BASE KIT. Tickle Machine Prank Hand Shake The Night Rider Flashlight Art Bot Doorbell Lil Breezy Three Wheeler. littlebits.
|
|
- Clyde Caldwell
- 5 years ago
- Views:
Transcription
1 BASE KIT Tickle Machine Prank Hand Shake The Night Rider Flashlight Art Bot Doorbell Lil Breezy Three Wheeler littlebits.cc/projects
2 base kit, deluxe kit How can electronics help spread laughs? TICKLE MACHINE power wire DC motor 2 Attach feathers to the motormate spin it Tickle your friends (and dust your bookshelf) turn me on a wire to extend and bend TIME: 15 mins feathers plus the motormate Try other materials too! 4
3 base kit, deluxe kit Want to trick a friend? We ll show you how! prank HANDSHAKE power wire button wire buzzer 2 Put the circuit on your hand and arm using rubber bands hide circuits under long sleeves turn me on stretch it TIME: 15 mins rubber bands How else can you surprise your friends using modules? Go ahead, shake a hand, surprise your friends! 5
4 base kit How can you create a light that only turns on at night? THE NIGHT rider 2 Rubber band battery power light cable in a loop sensor bargraph Cut a hole in the bottom of the cup 4 Hang it on your bike and RIDE ON! don t forget to connect your battery to the power module TIME: 0 mins on dark mode, adjust sensitivity Stay Safe! Always use with an adult. box cutter rubber bands plastic cup bike this is the beginning of your circuit (the power module) sharp! careful! and pull the cable loop through the hole Don t have a cup? What other materials can glow? stay safe! use additional lights at night 6
5 base kit illuminate your way with household materials. FLASHLIGHT power button wire bright LED 2 Put circuit in tube Turn it on and go EXPLorinG With Your FLAshLiGhT! turn me on TIME: 0 mins rubber bands bright and white tube plastic cup ensure that LED light faces out pro TiP: you can put a clear plastic cup in the end to diffuse the light. wrap with rubber bands battery inside tube We used a cup to diffuse the LED. What can you try? 7
6 base kit, deluxe kit How can you build a device to draw ArT BOT power DC motor use the motormate Rubber band together 2 battery cable and insert your charcoal or marker Put on the motormate What other tools can you draw with? 4 Put it on paper, turn it on and LEt it draw! don t forget to connect your battery to the power module TIME: 0 mins any kind of marking device is fine marker charcoal rubber bands LEGO TM axle Tuck battery under DC motor and attach with rubber band w he el Don t have an axle o r wheel? Make one! Attach LEGO TM axle and wheel 8
7 base kit deck out your bedroom door. DOOrBELL power wire button wire dimmer bargraph buzzer 2 Find a box and cut the bottom off 4 Make top piece cut rectangle to fit size of box sharp! be careful! cut hole to line up with button on base always connect your battery to the power module TIME: 60 mins box cutter Stay Safe! Always use with an adult. push pin marker tape scissors glue adjust the volume cardboard box these stay outside button sits on top of battery Place modules in box and tape down cut hole for 5 wire to go through box cut hole in box for power switch pro TiP: you can disconnect the connector to feed through small holes. Don t forget to reconnect it! Cut out decorative doorbell shape and glue to top piece glue 6 7 Glue one tab on top piece and attach to inside of box Place doorbell outside door and rest of modules inside room inside of room, use tape outside of room, use a push pin (like this) then close it up, and... 8 ding dong! adjust volume of alarm with the dimmer (bargraph as indicator) We d like to see your take on the doorbell project, upload it here! littlebits.cc/upload Customize it! Add paint, stickers... Go all out! 9
8 base kit Make your own spinning windmill. LIL BrEEzy power dimmer wire DC motor wire bright LED 2 Makea house out of craft sticks Put the modules in your house DC motor always connect your battery to the power module TIME: 90 mins hot glue Stay Safe! Always use with an adult. -or- glue scissors! pencil eraser craft sticks short? fat? tall? wide? you decide! Use scissors to cut craft sticks down to size make a shelf for the modules to sit on back view of the house 6 front of the house DC motor window light for night 4 Put a pencil eraser 5 on the DC motor this is a fun alternative to the motormate! Build a fan out of craft sticks and attach to the eraser with your glue enjoy your charming desk decor! 10
