Recreational Kick Scooters, Warnings, Specifications & Instructions

Transcription

1 MODEL NUMBER ASSEMBLY NUMBER RAILZ SCOOTER MODELS COVERED BY THESE INSTRUCTIONS UPC DESCRIPTION Youth Snow Scooter Silver/Red Youth Snow Scooter Black/Red Full Size Snow Scooter Silver/Red Full Size Snow Scooter Black/Blue RIDER AGE RIDER WEIGHT 200 lbs. (91kg) MAX 200 lbs. (91kg) MAX 200 lbs. (91kg) MAX 200 lbs. (91kg) MAX WARNINGS 1. Always wear safety equipment such as helmet, knee pads and elbow pads. Always wear a helmet when riding your scooter and keep the chinstrap securely buckled. Always wear shoes. 2. Ride on smooth, paved surfaces away from motor vehicles. 3. Avoid sharp bumps, drainage grates, and sudden surface changes. Scooter may suddenly stop. 4. Avoid streets and surfaces with water, sand, gravel, dirt, leaves, and other debris. Wet weather impairs traction, braking, and visibility. 5. Avoid riding on surfaces with exposed soil, rocks and other debris that may contain hidden obstacles. 6. Do not ride at night. 7. Brake will get hot from continuous use. Do not touch after braking 8. Avoid excessive speed associated with downhill rides. 9. Avoid excessively steep terrain. Do not steer straight down a slope, steer across sloped terrain. 10. Adults must assist children in the initial adjustment procedures to unfold scooter, adjust handlebar and steering to height, and finally to fold scooter. 11. Obey all local traffic and scooter riding laws and regulations. 12. Watch out for pedestrians. 13. Watch for other riders. 14. Check and secure all fasteners before every ride. 15. Replace worn or broken parts immediately. 16. To be used under adult supervision. 17. Observe all warning and use at your own risk. 18. Youth Scooters: Ages 5+ and maximum rider weight of 200lbs (91kg). 19. Full Size Scooters: Ages 12+ and maximum rider weight of 200lbs (91kg). Dwg #: Rev G 2004 RAILZ, LLC. All rights reserved Page 1 of 8

2 Overall Length with skis attached Product Weight Adjustable Handle Bar Height, from the ground Adjustable Handle Bar Height, from the deck FEATURES & SPECIFICATIONS " (81 cm) 32" (81 cm) 39" (99 cm) 39" (99 cm) 7 lb. (3.2 kg) 28" - 32" (71-81 cm) 26" - 30" (66-76 cm) 7 lb. (3.2 kg) 28" - 32" (71-81 cm) 26" - 30" (66-76 cm) 8lb. (3.6 kg) 32" - 38" (81 96 cm) 30" - 36" (76-91 cm) 8lb. (3.6 kg) 32" - 38" (81 96 cm) 30" - 36" (76-91 cm) Handle Bar Width 13" (33 cm) 13" (33 cm) 14" (36 cm) 14" (36 cm) Deck Length (overall) 15" (38 cm) 15" (38 cm) 22" (55 cm) 22" (55 cm) Deck Length (footbox) 12" (31cm) 12" (31cm) 18" (46 cm) 18" (46 cm) Product Colors Silver & Red Black & Red Silver & Red Black & Blue Deck Material Aluminum Aluminum Aluminum Aluminum Handle Bar Material Steel Steel Steel Steel Front Fork Material Steel Steel Steel Steel Headtube Angle 80 deg 80 deg 80 deg 80 deg Handle Grips Black EVA Foam Black EVA Foam Black EVA Foam Black EVA Foam Wheel Compatibility mm mm mm mm Grip Tape Foot box area Foot box area Foot box area Foot box area Headtube Clamp Double Stack Double Stack Double Stack Double Stack Skis Red Red Red Blue Ski Brake Black Black Black Black Dwg #: Rev G 2004 RAILZ, LLC. All rights reserved Page 2 of 8

