Front Bucket Seat Upholstery
|
|
- Norah Mosley
- 6 years ago
- Views:
Transcription
1 Specter Off-Road, Inc Nordhoff St. Chatsworth, CA USA (818) , Fax: (818) Luxury Seat Upholstery Installation Instructions Front Bucket Seat Upholstery Series Land Cruiser and Lexus LX450 SOR Parts: # GRY & # OAK Replaces front seat upholstery on 80 Series Land Cruiser and Lexus LX450 with factory leather electric seats. For cloth seats, see SOR part # A. Specter Off-Road Seat Covers are designed and sewn on our premises. They are made to industry specifications, designed to be installed by upholstery professionals and will exhibit factory original fit. With a little forethought the average home mechanic will successfully achieve that same original fit. Proper fit requires the purchase of new seat foams. Replacement foam can be purchased from Specter Off-Road. Headrest, console and door armrest covers are optional accessories sold separately. See page 2 of these instructions for part numbers, or visit the 80 Series Luxury Seat Upholstery page at for pricing and to purchase.
2 Parts List 2 bottom seat covers 2 back rest cover Retainer wires Hog rings Tools Required Compound Wire Cutters or Dykes 12, 14 & 17 mm Socket Wrenches Phillips & Bladed Screwdrivers Hog Ring Pliers Adjustable Pliers Scissors Utility Knife Awl Plastic Trash Bags (large enough to cover each piece of foam, color doesn t matter) Additional Part Numbers Rear Seat Upholstery # GRY REAR GREY LUXURY SEAT COVER SET 2 bottom bench seat cover, 2 back bench seat cover, and 2 folding arm rest covers. # OAK REAR OAK LUXURY SEAT COVER SET 2 bottom bench seat cover, 2 back bench seat cover, and 2 folding arm rest covers. Front Seat Cushion Foam (FOR VEHICLES WITH ELECTRIC LEATHER SEATS) # LH SOR BOTTOM SEAT FOAM Fits FJ80 & LX450 Drivers Side Front Seat Foam Using SOR Luxury Upholstery. Headrest, Console & Door Armrest Covers # RH SOR BOTTOM SEAT FOAM Fits FJ80 & LX450 Passenger Side Front Seat Foam Using SOR Luxury Upholstery. # GRY FRONT GREY HEADRESTS COVERS sold in a pair The following part numbers are unique to either the Land Cruiser 80 series or Lexus LX450. Choose your rear headrest cover part numbers according to vehicle make and model. # OAK FRONT OAK HEADREST COVERS sold in a pair # GRY REAR FJ80 GREY HEADREST COVERS FJ80 ONLY with leather interior. Sold in a pair. # GRY # OAK # GRY # OAK FJ80 GREY CONSOLE COVER FJ80 OAK CONSOLE COVER GREY DOOR ARMREST COVERS - fit front or rear door armrests. Sold in a pair. OAK DOOR ARMREST COVERS - fit front or rear door armrests. Sold in a pair. # OAK # GRY # OAK REAR FJ80 OAK HEADREST COVERS FJ80 ONLY with leather interior. Sold in a pair. REAR LX450 GREY HEADREST COVERS LEXUS LX450 ONLY with leather interior. Sold in a pair. REAR LX450 OAK HEADREST COVERS LEXUS LX450 ONLY with leather interior. Sold in a pair. Page 2
3 Preparation & Installation Tips 1. READ THESE INSTRUCTIONS IN THEIR ENTIRETY BEFORE YOU PROCEED. 2. Before removing the seats from the vehicle, confirm that the seats are lowered to their lowest position. They will need to be in their lowest position to access the bolts that attach the seat cushion sub frame to the motorized seat frame assembly. 3. Check for damaged or missing hardware, knobs and switches. Order replacement parts as needed. See page 118 of the SOR catalog. 4. Compare the retainer wires to the seams and loops to determine their position. Do not install them at this time. 5. It is not advisable to install this kit in temperatures under 75 degrees Fahrenheit. Lay the covers in the sun to warm them. 6. Work in a clean environment. Keep your work surface clear of debris such as cut hog rings. Use an old blanket or towel on your work surface to prevent damage to your new seat covers during the installation process. Avoid transferring grease from mechanical seat parts to the covers by way of your hands by covering those parts with cloth or plastic sheets. Keeping your hands clean will help to keep your new covers clean. Part I Front Seat Disassembly 1. Unplug the connector, then unbolt the seats and remove them from your vehicle. 2. Remove the plastic covers on each side of the seat located at the hinge point. Each cover has 3 small Phillips head screws holding it together (see figure 1-2). 3. Remove the seat adjustment switch knobs and cover plate. Gently work a bladed screw driver behind each knob and pry them free. Cover the blade of the screwdriver with tape to prevent marring the surface. Pry off the cover plate (see figure 1-3). 4. Remove the side bolster adjustment knob (see figure 1-4 & 1-4B). 5. Remove the seat back cover panel. Remove the two small screws located at the bottom of the panel (see figure 1-5). Slide the panel down. You may need to reach behind the panel and unclip it from the seat. Figure 1-2 Figure 1-3 Figure 1-4 Figure 1-4B 6. Separate both seat wire harness plugs from the seat frame by pulling them forward towards the front of the seat off their perch. Disconnect the remaining plug (see figure 1-6). 7. Separate the cushion and sub frame from the seat frame assembly. Remove the four 12mm bolts holding the sub frame in place. Two are located in front on the bottom and two are located on the side under the hinge plate and accessed through holes in the plate (see figure 1-7 & 1-7B). You will need to disconnect the seat belt switch plug to access the one on the seat belt side of the seat. Figure 1-5 Figure 1-6 Figure 1-7 Figure 1-7B Page 3
