPont Teflon modified PTFE wetted parts and polypropylene actuator Meet SEMI Standard F57-0301 for ultrahigh-purity system components
More informationNOWPak Canister Dispense Connector
ADVANCED MATERIALS HANDLING NOWPak Canister Dispense Connector Thread-on stainless steel connector allows pressure or pump delivery of high-viscosity materials from NOWPak liner-based canister systems
More informationImprove Yield & Reduce Cost with Levitronix Bearingless Pumps!
Improve Yield & Reduce Cost with Levitronix Bearingless Pumps! Stop Your Pumps from Stealing Your Profits! BEARINGLESS PUMP SYSTEMS BPS-1 1.6 bar (23 psi) 21 liters/min (5.5 gallons/min) BPS-3 2.5 bar
More informationCR4 Discrete Valve and Manifold Valve Repair or Replacement Procedure
P/N 01-1012769 REV. F 07/18 INSTRUCTION SHEET CR4 Discrete Valve and Manifold Valve Repair or Replacement Procedure Entegris CR4 valves and manifold valves can be repaired or replaced in the event of valve
More informationInVue Electronic Flowmeter, Model NT4400
P/N 01-1036196 REV. B 01/17 InVue Electronic Flowmeter, Model NT4400 User Guide Table of Contents Safety Alert Symbol... 2 Introduction... 2 Installation... 3 Mechanical Installation... 3 Mounting Orientation...
More informationIntegra Pneumatically Operated Diaphragm Valves with Position Indication Option
P/N 030-208 REV. E 09/7 INSTRUCTION SHEET Integra Pneumatically Operated Diaphragm Valves with Position Indication Option 2", 2-way and adjustable bypass, normally closed, pneumatic designs REPAIR INSTRUCTIONS
More informationFilters. FW, F, and TF Series. Remove system particulate contaminants. Gas and liquid service. 1/8 to 1/2 in. and 3 to 12 mm end connections
s FW, F, and TF Series 1 www.swagelok.com s FW, F, and TF Series Remove system particulate contaminants Gas and liquid service 1/8 to 1/2 in. and 3 to 12 mm end connections Stainless steel and brass materials
More informationIntegra Pneumatically Operated Distribution Valves
P/N 01-1007275 REV. D 10/17 INSTRUCTION SHEET Integra Pneumatically Operated Distribution Valves 3 4", high-temperature, 2-way, normally open, normally closed pneumatic designs REPAIR INSTRUCTIONS For
More informationPrimeLock Fittings. A premium PFA fitting for high-purity and corrosive chemical applications FEATURES & BENEFITS APPLICATIONS
ADVANCED MATERIALS HANDLING PrimeLock Fittings A premium PFA fitting for high-purity and corrosive chemical applications Entegris has supplied innovative connection technology into the high-purity chemical
More informationUltra Clean Gas Filters Reference Guide ULTRA CLEAN GAS FILTERS
ULTRA CLEAN GAS FILTERS ULTRA CLEAN GAS FILTERS Table of Contents Ultra Clean Gas Filter s for GC and GC/MS...3 Triple Filter for MS/ECD/NPD... 3 Complete Triple Filter Bundle for FID...3 Complete Triple
More informationFlaretek Tube Fitting Heated Flare and Assembly Procedures
ADVANCED MATERIALS HANDLING INSTRUCTION SHEET Flaretek Tube Fitting Heated Flare and Assembly Procedures Insert installation instructions for 1 4", 3 8", 1 2", 3 4" and 1" sizes SPECIFICATIONS Maximum
More informationValve Solutions Series 150/160 and V-100 Valves
w w w. m k s i n s t. c o m Valve Solutions Series 1/160 and V- Valves High vacuum bellows sealed valves Features and enefits hoice of manual, pneumatic or electropneumatic actuation ngle and Inline body
More informationHYGIENIC CENTRIFUGAL PUMPS
Capacity to 900 GPM (210 M³/hr) Pressure to 190 PSI (13 Bar) Viscosity to 2,700 SSU (0 cps) Temperature to 380 F (195 C) HYGIENIC CENTRIFUGAL PUMPS TRA 0 Series TRA 0 Series Centrifugal Pump With its proven
More informationAluminum Dimensions: 7.32" W 9.49"H Net Wt.: 7.9 lbs. (3.6 kg) Shipping Wt.: 9.9 lbs. Stainless Steel
DP Series Specifications DP-10 Port Dimensions (6 GPM Max.) Intake & discharge connection: Polypropylene (PPG) 3/8" Female NPT Aluminum (ADC-12) 3/8" Female NPT Stainless Steel (316) 3/8" Female NPT DP-15
More informationMiniature Solenoid Valves
Miniature Solenoid Valves Our IPS Miniature Solenoid Valves offer precision performance under extreme conditions. Offered as 2-Way and 3-Way Valves with four internal body configurations and five seat
More informationGlass Tube Full-View Flowmeters
Data Sheet Brooks 1110 and 1140 Series Glass Tube Full-View Flowmeters Model 1110 Full-View Flowmeter (NPT Connections) Model 1140 Full-View Flowmeter (Flange Connections) FEATURES AND BENEFITS Wide choice
More informationPPM100 Owner s Manual
