GROUP C. Apparatus Bushing.
|
|
|
- Evelyn Ford
- 5 years ago
- Views:
Transcription
1 GROUP C Apparatus Bushing Tel : ~3 FAX :
2 Epoxy Bushing for 25kV 630A APPARATUS BUSHING (125kV BIL) apparatus bushing K650P2 K650P2 will accept an elbow connectors designed for applicable ANSI/IEEE standards. The apparatus bushings are designed to be directly mounted in electrical apparatus on 630Amp, 25kV systems. PYUNGIL K650P2 bushing has the sensor ring device used for voltage detection inside of the bushing for automated remote control system. The bushing meets the full requirements of IEEE Std Typical applications would be in: T ransformer P ole-mounted Switch-gear PYUNGIL's apparatus bushings are for in-oil or SF6 gas applications. The bushing is molded of epoxy and fixed with the bolts. In installation, no special tools are required. Refer to PYUNGIL's installation instruction AC 60Hz 1Minute Withstand : 40kV Minimum Corona Voltage Level : 18kV Ph ysical Inspection P eriodic Dissection P eriodic Fluoroscopic Analysis (X-ray) Gas Leakage Test VOLTAGE System Voltage : 25 kv Impulse Voltage, wave : 125 kv Withstand, 60Hz, 1min : 60 kv Withstand, DC, 15min : 78 kv Corona Extinction : 23 kv CURRENT Continuous (RMS) : 630 A 8 Hour Overload (RMS) : 900 A Short-time sym., 0.17sec (RMS) : 25 ka Short-time sym., 3sec (RMS) : 10 ka
3 Cat. No. C0203 Aug kV 630A EPOXY APPARATUS BUSHING(125kV BIL) Tightly cross-linked molecular structure with exceptionally high mechanical, electrical, thermal and chemical resistance properties. Molded epoxy exerts uniform concentric pressure on insulation of mating parts to provide required creep-path length and waterseal. - Positions cable contact and mates with product accessories having studs. - A 5/8-11UNC-2A stud permits internal connection to apparatus. Detects the voltage which enables distribution automation Home Page : Tel : ~3 FAX :
4 Epoxy Bushing for 25/35kV 630A APPARATUS BUSHING (150kV BIL) apparatus bushing K760C2 K760C2 will accept either of PYUNGIL's polymer bushings or elbow connectors designed for applicable ANSI/IEEE standards. The apparatus bushings are designed to be directly mounted in electrical apparatus on 630Amp, 25/35kV systems. PYUNGIL K760C2 bushing has the sensor ring device used for voltage detection inside of the bushing for automated remote control system. The bushing meets the full requirements of IEEE Std Typical applications would be in: T ransformer P ole-mounted Switch-gear PYUNGIL's apparatus bushings are for in-oil or SF6 gas applications. In installation, no special tools are required. The bushing is mounted through the apparatus wall and clamped externally. AC 60Hz 1Minute Withstand : 40kV Minimum Corona Voltage Level : 19kV Ph ysical Inspection P eriodic Dissection P eriodic Fluoroscopic Analysis (X-ray) Gas Leakage Test VOLTAGE System Voltage : 25/35 kv Impulse Voltage, wave : 150 kv Withstand, 60Hz, 1min : 60 kv Withstand, DC, 15min : 103 kv Corona Extinction : 26 kv CURRENT Continuous (RMS) : 630 A 8 Hour Overload (RMS) : 900 A Short-time sym., 0.17sec (RMS) : 25 ka Short-time sym., 3sec (RMS) : 10 ka
5 Cat. No. C0205 Aug /35kV 630A EPOXY APPARATUS BUSHING(150kV BIL) Metalized area allows fully shielded connection and control the electrical stress generated. Metalized area also protects the epoxy insulation from the degradation due to UV. Tightly cross-linked molecular structure with exceptionally high mechanical, electrical, thermal and chemical resistance properties. Molded epoxy exerts uniform concentric pressure on insulation of mating parts to provide required creep-path length and waterseal. - Positions cable contact and mates with product accessories having studs. - A 5/8-11UNC-2A stud permits internal connection to apparatus. Detects the voltage which enables distribution automation Home Page : Tel : ~3 FAX :
6 Epoxy Bushing for 35kV 630A APPARATUS BUSHING (170kV BIL) apparatus bushing K770C2 K770C2 will accept either of PYUNGIL's polymer bushings or elbow connectors designed for applicable ANSI/IEEE standards. The apparatus bushings are designed to be directly mounted in electrical apparatus on 630Amp, 35kV systems. PYUNGIL K770C2 bushing has the sensor ring device used for voltage detection inside of the bushing for automated remote control system. The bushing meets the full requirements of IEEE Std Typical applications would be in: T ransformer P ole-mounted Switch-gear PYUNGILl's apparatus bushings are for in-oil or SF6 gas applications. The bushing is molded of epoxy and installed with bracket to the apparatus. In installation, no special tools are required. Refer to PYUNGIL's installation instruction AC 60Hz 1Minute Withstand : 40kV Minimum Corona Voltage Level : 19kV Ph ysical Inspection P eriodic Dissection P eriodic Fluoroscopic Analysis (X-ray) Gas Leakage Test VOLTAGE System Voltage : 25/35 kv Impulse Voltage, wave : 170 kv Withstand, 60Hz, 1min : 70kV Withstand, DC, 15min : 103kV Corona Extinction : 23kV CURRENT Continuous (RMS) : 630 A 8 Hour Overload (RMS) : 900 A Short-time sym., 0.17sec (RMS) : 25 ka Short-time sym., 3sec (RMS) : 10 ka
7 Cat. No. C0206 Aug kV 630A EPOXY APPARATUS BUSHING(170kV BIL) Metalized area allows fully shielded connection and control the electrical stress generated. Metalized area also protects the epoxy insulation from the degradation due to UV. Tightly cross-linked molecular structure with exceptionally high mechanical, electrical, thermal and chemical resistance properties. Molded epoxy exerts uniform concentric pressure on insulation of mating parts to provide required creep-path length and waterseal. - Positions cable contact and mates with product accessories having studs. - A 5/8-11UNC-2A stud permits internal connection to apparatus. Detects the voltage which enables distribution automation Home Page : Tel : ~3 FAX :