4 Figure 2-1 Figure 2-1C Figure 2-3 Figure 2-4 Figure 2-5 Figure 2-1B Figure 2-4B Figure 2-5B Part II Front Seat Cushion Cover Installation 1. Remove the existing seat cover. Clip the old hog rings from the bottom of the seat frame (see figure 2-1). Pry the metal tab free (see figure 2-1B) and unfold the plastic edges. Make relief cuts in if needed. Clip the hog rings free from their mounting points from the top side of the seat (see figure 2-1C). 2. Remove the old seat cushion. 3. Place the new cushion into a trash bag so a single layer of plastic covers the cushion (see figure 2-3). Place the new cushion into the steel sub frame. Tuck the edges between the foam and seat frame. The plastic sheet will work as a slip sheet and aid in reducing friction between the inside surface of the cover and the seat foam. 4. Turn the cover inside out. Insert a retainer wires through the loops in the center of the bottom side of the cover (figure 2-4). The wire should extend through the loop leaving excess evenly on both ends. Cut slits in the slip sheet mentioned in the previous step to allow the loop and retainer wire to easily pass through (figure 2-4B). 5. Position the seat cover over the cushion and frame making sure it is properly oriented front to back. The loop and wire installed in the previous step should align with the slots in the cushion. The opening for the seat controls should align with the switch panel. Push the loops and wires through the slit in the slip sheet into the slots in the seat cushion (see figures 2-5 and 2-5B). You will need to access them from the bottom of the seat. 6. Starting at the front of the cushion, roll the cover over the cushion turning it right side out over the cushion. Make sure to keep the seams aligned with the edges of the cushion. 7. Place the seat top side down on a soft surface to prevent damage to the new cover. From the bottom side of the seat, pull the cover tight by pushing down on the frame while pulling up on the edges of the cover. Pull the wire reinforced loops completely through (see figure 2-7). Recheck the seat cover alignment. Recheck the position of the opening for the seat control switch panel. Figure 2-7 Page 4
5 8. Fold the heavy plastic edging of the seat cover back under the frame (figure 2-8). Bend the retainer tabs over to hold them in place. Double check fit and alignment. 9. Connect the cover and cushion to the frame assembly. Begin with three wire loops you passed through the cushion in step 5. Clamp hog rings around the retainer wires and vinyl to a convenient point on the steel S shaped springs (see figure 2-9). Be sure to check fit and alignment smoothing wrinkles as you work the cover into position. 10. Connect the flaps located at the center of the each side of the seat. Pull each flap around to the bottom of the seat and attach it with one hog ring to hold it in position (see figure 2-10). Don t overs stretch the flap. Note these are the only hog ringed pieces of vinyl that do not have wire re-enforcement. Make sure the flaps hide the foam and frame by test fitting the pieces on either side of them. 11. Locate the seat frame mounting holes near the back of the frame. Make a reference mark on the foam using a dark marker (Sharpie). You will be covering these holes. Having a reference mark will aid in locating them later. Make sure the mark is outside the edge of the vinyl once it is pulled into position (see figure 2-11). 12. Insert retainer wire into the outer seams of the cover. Clamp hog rings around the retainer wire through the vinyl to the steel S shaped springs (see figure 2-12). Part III Front Seat Backrest Cover Installation 1. Remove the existing cover from the backrest. As you did with the seat cushion, clip the seams with scissors and cut the old hog rings free with the wire cutters (see figure 3-1). Exercise caution to avoid damaging the backrest foam. Figure 2-8 Figure 2-10 Figure 2-11 Figure 2-12 Figure From behind the seat, reach into the cavity at the top and feel for the base of the headrest guide (see figure 3-2). Pinch the two prongs together (see figure 3-2B) and push the guide out through the top of the seat while pulling with the other hand (see figure 3-2C). Figure 3-1 Figure 3-2 Figure 3-2B Figure 3-2C Page 5
6 3. Pull a small kitchen trash bag over the backrest (see figure 3-3). You may need to temporarily tape it in place. The bag will aid in reducing friction between the inside surface of the vinyl and the foam. Figure 3-3 Figure 3-4 Figure 3-5 Figure 3-5B Figure 3-5C 4. There are two sets of loops; two horizontal and two vertical loops located in the middle of the inside surface of the seat cover. As you did with the seat cushion, insert retainer wires through the loops. The wire should extend all the way through the loops. The loops should align with the slots in the backrest foam (see figure 3-4). 