Directional Control Valves Accessories
|
|
- Daniel Porter
- 5 years ago
- Views:
Transcription
1 Plugs Description Plug EN *, style AF Protection class IP 65 for voltages up to 50V Plug with LED V DC Plug with lamp insert 10V AC Plug with lamp insert 30V AC Cable connection PG 9 PG 11 PG 11 Figure circuit Fig. 1 black (B) Order No. grey (A) Fig. 1 and Fig. 1 and Plug with LED V DC and suppressing circuit Fig. 1 and Plug with rectifier: Bridge-type rectifier with silicon diodes. Varistors are used to protect the diodes against power surges from the power supply up to 50V AC. PG 11 Fig. 1 and Plug with cable strain relief and transparent cover Fig Inserts for plug and Cicuit Order No. Bridge-type rectifier up to 50V AC Bridge-type rectifier with lamp 50V AC * (New) EN corresponds to (old) DIN Fig. 1 Fig. Fig. 3 Fig. Fig. 5 Fig. 6 Fig. 7 Fig. 8 Plug M1x1, Order No.: The angled plug for M1x1 is a 5-pin design. The connections in the plug can be screwed in. The plug can be turned x 90. Plug kit -pin Junior Timer (AMP) Order no. Number of plugs in 1 kit K K K K access0_uk.indd CM -107
2 Actuator Kits Solenoid kit (displayed: ) A solenoid kit contains tube, coil, retainer and seals for the solenoid. Coil kit A coil kit contains coil, retainer and seals for the coil. For standard Solenoid kits: AK--S-... (Soft shift on request) (Example: AK--S-JW-75) without manual override ( T ) with 10bar tank pressure ( H ) 1V= K KW-75 KWT-75 KW-75 V= J JW-75 JWT-75 JW-75 98V= U UW-75 UWT-75 UW-75 05V= G GW-75 GWT-75 GW V/50Hz / 10V/60Hz Y YW-70 YWH-70 30V/50Hz / 0V/60Hz T TW-70 TWH-70 Coil kits: AK--C-... (Example: AK--C-JW-75) 1V= K KW-75 V= J JW-75 98V= U UW-75 05V= G GW V/50Hz / 10V/60Hz Y YW-70 30V/50Hz / 0V/60Hz T TW-70 8 Watt Solenoid kits: AK--S-... M1x1 DESINA ( DLJ5 ) Coil kits: AK--C-... M1x1 DESINA ( DLJ5 ) V= J JWL-75 JDLJ5-75 JWL-75 JDLJ5-75 1V= V= 98V= 05V= 110V/50Hz 10V/60Hz 30V/50Hz 0V/60Hz Solenoid kits: AK--S-... (Soft shift on request) (Example: AK--S-JW-30) K J U G KW-30 JW-30 UW-30 GW-30 without manual override ( T ) KWT-30 JWT-30 UWT-30 GWT-30 with 10bar tank pressure ( H ) KW-30 JW-30 UW-30 GW-30 KW-30 JW-30 UW-30 GW-30 Coil kits: AK--C-... without manual override ( T ) Y YW-30 YWH-30 YW-30 T TW-30 TWH-30 TW-30 Other solenoids, coil kits and tube kits on request. KWT-30 JWT-30 UWT-30 GWT-30 access0_uk.indd CM -108
3 O-Rings and Seal Kits O-rings to seal between valve and mounting surface Valve size Valve series Ports Dimensions inner Ø x section Ø Quantity 1) DIN NG 6 DIN NG10 D1 D3 9.5 x x x x DIN NG 16 D 1.89 x x 1.78 DIN NG 5 D8 9.8 x x.6 DIN NG 5 D x x.6 DIN NG 3 D x x ) Number per set Seal kits (connecting surface and inner seals) Valve series D**W Solenoid D**P Hydr. D*L/LB Hand lever Material NBR FPM NBR FPM NBR FPM Order code for valve size D1 D3 D31DW D D8 D9 D V70 D1VP-70 D1VP-V70 D1DL-77 D1DL-V V30 D3DP-35 D3DP-V35 D3DL-35 D3DL-V35 D31DW-75 D31DW-V75 D1VW-70 D1VW-V70 D1VW-70 D1VW-V70 DL-60 DL-V60 D81VW-70 D81VW-V70 D91VW-70 D91VW-V70 D91VW-70 D91VW-V70 D9L-60 D9L-V60 D111VW-70 D111VW-V70 D111VW-70 D111VW-V70 access0_uk.indd CM -109
4 Slip-In Orifices Slip-in orifice for P, A, B port of directional control valves NG6 and NG10 DK Orifice kit Size Orifice size Size NG6 NG10 Orifice Ø NG6 NG10 00 without orifice x x mm x mm x x mm x mm x x mm x 1 1. mm x x 1 1. mm x x mm x x mm x mm x 0.0 mm x x 5.5 mm x x mm x 5.5 mm x Package size: Each kit contains 10 orifice of the same size. Dimensions NG6 NG10 access0_uk.indd CM -110