8 Epoxy Bushing for 25kV 630A APPARATUS BUSHING (125kV BIL) apparatus bushing K650S1 K650S1 will accept an elbow connector designed for applicable ANSI/IEEE standards. The apparatus bushings are designed to be directly mounted in electrical apparatus on 630Amp, 25kV systems. PYUNGIL's apparatus bushings are for in-oil or SF6 gas applications. The bushing is molded of epoxy and has a stainless steel flange for welding or clamping to the apparatus. The bushing meets the full requirements of IEEE Std Typical applications would be in: T ransformer P ole-mounted Switch-gear The installation of PYUNGIL K650S1 bushing is normally done by the apparatus manufacturer in accordance with the welding guide provided by PYUNGIL. In installation, no special tools are required. AC 60Hz 1Minute Withstand : 40kV Minimum Corona Voltage Level : 18kV Ph ysical Inspection P eriodic Dissection P eriodic Fluoroscopic Analysis (X-ray) Gas Leakage Test VOLTAGE System Voltage : 25 kv Impulse Voltage, wave : 125 kv Withstand, 60Hz, 1min : 60kV Withstand, DC, 15min : 78kV Corona Extinction : 23kV CURRENT Continuous (RMS) : 630 A 8 Hour Overload (RMS) : 900 A Short-time sym., 0.17sec (RMS) : 25 ka Short-time sym., 3sec (RMS) : 10 ka
9 Cat. No. C0208 Aug kV 630A EPOXY APPARATUS BUSHING(125kV BIL) Tightly cross-linked molecular structure with exceptionally high mechanical, electrical, thermal and chemical resistance properties. Molded epoxy exerts uniform concentric pressure on insulation of mating parts to provide required creep-path length and waterseal. - Positions cable contact and mates with product accessories having studs. - A 5/8-11UNC-2A stud permits internal connection to apparatus. Material resists corrosion. Can be externally clamped or welded to apparatus. Home Page : Tel : ~3 FAX :
10 Rubber Bushing for 25/35kV 630Amp LEAD WIRE TYPE BUSHING (150kV BIL) rubber bushing PSB-760NF PYUNGIL rubber insulator, PSB-760NF and the apparatus epoxy bushing are replaceable for the existing porcelain bushing used for pole-mounted load-break switch and recloser. The rubber insulator is easily connected with any of apparatus epoxy bushings for 25kV with 150kV BIL in accordance with IEEE 386 by fixing a stud bolt into the holes of the contacts of two different bushings. PSB-760NF is very light-weighted but provides an increased creepage distance. The rubber insulator is designed in accordance with 150kV BIL of IEEE 386 Standards to fit with epoxy apparatus bushing, and on the other side there is lead wire for the easy connection with line. PSB-770F and the relevant epoxy apparatus bushing are electrically and mechanically interchangeable with the other porcelain bushings for pole-mounted switch. AC 60Hz 1Minute Withstand : 40kV Minimum Corona Voltage Level : 19kV Ph ysical Inspection P eriodic Dissection P eriodic Fluoroscopic Analysis (X-ray) VOLTAGE System Voltage : 25/35 kv Impulse Voltage, wave : 150 kv Withstand, 60Hz, 1min : 60kV Withstand, DC, 15min : 103kV Corona Extinction : 26kV CURRENT Continuous (RMS) : 630 A 8 Hour Overload (RMS) : 900 A Short-time sym., 0.17sec (RMS) : 25 ka Short-time sym., 3.00sec (RMS) : 10 ka
11 Cat. No. C0301 Aug kV 630Amp RUBBER INSULATOR(150kV BIL) Tightly cross-linked molecular structure with exceptionally high mechanical, electrical, thermal and chemical resistance properties. Molded epoxy exerts uniform concentric pressure on insulation of mating parts to provide required creep-path length and waterseal. - Positions cable contact and mates with product accessories having studs. - A 5/8-11UNC-2A stud permits internal connection to apparatus. EPR insulated Lead wire has sufficient length and flexibility so that it can easily be connected with overhead line. Home Page : Tel : ~3 FAX :
12 Rubber Bushing for 25/35kV 630Amp TERMINAL TYPE BUSHING (150kV BIL) rubber bushing PSB-770F PYUNGIL rubber insulator, PSB-770F and the apparatus epoxy bushing are replaceable for the existing porcelain bushing used for pole-mounted load-break switch and recloser. The rubber insulator is easily connected with any of apparatus epoxy bushings for 25kV with 150kV BIL in accordance with IEEE 386 by fixing a brass stud bolt into the holes of the contacts of two different bushings. PSB-770F is very light-weighted but provides an increased creepage distance. The rubber insulator is designed in accordance with 150kV BIL of IEEE 386 Standards to fit with epoxy apparatus bushing, and on the other side there is terminal lug for the easy connection with line. PSB-770F and the relevant epoxy apparatus bushing are electrically and mechanically interchangeable with the other porcelain bushings for pole-mounted switch or recloser. AC 60Hz 1Minute Withstand : 40kV Minimum Corona Voltage Level : 19kV Ph ysical Inspection P eriodic Dissection P eriodic Fluoroscopic Analysis (X-ray) VOLTAGE System Voltage : 25/35 kv Impulse Voltage, wave : 150 kv Withstand, 60Hz, 1min : 60kV Withstand, DC, 15min : 103kV Corona Extinction : 26kV CURRENT Continuous (RMS) : 630 A 8 Hour Overload (RMS) : 900 A Short-time sym., 0.17sec (RMS) : 25 ka Short-time sym., 3.00sec (RMS) : 10 ka
13 Cat. No. C0303 Aug /35kV 630Amp RUBBER INSULATOR(150kV BIL) Tightly cross-linked molecular structure with exceptionally high mechanical, electrical, thermal and chemical resistance properties. Molded epoxy exerts uniform concentric pressure on insulation of mating parts to provide required creep-path length and waterseal. - Positions cable contact and mates with product accessories having studs. - A 5/8-11UNC-2A stud permits internal connection to apparatus. According to customer's request, the shape of the terminal can be modified. Terminal is usually used on recloser in Korea. Home Page : Tel : ~3 FAX :
GROUP D. Switch & Protective device.