5. Pull the cover over the backrest into position. While the top of the cover remains in position, pull the bottom inside out back to the top to reveal the anchor loops. Beginning with the upper horizontal loop, use hog rings to connect the cover to the embedded steel rod in the backrest (see figure 3-5). Repeat the process for the other horizontal connection (see figure 3-5B) then connect the two side loops. Carefully pull the cover free of the side of the backrest to access the side connecting points (see figure 3-5C). 6. Pull the cover back into position (see figure 3-6). Tuck the bottom seam under the backrest and through to the back. From the back of the seat, pull the cover tight to check fit and alignment (see figure 3-6B). 7. Thread retainer wires through the seams that surround the opening in the back of the seat. Pull the seat cover tight and connect the upper wire reenforced seam to the horizontal rod at the top of the opening (see figure 3-7). Check fit and alignment. Next, do the sides, pulling them tight and attaching them to the corresponding steel rods. Last, do the bottom seam pulling it into position and connecting it using hog rings (see figure 3-7B). Figure 3-6 Figure 3-6B Figure 3-7 Figure 3-7B Page 6
7 Part IV Reassemble the Front Seat 1. Begin with the seat back panel. Slide the panel up into position and replace the screws at the bottom (figure 4-1). 2. Snap the control panel backing plate into position and replace the switch knobs. 3. Replace the side bolster adjustment knob. Feel for the splined post on the side of the seat. Cut a small hole, just large enough for the knob post to pass though. No larger than 3/4 inch diameter (2 Centimeters) (figure 4-3). The hole needs to be large enough that the knob doesn t bind when it being turned. It s very important not to cut the hole too large. 4. Install the seat cushion. You will need to cut the vinyl clear of the rear bolt holes. Locate the bolt hole in the sides of the frame. Use the reference marks you made in Part II step 11 and feel for the hole through vinyl. Once located, poke a pin or Awl through the center for confirmation. Use sharp blade to cut a circle out around the hole (see figure 4-4). Use the bold shaft as your reference and cut away enough to let the bolt pass through (see figure 4-4B). It s very important not to cut the hole too large. Bolt the cushion back into position. 5. Reconnect the seat belt switch plug. 6. Reconnect the seat harness plug and slide it back onto its perch. Slide the connector to the main harness back onto its perch. 7. Reinstall the headrest guides. Start by locating and marking the headrest guide holes in the top of the seat back. Feel for the ring of the top of the guide tube with your finger (figure 4-7) and use a ball point pen to mark a small X across the center. 8. Hold the stem of the guide up to the mark to get an idea of how long to make the cuts. Be careful not to over cut the vinyl, it s better to undercut and adjust it if needed. Cut the X with a sharp utility knife or scissors (figure 4-8). You may need to cut away the excess fabric from around the hole. 9. The guide with catch button is put in the hole near the door of vehicle and the button faces the outside of the vehicle. Push the guide through the hole until it snaps into place (figure 4-9). 10. Reinstall the seats. Figure 4-1 Figure 4-3 Figure 4-4 Figure 4-7 Figure 4-8 Figure 4-4B Figure 4-9 Page 7
8 # _090710
Vehicle Specific Instruction Notes
Vehicle Specific Instruction Notes Most later model vehicles use a plastic and felt anchoring strip in place of the older metal rods. We have provided rod pouches on all of our new seat skins that will
More informationInstallation Manual TWM Performance Short Shifter Cobalt SS/SC, SS/TC, HHR SS, Ion Redline and Saab 9-3
Page 1 Installation Manual TWM Performance Short Shifter Cobalt SS/SC, SS/TC, HHR SS, Ion Redline and Saab 9-3 Please Note: It is preferable to park on a flat surface, as you will have to engage and disengage
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. SYSTEM S2000 AII 26324 Issue Date OCT 2004 PARTS LIST Headrest Speaker System P/N 08A54-S2A-100 3 Small wire ties 2 Headrest speakers 9
More informationLEXUS GS 350/450h ILLUMINATED DOOR SILLS Preparation
Preparation Part Number: PT922-30120 (GS350) PT922-30130 (GS450h) NOTE: Part number of this accessory may not be the same as the part number shown. Kit Contents Item # Quantity Req'd. Description 1 1 Illuminated
More information1. Front Fascia Removal 1.1 Remove the 6 plastic clips that secure the upper valance, then remove. 1.2 Remove 6 upper bolts that hold the grille and f
STRUT 2015 GMC Denali Collection Installation Manual " 1. Front Fascia Removal 1.1 Remove the 6 plastic clips that secure the upper valance, then remove. 1.2 Remove 6 upper bolts that hold the grille and
More information2000 Mr2 Spyder Seat Cover Replacement Project
2000 Mr2 Spyder Seat Cover Replacement Project Tool List: Plastic Trim Tool, Hog Ring Pliers, Medium or Heavy Duty Wire Cutters, 12mm socket, 14mm Socket, Ratchet, Extension, Flat Head Screwdriver & Gloves
More informationTOYOTA TACOMA XM SATELLITE RADIO Preparation
Preparation Part Number: Mounting Kit PT546-35090 Tuner Assembly 8680-0W03 NOTE: Part number of this accessory may not be the same as the part number shown. Tuner Assembly Kit Contents (8680-0W03) Item
More informationDODGE SLT Installation Instructions