5 Mounting Patterns Size 6, mounting pattern to DIN 30-A6 Size 10, mounting pattern to DIN 30-A10 Size 16, mounting pattern to DIN 30-A16 With * marked dimensions ± 0.1mm. All other dimensions ± 0.mm. Subplates and manifolds see accessories. access0_uk.indd CM -111
6 Mounting Patterns Size 5, mounting pattern to DIN 30-A5 Size 3, mounting pattern to DIN 30-A3 With * marked dimensions ± 0.1mm. All other dimensions ± 0.mm. Subplates and manifolds see accessories. access0_uk.indd CM -11
Chapter 2: Directional Control Valves
Contents Chapter : Directional Control Valves Series Description Direct operated Pilot operated Page DIN / ISO 06 10 16 5 3 10 16 5 3 Seat valves, electrically operated D1SE - Spool valves, electrically
More informationDirectional Control Valve Series D3W Soft Shift
Characteristics The D3W is a 3-chamber, electrically controlled 4/3 or 4/ way directional control valve. It is activated directly by solenoids with screwed in wet pin armature. The soft shifting of this
More informationPilot Operated Directional Control Valves Series D1VP, D3DP, D4P, D9P, D11P
Characteristics Series D1VP, D3DP, D4P, D9P, D11P The D1VP is a hydraulically controlled 4/3 or 4/ way directional control valve. The valve can be operated either by the pilot ports X and Y via the subplate
More informationSeries P directly operated solenoid valves
> Series P solenoid valves CATALOGUE > Release 8.7 Series P directly operated solenoid valves 3/-way NC and NO. The solenoid valves can be mounted on a single base (with M5 ports) as well as on manifolds
More informationPilot Operated Directional Control Valves Series D31DW, D41VW - D111VW
Characteristics The D31, D41, D81, D91 and D111 are electrically controlled 4/3 or 4/ way directional control valves. The valves are pilot operated by an NG6 valve. Pressure and flow of the pilot oil have
More informationPilot-Operated Directional Control Valves Series D3 - D11
Catalogue HY11-500/UK Characteristics The D31, D41, D81, D91 and D111 are electrical controlled 4/3 or 4/ way directional control valves. The valves are pilot-operated by an NG6 valve. Pressure and flow
More informationPilot Operated Directional Control Valves Series D31DW, D31NW, D*1VW
Characteristics The pilot operated valves are available in 4 sizes: D31DW NG10 (standard) D31NW NG10 (high flow) D41VW NG16 D81VW NG5 (for port diameter up to 6 mm) D91VW NG5 (for port diameter up to 3
More informationSeries PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.7 Series PD directly operated solenoid valves New /-way Normally Closed (NC) Note: all Series PD /-way solenoid valves are basically in DC. To operate
More information3/2-way Solenoid Valve for pneumatics
656 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Type 656 can be combined with... Fast response times Type 506 Type 510/511
More informationDirectional Control Valve Series D1VW
Characteristics The NG6 directional control valve series D1VW provides high functional limits up to 8 l/min in combination with a very low, energy-saving pressure drop. A wide variety of spool options
More informationDirectional Control Valve
Characteristics The NG6 directional control valve series D1VW provides high functional limits up to 8 l/min in combination with a very low, energy-saving pressure drop. wide variety of spool options allows
More informationSeries PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.8 Series PD directly operated solenoid valves /-way - Normally Closed (NC) Please note that all Series PD solenoid valves are supplied with direct current
More informationDirectional Control Valve Series D3W (Parker), 4D02 (Denison)