9 base kit learn how to make a light-controlled vehicle. THrEE wheeler power always connect your battery to the power module TIME: 90 mins wire box cutter choose whether to drive in light or dark Stay Safe! Always use with an adult. wood grill skewers light sensor tape pen See this tutorial with video extras at littlebits.cc/base wire use the motormate marker DC motor cardboard box What other objects can be a wheel? Try a CD! 2 Make wheels trace a cup on cardboard to get perfect circles sharp! be careful! cutout, color, and mark the center 4 in Makethe base out of cardboard cut a slot in the cardboard wide enough to fit the wheel 6 in Ours is 4in x 6in, what size will yours be? 4 Put modules on cardboard base 5 bottom use tape to hold modules down top Add wheel to motormate use pen to poke hole in wheel... motormate will go in here then add wheel to motormate in cardboard slot continued on next page 11
10 three wheeler continued from previous page 6 Poke skewer through two remaining 7 Attach back wheels 8 wheels and glue them in place, these will be the back two wheels Cut a rectangle of paper and fold in half then place over axle and tape down Draw yourself and cut the figure out 9 ride Through the night! Try the light sensor in both modes. Which is your favorite? this is an axle after you ve made the axle cut the points off the ends of the skewers (not too tight, axle should still spin) start where you think the end is 12
Stirling Engine. What to Learn: A Stirling engine shows us how energy is converted and used to do work for us. Materials
Stirling Engine Overview: The Stirling heat engine is very different from the engine in your car. When Robert Stirling invented the first Stirling engine in 1816, he thought it would be much more efficient
More informationRe-Energy.ca - Solar Electricity - Build Your Own Solar Car
Backgrounder Build Your Own Solar Car Back to Page 1 Build It! These step-by-step instructions provide you with a plan for making a basic solar car. If you can think of ways to improve the design of your
More informationThe Go Baby Go Build Manual
The Go Baby Go Build Manual The step-by-step guide to creating your own Go Baby Go Car 4488 Shockwave Robotics and Pacific University Index 1. List of Mat erials 2. Mechanical Assembly a. Installing the
More informationKre 8. Solar Powered Racer V4d
Solar Powered Racer V4d (OR Battery Powered Car) 1 Solar (sun powered) Racer OR battery powered racer This electric powered racer can be powered using direct sunlight (using the solar panel) * OR a battery
More informationDriving Science Home
Driving Science Home What makes a car go? The power of tension? The invisible force of magnets? The energy of fuel? Investigate how energy and the forces of motion get cars moving. Turn your house into
More informationBRING YOUR IDEA TO LIFE HOW TO CREATE YOUR OWN BATTERY POWERED MODEL RACING CAR
BRING YOUR IDEA TO LIFE HOW TO CREATE YOUR OWN BATTERY POWERED MODEL RACING CAR WHAT YOU WILL NEED TO MAKE YOUR MASTERPIECE... Here s a basic set of components and tools that you will need to bring your
More informationProject from
Project: Dog in car toy Page 1 of 15 Dog in car toy Toys on wheels are among the first types of toys that children start actively to play with. In their early age children love to push toys on wheels with
More informationM-Tuned reroute kit XX
M-Tuned reroute kit 14-161XX Manufactured and designed by: *Professional Installation Recommended but not required 1) Disconnect the negative terminal from the battery in the trunk. 2) Drain the coolant
More informationFront Bucket Seat Upholstery
Specter Off-Road, Inc. 21600 Nordhoff St. Chatsworth, CA 91311 USA www.sor.com, (818)882-1238, Fax: (818) 882-7144 sor@sor.com Luxury Seat Upholstery Installation Instructions Front Bucket Seat Upholstery
More informationElectricity. Grade: 1 st grade Category: Physical Science NGSS: ETS1.A: Defining and Delimiting Engineering Problems
Electricity Grade: 1 st grade Category: Physical Science NGSS: ETS1.A: Defining and Delimiting Engineering Problems Description: In this lesson, the students will learn that some objects need electricity
More information(905)
(905)953-9260 Marc@M-Tuned.com Coolant Reroute Kit *Professional Installation Recommended but not required 1) Disconnect Negative Terminal from Battery in trunk. 2) Drain Coolant from your cooling system.