PPM100 Owner s Manual 187 E. 670 S., Kamas, UT 84036 435.783.6040 888.796.2476 https://wkfluidhandling.com Manuals available online at: wkfluidhandling.com/owners-manuals Manual Part #18200-LM-0001 Copyright
More informationDymension SG Manifold Valves Using Direct Mount Manifold Technology
P/N 01-023283 REV. B 07/18 INSTRUCTION SHEET Dymension SG Manifold Valves Using Direct Mount Manifold Technology Repair instructions for 710 series manifolds Manifold Assembly P2 P3 P5 REPAIR PROCEDURE
More informationStandard filter Disk filter Return filter. Lubrication systems can fail from the following
Filters For oil For use in SKF centralized lubrication systems Standard filter Disk filter Return filter Why filtering? Solids are diagnosed to be the main cause of damages on the components that are used
More informationJ Series Filters HIGH PRESSURE FILTERS. J88 Mini In-Line (Replaceable Filter) J85 Tee-Type. J82 Mini In-Line. J83 In-Line
J Series Filters HIGH PRESSURE FILTERS J Series Filters provide filtration of particulates in gas and liquid systems prior to pressure or flow control components. J Series Filters utilize a pleated, 0
More informationCheck Valves. C, CA, CH, CP, and CPA Series. Working pressures up to 6000 psig (413 bar) Adjustable and fixed cracking pressures
Check Valves C, CA, CH, CP, and CPA Series 1 www.swagelok.com Check Valves C, CA, CH, CP, and CPA Series Working pressures up to 6000 psig (413 bar) Adjustable and fixed cracking pressures Variety of end
More informationMiniature Multimedia Valves
2 Inert Isolation PTFE 3-Way Solenoid Valve Series 1 The Series 1 diaphragm type valve has a low internal volume and rapid response time, which enables users to get readings quickly for their analysis.
More informationPFD1/PFS1 OPERATING INSTRUCTIONS PUMP PFD1/PFS1 OPERATING INSTRUCTIONS
PUMP PFD1/PFS1 OPERATING INSTRUCTIONS SAINT-GOBAIN PERFORMANCE PLASTICS ASTI (Headquarters) SAINT-GOBAIN PERFORMANCE PLASTICS ASTI (Factory) 41, boulevard des Bouvets E.A.D.A.C. des Berthilliers F-92741
More informationPrimeLock Fittings. A premium PFA fitting for high-purity and corrosive chemical applications FEATURES & BENEFITS APPLICATIONS
ADVANCED MATERIALS HANDLING PrimeLock Fittings A premium PFA fitting for high-purity and corrosive chemical applications Entegris has supplied innovative connection technology into the high-purity chemical
More informationMillipore Express SHR Hydrophilic Filters
Data Sheet Millipore Express SHR Hydrophilic Filters Sterilizing-grade PES membrane for fast, efficient, economical filtration of cell culture media and mycoplasma removal Devices containing Millipore
More informationPlug Valves. P4T and P6T Series. Working pressures up to 3000 psig (206 bar) Swagelok tube fitting and NPT and ISO tapered pipe end connections
Plug Valves P4T and P6T Series 1 www.swagelok.com Plug Valves P4T and P6T Series Working pressures up to 3000 psig (206 bar) Swagelok tube fitting and NPT and ISO tapered pipe end connections 1/8 through
More informationDP Series Specifications
DP Series Specifications DP-10 Port Dimensions Intake & discharge connection: Polypropylene (PPG) Aluminum (ADC-12) Stainless Steel (316) (6 GPM Max.) 3/8" Female NPT 3/8" Female NPT 3/8" Female NPT DP-15
More informationVari-Disk Service. Inline disc filters to meet your needs. Inlet and outlet connectors. Filter housing
Inline Disc Filters Customised inline disc filtration for a wide range of applications Free bespoke sample production Wide variety of media and connector options Low production volumes at competitive prices
More informationAURORA 3500 SERIES MODEL 3550 ASME/ANSI B73.1 INDUSTRIAL PROCESS PUMPS
AURORA 3500 SERIES MODEL 3550 ASME/ANSI B73.1 INDUSTRIAL PROCESS PUMPS WWW.AURORAPUMP.COM INDUSTRIAL PROCESS PUMPS AURORA 3500 SERIES Model 3550 ASME/ANSI B73.1 Industrial Process Pumps Capacities to GPM
More informationCheck Valves. C, CA, CH, CP, and CPA Series. Working pressures up to 6000 psig (413 bar) Adjustable and fixed cracking pressures
Check Valves C, CA, CH, CP, and CPA Series Working pressures up to 6000 psig (413 bar) Adjustable and fixed cracking pressures Variety of end connections 316 stainless steel and brass materials Check Valves
More informationCartridge Filter Housings Nowata A Series
Cartridge Filter Housings Nowata A Series Customization May Change the Model Number Designation to B, D or F Series 1. Introduction All A series cartridge filter housings are designed for efficient liquid
More informationSpringless Diaphragm Valves (1.125 in.)
