COILS DELTA POWER COMPANY

Size: px
Start display at page:

Download "COILS DELTA POWER COMPANY"

Transcription

1 COILS COMPANY Section / Description page COIL DATA... CD3 IMMERSION PROOF... CD16 GENERAL CARTRIDGE VALVE INSTALLATION NOTES... CD19 CAD INSERTION CODES - 2D... CD20 CAD INSERTION CODES - 3D... CD22 Page CD1

2 Page CD2

3 COIL DATA STANDARD COILS TYPE ID WIDTH HEIGHT PAGE PJ 1/ CD4 P 1/ CD6 D 1/ CD8 L 5/ CD10 T 3/ CD12 F 3/ CD14 IMMERSION PROOF I COILS TYPE ID WIDTH HEIGHT PAGE PI 1/ CD16 DI 1/ CD17 LI 5/ CD18 Page CD3

4 P TYPE J COIL DESCRIPTION 1/2 inch (13 mm) I.D. Coil. FEATURES One piece encapsulated design that is: Weatherproof (when applied with o-rings) No external metal shell COIL SPECIFICATION Wattage 21 Watts Nominal Duty Rating Continuous Duty ±10% rated voltage at 120 F (49 C) ambient Min Current for Actuation 80% of rated current at room temperature Magnet Wire Class H or Better for all voltages Temperature Range -40 to 392 F (-40 to 200 C) Encapsulation Material Thermo-Plastic, resistant to moisture, caustic solutions, fungus, and vibrations ORDERING INFORMATION P Approximate Coil Weight:.43 lbs (.19 kg) TERMINATIONS VOLTAGE AMP Superseal - Integral Double lead AMP Jr. Timer - Integral Metri-Pack - Integral Deutsch - Integral DT04-2P DIN (Hirschmann) JA JL JJ JM JD JH VDC / VDC /.875 Page CD4

5 Page CD5

6 STANDARD P TYPE COILS DESCRIPTION Standard coil data P-Type coil 1/2 I.D. FEATURES One piece water resistant encapsulated design. Numerous terminals and voltages. Coil interchangeability with Delta Series and Super Series valves. Heavy gauge color coded lead wire. Reversible coil (can be installed on cartridges in both directions with equal efficiency). Note: 1. For coil selection in extreme conditions, please look at our I coil line of invironmental coils. 2. For PB-S2I, HB-S2C & HB-S2D use nut ORDERING INFORMATION WHEN ORDERING FILL IN ALL BOXES P Approximate Coil Weight:.72 lbs (.32 kg) BASIC MODEL NO. TERMINATION VOLTAGE P-Type One Piece Encapsulated Coil (ALL COILS DC VOLTAGE EXCEPT AS NOTED) DL Double Lead DT Deutsch on Leads DT04-2P DI Deutsch - Integral DT04-2P ML Metri-Pack on Leads ( ) MI Metri-Pack - Integral ( ) PL Packard on Leads (150 Series) WL Weatherpack on Leads ( ) SS Single Spade DS Double Spade HC DIN (Hirschman) - (AC/DC) CL Conduit Lead - (AC ON LY) 06 6VDC 12 12VDC 24 24VDC 36 36VDC 48 48VDC 25 24VAC VAC VAC VAC VAC VAC 19 WATT STD. COIL Page CD6

7 STANDARD P TYPE COILS COIL MODEL NUMBERS: Termination PDL PSL PDS PSS PHC PCL Description Double Lead AC Double Single Double Single Hirschmann Lead Wire Lead Lead Spade Spade Connector Conduit Color Range 6VDC VDC 12VDC 12VDC 12VDC 12VDC VDC 24VDC 24VDC 24VDC VDC 36VDC VDC 48VDC ORANGE YELLOW BLUE GREEN BROWN 24VAC 24VAC 24VAC BLUE/ BLACK 110VA 10VAC 110VAC RED/ 100VAC WHITE 115VAC 125VAC 125VAC 115VAC RED VAC 220VAC 220VAC BLACK/ 200VAC WHITE 230VAC 250VAC 250VAC VIOLET/ 225VAC WHITE 260VAC 440VAC 440VAC 400VAC VIOLET VAC SPECIFICATIONS WATTAGE: 19 watts nominal. DUTY RATING: continuous duty ±10% rated voltage at 120 F (49 C) ambient. MINIMUM CURRENT FOR ACTUATION: 80% of rated current at room temperature. MAGNET WIRE CLASS: N for all voltages. TEMPERATURE RANGE: -40 F (-40 C) to 392 F (200 C) LEAD WIRES: 18 gauge, 24 long, 600 Volt rating, with strain relief. ENCAPSULATING MATERIAL: glass filled polyester, resistant to moisture, caustic solutions, fungus and vibration. Temperature range is -40 F (-40 C) to 392 F (200 C). COLOR IDENTIFICATION: black NOTE: Delta Power A.C. Coils incorporate integrally molded full wave rectifiers which are rated for reverse voltage peaks of 1000 volts maximum. A.C. Coils are rated 50/60 HZ. Optimum operating voltage noted. Conduit connectors on A.C. coils have a maximum torque spec of 3 Ft. Lbs. Arc Suppression Diode Available Page CD7

8 STANDARD D TYPE COILS DESCRIPTION Standard coil data D-Type coil 1/2 I.D. MODEL NO. FEATURES One piece water resistant encapsulated design [26.8] VOLTAGE Numerous terminals and voltages. Heavy gauge color coded lead wire. 1/2" ID [12.7] Each coil is reversible (can be installed on cartridges in both directions with equal efficiency) [46.6] 1.56 [39.6] Note: For coil selection in extreme conditions, please look at our I coil line of invironmental coils [51.6] DDL DDS DSS DHC DCL [12.4] [20.6] [20.6].73 [18.5] 1.11 [28.2] ORDERING INFORMATION DMI WHEN ORDERING FILL IN ALL BOXES D Approximate Coil Weight:.72 lbs (.32 kg) 1.71 [43.4] BASIC MODEL NO. TERMINATION VOLTAGE D-Type One Piece Encapsulated Coil (ALL COILS DC VOLTAGE EXCEPT AS NOTED) DL Double Lead DT Deutsch on Leads DT04-2P DI Deutsch - Integral DT04-2P ML Metri-Pack on Leads ( ) MI Metri-Pack - Integral ( ) PL Packard on Leads (150 Series) WL Weatherpack on Leads ( ) SS Single Spade DS Double Spade HC DIN (Hirschman) - (AC/DC) CL Conduit Lead - (AC ON LY) 22 WATT STD. COIL 06 6VDC 12 12VDC 24 24VDC 36 36VDC 48 48VDC 25 24VAC VAC VAC VAC VAC VAC DDI.85 [21.6].76 [19.3] 1.75 [44.5] Page CD8

9 STANDARD D TYPE COILS COIL MODEL NUMBERS: Termination DDL DSL DDS DSS DHC DCL AC Description Double Single Double Single Double Lead Hirschmann Lead Lead Spade Spade Lead Wire Connector Conduit Color Range 6VDC 6VDC 6VDC 6VDC 6VDC ORANGE VDC 12VDC 12VDC 12VDC 12VDC YELLOW VDC 24VDC 24VDC 24VDC 24VDC BLUE VDC 36VDC 36VDC 36VDC 36VDC GREEN VDC 48VDC 48VDC 48VDC 48VDC BROWN VAC 24VAC 24VAC BLUE/ BLACK 110VAC 110VAC RED/ 100VAC WHITE 115VAC 125VAC 125VAC 115VAC RED VAC 220VAC 220VAC BLACK/ 200VAC WHITE 230VAC 250VAC 250VAC VIOLET/ 225VAC WHITE 260VAC 440VAC 440VAC 400VAC VIOLET VAC SPECIFICATIONS WATTAGE: 22 watts nominal. DUTY RATING: continuous duty ±10% rated voltage at 120 F (49 C) ambient. MINIMUM CURRENT FOR ACTUATION: 80% of rated current at room temperature. MAGNET WIRE CLASS: N for all voltages. TEMPERATURE RANGE: -40 F (-40 C) to 392 F (200 C) LEAD WIRES: 18 gauge, 24 long, 600 Volt rating, with strain relief. ENCAPSULATING MATERIAL: glass filled polyester, resistant to moisture, caustic solutions, fungus and vibration. Material temperature range is -40 F (-40 C) to 392 F (200 C). COLOR IDENTIFICATION: black NOTE: Delta Power A.C. Coils incorporate integrally molded full wave rectifiers which are rated for reverse voltage peaks of 1000 volts maximum. A.C. Coils are rated 50/60 HZ. Optimum operating voltage noted. Conduit connectors on A.C. coils have a maximum torque spec of 3 Ft. Lbs. Arc Suppression Diode Available Page CD9