GROUP D Switch & Protective device PYUNGIL Bldg., 147-10, Gwanyang 2-dong, Dongan-gu, Anyang-si, Gyeonggi-do, 431-808, Korea Tel : 82-31-420-0~3 FAX : 82-31-424-7300 www.pyungil.com Pole-mounted SF Insulated
25 kv Apparatus Bushings
Page 1 2001 ELRIM Cycloaliphatic Epoxy Provides: Nontracking, self-scouring, nonweathering performance Superior dielectric strength, dielectric loss and power factor Choice of shapes allows design innovation
IEC Separable Connectors 17.5 kv/24 kv, 630A
IEC Separable Connectors 17.5 kv/24 kv, 630A Front T-Body / Coupling (Rear) T-Body Connector Application The Chardon T-Body connectors are used to terminate polymeric cable to dead front apparatus such
Deadbreak Apparatus. connectors. 600 A 15/25 kv Class GENERAL
Deadbreak Apparatus Connectors 600 A 15/25 kv Class BOL-T Deadbreak Connector Electrical Apparatus 600-30 GENERAL The Cooper Power Systems 600 A, 15/25 kv Class BOL-T Deadbreak Connector is used to terminate
25-kV Apparatus Bushings B Series (bolt-in) for Elbow to Air-Insulated Service 200 Amp, 600 Amp, 900 Amp and 1250 Amp
Page 1 2018 Grounded Metal Equipment Plate Equipment Connection Bus Bar or Other Component 15 kv or 25 kv Separable Insulated Connector (elbow) Equipment Connection Power Cable Power Cable ELRIM Cycloaliphatic
INSTALLATION PRODUCTION TESTS
Deadbreak Apparatus Connectors 600 A 15/25 kv Class Bol-T Deadbreak Connector Electrical Apparatus 600-10 GENERAL The Cooper Power Systems 600 A, 15/25 kv Class Bol-T Deadbreak Connector is used to terminate
Tests are conducted in accordance with IEEE Standard 386. ac 60 Hz 1 Minute Withstand 50
Deadbreak Apparatus Connectors 600 A 35 kv Class Bol-T Deadbreak Connector Electrical Apparatus 600-50 General The Cooper Power Systems 600 A, 35 kv Class Bol-T Deadbreak Connector is used to terminate
35-kV Apparatus Bushings B Series (bolt-in) for Elbow to Air-Insulated Service 200 Amp, 600 Amp, 900 Amp and 1250 Amp
Page 1 2018 Grounded Metal Equipment Plate Equipment Connection Bus Bar or Other Component 35 kv Separable Insulated Connector (elbow) Grounded Metal Equipment Plate Equipment Connection Bus Bar or Other
25-kV Apparatus Bushings A Series (clamp-in) for Elbow to Air-Insulated Service 200 Amp and 600 Amp
Page 1 2018 Grounded Metal Equipment Plate Equipment Connection 15 kv or 25 kv Separable Insulated Connector (elbow) Grounded Metal Equipment Plate Equipment Connection Power Cable Power Cable ELRIM Cycloaliphatic
15 kv and 25 kv Thru-Bushings
Page 1 2001 ELRIM Cycloaliphatic Epoxy Provides: Nontracking, self-scouring, nonweathering performance Superior dielectric strength, dielectric loss and power factor Choice of shapes allows design innovation
35-kV 200-kV BIL Apparatus Bushings B Series (bolt-in) for Elbow to Air-Insulated Service 200 Amp, 600 Amp, 900 Amp and 1250 Amp
Page 1 2018 Grounded Metal Equipment Plate Equipment Connection 35 kv Separable Insulated Connector (elbow) Bus Bar or Other Component Grounded Metal Equipment Plate Equipment Connection Bus Bar or Other
35-kV Thru-Bushings F Series (bolt-in) for Air-Insulated to Air-Insulated Service 200 Amp, 600 Amp, 900 Amp and 1250 Amp
Page 1 2018 Equipment Connection Bus Bar, or Grounded Metal Equipment Plate F Series Mounting Holes ELRIM Cycloaliphatic Epoxy Provides: Nontracking, self-scouring, nonweathering performance Superior dielectric
600 A 35 kv class BT-TAP deadbreak connector
Supersedes 600-55 July 2014 600 A 35 kv class BT-TAP deadbreak connector General Eaton's Cooper Power Systems 600 A 35 kv Class BT-TAP deadbreak connector is used to terminate high-voltage underground
copper stud. If a 900 A rating is desired, specify a C as the 8th digit when determining your part number (See Table 3, page 3.)