Springless Diaphragm Valves ( in.) DE Series 1 www.swagelok.com Springless Diaphragm Valves ( in.) For Modular Gas Systems DE Series in. C-seal and W-seal designs Available in two- and three-port configurations
More informationLab Specialty Products Technical Information TECHNICAL INFORMATION WEIGHTS & DIMENSIONS
Lab Specialty Products Technical Information TECHNICL INFORMTION WEIGHTS & DIMENSIONS Contact Spears for any Information not found. Page 569 Lab Ball s Sample Engineering Specification ll thermoplastic
More informationNDP-25 Specifications
NDP-25 Specifications Port Dimensions (46.2 GPM Max.) Intake & discharge connection: Polypropylene (PPG) Kynar (PVDF) Aluminum (ADC-12) Stainless Steel (316) Cast Iron Air inlet (incl. ball valve): Air
More informationSeries SMR Sanitary Stainless Steel Multi-Round Housing
Features: Aseptic Design Low Hold Volume Easy to use low point drain valve Benefits: No Dead Legs Fully Self draining Ease of filter change-out Removable for Cleanability Maximize Product Recovery Crevice
More informationFor high temperature and chemical applications, Varec recommends the extended service option which features Teflon or Viton O-ring and gasket.
GAS CONTROL VAREC 7100B Series PRESSURE RELIEF VALVES The 7100B Series is designed to protect low pressure storage tanks and systems from being over pressured. Introduction The Varec 7100B Series is a
More informationLogic elements. Differential pressure sensing elements for applications up to 350 bar (5000 psi) and 400 L/min (100 USgpm)
Hydraulic Screw-in Cartridge Valves (SiCV) Logic elements Differential pressure sensing elements for applications up to 50 bar (5000 psi) and 400 L/min (00 USgpm) Logic elements LOGC ELEMENTS... -4 APPLCATON
More informationPneutronics. Miniature Proportional Valves. Catalog PND-MPV-001/US January 2007
Pneutronics Miniature Proportional Valves January 2007 Non-Thermally Compensated Proportional Valve HF 200 Miniature Ultra High Flow Proportional Valve HF 200 is a high flow proportional valve that provides
More informationX100 Convertible Filter Housing and Accessories
X1 Convertible Filter Housing and Accessories Maximizing Filtration Efficiency Minimizing Downtime Reducing Filtration Costs FSI has been serving the industry for over 3 years and has earned an ISO 9 certification
More informationRP-CS 2-98 CERTA-SEAL LIQUID BAG FILTERS WITH THE MATCHED PERFORMANCE DESIGN. Products
RP-CS 2-98 CERTA-SEAL LIQUID BAG FILTERS WITH THE MATCHED PERFORMANCE DESIGN R Products INTRODUCING CERTA-SEAL LIQUID BAG FILTERS... A BETTER DESIGN RIGHT DOWN TO THE LAST NUT AND BOLT Plastic handles
More informationKalrez perfluoroelastomer parts for reliable, long-term sealing. in extreme chemical and thermal environments
Kalrez perfluoroelastomer parts for reliable, long-term sealing in extreme chemical and thermal environments FULL TRACEABILITY QUALITY ASSURED You can rely on Kalrez sealing solutions in the harshest processing
More informationNDP-50 Specifications
NDP-50 Specifications Port Dimensions Intake & discharge connection: (164 GPM Max.) Polypropylene (PPG) 2" ANSI B16.5 #150 Kynar (PVDF) 2" ANSI B16.5 #150 Aluminum (ADC-12) 2" ANSI B16.5 #150 (with tapped
More informationPolygard -CN Filters. Lenntech Tel Fax
Data Sheet Polygard -CN Filters Versatile pleated ilters for the clariication and preiltration of process luids Lenntech info@lenntech.com www.lenntech.com Tel. +31-1-261.9. Fax. +31-1-261.62.89 Polygard
More informationAURORA Series MODEL 3560 ASME/ANSI B73.1M INDUSTRIAL PROCESS PUMPS
AURORA 3500 Series MODEL 3560 ASME/ANSI B73.M INDUSTRIAL PROCESS PUMPS WWW.AURORAPUMP.COM AURORA 3500 Series Model 3560 ASME/ANSI B73.M Industrial Process Pumps Capacities to 7000 GPM (590 m 3 /hr) Heads