1994-97 DODGE SLT 40-20-40 Installation Instructions Step 1. Driver and Passenger Bottoms/DB&PB: All the parts of the seat cover are labeled inside. Use the seat cover piece identification chart to ID
More informationCOMPONENTS Toyota RAV ACCESSORIES & EQUIPMENT Front Seat - RAV4
2005 ACCESSORIES & EQUIPMENT Front Seat - RAV4 COMPONENTS Fig. 1: Identifying Front Seat Components & Torque Specifications FRONT SEAT ASSEMBLY REMOVAL CAUTION: Wear safety gloves, because the cutting
More informationTOYOTA COROLLA ILLUMINATED DOOR SILLS Preparation
Preparation Part Number: PT942-02140 Kit Contents Item # Quantity Reqd. Description 1 1 Illuminated Scuff plate, Front Right Hand 2 1 Illuminated Scuff plate, Front Left Hand 3 1 Door Scuff plate, Rear
More informationTOYOTA im INTERIOR LIGHT KIT Preparation
Preparation Part Number: PT922-12170 Kit Contents Item # Quantity Reqd. Description 1 1 Main Wire Harness 2 1 Switch 3 1 Switch Header 4 1 ECU 5 1 ECU Bracket 6 1 Hardware Kit 7 1 Instruction Card 8 1
More informationInstallation Instructions for the EVO3 Height-Adjustable Ultimate Short Shifter. for F80 M3 and F82 M4
Installation Instructions for the EVO3 Height-Adjustable Ultimate Short Shifter for 2013+ F80 M3 and F82 M4 part number USSF80 Thank you for purchasing the Ultimate Shift Kit. Please read these directions
More informationTOYOTA VENZA 2009 TRAILER WIRE HARNESS Procedure
Part Number: PT791-0T099 Kit Contents Item # Quantity Reqd. Description 1 1 Trailer Wire Harness Module 2 1 4-Flat Harness 3 1 Battery Power Wire Harness 4 1 Mounting Bracket, 4-Flat 5 2 Screw #10-24 6
More informationSCION xb OVERHEAD CONSOLE Preparation. Part Number:
SCION xb 2008 - OVERHEAD CONSOLE Preparation Part Number: 08253-12800 Kit Contents Item # Quantity Reqd. Description 1 1 Overhead Console 2 1 Bracket 3 1 Plastic cover 4 1 Photo Mount Sheet 5 1 Installation
More informationTOYOTA LAND CRUISER 2003 DVD VES
LEXUS LX470 Section I Installation Preparation Part Number: PT296 6002D 03/16 (LC) PT296 6002L 03/16 (LX) Section I Installation Preparation Kit Contents Item # Quantity Reqd. Description 1 1 FPD Assembly
More informationSeat Cover Installation for Bucket Seats
for Bucket Seats Step 1 Headrest Removal Headrests need to be removed prior to installation of the seat cover. Most headrests remove by pressing the adjustment button located at the base of the post (Figure
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. CASSETTE PLAYER 2000 ACCORD (EX) 2- AND 4-DOOR All 20497 Issue Date JULY 1999 PARTS LIST Cassette Player Attachment Kit Except V6: P/N 08B12-S84-100
More informationSCION xb AUTO-DIMMING MIRROR Preparation
Preparation Part Number: PT374-02090 Kit Contents Item # Quantity Reqd. Description 1 1 AD Mirror Assembly w/ PRNDL 2 1 Hardware bag Hardware Bag Contents Item # Quantity Reqd. Description 1 2 T-tap Connectors,
More informationPart Number: PT
Preparation Part Number: PT374-02090 Kit Contents Item # Quantity Reqd. Description 1 1 Auto Dimming Mirror Assembly w/ shift area light 2 1 Hardware bag Hardware Bag Contents Item # Quantity Reqd. Description
More informationTOYOTA VENZA 2009 TRAILER WIRE HARNESS Procedure
Part Number: PT791-0T099 Kit Contents Item # Quantity Reqd. Description 1 1 Trailer Wire Harness Module 2 1 4-Flat Harness 3 1 Battery Power Wire Harness 4 1 Mounting Bracket, 4-Flat 5 2 Screw #10-24 6
More informationYOU CAN DO IT: SPITFIRE SEAT RE-COVERING STEP-BY
YOU CAN DO IT: SPITFIRE SEAT RE-COVERING STEP-BY BY-STEP TO SAVE TIME, UNBOLT SEATS FROM HINGES... NOTE PLACEMENT OF CLIPS, HOGRINGS BEFORE DISASSEMBLY. REFER TO OTHER SEAT WHEN IN DOUBT. BEGIN PULLING
More informationSCION tc Navigation System Preparation. Part Number: PT
Preparation Part Number: PT611-21111 Kit Contents Item # Quantity Reqd. Description 1 1 Navigation System 2 1 GPS Antenna 3 1 Bluetooth Antenna 4 1 Wire Harness (Reverse / Park Brake) 5 1 RCA Relay Cable
More informationInstallation Instructions for the EVO3 Height-Adjustable Ultimate Short Shifter
Installation Instructions for the EVO3 Height-Adjustable Ultimate Short Shifter for 1992-2005 325, 323, 318 and 1986-1994 525, 528, 535, 540 5-speed models only. (part number USSE3 and USSE5) Thank you
More informationDodge opening upper console w/non-opening middle bottom Installation
2009-12 Dodge 40-20-40 opening upper console w/non-opening middle bottom Installation Step 1. Prepare the driver and passenger seat for installation by temporarily removing the headrests. Recline the backrests
More informationLEXUS GX TOWING HITCH Preparation
LEXUS GX460 2014 - TOWING HITCH Preparation Part Number: PT228-60140 Kit Contents Item # Quantity Reqd. Description 1 1 Hitch Assembly 2 1 Wiring Harness Bracket 3 1 Hardware Bag 4 1 Hitch Cover 5 2 Center
More informationLEXUS RC 350/RC-F ILLUMINATED DOOR SILLS Preparation
Preparation Part Number: PT944-24150 Kit Contents Item # Quantity Reqd. Description 1 2 Inner LED Scuff 2 2 Outer Scuff 3 1 Hardware Bag Hardware Bag Contents Item # Quantity Reqd. Description 1 15 20
More informationInstallation Instructions Harley-Davidson Saddlebag Lids
Installation Instructions Harley-Davidson Saddlebag Lids Thank you for your purchase of Bagger Audio Saddlebag Lids for your Harley- Davidson motorcycle. We have carefully engineered these products to