Characteristics Series D3W (Parker), 4D0 (Denison) The direct operated directional control valve size NG10 is available with both Parker (series D3W) and Denison (series 4D0) model codes. Both series are
More informationELECTRIC COMPONENTS HYDRAULIC COMPONENTS
ELECTRIC COMPONENTS HYDRAULIC COMPONENTS T E C H N I C A L C A T A L O G CONTENT Hydraulic components - Electric and electronic components ELECTRIC AND ELECTRONIC COMPONENTS PRESSURE SWITCHES 5 Pressure
More informationDirectional Control Valve Series 4D01 (DENISON)
Characteristics The Denison series 4D01 is a solenoid operated directional control valve size NG06 in -chamber design. It is direct operated by wet pin solenoids. The 4D01 is available with a Soft Shift
More informationRPE3-04. Functional Description HA /2010. Directional Control Valves Solenoid Operated. Replaces HA /2007
Directional Control Valves Solenoid Operated RPE3-04 Size 04 (D 02) 320 bar (4600 PSI) 30 L/min (8.0 GPM) 10/2010 Replaces 12/2007 4/3-, 4/2- way directional control valves with solenoid control Solenoids
More informationDIRECTIONAL CONTROL VALVE SOLENOID OPERATED TYPE HD3-ES-*-/10 CETOP MPa HD3 - ES - (1) (C) - * - (024C) (-) / 10
table HD-0/ (07/0) DIRECTIONAL CONTROL VALVE SOLENOID OPERATED TYPE HD-ES-*-/0 CETOP 0-5 MPa /5 HOW TO READ THE MODEL CODE FOR HD-ES - Pressure 5 MPa (50 bar) HD - ES - () (C) - * - (0C) (-) / 0 5 6 7
More informationDIRECTIONAL CONTROL VALVES CETOP 3/NG6
CETOP 3/NG06 STANDARD SPOOLS CH. I PAGE 0 AD.3.E... CH. I PAGE AD.3.E...J* CH. I PAGE 2 AD3.XS... CH. I PAGE 3 AD3.XD... CH. I PAGE 4 AD.3.V... CH. I PAGE 5 AD.3.L... CH. I PAGE 6 OTHER OPERATOR CH. I
More information6/2 WAY DIRECTIONAL VALVE KV (NG 6)
6/2 WAY DIRECTIONAL VALVE KV (NG 6) NG 6 Up to 350 bar [5 076 PSI] Up to 50 L/min [13.2 GPM] Plug-in connector for solenoids to ISO 4400. Threaded connections to ISO 9974 (Metric), ISO 1179 (BSPP/Gas),
More informationSérie D3 Válvula Direcional CETOP 5 e NG 10. Catálogo HY /US
Série D3 Válvula Direcional CETOP 5 e NG 10 Catálogo HY14-2502/US Catalog HY14-2502/US Introduction pplication Series D3 hydraulic directional control valves are high performance, direct operated 4-way
More informationChapter 6: Check Valves
Contents Chapter : Check Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 0 10 1 25 32 Subplate Screw-in Slip-in SSR RK / RB CS SPZBE SPV / SPZ C4V CPS C4V D4S
More informationDIRECTIONAL CONTROL VALVES CETOP3
DIRECTIONAL CONTROL VALVES CETOP3 GENERAL DESCRIPTION RH0...1-...F... Document: DCVC3-1-Aug 2013 4/3- and 4/2- way directional control valves with solenoid operation, heavy duty construction RH0...1-...F...
More informationSeated valves 500 bar
Seated valves 500 bar Type WVM-6I Features Solenoid actuated and direct operated Leakage free in every direction (double tight) High operational safety and reliable switching High duty cycles and long
More informationCOILS AND CONNECTORS. Atlantic Fluid Tech SECTION 21. Rev. 10/ Connector Page class
SECTION 21 COILS AND CONNECTORS Type Heat insulation Connector Page class Coil M7 HS M7 - For solenoid operated cartridge valve H - 1 C EN 175301-3 - DIN 450 - ISO 4400 21.00.010 Coil M7 HS M7 - For solenoid
More informationDIRECTIONAL CONTROL VALVES CETOP3
DIRECTIONAL CONTROL VALVES CETOP3 CONTENTS: RH06...1 - electrical control... RH06...2 - hydraulic control... Page 1/17...7/17 8/17...9/17 RH06...4 - mechanical control RH06...6 - pneumatic control......
More informationCommon wiring modules can be connected by fieldbus, multi-pole or common earth/neutral modules.