More informationIntegrated Process Solutions. Series 88. CF Component Ultra high vacuum fittings Sizes 1 1/3'' to 4 5/8''
Integrated Process Solutions w w w. m k s i n s t. c o m Series 88 CF Component Ultra high vacuum fittings Sizes '' to '' Manufactured by MKS to industry standards, Series 88 components are a full line
More informationSV9A-10-E - Solenoid Valve 4-way, 3-position spool type solenoid valve Up to 36 L/min (9.5 USgpm) 210 bar (3000 psi)
SV9--E - Solenoid Valve -way, -position spool type solenoid valve Up to 6 L/min (9.5 USgpm) bar ( psi) () () (P) (T) In the de-energized position all ports are closed. When solenoid '' is energized flow
More informationIntegrated Flow Controller, Model NT6500
P/N 1223 REV. H 02/17 Integrated Flow Controller, Model NT6500 User Guide Table of Contents Introduction... 2 Identifying Non-standard Product Configurations... 2 Principle of Operation... 2 System Block
More informationPneumatic Valves. Rometec srl Rometec srl Rometec srl -
Pneumatic Valves Miniature Pneumatic Diaphragm Valves Our IPS Miniature Pneumatic Diaphragm Valves offer precision performance under extreme conditions. Offered as 2-Way and 3-Way Valves with six internal
More informationquick couplings HQC Series Instrumentation Quick Couplings Typical Applications Features & Benefits Technical Data
HQ Series Instrumentation Quick ouplings Typical pplications Laboratories University labs Gas distribution iopharmaceutical Technical Data ONSTRUTION 36 Stainless steel* NOMINL FLOW SIZES /4, 3/8, / MXIMUM
More informationSample Probe Module. Application Guide
Sample Probe Module Application Guide A Swagelok Pre-Engineered Subsystem Pre-engineered subsystems available in weeks, not months. Field-tested design ensures optimum system performance. Wide range of
More informationMODEL 106F TEFLON LIQUID FLOW SENSOR
TEFLON LIQUID FLOW SENSOR [ Advanced microturbine design for repeatable results - with no particle shedding & no zero drift [ Compatible with solvents, deionized water, acids, CMP slurries, etc. [ Extremely
More informationTELEDYNE HASTINGS INSTRUMENTS
TELEDYNE HASTINGS INSTRUMENTS MODELS HFM-D-3 & 305 HFC-D-3 & 307 FEATURES Flows from 0-25 slm (N2 Equivalent) up to 0-2500 slm (N2 Equivalent) Accuracy in Nitrogen (0.2% of Full scale + 0.5% of Reading)
More informationManifold and Isolation Valve Mounting System for Direct Mounting DP Transmitters
ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS for Direct Mounting DP Transmitters Introduction The Anderson Greenwood SaddleMount has been developed to overcome the problems associated with traditional transmitter/manifold
More informationFPK04 Max Flow: 100 gpm (379 lpm)
HIGH PRESSURE FILTERS In-Line Cartridge Filters Working Pressures to: 4350 psi 30,015 kpa 300 bar Rated Static Burst to: Flow Range To: 9135 psi 63,000 kpa 630 bar 100 gpm 379 lpm Features The T-type ported
More informationFLOW CONTROLLERS Instrument/Analyzer Products. Catalog 4513/USA April 2003
FLOW CONTROLLERS Instrument/Analyzer Products Catalog 4513/USA April 2003 FLOW CONTROLLERS Instrument/Analyzer Products Catalog 4513/USA April 2003 table of contents SC420 Series............. 1-2 SC423XL
More informationSANITARY CENTRIFUGAL PUMPS TRA 400 Series
Capacity to 0 GPM (70 M³/hr) Pressure to 135 PSI (9.3 Bar) Viscosity to 2,700 SSU (600 cps) Temperature to 380 F (195 C) SANITARY CENTRIFUGAL PUMPS TRA 400 Series The TRA 400 Series The reliability of
More informationINVUE INTEGRATED FLOW CONTROLLERS, MODELS NT6510, NT6520. User guide
P/N 01-1032525 (Rev. A 09/15) CRITICAL MATERIALS HANDLING INVUE INTEGRATED FLOW CONTROLLERS, MODELS NT6510, NT6520 User guide Table of Contents Introduction... 2 Identifying Nonstandard Product Configurations...