More informationFabric Replacement Top and Doors with Tinted Side and Rear Curtains Installation Instructions
Fabric Replacement Top and Doors with Tinted Side and Rear Curtains Installation Instructions For: Wrangler/TJ 1997-2002 Part Number: 51124 www.bestop.com DO NOT INSTALL THIS PRODUCT ON ANY VEHICLE OTHER
More informationLEXUS CT 200h ILLUMINATED DOOR SILLS Preparation
Preparation Part Number: PT922-89100 Kit Contents Item # Quantity Req'd. Description 1 1 Door Sill, Front Right Hand 2 1 Door Sill, Front Left Hand 3 1 Door Sill, Rear Right Hand 4 1 Door Sill, Rear Left
More informationSCION xb EC REARVIEW MIRROR Preparation
Preparation Part Number: PT374-02090 Kit Contents Item # Quantity Reqd. Description 1 1 AD Mirror Assembly w/ PRNDL 2 1 Hardware bag Hardware Bag Contents Item # Quantity Reqd. Description 1 2 T-tap Connectors,
More informationTOYOTA Yaris Hatchback EC REARVIEW MIRROR Preparation
Preparation Part Number: PT374-02090 Kit Contents Item # Quantity Reqd. Description 1 1 Auto Dimming Mirror Assembly w/ shift area light 2 1 Hardware bag Hardware Bag Contents Item # Quantity Reqd. Description
More informationTOYOTA TACOMA EC REARVIEW MIRROR Preparation
Preparation Part Number: PT374-35052 Kit Contents Item # Quantity Reqd. Description 1 1 AD Mirror Assembly 2 1 Hardware bag Hardware Bag Contents Item # Quantity Reqd. Description 1 1 T-tap Connectors,
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. CD CHANGER ATTACHMENT KIT 2005 CIVIC SI AII 27936 Issue Date AUG 2004 PARTS LIST CD Changer Attachment Kit (sold separately): P/N 08B26-S5T-100
More informationSCION xa 2004 SATELLITE RADIO TUNER Section I Installation Preparation
Section I Installation Preparation Part Number: PT546 52040 Section I Installation Preparation Kit Contents Item # Quantity Reqd. Description 1 1 Satellite Tuner 2 1 Ground Cable 3 1 Tuner Cable 4 2 Tuner
More informationTOYOTA COROLLA ILLUMINATED DOOR SILLS Preparation
Preparation Part Number: PT942-02140 Kit Contents Item # Quantity Reqd. Description 1 1 Illuminated Scuff plate, Front Right Hand 2 1 Illuminated Scuff plate, Front Left Hand 3 1 Door Scuff plate, Rear
More informationSCION xb HEADREST DVD RSE Section I Installation Preparation. Part Number: PT
Section I Installation Preparation Part Number: PT900-52080 Kit Contents Item # Quantity Reqd. Description 1 2 DVD Headrest Unit 2 2 Headrest Extension Cables 3 1 Audio Interface Module 4 1 Audio Interface
More informationTOYOTA FJ CRUISER 2007 AUXILIARY LIGHTS Preparation
TOYOTA FJ CRUISER 2007 AUXILIARY LIGHTS Preparation Part Number: PT297-35061 Kit Contents Item # Quantity Reqd. Description 1 2 Driving Lamp Assembly 2 1 Switch Harness 3 1 Lamp Harness 4 2 Stone Shield
More informationInstructions for repairing the F-Body Hatch Pull-Down Unit By Lon Salgren (ls90rs)
Instructions for repairing the 1986-87 F-Body Hatch Pull-Down Unit By Lon Salgren (ls90rs) Lonsal@adelphia.net CAUTION: Completely read and understand the instructions before proceeding. There are some
More informationScion xa SATELLITE RADIO TUNER Preparation
Preparation Part Number: PTS31-00051 Kit Contents Item # Quantity Reqd. Description 1 1 Antenna, Interior 2 1 Antenna Tape Pad 3 1 Wire Harness 4 1 Bracket, Floor 5 3 Hardware Bags 6 3 Templates 7 1 SIRIUS
More informationSCION xa AUTO-DIMMING MIRROR Preparation
Preparation Part Number: PT374-52040 (Compass) PT374-21050 (Homelink) Kit Contents Item # Quantity Reqd. Description 1a 1 AD Mirror Assembly w/compass & Map Lights (P/N PT374-52040) 1b 1 AD Mirror Assembly
More informationInstallation Manual TWM Performance Short Shift Kit Stage 1 and Stage 2 MazdaSpeed 6
Page 1 Installation Manual TWM Performance Short Shift Kit Stage 1 and Stage 2 MazdaSpeed 6 Please Note: It is preferable to park on a flat surface, as you will have to engage and disengage the hand brake
More informationTOYOTA TUNDRA TVIP V4 REMOTE ENGINE STARTER (RES)
Preparation Part Number: 08586-OC910 Conflicts Do not install into vehicles without RKE systems. Recommended Sequence of Application Item # Accessory 1 TVIP/RES Any TVIP or RES system 2 XM Radio NOTE:
More informationTOYOTA COROLLA EC REARVIEW MIRROR Preparation
Preparation Part Number: PT374-02090 Kit Contents Item # Quantity Reqd. Description 1 1 AD Mirror Assembly w/ PRNDL 2 1 Hardware bag Hardware Bag Contents Item # Quantity Reqd. Description 1 2 T-tap Connectors,
More informationTOYOTA 4RUNNER CROSS BARS Preparation
Preparation Part Number: PT78-8970 Kit Contents Front Crossbar Assembly Rear Crossbar Assembly Hardware Bag Hardware Bag Contents Rubber Stopper 4 M6 Wafer Head Screw Load Label, 60kg 4 User Manual Additional
More informationINSTALLATION INSTRUCTIONS
Rear Vision System Tailgate Emblem Camera Mirror Display 2009-Current Ford F-150 and 2010-Current Super Duty (Kit part number 1008-9527) Kit Contents: Mirror Tailgate Emblem Mount with Camera Interior
More informationSEAT COVER INSTALLATION MANUAL
SEAT COVER INSTALLATION MANUAL for Bucket Seats Step 1 Headrest Removal Headrests need to be removed prior to installation of the seat cover. Most headrests remove by pressing the adjustment button located
More informationSunroof Repair. Sunroof Repair TSB. The sunroof repair kit available for the J30 is part number Y20. See images at bottom of document.