Molded Rub ber Products 600 A 35 kv Class Separable Splices Electrical Ap pa ra tus 700-31 General Cooper Power Systems 600 A, 35 kv Class Deadbreak Separable Splices are used to splice two, three or four
600 A 35 kv class separable splices
Splices Catalog Data CA650050EN Supersedes 700-31 March 2009 COOPER POWER SERIES General Eaton s Cooper Power series 600 A, 35 kv Class deadbreak separable splices are used to splice two, three or four
600 A 15 kv class T-OP II deadbreak connector
Deadbreak Apparatus Connectors CA650017EN Supersedes 600-12 February 2010 COOPER POWER SERIES 600 A 15 kv class T-OP II deadbreak connector General Eaton terminates high-voltage underground cable to transformers,
IEC Separable Connectors 36 kv and 42 kv, 630A and 1250A Front T-Body / Coupling (Rear) T-Body Connector
www.chardongroup.com IEC Separable Connectors 36 kv and 42 kv, 630A and 1250A Front T-Body / Coupling (Rear) T-Body Connector Application Chardon Front T-Body / Coupling (Rear) T-Body connectors are fully
600 A 25 kv class BT-TAP deadbreak connector
Deadbreak Connectors Catalog Data CA650001EN Supersedes January 2015 600 A 25 kv class BT-TAP deadbreak connector COOPER POWER SERIES General Eaton terminates high-voltage underground cable to transformers,
600 A 35 kv class deadbreak accessories, tools, and replacement parts
Deadbreak Connectors Catalog Data CA650006EN Supersedes 600-66 July 2014 COOPER POWER SERIES 600 A 35 kv class deadbreak accessories, tools, and replacement parts General Eaton's Cooper Power series 600
600 A 15 and 25 kv class deadbreak accessories, tools, and replacement parts
Deadbreak Connectors Catalog Data CA650007EN Supersedes March 2015 COOPER POWER SERIES 600 A 15 and 25 kv class deadbreak accessories, tools, and replacement parts General Eaton connects and assembles
Eaton s Cooper Power Systems
Page: 1 of CERTIFIED TEST REPORT Eaton s Cooper Power Systems 600 Amp - 35 kv Class Deadbreak Bushing With Internal Ground Screen Design Qualification Tests December 17, 2013 Supersedes 10/20 2013 Eaton
Molded Current-Limiting Fuse
Molded Current-Limiting provide fullrange fault current protection using specially designed fuse elements, rated through 23kV line to ground and 50kA interrupting current. Construction is modular with
ELASTIMOLD UNDERGROUND CABLE ACCESSORIES
ELASTIMOLD UNDERGROUND CABLE ACCESSORIES ELASTIMOLD FEATURES AND BENEFITS The Elastimold brand is recognised as the leading producer of premoulded cable accessory components worldwide. Utilising specially
600A Deadbreak Elbow. K656LR Elbow Connector (with Test Point) Features:
Issue Date: 07/17/2017 Page: 1 of 5 PSS- K656LR Elbow Connector (with Test ) Applications: The Elastimold K656LR (with test point) is designed to provide fully shielded, dead-front submersible cable connections
600 A 15 kv class Cleer loadbreak connector system
Loadbreak/Deadbreak Connectors CA650010EN Supersedes 600-100 April 2013 COOPER POWER SERIES 600 A 15 kv class Cleer loadbreak connector system General Eaton's Cooper Power series Cleer loadbreak connector
600 A 28 kv class Cleer loadbreak connector system
Loadbreak/Deadbreak Connectors CA650012EN Supersedes 600-102 April 2013 COOPER POWER SERIES 600 A 28 kv class Cleer loadbreak connector system General Eaton's Cooper Power series Cleer loadbreak connector
High Voltage Bushing Wells for Pad Mounted Distribution Transformers Technical Guide
1ZUA2761-500 rev. 5, 6 April 2010 High Voltage Bushing Wells for Pad Mounted Distribution Transformers Technical Guide 1ZUA2761-500 rev. 5, 6 April 2010 2 / 9 Table of contents 1 Description... 3 2 Ratings...