10 STANDARD L TYPE COILS DESCRIPTION Standard coil data L-Type coil 5/8 I.D. FEATURES One piece water resistant encapsulated design [26.8] MODEL NO. VOLTAGE Numerous terminals and voltages. Heavy gauge color coded lead wire. Each coil is reversible (can be installed on cartridges in both directions with equal efficiency) [46.6] 5/8" I.D. [15.9] 1.56 [39.6] Note: For coil selection in extreme conditions, please look at our I coil line of invironmental coils [51.6] LDL LDS LSS LHC LCL [12.4] [20.6] [20.6].73 [18.5] 1.11 [28.2] ORDERING INFORMATION LMI WHEN ORDERING FILL IN ALL BOXES L BASIC MODEL NO. TERMINATION VOLTAGE Approximate Coil Weight:.72 lbs (.32 kg) 1.71 [43.4] D-Type One Piece Encapsulated Coil (ALL COILS DC VOLTAGE EXCEPT AS NOTED) DL Double Lead DT Deutsch on Leads DT04-2P DI Deutsch - Integral DT04-2P ML Metri-Pack on Leads ( ) MI Metri-Pack - Integral ( ) PL Packard on Leads (150 Series) WL Weatherpack on Leads ( ) SS Single Spade DS Double Spade HC DIN (Hirschman) - (AC/DC) CL Conduit Lead - (AC ON LY) 22 WATT STD. COIL 06 6VDC 12 12VDC 24 24VDC 36 36VDC 48 48VDC 25 24VAC VAC VAC VAC VAC VAC LDI.85 [21.6].76 [19.3] 1.75 [44.5] Page CD10

11 STANDARD L TYPE COILS COIL MODEL NUMBERS: Termination LDL LDS LHC LCL Description Double Lead 12VDC 24VDC Double Spade 12VDC VDC.9 Hirschmann Connector 12VDC VDC.9 110VAC VAC.08 Double Lead Conduit 110VAC VAC.08 Lead Wire Color YELLOW BLUE GREEN BROWN BLUE/ BLACK RED/ WHITE RED BLACK/ WHITE VIOLET/ WHITE VIOLET 115VAC 130VAC 225VAC 260VAC AC Range 100VAC 115VAC 200VAC 230VAC 400VAC 460VAC Data in this chart reflects current usage. Additional terminations, connections and suppression devices are available. Consult the factory for special applications. SPECIFICATIONS WATTAGE: 22 watts nominal. DUTY RATING: continuous duty ±10% rated voltage at 120 F (49 C) ambient. MINIMUM CURRENT FOR ACTUATION: 80% of rated current at room temperature. MAGNET WIRE CLASS: N for all voltages. TEMPERATURE RANGE: -40 F (-40 C) to 392 F (200 C) LEAD WIRES: 18 gauge, 24 long, 600 Volt rating, with strain relief. ENCAPSULATING MATERIAL: glass filled polyester, resistant to moisture, caustic solutions, fungus and vibration. Material temperature range is -40 F (-40 C) to 392 F (200 C). COLOR IDENTIFICATION: black NOTE: Delta Power A.C. Coils incorporate integrally molded full wave rectifiers which are rated for reverse voltage peaks of 1000 volts maximum. A.C. Coils are rated 50/60 HZ. Optimum operating voltage noted. Conduit connectors on A.C. coils have a maximum torque spec of 3 Ft. Lbs. Page CD11

12 STANDARD T TYPE COILS DESCRIPTION T-Type coil 3/4 I.D. FEATURES One piece water resistant encapsulated design [34.5] _ MODEL NO. Numerous terminals and voltages. VOLTAGE Each coil is not reversible [49.7] 3/4" ID [19.1] 1.80 [45.7] 2.38 [60.6] TDL.24 [6.0] TDS.45 [11.3] THC.49 [12.5] ORDERING INFORMATION WHEN ORDERING FILL IN ALL BOXES T Approximate Coil Weight:.90 lbs (.41 kg) BASIC MODEL NO. TERMINATION VOLTAGE T-Type One Piece Encapsulated Coil (ALL COILS DC VOLTAGE EXCEPT AS NOTED) DL Double Lead DT Deutsch on Leads DT04-2P ML Metri-Pack on Leads ( ) PL Packard on Leads (150 Series) WL Weatherpack on Leads ( ) DS Double Spade HC DIN (Hirschman) - (AC/DC) 28 WATT STD. COIL 06 6VDC 12 12VDC 24 24VDC 36 36VDC 48 48VDC 25 24VAC VAC VAC Page CD12

13 STANDARD T TYPE COILS COIL MODEL NUMBERS: Termination TDL TDS THC Description Double Lead 12VDC 24VDC 36VDC 48VDC Double Spade 12VDC 24VDC 36VDC 48VDC Hirschmann Connector 12VDC 24VDC 36VDC 48VDC Lead Wire Color BLACK RED BLUE GREEN AC Range Data in this chart reflects current usage. Additional terminations, connections and suppression devices are available. Consult the factory for special applications. 25VAC 1.75 RED/ BLUE 25VAC 120VAC.31 RED/ BLUE 115VAC 130VAC 240VAC.15 RED/ BLUE 225VAC 260VAC SPECIFICATIONS WATTAGE: 28 watts nominal. DUTY RATING: continuous duty ±10% rated voltage at 120 F (49 C) ambient. MINIMUM CURRENT FOR ACTUATION: 80% of rated current at room temperature. MAGNET WIRE CLASS: N for all voltages. TEMPERATURE RANGE: -40 F (-40 C) to 392 F (200 C) LEAD WIRES: 18 gauge, 24 long, 600 Volt rating, with strain relief. ENCAPSULATING MATERIAL: glass filled polyester, resistant to moisture, caustic solutions, fungus and vibration. Material temperature range is -40 F (-40 C) to 392 F (200 C). COLOR IDENTIFICATION: black NOTE: Delta Power A.C. Coils incorporate integrally molded full wave rectifiers which are rated for reverse voltage peaks of 1000 volts maximum. A.C. Coils are rated 50/60 HZ. Optimum operating voltage noted. Page CD13

14 STANDARD F TYPE COILS DESCRIPTION T-Type coil 3/4 I.D. FEATURES One piece water resistant encapsulated design. Numerous terminals and voltages available. Internal arc suppression diodes available on request. Color identification: metallic envelope. FHC FJT FDT ORDERING INFORMATION WHEN ORDERING FILL IN ALL BOXES F Approximate Coil Weight:.49 lbs (.22 kg) MODEL TERMINATION VOLTAGE F (proportional coil type) (ALL COILS DC VOLTAGE EXCEPT AS NOTED) HC DIN (Hirschman) DI Deutsch Integral DT04-2P JT Junior Timer 12 12VDC 24 24VDC VAC without internal rectifier (for HC termination only) Page CD14

15 STANDARD F TYPE COILS COIL MODEL NUMBERS: Termination FHC FDI FJT Description Hirschmann connector Deutsch Integral Junior Timer / 12 V / 1,66 A 12 V / 1,66 A 12 V / 1,66 A / 24 V / 0,83 A 24 V / 0,83 A 24 V / 0,83 A / 220 VAC rectified / 0,10 A SPECIFICATIONS WATTAGE: 20 watts nominal. DUTY RATING: continuous duty ±10% rated voltage at 120 F (49 C) ambient. MINIMUM CURRENT FOR ACTUATION: 80% of rated current at room temperature. MAGNET WIRE INSULATION: class H (200 C). HEAT INSULATION: class H (180 C). AMBIENT TEMPERATURE RANGE: -30 C +60 C PROTECTION DEGREE: IP 65 (with connector and suitable seals). LEAD WIRES: 600 Volt rating, with strain relief. ENCAPSULATING MATERIAL: glass filled polyester, resistant to moisture, caustic solutions, fungus and vibration. Metallic parts protected against oxidation. A.C. coils do not include the rectifier, supply voltage must be externally rectified Page CD15