More informationdouble stationary environmental cartridge mechanical seals f4s200 TM & ANSI+ f4s200 TM series
double stationary environmental cartridge mechanical seals f4s200 TM & ANSI+ f4s200 TM series 4seals plc, mount street, bradford, west yorkshire. bd3 9sn united kingdom Tel: +44 (0) 1274 720775 Fax: +44
More informationSpray Pressure Control Manifold
Instruction Sheet P/N 0870G0 WARNING: Allow only qualified personnel to perform the following tasks. Follow the safety instructions in this document and all other related documentation. Introduction The
More informationCR8 Manual Multi-turn Valve
P/N 01-101142 REV. C 09/18 INSTRUCTION SHEET CR8 Manual Multi-turn Valve Repair instructions INSTRUCTIONS CR8 manual multi-turn valves including all media end connections. CAUTION! Remove any pressurized
More informationS, M, L, and 31 Series. Straight-pattern flow coefficients (C v ) from to Low- and high-pressure service
www.swagelok.com Metering Valves S, M, L, and Straight-pattern flow coefficients (C v ) from 0.004 to 0.16 Low- and high-pressure service Repeatable vernier handles available rass and 316 stainless steel
More informationHY-PRO FILTRATION. FSL Filter Unit Flow rate up to 22 gpm (83 lpm)
HY-PRO FILTRATION Materials of Construction Assembly Frame: Painted Steel Drip Pan: Painted Steel Filter Assembly: Epoxy coated steel 25 or 50 psid bypass available True differential pressure indicator
More informationSTRONG IN THE WIND GREATER SAFETY AND EFFICIENCY FILTER SYSTEMS FOR WIND POWER SYSTEMS
STRONG IN THE WIND GREATER SAFETY AND EFFICIENCY FILTER SYSTEMS FOR WIND POWER SYSTEMS SYSTEMS PARTNER FOR FILTRATION IN WIND POWER SAFE AND Pitch system Azimuth drive Brake system Gearbox 1 3 4 5 2 6
More informationFulflo PCC Filter Cartridge
C - 2 0 2 0 Fulflo PCC Filter Cartridge Unique Cartridge Construction Improves Particle Retention, Service Life and Flow Rates Parker Fulflo Pleated Cellulosic Cartridges meet a broad range of critical
More informationAir Powered Double Diaphragm Pumps
Air Powered Double Diaphragm Pumps Notes. TC-X 030 Series Standard Diaphragm Pumps with 1/4" Connections Liquid Flow Rate: Maximum Air Inlet Pressure: Wetted Body Material Options; 1 to 8 L/min. (2.14
More informationANDERSON GREENWOOD M4AP/M4TP STATIC PRESSURE MANIFOLDS
ANDERSON GREENWOOD M4AP/M4TP STATIC PRESSURE MANIFOLDS Block and bleed, two valve manifolds with indirect and direct mount capabilities for static pressures to 6000 psig (414 barg) FEATURES GENERAL APPLICATION
More informationHexagonal Bar Stock Needle Valve
Hexagonal Bar Stock Needle Valve HBNV Series Features Maximum working pressure: 6000 psi (414bar) at 100 F (38 C) 10000 psi (690bar) at 100 F (38 C) Working temperature: -65 F (-54 C) to 464 F (240 C)
More informationSelection Guide Ultipleat High Flow Filter System
Element Data Sheet GDS 131a Selection Guide Ultipleat High Flow Filter System Description The Ultipleat High Flow filter is a large diameter, coreless, single open ended, pleated cartridge with an inside
More informationSpray Pressure Control Manifold
Instruction Sheet P/N 0870-0 WARNING: Allow only qualified personnel to perform the following tasks. Follow the safety instructions in this document and all other related documentation. Introduction The
More informationUltra-Matic Air Valve System
Ultra-Matic Air Valve System Efficient Pumps, Competitive Upgrades and Accessories U2 Plastic Pumps Metallic Pumps Specialty Pumps Upgrade Kits Accessories Diaphragms Ultra-Matic Air Valve Technology Simple.
More informationMerkur. High Performance Fine Finish Packages
High Performance Fine Finish Packages Advanced Technology. Superior Performance. The new and improved packages are designed to outperform and outlast other pumps in their class. With more models and configurations
More information