More informationBuilding Robots with Lo-tech Materials
Building Robots with Lo-tech Materials 1 By Andrew Fisher When you think about robots, you probably imagine drones, self-driving cars, or humanoid robots like Atlas or Asimo. Many of these more serious
More informationM-TUNED COOLANT RE-ROUTE KIT
M-TUNED COOLANT RE-ROUTE KIT Part # MC-RR-216, MC-RR-218 Applications: 90-93 Miata 1.6L B6 94-97 Miata 1.8L BP More detailed instructions: http://www.etdracing.com/m-tuned/reroute.pdf 1) Disconnect Negative
More informationElectronic Circuits. How to Make a Paper Circuit
Electronic Circuits How to Make a Paper Circuit What is a Circuit? A circuit is a closed loop through which charges can continually move. Charges run from positive to negative. In this activity, a circuit
More informationMagnetic MTV Kit. User Guide. Components
Magnetic MTV Kit User Guide Components The Magnetic MTV Kit should contain the following items. If anything is missing, call Customer Service at 800-358-4983. Two 3" x 18" sheets of 1/4" balsa wood Mousetrap
More informationOverview: Note to Volunteers: Leap Bot Design Challenge 2
Leap Bot Design Challenge 2 Overview: In the Leap Bot Design Challenge, Brownies learn about engineering, gravity, and force by building and testing a Leap Bot. Brownies learn how to build and test a new
More informationKinetic Contraptions. Build a Hovercraft, Airboat, and More with a Hobby Motor. Curt Gabrielson
Kinetic Contraptions Build a Hovercraft, Airboat, and More with a Hobby Motor Curt Gabrielson Contents Acknowledgments ix Introduction 1 Getting Started 5 Safety 9 Basic Circuitry 11 Mounting the Motor
More informationLesson Plan: Electricity and Magnetism (~100 minutes)
Lesson Plan: Electricity and Magnetism (~100 minutes) Concepts 1. Electricity and magnetism are fundamentally related. 2. Just as electric charge produced an electric field, electric current produces a
More informationPeg-Harness installation instructions
Peg-Harness installation instructions I know it s not the easiest thing to do, but PLEASE READ THESE INSTRUCTIONS COMPLETELY so you will understand what you are trying to accomplish before you start drilling
More informationDIY Bi-Metallic Strip
DIY Bi-Metallic Strip An introduction to the applications of thermal expansion and two-way switching. Written By: Mahaaveer BN 2018 Page 1 of 14 INTRODUCTION A bi-metallic strip is used to convert a temperature
More informationINSTALL A DIMMER SWITCH
PROJECT 7 INSTALL A DIMMER SWITCH AH, DIMMER SWITCHES ONE OF OUR favorite little tricks to add ambiance to any room. Installing a dimmer switch allows you to adjust the degree of lighting in the room.
More informationCircuit Training. A Selection of Simple, Fun Electronic Projects using the Electricity Box provided with the Heather's Hut project
Circuit Training A Selection of Simple, Fun Electronic Projects using the Electricity Box provided with the Heather's Hut project Contents Introduction... 3 Notes...3 1. Steady Hand Game... 5 2. Light
More informationBeetleBot. The Simple Zippy Screw-Together Robot Kit! SKU: K JB. jb/
BeetleBot The Simple Zippy Screw-Together Robot Kit! www.solarbotics.com 1-866-276-2687 SKU: K JB http://www.solarbotics.com/products/k_ jb/ Document Revision: January 05 2016 Shell Board 2 x Sensor Wires
More informationThis meeting, Brownies learn about speed and friction before they design and build a race car. They
Race Car Design Challenge 1 Overview: In the Race Car Design Challenge, Brownies design cars and race tracks, then carry out fair tests to learn how design affects speed. Brownies learn how to design and
More informationInstalling LED lights in a Hypercharger By Keith Edwards Joker s Wild! (Wildjokr)
Installing LED lights in a Hypercharger By Keith Edwards Joker s Wild! (Wildjokr) THINGS YOU WILL NEED: A Hypercharger (duh!) LEDs (The ones I got were from Benny Bryant at Fantasies on Wheels in Sylacauga,
More informationBugatronics Kit Directions
Bugatronics Kit Directions The Bugatronics kit comes with everything you need to make a picture that teaches circuitry. The circuit pattern suggestion included in the kit is a parallel circuit but you
More informationroving on the moon Leader Notes for Grades 6 12 The Challenge Prepare ahead of time Introduce the challenge (5 minutes)
for Grades 6 12 roving on the moon Leader Notes The Challenge Build a rubber band-powered rover that can scramble across the room. In this challenge, kids follow the engineering design process to: (1)
More informationShed Light on Electric Generators: Do More Coils Generate More Electricity?