16 IMMERSION PROOF P TYPE I COILS DESCRIPTION 1/2 inch (13 mm) I.D. Short Immersion Proof Coil [37.5] PART.98 [25.0] FEATURES One piece encapsulated design that is: Weatherproof Immersion proof Thermal shock / dunk tested No external metal shel 1.70 [43.1] XXXXX COIL SPECIFICATION Wattage Duty Rating 20 Watts Nominal Continuous Duty ±10% rated voltage at 120 F (49 C) ambient VOLTAGE 1.54 [39.0] Min Current for Actuation Magnet Wire Class 80% of rated current at room temperature H or Better for all voltages Temperature Range -40 to 392 F (-40 to 200 C) Protection degree Up to IP 65 (with connector and suitable seals) Encapsulation Material Thermo-Plastic, resistant to moisture, caustic solutions, fungus, and vibrations.64 [16.4].57 [14.5].82 [20.8].27 [6.8].57 [14.4] 1.93 [49.1].81 [20.6].82 [20.8] 2.05 [52.0].75 [19.0] 1.60 [40.6].48 [12.1] IA IJ ID IM ORDERING INFORMATION P Approximate Coil Weight:.43 lbs (.19 kg) TERMINATIONS VOLTAGE AMP Superseal - Integral Deutsch - Integral DT04-2P AMP Junior Timer - Integral Metri-Pack - Integral IA ID IJ IM Yellow Lettering.80 Blue Lettering NOTE: Pull type valves require nut in lieu of standard nut. Push type valves require nut in lieu of standard nut, except for PB-S2I, HB-S2C & HB- S2D use nut Page CD16

17 IMMERSION PROOF D TYPE I COILS 1.48 [37.5] PART.98 [25.0] DESCRIPTION 1/2 inch (13 mm) I.D. Immersion Proof Coil. FEATURES One piece encapsulated design that is: Weatherproof Immersion proof Thermal shock / dunk tested No external metal shel 1.97 [50.0] XXXXX COIL SPECIFICATION Wattage Duty Rating 24 Watts Nominal Continuous Duty ±10% rated voltage at 70 F (21 C) ambient VOLTAGE 1.54 [39.0] Min Current for Actuation Magnet Wire Class 90% of rated current at room temperature H or Better for all voltages Temperature Range -40 to 392 F (-40 to 200 C) Encapsulation Material Thermo-Plastic, resistant to moisture, caustic solutions, fungus, and vibrations.64 [16.4].57 [14.5].82 [20.8].27 [6.8].57 [14.4] 2.20 [56.0] 1.08 [27.5] 1.09 [27.7] 2.32 [59.0] 1.02 [26.0] 1.87 [47.5].75 [19.0] IA IJ ID IM ORDERING INFORMATION D Approximate Coil Weight:.49 lbs (.22 kg) TERMINATIONS VOLTAGE AMP Superseal - Integral Deutsch - Integral DT04-2P AMP Junior Timer - Integral Metri-Pack - Integral IA ID IJ IM VDC / 2.0 Yellow Lettering 24 VDC / 1.0 Blue Lettering NOTE: Pull type valves require nut in lieu of standard nut. Push type valves require nut in lieu of standard nut. Page CD17

18 IMMERSION PROOF L TYPE I COILS DESCRIPTION 5/8 inch (16 mm) I.D. Immersion Proof Coil [37.5] 1.97 [50.0] VOLTAGE PART # 1.48 [37.5] 1.97 [50.0] VOLTAGE XXXXX PART # 1.54 [39.0].98 [25.0] XXXXX 1.54 [39.0].98 [25.0] FEATURES One piece encapsulated design that is: Weatherproof Immersion proof Thermal shock / dunk tested No external metal shel COIL SPECIFICATION Wattage Duty Rating Min Current for Actuation Magnet Wire Class Temperature Range Encapsulation Material 26 Watts Nominal Continuous Duty ±10% rated voltage at 120 F (49 C) ambient 80% of rated current at room temperature H or Better for all voltages -40 to 392 F (-40 to 200 C) Thermo-Plastic, resistant to moisture, caustic solutions, fungus, and vibrations.64 [16.4].57 [14.5].82 [20.8].27 [6.8].57 [14.4] 2.20 [56.0] 1.08 [27.5] 1.09 [27.7] 2.32 [59.0] 1.02 [26.0] 1.87 [47.5].75 [19.0] IA IJ ID IM ORDERING INFORMATION L Approximate Coil Weight:.49 lbs (.22 kg) TERMINATIONS VOLTAGE AMP Superseal - Integral Deutsch - Integral DT04-2P AMP Junior Timer - Integral Metri-Pack - Integral IA ID IJ IM VDC / 2.2 Yellow Lettering 24 VDC / 1.1 Blue Lettering NOTE: Pull type valves require nut in lieu of standard nut. Push type valves require nut in lieu of standard nut. Page CD18

19 GENERAL CARTRIDGE VALVE INSTALLATION NOTES CARTRIDGES Inspect the cartridge to assure there is no external contaminant present. Check O-rings and back-up rings to assure they are intact and in the correct position. The O-rings should always be toward the high pressure port or between doubled back-up rings on bi-directional applications. COILS It is sometimes easier to remove the coil from the cartridge valve to install terminations or make connections with conduit, etc. If this is the case, reinstall the coil by tightening the coil nut to 4-6 ft lbs per spec sheet. CAUTION: DO NOT OVER TORQUE Tube will be stretched and damaged, causing valve to fail. VALVE BODIES Check the cartridge brochure to assure correct plumbing. Inspect the cavity for burrs and any irregular machining which would damage 0-rings at assembly. Shims may be required behind the block for panel mounting. ASSEMBLY Dip the cartridge in clean oil before installing. Screw the cartridge in by hand until the top 0-ring is touching the manifold, then wrench tighten to the proper torque specification given below. TORQUE SPECIFICATIONS Final Cartridge Tightening: Adjusting Holding Parts: Series Torque Part Torque 5/8 MINI ft-lbs 3/4 POWER ft-lbs Nut 3-5 ft-lbs Knob 3-5 ft-lbs 7/8 DELTA ft-lbs 1 1/16 TECNORD ft-lbs 1 5/16 SUPER ft-lbs Cap 2-3 ft-lbs Page CD19

20 DDL12 12 VDC COILS CAD INSERTION CODES - 2D MECHANICAL VALVES The insertion codes for mechanical valves are based on the first seven digits of the valve mnemonic code number. The eighth digit represents the direction of the view. Mnemonic Always use 0 (zero) INSERTION CODES M A R V A 0 K E D E F C A 0 0 S View codes: E = End (top) view F = Front or back view S = Side view DERVA0KE (END) Mnemonic option codes: 0 = no visible options K = Knob I = Internal adjustment T = Tamper proof DERVA0KF (FRONT) DERVA0KS (SIDE) SOLENOID VALVES COIL VIEWS View code: E = End (top) F = Front B = Back R = Right L = Left Series code: M = Mini P = Power A = Power 4W3P Delta Coil B = Power 4W3P Power Coil D = Delta L = Delta 4W3P T = Tecnord "D" Type Coil H = Tecnord "T" Type Coil High Pressure S = Super The connector code is not used for back views CODE F D D L Connector code: DL = Double Lead SL = Single Lead DS = Double Spade SS = Single Spade DP = Double Post SP = Single Post HC = Hirschmann CL = Conduit Lead DC = Deutsch Integral Connector IA = Integral Superseal ID = Integral Deutsch IMMERSION IM = Integral Jr. COILS IM = Integral Metri-Pack BACK LEFT FRONT RIGHT For Proportional Valve views: EEPRD00 DL L Model Number View code: Connector code: END MANUAL OVERRIDES View code: C = Normally Closed O = Normally Open P = 4W3P Push-only B = Bi-directional CODE F D Series code: P = Power PI = Power w/ "I" Coil D = Delta DI = Delta w/ "I" Coil T = Tecnord S = Super CD EXAMPLE PP NORMALLY OPEN VALVE COIL NUTS FMNUT MINI SERIES NUT SMNUT FNUT SNUT POWER, DELTA, TECNORD AND SUPER SERIES NUT FINUT SINUT POWER, DELTA, AND TECNORD IMMERSION COIL NUTS HYDRAULIC SYMBOLS C V A Third, fourth, and fifth digits of mnemonic CVA S2A Page CD20

21 CAD INSERTION CODES - 2D CAVITIES PORTS S N E E View code: E = End (top) S = Side H = Hidden (side) E Last four digits of form tool P/N. Port code: S = SAE N = NPT View code: E = End (top) S = Side H = Hidden (side) Size code NPT Examples: 1/16-27 = /4-14 = /4-11 1/2 = 11-4 NE3-4 NS3-4 SAE SIZES AVAILABLE NPT SIZES AVAILABLE E0000 S0000 #2 SAE #3 SAE #4 SAE #5 SAE #6 SAE #8 SAE #10 SAE #12 SAE #14 SAE #16 SAE #20 SAE #24 SAE #32 SAE 1/16" NPT 1/8" NPT 1/4" NPT 3/8" NPT 1/2" NPT 1" NPT 1 1/4" NPT 1 1/2" NPT 2" NPT SAE PLUGS PLUGS NPT PLUGS CAVITY PLUGS 1 2 S S 3-4 E N P E Size code: View code: S = Side E = End (top) Size code: Series code: M = Mini P = Power D = Delta T = Tecnord S = Super View code: F = Front S = Side E = End (top) 12ES 12SS 3-4EN SIZES AVAILABLE SIZES AVAILABLE END SIDE #2 SAE #3 SAE #4 SAE #5 SAE #6 SAE #8 SAE #10 SAE #12 SAE #14 SAE #16 SAE #20 SAE #24 SAE #32 SAE 1/16" NPT 1/8" NPT 1/4" NPT 3/8" NPT 1/2" NPT 1" NPT 1 1/4" NPT 1 1/2" NPT 2" NPT FRONT BODIES D 2 M 3 W S W N Series code: M = Mini P = Power D = Delta T = Tecnord S = Super Port code: S = SAE N = NPT Style code: 2W = two way 3W = three way 4W = four way 5W = five way D2WS M3WN CONSULT FACTORY FOR FORMAT AVAILABILITY Page CD21