200 A and 600 A, 15, 25, and 35 kv junction bars for separable connectors
Loadbreak/Deadbreak Connectors CA650079EN Supersedes 650-10 December 2005 COOPER POWER SERIES and 600 A, 15, 25, and 35 kv junction bars for General Eaton designs its Cooper Power series junction bars
Solid Dielectric, Single Phase Recloser
Solid Dielectric, Single Phase Recloser Catalog O-vsp17 Viper-SP Viper-SP solid dielectric, single phase recloser combines the time-proven reliability of electronically controlled, vacuum fault interrupters
LV Bushing Oil to Air Dry Insulation PTAB-SLV832
LV Bushing Oil to Air Dry Insulation PTAB-SLV832 Technical Guide 600 V, 30 kv BIL, 600-2500 A 5/8" Integral Flange Bushing 1.0" Integral Flange Bushing 1.25" Bushing General Description The ABB low voltage
Cobra-S. Catalog Cobra-S
Cobra-S Solid Dielectric, Three Phase Reclosers Providing electronic three phase overcurrent protection for systems rated through 38kV, 800A continuous current, 12.5/16kA symmetrical interrupting Control
A 1.2 kv class externally removable secondary bushing
OEM Equipment Catalog Data CA800018EN Supersedes July 2015 COOPER POWER SERIES 3010-4515 A 1.2 kv class externally removable secondary bushing General Eaton s Cooper Power series 3010-4515 A externally
Solid Dielectric, Three Phase Reclosers CATALOG VS11
Solid Dielectric, Three Phase Reclosers Providing electronic, three phase overcurrent protection for systems rated through 38kV, 800A continuous current, 12.5kA symmetrical interrupting Reliable performance
Loadbreak Apparatus Connectors. 200 A 15 kv Class Loadbreak Elbow Connector with Optional Integral Jacket Seal GENERAL
Loadbreak Apparatus Connectors 200 A 15 kv Class Loadbreak Elbow Connector with Optional Integral Jacket Seal Electrical Apparatus 500-10-7 GENERAL The Cooper Power Systems Loadbreak Elbow Connector is
1500 kva Padmount Transformer delta Primary Voltage 208Y/120 Secondary Voltage
1500 kva Padmount Transformer 12470 delta Primary Voltage 208Y/120 Secondary Voltage Cooper Power Systems Proposal Number: BED1096719 Date: January 4, 2010 Revision 00 Item Number: 00001 Item Details Customer
Type L Cutouts. UltraSIL Polymer-Insulated and Porcelain Type L Open Distribution Cutout. Description
Type L Cutouts UltraSIL Polymer-Insulated and Porcelain Type L Open Distribution Cutout Electrical Apparatus 327-30 Description Cooper Power Systems has set a new standard of excellence for polymer distribution
1ZSE EN, REV. 7. Oil SF 6. bushings type GOEK Technical guide
1ZSE 2750-106 EN, REV. 7 Oil SF 6 bushings type GOEK Technical guide Original instruction The information provided in this document is intended to be general and does not cover all possible applications.
Guide Specification. Three-Phase Solid Dielectric Trident-SR with SafeVu Integral Visible Break
Part 1-GENERAL 1.1 DESCRIPTION Guide Specification Three-Phase Solid Dielectric Trident-SR with SafeVu Integral Visible Break The switchgear shall consist of magnetically actuated solid dielectric insulated
200 A 25 kv and 28 kv class loadbreak elbow connector with optional integral jacket seal-canadian Edition
Loadbreak Connector CA650099EN Supersedes 500-28-7C November 2011 COOPER POWER SERIES 200 A 25 kv and 28 kv class loadbreak elbow connector with optional integral jacket seal-canadian Edition General Eaton
200 A 15 kv class loadbreak elbow connector with optional integral jacket seal
Loadbreak Connectors Catalog Data CA650062EN Supersedes June 2015 COOPER POWER SERIES 200 A 15 kv class loadbreak elbow connector with optional integral jacket seal General Eaton s Cooper Power series
Loadbreak Apparatus Connectors
Loadbreak Apparatus Connectors 200 A 25 kv Class POSI-BREAK Loadbreak Elbow Connector with Optional Integral Jacket Seal* Electrical Apparatus 500-29-7 general The POSI-BREAK Loadbreak Elbow Connector
Resin Impregnated Paper Bushing, Oil to SF 6. , Type GSBK
1ZSC563-AAA en, Rev. 2 Resin Impregnated Paper Bushing, Oil to SF 6, Type GSBK Technical guide This Technical Guide has been produced to allow transformer manufacturers, and their designers and engineers,
Surge Arresters. UltraSIL Polymer-Housed Evolution (10 ka) Surge Arresters. General. Construction. features
Surge s Electrical Apparatus 235-99 General Cooper Power Systems set the standard for design, manufacturing and delivery of polymeric distribution arresters with the UltraSIL polymerhoused arrester family.
Product Description: Objective and Certification: Test Samples and Test Cable:
Product Description: The CableMate 2LBE loadbreak elbow connector and 2LBI loadbreak bushing insert are fully-shielded, fully submersible, insulated plug-in terminations for connecting underground cables
Molded Vacuum Reclosers The recloser you want, all in one package. Single- and Three-Phase Molded Vacuum Reclosers, 15 38kV
The recloser you want, all in one package. Single- and Three-Phase, 15 38kV The need for automated reclosers has never been greater, but many of today s reclosers come with penalties. They weigh too much,
Type M3 Hookstick Disconnect Switches Up to 38kV 600 or 900 Amp 40kA Momentary
14B-2 Type M3 Hookstick Disconnect Switches Up to 38kV 0 or 900 Amp 40kA Momentary Application The Chance Type M3 Disconnect Switch is a single-phase hookstick operated switch. It is for manual switching
200 A 15 kv class loadbreak elbow connector with optional integral jacket seal-canadian Edition
Loadbreak Connectors Catalog Data CA650063EN Supersedes 500-10-7C November 2011 COOPER POWER SERIES 200 A 15 kv class loadbreak elbow connector with optional integral jacket seal-canadian Edition General
Elastimold & Hi-Tech Fuse Products
In this section... Elastimold & Hi-Tech Fuse Products Elastimold & Hi-Tech Fuse Products Overview...H-62 Elastimold Fused Loadbreak Elbows (FLE)... H-63 H-67 Elastimold Molded Current-Limiting Fuses (MCLF)...