Shed Light on Electric Generators: Do More Coils Generate More Electricity? https://www.sciencebuddies.org/science-fair-projects/project-ideas/elec_p078/electricity-electronics/electric-generatorsdo-more-coils-generate-more-electricity
More informationESPA3D Photo Essay One page ESPA3D Plans are HERE Back to Spad Plans Index
1 of 8 8/29/2012 12:28 PM ESPA3D Photo Essay One page ESPA3D Plans are HERE Back to Spad Plans Index This little airplane has turned out to be one of the most fun Spad projects we've ever done! It is built
More informationGrilleGuy.com, LLC. Installation Instructions and Care Guide : Toyota Tacoma Grille UPPER GRILLE
Installation Instructions and Care Guide : 2001 2004 Toyota Tacoma Grille Thanks again for purchasing your custom grille insert from GrilleGuy.com. The following are some general guidelines that will simplify
More informationPractice Challenges. These challenge cards are provided so that teams can practice and prepare for the EPro8 Challenge.
Practice Challenges These challenge cards are provided so that teams can practice and prepare for the EPro8 Challenge. During the EPro8 Challenge teams will be based at a workstation containing gears,
More informationPOW WOW Rocket Fun
POW WOW 2004 - Rocket Fun Class Outline I. Introduction (5') - Distribute Handouts - Sign-in Sheet - Brief history of Rockets Date: January 24, 2004 Course Session: Sessions 1, 4 II. Rocket Principles
More information1. General information. Version 2.0 Assembly Instructions General Safety Information. Assembly.
. General information General Safety Information Version.0 Assembly Instructions support@cruzbike.com WARNING to avoid serious injuries:. If you are unsure about fitting, testing and adjusting brakes or
More informationIn the Board Game Design Challenge, Daisies create board games and learn that people who invent new things are called inventors.
Board Game Design Challenge 2 Overview: In the Board Game Design Challenge, Daisies create board games and learn that people who invent new things are called inventors. Step One: Come up with an idea for
More information1. General Safety Information. Silvio V2.0 Assembly Instructions. Assembly. Adjust to the rider.
Silvio V.0 Assembly Instructions support@cruzbike.com. General Safety Information WARNING to avoid serious injuries:. If you are unsure about fitting, testing and adjusting brakes or gearing on a bicycle,
More informationWorking Stirling-Motor
PARTS LIST 113.174 Working Stirling-Motor Please Note The OPITEC range of projects is not intended as play toys for young children.they are teaching aids for young people learning the skills of Craft,
More informationTHE GHOST TRAIN. - Assembly Instructions Page 1.
- Assembly Instructions Page 1. - Assembly Instructions Page 2. - Assembly Instructions Page 3. WHAT YOU'LL NEED: Scissors, Elmer's glue (or a glue stick), a ruler or other straight-edge, 11 toothpicks
More informationVehicle Specific Instruction Notes
Vehicle Specific Instruction Notes Most later model vehicles use a plastic and felt anchoring strip in place of the older metal rods. We have provided rod pouches on all of our new seat skins that will
More information1) Remove side panels. Remove clutch cover. Remove windshield by pulling up on the three posts secured into
UNDER HOOD HEAT ELIMINATOR A.K.A. THE BLOW HOLE by Mountain Tek Application 2013 Model Year SKIDOO XM Kit Contents 1) (1) Fan Tube Assembly 2) (1) Accessory Connect Harness 3) (1) Fan Vent Cover Plate
More informationGrilleGuy.com, LLC. Installation Instructions and Care guide : Scion tc : Honda S2000 : Honda Civic
Installation Instructions and Care guide : 2005 2009 Scion tc : 2000 2003 Honda S2000 : 2004 2005 Honda Civic Thanks again for purchasing your custom grille insert from the GrilleGuy. The following are
More informationEngaging Inquiry-Based Activities Grades 3-6
ELECTRICITY AND CIRCUITS Engaging Inquiry-Based Activities Grades 3-6 Janette Smith 2016 Janette Smith 2016 1 What s Inside Activity 1: Light it Up!: Students investigate different ways to light a light
More informationOGALE S ELECTRICITY KIT Learn with Fun!