3 HOW TO INSTALL SKIS ON A RAILZ SCOOTER Step 1 Locate the RAILZ Scooter, the two RAILZ Skis, the two axle bolts, and the two 5mm hex keys. Follow instructions on next page to open the RAILZ Scooter. Step 4 Tighten the axle using the two 5mm hex keys. Step 2 Align one of the RAILZ Skis with the front fork axle hole and insert the internal thread axle bolt through the front fork axle hole and the ski bushing. Step 5 Repeat steps 2 and 3 for the rear ski. You may have to depress the RAILZ brake a little to allow the axle bolt to align with the rear fork axle hole. Step 3 Insert the external thread axle bolt through the front fork hole from the other side and thread clockwise into the internal thread bolt. Step 6 Tighten the rear axle bolt using the two 5mm hex keys, and you are ready to ride! Dwg #: Rev G 2004 RAILZ, LLC. All rights reserved Page 3 of 8

4 HOW TO OPEN A RAILZ SCOOTER Step 1 Lift the bail on the lynch pin and swing it away from the pin. Step 4 Insert the lynch pin into the open position hole (upper hole). Step 2 Pull lynch pin out. Step 5 Push lynch pin through the brackets (pin will fit tight and will need to be aligned and manipulated to get pin pushed through the brackets). Step 3 Swing handle bar up to the open position. Step 6 Snap lynch pin bail down over the exposed end of the pin. Proceed to step 7 on page 5. Dwg #: Rev G 2004 RAILZ, LLC. All rights reserved Page 4 of 8

5 HOW TO OPEN A RAILZ SCOOTER Step 7 Locate the safety bolt (attached to scooter in a zip bag). Step 9 Install the threaded bolt from the other side. Step 8 Push the bolt through the bracket as shown. Step 10 Tighten the safety bolt using the 5mm hex wrenches provided. Dwg #: Rev G 2004 RAILZ, LLC. All rights reserved Page 5 of 8

6 HOW TO CONVERT FROM SNOW SCOOTER TO WHEEL SCOOTER Step 1 Remove rear axle bolt using two 5mm hex keys. Step 4 - Remove brake axle bolt using 8mm wrench and 4mm hex key. Step 2 Axle bolt removed from rear ski. Step 5 Brake axle bolt and spring removed from Scooter & Brake. Step 3 Remove front axle bolt using two 5mm hex keys. Step 6 Insert wheel axle bolt through the rear axle mount and wheel (align axle bolt through wheel bearings and internal bearing spacer). Proceed to step 7 on page 7. Dwg #: Rev G 2004 RAILZ, LLC. All rights reserved Page 6 of 8

7 Step 7 Insert axle bolt from opposite side of axle and use two 5mm hex keys to tighten (ensure that wheel still spins freely). Step 10 - Use 4mm hex key with twisting motion to compress spring and allow axle to be pushed through opposite side holes. Step 8 Locate wheel brake, axle, nut and spring. Step 11 Install the 8mm nut on the brake axle bolt and tighten using a 4mm hex key and 8mm wrench. Step 9 Start axle bolt through wheel brake and spring. Step 12 Completed conversion to wheeled scooter, reverse process to convert back to snow scooter. Dwg #: Rev G 2004 RAILZ, LLC. All rights reserved Page 7 of 8

8 Be sure to check out additional instructions at: Check out all these kits & accessories to customize your scooter or skateboard at Item Model Description For use with: mm Red Youth wheel/brake kit RAILZ Youth Snow Scooters, , , & mm Red Adult wheel/brake kit RAILZ Adult Snow Scooters, , , & mm Blue Adult wheel/brake kit RAILZ Adult Snow Scooters, , , & mm Green Pro Wheel/Brake kit RAILZ Pro Snow Scooter, , & Pro-66 Dual ski kit, Green All RAILZ Scooters Pro-66 Dual ski kit, Red All RAILZ Scooters Pro-66 Dual ski kit, Blue All RAILZ Scooters Steel Coiled Safety Lanyard All RAILZ Scooters Snow Brake Kit All RAILZ Scooters Pro-66 Quad ski kit, Green Skateboards and all RAILZ Scooters Pro-66 Quad ski kit, Red Skateboards and all RAILZ Scooters Pro-66 Quad ski kit, Blue Skateboards and all RAILZ Scooters Be a RAILZ Rock-Star and share your videos and photos on all your favorite social media. RAILZ, LLC support@railzusa.com We started RAILZ, so kids and families everywhere could enjoy the outdoors, especially in the winter months. See how you can have fun at Dwg #: Rev G 2004 RAILZ, LLC. All rights reserved Page 8 of 8