Sunroof Repair This document is the text/images from the TSB (technical service bulletin) issued by Infiniti concerning the repair procedure for sunroof issues. Be advised that this is a LARGE, TIME-CONSUMING
More informationService Manual Air Tech Second Stage
Service Manual Air Tech Second Stage Copyright 2002, Cressi-sub Revised 3/2002 2 Air Tech Second Stage Service Manual Contents BEFORE STARTING... 3 DISASSEMBLY... 3 PARTS CLEANING AND LUBRICATION... 9
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. AII 26031 2004 ODYSSEY Issue Date AUG 2003 NOTE: You cannot install the subwoofer in a vehicle equipped with both an under seat Navigation
More informationThe Go Baby Go Build Manual
The Go Baby Go Build Manual The step-by-step guide to creating your own Go Baby Go Car 4488 Shockwave Robotics and Pacific University Index 1. List of Mat erials 2. Mechanical Assembly a. Installing the
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS FUEL SURGE TANK INSTALLATION KIT 1999-2006 BMW E46 COUPE Document# 19-0056 Support: info@radiumauto.com Note: This kit was designed for a standard single pump Radium Engineering
More informationInstallation Instructions Cable Top Twill Replace-a-top with Tinted Windows Upper Door Skins not included
Installation Instructions Cable Top Twill Replace-a-top with Tinted Windows Upper Door Skins not included Vehicle Application Jeep Wrangler (JK) 2 Door 2011 and newer Part Number: 79846 Will fi t 54722
More informationSMART ELECTRIC TAILGATE LIFT SYSTEM Document # Created ACH 09/19/2018 Revised ACH 10/02/18 A2
Document #730141 Created ACH 09/19/2018 Revised ACH 10/02/18 A2 General Applicability: 2018- KIA Sedona Issues N/A Kit Contents: Item# Component Description 1 Stay Bar (Strut)(right) 2 Stay Bar (Strut)(left)
More informationINSTALLATION INSTRUCTIONS INFINITI CELLPORT UNIVERSAL HANDS FREE SYSTEM
INSTALLATION INSTRUCTIONS 1. DESCRIPTION: INFINITI CELLPORT UNIVERSAL HANDS FREE SYSTEM 2. APPLICATION: 2002 Q45 3. PART NUMBER: 948T3CELLR95 (VPC) or 999Q2TN000 (PDC) 4. TOOLS REQUIRED: a. Loctite 242
More informationInstallation Guide for Rough Country 30 in. Chrome Series LED Light Bar w/ Hood Mounting Brackets
Installation Guide for Rough Country 30 in. Chrome Series LED Light Bar w/ Hood Mounting Brackets Installation Time: 1 Hour Tools Required Trim removal tool (plastic or wood to prevent scratches on the
More informationTOYOTA RAV TRAILER WIRE HARNESS Section I Installation Preparation
Section I Installation Preparation Part Number: 08921-42900 Kit Contents Item # Quantity Reqd. Description 1 1 Converter 2 1 Wire harness 3 1 Sub wire harness No.1 4 2 Plastic Tie (300mm) 5 21 Plastic
More informationBUICK SKYLARK & GS CHEVROLET CHEVELLE & MONTE CARLO PONTIAC GTO & LEMANS OLDSMOBILE CUTLASS & 442
28433 HWY 65 NE ISANTI, MN 55040 763-444-5880 800-828-2212 www.autocityclassic.com 1970-1972 GM A-BODY 2DR COUPE, INSTALLATION HARDTOP & CONVERTIBLE INSTRUCTIONS POWER WINDOW INSTALL KIT BUICK SKYLARK
More informationTOYOTA TUNDRA TVIP V4 Preparation
Preparation Part Number: PT398-00100 PT398-00100-AA Conflicts Do not install into vehicles without RKE system. Recommended Sequence of Application Item # Accessory 1 TVIP/RES Any TVIP or RES system 2 XM
More informationPRELIMINARY INSTALLATION INSTRUCTIONS. 8 Wire ties. PARTS LIST CD Changer Attachment Kit (sold separately): P/N 08B26-S9V-100A
INSTALLATION INSTRUCTIONS Accessory Application Publications No. ATTACHMENT KIT (LX) 2006 PILOT All 30489 Issue Date SEP 2005 PARTS LIST CD Changer Attachment Kit (sold separately): P/N 08B26-S9V-100A
More informationSCION tc ILLUMINATED DOOR SILLS Preparation
Preparation Part Number: PTS21-21070 Kit Contents Item # Quantity Reqd. Description 1 2 Hardware Kit w/ power harness 2 1 Front Left Illuminated Door Sill Protector 3 1 Front Right Illuminated Door Sill
More information7. Side Airbag Module
AIRBAG SYSTEM Side Airbag Module 7. Side Airbag Module A: REMOVAL Refer to CAUTION of General Description before handling the airbag module. NOTE: Remove
More informationTOYOTA SOLARA CONVERTIBLE XM SATELLITE RADIO Preparation. Part Number: Mounting Kit PT
Preparation Part Number: Mounting Kit PT546-06061 Tuner Assy 86180-0W030 Tuner Assy Kit Contents (86180-0W030) 1 1 Tuner Assy, Stereo Component Mounting Kit Contents (PT546-06061) 1 Ground Cable 1 1 Wire,
More informationTOYOTA SIENNA TRAILER WIRE HARNESS Preparation
Preparation Part Number: PT791-08150 (non-se) PT791-08102 (SE only) Kit Contents Item # Quantity Reqd. Description 1 1 Trailer Module Harness 2 1 4-Flat Harness 3 1 Battery Power Wire Harness 4 1 Mounting
More informationInstallation Instructions INDY SHIFTER Fits: Mustang Fastback & Convertible with MT-82 Transmission Catalog #
Installation Instructions INDY SHIFTER Fits: 2015-2018 Mustang Fastback & Convertible with MT-82 Transmission Catalog # 3916036 Watch our installation video on YouTube WORK SAFELY! For maximum safety,
More informationTOYOTA RAV4/HV INTERIOR LIGHT KIT Preparation