22 CAD INSERTION CODES - 3D CARTRIDGE VALVES INSERTION CODES MARVA0K D E S2A0M Mnemonic Always use 0 (Zero) Mnemonic option codes: Mechanical valve options: 0= No visible options K= Knob I= Internal adjustment T= Tamperproof Solenoid valve options: 0= No visible options K= Manual override, Knob type I= Manual override T= Manual override, Push only COILS INSERTION CODES D ID PDS Series code: M= Mini P= Power D= Delta, Tecnord & Super L= Delta 4W3P T= Tecnord High Pressure Coil termination: CL= Conduit lead DI= Integral Deutsch DT04-2P MI= Integral Metripack DL= Double leads DP= Double post DS= Double spade DT= Deutsch on leads DT04-2P HC= DIN (Hirschmann) ML= Metripack on leads ( ) WL= Weatherpack onleads ( ) IA= I coil, integral AMP Superseal ID= I coil, integral Deutsch DT04-2P IJ= I coil, integral AMP Jr. Timer IM= I coil, integral Metripack COIL NUTS MINI Series: Normally open: Normally closed: POWER, DELTA, TECNORD & SUPER Series: Normally open: Normally closed: Normally open w/ I coil: Normally closed w/ I coil: TECNORD High Pressure Series: Normally closed: W3P Coil nuts: Power Series: Delta Series: BODIES INSERTION CODES Series code: M= Mini P= Power D= Delta T= Tecnord S= Super D2WS M3WN Port code: S= SAE N= NPT Style code: 2W= Two way 3W= Three way 3WS= Three way short 4W= Four way 5WS= Five way short CAVITY PLUGS INSERTION CODES Series code: DE00 SL00 Will always be 00 (Zero) MINI MA= Mini 2W MC= Mini 3W MD= Mini 4W POWER PB= Power 2W PP= Power 3W PQ= Power 4W DELTA DE= Delta 2W DF= Delta 3W DG= Delta 4W TECNORD TT= Tecnord 2W TU= Tecnord 3W TR= Tecnord 3WS TV= Tecnord 4W SUPER SJ= Super 2W SK= Super 3W SL= Super 3WS SM= Super 4W SO= Super 5WS Page CD22

GPM PSI LPM BAR MODEL CAVITY PAGE IF-S3A special IF-S3D special IG-S4A special 198

GPM PSI LPM BAR MODEL CAVITY PAGE IF-S3A special IF-S3D special IG-S4A special 198 Transmission & Brake Spool Valves Screw-in style GPM PSI LPM BAR MODEL CAVITY PAGE 2 1000 8 70 TC-S3A 5/8-18 186 6 1000 23 70 TF-S3A 7/8-14 188 6 1000 23 70 TF-S3D 7/8-14 190 5 1000 20 70 TG-S4A 7/8-14

More information

Catalog HY /US SERIES DESCRIPTION PAGE NO. SUPER COILS CC... 1/2 Solenoid Tubes... CE3-CE4 CA... 5/8 Solenoid Tubes...

Catalog HY /US SERIES DESCRIPTION PAGE NO. SUPER COILS CC... 1/2 Solenoid Tubes... CE3-CE4 CA... 5/8 Solenoid Tubes... Contents Coils and SERIES DESCRIPTION PAGE NO. SUPER COILS CC... 1/2 Tubes... 3-4 CA... 5/8 Tubes... 5-6 STANDARD COILS Unicoil... 1/2 Tubes... 7-8 Unicoil... 5/8 Tubes... 9-10 DS... 1/2 Tubes... 11-12

More information

Standard Coils and Proportional Valve Coils

Standard Coils and Proportional Valve Coils COILS AND ELECTRONIC CONTROLS Standard Coils and Proportional Valve Coils WHY HYDRAFORCE STANDARD COILS OUTPERFORM COMPETITIVE UNITS High Quality Materials HydraForce coils are made with high quality,

More information

DRV2-080 Adjustable, Direct-Acting Relief Valve

DRV2-080 Adjustable, Direct-Acting Relief Valve SOLENOID DRV2-080 Adjustable, Direct-Acting Relief Valve SERIES 8 CHECK MOTION FLOW USASI / ISO ➁ ➀ DESCRIPTION An adjustable, direct-acting poppet cartridge valve designed to limit pressure in hydraulic

More information

Delta Power Company 4484 Boeing Drive - Rockford, IL 61109

Delta Power Company 4484 Boeing Drive - Rockford, IL 61109 VALVE CATALOG MAIN INDEX RELEASED DATE: JUNE 03. QUICK SELECTION GUIDE Page SOLENOID OPERATED DIRECTIONAL CONTROLS (See ENGINEERING DATA for coil specs) Page 7 MECHANICAL DIRECTIONAL CONTROLS Page 5 PRESSURE

More information

Solenoid Coils for Switching and Proportional Valves

Solenoid Coils for Switching and Proportional Valves Solenoid Coils for Switching and Proportional Valves Overview Solenoids and coils are used to convert electrical energy to the mechanical force used to shift valve components to control flow or pressure.

More information

ACCESSORIES ACCESSORIES VALVE BODIES... AC2 CAVITY PLUGS... AC4 MANUAL OVERRIDE OPTIONS... AC9 PILOT PISTON ASSEMBLIES... AC11

ACCESSORIES ACCESSORIES VALVE BODIES... AC2 CAVITY PLUGS... AC4 MANUAL OVERRIDE OPTIONS... AC9 PILOT PISTON ASSEMBLIES... AC11 SSORIS Section / Description page VLV BODIS... 2 VITY PLUGS... 4 MNUL OVRRID OPTIONS... 9 PILOT PISTON SSMBLIS... 11 STNDRD KNOB SSMBLIS... 12 Page 1 STNDRD BODIS - DLT BODY PORT SIZ P/N STYL / SIZ DIMNSIONS

More information

SV SOLENOID OPERATED

SV SOLENOID OPERATED Directional Control Valves SV Work Sections Type -T Solenoid Operated Type -S Solenoid and Manual Operation STANDARD FEATURES Open center or closed center applications Port relief options available Internal

More information

PRESSURE TRANSDUCERS. Specifications. Individual Specifications

PRESSURE TRANSDUCERS. Specifications. Individual Specifications 00 Series and 00 Heavy Duty Series Compact OEM Pressure Transmitters 0 50 psi to 0-0,000 psi ranges (0-.5 bar to 0-,00 bar) High Proof Pressures Broad Choice of Outputs RoHS Compliant For OEMs that need

More information

Proportional Valves. Proportional solenoid valves for pressure and flow control

Proportional Valves. Proportional solenoid valves for pressure and flow control Proportional Valves Proportional solenoid valves for pressure and flow control EATON Vickers Screw-In Cartridge Valves V-VLOV-MC-E4 September, 7 - Electro- Proportional Valves Section Contents Typical

More information

Hydraulic Screw-in Cartridge Valves (SiCV) Proportional valves Proportional solenoid valves for pressure and flow control

Hydraulic Screw-in Cartridge Valves (SiCV) Proportional valves Proportional solenoid valves for pressure and flow control Hydraulic Screw-in Cartridge Valves (SiCV) Proportional valves Proportional solenoid valves for pressure and flow control Proportional valves PROPORTIONAL VALVES... - PFRH... -8 EPV...- EPV6...- EPV6A...-7

More information

PRESSURE TRANSDUCERS. Specifications. Individual Specifications

PRESSURE TRANSDUCERS. Specifications. Individual Specifications GEMS COMPLIANT 00 Series and 00 Heavy Duty Series Compact OEM Pressure Transmitters 0 00 psi to 0-0,000 psi ranges (0- bar to 0-,00 bar) High Proof Pressures Broad Choice of Outputs RoHS Compliant For

More information

Information 3 Form A 4 Industrial Form Type B 12 Form B 16 Form C 18 Micro Type C 22

Information 3 Form A 4 Industrial Form Type B 12 Form B 16 Form C 18 Micro Type C 22 TABLE OF CONTENTS Connectors Information 3 Form A 4 Industrial Form Type B 12 Form B 16 Form C 18 Micro Type C 22 Function Fittings Information 26 Flow Controls 27 Pilot Operated Check Valves 28 Pressure

More information

Proportional Valves. Proportional solenoid valves for pressure and flow control B-1.A. An Eaton Brand

Proportional Valves. Proportional solenoid valves for pressure and flow control B-1.A. An Eaton Brand Proportional Valves Proportional solenoid valves for pressure and flow control An Eaton rand -.A Proportional Valves Valve Locator/Section Contents Note: Proportional valve solenoid coils and electronic

More information

SECTIONAL BODY. Model SV. Directional Control Valves VALVES STANDARD FEATURES SPECIFICATIONS. Parallel or Series Circuit Construction ...