OGALE S ELECTRICITY KIT Learn with Fun! Dear students, Congratulations on getting this electricity kit!! With this box you will be making: Simple circuits with Motor, Siren, LEDs, fan, switches buzzer,
More informationUltra-Thin Recessed LED Light Installation Guide
TM PROFESSIONAL GRADE LED LIGHTING www.aspectled.com Copyright 2012-2016. aspectled, Inc. 1 OVERVIEW aspectled s Ultra-Thin series of recessed lights are bright, energy efficient, attractively styled,
More informationInstallation Instructions:
Installation Instructions: Type of Operation: Motor Type of Mount: Outside All directions are provided assuming the installer is looking at the door from the coil side of the opening. (see drawing below)
More informationInstall: Part A. First things first: Running the wiring for the Neo-Pod
Install: Part A First things first: Running the wiring for the Neo-Pod These instructions follow installation of #31649KL Neo-Pod (the fully loaded version with amp, sub, etc.) in a factory Wrangler sound
More informationMGB V8 Roadster restoration project Report 67
19th August 2016. This report jumps a bit from one subject to another. If I need to put some thought into a certain aspect of the rebuild I tend to get on with another job and sleep on the problem until
More informationMustang Radiator Conversion DIY. By GearHeadPeter. January 27, 2011
1964-1966 Mustang Radiator Conversion DIY By GearHeadPeter January 27, 2011 We all know that the radiators in our cars are not the best, especially if you have done any customization to the engine, which
More informationPerfect Park 7000 Installation & Unloading Instructions Operating Manual
Perfect Park 7000 Installation & Unloading Instructions Operating Manual 1) Always file a claim with the truck line if the lift has been damaged! (If you don t originally notice the damage, but find some
More informationHAVE FUN WITH THE TRYBIKE!
USER INSTRUCTIONS HAVE FUN WITH THE! Thank you for buying an original Trybike! We wish your child lots of fun and adventure with the new bike. The Trybike can be used by children from around two years
More informationSidney Sizes his Solar Power System
Sidney Sizes his Solar Power System Sidney wants to size his van s solar power system. He s got a few things he d like to power in his van, and those items are where the design will begin. Step 1: Sidney
More informationCLASSROOM STORAGE CATALOG
CLASSROOM STORAGE CATALOG 207 INTERLOCKING BINS Large book bins hold books, magazines, files, folders, etc Available in bright colors Sides of bins connect together for safe storage Made of sturdy and
More informationDesign Activity: Making a Mechanical Arm
environment. Since gases readily expand, minor leaks in a pneumatic system do not significantly affect the system s performance. Hydraulic systems are generally more precise due to liquid incompressibility
More informationRS-2 SINGLE ACTION REAR BUMPER WITH TIRE CARRIER INSTALL MANUAL FOR JEEP WRANGLER ALL MODELS.
RS-2 SINGLE ACTION REAR BUMPER WITH TIRE CARRIER INSTALL MANUAL FOR 2007-2016 JEEP WRANGLER ALL MODELS. Rear Bumper Installation Instructions 1) Remove factory rear bumper, (this includes all tow hitch
More informationI want to try my hand here at doing a TacoBill write up so here it goes.
Here is part 3 of my tutorial for the conversion of my Shaker 1000 to the Kenwood DNX7100 Navigation / Head Unit. With the 7100, my new system will include the Kenwood I-pod Adapter (P.I.E. KNW/USB-AV),
More informationreflect energy: the ability to do work
reflect Have you ever thought about how much we depend on electricity? Electricity is a form of energy that runs computers, appliances, and radios. Electricity lights our homes, schools, and office buildings.
More informationLesson Plan 11 Electric Experiments
Lesson Plan 11 Electric Experiments Brief description Students experiment with aluminium foil, batteries and cheap, readily availably low voltage light bulbs* to construct a simple conductivity tester.