Preparation Part Number: PT413-42130 Kit Contents Item # Quantity Reqd. Description 1 1 Wire Harness 2 3 Hardware Bag Contents Item # Quantity Reqd. Description 1 20 Cable Tie 2 2 Scotchlok 3 2 Foam Pad
More informationSCION im PREMIUM AUDIO Preparation
SCION im 2016 - PREMIUM AU Preparation Part Number: PT296-12160 (Extension Module w/ AHA) Kit Contents Item # Quantity Reqd. Description 1 1 Extension Module 2 1 BT cable 3 1 DA/Ext Harness 4 1 GPS Antenna
More informationInstallation Instructions Fabric Replacement Top with Tinted Side
Installation Instructions Fabric Replacement Top with Tinted Side and Rear Windows Upper Door Skins not included Vehicle Application Jeep Wrangler Unlimited TJ 2004 2006 Part Number: 79140 www.bestop.com
More informationTOYOTA TACOMA TVIP V5
Preparation Part Number: PT398-35090 Kit Contents Item # Quantity Reqd. Description 1 1 Wire Harness 2 1 Security ECU 3 1 GBS ECU 4 1 Status Monitor/Microphone 5 2 Warning Labels (English) 6 2 Warning
More informationSCION FR-S CENTER ARMREST Preparation
Preparation Part Number: PT478 18130 Kit Contents Item # Quantity Reqd. Description 1 1 LH Bracket 2 1 RH Bracket 3 1 LH Extrusion 4 1 RH Extrusion 5 1 Slide Assembly 6 4 4.0mm PT (Torx) Screws 7 1 Armrest
More informationInstallation Instructions for 2018 Jeep Grand Cherokee Laredo & Altitude and 2018 Dodge Durango SXT & SXT Plus
Thank you for purchasing the SmartStopStart module! Please read this important information and keep this document with your vehicle owner's manual. Installation Instructions for 2018 Jeep Grand Cherokee
More informationGENUINE PARTS INSTALLATION INSTRUCTIONS
GENUINE PARTS INSTALLATION INSTRUCTIONS 1. 2. 3. 4. DESCRIPTION: Accent light Kit APPLICATION: Versa (2012) PART NUMBER: 999F3 AW008 - Universal Accent Lighting Kit. KIT CONTENTS: Item QTY Description
More informationInstallation Manual TWM Performance Short Shift Kit 2003 And Up Saturn Ion
Installation Manual TWM Performance Short Shift Kit 2003 And Up Saturn Ion It s preferable to park on a flat surface, as you may have to engage and disengage the hand brake and shift from gears to neutral.
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. AII 22903-22963 ODYSSEY Issue Date MAY 2002 PARTS LIST Subwoofer Kit: P/N 08A39-EP7-100 Subwoofer 2 Cushion tapes 8 Wire ties (1 not used)
More informationPART NUMBER: H630SSJ000. Kit Contents: A. Amplifier with Bracket (1) D. Badge (2) with push nuts (4)
Kit Contents: A. Amplifier with Bracket (1) D. Badge (2) with push nuts (4) E. Clip B. Harness (1) C. Cable tie (8) F. Mounting Hardware (2) G. Replacement Speaker (2) H. HVAC Duct extension (2) IMPORTANT:
More informationTOYOTA SOLARA EC REARVIEW MIRROR Section I - Installation Preparation
Section I - Installation Preparation Part Number: PT374-33020 Section I - Installation Preparation Kit Contents Item # Quantity Reqd. Description 1 1 AD Mirror Assembly w/compass 2 1 Hardware Bag 3 1 Installation
More informationEvo X Walbro 450 Pump System
Evo X Walbro 450 Pump System Installation Guide Please contact us at sales@wtftuned.com with any additional questions Tools required: 8 mm socket and wrench, needle-nose pliers, razor, drill w/ 5/64 bit,
More informationTOYOTA HIGHLANDER TRAILER WIRE HARNESS Preparation
Preparation Part Number: PT219-48111 Kit Contents Item # Quantity Reqd. Description 1 1 Converter 2 1 Flat 4-pin wire harness 3 5 Plastic tie 4 1 Special plastic tie for stud mount 5 1 Packing 6 2 Bolt
More informationLEXUS IS250/350 CONVERTIBLE WIND SCREEN Preparation
Preparation Part Number: PT933-53100 NOTE: Part number of this accessory may not be the same as the part number shown. Kit Contents Item # Quantity Reqd. Description 1 1 Wind screen 2 1 Installation Instructions
More informationiphone 5s Upper Component Cable Replacement
iphone 5s Upper Component Cable Replacement Use this guide to replace the upper component cable containing the flash, microphone and sleep/power button cable. Written By: Sam Lionheart ifixit CC BY-NC-SA
More informationIf technical support is required, please contact Advent Technical Support at
Document 128-9015A Created 12/12/11 Kit Contents: Item # Qty. Component Description 1 2 Headrest Assembly 2 2 Cables # 3 3 1 Power Cord # 9 4 1 FM Antenna 5 1 Control Box 6 2 IR Headphones 7 2 Remote Control
More informationOIL COOLER KIT INSTALLATION INSTRUCTIONS PART NUMBER D
OIL COOLER KIT INSTALLATION INSTRUCTIONS PART NUMBER D570-0904 APPLICATION: 2011-2012 E90 335i/xi (N55 engine) with BMW standard bumper and with stock oil cooler Congratulations for being selective enough
More information991 ROLL BAR INSTALLATION:
991 ROLL BAR INSTALLATION: We highly recommend CMS roll bars be fitted by shops with experience in installing roll bars. 1. Move power seats to a location where the four bolts can be removed and remove
More informationTECHNICAL INSTRUCTIONS FOR NONCOMPLIANCE E0B SEAT HEATER ASSEMBLIES CERTAIN SIENNA
TECHNICAL INSTRUCTIONS FOR NONCOMPLIANCE E0B SEAT HEATER ASSEMBLIES CERTAIN 2013-2014 SIENNA I. OPERATION FLOW CHART The flow chart is for reference only. DO NOT use it in place of the full technical instructions.