SECTIONAL BODY. Model SV. Directional Control Valves VALVES STANDARD FEATURES SPECIFICATIONS. Parallel or Series Circuit Construction ... Directional Control Valves SECTIONAL BODY Model SV STANDARD FEATURES SPECIFICATIONS Parallel or Series Circuit Construction Foot Mounting Pressure Rating Maximum Operating Temp....... Weight Per Section......

More information

PACKED SPOOL 4-WAY DIRECTIONAL CONTROL VALVE.

PACKED SPOOL 4-WAY DIRECTIONAL CONTROL VALVE. PACKED SPOOL 4-WAY DIRECTIONAL CONTROL VALVE www.elwood.com 0 0 1 : 0 0 0 C E R T I F I E D C O M P A N Y 4-Way 3-Postion Valve 4-WAY, 3-POSITION DIRECTIONAL VALVE, AIR SOLENOID OPERATED SHOWN; DIRECT

More information

3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow

3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow 3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow A-VRFC3C-VEI-VS 0M.43.20.80 - Y - Z RE 18309-3 Edition: 03.2016 Replaces: 06.2010 Technical data Description

More information

Chapter 2: Directional Control Valves

Chapter 2: Directional Control Valves Contents Chapter : Directional Control Valves Series Description Direct operated Pilot operated Page DIN / ISO 06 10 16 5 3 10 16 5 3 Seat valves, electrically operated D1SE - Spool valves, electrically

More information

Solenoid Valves. Poppet and Spool type solenoid actuated valves for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm) A-1.

Solenoid Valves. Poppet and Spool type solenoid actuated valves for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm) A-1. Solenoid Valves Poppet and Spool type solenoid actuated valves for applications up to 5 bar (5 psi) and 7 L/min (6 USgpm) n Eaton Brand ETON Screw-In Cartridge Valves E-VLSC-MC-E November 9 -. Solenoid

More information

HYDRAULIC CARTRIDGE VALVES

HYDRAULIC CARTRIDGE VALVES HYDRAULIC CARTRIDGE VALVES SOLENOID OPERATED DIRECTIONAL CONTROLS PROPORTIONAL CONTROLS MOTORIZED CONTROLS MECHANICAL DIRECTIONAL CONTROLS MECHANICAL PRESSURE CONTROLS MECHANICAL FLOW CONTROLS FEBRUARY

More information

Direct solenoid and solenoid pilot operated valves

Direct solenoid and solenoid pilot operated valves Direct solenoid and solenoid pilot operated valves Individual mounting Series Inline Oval shaped armature Encapsulated coil Push pin onded balanced poppet Return spring Manifold mounting Stacking plug-in

More information

Genesis Series Valves Parts List / Service Instructions

Genesis Series Valves Parts List / Service Instructions Genesis Series Valves Parts List / Service Instructions INDEX PAGE General Warnings and Cautions......................................................... 2 Model Number Index...................................................................

More information

SD2E-A3. Functional Description. 3/2 Way Solenoid Operated Directional Control Valves Spool Type HA /2013. Replaces HA /2012

SD2E-A3. Functional Description. 3/2 Way Solenoid Operated Directional Control Valves Spool Type HA /2013. Replaces HA /2012 3/2 Way Solenoid Operated Directional Control Valves Spool Type SD2E-A3 3/4-6 UNF p max 350 bar (5076 PSI) Q max 30 L/min (7.9 GPM) HA 404 /203 Replaces HA 404 07/202 Hardened and precision working parts

More information

Proportional Flow-Control Cartridges, Size 5

Proportional Flow-Control Cartridges, Size 5 Proportional Flow-Control Cartridges, Size Q max = l/min, p max = bar, Q N = l/min at p bar Leak free, load compensated, two stage Description Series MVRPLSA two-stage proportional flow-control cartridges

More information

TECH NOTE: E Coils Field Assessment DATE: REVISION: 1.0

TECH NOTE: E Coils Field Assessment DATE: REVISION: 1.0 TECH NOTE: 11-7 TITLE: E Coils Field Assessment DATE: 3-17-11 REVISION: 1. Description: this process describes the field assessment of Hydra Force E Coils in mobile for spreader valves. Background: Hydra

More information

Solenoid valves. Poppet and Spool type solenoid actuated valves for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm)

Solenoid valves. Poppet and Spool type solenoid actuated valves for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm) Hydraulic Screw-in Cartridge Valves (SiCV) Solenoid valves Poppet and Spool type solenoid actuated valves for applications up to 5 bar (5 psi) and 7 L/min (6 USgpm) Solenoid valves SOLENOID VLVES...- SV5-8-C/CM

More information

CUSTOM ENGINEERED SWITCHES. Engineered Solutions for The Most Severe Pressure, Vacuum and Temperature Applications

CUSTOM ENGINEERED SWITCHES. Engineered Solutions for The Most Severe Pressure, Vacuum and Temperature Applications CUSTOM ENGINEERED SWITCHES Engineered Solutions for The Most Severe Pressure, Vacuum and Temperature Applications PRESSURE SWITCHES 8 SQ Low Pressure Switch 9 SM Low Pressure Switch 10 MM Low Pressure

More information

COILS AND CONNECTORS. Atlantic Fluid Tech SECTION 21. Rev. 10/ Connector Page class

COILS AND CONNECTORS. Atlantic Fluid Tech SECTION 21. Rev. 10/ Connector Page class SECTION 21 COILS AND CONNECTORS Type Heat insulation Connector Page class Coil M7 HS M7 - For solenoid operated cartridge valve H - 1 C EN 175301-3 - DIN 450 - ISO 4400 21.00.010 Coil M7 HS M7 - For solenoid

More information

Directional Control Valves Accessories

Directional Control Valves Accessories Plugs Description Plug EN 175301-803 *, style AF Protection class IP 65 for voltages up to 50V Plug with LED V DC Plug with lamp insert 10V AC Plug with lamp insert 30V AC Cable connection PG 9 PG 11 PG

More information

Chapter 6: Check Valves

Chapter 6: Check Valves Contents Chapter : Check Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 0 10 1 25 32 Subplate Screw-in Slip-in Shuttle valves SSR -2 Check valves, direct operated

More information

5-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow, for two pumps systems

5-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow, for two pumps systems 5-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow, for two pumps systems RE 18309-54/04.10 1/6 Replaces: RE 00171/02.07 A-VRFC3C-VEI-VS 0M.43.12.80 - Y - Z

More information

Directional Control Valves. General Description. Features. Specifications

Directional Control Valves. General Description. Features. Specifications Technical Information General Description directional control valves are high-performance, 4-chamber, direct operated, wet armature, solenoid controlled, 3 or 4-way valves. They are available in 2 or 3-position

More information

740 SERIES. hydraulics. Sun FLeX Series Low- & High-Power Coils LOW- & HIGH-POWER COILS: DC & AC VERSIONS WITH DIN & DEUTSCH CONNECTORS

740 SERIES. hydraulics. Sun FLeX Series Low- & High-Power Coils LOW- & HIGH-POWER COILS: DC & AC VERSIONS WITH DIN & DEUTSCH CONNECTORS hydraulics Sun FLeX Series Low- & High-Power Coils FLeX COMPATIBLE Works with Sun FLeX Series Solenoid Valves SIX COIL VOLTAGES 12, 14, 24, 28 Vdc 115/230 Vac CONNECTOR OPTIONS DIN & Deutsch OPTIMIZED

More information

Electrically Operated Pressure Relief Cartridge, Size 1 Seated Design, Direct Acting Series WUVA 1LO...