M-Force three-phase switch
Supersedes K-SEC 926 December 2012 M-Force three-phase switch Description The M-Force switch from Eaton's Cooper Power Systems is a distribution-class, gangoperated, factory unitized three-phase overhead
25kV 200A Loadbreak Bushing Insert and Elbow Design Test Report. Report Number:
25kV 200A Loadbreak Bushing Insert and Elbow Design Test Report Report Number: Date: RN-R7604 9/16/2013 Table of Contents I. OBJECTIVE... 2 II. SUMMARY... 2 III. CONCLUSION... 2 IV. CABLE DATA... 2 V.
3M Electrical Markets Division Loadbreaks Deadbreaks Junctions Surge Arresters Disconnectable Joints 3 3M is the exclusive distributor for Richards Medium Voltage cable accessories in Canada. www.richards-mfg.com
DAQO Technical Differences of Isolated Phase Bus Standards. Study of Design Standard Variances, Insulator Design and Shipping Section Design
DAQO Technical Differences of Isolated Phase Bus Standards Study of Design Standard Variances, Insulator Design and Shipping Section Design Global Reference Medium Voltage Electrical Equipment Standards
Resin Impregnated Paper Bushing, Oil to Air, Type GSB Technical guide
1ZSC000563-AAC en, Rev. 2 Resin Impregnated Paper Bushing, Oil to Air, Type GSB Technical guide This Technical Guide has been produced to allow transformer manufacturers, and their designers and engineers,
Edison modular fuse, vault application products
Fusing Equipment Catalog Data CA132025EN Supersedes 240-92 October 2008 Edison modular fuse, vault application products COOPER POWER SERIES Description Eaton s Cooper Power series Edison modular fuses
Surge Arresters. UltraSIL Polymer-Housed VariSTAR Surge Arresters: Normal-Duty (5 ka), Heavy-Duty (10 ka), and Heavy-Duty Riser Pole (10 ka)
Surge s UltraSIL Polymer-Housed VariSTAR Surge s: Normal-Duty (5 ka), Heavy-Duty (10 ka), and Heavy-Duty Riser Pole (10 ka) Electrical Apparatus 235-35 General Cooper Power Systems has set the standard
Transformer bushings, type GOH. Technical guide
Transformer bushings, type GOH Technical guide This Technical Guide has been produced to allow transformer manufacturers, and their designers and engineers, access to all the technical information required
200 A 25 and 28 kv class POSI-BREAK loadbreak elbow connector with optional integral jacket seal-canadian Edition
Loadbreak Connectors CA650101EN Supersedes 500-29-7C November 2011 COOPER POWER SERIES 200 A 25 and 28 kv class POSI-BREAK loadbreak elbow connector with optional integral jacket seal-canadian Edition
CERTIFIED TEST REPORT. Cooper Power Systems. 25 kv Class 200 Amp 15.2/26.3 kv SEPARABLE CONNECTOR SYSTEM
CP No.: CP9806 Page: 1 of 35 CERTIFIED TEST REPORT Cooper Power Systems 25 kv Class 200 Amp SEPARABLE CONNECTOR SYSTEM Includes Cooper POSI-BREAK Loadbreak Elbow and Insulated Protective Cap April 3, 1998
Quick Splice II. 35 kv Molded Rubber Inline Splicing Kit Data Sheet. 2. Applications. 1. Product Description
Quick Splice II 5461 (CN) Cable (JCN) Cable 35 kv Molded Rubber Inline Splicing Kit Data Sheet Accessory Splice Jacket 1. Product Description The 3M 5461 Quick Splice II is a 35 kv class inline splice
25 kv class fused loadbreak elbow connector
Loadbreak Connectors Catalog Data CA650070EN Supersedes 500-111 July 2012 COOPER POWER SERIES 25 kv class fused loadbreak elbow connector General Eaton combines a fully-shielded and insulated plug-in termination
UltraSIL polymer-insulated and porcelain loadbreak Type LB open distribution cutout
Fusing Equipment Catalog Data CA132035EN Supersedes November 2015 COOPER POWER SERIES UltraSIL polymer-insulated and porcelain loadbreak Type LB open distribution cutout Description Eaton has set a standard
Solid Dielectric, Single Phase Reclosers
Solid Dielectric, Single Phase Reclosers Providing electronic overcurrent protection for single phase operation on systems rated through 38kV, 800A continuous current,12.5ka symmetrical interrupting Reliable
SF 6 Gas Insulated Load Break Switch
Distribution Automation Solution SF 6 Gas Insulated Load Break Switch Pole-mounted type : PGS series (630A) DB-GS-M-630MC (Manual / Moldcon Busing Type) DB-GS-M-630TM (Manual / Terminal Busing Type) DB-GS-A-630MC