/ and 4/ multi-way valves; servo assisted; DN 4; flow rate: l/min.; /8, legris ø 6 mm port connections Advantages / Benefits Optimised system solutions due to high level of modularity Compact design with
More information2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm
2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm Lockable manual override as standard For liquid, gaseous and aggressive media Long service life, even in non-lube conditions
More informationInformation 3 Form A 4 Industrial Form Type B 12 Form B 16 Form C 18 Micro Type C 22
TABLE OF CONTENTS Connectors Information 3 Form A 4 Industrial Form Type B 12 Form B 16 Form C 18 Micro Type C 22 Function Fittings Information 26 Flow Controls 27 Pilot Operated Check Valves 28 Pressure
More informationElectrically operated valves Series MF-04 for manifold mounting, 5/2- and 5/3-way G1/8 360 Nl/min (0.366 Cv)
Series MF-04 for manifold mounting, 5/2- and 5/3-way G1/8 360 Nl/min (0.366 Cv) Order code MF-04-510-HN-442 Series and function (plug pins on top, see pictures) 441 = 12 V DC without plug socket 442 =
More informationPilot Operated Pressure Relief Valve Series R5V (Denison)
Characteristics Pilot operated pressure relief valves series R5V have a similar design to the subplate mounted R4V series. The SAE flanges allow to mount the valves directly on the outlet flanges of pumps
More informationChapter 5: Flow Valves
Catalogue HY11-300/UK Contents Chapter : Flow Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/4 3/8 1/2 3/4 1 06 10 16 Throttle valves, manual adjustment MVI -2 NS -4 FS With free
More informationNG6. Proportional adjustment. Manifold mounting acc. to ISO External drain. Main stage spool type valve. Pilot stage seated type valve.
Catalog HY14-255/US Technical Information Series VY*K General Description Series VY*K pilot operated sequence valves feature proportional adjustment and an external drain. The external drain allows application
More informationChapter 10: Valves for Pipe Mounting
Contents Chapter : Valves for Pipe Mounting Series Description Size Body Page DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 1¼ 1½ 2 L-port T-port Pressure valves, manual operation R4V R4R Pressure relief function Pressure
More informationChapter 6: Check Valves
Contents Chapter : Check Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 0 10 1 25 32 Subplate Screw-in Slip-in Shuttle valves SSR -2 Check valves, direct operated
More informationSymbol RH F... GENERAL DESCRIPTION. 4/3- and 4/2- way directional control valves with solenoid operation, heavy duty construction
GENERAL DESCRIPTION List: RH06-1F-1-July 016 4/3- and 4/- way directional control valves with solenoid operation, heavy duty construction Removable AC and DC voltage coils-quick replacement and rotation
More informationRPEW4-06. Functional Description HA /2005. Solenoid Operated Directional Control Valves with Wirebox 1/2 NPT 1/2 NPT. Replaces HA /2004
Solenoid Operated Directional Control Valves with Wirebox RPEW4-06 2/2005 Size 06 p max up to 320 bar Q max up to 80 L/min Replaces 2/2004 4/3, 4/2 way directional control valves Four-land spool - reduced
More informationDP_T Limit Switches. Double Insulation Plastic Casing IP65-50 mm. width. T1 - Plain plunger T10: nylon plunger T11: metal plunger 0,5 15 /
DP: two cable inlets for M16 x Cable Gland DP5: two cable inlets for M2 x Cable Gland Plastic Casing IP65-5 mm. width T1 - Plain plunger T1: nylon plunger T11: metal plunger T1 - Roller plunger T12: metal
More informationCartridge Valves Technical Information Directional Valves DCV 03
OVERVIEW DCV 03 directional control valves consist of: housing (1), control spool (5), with two centering springs (4), and cylindrical operating solenoids (2, 3). The three-position directional valves
More informationSOLENOID VALVES AND PNEUMATIC VALVES
S E R I E S P Directly operated mini-solenoid valves Series P 3/ way N.C. or N.O. Ports M5 (for single base) Cartridge ø 3 and 4 (for manifold) Note: All the serie P electrovalves are basic in DC. For
More informationRPEW4-10. Functional Description HA /2012. Solenoid Operated Directional Control Valves with Wirebox. Replaces HA /2006
Solenoid Operated Directional Control Valves with Wirebox RPEW-10 5/2012 Size 10 (D 05) 350 bar (5076 PSI) 10 L/min (37 GPM ) Replaces 2/2006 /3, /2 way directional control valves Four-land spool - reduced
More informationProportional Pressure Relief Valve Series RE*T