Electrically Operated Pressure Relief Cartridge, Size 1 Seated Design, Direct Acting Series WUVA 1LO... Electrically Operated Pressure Relief Cartridge, Size Seated Design, Direct Acting Series WUVA LO....5 l/min, 40 bar Wet armature solenoid with high pressure core tube and slip on coil Coils can be changed

More information

DOUBLE, P.O. CHECK VALVES (PRE-ENGINEERED BLOCKS)

DOUBLE, P.O. CHECK VALVES (PRE-ENGINEERED BLOCKS) DOUBLE, P.O. CHECK VALVES (PRE-ENGINEERED BLOCKS) SERIES DOUBLE PILOT OPERATED CHECK VALVE... HS3 Page HD1 Page HD2 SERIES DOUBLE PILOT OPERATED CHECK VALVE GPM PSI LPM BAR CAVITY MODEL PAGE 5 3500 19

More information

CLS100 Proportional Load Sensing Mobile Valve

CLS100 Proportional Load Sensing Mobile Valve Mobile Valves Proportional - Load Sensing Model CLS100 350 bar 100 L/min Up to 10 sections Eaton Pro-FX TM Compliant CLS100 Proportional Load Sensing Mobile Valve Overhaul manual / Trouble shooting guide

More information

TRANSMISSION VALVES Slip-in configuration

TRANSMISSION VALVES Slip-in configuration TRANSMISSION VALVES Slip-in configuration MINI SERIES Electro-Hydraulic Control Valves / Automotive Type STD CAVITY RANGE Proportional Pressure Reducing-Relieving Valves / Direct Acting MID RANGE Proportional

More information

Direct solenoid and solenoid pilot operated valves

Direct solenoid and solenoid pilot operated valves Direct solenoid and solenoid pilot operated valves Individual mounting Series Inline Oval shaped armature Encapsulated coil Push pin Manifold mounting Stacking Manifold base plug-in Manifold base plug-in

More information

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX: SPECIFICATIONS D03 Pattern Directional Control Valves Also refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONTACT INFORMATION USA Headquarters Dynex/Rivett

More information

DG 060 DG 061 DG 062 DG 063 DG 064 for Pressure and High Pressure Filters Operating pressure up to 600 bar Response/switching pressure up to 5,0 bar

DG 060 DG 061 DG 062 DG 063 DG 064 for Pressure and High Pressure Filters Operating pressure up to 600 bar Response/switching pressure up to 5,0 bar Clogging Indicators DG 060 DG 061 DG 062 DG 063 DG 064 for Pressure and High Pressure Filters Operating pressure up to 600 bar Response/switching pressure up to 5,0 bar Description Application Monitoring

More information

unrestricted; preferably with coil at bottom (auto. air bleed) 12 or 24 Volt DC from an electronic controller Deutsch plug - IP67

unrestricted; preferably with coil at bottom (auto. air bleed) 12 or 24 Volt DC from an electronic controller Deutsch plug - IP67 3 Technical data General characteristics Design Flow direction Seals De-energized position Mounting attitude Description, value, unit line mounting P A controlled P R surplus flow discharge (models shown

More information

Proportional Pressure Reducing Valve, Size 16 Series DRPSB 5B...

Proportional Pressure Reducing Valve, Size 16 Series DRPSB 5B... Proportional Pressure Reducing Valve, Size 16 Series DRPSB B... l/min, bar External pilot drain to port 3 Surface protection: Cartridge is chromited, Cr VI free Very stable operation Coil can be changed

More information

Electrically Operated Pressure Reducing Cartridge, Size 16 Seated Pilot Stage, Spool Type Main Stage Series WDRVPA 5...

Electrically Operated Pressure Reducing Cartridge, Size 16 Seated Pilot Stage, Spool Type Main Stage Series WDRVPA 5... Electrically Operated Pressure Reducing Cartridge, Size 16 Seated Pilot Stage, Spool Type Main Stage Series WDRVPA... 2 l/min, 3 bar Two pressure valve, HI / LO External pilot drain to port 3 Surface protection:

More information

Chapter 10: Valves for Pipe Mounting

Chapter 10: Valves for Pipe Mounting Contents Chapter : Valves for Pipe Mounting Series Description Size Body Page DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 1¼ 1½ 2 L-port T-port Pressure valves, manual operation R4V R4R Pressure relief function Pressure

More information

Engineering Information. Solenoid Valves Principles of Operation. Solenoid Valves. Direct Acting Valves (Figures 1A, 1B)

Engineering Information. Solenoid Valves Principles of Operation. Solenoid Valves. Direct Acting Valves (Figures 1A, 1B) 4 Engineering Information Principles of Operation A solenoid valve is a combination of two basic functional units: A solenoid (electromagnet) with its core A valve body containing one or more orifices

More information

Electrically Operated Pressure Relief Cartridge, Size 16 Seated Pilot Stage, Spool Type Main Stage Series WUVPA 1...

Electrically Operated Pressure Relief Cartridge, Size 16 Seated Pilot Stage, Spool Type Main Stage Series WUVPA 1... Electrically Operated Pressure Relief Cartridge, Size 16 Seated Pilot Stage, Spool Type Main Stage Series WUVPA 1... 3 l/min, 420 bar Two pressure valve, ON / OFF or HI / LO With internal pilot drain to

More information

3/8 & 1/2 NPT. with 3/8 and 1/2 NPT ports for 4 Way - 2 & 3 Position see Pg locate counterbores in body to control static squeeze on seals.

3/8 & 1/2 NPT. with 3/8 and 1/2 NPT ports for 4 Way - 2 & 3 Position see Pg locate counterbores in body to control static squeeze on seals. 8 SERIES /8 Ported Air Valves 1/ Ported Air Valves /8 & 1/ 1, 1A, 1B & 8 Series Note! Spring return & spring centered models NOT suitable for dry air service. Features & Way - Position. Way - &. operator

More information

SOLENOID VALVES NFPA D03 NFPA D05 D03 & D05 SERIES 35- SOLENOID VALVES. Features. Internal Structure NFPA SIZE: D03 & D05

SOLENOID VALVES NFPA D03 NFPA D05 D03 & D05 SERIES 35- SOLENOID VALVES. Features. Internal Structure NFPA SIZE: D03 & D05 Series 35 High Flow High Pressure Directional Valves D05S Electrical Box Type D03S Electrical Box Type D03SDS Deutsch Socket (D03 Only) D05SD DIN Type D03SD DIN Type D03SL Lead Wire Type (D05SL Lead Wire

More information

Catalog HY /US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI

Catalog HY /US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI Catalog HY15-352/US Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI PRESSURE RELIEVING AP1B2YP... 2G... Increase /Increase Current...5.3/1.4... 35/5... 7-8 AP2B2YP... C8-2...

More information

D4SL. Safety Interlock Switches. Compact 6-Contact Guard Lock Safety-Door Switch NEW! Specifications. Standards and EC Directives

D4SL. Safety Interlock Switches. Compact 6-Contact Guard Lock Safety-Door Switch NEW! Specifications. Standards and EC Directives Safety Interlock Switches DSL Compact -Contact uard Lock Safety-Door Switch Two types are available: a connector type that reduces wiring time and a detachable terminal block type. Robust and durable metal

More information

Prop. directional seated valve type EM 21 DE and EM 21 DSE intended as pilot valve

Prop. directional seated valve type EM 21 DE and EM 21 DSE intended as pilot valve Prop. directional seated valve type EM 21 DE and EM 21 DSE intended as pilot valve Operation pressure p max = 420 bar Flow Q max = 3.5 lpm See also: Directional seated valves type EM and EMP D 7490/1 Prop.

More information

Chapter 6: Check Valves

Chapter 6: Check Valves Contents Chapter : Check Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 0 10 1 25 32 Subplate Screw-in Slip-in SSR RK / RB CS SPZBE SPV / SPZ C4V CPS C4V D4S

More information

Electric Actuators Maximum in-lbs

Electric Actuators Maximum in-lbs Maximum 14040 in-lbs NEMA 4, 4X, 7 ER- Series Features ISO / DIN valve interface Mounting in any position Thermal overload protection (AC & DC except 12 VDC) Friction brake (standard for AC motors except

More information

Série D3 Válvula Direcional CETOP 5 e NG 10. Catálogo HY /US

Série D3 Válvula Direcional CETOP 5 e NG 10. Catálogo HY /US Série D3 Válvula Direcional CETOP 5 e NG 10 Catálogo HY14-2502/US Catalog HY14-2502/US Introduction pplication Series D3 hydraulic directional control valves are high performance, direct operated 4-way

More information

Seated valves 500 bar

Seated valves 500 bar Seated valves 500 bar Type WVM-6I Features Solenoid actuated and direct operated Leakage free in every direction (double tight) High operational safety and reliable switching High duty cycles and long

More information

Electric Actuators Maximum in-lbs

Electric Actuators Maximum in-lbs Maximum 14040 in-lbs NEMA 4, 4X, 7 ER- Series Features ISO / DIN valve interface Mounting in any position Thermal overload protection (AC & DC except 12 VDC) Friction brake (standard for AC motors except