15kV 200A Loadbreak Fuse Elbow Design Test Report. Report Number:
15kV 200A Loadbreak Fuse Elbow Design Test Report Report Number: Date: RN-R2601 9/3/2015 Table of Contents 1. Partial Discharge Test Fuse Elbow... 2 2. AC Withstand Voltage Test - Fuse Elbow... 3 3. DC
Solid Dielectric, Triple Option Reclosers Catalog O-vlt14
Solid Dielectric, Triple Option Reclosers Providing electronic overcurrent protection for single or three phase operation on systems rated through 27kV, 630A or 800A continuous current, 12.5 or 16kA symmetrical
Solid Dielectric, Triple Option Reclosers Catalog O-vlt14
Solid Dielectric, Triple Option Reclosers Providing electronic overcurrent protection for single or three phase operation on systems rated through 27kV, 630A or 800A continuous current, 12.5 or 16kA symmetrical
Solid Dielectric, Triple Option Reclosers Catalog O-vst14
Solid Dielectric, Triple Option Reclosers Providing electronic overcurrent protection for single or three phase operation on systems rated through 38kV, 800A continuous current, 12.5kA symmetrical interrupting
Quick Splice II 5451R. 25/28 kv Molded Rubber Cable Repair Splicing Kit Data Sheet. 1. Product Description. 2. Applications
Quick Splice II 5451R (CN) Cable (JCN) Cable Accessory Splice Jacket 25/28 kv Molded Rubber Cable Repair Splicing Kit Data Sheet 1. Product Description The 3M 5451R Quick Splice II is a 25/28 kv class
PRODUCT CATALOGUE. Overhead System
PRODUCT CATALOGUE Overhead System Information Tel : 03-4777547 Fax : 03-4777570 E-mail : overseas@jaker.com.tw Web : www.jaker.com.tw Add : No.787, Xinwen Rd. Xinwu Dist., Taoyuan City 327, Taiwan Contents
16kA Solid Dielectric, Triple Option Reclosers Catalog VLT12
16kA Solid Dielectric, Triple Option Reclosers Providing electronic overcurrent protection for single or three phase operation on systems rated through 27kV, 630A continuous current, 16kA symmetrical interrupting
Solid Dielectric, Three Phase Reclosers Catalog O-vs18
Solid Dielectric, Three Phase Reclosers Providing electronic three phase overcurrent protection for systems rated through 38kV, 800A continuous current, 12.5kA symmetrical interrupting Reliable performance
M-Force three-phase switch
Switches and Disconnects CA008004EN Supersedes May 2015 COOPER POWER SERIES M-Force three-phase switch Description Eaton's Cooper Power series M-Force switch is a distribution-class, gang-operated, factory
CATALOG. Hi-Tech Fuse Products
CATALOG Hi-Tech Fuse Products Thomas & Betts is now ABB Installation Products, but our long legacy of quality products and innovation remains the same. From connectors that help wire buildings on Earth
PRODUCT BROCHURE. Elastimold ComboT integral separable connectors
PRODUCT BROCHURE Elastimold ComboT integral separable connectors 2 ELASTIMOLD COMBOT INTEGRAL SEPARABLE CONNECTORS One of the shortest stack heights in the industry works in smaller cabinets and installs
SUBSTATION VACUUM CIRCUIT BREAKER (38KV)
SUBSTATION VACUUM CIRCUIT BREAKER (38KV) For more than four decades, Myers Power Products has led the switchgear market in quality for the electric industry, delivering highly reliable products for utilities
SUBSTATION VACUUM CIRCUIT BREAKER (25.8 / 27KV)
SUBSTATION VACUUM CIRCUIT BREAKER (25.8 / 27KV) For more than four decades, Myers Power Products has led the switchgear market in quality for the electric industry, delivering highly reliable products
Bushings for High Voltage AC Applications
Bushings for High Voltage AC Applications Selection guide 1ZSE 2750-100 en, Rev. 3, 2006-03-15 During selection of for high voltage applications several important factors have to be considered to ensure
Transformer High Current Bushings Type CFPT & CFCT 36kV up to 40kA IEC
Transformer High Current Bushings Type CFPT & CFCT 36kV up to 40kA IEC 60137-2008 High current bushings for transformer Features Bushing Type CFPT version Porcelain Insulator Trench RIG technology for
1ZSC AAA EN, REV. 7. Transformer bushings type GSBK Technical guide
1ZSC563-AAA EN, REV. 7 Transformer bushings type GSBK Technical guide Original instruction The information provided in this document is intended to be general and does not cover all possible applications.