More informationI N V E N T O R S M A N U A L
INVENTOR S MANUAL INTRODUCTION ELECTRIC CITY KIT Welcome to the hi-tech world of Logiblocs! These instructions will tell you all you need to know to make a Door Alarm, Security Mat, Water Bleeper, Light
More informationTeacher s Guide: Safest Generation Ad Activity
Teacher s Guide: Safest Generation Ad Activity Introduction Today s 11- and 12-year-old preteens are very smart about vehicle safety. They have grown up using car seats and booster seats more consistently
More informationMusselman Scout Shop Newsletter January 2013 Edition
The staff at the Musselman Scout Shop would like to wish you and your family a Happy New Year! Thank you so much for shopping with us and we hope to assist you in all your Scouting needs in the coming
More informationLearning to Set-Up Your Warrior Drive Belt Arizona Warrior (Rev4) BEFORE GETTING STARTED
BEFORE GETTING STARTED 1. A noise one guy calls 'howling' is the same noise another guy calls 'squealing' so unless you are both hearing the noise with your own ears its better to not assume a drive belt
More informationCable Car. Category: Physics: Balance & Center of Mass, Electricity and Magnetism, Force and Motion. Type: Make & Take.
Cable Car Category: Physics: Balance & Center of Mass, Electricity and Magnetism, Force and Motion Type: Make & Take Rough Parts List: 1 Paperclip, large 2 Paperclips, small 1 Wood stick, 1 x 2 x 6 4 Electrical
More informationCub Scout Den Meeting Outline
Cub Scout Den Meeting Outline Month: July Week: 1 Point of the Scout Law: Loyal Before the Meeting Gathering Opening Games Activity Business items/take home Closing After the meeting Tiger Wolf Bear Webelos
More informationTusk Pannier Racks. Instructions and information KLR
1 Tusk Pannier Racks Instructions and information KLR650 2008 + Congratulations on your purchase of the Tusk Pannier Racks. These racks are made to handle extreme adventure riding, but work great for the
More informationINSTALLATION GUIDES OUTDOOR LIVING
S OUTDOOR LIVING TABLE OF CONTENTS 12 Volt 12 Watt DC Transformer Page 2 12 Volt 50 Watt DC Smart Transformer Page 3 12 Volt 50 Watt Smart Transformer Control Page 4-5 Waterproof Dimmer For 12W Transformer
More informationThese instructions show how to build the Remote Controlled Fart machine Sound Kit.
Remote Controlled Fart Machine Assembly Instructions These instructions show how to build the Remote Controlled Fart machine Sound Kit. Tools Required Drill with 7/64, 3/16, and ¼ drill bits. Holt melt
More informationRostra Electronic Cruise Control Install On a Stratoliner or Roadliner
Rostra Electronic Cruise Control Install On a Stratoliner or Roadliner MATERIALS LIST: 1 - Rostra Part # 250-1223 (www.brandondist.com/products/cruise1223.htm) 1 - Signal Splitter part # 250-4369 1 - Engagement
More informationMLGW 2018 A-BLAZING MODEL SOLAR CAR RACE RULES AND VEHICLE SPECIFICATIONS
MLGW 2018 A-BLAZING MODEL SOLAR CAR RACE RULES AND VEHICLE SPECIFICATIONS The object of the MLGW A-BLAZING MODEL SOLAR CAR RACE is to design and build a vehicle that will complete a race in the shortest
More informationCORKSPORT Power Series Cat Back Exhaust I N S T A L L A T I O N I N S T R U C T I O N S Mazda 6 2.5T PART #: ATK
I N S T A L L A T I O N I N S T R U C T I O N S CORKSPORT Power Series Cat Back Exhaust 2018+ Mazda 6 2.5T PART #: ATK-6-101-12 Need Help With Your Installation? Call (360) 260-CORK PAGE 1 CORKSPORT Power
More informationChapter 12. Formula EV3: a racing robot
Chapter 12. Formula EV3: a racing robot Now that you ve learned how to program the EV3 to control motors and sensors, you can begin making more sophisticated robots, such as autonomous vehicles, robotic