More information

3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow

3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow 3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow A-VRFC3C-VEI-VS 0M.43.20.80 - Y - Z RE 18309-3 Edition: 03.2018 Replaces: 03.2016 Technical data Description

More information

V200 Positioner. V200 P Pneumatic Positioner. V200 E Electropneumatic Positioner. Housing Material: Cast aluminium with polyester coating

V200 Positioner. V200 P Pneumatic Positioner. V200 E Electropneumatic Positioner. Housing Material: Cast aluminium with polyester coating V200 Positioner Housing Material: Cast aluminium with polyester coating Indicator Options: Flat pointed indicator or raised indicator (red/green or yellow/black) One housing for pneumatic or electropneumatic

More information

Direct solenoid and solenoid pilot operated valves

Direct solenoid and solenoid pilot operated valves Direct solenoid and solenoid pilot operated valves Individual mounting Series inline inline hazardous location Manifold mounting 35 sub-base non plug-in sub-base with pressure regulators sub-base hazardous

More information

Coils and electronic controls

Coils and electronic controls Hydraulic Screw-in artridge Valves (SiV) oils and electronic controls Solenoid valve and Proportional valve coils and electronic controls for proportional valves oils and electronic controls TOUGHOILS...-5

More information

CATALOG OF REPLACEMENT PARTS C24EA SERIES STEAMER 3-PAN BASIC. ML /240 V. 8.5kW ML V. 8.5kW 3-PAN PRO

CATALOG OF REPLACEMENT PARTS C24EA SERIES STEAMER 3-PAN BASIC. ML /240 V. 8.5kW ML V. 8.5kW 3-PAN PRO CATALOG OF REPLACEMENT PARTS C24EA SERIES STEAMER 3-PAN BASIC ML-136043 208/240 V. 8.5kW ML-136045 480 V. 8.5kW 3-PAN PRO ML-136037 208/240 V. 9.25kW ML-136044 480 V. 9.25kW ML-152030 3-PAN LWE 5-PAN BASIC

More information

Temperature Sensor MBT Technical brochure

Temperature Sensor MBT Technical brochure Temperature Sensor MBT 3270 Technical brochure Features OEM Temperature Sensor program Various sensor elements available (RTD, NTC, PTC) Robust, high protection against moisture Fixed measuring insert

More information

Port Flow Rate/ Function Series Actuators Page Number Size Factor

Port Flow Rate/ Function Series Actuators Page Number Size Factor Section dex Port Flow Rate/ Function Series Actuators Page Number Size Factor 0- Cv = 0.05 Way Modular Solenoid. -. & to Way Manifold /8 NPT Cv = 0. Way, Position Modular /8 NPT Cv = 0.05 Way Hex Solenoid.5.6

More information

CATALOG OF REPLACEMENT PARTS

CATALOG OF REPLACEMENT PARTS CATALOG OF REPLACEMENT PARTS C24GA6 & C24GA10 Gas Convection Steamers C24GA6 ML-136056 C24GA10 ML-136057 C24GA6 ML-136021 C24GA10 ML-136022 VULCAN-HART DIVISION OF ITW FOOD EQUIPMENT GROUP, LLC 3600 NORTH

More information

97100 Inline 3/2, 5/2 & 5/3 spool valves electromagnetic actuated, indirectly controlled G 1/4, 1/4 NPT

97100 Inline 3/2, 5/2 & 5/3 spool valves electromagnetic actuated, indirectly controlled G 1/4, 1/4 NPT 97 Inline /, 5/ & 5/ spool valves electromagnetic actuated, indirectly controlled G /, / NPT For single and double operated actuators Crossover-free switching, switch-over function guaranteed even with

More information

Proportional Directional Control Cartridge Valves: PSV10-34 & PSV12-34

Proportional Directional Control Cartridge Valves: PSV10-34 & PSV12-34 Control Cartridge Valves: PSV10-34 & PSV12-34 SCHEMATIC PRESSURE* FLOW CAVITY COIL Page 2 PSV10-34-02 250 BAR 3600 PSI 22 LPM 6 GPM SDC10-4 M16-26W R16-20W Page 4 PSV12-34-02 260 BAR 3770 PSI 50 LPM 13

More information

MS Application. Features. Proportional Valve Actuator General Instructions

MS Application. Features. Proportional Valve Actuator General Instructions Proportional Valve Actuator Application The Proportional Valve Actuator is a non-spring return actuator used with proportional to 10 Vdc or 4 to 0 ma controllers and standard 1/" to 1-1/4" two-way and

More information

Vickers. Proportional Valves. EPV10 Series. Proportional Flow Controls. Released 6/95

Vickers. Proportional Valves. EPV10 Series. Proportional Flow Controls. Released 6/95 Vickers Proportional Valves EPV1 Series Proportional Flow Controls Released 6/95 715 Table of Contents Features and Benefits..............................................................................

More information

Mobile Directional Valve. Product Catalog MDG for Mobile Equipment Flows to 60 I/min (15.8 USgpm)

Mobile Directional Valve. Product Catalog MDG for Mobile Equipment Flows to 60 I/min (15.8 USgpm) Mobile Directional Valve Product Catalog MDG for Mobile Equipment Flows to 60 I/min (15.8 USgpm) Table of Contents General Information...3 Model code Valve Section...4 Valve Assembly...5 Spool Data...6

More information

K Series 3 Way Direct Acting Balanced Poppet Solenoid Valve

K Series 3 Way Direct Acting Balanced Poppet Solenoid Valve Ex d Ex m IP5 Series 3 Way Direct Acting Balanced Poppet Solenoid Valve DB2S-M2C \ Ex d IIC with Integral Stainless \ Steel Junction Box. \ Valve. \ Manual Override, Option M2. J77072S-M2 \ Ex m II NASS

More information

Heavy Duty Hydrostatic Transmissions

Heavy Duty Hydrostatic Transmissions Heavy Duty Hydrostatic Transmissions Features and Benefits Typical Applications Construction Transit Mixer Road Roller Paver Motor Grader Loader Dozer Material Handling & Utility Crane Sweeper Lift Truck

More information

Direct solenoid and solenoid pilot operated valves

Direct solenoid and solenoid pilot operated valves Direct solenoid and solenoid pilot operated valves Individual mounting Series Inline Sub-base non plug-in Sub-base plug-in Manifold mounting Sub-base non plug-in Sub-base plug-in 33 34 36 32 onded spool

More information

Catalog HY /US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI

Catalog HY /US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI Catalog HY15-351/US Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI PRESSURE RELIEVING AP1B2YP... 2G... Increase /Increase Current...5.3/1.4... 35/5... 7-8 AP2A2... C8-2... Increase

More information

DL /118 ED SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT VERSION SUBPLATE MOUNTING ISO p max 280 bar Q max 50 l/min

DL /118 ED SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT VERSION SUBPLATE MOUNTING ISO p max 280 bar Q max 50 l/min 41 211/118 ED DL3 SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT VERSION SUBPLATE MOUNTING ISO 4401-03 p max 280 bar Q max 50 l/min MOUNTING SURFACE OPERATING PRINCIPLE ISO 4401-03-02-0-05 (CETOP

More information

DIRECTIONAL CONTROL VALVE SOLENOID OPERATED TYPE HD3-ES-*-/10 CETOP MPa HD3 - ES - (1) (C) - * - (024C) (-) / 10

DIRECTIONAL CONTROL VALVE SOLENOID OPERATED TYPE HD3-ES-*-/10 CETOP MPa HD3 - ES - (1) (C) - * - (024C) (-) / 10 table HD-0/ (07/0) DIRECTIONAL CONTROL VALVE SOLENOID OPERATED TYPE HD-ES-*-/0 CETOP 0-5 MPa /5 HOW TO READ THE MODEL CODE FOR HD-ES - Pressure 5 MPa (50 bar) HD - ES - () (C) - * - (0C) (-) / 0 5 6 7

More information

Functional Description

Functional Description 4/2 Way Solenoid Operated Directional Control Valves Spool SD2E-A4 Type 3/4-16 UNF p max 350 bar (5076 PSI) Q max 30 L/min (7.9 GPM) 01/2005 4/2 Way cartridge valves solenoid operated spool directed Manual

More information

Cartridge Valves Technical Information Directional Valves DCV 03

Cartridge Valves Technical Information Directional Valves DCV 03 OVERVIEW DCV 03 directional control valves consist of: housing (1), control spool (5), with two centering springs (4), and cylindrical operating solenoids (2, 3). The three-position directional valves

More information

2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm

2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm / or 3/-way Solenoid Valve, with pivoted armature and isolating diaphragm Type 0330 can be combined with Lockable manual override as standard For liquid, gaseous and aggressive media Long service life,

More information

Electrically operated valves Series KM-09, 5/2- and 5/3-way G1/8 680 to 950 Nl/min (0.691 to Cv)

Electrically operated valves Series KM-09, 5/2- and 5/3-way G1/8 680 to 950 Nl/min (0.691 to Cv) Electrically operated valves Series KM-09, 5/2- and 5/3-way G1/8 680 to 950 Nl/min (0.691 to 0.966 Cv) Order code Series and function KM-09-510-HN-442 Standard coils HN at ports 2 + 4 HN at ports 1, 3

More information

Electronic Proportional (EP) Control for Heavy Duty Series 2 Piston Pumps Model 33

Electronic Proportional (EP) Control for Heavy Duty Series 2 Piston Pumps Model 33 Electronic Proportional (EP) Control for Heavy Duty Series 2 Piston Pumps Model 33 Model 39 Model 46 Model 54 Model 64 EP Control for Heavy Duty Series 2 Piston Pumps Table of Contents Introduction........................................................................