SUBSTATION VACUUM CIRCUIT BREAKER (15.5KV)
SUBSTATION VACUUM CIRCUIT BREAKER (15.5KV) For more than four decades, Myers Power Products has led the switchgear market in quality for the electric industry, delivering highly reliable products for utilities
Type HS PEXLIM-P Surge Arresters Maximum System Voltage 123 kv to 800 kv
Type HS PEXLIM-P Surge Arresters Maximum System Voltage 123 kv to 800 kv HS PEXLIM-P Metal Oxide Surge Arrester HS PEXLIM-P Surge Arresters are used for the protection of switchgear, transformers and other
1ZSC AAA en, Rev. 6. Resin impregnated paper bushing, oil to SF 6., type GSBK Technical guide
1ZSC563-AAA en, Rev. 6 Resin impregnated paper bushing, oil to SF 6, type GSBK Technical guide Original instruction The information provided in this document is intended to be general and does not cover
Solid Dielectric Load Break Switch SPECIFICATION. 25kV, 630A, 4 WAYS, 4 WAYS SWITCHED PADMOUNTED VACUUM LOAD INTERRUPTER
Solid Dielectric Load Break Switch SPECIFICATION 25kV, 630A, 4 WAYS, 4 WAYS SWITCHED PADMOUNTED VACUUM LOAD INTERRUPTER MANUALLY OPERATED / REMOTELY OPERATED DEAD FRONT PADMOUNTED VACUUM LOAD INTERRUPTING
solutions RUS accepted
Solid Dielectric, Triple Option Reclosers Providing electronic overcurrent protection for single or three phase operation on systems rated through 38kV, 800A continuous current, 12.5kA symmetrical interrupting
ACCESSORIES FOR LPOF, HPPT AND XLPE HIGH VOLTAGE CABLE SYSTEMS PRODUCT CATALOGUE
ACCESSORIES FOR LPOF, HPPT AND XLPE HIGH VOLTAGE CABLE SYSTEMS PRODUCT CATALOGUE hvgrid-tech designs and manufactures high voltage cable accessories for all types of cable systems, ranging from 69 kv to
15 kv Class Fused Loadbreak Elbow Connector with Interchangeable Fuse Capability
15 kv Class Fused Loadbreak Elbow Connector with Interchangeable Fuse Capability Application The Chardon 15 kv Class Fused Loadbreak Elbow Connector combines a fullyshielded and insulated loadbreak elbow
Minnesota Power Systems Conference Insulation Coordination Tutorial November 6, 2014
Minnesota Power Systems Conference Insulation Coordination Tutorial November 6, 2014 Presented By: Steve Brewer Senior Product Manager HPS Arrester Business Unit Traveling Wave Theory/ Overvoltage Protection
QTII (X) Series Silicone Rubber Cold Shrink Termination Kits
QTII (X) Series Silicone Rubber Cold Shrink Termination Kits For MV Armored/Non-Armored Cables up to 36kV DATA SHEET Update: August 2006 1. Product Description The 3M QTII (X) Series are Silicone Rubber
Figure 1. Two and Three-phase MagneX.
Fusing Equipment Two- & Three-Phase MagneX Interrupter Electrical Apparatus 240-33 GENERAL The Cooper Power Systems MagneX Interrupter is an overcurrent protective device that protects distribution transformers
SERIES G100 / G110 SPECIFICATION 15KV & 25KV SUBMERSIBLE & VAULT MOUNTED SF 6 -INSULATED VACUUM LOAD INTERRUPTING SWITCHES
SERIES G100 / G110 SPECIFICATION 15KV & 25KV SUBMERSIBLE & VAULT MOUNTED SF 6 -INSULATED VACUUM LOAD INTERRUPTING SWITCHES MANUALLY OPERATED / REMOTELY OPERATED DEAD FRONT SUBMERSIBLE AND VAULT MOUNTED
R-MAG Vacuum Circuit Breaker with Magnetic Actuator Mechanism 15.5 kv - 27 kv; 1200 A A
R-MAG Vacuum Circuit Breaker with Magnetic Actuator Mechanism 15.5 kv - 27 kv; 1200 A - 3700 A R-MAG The R-MAG is truly the next generation in vacuum circuit breakers, combining industry recognized magnetic
Padmount Solid Dielectric Switchgear Catalog
Padmount Solid Dielectric Switchgear Catalog p G&W headquarters in Bolingbrook, IL USA Company Profile Since 1905, G&W Electric has helped energize the world with innovative power system solutions. With
Surge arresters. UltraSIl Polymer-Housed VariSTar Type UI Intermediate-Class Surge arresters. General. COnSTrUCTIOn
Surge arresters UltraSIl Polymer-Housed VariSTar Type UI Intermediate-Class Surge arresters electrical apparatus 235-75 General Cooper Power Systems has set a new standard of excellence for polymerhoused
Low voltage bushings for pad-mounted distribution transformers Technical information guide
Transformer components Low voltage bushings for pad-mounted distribution transformers Technical information guide ABB low voltage bushings terminate a transformer s internal low voltage leads at the tank
1ZSE en, Rev. 7. Transformer bushings, type GOB Technical guide
1ZSE 2750-102 en, Rev. 7 Transformer bushings, type GOB Technical guide This Technical Guide has been produced to allow transformer manufacturers, and their designers and engineers, access to all the technical
Type ICX Outdoor open type cutout
Distribution cutouts Type IC Outdoor open type cutout Product features 7.8 kv, 15 kv, 15/27 kv, 27 kv, or 38 kv on 100 A 7.8 kv, 15 kv, and 15/27 kv only on 200 A 110, 125, 150, 170, or 180 kv BIL 180
JOSLYN. Underground Cable Accessories. Table of Contents. JPT/JIPT Polymer Terminations. ShrinkTite Sealing Kits. Easy-On II Terminations
Underground Cable Accessories JOSLYN Table of Contents JPT/JIPT Polymer Terminations 15kV, 25kV & 35kV ShrinkTite Sealing Kits 1kV In-Line Splice Sealing Kit Cable Jacket Sealing Kit Easy-On II Terminations
Surge Arresters. UltraSIL Housed VariSTAR Station Class Surge Arresters GENERAL CONSTRUCTION
Surge Arresters UltraSIL Housed VariSTAR Station Class Surge Arresters Electrical Apparatus 235-88 GENERAL Cooper Power Systems has set a new standard of excellence for polymerhoused station class surge
OHB Outdoor sulphur Hexafluoride circuit-breaker
1-2002 OHB Outdoor sulphur Hexafluoride circuit-breaker ABB T&D Divisione Sace T.M.S. -01.05.15 - Fields of application outdoor installations control and protection of distribution lines control and protection
43-SDMS-01 SPECIFICATIONS FOR
SPECIFICATIONS FOR MV SHUNT POWER CAPACITOR BANK UP TO 36 KV This specification is property of SEC and subject to change or modification without any notice CONTENTS Clause Description Page 1.0 SCOPE 3