More informationTip: Water Crane with Servo Motor, LED Lantern, Moving Man Date: Update includes video
Hi All, I ve had the Faller Swivel Water Spouts kit 120137 (B137 = old number) since 2000, which I will refer to as a Water Crane. I assembled the kit at the time with the intent of animating it with a
More informationriderite.com INSTALLATION INSTRUCTIONS
2528 INSTALLATION INSTRUCTIONS 4-16 ! IMPORTANT PLEASE DON T HURT YOURSELF, YOUR KIT OR YOUR VEHICLE. TAKE A MINUTE TO READ THIS IMPORTANT INFORMATION. This kit is to be used on a pickup truck only, and
More informationPower Move: Manipulating Magnets to Improve Generator Output
Power Move: Manipulating Magnets to Improve Generator Output https://www.sciencebuddies.org/science-fair-projects/project-ideas/elec_p079/electricity-electronics/manipulatingmagnets-to-improve-generator-output
More informationGXS14 - Civic Natural Gas Fuel Tank Solenoid Valve Replacement
Objective Remove In-Tank Solenoid Valve Inspect Fuel Tank for Liquid Contamination Evaluate Replacement Valve Condition Install In-Tank Solenoid Valve and Leak Check Align New Solenoid Valve and Connect
More informationPretium Wall-Mountable Housing (PWH-02P/-04P/- 06P/-12P and FZB-02P-JB)
1. Precautions 2. Carton Contents Pretium Wall-Mountable Housing OR Fiber Zone Box (FZB-02P-JB) PWH-02P and FZB-02B-JP have: (15 inches) edge grommet (1) Laser warning label (2) Fiber identification labels
More informationInstallation Instructions:
Installation Instructions: Type of Operation: Motor Type of Mount: Inside All directions are provided assuming the installer is looking at the door from the coil side of the opening. (see drawing below)
More informationContents. Preparing the motor Winding the rotating secondary Winding the primary... 8
120732-130389 Propeller Clock Construction Notes Revision E, December 2, 2013 Contents Preparing the motor... 2 Winding the rotating secondary... 5 Winding the primary... 8 UltiProp Clock (Elektor Dec.
More informationPrusa i3 Printer Assembly Guide
Prusa i3 Printer Assembly Guide Special thanks to Carlos Sanchez and Miguel Sanchez for the graphics. All graphics captured from their great animation: http://www.carlos-sanchez.com/ Prusa3/ For copyright
More informationTip: 3652 and 3756 Crocodiles with LP4.0 and LED Lighting Date:
Hi All, My friend Adrian asked me to convert two crocodiles 3652 and 3756 using LokPilot 4.0 decoders. Adrian wanted to run both locomotives as a double headed configuration so this would require that
More informationReplacing Your 2nd Generation Battery Pack
Replacing Your 2nd Generation Battery Pack Video tutorial: https://www.youtube.com/watch?v=xvcfwpo8rok Tools needed: 4mm hex tool. If you do not have a hex wrench, please email us at recall@boostedboards.com
More informationPhysical Sciences (Energy and Matter) Objective: To determine what household items are good conductors of electricity. The purpose of this
Objective: To determine what household items are good conductors of electricity. The purpose of this investigation is to demonstrate an understanding of simple closed circuits as well as evaluate the electrical
More informationVW & Audi TDI CR140 ECO KIT Installation Guide
VW & Audi TDI CR140 ECO KIT Installation Guide This guide is to help you install your new Rawtek DPF, EGR & Adblue Delete Exhaust ECO Kit on your (2009-2014) VW / Audi with 2.0l CR140 Diesel Engine. Note:
More information*CROSSBAR SPREAD Your crossbar spread is the distance between the crossbars. This hidden switch enables safe mounting outside the towers.