More information

CLS180 Proportional Load Sensing Mobile Valve

CLS180 Proportional Load Sensing Mobile Valve Mobile valves Proportional Load Sensing, Model CLS180 350 bar 180 L/min Up to 10 sections Eaton Pro-FX TM Ready CLS180 Proportional Load Sensing Mobile Valve Overhaul manual / Trouble shooting guide Contents

More information

OEM Pressure transmitter for industrial applications Type MBS Technical brochure

OEM Pressure transmitter for industrial applications Type MBS Technical brochure OEM Pressure transmitter for industrial applications Type MBS 1200 Technical brochure Features Designed for use in severe industrial OEM applications For medium and ambient temperatures up to 125ºC All

More information

INSTALLATION DIMENSIONS

INSTALLATION DIMENSIONS ACCESSORIES & OTHERS PRESURE GAGE INSTALLATION DIMENSIONS UNIT mm(inch) LM TYPE CBM TYPE CBM-F TYPE MODEL B B1 D D1 D2 G H T d R G40LM 28.1(0.86) φ48(1.9) φ41.7(1.6) 8(0.31) 58.7(2.31) 1/8" G40CBM 26(1.02)

More information

Rosemount 8750WA Magnetic Flowmeter System For Water and Wastewater Industries

Rosemount 8750WA Magnetic Flowmeter System For Water and Wastewater Industries Product Data Sheet January 214 813-1-475, Rev FA Rosemount 875WA Magnetic Flowmeter System For Water and Wastewater Industries THE 875WA MAGNETIC FLOWMETER Rosemount reliability in a customized offering

More information

Electronic Proportional (EP) Control for Medium Duty Piston Pumps

Electronic Proportional (EP) Control for Medium Duty Piston Pumps Electronic Proportional (EP) Control for Medium Duty 72400 Piston Pumps EP Control for Medium Duty 72400 Piston Pumps Table of Contents Introduction........................................................................

More information

40 l/min (11 GPM) p max

40 l/min (11 GPM) p max Proportional Directional Control Valve, with Analog Control Electronics PRM2-06 Functional Description Size 06 (D03) Q max 40 l/min (11 GPM) p max 350 bar (5100 PSI) Technical Features Direct acting, proportional

More information

Electrically operated valves Series M-07, 3/2-, 5/2- and 5/3-way G1/ and 1580 Nl/min (1.321 and Cv)

Electrically operated valves Series M-07, 3/2-, 5/2- and 5/3-way G1/ and 1580 Nl/min (1.321 and Cv) Electrically operated valves Series M-07, 3/2-, 5/2- and 5/3-way G1/4 1300 and 1580 Nl/min (1.321 and 1.606 Cv) Order code Series and function M-07-310-HN-442 Standard coil HN at port 2 + 4 HN at port

More information

Air Line Filtration Accessories. Bulletin /USA. Finite

Air Line Filtration Accessories. Bulletin /USA. Finite Air Line Filtration Accessories Bulletin 1300-150/USA Finite Finite s Featured Air Line Filtration Accessories For a comprehensive list and to find out where these accessories are used, please see pages

More information

Actuated Valves PRICING

Actuated Valves PRICING Electric & Pneumatic Actuated Valves Actuated Valves PRICING Page Suitable for Oil-Free air handling to 5 psi, not for distribution of compressed air or gas Spears Manufacturing Company Due to Material

More information

Mini 1. Compact High Flow 3-Way and 4-Way Pneumatic Directional Control Valves

Mini 1. Compact High Flow 3-Way and 4-Way Pneumatic Directional Control Valves Catalog LX-530 Mini 1 Compact High Flow and Pneumatic Directional Control Valves FEATURES: 3-port or 5-port bodies Manual, Air Pilot, Solenoid or Mechanical Operators Two-position, Single or Dual Actuation

More information

Flow Control Valve. 1 Description. 2 Symbols. Series SRCA General. 1.2 Application examples way flow control way flow control

Flow Control Valve. 1 Description. 2 Symbols. Series SRCA General. 1.2 Application examples way flow control way flow control Flow Control Valve Series SRC.. plug-in coil for easy coil change flow rates are unaffected by changes in temperature or load compact design reduced p ZnNi coating (>70h DIN EN ISO 97 NSS) Description.

More information

ICG Switchgear Price List 2009

ICG Switchgear Price List 2009 ICG Switchgear Price List 2009 Section 1 Control Gear Page Contactors (AC,DC & Modular) 2,3 Overload Relays 4 Product Accessories 4,5 Starters-DOL, Star-Delta, Fan/Vibrators, Reversing/Twin 6,7 Section

More information

Temperature sensor Type MBT 3270

Temperature sensor Type MBT 3270 Data sheet Temperature sensor Type MBT 3270 The flexible temperature sensor MBT 3270 can be used in many industrial applications such as: Air Compressors, Mobile Hydraulics and Exhaust gas return systems.

More information

P1X Series. Compact Rodless Air Cylinders Contents

P1X Series. Compact Rodless Air Cylinders Contents Compact DL RC P1Z P1X OSP-P Contents Features and Benefits... 130 Ordering Information... 131 Specifications, Weights and Forces... 132 Technical Data... 133-136 Sensor Adapter Bracket... 137 Basic Dimensions...

More information

CATALOG OF REPLACEMENT PARTS C24GA6 & C24GA10 GAS CONVECTION STEAMERS PRIOR MLS COVERED IN THIS MANUAL

CATALOG OF REPLACEMENT PARTS C24GA6 & C24GA10 GAS CONVECTION STEAMERS PRIOR MLS COVERED IN THIS MANUAL CATALOG OF REPLACEMENT PARTS C24GA6 & C24GA10 GAS CONVECTION STEAMERS C24GA6 C24GA10 ML-136056 ML-136057 PRIOR MLS COVERED IN THIS MANUAL C24GA6 C24GA10 ML-136021 ML-136022 For additional information on

More information

DM2500 Series. Flanged Ball Valves SPECIFICATIONS ORDERING SCHEMATIC

DM2500 Series. Flanged Ball Valves SPECIFICATIONS ORDERING SCHEMATIC DM2500 Series Flanged Ball Valves SPECIFICATIONS Available in stainless steel or carbon steel Body and ends are investment cast Self-adjusting stem packing Blow-out proof stem design 100% air tested under

More information

3-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow

3-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow 3-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow A-VRFC3C-VEI-VS-LS 0M.43.21.80 - Y - Z RE 18309-63 Edition: 03.2018 Replaces: 03.2016 Technical

More information

MOUNTING BRACKETS. Dimensional Drawing - Mounting Options

MOUNTING BRACKETS. Dimensional Drawing - Mounting Options / MOUNTING BRACKETS Dimensions: mm Dimensional Drawing - Mounting Options Series Side Mounting Brackets Kit: PAT503860001 Series Side Mounting Brackets Kit: PAT503860002 E G F C D ØH B A Series A B C D

More information

SV9A-10-E - Solenoid Valve 4-way, 3-position spool type solenoid valve Up to 36 L/min (9.5 USgpm) 210 bar (3000 psi)

SV9A-10-E - Solenoid Valve 4-way, 3-position spool type solenoid valve Up to 36 L/min (9.5 USgpm) 210 bar (3000 psi) SV9--E - Solenoid Valve -way, -position spool type solenoid valve Up to 6 L/min (9.5 USgpm) bar ( psi) () () (P) (T) In the de-energized position all ports are closed. When solenoid '' is energized flow

More information

Direct solenoid and solenoid pilot operated valves

Direct solenoid and solenoid pilot operated valves Direct solenoid and solenoid pilot operated valves Individual mounting Series Inline Manual operator Solenoid 4-way pilot with balanced poppet Air return 33 34 36 3 37 38 5 67 69 44 46 4 47 48P SERIES

More information