Characteristics The pressure relief valve series RE*T have a proportional solenoid operated pilot stage with integrated electronics and a cartridge main stage. Features Pilot-operated pressure relief valve
More informationDL /118 ED SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT VERSION SUBPLATE MOUNTING ISO p max 280 bar Q max 50 l/min
41 211/118 ED DL3 SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT VERSION SUBPLATE MOUNTING ISO 4401-03 p max 280 bar Q max 50 l/min MOUNTING SURFACE OPERATING PRINCIPLE ISO 4401-03-02-0-05 (CETOP
More informationPressure Control Valves Series R. General Description. Specifications. Flow Data
Catalog Y14-2502/US Technical Information Series R General Description Series R direct relief valves limit system pressure by opening to tank when system pressure reaches the valve setting. Specifications
More informationDirectional Control Valves. General Description. Features. Specifications
Technical Information General Description directional control valves are high-performance, 4-chamber, direct operated, wet armature, solenoid controlled, 3 or 4-way valves. They are available in 2 or 3-position
More informationVacuum applications possible (up to 100kPa) Base mounted. Cylinder bore size (mm) Series CM2. Pressure: 0.5MPa Load ratio: 50% Cylinder stroke: 300mm
4 Port Direct Operated Poppet Solenoid Valve Series D1000 High speed coil with stable response times ON: 4ms, OFF: 2ms, Dispersion accuracy: ±1ms (With light and surge voltage suppressor at a supply pressure
More informationType Modular Water Valve System servo-assisted; variable and extendable. 2/2 way; DN mm; 1 up to 7 bar Advantages / Benefits
2/2 way; DN 10-13 mm; 1 up to 7 bar Advantages / Benefits Reduction of Cost of Ownership up to 60% Modular system design Block assembly by lock technology Easy change between distributing and collecting
More informationunrestricted; preferably with coil at bottom (auto. air bleed) 12 or 24 Volt DC from an electronic controller Deutsch plug - IP67
3 Technical data General characteristics Design Flow direction Seals De-energized position Mounting attitude Description, value, unit line mounting P A controlled P R surplus flow discharge (models shown
More informationNG06. General Size NG6 NG10 Design
Catalog HY14-255/US Series VY*K General Series VY*K pilot operated sequence valves feature proportional adjustment and an external drain. The external drain allows application as both a sequence valve
More information20 l/min (5 GPM) p max. Technical Features
Proportional Directional Control Valve, with Analogue Control Electronics PRM2-0 Functional Description Size 0 (D02) Q max 20 l/min (5 GPM) p max 320 bar (600 PSI) Technical Features Direct acting, proportional
More informationSD3E-B2. Functional Description. 2/2 Way Solenoid Operated Directional Control Valves Poppet Type HA /2012. Replaces HA /2010
/ Way Solenoid Operated Directional Control Valves Poppet Type SD3E-B 7/8-4 UNF p max 40 bar (609 PSI) Q max 75 L/min (9.8 GPM) H 4063 7/0 Replaces H 4063 0/00 / way cartridge valves solenoid operated
More informationMulti Way Valves for Pneumatics Servo Assisted, Extendable, 10mm Wide
Multi Way Valves for Pneumatics Servo Assisted, Extendable, 10mm Wide 3/2 and 5/2 Way Valves Optimum system solutions due to high level of modularity Maintenance free and little wear due to high level
More informationCOILS DELTA POWER COMPANY
COILS COMPANY Section / Description page COIL DATA... CD3 IMMERSION PROOF... CD16 GENERAL CARTRIDGE VALVE INSTALLATION NOTES... CD19 CAD INSERTION CODES - 2D... CD20 CAD INSERTION CODES - 3D... CD22 Page
More informationRPE3-04. Functional Description HA /2013. Directional Control Valves Solenoid Operated. Replaces HA /2010
Directional Control Valves Solenoid Operated RPE3-04 Size 04 (D 02) 320 bar (4600 PSI) 30 L/min (8.0 GPM) HA 4014 09/2013 Replaces HA 4014 10/2010 4/3-, 4/2- way directional control valves with solenoid
More informationSolenoid Valves & Accessories. Incorporating Solenoid Valves in. Custom Products. Solenoid Operated. Custom Products
PNEUMADYNE, INC. Catalog 24 Phone 763-559-177 Fax 763-559-547 Incorporating Solenoid Valves in Custom Products For over 3 years, manufacturers have relied on Pneumadyne for innovative solutions to their
More informationSeries MI-01, MI-02, MI-03
Valves > standardized valves > electrically operated > Series MI-01, MI-02, MI-03 ISO 99/1, Size 1 to 3 Technical details Series Connection MI-01, MI-02, MI-03 ISO 99/1 Nominal size Temperature range Medium
More informationElectrically operated spool valve. The manual override is detent and is operated by screw driver.