VIPER (1x) Type of Rack Load Crossbar Spread* Limits WHEELSTRAP (1x) carriage bolt (1x) snap around (1x) Round Bar & Square Bar 1 or 2 bikes 3 or more bikes 16" - 42" 41cm - 107cm 18" - 42" 46cm - 107cm
More informationThis document provides instructions for removing and installing a rear shock absorber on a Ducati Superbike with a single-sided swingarm. The torque values used are for the 748/916/996 from 1994 to 2001
More informationInstallation Instructions. Door Pockets Porsche
Installation Instructions Door Pockets Porsche 911 69-73 Before you begin The installation of your door pockets in itself is relatively straight forward. However to get a perfect fit some (time-consuming)
More informationLETTER TO PARENTS SCIENCE NEWS. Dear Parents,
LETTER TO PARENTS Cut here and paste onto school letterhead before making copies. Dear Parents, SCIENCE NEWS Our class is beginning a new science unit using the FOSS Magnetism and Electricity Module. We
More informationCALDERA 10E Spur Gear Change
CALDERA 10E Spur Gear Change www.thirdcoastrc.com ebay handle - little*oak Click Below to Visit our Ebay Store EBAY STORE (Please take a moment and bookmark my website, ebay store, and save me as an ebay
More informationTip: LED Lighting for the 4367 SBB Euro City Set, 4366 and 4368 Cars Date: , Corrections Modified , Photos
Hi All, I have had the 4367 SBB Euro City set with extra cars 4366 and 4368 since 1998, apart from a test run on the layout they have stayed in storage ever since. I decided to change some rolling stock
More informationReplacing MK4 Golf/Jetta radiator mounts in-car
Replacing MK4 Golf/Jetta radiator mounts in-car This is a guide to replacing the radiator mounts in a MK4 Golf/Jetta. This involves moving the core support to the service position which allows you to do
More informationOracle Halo Headlight Conversion Kit - White (10-12 All)
Oracle Halo Headlight Conversion Kit - White (10-12 All) Tools needed: Small flathead screwdriver Large flathead screwdriver Ratchet 7 mm, 8mm, and 10mm socket Oven Heat Gun 2 2x4 12 long (other will work,
More informationSetting The Sag. We ve gathered up a few tutorials on setting the sag. Read them over and decide which one makes the most sense to you.
Setting The Sag Setting the sag on your bike is the first step in correctly adjusting your suspension. We here at MotorPsycle.com want you to have a safe, great-handling bike. A suspension set up too hard
More informationRecreational Kick Scooters, Warnings, Specifications & Instructions
MODEL NUMBER ASSEMBLY NUMBER RAILZ SCOOTER MODELS COVERED BY THESE INSTRUCTIONS UPC 18-001 100-00018-001 793573890191 18-004 100-00018-004 040232562433 20-001 100-00020-001 793573234520 20-004 100-00020-004
More informationLESSON 31: A. Home Appliances - Can you take me to that shop?
LESSON 31:. Home ppliances - an you take me to that shop? Microwave Oven Television Vacuum leaner Refrigerator 1. It s an electric tool used for cleaning. 2. It s an electric appliance used to keep food,
More informationInstallation Instructions: Epson 1400 CFS
Installation Instructions: Epson 1400 CFS Epson 1400 with MIS CFS Installed *A perfect print with OEM cartridges is a must* Prerequisite - Before starting this installation, you MUST test your printer
More informationINSTALLATION INSTRUCTIONS FUEL SURGE TANK KIT
INSTALLATION INSTRUCTIONS FUEL SURGE TANK KIT BMW E46 3-Series, Excl Convertible Document: 19-0056 Support: info@radiumauto.com Relieve fuel pressure in vehicle before beginingthe installation. Disconnect
More information12 Electricity and Circuits
12 Electricity and Circuits We use electricity for many purposes to make our tasks easier. For example, we use electricity to operate pumps that lift water from wells or from ground level to the roof top
More informationIn the November 2006 issue of FireRescue, ( Easy
PHOTO GLEN ELLMAN Figure 1: Ensuring your ground ladders are stored correctly, free of vibration and exposure to the elements, is key in ensuring they re safe to use on the fireground. In the November
More informationInstallation Instructions COMPETITION/PLUS SHIFTER Ford Mustang MT82 6-Speed Manual Transmission Catalog#
Installation Instructions COMPETITION/PLUS SHIFTER 2015-2017 Ford Mustang MT82 6-Speed Manual Transmission Catalog# 3916037 Rev. 00 WORK SAFELY! For maximum safety, perform this installation on a clean,
More informationThermo-Bob 3 Installation Manual: KLR650E (2008 and newer)
Thermo-Bob 3 Installation Manual: KLR650E (2008 and newer) Thank you for purchasing the Thermo-Bob 3 radiator bypass system for the KLR650. Since the KLR already has a doohickey, it seemed that this thingamabob
More informationTriumph Street Triple VSM Grip Heater Install
Triumph Street Triple VSM Grip Heater Install Introduction: With winter fast approaching and with painful memories of last winter riding with the club it was time to do something about getting some grip
More informationHow I installed new brake pads on my i with Sport Package (should be fine for other E39 s) By Robert B.
How I installed new brake pads on my 1999 528i with Sport Package (should be fine for other E39 s) How I installed new brake pads on my 1999 528i with Sport Package (should be fine for other E39 s) By
More information