More informationGENUINE PARTS INSTALLATION INSTRUCTIONS
GENUINE PARTS INSTALLATION INSTRUCTIONS 1. DESCRIPTION: Auto-Dimming Mirror with Compass and Homelink 2. APPLICATION: Juke (2011) 3. PART NUMBER: 999L1 VW002 4. KIT CONTENTS: Item Qty Description Service
More informationThe M7 Direct Flow Intercooler (DFIC) Installation Guide
The M7 Direct Flow Intercooler (DFIC) Installation Guide This information is meant only as a guide. The author of this information,, or any M7 Tuning employees assumes no liabilities for any outcomes resulting
More informationINSTALLATION INSTRUCTIONS Toyota FJ Cruiser DEMELLO-OFFROAD.
INSTALLATION INSTRUCTIONS Item Description Vehicle 3 piece Rear Bumper 2007-2014 Toyota FJ Cruiser DEMELLO-OFFROAD www.demello-offroad.com 12785 magnolia ave Riverside ca 92503 Suite 1 phone: 1-951-735-4417
More informationFront seats. j a t CAUTION! Before beginning repairs on the electrical system: Obtain the anti-theft radio security code. Switch the ignition off.
j a t Front seats 72-1 CAUTION! Before beginning repairs on the electrical system: Obtain the anti-theft radio security code. Switch the ignition off. Search Advanced Search Disconnect the battery Ground
More informationSupertop Replacement Top with Tinted Side and Rear Windows Installation Instructions
Supertop Replacement Top with Tinted Side and Rear Windows Installation Instructions TM Inc. For: Wrangler TJ 1997 2002 Part Number: 55629 Does Not Include Hardware This product is only designed for the
More informationTOYOTA Matrix XM SATELLITE RADIO Preparation
Preparation Part Number: Mounting Kit PT546-12080 Tuner Assembly 86180-0W031 (Music Only) Tuner Assembly PT546-00090 (Music Plus Data) NOTE: Part number of this accessory may not be the same as the part
More informationOIL COOLER KIT INSTALLATION INSTRUCTIONS PART NUMBER D E92 335is (N54 engine) with BMW M-Technic bumper and with stock oil cooler
OIL COOLER KIT INSTALLATION INSTRUCTIONS PART NUMBER D570-0923 APPLICATION: 2011 E92 335is (N54 engine) with BMW M-Technic bumper and with stock oil cooler Congratulations for being selective enough to
More informationTOYOTA AVALON EC REARVIEW MIRROR
Section I - Installation Preparation Part Number: PT732-07000 Section I - Installation Preparation Kit Contents Item # Quantity Reqd. Description 1 1 Full Mirror Assembly, Compass 2 1 Hardware Bag 3 1
More informationTru-Billet Climate Control Knob Installation Instructions
P/N S197-525-07 2007-08 Tru-Billet Climate Control Knob Installation Instructions Thank you for your purchase of SilverHorse Racing products. Please read all directions before beginning the installation.
More informationPart Number: Code: CM5
Document # 3899 2/20/06 SOUTHEAST TOYOTA CAMRY 2007 - EC MIRROR W/HOMELINK Preparation Part Number: 00016-07005 Code: CM5 Kit Contents 1 1 AD Mirror Assembly w/ HomeLink and Compass 2 1 Hardware bag 3
More informationSCION xb 2004 SATELLITE RADIO TUNER Section I Installation Preparation
Section I Installation Preparation Part Number: PT546 52040 Section I Installation Preparation Kit Contents Item # Quantity Reqd. Description 1 1 Satellite Tuner 2 1 Ground Cable 3 1 Tuner Cable 4 2 Tuner
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS FUEL SURGE TANK INSTALLATION KIT 1999-2006 BMW E46 COUPE Document# 19-0056 Support: info@radiumauto.com Note: This kit wasn t designed for a FST-R, but can be accomplished. 1.
More informationInstallation Manual TWM Performance Short Shifter Subaru STi 2008+
- 1 - Installation Manual TWM Performance Short Shifter Subaru STi 2008+ Please Note: It is preferable to park on a flat surface, as you will have to engage and disengage the hand brake and shift from
More informationFull Top Deck Kit. Installation Instructions
Full Top Deck Kit For: De fe nde r 90 1997 Model Year Installation Instructions Pa rt Num be r: 71741AM WARNING Installation Tips This product is designed primarily to enhance the appearance of the vehicle
More informationInstallation Instructions Supertop for Truck
Installation Instructions Supertop for Truck US Patent 6827391 Vehicle Application: Toyota Tacoma Double Cab 2005-2011 (5 ft.) Part Number: 76308 INSTALLATION TIME SKILL LEVEL 1-1/2 Hours 2 - Moderately
More informationRedlineGoods Tacoma Installation Manual
RedlineGoods 2016+ Tacoma Installation Manual AUTOMATIC SHIFT BOOT AND EBRAKE BOOT Press down on the factory shift boot collar to disconnect it from the shift knob. Unscrew shift knob Pull up on the rear
More informationECO-SERIES REAR BUMPER FORD F150 PART # FD-2962
15-16 FORD F150 PART # FD-2962 Body Armor 4x4 272 Corporate Terrace St. Corona, CA 92879 951-808-0750 Customer Service hours: M-TH: 7:30am to 4:30 PM Pacific Time Friday: 8 AM Noon Pacific Time PARTS LIST:
More information