Valves > electrically operated valves > Series M-07 Technical details Connection G1/ Nominal size Temperature range Medium Series M-07 page Materials 9 mm -10 C... +70 C Filtered, oil-free and dried compressed
More information2/2-way Solenoid Valve with servo diaphragm
2/2-way Solenoid Valve with servo diaphragm Type 5282 can be combined with... Pivoted armature pilot drive with manual override Magnetic drive completely isolated from fluid by diaphragm Circuit function
More information2/2 or 3/2 way direct acting rocker solenoid valve
2/2 or 3/2 way direct acting rocker solenoid valve With isolating diaphragm Ultra low dead volume Type 6126 can be combined with... High back-pressure tightness Normally closed, normally open or universal
More information40 l/min (11 GPM) p max
Proportional Directional Control Valve, with Analog Control Electronics PRM2-06 Functional Description Size 06 (D03) Q max 40 l/min (11 GPM) p max 350 bar (5100 PSI) Technical Features Direct acting, proportional
More informationRemote Process Actuation Control System AirLINE - Rockwell 1734 Point I/O System
Remote Process Actuation Control System AirLINE - Rockwell 1734 Type 8644 can be combined with... Fully compatible with Rockwell 1734 Point I/O System Combination of Fieldbus, pilot valves and I/O modules
More informationMotorised Valve Range
Motorised Valve Range Contents Motorised Valves... 2 Fail Safe Motorised Valves for Bio Diesel and Bio Fuels... 2 Fail Safe Motorised Valves... 3 Motor-Open Motor-Close... 6 Electro-Thermal Links... 9
More information2/2-way Miniature Solenoid Valve
2/2-way Miniature Solenoid Valve Direct-acting can be combined with... 0... 21 bar DN 1.2... 2.4 mm M5, G1/8 and sub-base 21 mm coil spacing when mounted on manifold Type 2506 Cable plug to DIN EN 175301-803*
More informationGEMÜ 205 Electrically operated solenoid valve
Electrically operated solenoid valve Features Hermetic separation between medium and actuator In case of power failure operation possible by manual override Standard integral optical position indicator
More informationNO (normally closed) type Common supply type (port C pressurization) MPa MPa MPa C C
Direct acting port solenoid valve, manifold and actuator (general purpose valve) NO (normally closed) type Common supply type (port C pressurization) Manifold circuit structure Common specifications B
More information3/2 Way Valve G1/8. Data Sheet No E. Characteristics Symbol Unit Description General Features Spool valve.
AP64E00DX00X Characteristics to VDI 90 Pressures quoted as gauge pressure Characteristics Symbol Unit Description General Features Spool valve Mounting screws M Tube connection Thread Port size ; 7.4 deep
More informationDirectional Control Valves. Application. Features. Operation. D3W Solenoid Operated Conduit Cavity Style. D3W Solenoid Operated Hirschmann (DIN) Style
Catalog HY14-2500/US Introduction pplication Series D3 hydraulic directional control valves are high performance, direct operated 4-way valves, available in 2 or 3-position. hey are manifold mounted which
More informationServo-operated 2/2-way solenoid valves Type EV220A
Data sheet Servo-operated 2/2-way solenoid valves Type is a compact servo-operated 2/2-way solenoid valve program, especially designed for use in machines and equipment with limited space. Features and
More informationDirectional spool valves, direct operated, with solenoid actuation. Type WE
Directional spool valves, direct operated, with solenoid actuation Type WE RE 23178 Edition: 2013-06 Replaces: 04.09 Size 6 Component series 6X Maximum operating pressure 350 bar [5076 psi] Maximum flow:
More informationDirectional spool valves, direct operated, with solenoid actuation. Type WE. Features. Contents. RE Edition: Replaces:
Directional spool valves, direct operated, with solenoid actuation Type WE RE 23340 Edition: 2015-07 Replaces: 2013-06 Size 10 Component series 5X Maximum operating pressure 350 bar [5076 psi] Maximum
More informationDirectional spool valves, direct operated, with solenoid actuation. Type WE. Contents. Features. RE Edition: Replaces:
Directional spool valves, direct operated, with solenoid actuation Type WE RE 23340 Edition: 2013-06 Replaces: 2012-06 Size 10 Component series 5X Maximum operating pressure 350 bar [5076 psi] Maximum
More information3/2-way Solenoid Valve, direct-acting, NC or NO
3/2-way Solenoid Valve, direct-acting, NC or NO Electrical connection cable plug, Form A With or without manual override as standard Threaded port and sub-base s Impulse optional Type 6014 can be combined
More informationDirectional spool valves, direct operated, with solenoid actuation. Type WE. Features. Contents
Directional spool valves, direct operated, with solenoid actuation Type WE H7564 Features 4/3, 4/2 or 3/2 directional design High-power solenoid Porting pattern according to DIN 24340 form A Porting pattern
More informationScrew-in RTD temperature probes with plug connector
Data sheet 902040 Page 1/6 s with plug connector Temperature range from -50 to +270 C Shakeproof design Application areas: utility vehicles, construction and agricultural machinery, motors, compressors
More informationIntroduction. Pressure drops
Directional control valves CETOP 5/NG0 Introduction The ARON directional control valves NG0 designed for subplate mounting with an interface in accordance with UNI ISO 440-05 - 04-0 - 94 standard (ex CETOP
More informationDirectional Seat Valve Series D4S (Denison)
Characteristics Seat valves series D4S are designed for directional control functions. A large variety of poppets, springs and covers - including shuttle valves, stroke limiters, solenoid valves (VV01)
More informationBulletin HY M6/US Service Bulletin. Series D1VW, H Style 91 Design. Effective: May 1, Directional Control Valves
Service Bulletin 91 Design Effective: May 1, 2007 FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This
More informationChapter 5: Flow Valves
Contents Chapter 5: Flow Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/4 3/8 1/2 3/4 1 0 10 1 Subplate Screw-in Throttle valves, manual adjustment MVI 5-3 NS 5-5 FS With free
More information3/2-way Small Solenoid Valve, G 1/8 - G 1/4 and sub-base
3/2-way Small Solenoid Valve, G 1/8 - G 1/4 and sub-base Sub-base Direct-acting, normally closed and normally open Brass and stainless steel body Electrical cable plug Form A With or without manual override
More informationOperation. D3W Solenoid Operated Conduit Box Style. D3W Solenoid Operated Hirschmann (DIN) Style
Catalog HY14-252/US Introduction pplication arker D3 Series hydraulic directional control valves are high performance, direct operated 4-way valves, available in 2 or 3 position. hey are manifold mounted
More informationBulletin HY M2/US Service Bulletin. Series D1VW, C Style 91 Design. Effective: May 1, Directional Control Valves
Service Bulletin 91 Design Effective: May 1, 2007 FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This
More informationElectrically operated valves Series KM-09, 5/2- and 5/3-way G1/8 680 to 950 Nl/min (0.691 to Cv)
Electrically operated valves Series KM-09, 5/2- and 5/3-way G1/8 680 to 950 Nl/min (0.691 to 0.966 Cv) Order code Series and function KM-09-510-HN-442 Standard coils HN at ports 2 + 4 HN at ports 1, 3
More informationThe manifolds can be powered through various fieldbus systems, multipole or common terminals.
Servo-Assisted, Modular, 8mm Wide / and 4/ Multi-Way Valves; Servo Assisted; Flow Rate: 0.6 ft /min.; /8 NPT and /4 O.D. Legris Connections Advantages / Benefits Optimum system solutions due to high level
More information3/2-way and 2 x 3/2-way Rocker Solenoid Valve for pneumatics
65 /-way and x /-way Rocker Solenoid Valve for pneumatics Type 65 can be combined with... Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Fast response times Space
More informationPorts. Dr. Breit GmbH Carl-Zeiss-Straße 25 D Heiligenhaus phone-contact:
Solenoid operated EEx d IIC T6 Description of the Valve Directional control valves direct the flow in various directions (P A with 2/2 valves and P A // A T) with 3/2 valves. Available as 2/2 and 3/2 valves,
More informationSD2E-A3. Functional Description. 3/2 Way Solenoid Operated Directional Control Valves Spool Type HA /2013. Replaces HA /2012
3/2 Way Solenoid Operated Directional Control Valves Spool Type SD2E-A3 3/4-6 UNF p max 350 bar (5076 PSI) Q max 30 L/min (7.9 GPM) HA 404 /203 Replaces HA 404 07/202 Hardened and precision working parts
More informationSeries RE-10. Valve terminals > Technical details. Order code RE-10/**-***-*** Temperature range Medium +5 C C
Technical details Temperature range Medium + C... +0 C Filtered, oil-free and dried compressed air according to ISO 8-:00, Class ::, instrument air, free of aggressive additives. Alternatively the pressure
More informationType of operation Depending on requirement either one or two dry DC-solenoid,
Features Leakage free High availability 100% duty cycle Porting NG 6 according to DIN 24340 Positive overlap Function and design The seated valves are direct operated. Depending on the desired control
More information3/2 Directional Control Valves Direct solenoid operated poppet valves Internal thread G1/4, 1/4-18 NPT or flanged with NAMUR interface
3/ Directional Control Valves Direct solenoid operated poppet valves Internal thread G1/4, 1/4-18 NPT or flanged with NAMUR interface Suitable for instrumental air, neutral gaseous and liquid fluids and
More informationFor double-acting actuators. Crossover-free switching. Safety function in the event of power failure provided by mechanical return spring
For double-acting actuators 5/ Directional Control Valves Actuation: Electromagnetic Indirect solenoid operation soft seal spool valve Connections G 1/, 1/ NPT, G 1/, NAMUR Interface Crossover-free switching
More information3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
/-, 5/- 5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx
More informationChapter 8: Slip-In Cartridge Valves
Contents Chapter : Slip-In Cartridge Series Description Size Page DIN / ISO 16 25 32 40 50 63 0 100125 2 way slip-in cartridge valves Introduction, hydraulic symbols, installation dimensions -2 CE / CP
More information4/3-4/2 Directional valve with solenoid actuation
4/3-4/2 Directional valve with solenoid actuation RE 18305-08/12.13 1/10 L5110 LC1-Z ) Size NG6 ISO 4401-03 CETOP RP121 H-03 CETOP 3) Series 00 Maximum operating pressure 350 bar [5076 psi] Maximum flow
More informationExplosion-Proof Valves. According to Directive 94/9/EC (ATEX) and IECEx Requirements
Explosion-Proof Valves ccording to Directive 94/9/EC (EX) and IECEx Requirements WRNING USER RESPONSIILIY FILURE OR IMPROPER SELECION OR IMPROPER USE OF HE PRODUCS DESCRIED HEREIN OR RELED IEMS CN CUSE
More informationRemote Process Actuation Control System AirLINE - Siemens ET 200S
Remote Process Actuation Control System AirLINE - Siemens ET 200S Type 8644 can be combined with... Fully compatible with Siemens ET 200S Combination of Fieldbus, pilot valves and I/O modules High flexibility
More informationRubber Seal 5 Port Pilot Type/Body Ported Type. Symbol. How to Order
Rubber Seal 5 Port Pilot Type/Body Ported Type DS5420- GC- COMPACT SIZE AND LIGHT WEIGHT LARGE FLOW CAPACITY LOW POWER CONSUMPTION DESIGNED FOR NON-LUBRICATED SERVICE DS5320- G- DS5220- G- Symbol Single
More informationM/48, M/148. 3/2 Poppet Valves Electrically Actuated. Miniature, 22 mm normally closed and normally open models. Sub-base mounted and manifold mounted
M8, M Miniature, 22 mm normally closed and normally open models Sub-base mounted and manifold mounted 32 Poppet Valves Electrically Actuated M5 Manual override as standard Encapsulated coils with very
More informationPilot-Operated Pressure Relief Valve Series RM
Characteristics Pilot-Operated Relief alve The pilot-operated pressure relief valves from the Parker Manapak series RM are sandwich plate valves designed for stacking beneath a directional valve with a
More informationGM/GMN Series Industrial standard/din B/ISO 6952
Industrial standard/din 43650-B/ISO 695 GM/GMN Series Cable socket, self-assembly Product features durable angled connectors, dust and splash protected (IEC 6059 IP 65) vibration-proof locking using a
More information2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2
2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2 Type 6281 can be combined with... User friendly - one solenoid for all orifices Waterhammer free and low noise NC or NO Manual override optional
More informationFlow Control Valve. 1 Description. 2 Symbols. Series SRCA General. 1.2 Application examples way flow control way flow control
Flow Control Valve Series SRC.. plug-in coil for easy coil change flow rates are unaffected by changes in temperature or load compact design reduced p ZnNi coating (>70h DIN EN ISO 97 NSS) Description.
More information